Search Results

Search found 268 results on 11 pages for 'headphones'.

Page 1/11 | 1 2 3 4 5 6 7 8 9 10 11  | Next Page >

  • Computer SOMETIMES recognizes when headphones are plugged in.

    - by rcrobot
    Whenever I plug my headphones into my computer's front headphone jack, I get a weird situation. Sometimes, the computer will recognize the headphones and work properly. But other times, the computer will play sound through both the headphones and my monitor's speaker. When this happens, the sound section of the system settings does not list the headphones. I can fix the issue temporarily by wiggling the headphone port, but if it gets wiggled the wrong way again, then the issue returns. My PC's case is a Rosewill Challenger. I have tried multiple headphones and the same issue is there. I suspect that this might be a hardware related issue, but if there is any way to fix it with software, that would be helpful. This is what it looks like when everything is working properly: This happens when I wiggle the headphone port. I can quickly switch between these two by doing so:

    Read the article

  • HP dv7 Beats Audio Subwoofer on while headphones plugged in

    - by msilis
    I have looked for answers to this but have not found anything. People have similar problems but mostly with getting the subwoofer to work at all. I got the subwoofer to work by editing the /etc/modprobe.d/alsa-base.conf file and adding options snd-hda-intel model=ref. When I plug in my headphones, the main speakers turn off but the subwoofer still has sound coming through it. The output is selected automatically in sound preferences and is set to headphones when they are plugged in. I also have tried muting the main speakers, which in turn mutes the subwoofer, before plugging in the headphones as they seem to have two different volume controls, but as soon as the headphones are plugged in, the subwoofer has sound coming out of it. I am running Ubuntu 11.10 64 bit on HP dv7- 4285dx. I am able to just not have the subwoofer on but since I have gotten it to work I would like to keep it around and not have to change a config file every time I want to plug in my headphones. Any ideas or suggestions would be greatly appreciated. Thanks

    Read the article

  • Sound no longer changes when I plug in headphones in Ubuntu 12.04

    - by Victor9098
    In ubuntu 11.10 (I am not 100% about 11.04) when I plugged in my headphones the sound settings would automatically set themselves to my preferred setting (on 100% and then use the dial on the headphones to control). Then when I unplugged them the sound would go back to whatever I had been using previously. Since upgrading to 12.04 this has stopped working. Instead I have to adjust my sound settings after I plug in headphones and remember to turn down before unplugging. Does anybody know how to get this working again or has the feature been removed in 12.04?

    Read the article

  • No sound into headphones

    - by quack1
    I will make it quick : I have no sound in my headphones when they are plugged in on my Asus F200CA running Ubuntu 14.04, but : I have sound in the laptop speakers when the headphones are plugged out. If I boot up my laptop on a Live USB running Ubuntu 14.04, I have sound in the speakers and in the headphones. If I open pavucontrol, I can "see" sound, but I can't hear it. I already did some of the actions listed here. I'm running Ubuntu 14.04, with Unity, and this bug appeared about a week ago.

    Read the article

  • How do I use my headphones and microphone?

    - by Pavan Kumar
    Hello, The headphones and microphone on my Ubuntu 10.10 work fine. But when I start an audio conversation using empathy or pidgin, my computer hangs, the microphone doesn't work, and I can't record anything. I have tried sudo alsa force-reload, I have installed pavucontrol, but nothing works. I can't increase the volume of the headphones and master channel using alsamixer though they are unmuted. (Everything works fine in Fedora and Windows XP.) How do I fix this? Thank you.

    Read the article

  • Headphones don't work on an Acer Aspire 5920g

    - by Dave Chatelain
    All the problems I read about were all about the sound not working when they plugged the headphones in. I have the problem that my mic will work but the sound is still played on my built-in speakers. When I look at the sound settings, it doesn't give me any options for headphones. I run 12.04 and never had this problem in Windows. I run it on a Acer Aspire 5920g. Any tips or ideas will be very helpful.

    Read the article

  • Just installed Ubuntu 12.04 - integrated speakers aren't working but headphones are

    - by Mat Elkan
    I've just installed Ubuntu 12.04 alongside Windows Vista. There were no previous versions of Ubuntu installed. My computer is a Sony Vaio all in one, with integrated sound card and speakers. I can't get any sound coming from the speakers, but if I plug headphones into the jack on the side of the computer and select "headphones" under "sound" in "system settings" I can get sound through them. I have been searching all day trying to find a fix but haven't had any luck. Any advice would be greatly appreciated. Thanks! Mat :-)

    Read the article

  • Strange sound distortion using headphones

    - by Luca
    When I use headphones, the sound comes out distorted. Voices sound as if they were far away, while instruments that should be in the background sound enhanced. When I play songs with the laptop's integrated speakers everything is alright, and the headphones work normally when plugged into another computer. I tried reloading ALSA and reinstalling some of the related packages, but nothing worked. I'm using Xubuntu 12.04 32-bit. Thanks to anyone who will suggest me how to solve this problem.

    Read the article

  • No audio with headphones, but audio works with integrated speakers

    - by Pedro
    My speakers work correctly, but when I plug in my headphones, they don't work. I am running Ubuntu 10.04. My audio card is Realtek ALC259 My laptop model is a HP G62t a10em In another thread someone fixed a similar issue (headphones work, speakers not) folowing this: sudo vi /etc/modprobe.d/alsa-base.conf (or some other editor instead of Vi) Append the following at the end of the file: alias snd-card-0 snd-hda-intel options snd-hda-intel model=auto Reboot but it doesnt work for me. Before making and changes to alsa, this was the output: alsamixer gives me this: Things I did: followed this HowTo but now no hardware seems to be present (before, there were 2 items listed): Now, alsamixer gives me this: alsamixer: relocation error: alsamixer: symbol snd_mixer_get_hctl, version ALSA_0.9 not defined in file libasound.so.2 with link time reference I guess there was and error in the alsa-driver install so I began reinstalling it. cd alsa-driver* //this works fine// sudo ./configure --with-cards=hda-intel --with-kernel=/usr/src/linux-headers-$(uname -r) //this works fine// sudo make //this doesn't work. see ouput error below// sudo make install Final lines of sudo make: hpetimer.c: In function ‘snd_hpet_open’: hpetimer.c:41: warning: implicit declaration of function ‘hpet_register’ hpetimer.c:44: warning: implicit declaration of function ‘hpet_control’ hpetimer.c:44: error: expected expression before ‘unsigned’ hpetimer.c: In function ‘snd_hpet_close’: hpetimer.c:51: warning: implicit declaration of function ‘hpet_unregister’ hpetimer.c:52: error: invalid use of undefined type ‘struct hpet_task’ hpetimer.c: In function ‘hpetimer_init’: hpetimer.c:88: error: ‘EINVAL’ undeclared (first use in this function) hpetimer.c:99: error: invalid use of undefined type ‘struct hpet_task’ hpetimer.c:100: error: invalid use of undefined type ‘struct hpet_task’ hpetimer.c: At top level: hpetimer.c:121: warning: excess elements in struct initializer hpetimer.c:121: warning: (near initialization for ‘__param_frequency’) hpetimer.c:121: warning: excess elements in struct initializer hpetimer.c:121: warning: (near initialization for ‘__param_frequency’) hpetimer.c:121: warning: excess elements in struct initializer hpetimer.c:121: warning: (near initialization for ‘__param_frequency’) hpetimer.c:121: warning: excess elements in struct initializer hpetimer.c:121: warning: (near initialization for ‘__param_frequency’) hpetimer.c:121: error: extra brace group at end of initializer hpetimer.c:121: error: (near initialization for ‘__param_frequency’) hpetimer.c:121: warning: excess elements in struct initializer hpetimer.c:121: warning: (near initialization for ‘__param_frequency’) make[1]: *** [hpetimer.o] Error 1 make[1]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.9/acore' make: *** [compile] Error 1 And then sudo make install gives me: rm -f /lib/modules/0.0.0/misc/snd*.*o /lib/modules/0.0.0/misc/persist.o /lib/modules/0.0.0/misc/isapnp.o make[1]: Entering directory `/usr/src/alsa/alsa-driver-1.0.9/acore' mkdir -p /lib/modules/0.0.0/misc cp snd-hpet.o snd-page-alloc.o snd-pcm.o snd-timer.o snd.o /lib/modules/0.0.0/misc cp: cannot stat `snd-hpet.o': No such file or directory cp: cannot stat `snd-page-alloc.o': No such file or directory cp: cannot stat `snd-pcm.o': No such file or directory cp: cannot stat `snd-timer.o': No such file or directory cp: cannot stat `snd.o': No such file or directory make[1]: *** [_modinst__] Error 1 make[1]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.9/acore' make: *** [install-modules] Error 1 [SOLUTION] After screwing it all up, someone mentioned why not trying using the packages in Synaptic - so I did. I have reinstalled the following packages and rebooter: -alsa-hda-realtek-ignore-sku-dkms -alsa-modules-2.6.32-25-generic -alsa-source -alsa-utils -linux-backports-modules-alsa-lucid-generic -linux-backports-modules-alsa-lucid-generic-pae -linux-sound-base -(i think i listed them all) After rebooting, the audio worked, both in speakers and headphones. I have no idea which is the package that made my audio work, but it certainly was one of them. [/SOLUTION]

    Read the article

  • Will these headphones work with Ubuntu?

    - by david99world
    Sorry for the vagueness of this question, but I just wondered if (shot in the dark) anyone knew if these wireless headphones... http://www.argos.co.uk/static/Product/partNumber/9004203.htm#pdpFullProductInformation Would work with ubuntu? I was thinking if the trasnmitter is USB then I might not get the drivers. Does anyone have any ideas of a way I could find out without paying for them then finding out I cant use them? Thanks, Dave

    Read the article

  • Music but no voices on headphones

    - by TheEmeritus
    I have a laptop with Windows 7 and I have headphones for a couple of months, and only recently they started to play only the music, while the voices are there, but just very faint. I tried to connect them to another computer (PC, windows XP) and they worked fine, which made me think the problem isn't with the headphones but with the laptop. I've searched online and found a few solutions, none of the seemed to work. Such as: plugging in and out my jack until you can hear better, checking the headphones on other computers. Other relevant info: The headphones come with a mic if I right click the sound icon - sound devices. Then I dont see any 'headphones', not even if I tell it to show disabled devices. All I see is a 'speakers' icon, yet it's there even if the headphones are disconnected, and is always active. So if anyone has any idea I'd appreciate it :) Thanks!

    Read the article

  • Sound plays from laptop speakers only even when headphones are connected

    - by Ankush N Nayak
    I'm using a Dell Vostro 1014 laptop with Ubuntu 11.10. From the time I had Ubuntu 9.04, sound comes from the laptop speakers only even when I plug in earphones or external speakers. Also, if an external microphone plugged in, it does not work. Dell even replaced my motherboard to check for hardware issues but the problem persists. So it is definitely not a hardware issue. The sound plays perfectly through the headphones in the pre-boot diagnostics. So I figure, this must be a problem with Ubuntu not recognizing my sound card. Please try to give a solution for this problem.

    Read the article

  • No sound from internal speaker but headphones OK

    - by Aris Boch
    The problem: The system won't play sound on the internal speaker of the laptop, but only on the headphone. When I put the headphone jack half in and fiddle around with it, then it'll play even on the internal speakers (the system apparently believes, that the headphone are in). What should I do? The technical data: Laptop modell Medion Erazer X6815 matatabisama@matatabisama-X6815:~/Downloads$ sudo aplay -l | egrep ^card card 0: PCH [HDA Intel PCH], device 0: ALC269VB Analog [ALC269VB Analog] card 0: PCH [HDA Intel PCH], device 1: ALC269VB Digital [ALC269VB Digital] card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Ubuntu 12.04 64 matatabisama@matatabisama-X6815:~/Downloads$ uname -a Linux matatabisama-X6815 3.2.0-30-generic #48-Ubuntu SMP Fri Aug 24 16:52:48 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux

    Read the article

  • No sound for headphones

    - by Joel Lino
    I was trying some of the solutions published in this forum for the same problem, but just one in particular work for me: add the line of code in the file alsa-base.conf. This just works for a few days, now the problem is back again. Any solution to fix this problem for good? Compaq Presario CQ40 $ lspci | grep -i audio 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) 01:05.1 Audio device: ATI Technologies Inc RS780 Azalia controller

    Read the article

  • How to automatically change volume level when un-/plugging headphones?

    - by htorque
    What I want is the following: When I plug in my headphones, I want the sound to be un-muted and set to a specific volume level. When I unplug my headphones, I want the sound to be muted (or set to a specific volume level). Setting the volume levels isn't the problem, but I somehow need to do this when un-/plugging the headphones, so I'm looking for a way to get notified of those events. I quickly found /proc/asound/card0/codec#0 to indicate whether headphones are plugged in or not, so I tried to monitor it using inotifywait and change the volume level based on modified notifications. Unfortunately inotifywait failed because proc isn't an ordinary filesystem. Are there other ways to do this (maybe via PulseAudio)? Audio device: Intel HDA, audio codec: Conexant CX20585.

    Read the article

  • Logitech USB headphones detected and selected in Debian Squeeze but sound still coming from speakers

    - by mattalexx
    I have a pair of Logitech wireless USB headphones that work with Ubuntu Natty but aren't working in Debian Squeeze. When they are selected as the default audio output, the sound comes out of the speakers instead of the headphones. I have rebooted and tried using a different USB port. My computer is a Thinkpad T510. How can I fix this problem? Here is lsusb: Bus 002 Device 005: ID 046d:0a29 Logitech, Inc. Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 005: ID 046d:c52f Logitech, Inc. Wireless Mouse M305 Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Here is cat /proc/asound/cards 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0xf2420000 irq 17 1 [Headset ]: USB-Audio - Logitech Wireless Headset Logitech Logitech Wireless Headset at usb-0000:00:1d.0-1.1, full speed 2 [NVidia ]: HDA-Intel - HDA NVidia HDA NVidia at 0xcdefc000 irq 17 Here is the gnome-volume-control GUI: Here's lsmod | grep usb: snd_usb_audio 50670 0 snd_usb_lib 11192 1 snd_usb_audio usbhid 28008 0 hid 50909 1 usbhid snd_rawmidi 12513 2 snd_usb_lib,snd_seq_midi snd_hwdep 4054 2 snd_usb_audio,snd_hda_codec snd_pcm 47226 3 snd_usb_audio,snd_hda_intel,snd_hda_codec usbcore 98969 5 snd_usb_audio,snd_usb_lib,usbhid,ehci_hcd snd 34423 11 snd_usb_audio,snd_rawmidi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device nls_base 4541 1 usbcore Here's cat /etc/modprobe.d/alsa-base.conf: # autoloader aliases install sound-slot-0 /sbin/modprobe snd-card-0 install sound-slot-1 /sbin/modprobe snd-card-1 install sound-slot-2 /sbin/modprobe snd-card-2 install sound-slot-3 /sbin/modprobe snd-card-3 install sound-slot-4 /sbin/modprobe snd-card-4 install sound-slot-5 /sbin/modprobe snd-card-5 install sound-slot-6 /sbin/modprobe snd-card-6 install sound-slot-7 /sbin/modprobe snd-card-7 # Cause optional modules to be loaded above generic modules install snd /sbin/modprobe --ignore-install snd && { /sbin/modprobe --quiet snd-ioctl32 ; /sbin/modprobe --quiet snd-seq ; } install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi && { /sbin/modprobe --quiet snd-seq-midi ; : ; } install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 && { /sbin/modprobe --quiet snd-emu10k1-synth ; : ; } # Prevent abnormal drivers from grabbing index 0 options bt87x index=-2 options cx88_alsa index=-2 options snd-atiixp-modem index=-2 options snd-intel8x0m index=-2 options snd-via82xx-modem index=-2 # Keep snd-pcsp from beeing loaded as first soundcard options snd-pcsp index=-2 # Keep snd-usb-audio from beeing loaded as first soundcard options snd-usb-audio index=-2 EDIT In VLC, I reset VLC prefs (Output: Default) and sound still comes out of speakers as expected. Then I change it to "Output: ALSA Audio output" and a Device menu appears. I select the headphones. When I then save the prefs, the audio switch to the headphones! But here's what's weird: I go back to prefs, change it to "Output: Default" and the headphones keep working. Maybe the ALSA option is actually what is being chosen as the "Default" option, but the Device menu (whose selection is still being used) is still set to the headphones. Anyway, now I need to figure out how to make it work as the default for the whole system.

    Read the article

  • Static noise in headphones

    - by John Murdoch
    I have a Asus P6T based system. I was using the on-board sound (plugging in Logitech X-230 2.1 analog speakers in the green "front speakers" 3.5mm analog output, then plugging in my headphones in that). I was quite happy with the sound quality (didn't hear any static noise if volume was turned down to my normal listening level). Then about a week ago I started having terrible static noise from the left channel, and no normal audio on that left channel. Right channel had more static noise than usual but did have a bit of sound. I tried using the AC'97 in front of my case but that seemed to have no signal. I decided my on-board sound card has gone bad and bought an internal sound card to replace it (Startech 7.1Ch PCI). This fixed the "no sound from left channel problem", but I had much more audible static noise. I decided the card was low quality and/or it had interference from all the other things happening inside the computer case, and bought a Sweex SC016 external USB sound card. But even with that I have static noise in headphones. Positioning the USB sound card differently doesn't seem to help. Trying the other analog outputs (e.g., surround) doesn't help. The static noise in all cases is proportional to the volume. I have tried different headphones, but the situation is situation though perhaps the flavour of the static noise changes slightly. So what are my options? a) Get another, more expensive, external USB sound card hoping the quality will improve? b) Get another, more expensive, internal sound card (PCIe 1x perhaps) hoping the quality will improve? c) Get a dedicated DAC box? d) Get some Hi-Fi earphones? Suggestions? tl;dr - Two different sound cards both still have static noise in headphones.

    Read the article

  • Sound quality in bluetooth headphones doesn't change to high

    - by Sergiy Byelozyorov
    My Bluetooth headset Philips SHB6610 has several profiles. It can work as low-quality headset (HFP) and high-quality headphones (A2DP). I mean sound quality. Typically whenever I start to play the music in my media player it works in high quality, while if I receive a call on Skype it switches to low-quality. Once call is finished it falls back on high quality again. However, from time to time, it happens that I connect headphones to the computer and they just stay in low-quality mode. I don't know how can I change the profile manually, since it was always done automatically so far. The only thing that helps (but not always) is re-pairing of headphones with PC. I am using Windows 7 on Toshiba Satellite Pro P300-1CG laptop, with Belkin Mini Bluetooth Adapter.

    Read the article

  • Music but no voice on headphones

    - by TFD
    I have normal stereo headphones which work fine On a specific PC running Windows 7 the external speaker and USB speakers work fine too But when I plug in the headphones, all I hear is muffled music, no voice track? It sounds like it is being split into 5.1, and I am getting just the L & R components, and not the centre voice channel? In the Playback devices (sound) control panel, I can adjust stereo or 5.1 for external speakers or USB speakers, but not for the headphones. The config button is grey out for them Is this the problem, if so how do I fix it?

    Read the article

  • Sound feels to come from far in my headphones [closed]

    - by Rakesh
    I bought new headphones just yesterday. The strange thing is when I hear sound from my headphone I feel like it is coming from far away. Main problem comes in games, when I hear the footsteps of enemies and think he is on the other side of the wall while he is near to me. :D I also heard virtual haircut on youtube . I tried this with my new headphones and HTC desire S earphones. In case of HTC earphones I felt that scissors and electric razor( @ 3:04 ) is too much near to my ear but in case of the headphones I didn't felt such thing. I felt electric razor is almost 6 inches away from my ear. Have you ever encountered such problem? What can I do in this case?

    Read the article

  • Ubuntu 9.1 - Audio coming from both speakers and headphones

    - by David
    I have an HP Compaq nc8230 that has an annoying little problem with it's audio devices in Ubuntu 9.1. When I have the headphones plugged in, the audio continues to play simultaneously through the speakers no matter what. I'm not sure what kind of sound card this computer has, but in WIndows XP, Vista, 7 and OSx86 I didn't have this problem. I've tried using 3 different headphones and it didn't change anything. Please help.

    Read the article

  • Pairing Sony bluetooth headphones with my PC, under Windows 7

    - by jonathanconway
    Hi there, I have the Sony DR-BT50 wireless headphones. I've been able to successfully pair them to my iPhone and play music through them, but no such luck with my PC. I can add it to the bluetooth devices, but when the "Driver Software Installation" screen comes up, I get a red X and "No driver found". Any ideas how to fix this? (I have a bluetooth keyboard & mouse paired successfully, so it's not a problem with my laptop's bluetooth.)

    Read the article

  • Pairing Sony bluetooth headphones with my laptop

    - by jonathanconway
    Hi there, I have the Sony DR-BT50 wireless headphones. I've been able to successfully pair them to my iPhone and play music through them, but no such luck with my PC. I can add it to the bluetooth devices, but when the "Driver Software Installation" screen comes up, I get a red X and "No driver found". Any ideas how to fix this? (I have a bluetooth keyboard & mouse paired successfully, so it's not a problem with my laptop's bluetooth.)

    Read the article

  • Are Noise-Canceling headphones effective?

    - by cornjuliox
    I work in a pretty noisy environment, lots of noise near me like the TV and people yelling and talking in really loud voices. It makes it really hard to concentrate and since I can't really move my PC to another part of the house I was thinking of getting a decent pair of noise-canceling headphones. I've never owned or used a pair before so I wanted to ask, do they block outside noise completely? As in, I'll hear nothing but silence as long as I'm wearing them?

    Read the article

  • Headphones stopped working in Windows (working fine in other OS)

    - by arnab321
    All of a sudden, my headphones stopped working with windows 8 in my laptop. Sound plays fine through built in speakers. Its not a problem with the hardware, because, I dual boot ubuntu and sound plays fine in Ubuntu. These are the things I have tried: - Restarting and blah blah. Restarted 20 times i think, alternating windows and ubuntu. - Uninstalled and reinstalled Realtek drivers. - Troubleshooting from control panel (it says "coudnt identify problem") What might be the problem?

    Read the article

1 2 3 4 5 6 7 8 9 10 11  | Next Page >