Search Results

Search found 90 results on 4 pages for 'fnord ix'.

Page 1/4 | 1 2 3 4  | Next Page >

• How to set up dual quadro cards on RHEL 5.5?

  - by Alex J. Roberts

  I have a RHEL 5 workstation with 2 nvidia Quadro FX4500 cards, with one display attached to each card. After doing a clean install of RHEL 5.5, the second display doesnt work (it worked ok in RHEL 5.2). Neither separate X screens nor Xinerama are working. The kernel version is 2.6.18-194.el5 I've tried nvidia drivers 185.18.36 (the ones that i was using on 5.2) and the latest 260.19.36 and neither works. My xorg.conf is as follows: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 1.0 (buildmeister@builder58) Fri Aug 14 18:34:43 PDT 2009 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Files" FontPath "unix/:7100" EndSection Section "ServerFlags" Option "Xinerama" "1" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from data in "/etc/sysconfig/keyboard" Identifier "Keyboard0" Driver "kbd" Option "XkbLayout" "us" Option "XkbModel" "pc105" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL 3007WFP" HorizSync 49.3 - 98.5 VertRefresh 60.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor1" VendorName "Unknown" ModelName "DELL 3007WFP" HorizSync 49.3 - 98.5 VertRefresh 60.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro FX 4500" BusID "PCI:10:0:0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro FX 4500" BusID "PCI:129:0:0" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection And the Xorg Log: X Window System Version 7.1.1 Release Date: 12 May 2006 X Protocol Version 11, Revision 0, Release 7.1.1 Build Operating System: Linux 2.6.18-164.11.1.el5 x86_64 Red Hat, Inc. Current Operating System: Linux blur.svsdsde 2.6.18-194.el5 #1 SMP Tue Mar 16 21:52:39 EDT 2010 x86_64 Build Date: 06 March 2010 Build ID: xorg-x11-server 1.1.1-48.76.el5 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 18 09:52:08 2011 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "Layout0" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Device0" (**) |-->Screen "Screen1" (1) (**) | |-->Monitor "Monitor1" (**) | |-->Device "Device1" (**) |-->Input Device "Keyboard0" (**) |-->Input Device "Mouse0" (**) FontPath set to: unix/:7100 (==) RgbPath set to "/usr/share/X11/rgb" (==) ModulePath set to "/usr/lib64/xorg/modules" (**) Option "Xinerama" "1" (**) Xinerama: enabled (==) Max clients allowed: 512, resource mask: 0xfffff (II) Open ACPI successful (/var/run/acpid.socket) (II) Module ABI versions: X.Org ANSI C Emulation: 0.3 X.Org Video Driver: 1.0 X.Org XInput driver : 0.6 X.Org Server Extension : 0.3 X.Org Font Renderer : 0.5 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/lib64/xorg/modules/fonts/libbitmap.so (II) Module bitmap: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/lib64/xorg/modules/libpcidata.so (II) Module pcidata: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org Video Driver, version 1.0 (++) using VT number 7 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 10de,005e card 103c,1500 rev a3 class 05,80,00 hdr 00 (II) PCI: 00:01:0: chip 10de,0051 card 103c,1500 rev a3 class 06,01,00 hdr 80 (II) PCI: 00:01:1: chip 10de,0052 card 103c,1500 rev a2 class 0c,05,00 hdr 80 (II) PCI: 00:02:0: chip 10de,005a card 103c,1500 rev a2 class 0c,03,10 hdr 80 (II) PCI: 00:02:1: chip 10de,005b card 103c,1500 rev a3 class 0c,03,20 hdr 80 (II) PCI: 00:04:0: chip 10de,0059 card 103c,1500 rev a2 class 04,01,00 hdr 00 (II) PCI: 00:06:0: chip 10de,0053 card 103c,1500 rev f2 class 01,01,8a hdr 00 (II) PCI: 00:07:0: chip 10de,0054 card 103c,1500 rev f3 class 01,01,85 hdr 00 (II) PCI: 00:08:0: chip 10de,0055 card 103c,1500 rev f3 class 01,01,85 hdr 00 (II) PCI: 00:09:0: chip 10de,005c card 0000,0000 rev a2 class 06,04,01 hdr 01 (II) PCI: 00:0a:0: chip 10de,0057 card 103c,1500 rev a3 class 06,80,00 hdr 00 (II) PCI: 00:0e:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01 (II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:19:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:19:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:19:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:19:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 05:05:0: chip 104c,8023 card 103c,1500 rev 00 class 0c,00,10 hdr 00 (II) PCI: 0a:00:0: chip 10de,009d card 10de,02af rev a1 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (II) Subtractive PCI-to-PCI bridge: (II) Bus 5: bridge is at (0:9:0), (0,5,5), BCTRL: 0x0206 (VGA_EN is cleared) (II) Bus 5 non-prefetchable memory range: [0] -1 0 0xf5000000 - 0xf50fffff (0x100000) MX[B] (II) PCI-to-PCI bridge: (II) Bus 10: bridge is at (0:14:0), (0,10,10), BCTRL: 0x000a (VGA_EN is set) (II) Bus 10 I/O range: [0] -1 0 0x00003000 - 0x00003fff (0x1000) IX[B] (II) Bus 10 non-prefetchable memory range: [0] -1 0 0xf3000000 - 0xf4ffffff (0x2000000) MX[B] (II) Bus 10 prefetchable memory range: [0] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B] (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:24:0), (0,0,10), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B] (--) PCI:*(10:0:0) nVidia Corporation Quadro FX 4500 rev 161, Mem @ 0xf3000000/24, 0xc0000000/28, 0xf4000000/24, I/O @ 0x3000/7 (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) Active PCI resource ranges: [0] -1 0 0xf5000000 - 0xf5003fff (0x4000) MX[B] [1] -1 0 0xf5004000 - 0xf50047ff (0x800) MX[B] [...snipped... post too long] [28] -1 0 0x0000fb00 - 0x0000fbff (0x100) IX[B] [29] -1 0 0x00003000 - 0x0000307f (0x80) IX[B](B) (II) Active PCI resource ranges after removing overlaps: [0] -1 0 0xf5000000 - 0xf5003fff (0x4000) MX[B] [1] -1 0 0xf5004000 - 0xf50047ff (0x800) MX[B] [...snipped... post too long] [28] -1 0 0x0000fb00 - 0x0000fbff (0x100) IX[B] [29] -1 0 0x00003000 - 0x0000307f (0x80) IX[B](B) (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xf5000000 - 0xf5003fff (0x4000) MX[B] [5] -1 0 0xf5004000 - 0xf50047ff (0x800) MX[B] [6] -1 0 0xf5104000 - 0xf5104fff (0x1000) MX[B] [7] -1 0 0xf5103000 - 0xf5103fff (0x1000) MX[B] [8] -1 0 0xf5102000 - 0xf5102fff (0x1000) MX[B] [9] -1 0 0xf5101000 - 0xf5101fff (0x1000) MX[B] [10] -1 0 0xfebf0000 - 0xfebf00ff (0x100) MX[B] [11] -1 0 0xf5100000 - 0xf5100fff (0x1000) MX[B] [12] -1 0 0xf4000000 - 0xf4ffffff (0x1000000) MX[B](B) [13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B) [14] -1 0 0xf3000000 - 0xf3ffffff (0x1000000) MX[B](B) [15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [17] -1 0 0x000048f0 - 0x000048f7 (0x8) IX[B] [18] -1 0 0x000048c0 - 0x000048cf (0x10) IX[B] [19] -1 0 0x00004c04 - 0x00004c07 (0x4) IX[B] [20] -1 0 0x000048e8 - 0x000048ef (0x8) IX[B] [21] -1 0 0x00004c00 - 0x00004c03 (0x4) IX[B] [22] -1 0 0x000048e0 - 0x000048e7 (0x8) IX[B] [23] -1 0 0x000048b0 - 0x000048bf (0x10) IX[B] [24] -1 0 0x000048fc - 0x000048ff (0x4) IX[B] [25] -1 0 0x000048d8 - 0x000048df (0x8) IX[B] [26] -1 0 0x000048f8 - 0x000048fb (0x4) IX[B] [27] -1 0 0x000048d0 - 0x000048d7 (0x8) IX[B] [28] -1 0 0x000048a0 - 0x000048af (0x10) IX[B] [29] -1 0 0x00004400 - 0x000044ff (0x100) IX[B] [30] -1 0 0x00004000 - 0x000040ff (0x100) IX[B] [31] -1 0 0x00004840 - 0x0000487f (0x40) IX[B] [32] -1 0 0x00004800 - 0x0000483f (0x40) IX[B] [33] -1 0 0x00004880 - 0x0000489f (0x20) IX[B] [34] -1 0 0x0000fb00 - 0x0000fbff (0x100) IX[B] [35] -1 0 0x00003000 - 0x0000307f (0x80) IX[B](B) (II) LoadModule: "extmod" (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so (II) Module glx: vendor="NVIDIA Corporation" compiled for 4.0.2, module version = 1.0.0 Module class: X.Org Server Extension (II) NVIDIA GLX Module 185.18.36 Fri Aug 14 18:27:24 PDT 2009 (II) Loading extension GLX (II) LoadModule: "freetype" (II) Loading /usr/lib64/xorg/modules/fonts/libfreetype.so (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" compiled for 7.1.1, module version = 2.1.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font FreeType (II) LoadModule: "type1" (II) Loading /usr/lib64/xorg/modules/fonts/libtype1.so (II) Module type1: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.2 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font Type1 (II) LoadModule: "record" (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.3 (II) Loading sub module "drm" (II) LoadModule: "drm" (II) Loading /usr/lib64/xorg/modules/linux/libdrm.so (II) Module drm: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.3 (II) Loading extension XFree86-DRI (II) LoadModule: "nvidia" (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so (II) Module nvidia: vendor="NVIDIA Corporation" compiled for 4.0.2, module version = 1.0.0 Module class: X.Org Video Driver (II) LoadModule: "kbd" (II) Loading /usr/lib64/xorg/modules/input/kbd_drv.so (II) Module kbd: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.1.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.6 (II) LoadModule: "mouse" (II) Loading /usr/lib64/xorg/modules/input/mouse_drv.so (II) Module mouse: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.1.1 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.6 (II) NVIDIA dlloader X Driver 185.18.36 Fri Aug 14 17:51:02 PDT 2009 (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs (II) Primary Device is: PCI 0a:00:0 (--) Chipset NVIDIA GPU found (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib64/xorg/modules/libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.3 (II) Loading sub module "wfb" (II) LoadModule: "wfb" (II) Loading /usr/lib64/xorg/modules/libwfb.so (II) Module wfb: vendor="NVIDIA Corporation" compiled for 7.1.99.2, module version = 1.0.0 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Loading /usr/lib64/xorg/modules/libramdac.so (II) Module ramdac: vendor="X.Org Foundation" compiled for 7.1.1, module version = 0.1.0 ABI class: X.Org Video Driver, version 1.0 (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xf5000000 - 0xf5003fff (0x4000) MX[B] [5] -1 0 0xf5004000 - 0xf50047ff (0x800) MX[B] [6] -1 0 0xf5104000 - 0xf5104fff (0x1000) MX[B] [7] -1 0 0xf5103000 - 0xf5103fff (0x1000) MX[B] [8] -1 0 0xf5102000 - 0xf5102fff (0x1000) MX[B] [9] -1 0 0xf5101000 - 0xf5101fff (0x1000) MX[B] [10] -1 0 0xfebf0000 - 0xfebf00ff (0x100) MX[B] [11] -1 0 0xf5100000 - 0xf5100fff (0x1000) MX[B] [12] -1 0 0xf4000000 - 0xf4ffffff (0x1000000) MX[B](B) [13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B) [14] -1 0 0xf3000000 - 0xf3ffffff (0x1000000) MX[B](B) [15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [17] -1 0 0x000048f0 - 0x000048f7 (0x8) IX[B] [18] -1 0 0x000048c0 - 0x000048cf (0x10) IX[B] [19] -1 0 0x00004c04 - 0x00004c07 (0x4) IX[B] [20] -1 0 0x000048e8 - 0x000048ef (0x8) IX[B] [21] -1 0 0x00004c00 - 0x00004c03 (0x4) IX[B] [22] -1 0 0x000048e0 - 0x000048e7 (0x8) IX[B] [23] -1 0 0x000048b0 - 0x000048bf (0x10) IX[B] [24] -1 0 0x000048fc - 0x000048ff (0x4) IX[B] [25] -1 0 0x000048d8 - 0x000048df (0x8) IX[B] [26] -1 0 0x000048f8 - 0x000048fb (0x4) IX[B] [27] -1 0 0x000048d0 - 0x000048d7 (0x8) IX[B] [28] -1 0 0x000048a0 - 0x000048af (0x10) IX[B] [29] -1 0 0x00004400 - 0x000044ff (0x100) IX[B] [30] -1 0 0x00004000 - 0x000040ff (0x100) IX[B] [31] -1 0 0x00004840 - 0x0000487f (0x40) IX[B] [32] -1 0 0x00004800 - 0x0000483f (0x40) IX[B] [33] -1 0 0x00004880 - 0x0000489f (0x20) IX[B] [34] -1 0 0x0000fb00 - 0x0000fbff (0x100) IX[B] [35] -1 0 0x00003000 - 0x0000307f (0x80) IX[B](B) (II) resource ranges after probing: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xf5000000 - 0xf5003fff (0x4000) MX[B] [5] -1 0 0xf5004000 - 0xf50047ff (0x800) MX[B] [6] -1 0 0xf5104000 - 0xf5104fff (0x1000) MX[B] [7] -1 0 0xf5103000 - 0xf5103fff (0x1000) MX[B] [8] -1 0 0xf5102000 - 0xf5102fff (0x1000) MX[B] [9] -1 0 0xf5101000 - 0xf5101fff (0x1000) MX[B] [10] -1 0 0xfebf0000 - 0xfebf00ff (0x100) MX[B] [11] -1 0 0xf5100000 - 0xf5100fff (0x1000) MX[B] [12] -1 0 0xf4000000 - 0xf4ffffff (0x1000000) MX[B](B) [13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B) [14] -1 0 0xf3000000 - 0xf3ffffff (0x1000000) MX[B](B) [15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [20] -1 0 0x000048f0 - 0x000048f7 (0x8) IX[B] [21] -1 0 0x000048c0 - 0x000048cf (0x10) IX[B] [22] -1 0 0x00004c04 - 0x00004c07 (0x4) IX[B] [23] -1 0 0x000048e8 - 0x000048ef (0x8) IX[B] [24] -1 0 0x00004c00 - 0x00004c03 (0x4) IX[B] [25] -1 0 0x000048e0 - 0x000048e7 (0x8) IX[B] [26] -1 0 0x000048b0 - 0x000048bf (0x10) IX[B] [27] -1 0 0x000048fc - 0x000048ff (0x4) IX[B] [28] -1 0 0x000048d8 - 0x000048df (0x8) IX[B] [29] -1 0 0x000048f8 - 0x000048fb (0x4) IX[B] [30] -1 0 0x000048d0 - 0x000048d7 (0x8) IX[B] [31] -1 0 0x000048a0 - 0x000048af (0x10) IX[B] [32] -1 0 0x00004400 - 0x000044ff (0x100) IX[B] [33] -1 0 0x00004000 - 0x000040ff (0x100) IX[B] [34] -1 0 0x00004840 - 0x0000487f (0x40) IX[B] [35] -1 0 0x00004800 - 0x0000483f (0x40) IX[B] [36] -1 0 0x00004880 - 0x0000489f (0x20) IX[B] [37] -1 0 0x0000fb00 - 0x0000fbff (0x100) IX[B] [38] -1 0 0x00003000 - 0x0000307f (0x80) IX[B](B) [39] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [40] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 (==) NVIDIA(0): RGB weight 888 (==) NVIDIA(0): Default visual is TrueColor (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) (**) NVIDIA(0): Option "TwinView" "0" (**) NVIDIA(0): Option "MetaModes" "nvidia-auto-select +0+0" (**) NVIDIA(0): Enabling RENDER acceleration (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is (II) NVIDIA(0): enabled. (II) NVIDIA(0): NVIDIA GPU Quadro FX 4500 (G70GL) at PCI:10:0:0 (GPU-0) (--) NVIDIA(0): Memory: 524288 kBytes (--) NVIDIA(0): VideoBIOS: 05.70.02.41.01 (II) NVIDIA(0): Detected PCI Express Link width: 16X (--) NVIDIA(0): Interlaced video modes are supported on this GPU (--) NVIDIA(0): Connected display device(s) on Quadro FX 4500 at PCI:10:0:0: (--) NVIDIA(0): DELL 3007WFP (DFP-0) (--) NVIDIA(0): DELL 3007WFP (DFP-0): 310.0 MHz maximum pixel clock (--) NVIDIA(0): DELL 3007WFP (DFP-0): Internal Dual Link TMDS (II) NVIDIA(0): Assigned Display Device: DFP-0 (II) NVIDIA(0): Validated modes: (II) NVIDIA(0): "nvidia-auto-select+0+0" (II) NVIDIA(0): Virtual screen size determined to be 2560 x 1600 (--) NVIDIA(0): DPI set to (101, 101); computed from "UseEdidDpi" X config (--) NVIDIA(0): option (WW) NVIDIA(0): UBB is incompatible with the Composite extension. Disabling (WW) NVIDIA(0): UBB. (==) NVIDIA(0): Disabling 32-bit ARGB GLX visuals. (--) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xf5000000 - 0xf5003fff (0x4000) MX[B] [5] -1 0 0xf5004000 - 0xf50047ff (0x800) MX[B] [6] -1 0 0xf5104000 - 0xf5104fff (0x1000) MX[B] [7] -1 0 0xf5103000 - 0xf5103fff (0x1000) MX[B] [8] -1 0 0xf5102000 - 0xf5102fff (0x1000) MX[B] [9] -1 0 0xf5101000 - 0xf5101fff (0x1000) MX[B] [10] -1 0 0xfebf0000 - 0xfebf00ff (0x100) MX[B] [11] -1 0 0xf5100000 - 0xf5100fff (0x1000) MX[B] [12] -1 0 0xf4000000 - 0xf4ffffff (0x1000000) MX[B](B) [13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B) [14] -1 0 0xf3000000 - 0xf3ffffff (0x1000000) MX[B](B) [15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [20] -1 0 0x000048f0 - 0x000048f7 (0x8) IX[B] [21] -1 0 0x000048c0 - 0x000048cf (0x10) IX[B] [22] -1 0 0x00004c04 - 0x00004c07 (0x4) IX[B] [23] -1 0 0x000048e8 - 0x000048ef (0x8) IX[B] [24] -1 0 0x00004c00 - 0x00004c03 (0x4) IX[B] [25] -1 0 0x000048e0 - 0x000048e7 (0x8) IX[B] [26] -1 0 0x000048b0 - 0x000048bf (0x10) IX[B] [27] -1 0 0x000048fc - 0x000048ff (0x4) IX[B] [28] -1 0 0x000048d8 - 0x000048df (0x8) IX[B] [29] -1 0 0x000048f8 - 0x000048fb (0x4) IX[B] [30] -1 0 0x000048d0 - 0x000048d7 (0x8) IX[B] [31] -1 0 0x000048a0 - 0x000048af (0x10) IX[B] [32] -1 0 0x00004400 - 0x000044ff (0x100) IX[B] [33] -1 0 0x00004000 - 0x000040ff (0x100) IX[B] [34] -1 0 0x00004840 - 0x0000487f (0x40) IX[B] [35] -1 0 0x00004800 - 0x0000483f (0x40) IX[B] [36] -1 0 0x00004880 - 0x0000489f (0x20) IX[B] [37] -1 0 0x0000fb00 - 0x0000fbff (0x100) IX[B] [38] -1 0 0x00003000 - 0x0000307f (0x80) IX[B](B) [39] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [40] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) NVIDIA(GPU-1): NVIDIA GPU Quadro FX 4500 (G70GL) at PCI:129:0:0 (GPU-1) (--) NVIDIA(GPU-1): Memory: 524288 kBytes (--) NVIDIA(GPU-1): VideoBIOS: 05.70.02.41.01 (II) NVIDIA(GPU-1): Detected PCI Express Link width: 16X (--) NVIDIA(GPU-1): Interlaced video modes are supported on this GPU (--) NVIDIA(GPU-1): Connected display device(s) on Quadro FX 4500 at PCI:129:0:0: (--) NVIDIA(GPU-1): DELL 3007WFP (DFP-0) (--) NVIDIA(GPU-1): DELL 3007WFP (DFP-0): 310.0 MHz maximum pixel clock (--) NVIDIA(GPU-1): DELL 3007WFP (DFP-0): Internal Dual Link TMDS (II) NVIDIA(0): Initialized GPU GART. (II) NVIDIA(0): Setting mode "nvidia-auto-select+0+0" (II) Loading extension NV-GLX (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized (==) NVIDIA(0): Disabling shared memory pixmaps (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture (==) NVIDIA(0): Backing store disabled (==) NVIDIA(0): Silken mouse enabled (**) Option "dpms" (**) NVIDIA(0): DPMS enabled (II) Loading extension NV-CONTROL (==) RandR enabled (II) Setting vga for screen 0. (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) Initializing built-in extension XEVIE (II) Initializing extension GLX (WW) Disabling Composite since Xinerama is enabled (**) Option "CoreKeyboard" (**) Keyboard0: Core Keyboard (**) Option "Protocol" "standard" (**) Keyboard0: Protocol: standard (**) Option "AutoRepeat" "500 30" (**) Option "XkbRules" "xorg" (**) Keyboard0: XkbRules: "xorg" (**) Option "XkbModel" "pc105" (**) Keyboard0: XkbModel: "pc105" (**) Option "XkbLayout" "us" (**) Keyboard0: XkbLayout: "us" (**) Option "CustomKeycodes" "off" (**) Keyboard0: CustomKeycodes disabled (**) Option "Protocol" "auto" (**) Mouse0: Device: "/dev/input/mice" (**) Mouse0: Protocol: "auto" (**) Option "CorePointer" (**) Mouse0: Core Pointer (**) Option "Device" "/dev/input/mice" (**) Option "Emulate3Buttons" "no" (**) Option "ZAxisMapping" "4 5" (**) Mouse0: ZAxisMapping: buttons 4 and 5 (**) Mouse0: Buttons: 9 (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE) (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD) (--) Mouse0: PnP-detected protocol: "ExplorerPS/2" (II) Mouse0: ps2EnableDataReporting: succeeded (II) Open ACPI successful (/var/run/acpid.socket) (II) NVIDIA(0): Setting mode "nvidia-auto-select+0+0" (II) Mouse0: ps2EnableDataReporting: succeeded (the snipped part can be changed if necessary) Any help at all would be appreciated. Cheers, Alex

  Read the article

• IX eCommerce Forum: Oracle ed Euronics presentano il loro caso di successo

  - by Claudia Caramelli-Oracle

  Promosso da Netcomm, l'evento ha raggiunto la nona edizione. La tematica principale permette di indagare le dinamiche di tutta la filiera del commercio elettronico, offrendo spunti utili grazie al coinvolgimento di ospiti illustri e relatori. L'e-Commerce Forum è il luogo ideale per scoprire le opportunità del mercato italiano.Oracle, insieme a Reply, ha organizzato un workshop lunch rivolto a tutti coloro che sono interessati a sentire storie di successo circa come la piattaforma eCommerce di Oracle è stata implementata con successo. Il testimonial in questa occasione è stato Euronics. Abbiamo avuto in sala quasi 40 persone che hanno trascorso la loro pausa pranzo con noi! La tematica del resto è attuale e in continua evoluzione/espansione: l'interesse è alto e Oracle offre i mezzi più all'avanguardia per costruire la propria storia di successo proiettando le altre realtà sempre più avanti nel commercio elettronico.Per maggiori informazioni scrivi a Silvia Valgoi

  Read the article

• Introduction to JQuery: Part IX

  In this article, we will cover few JQuery's AJAX functions.

  Read the article

• Why isn't my Ruby object deleted when the last reference goes out of scope?

  - by Andrew Clegg

  Hi gurus, I've found a weird effect when trying to track down a memory leak in a Rails app. Can anyone explain what's going on here? Save this script as a plain Ruby script (Rails not necessary): class Fnord def to_s 'fnord' end end def test f = Fnord.new end test GC.start sleep 2 ObjectSpace.each_object do |o| puts o if o.is_a? Fnord end When I run this via ruby 1.8.7 (2009-06-12 patchlevel 174) [i486-linux] I get the following: bash $ ruby var_test fnord Although the variable f is out of scope, there are no other references to the single Fnord object, and I've garbage collected, the object still seems to exist. Is this a nefarious memory leak of some sort, or am I completely missing something about Ruby? Further, if I change the test method to this: def test f = Fnord.new f = nil end I get no output. But surely this should not change the semantics here? Many thanks!

  Read the article

• Specifying Android project dependencies (in Eclipse)

  - by Henrik Gustafsson

  I have two Android projects, a 'library project' containing a custom layout, and an 'application project' containing an application which uses the layout. Everything seems to build and execute fine, except that the visual layout editor throws a ClassNotFoundException (which I assume is a bug in the plug-in), but when I try to start to make use of the attributes I defined for the custom layout in the xml, I can no longer build. That is; this works: <?xml version="1.0" encoding="utf-8"?> <se.fnord.android.layout.PredicateLayout xmlns:android="http://schemas.android.com/apk/res/android" android:layout_width="fill_parent" android:layout_height="fill_parent"> <TextView android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="asdfasdf" /> </se.fnord.android.layout.PredicateLayout> Whereas this does not: <?xml version="1.0" encoding="utf-8"?> <se.fnord.android.layout.PredicateLayout xmlns:android="http://schemas.android.com/apk/res/android" xmlns:fnord="http://schemas.android.com/apk/res/se.fnord.android" android:layout_width="fill_parent" android:layout_height="fill_parent"> <TextView fnord:layout_horizontalSpacing="1px" android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="asdfasdf" /> </se.fnord.android.layout.PredicateLayout> The build fails with a message from aapt: ERROR No resource identifier found for attribute 'layout_horizontalSpacing' in package 'se.fnord.android' The resource identifier does exist in the R-file and attrs.xml contained the library project, and if I put the layout code and resources directly in the application project everything works fine. The layout_horizontalSpacing attribute (and layout_verticalSpacing) is a custom attribute used in the PredicateLayout.LayoutParam class to specify the distance to the next widget. So far I've tried the standard eclipse ways by specifying project references and build path project dependencies. I was also told to try the tag in the application manifest, which did not help. So, what do I need to do for the references in the xml-file to work? I don't know if it's relevant, but the 'library' manifest looks like this: <?xml version="1.0" encoding="utf-8"?> <manifest xmlns:android="http://schemas.android.com/apk/res/android" package="se.fnord.android" android:versionCode="1" android:versionName="1.0.0"> </manifest> The 'application' manifest like this: <?xml version="1.0" encoding="utf-8"?> <manifest xmlns:android="http://schemas.android.com/apk/res/android" package="se.fnord.appname" android:versionCode="1" android:versionName="1.0.0"> <application android:icon="@drawable/icon" android:label="@string/app_name"> <activity android:name=".AppName" android:label="@string/app_name"> <intent-filter> <action android:name="android.intent.action.MAIN" /> <category android:name="android.intent.category.LAUNCHER" /> </intent-filter> </activity> </application> </manifest> (The 'PredicateLayout', btw, is a cleaned-up version of this).

  Read the article

• jQuery replacing an image inside a .net datalist

  - by user359409

  (submit said I was trying to post an image so I've changed image everywhere to ix I am trying to get jQuery to replace an ix inside a datalist. The original ix is the thumbnail ix of a product on a category page. The small ix I am clicking on are swatch ix for the different colors of a product. I can get it to work using a div tag around the ix tag inside the ItemTemplate. I don't need to use a div tag if I can get the imagesx to swap- I was just using it because that is sample code I found and it works for the first product in the category. <asp:HyperLink ID="ProductNav" runat="server" NavigateUrl='<%#Eval("NavigateUrl") %>'> <div id="ladiv" runat="server"> <asp:Ixx runat="server" ID="ProdThumb" /> </div> </asp:HyperLink> <asp:PlaceHolder ID="phSwatches" runat="server"></asp:PlaceHolder> The ProdThumb ix is added from the code behind and the swatches are added from the code behind swatches.Controls.Add(new LiteralControl("<table><tr>")); foreach(OptionChoice optionChoice in option.Choices) { string swatchThumbnail = string.Format("<ix ID=\"{0}\" src=\"{1}\" border=\"0\" class=\"{2}\" />","swatch" + optionChoice.OptionChoiceId.ToString(), ResolveUrl(optionChoice.ThumbnailUrl),"imgthumb"); swatches.Controls.Add(new LiteralControl("<td>")); swatches.Controls.Add(new LiteralControl(swatchThumbnail)); swatches.Controls.Add(new LiteralControl("</td>")); } swatches.Controls.Add(new LiteralControl("</tr></table>")); prodThumb.IxUrl = product.ThumbnailUrl; prodThumb.AlternateText = product.ThumbnailAltText; prodThumb.CssClass = "Thumbnail"; The jQuery is: $(function() { $("ix.imgthumb").click(function(e) { var t = $(this); var newImg = ''; $('#ladiv') .html($(newImg) ); }); }); </script> Both images are named similar, except the swatch contains "sws" and the larger one is the some only with "swl". I have spent several days searching but am not able to get it to work. If I try something like $("#<%=ladiv.ClientID %") the code can't find it. I appreciate any help.

  Read the article

• Which statically typed languages support intersection types for function return values?

  - by stakx

  Initial note: This question got closed after several edits because I lacked the proper terminology to state accurately what I was looking for. Sam Tobin-Hochstadt then posted a comment which made me recognise exactly what that was: programming languages that support intersection types for function return values. Now that the question has been re-opened, I've decided to improve it by rewriting it in a (hopefully) more precise manner. Therefore, some answers and comments below might no longer make sense because they refer to previous edits. (Please see the question's edit history in such cases.) Are there any popular statically & strongly typed programming languages (such as Haskell, generic Java, C#, F#, etc.) that support intersection types for function return values? If so, which, and how? (If I'm honest, I would really love to see someone demonstrate a way how to express intersection types in a mainstream language such as C# or Java.) I'll give a quick example of what intersection types might look like, using some pseudocode similar to C#: interface IX { … } interface IY { … } interface IB { … } class A : IX, IY { … } class B : IX, IY, IB { … } T fn() where T : IX, IY { return … ? new A() : new B(); } That is, the function fn returns an instance of some type T, of which the caller knows only that it implements interfaces IX and IY. (That is, unlike with generics, the caller doesn't get to choose the concrete type of T — the function does. From this I would suppose that T is in fact not a universal type, but an existential type.) P.S.: I'm aware that one could simply define a interface IXY : IX, IY and change the return type of fn to IXY. However, that is not really the same thing, because often you cannot bolt on an additional interface IXY to a previously defined type A which only implements IX and IY separately. Footnote: Some resources about intersection types: Wikipedia article for "Type system" has a subsection about intersection types. Report by Benjamin C. Pierce (1991), "Programming With Intersection Types, Union Types, and Polymorphism" David P. Cunningham (2005), "Intersection types in practice", which contains a case study about the Forsythe language, which is mentioned in the Wikipedia article. A Stack Overflow question, "Union types and intersection types" which got several good answers, among them this one which gives a pseudocode example of intersection types similar to mine above.

  Read the article

• Convertion of tiff image in Python script - OCR using tesseract

  - by PYTHON TEAM

  I want to convert a tiff image file to text document. My code perfectly as I expected to convert tiff images with usual font but its not working for french script font . My tiff image file contains text. The font of text is in french script format.I here is my code import Image import subprocess import util import errors tesseract_exe_name = 'tesseract' # Name of executable to be called at command line scratch_image_name = "temp.bmp" # This file must be .bmp or other Tesseract-compatible format scratch_text_name_root = "temp" # Leave out the .txt extension cleanup_scratch_flag = True # Temporary files cleaned up after OCR operation def call_tesseract(input_filename, output_filename): """Calls external tesseract.exe on input file (restrictions on types), outputting output_filename+'txt'""" args = [tesseract_exe_name, input_filename, output_filename] proc = subprocess.Popen(args) retcode = proc.wait() if retcode!=0: errors.check_for_errors() def image_to_string(im, cleanup = cleanup_scratch_flag): """Converts im to file, applies tesseract, and fetches resulting text. If cleanup=True, delete scratch files after operation.""" try: util.image_to_scratch(im, scratch_image_name) call_tesseract(scratch_image_name, scratch_text_name_root) text = util.retrieve_text(scratch_text_name_root) finally: if cleanup: util.perform_cleanup(scratch_image_name, scratch_text_name_root) return text def image_file_to_string(filename, cleanup = cleanup_scratch_flag, graceful_errors=True): If cleanup=True, delete scratch files after operation.""" try: try: call_tesseract(filename, scratch_text_name_root) text = util.retrieve_text(scratch_text_name_root) except errors.Tesser_General_Exception: if graceful_errors: im = Image.open(filename) text = image_to_string(im, cleanup) else: raise finally: if cleanup: util.perform_cleanup(scratch_image_name, scratch_text_name_root) return text if __name__=='__main__': im = Image.open("/home/oomsys/phototest.tif") text = image_to_string(im) print text try: text = image_file_to_string('fnord.tif', graceful_errors=False) except errors.Tesser_General_Exception, value: print "fnord.tif is incompatible filetype. Try graceful_errors=True" print value text = image_file_to_string('fnord.tif', graceful_errors=True) print "fnord.tif contents:", text text = image_file_to_string('fonts_test.png', graceful_errors=True) print text

  Read the article

• Hide Dynamically Added Columns/Fields

  - by baldwingrand

  I have some dynamically created rows/columns. What I'd like to do is set a section of it (txtOffsetID) to be hidden. I tried this: txtOffsetID.setAttribute('type', 'hidden'); but it didn't work. I want to hide that entire column and any new columns added. I need it to work in IE. Thanks. Sample code: function addNewOffsetItem() { var iX = document.getElementById("txtOffsetIndex").value; iX ++; document.getElementById("txtOffsetIndex").value = iX; var tbl = document.getElementById("tblOffsetDetail").getElementsByTagName("TBODY")[0]; var tr = document.createElement("TR"); tbl.appendChild(tr); //This section should be hidden. //txtOffsetID1 var tdID = document.createElement("TD"); tr.appendChild(tdID); var p = document.createElement("P"); tdID.appendChild(p); var txtOffsetID = document.createElement("input"); p.appendChild(txtOffsetID); txtOffsetID.id = "txtOffsetID" + iX; txtOffsetID.setAttribute('name','txtOffsetID' + iX); //This section should be visible. //txtOffsetComments1 var tdComments = document.createElement("TD"); tr.appendChild(tdComments); var p = document.createElement("P"); tdComments.appendChild(p); var txtOffsetComments = document.createElement("textarea"); p.appendChild(txtOffsetComments); txtOffsetComments.id = "txtOffsetComments" + iX; txtOffsetComments.setAttribute('name','txtOffsetComments' + iX); }

  Read the article

• How to find error in TCL code

  - by Adi

  Hi all, I am learning TCL and wanted to know how can I find out errors in my code. I mean what line no is error happening or how can I debug it. Following is the code which I am trying : proc ldelete {list value}{ set ix [lsearch -exact $list $value] if{$ix >=0}{ return [lreplace $list $ix $ix] } else { return $list } } Following is the error i am getting : extra characters after close-brace I will appreciate the help. Thanks aditya

  Read the article

• How CudaMalloc work?

  - by kitw

  I am trying to modify the imageDenosing class in CUDA SDK, I need to repeat the filter many time incase to capture the time. But my code doesn't work properly. //start __global__ void F1D(TColor *image,int imageW,int imageH, TColor *buffer) { const int ix = blockDim.x * blockIdx.x + threadIdx.x; const int iy = blockDim.y * blockIdx.y + threadIdx.y; if(iy != 0 && iy < imageH-1 && ix < imageW) { float4 fresult = get_color(image[imageW * iy + ix]); float4 fresult4 = get_color(image[imageW * (iy+1) + ix]); float4 fresult5 = get_color(image[imageW * (iy-1) + ix]); float4 fresult7; fresult7.x = fresult.x*0.5+fresult4.x*.25+fresult5.x*.25; fresult7.y = fresult.y*0.5+fresult4.y*.25+fresult5.y*.25; fresult7.z = fresult.z*0.5+fresult4.z*.25+fresult5.z*.25; buffer[imageW * iy + ix] = make_color(fresult7.x,fresult7.y,fresult7.z,0); } image[imageW * iy + ix] = buffer[imageW * iy + ix]; //should be use cudaMemcpy, But it fails } //extern extern "C" void cuda_F1D(TColor *dst, int imageW, int imageH) { dim3 threads(BLOCKDIM_X, BLOCKDIM_Y); dim3 grid(iDivUp(imageW, BLOCKDIM_X), iDivUp(imageH, BLOCKDIM_Y)); Copy<<<grid, threads>>>(dst, imageW, imageH); size_t size = imageW*imageH*sizeof(TColor); TColor *host =(TColor*) malloc(size); TColor *dst2; //TColor *dst3; //TColor *d = new TColor(imageW*imageH*sizeof(TColor)); dim3 threads2(imageW,1); dim3 grid2(iDivUp(imageW, imageW), iDivUp(imageH, 1)); *for(int i = 0;i<1;i++) { cudaMalloc( (void **)&dst2, size); cudaMemcpy(dst2, dst, imageW*imageH*sizeof(TColor),cudaMemcpyHostToDevice); //cudaMalloc( (void **)&dst3, imageW*imageH*sizeof(TColor)); //cudaMemcpy(dst3, dst, imageW*imageH*sizeof(TColor),cudaMemcpyHostToDevice); F1D<<<grid2, threads2>>>(dst, imageW, imageH,dst2); //cudaMemcpy(dst, dst3, imageW*imageH*sizeof(TColor),cudaMemcpyDeviceToHost); cudaFree(dst2); }* } This code works, but cant synchronise the array of image. and lead to many synchronise problem

  Read the article

• How to setup IX webhosting for an ASP.net MVC procject.

  - by Em

  IXwebhosting has stated that they do support this functionailty but when the project is uploaded you cannot access any of the pages other than the home page. Does anyone have a good guide of how to do this?

  Read the article

• What is the fastest way to Initialize a multi-dimensional array to non-default values in .NET?

  - by AMissico

  How do I initialize a multi-dimensional array of a primitive type as fast as possible? I am stuck with using multi-dimensional arrays. My problem is performance. The following routine initializes a 100x100 array in approx. 500 ticks. Removing the int.MaxValue initialization results in approx. 180 ticks just for the looping. Approximately 100 ticks to create the array without looping and without initializing to int.MaxValue. Routines similiar to this are called a few hundred-thousand to several million times during a "run". The array size will not change during a run and arrays are created one-at-a-time, used, then discarded, and a new array created. A "run" which may last from one minute (using 10x10 arrays) to forty-five minutes (100x100). The application creates arrays of int, bool, and struct. There can be multiple "runs" executing at same time, but are not because performance degrades terribly. I am using 100x100 as a base-line. I am open to suggestions on how to optimize this non-default initialization of an array. One idea I had is to use a smaller primitive type when available. For instance, using byte instead of int, saves 100 ticks. I would be happy with this, but I am hoping that I don't have to change the primitive data type. public int[,] CreateArray(Size size) { int[,] array = new int[size.Width, size.Height]; for (int x = 0; x < size.Width; x++) { for (int y = 0; y < size.Height; y++) { array[x, y] = int.MaxValue; } } return array; } Down to 450 ticks with the following: public int[,] CreateArray1(Size size) { int iX = size.Width; int iY = size.Height; int[,] array = new int[iX, iY]; for (int x = 0; x < iX; x++) { for (int y = 0; y < iY; y++) { array[x, y] = int.MaxValue; } } return array; } Down to approximately 165 ticks after a one-time initialization of 2800 ticks. (See my answer below.) If I can get stackalloc to work with multi-dimensional arrays, I should be able to get the same performance without having to intialize the private static array. private static bool _arrayInitialized5; private static int[,] _array5; public static int[,] CreateArray5(Size size) { if (!_arrayInitialized5) { int iX = size.Width; int iY = size.Height; _array5 = new int[iX, iY]; for (int x = 0; x < iX; x++) { for (int y = 0; y < iY; y++) { _array5[x, y] = int.MaxValue; } } _arrayInitialized5 = true; } return (int[,])_array5.Clone(); } Down to approximately 165 ticks without using the "clone technique" above. (See my answer below.) I am sure I can get the ticks lower, if I can just figure out the return of CreateArray9. public unsafe static int[,] CreateArray8(Size size) { int iX = size.Width; int iY = size.Height; int[,] array = new int[iX, iY]; fixed (int* pfixed = array) { int count = array.Length; for (int* p = pfixed; count-- > 0; p++) *p = int.MaxValue; } return array; }

  Read the article

• Espeak SAPI/dll usage on Windows ?

  - by Quandary

  Question: I am trying to use the espeak text-to-speech engine. So for I got it working wounderfully on linux (code below). Now I wanted to port this basic program to windows, too, but it's nearly impossible... Part of the problem is that the windows dll only allows for AUDIO_OUTPUT_SYNCHRONOUS, which means it requires a callback, but I can't figure out how to play the audio from the callback... First it crashed, then I realized, I need a callback function, now I get the data in the callback function, but I don't know how to play it... as it is neither a wav file nor plays automatically as on Linux. The sourceforge site is rather useless, because it basically says use the SAPI version, but then there is no example on how to use the sapi espeak dll... Anyway, here's my code, can anybody help? #ifdef __cplusplus #include <cstdio> #include <cstdlib> #include <cstring> else #include <stdio.h> #include <stdlib.h> #include <string.h> endif include include //#include "speak_lib.h" include "espeak/speak_lib.h" // libespeak-dev: /usr/include/espeak/speak_lib.h // apt-get install libespeak-dev // apt-get install libportaudio-dev // g++ -o mine mine.cpp -lespeak // g++ -o mine mine.cpp -I/usr/include/espeak/ -lespeak // gcc -o mine mine.cpp -I/usr/include/espeak/ -lespeak char voicename[40]; int samplerate; int quiet = 0; static char genders[4] = {' ','M','F',' '}; //const char *data_path = "/usr/share/"; // /usr/share/espeak-data/ const char *data_path = NULL; // use default path for espeak-data int strrcmp(const char *s, const char *sub) { int slen = strlen(s); int sublen = strlen(sub); return memcmp(s + slen - sublen, sub, sublen); } char * strrcpy(char *dest, const char *source) { // Pre assertions assert(dest != NULL); assert(source != NULL); assert(dest != source); // tk: parentheses while((*dest++ = *source++)) ; return(--dest); } const char* GetLanguageVoiceName(const char* pszShortSign) { #define LANGUAGE_LENGTH 30 static char szReturnValue[LANGUAGE_LENGTH] ; memset(szReturnValue, 0, LANGUAGE_LENGTH); for (int i = 0; pszShortSign[i] != '\0'; ++i) szReturnValue[i] = (char) tolower(pszShortSign[i]); const espeak_VOICE **voices; espeak_VOICE voice_select; voices = espeak_ListVoices(NULL); const espeak_VOICE *v; for(int ix=0; (v = voices[ix]) != NULL; ix++) { if( !strrcmp( v->languages, szReturnValue) ) { strcpy(szReturnValue, v->name); return szReturnValue; } } // End for strcpy(szReturnValue, "default"); return szReturnValue; } // End function getvoicename void ListVoices() { const espeak_VOICE **voices; espeak_VOICE voice_select; voices = espeak_ListVoices(NULL); const espeak_VOICE *v; for(int ix=0; (v = voices[ix]) != NULL; ix++) { printf("Shortsign: %s\n", v->languages); printf("age: %d\n", v->age); printf("gender: %c\n", genders[v->gender]); printf("name: %s\n", v->name); printf("\n\n"); } // End for } // End function getvoicename int main() { printf("Hello World!\n"); const char* szVersionInfo = espeak_Info(NULL); printf("Espeak version: %s\n", szVersionInfo); samplerate = espeak_Initialize(AUDIO_OUTPUT_PLAYBACK,0,data_path,0); strcpy(voicename, "default"); // espeak --voices strcpy(voicename, "german"); strcpy(voicename, GetLanguageVoiceName("DE")); if(espeak_SetVoiceByName(voicename) != EE_OK) { printf("Espeak setvoice error...\n"); } static char word[200] = "Hello World" ; strcpy(word, "TV-fäns aufgepasst, es ist 20 Uhr 15. Zeit für Rambo 3"); strcpy(word, "Unnamed Player wurde zum Opfer von GSG9"); int speed = 220; int volume = 500; // volume in range 0-100 0=silence int pitch = 50; // base pitch, range 0-100. 50=normal // espeak.cpp 625 espeak_SetParameter(espeakRATE, speed, 0); espeak_SetParameter(espeakVOLUME,volume,0); espeak_SetParameter(espeakPITCH,pitch,0); // espeakRANGE: pitch range, range 0-100. 0-monotone, 50=normal // espeakPUNCTUATION: which punctuation characters to announce: // value in espeak_PUNCT_TYPE (none, all, some), espeak_VOICE *voice_spec = espeak_GetCurrentVoice(); voice_spec->gender=2; // 0=none 1=male, 2=female, //voice_spec->age = age; espeak_SetVoiceByProperties(voice_spec); espeak_Synth( (char*) word, strlen(word)+1, 0, POS_CHARACTER, 0, espeakCHARS_AUTO, NULL, NULL); espeak_Synchronize(); strcpy(voicename, GetLanguageVoiceName("EN")); espeak_SetVoiceByName(voicename); strcpy(word, "Geany was fragged by GSG9 Googlebot"); strcpy(word, "Googlebot"); espeak_Synth( (char*) word, strlen(word)+1, 0, POS_CHARACTER, 0, espeakCHARS_AUTO, NULL, NULL); espeak_Synchronize(); espeak_Terminate(); printf("Espeak terminated\n"); return EXIT_SUCCESS; } /* if(espeak_SetVoiceByName(voicename) != EE_OK) { memset(&voice_select,0,sizeof(voice_select)); voice_select.languages = voicename; if(espeak_SetVoiceByProperties(&voice_select) != EE_OK) { fprintf(stderr,"%svoice '%s'\n",err_load,voicename); exit(2); } } */ The above code is for Linux. The below code is about as far as I got on Vista x64 (32 bit emu): #ifdef __cplusplus #include <cstdio> #include <cstdlib> #include <cstring> else #include <stdio.h> #include <stdlib.h> #include <string.h> endif include include include "speak_lib.h" //#include "espeak/speak_lib.h" // libespeak-dev: /usr/include/espeak/speak_lib.h // apt-get install libespeak-dev // apt-get install libportaudio-dev // g++ -o mine mine.cpp -lespeak // g++ -o mine mine.cpp -I/usr/include/espeak/ -lespeak // gcc -o mine mine.cpp -I/usr/include/espeak/ -lespeak char voicename[40]; int iSampleRate; int quiet = 0; static char genders[4] = {' ','M','F',' '}; //const char *data_path = "/usr/share/"; // /usr/share/espeak-data/ //const char *data_path = NULL; // use default path for espeak-data const char *data_path = "C:\Users\Username\Desktop\espeak-1.43-source\espeak-1.43-source\"; int strrcmp(const char *s, const char *sub) { int slen = strlen(s); int sublen = strlen(sub); return memcmp(s + slen - sublen, sub, sublen); } char * strrcpy(char *dest, const char *source) { // Pre assertions assert(dest != NULL); assert(source != NULL); assert(dest != source); // tk: parentheses while((*dest++ = *source++)) ; return(--dest); } const char* GetLanguageVoiceName(const char* pszShortSign) { #define LANGUAGE_LENGTH 30 static char szReturnValue[LANGUAGE_LENGTH] ; memset(szReturnValue, 0, LANGUAGE_LENGTH); for (int i = 0; pszShortSign[i] != '\0'; ++i) szReturnValue[i] = (char) tolower(pszShortSign[i]); const espeak_VOICE **voices; espeak_VOICE voice_select; voices = espeak_ListVoices(NULL); const espeak_VOICE *v; for(int ix=0; (v = voices[ix]) != NULL; ix++) { if( !strrcmp( v->languages, szReturnValue) ) { strcpy(szReturnValue, v->name); return szReturnValue; } } // End for strcpy(szReturnValue, "default"); return szReturnValue; } // End function getvoicename void ListVoices() { const espeak_VOICE **voices; espeak_VOICE voice_select; voices = espeak_ListVoices(NULL); const espeak_VOICE *v; for(int ix=0; (v = voices[ix]) != NULL; ix++) { printf("Shortsign: %s\n", v->languages); printf("age: %d\n", v->age); printf("gender: %c\n", genders[v->gender]); printf("name: %s\n", v->name); printf("\n\n"); } // End for } // End function getvoicename /* Callback from espeak. Directly speaks using AudioTrack. */ define LOGI(x) printf("%s\n", x) static int AndroidEspeakDirectSpeechCallback(short *wav, int numsamples, espeak_EVENT *events) { char buf[100]; sprintf(buf, "AndroidEspeakDirectSpeechCallback: %d samples", numsamples); LOGI(buf); if (wav == NULL) { LOGI("Null: speech has completed"); } if (numsamples > 0) { //audout->write(wav, sizeof(short) * numsamples); sprintf(buf, "AudioTrack wrote: %d bytes", sizeof(short) * numsamples); LOGI(buf); } return 0; // continue synthesis (1 is to abort) } static int AndroidEspeakSynthToFileCallback(short *wav, int numsamples,espeak_EVENT *events) { char buf[100]; sprintf(buf, "AndroidEspeakSynthToFileCallback: %d samples", numsamples); LOGI(buf); if (wav == NULL) { LOGI("Null: speech has completed"); } // The user data should contain the file pointer of the file to write to //void* user_data = events->user_data; FILE* user_data = fopen ( "myfile1.wav" , "ab" ); FILE* fp = static_cast<FILE *>(user_data); // Write all of the samples fwrite(wav, sizeof(short), numsamples, fp); return 0; // continue synthesis (1 is to abort) } int main() { printf("Hello World!\n"); const char* szVersionInfo = espeak_Info(NULL); printf("Espeak version: %s\n", szVersionInfo); iSampleRate = espeak_Initialize(AUDIO_OUTPUT_SYNCHRONOUS, 4096, data_path, 0); if (iSampleRate <= 0) { printf("Unable to initialize espeak"); return EXIT_FAILURE; } //samplerate = espeak_Initialize(AUDIO_OUTPUT_PLAYBACK,0,data_path,0); //ListVoices(); strcpy(voicename, "default"); // espeak --voices //strcpy(voicename, "german"); //strcpy(voicename, GetLanguageVoiceName("DE")); if(espeak_SetVoiceByName(voicename) != EE_OK) { printf("Espeak setvoice error...\n"); } static char word[200] = "Hello World" ; strcpy(word, "TV-fäns aufgepasst, es ist 20 Uhr 15. Zeit für Rambo 3"); strcpy(word, "Unnamed Player wurde zum Opfer von GSG9"); int speed = 220; int volume = 500; // volume in range 0-100 0=silence int pitch = 50; // base pitch, range 0-100. 50=normal // espeak.cpp 625 espeak_SetParameter(espeakRATE, speed, 0); espeak_SetParameter(espeakVOLUME,volume,0); espeak_SetParameter(espeakPITCH,pitch,0); // espeakRANGE: pitch range, range 0-100. 0-monotone, 50=normal // espeakPUNCTUATION: which punctuation characters to announce: // value in espeak_PUNCT_TYPE (none, all, some), //espeak_VOICE *voice_spec = espeak_GetCurrentVoice(); //voice_spec->gender=2; // 0=none 1=male, 2=female, //voice_spec->age = age; //espeak_SetVoiceByProperties(voice_spec); //espeak_SetSynthCallback(AndroidEspeakDirectSpeechCallback); espeak_SetSynthCallback(AndroidEspeakSynthToFileCallback); unsigned int unique_identifier; espeak_ERROR err = espeak_Synth( (char*) word, strlen(word)+1, 0, POS_CHARACTER, 0, espeakCHARS_AUTO, &unique_identifier, NULL); err = espeak_Synchronize(); /* strcpy(voicename, GetLanguageVoiceName("EN")); espeak_SetVoiceByName(voicename); strcpy(word, "Geany was fragged by GSG9 Googlebot"); strcpy(word, "Googlebot"); espeak_Synth( (char*) word, strlen(word)+1, 0, POS_CHARACTER, 0, espeakCHARS_AUTO, NULL, NULL); espeak_Synchronize(); */ // espeak_Cancel(); espeak_Terminate(); printf("Espeak terminated\n"); system("pause"); return EXIT_SUCCESS; }

  Read the article

• two arrays defining 2d coordinates, as array indices, in matlab/octave

  - by Jason

  Hi, I have a 2D array, call it 'A'. I have two other 2D arrays, call them 'ix' and 'iy'. I would like to create an output array whose elements are the elements of A at the index pairs provided by x_idx and y_idx. I can do this with a loop as follows: for i=1:nx for j=1:ny output(i,j) = A(ix(i,j),iy(i,j)); end end How can I do this without the loop? If I do output = A(ix,iy), I get the value of A over the whole range of (ix)X(iy). Thank you, Jason

  Read the article

• Better code for accessing fields in a matlab structure array?

  - by John

  I have a matlab structure array Modles1 of size (1x180) that has fields a, b, c, ..., z. I want to understand how many distinct values there are in each of the fields. i.e. max(grp2idx([foo(:).a])) The above works if the field a is a double. {foo(:).a} needs to be used in the case where the field a is a string/char. Here's my current code for doing this. I hate having to use the eval, and what is essentially a switch statement. Is there a better way? names = fieldnames(Models1); for ix = 1 : numel(names) className = eval(['class(Models1(1).',names{ix},')']); if strcmp('double', className) || strcmp('logical',className) eval([' values = [Models1(:).',names{ix},'];']); elseif strcmp('char', className) eval([' values = {Models1(:).',names{ix},'};']); else disp(['Unrecognized class: ', className]); end % this line requires the statistics toolbox. [g, gn, gl] = grp2idx(values); fprintf('%30s : %4d\n',names{ix},max(g)); end

  Read the article

• SQL server deadlock between INSERT and SELECT statement

  - by dtroy

  Hi! I've got a problem with multiple deadlocks on SQL server 2005. This one is between an INSERT and a SELECT statement. There are two tables. Table 1 and Table2. Table2 has Table1's PK (table1_id) as foreign key. Index on table1_id is clustered. The INSERT inserts a single row into table2 at a time. The SELCET joins the 2 tables. (it's a long query which might take up to 12 secs to run) According to my understanding (and experiments) the INSERT should acquire an IS lock on table1 to check referential integrity (which should not cause a deadlock). But, in this case it acquired an IX page lock The deadlock report: <deadlock-list> <deadlock victim="process968898"> <process-list> <process id="process8db1f8" taskpriority="0" logused="2424" waitresource="OBJECT: 5:789577851:0 " waittime="12390" ownerId="61831512" transactionname="user_transaction" lasttranstarted="2010-04-16T07:10:13.347" XDES="0x222a8250" lockMode="IX" schedulerid="1" kpid="3764" status="suspended" spid="52" sbid="0" ecid="0" priority="0" transcount="2" lastbatchstarted="2010-04-16T07:10:13.350" lastbatchcompleted="2010-04-16T07:10:13.347" clientapp=".Net SqlClient Data Provider" hostname="VIDEV01-B-ME" hostpid="3040" loginname="DatabaseName" isolationlevel="read uncommitted (1)" xactid="61831512" currentdb="5" lockTimeout="4294967295" clientoption1="671088672" clientoption2="128056"> <executionStack> <frame procname="DatabaseName.dbo.prcTable2_Insert" line="18" stmtstart="576" stmtend="1148" sqlhandle="0x0300050079e62d06e9307f000b9d00000100000000000000"> INSERT INTO dbo.Table2 ( f1, table1_id, f2 ) VALUES ( @p1, @p_DocumentVersionID, @p1 ) </frame> </executionStack> <inputbuf> Proc [Database Id = 5 Object Id = 103671417] </inputbuf> </process> <process id="process968898" taskpriority="0" logused="0" waitresource="PAGE: 5:1:46510" waittime="7625" ownerId="61831406" transactionname="INSERT" lasttranstarted="2010-04-16T07:10:12.717" XDES="0x418ec00" lockMode="S" schedulerid="2" kpid="1724" status="suspended" spid="53" sbid="0" ecid="0" priority="0" transcount="2" lastbatchstarted="2010-04-16T07:10:12.713" lastbatchcompleted="2010-04-16T07:10:12.713" clientapp=".Net SqlClient Data Provider" hostname="VIDEV01-B-ME" hostpid="3040" loginname="DatabaseName" isolationlevel="read committed (2)" xactid="61831406" currentdb="5" lockTimeout="4294967295" clientoption1="671088672" clientoption2="128056"> <executionStack> <frame procname="DatabaseName.dbo.prcGetList" line="64" stmtstart="3548" stmtend="11570" sqlhandle="0x03000500dbcec17e8d267f000b9d00000100000000000000"> <!-- XXXXXXXXXXXXXX...SELECT STATEMENT WITH Multiple joins including both Table2 table 1 and .... XXXXXXXXXXXXXXX --> </frame> </executionStack> <inputbuf> Proc [Database Id = 5 Object Id = 2126630619] </inputbuf> </process> </process-list> <resource-list> <pagelock fileid="1" pageid="46510" dbid="5" objectname="DatabaseName.dbo.table1" id="lock6236bc0" mode="IX" associatedObjectId="72057594042908672"> <owner-list> <owner id="process8db1f8" mode="IX"/> </owner-list> <waiter-list> <waiter id="process968898" mode="S" requestType="wait"/> </waiter-list> </pagelock> <objectlock lockPartition="0" objid="789577851" subresource="FULL" dbid="5" objectname="DatabaseName.dbo.Table2" id="lock970a240" mode="S" associatedObjectId="789577851"> <owner-list> <owner id="process968898" mode="S"/> </owner-list> <waiter-list> <waiter id="process8db1f8" mode="IX" requestType="wait"/> </waiter-list> </objectlock> </resource-list> </deadlock> </deadlock-list> Can anyone explain why the INSERT gets the IX page lock ? Am I not reading the deadlock report properly? BTW, I have not managed to reproduce this issue. Thanks!

  Read the article

• Non standard interaction among two tables to avoid very large merge

  - by riko

  Suppose I have two tables A and B. Table A has a multi-level index (a, b) and one column (ts). b determines univocally ts. A = pd.DataFrame( [('a', 'x', 4), ('a', 'y', 6), ('a', 'z', 5), ('b', 'x', 4), ('b', 'z', 5), ('c', 'y', 6)], columns=['a', 'b', 'ts']).set_index(['a', 'b']) AA = A.reset_index() Table B is another one-column (ts) table with non-unique index (a). The ts's are sorted "inside" each group, i.e., B.ix[x] is sorted for each x. Moreover, there is always a value in B.ix[x] that is greater than or equal to the values in A. B = pd.DataFrame( dict(a=list('aaaaabbcccccc'), ts=[1, 2, 4, 5, 7, 7, 8, 1, 2, 4, 5, 8, 9])).set_index('a') The semantics in this is that B contains observations of occurrences of an event of type indicated by the index. I would like to find from B the timestamp of the first occurrence of each event type after the timestamp specified in A for each value of b. In other words, I would like to get a table with the same shape of A, that instead of ts contains the "minimum value occurring after ts" as specified by table B. So, my goal would be: C: ('a', 'x') 4 ('a', 'y') 7 ('a', 'z') 5 ('b', 'x') 7 ('b', 'z') 7 ('c', 'y') 8 I have some working code, but is terribly slow. C = AA.apply(lambda row: ( row[0], row[1], B.ix[row[0]].irow(np.searchsorted(B.ts[row[0]], row[2]))), axis=1).set_index(['a', 'b']) Profiling shows the culprit is obviously B.ix[row[0]].irow(np.searchsorted(B.ts[row[0]], row[2]))). However, standard solutions using merge/join would take too much RAM in the long run. Consider that now I have 1000 a's, assume constant the average number of b's per a (probably 100-200), and consider that the number of observations per a is probably in the order of 300. In production I will have 1000 more a's. 1,000,000 x 200 x 300 = 60,000,000,000 rows may be a bit too much to keep in RAM, especially considering that the data I need is perfectly described by a C like the one I discussed above. How would I improve the performance?

  Read the article

• tkinter python entry not being displayed

  - by user1050619

  I have created a Form with labels and entries..but for some reason the entries are not being created, peoplegui.py from tkinter import * from tkinter.messagebox import showerror import shelve shelvename = 'class-shelve' fieldnames = ('name','age','job','pay') def makewidgets(): global entries window = Tk() window.title('People Shelve') form = Frame(window) form.pack() entries = {} for (ix, label) in enumerate(('key',) + fieldnames): lab = Label(form, text=label) ent = Entry(form) lab.grid(row=ix, column=0) lab.grid(row=ix, column=1) entries[label] = ent Button(window, text="Fetch", command=fetchRecord).pack(side=LEFT) Button(window, text="Update", command=updateRecord).pack(side=LEFT) Button(window, text="Quit", command=window.quit).pack(side=RIGHT) return window def fetchRecord(): print('In fetch') def updateRecord(): print('In update') if __name__ == '__main__': window = makewidgets() window.mainloop() When I run it the labels are created but not the entries.

  Read the article

• Is scala functional programming slower than traditional coding?

  - by Fred Haslam

  In one of my first attempts to create functional code, I ran into a performance issue. I started with a common task - multiply the elements of two arrays and sum up the results: var first:Array[Float] ... var second:Array[Float] ... var sum=0f; for(ix<-0 until first.length) sum += first(ix) * second(ix); Here is how I reformed the work: sum = first.zip(second).map{ case (a,b) => a*b }.reduceLeft(_+_) When I benchmarked the two approaches, the second method takes 40 times as long to complete! Why does the second method take so much longer? How can I reform the work to be both speed efficient and use functional programming style?

  Read the article

• WPF/Silverlight DataBinding to interface property (with hidden implementation)

  - by Dave

  I have the following (C#) code namespace A { interface IX { bool Prop { get; set; } } class X : IX { public bool Prop { ... } } // hidden implementation of IX } namespace B { .. A.IX x = ...; object.DataContext = x; object.SetBinding(SomeDependencyProperty, new Binding("Prop")); .. } So I have a hidden implementation of an interface with a property "Prop" and I need to bind to this property in code. My problem is that the binding isn't working unless I make class X public. Is there any way around this problem?

  Read the article

• Which of these algorithms is best for my goal?

  - by JonathonG

  I have created a program that restricts the mouse to a certain region based on a black/white bitmap. The program is 100% functional as-is, but uses an inaccurate, albeit fast, algorithm for repositioning the mouse when it strays outside the area. Currently, when the mouse moves outside the area, basically what happens is this: A line is drawn between a pre-defined static point inside the region and the mouse's new position. The point where that line intersects the edge of the allowed area is found. The mouse is moved to that point. This works, but only works perfectly for a perfect circle with the pre-defined point set in the exact center. Unfortunately, this will never be the case. The application will be used with a variety of rectangles and irregular, amorphous shapes. On such shapes, the point where the line drawn intersects the edge will usually not be the closest point on the shape to the mouse. I need to create a new algorithm that finds the closest point to the mouse's new position on the edge of the allowed area. I have several ideas about this, but I am not sure of their validity, in that they may have far too much overhead. While I am not asking for code, it might help to know that I am using Objective C / Cocoa, developing for OS X, as I feel the language being used might affect the efficiency of potential methods. My ideas are: Using a bit of trigonometry to project lines would work, but that would require some kind of intense algorithm to test every point on every line until it found the edge of the region... That seems too resource intensive since there could be something like 200 lines that would have each have to have as many as 200 pixels checked for black/white.... Using something like an A* pathing algorithm to find the shortest path to a black pixel; however, A* seems resource intensive, even though I could probably restrict it to only checking roughly in one direction. It also seems like it will take more time and effort than I have available to spend on this small portion of the much larger project I am working on, correct me if I am wrong and it would not be a significant amount of code (100 lines or around there). Mapping the border of the region before the application begins running the event tap loop. I think I could accomplish this by using my current line-based algorithm to find an edge point and then initiating an algorithm that checks all 8 pixels around that pixel, finds the next border pixel in one direction, and continues to do this until it comes back to the starting pixel. I could then store that data in an array to be used for the entire duration of the program, and have the mouse re-positioning method check the array for the closest pixel on the border to the mouse target position. That last method would presumably execute it's initial border mapping fairly quickly. (It would only have to map between 2,000 and 8,000 pixels, which means 8,000 to 64,000 checked, and I could even permanently store the data to make launching faster.) However, I am uncertain as to how much overhead it would take to scan through that array for the shortest distance for every single mouse move event... I suppose there could be a shortcut to restrict the number of elements in the array that will be checked to a variable number starting with the intersecting point on the line (from my original algorithm), and raise/lower that number to experiment with the overhead/accuracy tradeoff. Please let me know if I am over thinking this and there is an easier way that will work just fine, or which of these methods would be able to execute something like 30 times per second to keep mouse movement smooth, or if you have a better/faster method. I've posted relevant parts of my code below for reference, and included an example of what the area might look like. (I check for color value against a loaded bitmap that is black/white.) // // This part of my code runs every single time the mouse moves. // CGPoint point = CGEventGetLocation(event); float tX = point.x; float tY = point.y; if( is_in_area(tX,tY, mouse_mask)){ // target is inside O.K. area, do nothing }else{ CGPoint target; //point inside restricted region: float iX = 600; // inside x float iY = 500; // inside y // delta to midpoint between iX,iY and tX,tY float dX; float dY; float accuracy = .5; //accuracy to loop until reached do { dX = (tX-iX)/2; dY = (tY-iY)/2; if(is_in_area((tX-dX),(tY-dY),mouse_mask)){ iX += dX; iY += dY; } else { tX -= dX; tY -= dY; } } while (abs(dX)>accuracy || abs(dY)>accuracy); target = CGPointMake(roundf(tX), roundf(tY)); CGDisplayMoveCursorToPoint(CGMainDisplayID(),target); } Here is "is_in_area(int x, int y)" : bool is_in_area(NSInteger x, NSInteger y, NSBitmapImageRep *mouse_mask){ NSAutoreleasePool * pool = [[NSAutoreleasePool alloc] init]; NSUInteger pixel[4]; [mouse_mask getPixel:pixel atX:x y:y]; if(pixel[0]!= 0){ [pool release]; return false; } [pool release]; return true; }

  Read the article

• Advantage Database Server: slow stored procedure performance.

  - by ie

  I have a question about a performance of stored procedures in the ADS. I created a simple database with the following structure: CREATE TABLE MainTable ( Id INTEGER PRIMARY KEY, Name VARCHAR(50), Value INTEGER ); CREATE UNIQUE INDEX MainTableName_UIX ON MainTable ( Name ); CREATE TABLE SubTable ( Id INTEGER PRIMARY KEY, MainId INTEGER, Name VARCHAR(50), Value INTEGER ); CREATE INDEX SubTableMainId_UIX ON SubTable ( MainId ); CREATE UNIQUE INDEX SubTableName_UIX ON SubTable ( Name ); CREATE PROCEDURE CreateItems ( MainName VARCHAR ( 20 ), SubName VARCHAR ( 20 ), MainValue INTEGER, SubValue INTEGER, MainId INTEGER OUTPUT, SubId INTEGER OUTPUT ) BEGIN DECLARE @MainName VARCHAR ( 20 ); DECLARE @SubName VARCHAR ( 20 ); DECLARE @MainValue INTEGER; DECLARE @SubValue INTEGER; DECLARE @MainId INTEGER; DECLARE @SubId INTEGER; @MainName = (SELECT MainName FROM __input); @SubName = (SELECT SubName FROM __input); @MainValue = (SELECT MainValue FROM __input); @SubValue = (SELECT SubValue FROM __input); @MainId = (SELECT MAX(Id)+1 FROM MainTable); @SubId = (SELECT MAX(Id)+1 FROM SubTable ); INSERT INTO MainTable (Id, Name, Value) VALUES (@MainId, @MainName, @MainValue); INSERT INTO SubTable (Id, Name, MainId, Value) VALUES (@SubId, @SubName, @MainId, @SubValue); INSERT INTO __output SELECT @MainId, @SubId FROM system.iota; END; CREATE PROCEDURE UpdateItems ( MainName VARCHAR ( 20 ), MainValue INTEGER, SubValue INTEGER ) BEGIN DECLARE @MainName VARCHAR ( 20 ); DECLARE @MainValue INTEGER; DECLARE @SubValue INTEGER; DECLARE @MainId INTEGER; @MainName = (SELECT MainName FROM __input); @MainValue = (SELECT MainValue FROM __input); @SubValue = (SELECT SubValue FROM __input); @MainId = (SELECT TOP 1 Id FROM MainTable WHERE Name = @MainName); UPDATE MainTable SET Value = @MainValue WHERE Id = @MainId; UPDATE SubTable SET Value = @SubValue WHERE MainId = @MainId; END; CREATE PROCEDURE SelectItems ( MainName VARCHAR ( 20 ), CalculatedValue INTEGER OUTPUT ) BEGIN DECLARE @MainName VARCHAR ( 20 ); @MainName = (SELECT MainName FROM __input); INSERT INTO __output SELECT m.Value * s.Value FROM MainTable m INNER JOIN SubTable s ON m.Id = s.MainId WHERE m.Name = @MainName; END; CREATE PROCEDURE DeleteItems ( MainName VARCHAR ( 20 ) ) BEGIN DECLARE @MainName VARCHAR ( 20 ); DECLARE @MainId INTEGER; @MainName = (SELECT MainName FROM __input); @MainId = (SELECT TOP 1 Id FROM MainTable WHERE Name = @MainName); DELETE FROM SubTable WHERE MainId = @MainId; DELETE FROM MainTable WHERE Id = @MainId; END; Actually, the problem I had - even so light stored procedures work very-very slow (about 50-150 ms) relatively to plain queries (0-5ms). To test the performance, I created a simple test (in F# using ADS ADO.NET provider): open System; open System.Data; open System.Diagnostics; open Advantage.Data.Provider; let mainName = "main name #"; let subName = "sub name #"; // INSERT let cmdTextScriptInsert = " DECLARE @MainId INTEGER; DECLARE @SubId INTEGER; @MainId = (SELECT MAX(Id)+1 FROM MainTable); @SubId = (SELECT MAX(Id)+1 FROM SubTable ); INSERT INTO MainTable (Id, Name, Value) VALUES (@MainId, :MainName, :MainValue); INSERT INTO SubTable (Id, Name, MainId, Value) VALUES (@SubId, :SubName, @MainId, :SubValue); SELECT @MainId, @SubId FROM system.iota;"; let cmdTextProcedureInsert = "CreateItems"; // UPDATE let cmdTextScriptUpdate = " DECLARE @MainId INTEGER; @MainId = (SELECT TOP 1 Id FROM MainTable WHERE Name = :MainName); UPDATE MainTable SET Value = :MainValue WHERE Id = @MainId; UPDATE SubTable SET Value = :SubValue WHERE MainId = @MainId;"; let cmdTextProcedureUpdate = "UpdateItems"; // SELECT let cmdTextScriptSelect = " SELECT m.Value * s.Value FROM MainTable m INNER JOIN SubTable s ON m.Id = s.MainId WHERE m.Name = :MainName;"; let cmdTextProcedureSelect = "SelectItems"; // DELETE let cmdTextScriptDelete = " DECLARE @MainId INTEGER; @MainId = (SELECT TOP 1 Id FROM MainTable WHERE Name = :MainName); DELETE FROM SubTable WHERE MainId = @MainId; DELETE FROM MainTable WHERE Id = @MainId;"; let cmdTextProcedureDelete = "DeleteItems"; let cnnStr = @"data source=D:\DB\test.add; ServerType=local; user id=adssys; password=***;"; let cnn = new AdsConnection(cnnStr); try cnn.Open(); let cmd = cnn.CreateCommand(); let parametrize ix prms = cmd.Parameters.Clear(); let addParam = function | "MainName" -> cmd.Parameters.Add(":MainName" , mainName + ix.ToString()) |> ignore; | "SubName" -> cmd.Parameters.Add(":SubName" , subName + ix.ToString() ) |> ignore; | "MainValue" -> cmd.Parameters.Add(":MainValue", ix * 3 ) |> ignore; | "SubValue" -> cmd.Parameters.Add(":SubValue" , ix * 7 ) |> ignore; | _ -> () prms |> List.iter addParam; let runTest testData = let (cmdType, cmdName, cmdText, cmdParams) = testData; let toPrefix cmdType cmdName = let prefix = match cmdType with | CommandType.StoredProcedure -> "Procedure-" | CommandType.Text -> "Script -" | _ -> "Unknown -" in prefix + cmdName; let stopWatch = new Stopwatch(); let runStep ix prms = parametrize ix prms; stopWatch.Start(); cmd.ExecuteNonQuery() |> ignore; stopWatch.Stop(); cmd.CommandText <- cmdText; cmd.CommandType <- cmdType; let startId = 1500; let count = 10; for id in startId .. startId+count do runStep id cmdParams; let elapsed = stopWatch.Elapsed; Console.WriteLine("Test '{0}' - total: {1}; per call: {2}ms", toPrefix cmdType cmdName, elapsed, Convert.ToInt32(elapsed.TotalMilliseconds)/count); let lst = [ (CommandType.Text, "Insert", cmdTextScriptInsert, ["MainName"; "SubName"; "MainValue"; "SubValue"]); (CommandType.Text, "Update", cmdTextScriptUpdate, ["MainName"; "MainValue"; "SubValue"]); (CommandType.Text, "Select", cmdTextScriptSelect, ["MainName"]); (CommandType.Text, "Delete", cmdTextScriptDelete, ["MainName"]) (CommandType.StoredProcedure, "Insert", cmdTextProcedureInsert, ["MainName"; "SubName"; "MainValue"; "SubValue"]); (CommandType.StoredProcedure, "Update", cmdTextProcedureUpdate, ["MainName"; "MainValue"; "SubValue"]); (CommandType.StoredProcedure, "Select", cmdTextProcedureSelect, ["MainName"]); (CommandType.StoredProcedure, "Delete", cmdTextProcedureDelete, ["MainName"])]; lst |> List.iter runTest; finally cnn.Close(); And I'm getting the following results: Test 'Script -Insert' - total: 00:00:00.0292841; per call: 2ms Test 'Script -Update' - total: 00:00:00.0056296; per call: 0ms Test 'Script -Select' - total: 00:00:00.0051738; per call: 0ms Test 'Script -Delete' - total: 00:00:00.0059258; per call: 0ms Test 'Procedure-Insert' - total: 00:00:01.2567146; per call: 125ms Test 'Procedure-Update' - total: 00:00:00.7442440; per call: 74ms Test 'Procedure-Select' - total: 00:00:00.5120446; per call: 51ms Test 'Procedure-Delete' - total: 00:00:01.0619165; per call: 106ms The situation with the remote server is much better, but still a great gap between plaqin queries and stored procedures: Test 'Script -Insert' - total: 00:00:00.0709299; per call: 7ms Test 'Script -Update' - total: 00:00:00.0161777; per call: 1ms Test 'Script -Select' - total: 00:00:00.0258113; per call: 2ms Test 'Script -Delete' - total: 00:00:00.0166242; per call: 1ms Test 'Procedure-Insert' - total: 00:00:00.5116138; per call: 51ms Test 'Procedure-Update' - total: 00:00:00.3802251; per call: 38ms Test 'Procedure-Select' - total: 00:00:00.1241245; per call: 12ms Test 'Procedure-Delete' - total: 00:00:00.4336334; per call: 43ms Is it any chance to improve the SP performance? Please advice. ADO.NET driver version - 9.10.2.9 Server version - 9.10.0.9 (ANSI - GERMAN, OEM - GERMAN) Thanks!

  Read the article

• PriorityQueue update problems

  - by Bharat

  After going through a bunch of questions here on SO, I still have no idea what exactly is going wrong with my code and would appreciate some help. I'm trying to implement a priority queue based on f-costs for an A* algorithm, and while the algorithm works fine for short pathfinding distances, it seems to go wrong when there's an obstacle or when the distance between start and goal points is greater than about 30 squares (although sometimes it screws up for less too). while(!m_qOpenList.isEmpty()) { m_xCurrent=m_qOpenList.poll(); m_xCurrent.setBackground(Color.red); m_qClosedList.add(m_xCurrent); if(m_xCurrent.getStatus()==2) { System.out.println("Target Reached"); solved=true; break; } iX=m_xCurrent.getXCo(); iY=m_xCurrent.getYCo(); for(i=iX-1;i<=iX+1;i++) for(j=iY-1;j<=iY+1;j++) { if(i<0||j<0||i>m_iMazeX||j>m_iMazeX||(i==iX&&j==iY) || m_xNode[i][j].getStatus()==4|| m_qClosedList.contains(m_xNode[i][j])) continue; m_xNode[i][j].score(m_xCurrent,m_xGoal); m_qOpenList.add(m_xNode[i][j]); } } It's quite rudimentary as I'm just trying to get it to work for now. m_qOpenList is the PriorityQueue. The problem is that when I debug the program, at some point (near an obstacle), a Node with a fcost of say 84 has higher priority than a node with an fcost of 70. I am not attempting to modify the values once they're on the priority queue. You'll notice that I add at the end of the while loop (I read somewhere that the priorityqueue reorders itself when stuff is added to it), and poll right after that at the beginning. Status of 2 means the Node is the goal, and a status of 4 means that it is unwalkable. public int compareTo(Node o) { if(m_iF<o.m_iF) return -1; if(m_iF>o.m_iF) return 1; return 0; } And that's the compareTo function. Can you see a problem? =(

  Read the article

• Is READ UNCOMMITTED / NOLOCK safe in this situation?

  - by Ben Challenor

  I know that snapshot isolation would fix this problem, but I'm wondering if NOLOCK is safe in this specific case so that I can avoid the overhead. I have a table that looks something like this: drop table Data create table Data ( Id BIGINT NOT NULL, Date BIGINT NOT NULL, Value BIGINT, constraint Cx primary key (Date, Id) ) create nonclustered index Ix on Data (Id, Date) There are no updates to the table, ever. Deletes can occur but they should never contend with the SELECT because they affect the other, older end of the table. Inserts are regular and page splits to the (Id, Date) index are extremely common. I have a deadlock situation between a standard INSERT and a SELECT that looks like this: select top 1 Date, Value from Data where Id = @p0 order by Date desc because the INSERT acquires a lock on Cx (Date, Id; Value) and then Ix (Id, Date), but the SELECT acquires a lock on Ix (Id, Date) and then Cx (Date, Id; Value). This is because the SELECT first seeks on Ix and then joins to a seek on Cx. Swapping the clustered and non-clustered index would break this cycle, but it is not an acceptable solution because it would introduce cycles with other (more complex) SELECTs. If I add NOLOCK to the SELECT, can it go wrong in this case? Can it return: More than one row, even though I asked for TOP 1? No rows, even though one exists and has been committed? Worst of all, a row that doesn't satisfy the WHERE clause? I've done a lot of reading about this online, but the only reproductions of over- or under-count anomalies I've seen (one, two) involve a scan. This involves only seeks. Jeff Atwood has a post about using NOLOCK that generated a good discussion. I was particularly interested in a comment by Rick Townsend: Secondly, if you read dirty data, the risk you run is of reading the entirely wrong row. For example, if your select reads an index to find your row, then the update changes the location of the rows (e.g.: due to a page split or an update to the clustered index), when your select goes to read the actual data row, it's either no longer there, or a different row altogether! Is this possible with inserts only, and no updates? If so, then I guess even my seeks on an insert-only table could be dangerous. Update: I'm trying to figure out how snapshot isolation works. It seems to be row-based, where transactions read the table (with no shared lock!), find the row they are interested in, and then see if they need to get an old version of the row from the version store in tempdb. But in my case, no row will have more than one version, so the version store seems rather pointless. And if the row was found with no shared lock, how is it different to just using NOLOCK?

  Read the article

1 2 3 4  | Next Page >