Search Results

Search found 13401 results on 537 pages for 'external monitor'.

Page 1/537 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Monitor not detected after booting without monitor attached (12.04)

  - by cawkie

  I had a stable 12.04 machine running perfectly. The machine was booted without the monitor connected - since then the system always boots to low graphics mode. Onboard graphics (from lspci): VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03) Monitor: AOC e2450Swh Display widget shows monitor as laptop(!?) and system details shows graphics as Gallium 0.4 on llvmpipe (LLVM 0x300) X-server log appears to show correct monitor detected. When I boot from a live CD I get full 3d graphics I've tried the monitor on a different machine - all OK. I've tried a different monitor on this machine - same problem. Between having a working system and a broken one there have been no updates and I have made no configuration changes... EDIT: I have come to the conclusion that the problem is caused by a known issue with lightDM hanging on battery check. I've managed to get 3D graphic working by switching to using GDM - not a solution but acceptable workaround. I would still like to know what is causing the problem and how I managed to get my system into this state!

  Read the article

• System monitor network speed monitor not working for LAN but works for my Wi-fi

  - by Pavak

  I'm on Ubuntu 13.10. I generally use wi-fi to connect to the internet. But Yesterday my wi-fi router occurred some problem and now it's out for warranty. So temporarily I'm using LAN. System monitor displayed the network speed correctly when I was in wi-fi. But now it's not showing any kinda network speed in System Monitor. I checked the preferences opption but couldn't find a way. I also checked "ksysguard"(KDE's system monitor) and conky. None of them working. How can i solve this? I'm attaching a screenshot to clear the problem.

  Read the article

• My Linux desktop sees my HDMI-connected monitor, but my monitor says "No signal"

  - by hrunting

  I have a Gigabyte H55M-UD2H motherboard and an Acer S271HL monitor. When I connect the monitor to the motherboard via VGA, signal works perfectly. When I connect the monitor via HDMI, the system "sees" the connection, but the monitor receives no signal (the monitor shows a blue box which reads "No Signal" and then the monitor goes into power-saving state). Some fun facts about this: if I hook a different monitor to this box via HDMI, the monitor receives the output without issue (same computer/motherboard, same cable, different monitor) if I connect a different computer to the monitor via HDMI, the monitor receives the output without issue (different computer, same cable, same monitor) no signal is received whether in the OS or in the BIOS there are no BIOS options for controlling video output other than for selection of onboard vs. PCI/PCI-E-based video card (the system has no dedicated video card installed) The box is running Linux, so I have the output of xrandr which shows the connection and the monitor modes detected via DDC: ~$ xrandr --prop Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192 VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: force-dvi off auto on DP1 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: force-dvi off auto on HDMI2 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 598mm x 336mm EDID: 00ffffffffffff000472ca028d128022 1c160103803c2278ca7b45a4554aa227 0b5054bfef80714f8140818081c08100 9500b300d1c0023a801871382d40582c 450056502100001e000000fd00384c1f 5311000a202020202020000000fc0053 323731484c0a202020202020000000ff 004c55573044303130383531300a01e5 020324f14f0102030405060790111213 1415161f230907078301000067030c00 1000382d023a801871382d40582c4500 56502100001f011d8018711c1620582c 250056502100009f011d007251d01e20 6e28550056502100001e8c0ad08a20e0 2d10103e960056502100001800000000 000000000000000000000000000000de Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: force-dvi off auto on 1920x1080 60.0*+ 50.0 25.0 30.0 1680x1050 59.9 1680x945 60.0 1400x1050 74.9 59.9 1600x900 60.0 1280x1024 75.0 60.0 1440x900 75.0 59.9 1280x960 60.0 1366x768 60.0 1360x768 60.0 1280x800 74.9 59.9 1152x864 75.0 1280x768 74.9 60.0 1280x720 50.0 60.0 1440x576 25.0 1024x768 75.1 70.1 60.0 1440x480 30.0 1024x576 60.0 832x624 74.6 800x600 72.2 75.0 60.3 56.2 720x576 50.0 848x480 60.0 720x480 59.9 640x480 72.8 75.0 66.7 60.0 59.9 720x400 70.1 HDMI3 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: force-dvi off auto on DP2 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: force-dvi off auto on DP3 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: force-dvi off auto on How do I get this monitor to recognize the output from this HDMI socket?

  Read the article

• Using External Monitor with Laptop Monitor as separate monitors

  - by user14623

  I am trying to use 32"LCD monitor with my ubuntu 10.10 installation. I am trying to use my laptop screen and external monitor at the same time but having two separate desktops. I also want to use my laptop with 1280x800 resolution and external one with 1920 x 1080 using VGA. However, ubuntu sees my external LCD as a CRT and provide 13....x... resolution at the best not above. My graphics card driver is Nvidia 270.... driver. Is ubuntu capable of using two monitors separately or should i give up? Thank you

  Read the article

• Disabling monitor reconfiguration when closing lid

  - by Tomas

  I often need to move my laptop from one working place to another. When I do this, there are two events Ubuntu responds to by changing the monitor set up: Removing/attaching the VGA cable Closing/opening the lid of the laptop While removing the VGA cable gives me what I need (single screen, highest native resolution on the external screen if connected; otherwise highest resolution on the laptop), the laptop close/open lid response is not as good. Every time I close or open the lid, Ubuntu reconfigures the monitor set up. When I close the lid now... the screen goes black for a few seconds and it switches to clone, with my laptop screen disabled. Reopening results in... briefly a black screen, then the external monitor being used as desktop extension. Ubuntu thinks too much. My first and foremost question: Is there any way to let Ubuntu ignore lid close events? Ideally (or when there's no way to solve above question) I'd want to change how it deals with the screen reconfiguration. Why does Ubuntu toggle the screen configuration between external, clone and single display? Can't I just configure it to always use the external monitor, when present, in single screen mode? Note that similar questions have been asked before (most notably this one), but these have been closed perhaps wrongly. Any ideas are very welcome, I don't mind playing around a bit to see if something works.

  Read the article

• Ubuntu 12.04 LTS , Dell d410 output to External Monitor/TV with docking

  - by Gck

  I am not able to see the video output on My external monitor/TV after installing 12.04 LTS. I had the same issue with 11 versions also. This issue does not happen on 10.04 LTS version. This is my setup. Dell latitude D410 with Intel Mobile 915 GM/910GML express controller using the Dell docking station Connecting to my 42inch TV with DVI (from Docking) to HDMI cable (on TV) If i close the lid, some times i am able to see the video output on TV, but the resolution is making the fonts so small, i cannot even see it and when i click displays option to change the resolution, the output goes off completely and it is shown now on the laptop screen. one time, i got the output on both the screens, but i am not able to replicate that scenario even after trying the Fn+F8 key option on my laptop. earlier some time back when i ran version 11.x ubuntu, i was able to get the output on both the screens (basically mirrored output) with large font resolution on my TV using the monitor Test tool as mentioned here :http://www.bigfatostrich.com/2011/05/solved-ubuntu-11-04-broken-external-display/ The problem with this approach is that i have to do it every time i restart the machine and more over the video output is present on both the screens (mirrored), which is of no use. As i stated before, this does not happen with 10.04 LTS. With 10.04 LTS my laptop screen is off automatically and the output is seen on TV/external display. Can anyone share any options that i can try? How can we achieve the behavior of 10.04 LTS with respect to the External display on 12.04 LTS . Thankyou very much for your help in advance.

  Read the article

• Macbook Pro + Windows: How to make external monitor default monitor for games

  - by Linux Jedi

  When I boot into Windows on my Macbook Pro, I am unable to make the external monitor the default monitor. So when I play games full screen, they automatically open up on my laptop monitor. I want them to open up on my secondary monitor. The only solution I found to this is to make my external monitor mirror my laptop monitor. I can't even close the lid of the laptop monitor because that will cause the system to go to sleep.

  Read the article

• External display, windows are moving to external display

  - by hextler

  I use external display with lenovo w520, I am running it with following script xrandr --output LVDS1 --auto --primary --output VIRTUAL --mode 1920x1200 --left-of LVDS1 optirun screenclone -d :8 -x 1 xrandr --output VIRTUAL --off but I have number of problems. All windows are moving on external display If I interrupt this script I cannot run it second time without restarting xorg. yakuake is changing height and does not showing tabs. I cannot make external display primary, in that case I cannot see windows. yakuake is changing height and does not showing tabs. If you know how to solve thisw issues please let me know. Thanks in advance!

  Read the article

• Put one monitor of a dual monitor windows system into standby

  - by Psycogeek

  Standby not Disabled! When running 2 monitors on windows 7 or Windows XP, I would like to be able to put one of the monitors at a time into standby. The method can be manual. When running 2 monitors , the second monitor is not always needed, shutting off the monitors own power switch will turn off the monitor, that does work Ok. Problems with that are , the delay with the monitor logo at turn on, and the power switch is not very accessable, and the switch might not live forever turning it on and off so many times. Using disable methods like devcon, WIN-P and Display, causes all the windows to properly move to the other monitor. While that is what a person would want to happen so they can get hold of the windows, that is not what I want to happen, and some things on the other monitor have to be re-arranged after a re-enable. By putting it into standby mode, nothing changes other than the monitor going into standby. Disconnecting the DVI cable still can cause the system to (properly) shift all the windows over to the one monitor, just like any of the disable methods do. That makes a mess of the windows, and is so unacceptable, that I would prefer to leave the monitor on, wasting power and the hardware, when it could easily go into standby for some time. For both monitors I am using a "MonitorOff" program that puts both monitors into standby, but I can not find a utility that will put only ONE monitor into standby for the windows system. If someone comes along and suggests "ultramon" you must know for a fact that it will put One of either of the monitors into actual standby. And it does not really suit me to use ultramon, I tested it (it was nice) and I did not feel that it was a program I wanted. The 2 monitors are running off of an ATI 4890 card, they are both hooked up DVI-I, the OS is both Windows 7 (primary) and Windows XP. In addition it would also be interesting to have seperate standby activity timers, and follow mouse kind of standby changes, but any manuel method , shortcut, batch , tray, or gadget kind of operation would be a good start.

  Read the article

• Problem with external monitor on my asus u36sd laptop

  - by Abonec

  To connect my laptop to external monitor (for the dual monitor configuration) I have to perform 7 weird steps: Suspend OS (close notebook for that) Connect external monitor to vga output Open notebook and unsuspend OS (at this moment in laptop screen is native resolution but on external monitor resolution is lower than native (not same as at laptop)). Suspend OS (close notebook for that) Open notebook and unsuspend OS (at this moment laptop screen has resolution as a external monitor but external monitor has lower resolution that should be in native) Suspend OS (close notebook for that) Unsuspend OS (at this moment laptop and external monitor have native resolution which will should be) I just open and close hood of the laptop until external monitor and laptop screen become in native resolution. Adjusting monitors in displays not give me proper result. I have ASUS U36SD with optimus (disabled by acpicall) with 1366x768 screen and external monitor with 1280x1024 and latest ubuntu 11.10. How to perform laptop to work with external monitor without this weird actions?

  Read the article

• Output to TV only works if monitor is plugged in

  - by Greg Sansom

  I am trying to use my TV as the sole output for a computer. The computer has a graphics card with 2 outputs - one RGB and one DVI. I have the RGB output going to the TV, and when the DVI output is connected to a monitor, display works fine on both the monitor and the TV. If I turn off the monitor, or even turn off power to the monitor, the TV continues to display the desktop. If I unplug the DVI cable from the monitor (remember that the monitor doesn't have any power at this point), the TV stops presenting the desktop and displays a "Not Accepted" message. When starting up the computer, the TV displays fine, but stops working at the "press ctrl-alt-delete" screen unless the monitor is connected. How can I make the TV show the display without the monitor? The TV is an LG RT-42PZ45V. The graphics card is an ATI Radeon series HD4350 512MB GDDR2. The computer is running Windows Server 2008 r2.

  Read the article

• Win 7 dual monitor: Don't move application windows when turn off second monitor

  - by codewaggle

  The title is correct, it should say "Don't" not "Doesn't". I Don't want the application windows to be moved to the main monitor when I turn off the monitors. On my Win XP dual monitor system, I can turn off the monitors and when I turn them back on, the application windows are in the same locations on the same monitors as when I turned the monitors off. On the Win 7 system, every time I turn off the monitors (or just the second monitor), all of the application windows are moved to the "main" monitor. After experimenting with the settings, I've found one process that enables me to turn off the monitors and still keep my application windows laid out in my chosen locations on the two monitors: 1) Switch the display setting to a single monitor. 2) Turn off the monitors. 3) Turn on the monitors. 4) Switch the display setting back to "Extend these Displays". After step 4, the application windows that I had laid out on the second monitor are moved back to their original locations on the second monitor. Is there a windows or nVidia setting that would leave the application windows on the second monitor so that I don't need to switch the display settings every time I turn off the monitors? Specs: Windows 7 64-bit dual monitors (1 DP, 1 DVI) Desktop (most questions seem to be about laptops) nVidia Quadro 2000 nVidia Control Panel nVidia nView Control Panel

  Read the article

• Monitoring Your Servers

  - by Grant Fritchey

  If you are the DBA in a large scale enterprise, you’re probably already monitoring your servers for up-time and performance. But if you work for a medium-sized business, a small shop, or even a one-man operation, chances are pretty good that you’re not doing that sort of monitoring. You know that you’re supposed to be doing it, but other things, more important at-the-moment things, keep getting in the way. After all, which is more important, some monitoring or backup testing?  Backup testing, of course. Monitoring is frequently one of those things that you do when can get around to it.  Well, as you can see at the right, I have your round tuit ready to go. What if I told you that you could get monitoring on your servers for up-time, job completion, performance, all the standard stuff? And what if I told you that you wouldn’t need to install and configure another server in your environment to get it done? And what if I told you that you’d be able to set up and customize your alerts so you could know if your server was offline or a drive was full? Almost nothing for you to do, and you’ll have a full-blown monitoring process. Sounds to good to be true doesn’t it? Well, it’s coming. We’re creating an online, remote, monitoring system here at Red Gate. You’ll be able to use our SQL Monitor tool (which you can see here, monitoring SQL Server Central in real time) to keep track of your systems, but without having to set up a server and a database for storing the information collected. Instead, we’re taking advantage of services available through the internet to enable collection and storage of this information remotely, off your systems. All you have to do is install a piece of software that will communicate between our service and your servers and you’ll be off and running. It’s that easy. Before you get too excited, let me break the news that this is the near future I’m talking about. We’re setting up the program and there’s a sign-up you can use to get in on the initial tests.

  Read the article

• Dual Monitor setup issues between laptop and external led monitor

  - by Julian

  I have two challenges. Monitor will not connect to laptop through HDMI Watching HD video content causes the laptop to sometimes turn off expecially when I'm streaming from tekzilla.com Setup. I got my new HP 2311x LED LCD monitor this week and I have it running as the main monitor extended by the 15 inch screen on my Dell Studio 1558. Right now I have to connect the external monitor through VGA. For the HDMI connection issue. I suspect that either the appropriate drivers are not installed because I don't see any hdmi device in the device manager. I've checked and I don't see any hdmi specific drivers listed online. For the shut down issue, I suspect the laptop might be overheating. Not sure why it would. It never did that while I watched movies on my laptop's default screen. My Laptop Configuration: 15" led lcd screen at 1366 x 768 intel i5 processor integrated graphics card 4 GB DDR3 RAM 500 GB hard drive I've tried everything from switching the source on my monitor to hdmi to start up combinations and nothing has worked. What could be the issue and how do I solve it?

  Read the article

• Nvidia driver overscan issue second monitor via dvi-d cable

  - by benmichael

  Ok, I know that I have a bit of a bizarre setup, but here goes. I have an old laptop, HP Pavilion 6000. The graphics card in there is a GeForce 7150M. The monitor connection is an old 18pin. The external monitor I use is a Samsung SyncMaster 2333. Don't ask me why, but this monitor only has a dvi-d connection (yes, i have searched it). So I have the monitor plugged into the laptop. If I use any of the Nvidia propriety drivers and try to set the resolution up to 1920x1080 (the monitor's native resolution), I get a massive overscan issue. Over the years I have tried to get this to work, tinkering with my xorg.conf to death. I have also tried this on every Ubuntu since 10.04, on all the corresponding LUbuntus, and on all the Linux Mints since Lisa. Exact same issue. I have even tried it in WinDoze and it works perfectly there (although I did get the error once, but was unable to reproduce it). Using the Open Source drivers it works perfectly iff I switch off the laptop monitor (this makes no difference with the Nvidia drivers). I would have happily gone on using the Open Source drivers, except that since upgrading to LUbuntu 12.10, the Open Source drivers make my monitor completely hazy and have the same overscan issue until I (through the haze, only because I know where things are) go to the monitor settings, activate the laptop's monitor, then deactivate it, and suddenly it comes right. I have to do this every time. So I have to find a way to fix one of them, so I may as well tackle the propriety drivers, hence this overlong question. Amidst other things, I have tried the nvidia-settings, but because it is connected to an 18pin, it detects the monitor as a vga monitor and does not give me overscan correction options. I have tried custom modlines (although there are always more of those try), I have tried using xrandr, and I have tried all the FlatPanelOptions. What I have not tried is a Gentoo build, as I don't have time any more to do that installation, but up to about three years ago when I ran Gentoo exclusively I did not have this issue. Below is an link to an image with a red highlight around the portion of the screen visible to me, the numbers around it are the number of pixels which are cut off. This does seem to drift a few pixels every now and then. Thanks in advance. Nvidia driver issue image

  Read the article

• External monitor is blank if I boot with the monitor plugged in

  - by Ronald

  Ubuntu 12.04 has problem with Intel GM45 Chipset, featuring the the Mobile Intel® Graphics Media Accelerator (GMA) 4500MHD I have a COMPAQ Presario CQ70 laptop with an Intel GM45 chipset that features the Mobile Intel® Graphics Media Accelerator (GMA) 4500MHD. I was using the second HDMI video port to drive both a projector or a second monitor. Everything was working fine under Ubuntu 8.04, 9.04, 10.04 and 11.04, however, when I upgraded to 12.04 the second monitor stopped working. What I mean when I say stopped working is: boot with monitor plugged in. Blank screen! Power off, unplug monitor and power on everything works. Plug in monitor (only mode that works in Mirror mode) two monitors that look same. Close laptop lid. screen goes blank only option for useful system is power off and unplug monitor. If I attempt to Adjust the monitor to maximum resolution that the monitor will handle and turn off mirror mode nothing can be moved onto that screen. This all worked fine with earlier versions of Ubuntu, is there a notes about the changes to the graphics management system in 12.04, like there is for the resolver change?

  Read the article

• Moving a window from a disconnected monitor to connected monitor on Vista

  - by RickMeasham

  I have a laptop that runs Vista Mega Ultimate Amazing for Business 64-bit. When at work, I connect a monitor via USB (which totally rocks) to the "left" of the laptop monitor. It's identified as monitor 3. At home, I use an old CRT monitor that sits to the right of the laptop monitor. It's monitor 2. Monitor 1 is, of course, the inbuilt laptop monitor. Now at home I open a window, any window, on monitor 2. Then I come to work and plug in monitor 3. Anything I had open on monitor 2 is now stuck in unretrievable land. (Actually, it's probably anything that was minimised when I left home that belonged on monitor 2 will expand back onto monitor 2, even though it's disconnected) How can I get those windows back onto connected monitors?

  Read the article

• Internal drives vs USB-3 with external SSD or eSata with External SSD

  - by normstorm

  I have a need to carry VMWare Virtual Machines with me for work. These are very large files (each VM is 20GB or more) and I carry around about 40 to 50 VM's to simulate different software configurations for different client needs. Key: they won't fit on the internal hard drive of my current laptop. I currently execute the VM's from an external 7200RPM 2.5" USB-2 drive. I keep copies of the VM's on other 5400 external USB-2 drives. The VM's work from this drive, but they are slow, costing me much time and frustration. It can take upwards of 30 minutes just to make a copy of one of the VM's. They can take upwards of 10-15 minutes to fully launch and then they operate sluggishly. I am buying a new laptop (Core I7, 8GB RAM and other high-end specs). I intend to buy an SSD for the O/S volume (C:). This SSD will not be large enough to hold the VM's. I have always wanted a second internal hard drive to operate the VM's. To have two hard drives, though, I am finding that I will have to go to a 17" laptop which would be bulky/heavy. I am instead considering purchasing a 15" laptop with either an eSATA port or USB-3 ports and then purchasing two external drives. One of the drives might be an external SSD (maybe OCX brand) for operating the VM's and the other a 7400RPM 1TB hard drive for carrying around the VM's not currently in use. The question is which options would give me the biggest bang for the buck and the weight: 1) 2nd Internal SSD hard drive. This would mean buying a 17" laptop with two drive "bays". The first bay would hold an SSD drive for the C: drive. I would leave the first bay empty from the manufacture and then purchase/install an aftermarket SSD drive. This second SSD drive would have to be very large (256 GB), which would be expensive. I would still also need another external hard drive for carrying around the VM's not in use. 2) 2nd internal hard drive - 7400 RPM. Again, a 17" laptop would be required, but there are models available with on SSD drive for the C: drive and a second 7200 RPM hard drives. The second drive could probably be large enough to hold the VM's in use as well as those not in use. But would it be fast enough to drive the VM's? 3) USB-3 with External SSD. I could buy a 15" laptop with an SSD drive for the C: drive and a second hard drive for general files. I would operate the VM's from an external USB-3 SSD drive and have a third USB-3 external 7200 RPM drive for holding the VM's not in use. 4) eSATA with External SSD. Ditto, just eSATA instead of USB-3 5) USB-3 with External 7400 RPM drive. Ditto, but the drive running the VM's would be USB-3 attached 7400 RPM drives rather than SSD. 6) eSATA with External 7400 RPM drive. Dittor, but the drive running the VM's would be eSATA attached 7400 RPM drives rather than SSD. Any thoughts on this and any creative solutions?

  Read the article

• Dual Monitor (Monitor and TV)

  - by umpirsky

  I connected TV to my computer, and trying to set dual display. Whatever resolution I choose for my second display (TV) I get message like this: The selected configuration for displays could not be applied required virtual size does not fit available size: requested=(2704, 1050), minimum=(320, 200), maximum=(1680, 1680) How can I fix this? Also, while I was experimenting system went to deadlock, I restarted and after boot monitor just turns off once system is up. I boot in recovery mode and after several retries fixed it somehow, I don't know how, probably by changing display config from display manager. now I found xorg.conf.new file in my home dir: Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" Screen 2 "Screen2" RightOf "Screen1" InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" FontPath "/usr/share/fonts/X11/misc" FontPath "/usr/share/fonts/X11/cyrillic" FontPath "/usr/share/fonts/X11/100dpi/:unscaled" FontPath "/usr/share/fonts/X11/75dpi/:unscaled" FontPath "/usr/share/fonts/X11/Type1" FontPath "/usr/share/fonts/X11/100dpi" FontPath "/usr/share/fonts/X11/75dpi" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" FontPath "built-ins" EndSection Section "Module" Load "extmod" Load "dbe" Load "glx" Load "dri" Load "dri2" Load "record" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor2" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "NoAccel" # [<bool>] #Option "SWcursor" # [<bool>] #Option "Dac6Bit" # [<bool>] #Option "Dac8Bit" # [<bool>] #Option "BusType" # [<str>] #Option "CPPIOMode" # [<bool>] #Option "CPusecTimeout" # <i> #Option "AGPMode" # <i> #Option "AGPFastWrite" # [<bool>] #Option "AGPSize" # <i> #Option "GARTSize" # <i> #Option "RingSize" # <i> #Option "BufferSize" # <i> #Option "EnableDepthMoves" # [<bool>] #Option "EnablePageFlip" # [<bool>] #Option "NoBackBuffer" # [<bool>] #Option "DMAForXv" # [<bool>] #Option "FBTexPercent" # <i> #Option "DepthBits" # <i> #Option "PCIAPERSize" # <i> #Option "AccelDFS" # [<bool>] #Option "IgnoreEDID" # [<bool>] #Option "CustomEDID" # [<str>] #Option "DisplayPriority" # [<str>] #Option "PanelSize" # [<str>] #Option "ForceMinDotClock" # <freq> #Option "ColorTiling" # [<bool>] #Option "VideoKey" # <i> #Option "RageTheatreCrystal" # <i> #Option "RageTheatreTunerPort" # <i> #Option "RageTheatreCompositePort" # <i> #Option "RageTheatreSVideoPort" # <i> #Option "TunerType" # <i> #Option "RageTheatreMicrocPath" # <str> #Option "RageTheatreMicrocType" # <str> #Option "ScalerWidth" # <i> #Option "RenderAccel" # [<bool>] #Option "SubPixelOrder" # [<str>] #Option "ClockGating" # [<bool>] #Option "VGAAccess" # [<bool>] #Option "ReverseDDC" # [<bool>] #Option "LVDSProbePLL" # [<bool>] #Option "AccelMethod" # <str> #Option "DRI" # [<bool>] #Option "ConnectorTable" # <str> #Option "DefaultConnectorTable" # [<bool>] #Option "DefaultTMDSPLL" # [<bool>] #Option "TVDACLoadDetect" # [<bool>] #Option "ForceTVOut" # [<bool>] #Option "TVStandard" # <str> #Option "IgnoreLidStatus" # [<bool>] #Option "DefaultTVDACAdj" # [<bool>] #Option "Int10" # [<bool>] #Option "EXAVSync" # [<bool>] #Option "ATOMTVOut" # [<bool>] #Option "R4xxATOM" # [<bool>] #Option "ForceLowPowerMode" # [<bool>] #Option "DynamicPM" # [<bool>] #Option "NewPLL" # [<bool>] #Option "ZaphodHeads" # <str> Identifier "Card0" Driver "radeon" BusID "PCI:2:0:0" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "ShadowFB" # [<bool>] #Option "Rotate" # <str> #Option "fbdev" # <str> #Option "debug" # [<bool>] Identifier "Card1" Driver "fbdev" BusID "PCI:2:0:0" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "ShadowFB" # [<bool>] #Option "DefaultRefresh" # [<bool>] #Option "ModeSetClearScreen" # [<bool>] Identifier "Card2" Driver "vesa" BusID "PCI:2:0:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" SubSection "Display" Viewport 0 0 Depth 1 EndSubSection SubSection "Display" Viewport 0 0 Depth 4 EndSubSection SubSection "Display" Viewport 0 0 Depth 8 EndSubSection SubSection "Display" Viewport 0 0 Depth 15 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 EndSubSection SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Card1" Monitor "Monitor1" SubSection "Display" Viewport 0 0 Depth 1 EndSubSection SubSection "Display" Viewport 0 0 Depth 4 EndSubSection SubSection "Display" Viewport 0 0 Depth 8 EndSubSection SubSection "Display" Viewport 0 0 Depth 15 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 EndSubSection SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Card2" Monitor "Monitor2" SubSection "Display" Viewport 0 0 Depth 1 EndSubSection SubSection "Display" Viewport 0 0 Depth 4 EndSubSection SubSection "Display" Viewport 0 0 Depth 8 EndSubSection SubSection "Display" Viewport 0 0 Depth 15 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 EndSubSection SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Can I delete it? Second display (TV) only works when I check Mirror displays option.

  Read the article

• Monitor Flickering Issue[Not Monitor's problem]

  - by cdb

  My monitor had a flickering issue.I couldnt rectify it through refresh rate changing.So i purchased a new LCD monitor.Still the issue persist.What is the issue.Is it the problem of motherboard.How can i solve it.

  Read the article

• How can I set external monitor as default?

  - by iJeeves

  I have connected an external monitor to my laptop through HDMI. Currently either my Desktop is getting extended to the external monitor (with native resolution) or low resolution on both when I choose "Same Image in both". How can I ensure that the external monitor is used by default and the laptop monitor just blanks. I generated the xorg.conf file by doing: X -configure The following is the content of xorg.conf.new file generated in my user folder. Should I copy this anywhere? Should I edit the contents? Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" FontPath "/usr/share/fonts/X11/misc" FontPath "/usr/share/fonts/X11/cyrillic" FontPath "/usr/share/fonts/X11/100dpi/:unscaled" FontPath "/usr/share/fonts/X11/75dpi/:unscaled" FontPath "/usr/share/fonts/X11/Type1" FontPath "/usr/share/fonts/X11/100dpi" FontPath "/usr/share/fonts/X11/75dpi" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" FontPath "built-ins" EndSection Section "Module" Load "glx" Load "dri2" Load "record" Load "extmod" Load "dbe" Load "dri" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Device" ### Available Driver options are:- ### Values: : integer, : float, : "True"/"False", ### : "String", : " Hz/kHz/MHz", ### : "%" ### [arg]: arg optional #Option "NoAccel" # [] #Option "SWcursor" # [] #Option "ColorKey" # #Option "CacheLines" # #Option "Dac6Bit" # [] #Option "DRI" # [] #Option "NoDDC" # [] #Option "ShowCache" # [] #Option "XvMCSurfaces" # #Option "PageFlip" # [] Identifier "Card0" Driver "intel" BusID "PCI:0:2:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" SubSection "Display" Viewport 0 0 Depth 1 EndSubSection SubSection "Display" Viewport 0 0 Depth 4 EndSubSection SubSection "Display" Viewport 0 0 Depth 8 EndSubSection SubSection "Display" Viewport 0 0 Depth 15 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 EndSubSection SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

  Read the article

• Monitor your Hard Drive’s Health with Acronis Drive Monitor

  - by Matthew Guay

  Are you worried that your computer’s hard drive could die without any warning?  Here’s how you can keep tabs on it and get the first warning signs of potential problems before you actually lose your critical data. Hard drive failures are one of the most common ways people lose important data from their computers.  As more of our memories and important documents are stored digitally, a hard drive failure can mean the loss of years of work.  Acronis Drive Monitor helps you avert these disasters by warning you at the first signs your hard drive may be having trouble.  It monitors many indicators, including heat, read/write errors, total lifespan, and more. It then notifies you via a taskbar popup or email that problems have been detected.  This early warning lets you know ahead of time that you may need to purchase a new hard drive and migrate your data before it’s too late. Getting Started Head over to the Acronis site to download Drive Monitor (link below).  You’ll need to enter your name and email, and then you can download this free tool. Also, note that the download page may ask if you want to include a trial of their for-pay backup program.  If you wish to simply install the Drive Monitor utility, click Continue without adding. Run the installer when the download is finished.  Follow the prompts and install as normal. Once it’s installed, you can quickly get an overview of your hard drives’ health.  Note that it shows 3 categories: Disk problems, Acronis backup, and Critical Events.  On our computer, we had Seagate DiskWizard, an image backup utility based on Acronis Backup, installed, and Acronis detected it. Drive Monitor stays running in your tray even when the application window is closed.  It will keep monitoring your hard drives, and will alert you if there’s a problem. Find Detailed Information About Your Hard Drives Acronis’ simple interface lets you quickly see an overview of how the drives on your computer are performing.  If you’d like more information, click the link under the description.  Here we see that one of our drives have overheated, so click Show disks to get more information. Now you can select each of your drives and see more information about them.  From the Disk overview tab that opens by default, we see that our drive is being monitored, has been running for a total of 368 days, and that it’s health is good.  However, it is running at 113F, which is over the recommended max of 107F.   The S.M.A.R.T. parameters tab gives us more detailed information about our drive.  Most users wouldn’t know what an accepted value would be, so it also shows the status.  If the value is within the accepted parameters, it will report OK; otherwise, it will show that has a problem in this area. One very interesting piece of information we can see is the total number of Power-On Hours, Start/Stop Count, and Power Cycle Count.  These could be useful indicators to check if you’re considering purchasing a second hand computer.  Simply load this program, and you’ll get a better view of how long it’s been in use. Finally, the Events tab shows each time the program gave a warning.  We can see that our drive, which had been acting flaky already, is routinely overheating even when our other hard drive was running in normal temperature ranges. Monitor Acronis Backups And Critical Errors In addition to monitoring critical stats of your hard drives, Acronis Drive Monitor also keeps up with the status of your backup software and critical events reported by Windows.  You can access these from the front page, or via the links on the left hand sidebar.  If you have any edition of any Acronis Backup product installed, it will show that it was detected.  Note that it can only monitor the backup status of the newest versions of Acronis Backup and True Image. If no Acronis backup software was installed, it will show a warning that the drive may be unprotected and will give you a link to download Acronis backup software.   If you have another backup utility installed that you wish to monitor yourself, click Configure backup monitoring, and then disable monitoring on the drives you’re monitoring yourself. Finally, you can view any detected Critical events from the Critical events tab on the left. Get Emailed When There’s a Problem One of Drive Monitor’s best features is the ability to send you an email whenever there’s a problem.  Since this program can run on any version of Windows, including the Server and Home Server editions, you can use this feature to stay on top of your hard drives’ health even when you’re not nearby.  To set this up, click Options in the top left corner. Select Alerts on the left, and then click the Change settings link to setup your email account. Enter the email address which you wish to receive alerts, and a name for the program.  Then, enter the outgoing mail server settings for your email.  If you have a Gmail account, enter the following information: Outgoing mail server (SMTP): smtp.gmail.com Port: 587 Username and Password: Your gmail address and password Check the Use encryption box, and then select TLS from the encryption options.   It will now send a test message to your email account, so check and make sure it sent ok. Now you can choose to have the program automatically email you when warnings and critical alerts appear, and also to have it send regular disk status reports.   Conclusion Whether you’ve got a brand new hard drive or one that’s seen better days, knowing the real health of your it is one of the best ways to be prepared before disaster strikes.  It’s no substitute for regular backups, but can help you avert problems.  Acronis Drive Monitor is a nice tool for this, and although we wish it wasn’t so centered around their backup offerings, we still found it a nice tool. Link Download Acronis Drive Monitor (registration required) Similar Articles Productive Geek Tips Quick Tip: Change Monitor Timeout From Command LineAnalyze and Manage Hard Drive Space with WinDirStatMonitor CPU, Memory, and Disk IO In Windows 7 with Taskbar MetersDefrag Multiple Hard Drives At Once In WindowsFind Your Missing USB Drive on Windows XP TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Windows 7’s WordPad is Actually Good Greate Image Viewing and Management with Zoner Photo Studio Free Windows Media Player Plus! – Cool WMP Enhancer Get Your Team’s World Cup Schedule In Google Calendar Backup Drivers With Driver Magician TubeSort: YouTube Playlist Organizer

  Read the article

• 12.04 - Connecting Acer X203H monitor to new Dell XPS 15z laptop

  - by Lucy Dixon

  I have installed the latest version of Ubuntu (12.04) on my boyfriend's new Dell XPS 15z laptop. He uses a Microsoft wireless keyboard and mouse, and an Acer X203H monitor with his set-up. No problems with the keyboard or mouse, or with connecting the HP printer, but we just can't get the laptop to talk to the Acer monitor. With his old setup he used a VGA cable to connect machine & monitor. New laptop has no VGA port, but we've bought a VGA to HDMI adaptor to connect to the laptop. Have tried using Fn F2 to change the display from laptop to monitor, but it doesn't see the monitor at all. HELP! Is there a driver I can install from somewhere? Or how can I tell Ubuntu to look for the monitor on another port? Completely in the dark, and about to get in trouble!! Thanks

  Read the article

• Turn off laptop display and have monitor

  - by Ryan B

  My laptop display has stopped working and is unfixable! Anyway, I got a full HD monitor and plugged that into the HDMI port of the laptop. I have changed the power settings so that I can close the lid and still have the monitor on, and this all works. However because it is on "mirror displays", I cannot get the full 1080p resolution that the monitor supports, and when I turn off mirror displays and switch off the laptop screen, the monitor will also switch off! I'm really stuck, as I can only get the monitor to display its full resolution if I have it with the laptop screen turned on, and I dont want this because (as the laptop display does not work) things get lost on that side of the screen. HELP. (Dell Studio 1537 Monitor is Samsung SA300 Connected through HDMI Ubuntu 11.10)

  Read the article

• Modern monitor technologies - need to find a new monitor

  - by Michal Minicki

  I'm preparing to change my old LCD monitor for a new one. I have an old NEC 20WGX2 Pro based on an IPS panel. I'm looking for a screen that gives good color output but is very good at gaming at the same time (since it is its primary service). I tend to switch monitors between my different computers at home so it has to be multi purpose, hence IPS technology before. Now, where can I read on newest monitor technologies so I can make an informed decision? I need to find a best fit for myself and I have a very outdated knowledge at the moment. So any hints are greatly appreciated, be it info on technologies, web sources, links to other questions, etc.

  Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >