Search Results

Search found 52 results on 3 pages for 'hamachi'.

facebook twitter digg google delicious technorati stumbleupon myspace wordpress linkedin gmail igoogle windows live tumblr viadeo yahoo buzz yahoo mail yahoo bookmarks favorites email print

Page 1/3 | 1 2 3  | Next Page >

  • Losing internet connectivity on server after installing LogMeIn Hamachi (with server set as gateway node)

    - by Kim Jong-Un
    Our domain controller (SBS 2003) completely lost internet and network connectivity yesterday after I remotely installed LogMeIn Hamachi on it and set it to be a gateway node- in an attempt to create a VPN link between the server and a remote site. I had to go in to the office to resolve the problem as, unsurprisingly, my own remote access to the server was also lost. I was only able to restore network connectivity by deleting a virtual network adapter Hamachi created when making the server the gateway node (called "Hamachi bridge" I believe), then rebooting the server. This is a repeatable problem. Every time I try to get this to work, it just takes the server offline. Why would this bridge affect regular TCP/IP connectivity on the NIC in this way? I have tried a "hub-and-spoke" configuration between the server and our PC at a remote site (server set as hub, remote site as spoke). This caused no such problems with general internet connectivity, and file transfer worked well between the two computers. However, there was a DNS issue with the VPN between the two sites- resulting in Active Directory not being able to communicate between them (could not log on using domain user accounts at remote site if they were not already cached on that machine). I only tried a "gateway" network as LogMeIn support told me: If you can get the Active Directory to work it would only be through a "Gateway" network type with the server acting as the Gateway Node. You would configure the gateway settings on the server in the Hamachi client on that machine to push whatever IP's/DNS settings you prefer and at that point AD would be able (all things being equal) communicate to the client node when it attaches. We do not have any ActiveDirectory configuration info as that's outside the scope of our support. I hope this helps. It would be fantastic if I could get Active Directory to work over a Hamachi VPN connection, without worrying about the server going offline in this way. Does anyone have any ideas how I should proceed, or any theories as to what is going on when I try to use the "gateway" network type? I want to try to narrow down what is going on here.

    Read the article

  • Proper upstart script for hamachi?

    - by ALQ
    I've been looking for a script to supervise hamachi and mostly got it to work except for the part that daemonizes hamachid. The following script works but is not perfect. I'm not familiar with upstart internals to debug this further. description "Hamachi VPN" author "Alexis Le-Quoc <[email protected]>" start on (net-device-up and local-filesystems and runlevel [2345]) stop on runlevel [016] respawn oom never env DAEMON=/opt/logmein-hamachi/bin/hamachid pre-start script [ -x "$DAEMON" ] end script # should really be: # expect daemon # exec $DAEMON exec $DAEMON debug > /dev/null

    Read the article

  • Hamachi network problem in virtual machine

    - by Ngu Soon Hui
    Hello, I have two virtual instances of Windows XP, and they are members of my Hamachi network. The problem is that the virtual machines seem to have a connectivity problem. The connection is intermittent, at best. Is there any known issues of hamachi, with Virtual Machine running on Windows XP?

    Read the article

  • LogMeIn Hamachi for Linux

    - by tlunter
    So far most of my work using LogMeIn Hamachi has been from either a Mac OS X or Windows system to Windows or a Linux Computer. Recently I purchased a mini computer and have been running Ubuntu Server on it, as my little server. I knew LogMeIn had a Linux client that is command line only, but I often do all my work via command line anyway, so that wasn't an issue. I added my user to the correct local file so that I could run the hamachi daemon without sudo, and was able to connect to LogMeIn's service. I decided to set up my Linux server as a git server as well, and set it up correctly. The thing is, the server is behind my schools firewall and I need to use hamachi to get around that. Since most of the time I was using either Mac or Windows, I never had an issue sshing onto any of my computers since LogMeIn is fully featured for these OSs. From Linux (Arch) though, it seems like the client cannot correctly route to the LogMeIn IPs. I know from Windows I can connect to the Linux computers, both of them. From Linux (Arch) though, I can't connect to my Mac, Windows, or Linux server. It keeps just dropping the connection. I was wondering if there was some configuration that I would need to make for this to work. I understand that it is most likely going to be a static configuration since I assume it has to do with the computer not understanding that 5.*.*.* actually refers to another IP:Port. Has anyone had any experience getting this to work?

    Read the article

  • cannot connect to Apache web server through hamachi

    - by Bruce copes
    we are running an apache web server in the office. Hamachi clients are installed on the server and on the other PC's. We can ping and browse each other but cannot view the web server through Hamachi. have disabled the firewalls on the server as well as on the PC's. I have added an apache program exception in the firewall on the server, but surely this is not needed if I disable the firewall? I would be really grateful if someone could help!

    Read the article

  • Replacement for Hamachi for SVN access

    - by Piers
    My company has been using Hamachi to access our SVN repository for a number of years. We are a small yet widely distributed development team with each programmer in a different country working from home. The server is hosted by a non-techie in our central office. Hamachi is useful here since it has a GUI and supports remote management. This system worked well for a while, but recently I have moved to a country with poor internet speeds. Hamachi will no longer connect 99% of the time - instead I get a "Probing..." message that doesn't resolve. It's certain to be a latency issue, as the same laptop will connect without problems when I cross the border and connect using a different ISP with better speeds. So I really need to replace Hamachi with some other VPN/protocol that handles latency better. The techie managing the repository is not comfortable installing and configuring Apache or IIS, so it looks like HTTP is out. I tried to convince my boss to go for a web hosting company, but he doesn't trust a 3rd party with our source. Any other recommended options / experiences out there for accessing our SVN repos that would be as simple as Hamachi for setup; but be more tolerant of network latency issues?

    Read the article

  • Problems with VPN (Hamachi, EasyVPN)

    - by MASARUwota
    Hi. Im having a lot of problems with getting hamachi (and other similar VPN software) to work on my laptop. (Win7 Home Premium 32bit) People can seem to ping me without problems, but trying to ping other people gives me "request timed out". Ive tried everything (disabling firewall, antivirus) but nothing seems to help. How can i fix this?

    Read the article

  • Can remote LogMeIn Hamachi users access our local LAN?

    - by Kev
    Unknown to me, one of the kids has installed LogMeIn Hamachi on his PC so that he can access and play on his pal's Minecraft server, and vice versa. One of the things I did was disable the Client for Microsoft Networks and File and Printer Sharing for Microsoft Networks on the Hamachi NIC in Windows 7's Network Connections. However, my lack of fu when it comes to these types of services is leaving me feeling a little uncomfortable about him using this. Is there anything I should be worried about here? For example, can his friends access our local LAN (which has a number of NAS boxes with unsecured shares) and get up to no good?

    Read the article

  • Using Hamachi VPN to connect to Linux VM at home

    - by Cameron Verotti
    I have a CentOS 5.10 Linux box at home running on VMWare, with Windows 2008 as the host. I have set up a Hamachi VPN so that I can connect to the Host server from work, I attempted to add a second VNIC to the VM and bridged it to the hamachi Network Interface. I spun up the VM and checked eth1 with ifconfig and its throwing me a ipv6 address not a ipv4. I want to hook this VM up so that I can run a ssh command from work to the VM. MY network at home is all on Local 198.168.. hence the need to make a VPN network like Hamachi. I cannot seem to find anything that tells me or helps me with tunneling my Linux VM via Hamachi. Any help would be fantastic!

    Read the article

  • Has anyone got Hamachi 2 working on EC2 Windows instances?

    - by Khash
    I have it running and can see the EC2 instance with a direct tunnel. However, I can't ping the EC2 instance nor can I browse the shared folders. I am sure of the following: - File sharing service is running - Folders are shared I have tried the following: - Turning Windows firewall off - Allowing all TCP and UDP ports and ICMP through Amazon EC2 group policy firewall The instance is a Windows 2008 DataCentre 32-bit.

    Read the article

  • How do I Ban/un-ban users in Hamachi2?

    - by Paige Watson
    I was using Hamachi (v1) and banned a couple of users for a week. During this time, Hamachi auto-updated to Hamachi2, and now I can't find the ban/un-ban function. Any idea where this is and how to un-ban a user? I tried re-installing the Hamachi (v1) client, but when I started it, it auto-updated to v2.

    Read the article

  • Why hamachi time-outs after 5 minutes or so?

    - by Vik89
    I installed hamachi and hamachi-gui on my girlfriend's pc and on my girlfriend's netbook. After 5 minutes or so (even if I keep using it during that time) it loses the connection, I mean I have to 'go offline' and then 'go online' again for it to see my ip again. If I don't and I ping my IP, it says 'Host unreachable'. If I connect with my Mac from the office the problem doesn't exist, so I wouldn't say it is a problem of my hamachi (server) installation, I'm tempted to say it is a problem of my girlfriend's connection, since it happens from her home, and we haven't tried yet to connect from another home with her setup. What would you say? I followed these instructions http://ubuntuforums.org/showthread.php?t=135036

    Read the article

  • cannot access a site from Mac OSX Lion but can from other machines on network?

    - by house9
    SOLVED: The issue is with the hamachi client, hamachi is hi-jacking all of the 5.0.0.0/8 address block http://en.wikipedia.org/wiki/Hamachi_(software)#Criticism http://b.logme.in/2012/11/07/changes-to-hamachi-on-november-19th/ The fix on Mac LogMeIn Hamachi Preferences Settings Advanced Peer Connections IP protocol mode IPv6 only (default is both) If you can only connect to some of your network over IPv4 this 'fix' will NOT work for you ----- A few weeks ago I started using a service - https://semaphoreapp.com I think they made DNS changes a week ago and ever since I cannot access the site from my Mac OSX Lion (10.7.4) machine (my main development machine) but I can access the site from other machines on my network ipad windows machine MacMini (10.6.8) After some google searching I tried both of these dscacheutil -flushcache sudo killall -HUP mDNSResponder but no go, I've contacted semaphoreapp as well, but nothing so far - also of interest, one of my colleagues has the exact same problem, cannot access via Mac OSX Lion but can via windows machine, we work remotely and are not on the same ISP some additional info Lion (10.7.4) cannot access site host semaphoreapp.com semaphoreapp.com has address 5.9.53.16 ping semaphoreapp.com PING semaphoreapp.com (5.9.53.16): 56 data bytes Request timeout for icmp_seq 0 Request timeout for icmp_seq 1 Request timeout for icmp_seq 2 Request timeout for icmp_seq 3 ping: sendto: No route to host Request timeout for icmp_seq 4 ping: sendto: Host is down Request timeout for icmp_seq 5 ping: sendto: Host is down Request timeout for icmp_seq 6 ping: sendto: Host is down Request timeout for icmp_seq 7 .... traceroute semaphoreapp.com traceroute to semaphoreapp.com (5.9.53.16), 64 hops max, 52 byte packets 1 * * * 2 * * * traceroute: sendto: No route to host 3 traceroute: wrote semaphoreapp.com 52 chars, ret=-1 *traceroute: sendto: Host is down traceroute: wrote semaphoreapp.com 52 chars, ret=-1 .... and MacMini (10.6.8) can access it host semaphoreapp.com semaphoreapp.com has address 5.9.53.16 ping semaphoreapp.com PING semaphoreapp.com (5.9.53.16): 56 data bytes 64 bytes from 5.9.53.16: icmp_seq=0 ttl=44 time=191.458 ms 64 bytes from 5.9.53.16: icmp_seq=1 ttl=44 time=202.923 ms 64 bytes from 5.9.53.16: icmp_seq=2 ttl=44 time=180.746 ms 64 bytes from 5.9.53.16: icmp_seq=3 ttl=44 time=200.616 ms 64 bytes from 5.9.53.16: icmp_seq=4 ttl=44 time=178.818 ms .... traceroute semaphoreapp.com traceroute to semaphoreapp.com (5.9.53.16), 64 hops max, 52 byte packets 1 192.168.0.1 (192.168.0.1) 1.677 ms 1.446 ms 1.445 ms 2 * LOCAL ISP 11.957 ms * 3 etc... 10.704 ms 14.183 ms 9.341 ms 4 etc... 32.641 ms 12.147 ms 10.850 ms 5 etc.... 44.205 ms 54.563 ms 36.243 ms 6 vlan139.car1.seattle1.level3.net (4.53.145.165) 50.136 ms 45.873 ms 30.396 ms 7 ae-32-52.ebr2.seattle1.level3.net (4.69.147.182) 31.926 ms 40.507 ms 49.993 ms 8 ae-2-2.ebr2.denver1.level3.net (4.69.132.54) 78.129 ms 59.674 ms 49.905 ms 9 ae-3-3.ebr1.chicago2.level3.net (4.69.132.62) 99.019 ms 82.008 ms 76.074 ms 10 ae-1-100.ebr2.chicago2.level3.net (4.69.132.114) 96.185 ms 75.658 ms 75.662 ms 11 ae-6-6.ebr2.washington12.level3.net (4.69.148.145) 104.322 ms 105.563 ms 118.480 ms 12 ae-5-5.ebr2.washington1.level3.net (4.69.143.221) 93.646 ms 99.423 ms 96.067 ms 13 ae-41-41.ebr2.paris1.level3.net (4.69.137.49) 177.744 ms ae-44-44.ebr2.paris1.level3.net (4.69.137.61) 199.363 ms 198.405 ms 14 ae-47-47.ebr1.frankfurt1.level3.net (4.69.143.141) 176.876 ms ae-45-45.ebr1.frankfurt1.level3.net (4.69.143.133) 170.994 ms ae-46-46.ebr1.frankfurt1.level3.net (4.69.143.137) 177.308 ms 15 ae-61-61.csw1.frankfurt1.level3.net (4.69.140.2) 176.769 ms ae-91-91.csw4.frankfurt1.level3.net (4.69.140.14) 178.676 ms 173.644 ms 16 ae-2-70.edge7.frankfurt1.level3.net (4.69.154.75) 180.407 ms ae-3-80.edge7.frankfurt1.level3.net (4.69.154.139) 174.861 ms 176.578 ms 17 as33891-net.edge7.frankfurt1.level3.net (195.16.162.94) 175.448 ms 185.658 ms 177.081 ms 18 hos-bb1.juniper4.rz16.hetzner.de (213.239.240.202) 188.700 ms 190.332 ms 188.196 ms 19 hos-tr4.ex3k14.rz16.hetzner.de (213.239.233.98) 199.632 ms hos-tr3.ex3k14.rz16.hetzner.de (213.239.233.66) 185.938 ms hos-tr2.ex3k14.rz16.hetzner.de (213.239.230.34) 182.378 ms 20 * * * 21 * * * 22 * * * any ideas? EDIT: adding tcpdump MacMini (which can connect) while running - ping semaphoreapp.com sudo tcpdump -v -i en0 dst semaphoreapp.com Password: tcpdump: listening on en0, link-type EN10MB (Ethernet), capture size 65535 bytes 17:33:03.337165 IP (tos 0x0, ttl 64, id 20153, offset 0, flags [none], proto ICMP (1), length 84, bad cksum 0 (->3129)!) 192.168.0.6 > static.16.53.9.5.clients.your-server.de: ICMP echo request, id 61918, seq 0, length 64 17:33:04.337279 IP (tos 0x0, ttl 64, id 26049, offset 0, flags [none], proto ICMP (1), length 84, bad cksum 0 (->1a21)!) 192.168.0.6 > static.16.53.9.5.clients.your-server.de: ICMP echo request, id 61918, seq 1, length 64 17:33:05.337425 IP (tos 0x0, ttl 64, id 47854, offset 0, flags [none], proto ICMP (1), length 84, bad cksum 0 (->c4f3)!) 192.168.0.6 > static.16.53.9.5.clients.your-server.de: ICMP echo request, id 61918, seq 2, length 64 17:33:06.337548 IP (tos 0x0, ttl 64, id 24772, offset 0, flags [none], proto ICMP (1), length 84, bad cksum 0 (->1f1e)!) 192.168.0.6 > static.16.53.9.5.clients.your-server.de: ICMP echo request, id 61918, seq 3, length 64 17:33:07.337670 IP (tos 0x0, ttl 64, id 8171, offset 0, flags [none], proto ICMP (1), length 84, bad cksum 0 (->5ff7)!) 192.168.0.6 > static.16.53.9.5.clients.your-server.de: ICMP echo request, id 61918, seq 4, length 64 17:33:08.337816 IP (tos 0x0, ttl 64, id 35810, offset 0, flags [none], proto ICMP (1), length 84, bad cksum 0 (->f3ff)!) 192.168.0.6 > static.16.53.9.5.clients.your-server.de: ICMP echo request, id 61918, seq 5, length 64 17:33:09.337948 IP (tos 0x0, ttl 64, id 31120, offset 0, flags [none], proto ICMP (1), length 84, bad cksum 0 (->652)!) 192.168.0.6 > static.16.53.9.5.clients.your-server.de: ICMP echo request, id 61918, seq 6, length 64 ^C 7 packets captured 1047 packets received by filter 0 packets dropped by kernel OSX Lion (cannot connect) while running - ping semaphoreapp.com # wireless ~ $ sudo tcpdump -v -i en1 dst semaphoreapp.com Password: tcpdump: listening on en1, link-type EN10MB (Ethernet), capture size 65535 bytes ^C 0 packets captured 262 packets received by filter 0 packets dropped by kernel and # wired ~ $ sudo tcpdump -v -i en0 dst semaphoreapp.com tcpdump: listening on en0, link-type EN10MB (Ethernet), capture size 65535 bytes ^C 0 packets captured 219 packets received by filter 0 packets dropped by kernel above output after Request timeout for icmp_seq 25 or 30 times from ping. I don't know much about tcpdump, but to me it doesn't seem like the ping requests are leaving my machine?

    Read the article

  • TeamViewer cannot connect

    - by Cetin Sert
    Last week I decided to use TeamViewer VPN to administer software on a server behind a firewall using RemoteDesktop. It was easy to configure to start-up with the system and make VPN available on the other side but now it fails to connect at the step shown below: The remote machine is running Windows Server 2008 R2. Is there a native way to circumvent the external firewall using a server role or feature to make Windows Server do the VPN work? Do people have better / more reliable experiences with other products such as Hamachi? The requirements are as follows: Start at remote system start-up time Make VPN connections to the remote machine possible

    Read the article

  • TeamViewer cannot connect

    - by Cetin Sert
    Last week I decided to use TeamViewer VPN to administer software on a server behind a firewall using RemoteDesktop. It was easy to configure to start-up with the system and make VPN available on the other side but now it fails to connect at the step shown below: The remote machine is running Windows Server 2008 R2. Is there a native way to circumvent the external firewall using a server role or feature to make Windows Server do the VPN work? Do people have better / more reliable experiences with other products such as Hamachi? The requirements are as follows: Start at remote system start-up time Make VPN connections to the remote machine possible

    Read the article

  • VPN service into 192 network

    - by tophersmith116
    I'm thinking about setting up a security testing lab. I work on a switched network, and that just makes for unnecessary headaches when doing testing. I'd like to create a 192 network with a few machines inside for DBs and AppServers etc. I will need a pivot machine that connects to both the outer network and the 192 (for automation purposes). But I'd like to be able to connect into the 192 network with my own machine from the outer network as the "attacking" machine (rather than have dedicated attack machines inside the 192 network). Therefore, I'd like to have the pivot server be a VPN server as well, so that my machine can VPN into the 192 network from the outer network. First off, is this even possible? Can I have a single computer with two NICs where a VPN service allows remote connections into the 192? Secondly, I'd like to have multiple outer clients connect to the VPN. Does anyone have any suggestions? I've used Hamachi well before, but I've also seen some good stuff from OpenVPN.

    Read the article

  • How can I deploy my .NET app to Amazon EC2?

    - by Khash
    I have a .NET Windows service and a .NET Web Application that I would like to deploy to my Amazon EC2 Windows 2008 instances. At this point, all I need to do is to copy the zipped files across to the EC2 box and remote desktop to the EC2 instance and finish the deployment. In order to do this, I have tried LogMeIn Hamachi2 to create a P2P VPN and use RoboCopy to copy the files, however it seems Hamachi doesn't work on Windows EC2. What is your solution for deploying your .NET apps to Windows EC2 instances? I want to avoid running an FTP server on the box just to get my files up on the server and don't have a VPN server (like OpenVPN) running to run a cloud based VPN solution. Perhaps I can find a simple way of using Amazon S3 as a strategy? Any ideas? Suggestions?

    Read the article

  • Hamachi² configuration file... Where is it?

    - by Cinaed666
    I recently installed hamachi² and haguichi on my 10.10 machine. It works, but it loses its connection every few minutes and I have to reconnect. I looked into this, and apparently I need to set the KeepAlive in the configuration file to 100. This shouldn't be a hard task, so I looked for the hamachi directory. I checked the obvious place: /home/username/.hamachi ... but this directory doesn't exist. (Yes, I did enable hidden files.) After doing a file search for hamachi, it returned nothing either. I'm in the dark here, what am I missing?

    Read the article

facebook twitter digg google delicious technorati stumbleupon myspace wordpress linkedin gmail igoogle windows live tumblr viadeo yahoo buzz yahoo mail yahoo bookmarks favorites email print

1 2 3  | Next Page >