Search Results

Search found 20 results on 1 pages for 'hina nms'.

Page 1/1 | 1 

• ActiveMq NMS Disconnects after about 30 seconds

  - by Kelly

  'm trying to do simple pub/sub with ActiveMq. I can get it all working fine, but the subscriber disconnects after about 30 seconds. I've looked for a timeout type of value I can change but nothing seems to be working. Here is the subscriber: using System; using Apache.NMS; using Apache.NMS.ActiveMQ; using Apache.NMS.ActiveMQ.Commands; namespace ActiveMQCatcher { internal class Program { private static void Main(string[] args) { IConnectionFactory factory = new ConnectionFactory("tcp://localhost:61616/"); using (IConnection connection = factory.CreateConnection()) { connection.ClientId = "MYID"; connection.Start(); using (ISession session = connection.CreateSession()) { IMessageConsumer consumer = session.CreateConsumer(new ActiveMQTopic("MYTOPIC"), null, false); consumer.Listener += consumer_Listener; Console.ReadLine(); } connection.Stop(); } } private static void consumer_Listener(IMessage message) { Console.WriteLine("Got: " + ((ITextMessage) message).Text); } } } I tried this: connection.RequestTimeout = TimeSpan.MaxValue; But it didn't seem to change anything. To get the problem just run the program and sit waiting for about 30 seconds. You can see the connection disappear in the ActiveMQ Console (http://localhost:8161/admin/connections.jsp by default) Any ideas?

  Read the article

• RiverMuse Brings Your Legacy NMS Into the Present

  With a distinguished pedigree and an open source foundation, RiverMuse is looking to bring your legacy NMS into the 21st century with advanced reporting and sophisticated alerts.

  Read the article

• Bacula virtual backup job doesn't run, no output?

  - by Zoredache

  I am trying to get Virtual Backups working, but when I try to run a virtual backup job, it appears to get created, but then never seems to actually run. I have a full, and a couple incremental backups. status director JobId Level Files Bytes Status Finished Name ==================================================================== 1283 Full 10,565 1.963 G OK 21-Dec-12 09:47 nms-Job 1284 Incr 314 129.6 M OK 21-Dec-12 09:49 nms-Job 1285 Incr 230 147.2 M OK 21-Dec-12 09:51 nms-Job 1288 Incr 525 138.8 M OK 21-Dec-12 11:25 nms-Job I attempt to start a job from bconsole like this. *run job=nms-Job level=VirtualFull Using Catalog "MySQL" Run Backup job JobName: nms-Job Level: VirtualFull Client: nms-FileDaemon FileSet: nms-FileSet Pool: nms-pool (From Job resource) Storage: File_d1 (From Pool resource) When: 2012-12-21 13:07:54 Priority: 10 OK to run? (yes/mod/no): Job queued. JobId=1291 Then my new job, just sits there, doing nothing. The JobStatus shows that the job was created, but it appears to never run? All the full, and incremental backups are terminating normally. *llist jobid=1291 JobId: 1,291 Job: nms-Job.2012-12-21_13.07.56_07 Name: nms-Job PurgedFiles: 0 Type: B Level: F ClientId: 4 Name: nms-FileDaemon JobStatus: C SchedTime: 2012-12-21 13:07:54 StartTime: 2012-12-21 13:07:56 EndTime: 0000-00-00 00:00:00 RealEndTime: 0000-00-00 00:00:00 JobTDate: 1,356,124,076 VolSessionId: 0 VolSessionTime: 0 JobFiles: 0 JobErrors: 0 JobMissingFiles: 0 PoolId: 19 PooLname: nms-pool PriorJobId: 0 FileSetId: 11 FileSet: nms-FileSet I am getting very frustrated, that this isn't working, mostly because it isn't giving me any error logs, or output at all. I submit the job, and as far as I can tell nothing happens. Is there some status, or debugging level that I can set to get a useful information about why this isn't working? What can I do to make this work? I was originally running Bacula 5.0.2 on Debian Squeeze, out of frustration, I upgraded to the 5.2.6 in the backports repository, hoping that a new version might give me better results.

  Read the article

• Which network management system (NMS) to choose?

  - by QrystaL

  I need to integrate NMS in large enterprise system for data collection purposes. Primary requirements: collection by SNMP great scalability (up to 1,000 devices with 1,000 interfaces each) failover data storage in Oracle DBMS integration API (configuration, data access) Any ideas would be appreciated...

  Read the article

• Nagios - Custom Report Generation

  - by Naveen

  Hi, I want to generate a custom report in "Nagios-3.2.0". I have defined the work-hours in "timeperiods.cfg" as follows: 'workhours' timeperiod definition define timeperiod { timeperiod_name 0800-2000 alias full time monday 08:00-20:00 tuesday 08:00-20:00 wednesday 08:00-20:00 thursday 08:00-20:00 friday 08:00-20:00 saturday 08:00-20:00 } Now, if I replace "saturday" with "2010-03-27" or "march 27" as shown below: 'workhours' timeperiod definition define timeperiod { timeperiod_name 0800-2000 alias full time monday 08:00-20:00 tuesday 08:00-20:00 wednesday 08:00-20:00 thursday 08:00-20:00 friday 08:00-20:00 2010-03-27 08:00-20:00 } Nagios is not generating report for the given date (2010-03-27). How can I modify "timeperiods.cfg" so that I can generate reports for the given dates ?

  Read the article

• Use of DTLS (Datagram Transport Layer Security) with SNMP and Management Systems

  - by Doug

  Does anyone know if the current crop of SNMP based commercial and open source network management systems (eg, HP OpeenView/NNM, OpenNMS) support the use of SNMP over DTLS (http://tools.ietf.org/html/rfc4347)? Thanks in advance...

  Read the article

• snmpd dead but subsys locked

  - by Hina NMS

  Hi folks I have an NMS and a Client machine. I want the client to send traps to the NMS. I have been configuring the snmpd.conf file testing if i disable a process do i receive an alert or not. For the changes to reflect that were made in the conf file i restarted the snmpd daemon each time. The testing was going fine. All of a sudden when i restarted snmpd i recieved the error msg "snmpd dead but subsys locked". I googled for answer as to what it actually meant and found out that when a service is started a logfile is created in the /var/lock/subsys. Sometimes if the service is not stopped properly or whatever the logfile remains created. Though i started/stopped the snmpd service properly it didnt go away so i removed the file manually (via rm cmd). when i checked the status the error "snmpd dead but subsys locked" was gone. On my NMS i recieved the alert of snmpd coldstart. i started the snmpd service everything goes fine! BUT after 5 mins again i recieve the same error message and this keeps on happening..what do i need to do now?

  Read the article

• SNMPD running but not listening for connections at random

  - by Lukasz

  OS: CentOS release 5.7 (Final) Net-SNMP: net-snmp-5.3.2.2-14.el5_7.1 (from RPM) Periodically my NMS notifies me that SNMP has gone down on this machine. The service is restored in between 10 to 30 minutes. My NMS also pings and check SSH and those services are not affected during the SNMP outage. SNMPD log file shows that it is working and apparently receiving packets (either from local agents from 127.0.0.1 or from my NMS at 172.16.37.37) however attempting to snmpwalk locally or from the NMS system fails with a timeout. I have 7 of these servers running mixture of CentOS 5.7 and RHEL 5.7 with this specific version of Net-SNMP installed from RPM - none of them have this issue except this one. 5 of the machines (including the NMS system and this problem server) are in the same rack connected using one switch. Restarting SNMPD does not fix the issue - it clears up by itself eventually. Any suggestions where I can begin diagnosing the issue? It's a closed subnet so IPTables is not used. SNMPD config below: # Following entries were added by HP Insight Management Agents at # Tue May 15 10:58:17 CLT 2012 dlmod cmaX /usr/lib64/libcmaX64.so rwcommunity public 127.0.0.1 rocommunity public 127.0.0.1 rwcommunity 3adRabRu 172.16.37.37 rocommunity 3adRabRu 172.16.37.37 rwcommunity 3adRabRu 172.16.37.36 rocommunity 3adRabRu 172.16.37.36 trapcommunity callmetraps trapsink 172.16.37.37 callmetraps trapsink 172.16.37.36 callmetraps syscontact Lukasz Piwowarek syslocation Santiago, Chile # ---------------------- END -------------------- agentAddress udp:161 com2sec rwlocal default public com2sec rolocal default public com2sec subnet default 3adRabRu group rwv2c v2c rwlocal group rov2c v2c rolocal group rov2c v2c subnet view all included .1 access rwv2c "" any noauth exact all all none access rov2c "" any noauth exact all none none

  Read the article

• Unreceived SNMP traps

  - by Stephen Murby

  I have 2 CISCO IE3000 and 2 IE3010 switches. They are each configured to send traps to the one host which hosts my NMS [ManageEngine]. The only traps I have enabled on the switches are authentication and linkStatus messages (Up/Down), currently I have my NMS polling with the right community and receiving as ManageEngine checks when adding a managed device, but no linkStatus traps are received. I know they are coming because I have capture them with wireshark, but they are not received by my NMS, any ideas?

  Read the article

• Simulate SNMP traps to test surveillance

  - by jishi

  I'm trying to use Net-SNMP on Windows to emulate a trap that should trigger an alarm on our surveillance system. This is the setup: Windows 7 client that sends the trap Net-SNMP as software for sending the trap Linux with Adventnet ManageEngine OpManager as NMS (not relevant) This is what I'm trying to accomplish send trap with OID .1.3.6.1.4.1.5089.1.0.1 (according to the MIB I have loaded into my NMS) and just some sort of message into it to see if I can get any alarm in my NMS. I can see that I actually send a trap in my firewall, but I have no idea what it contains. This is my attempt so far: snmptrap.exe -v 2c -c xxxxxxx 192.168.100.65 '' 6 0 .1.3.6.1.4.1.5089.1.0.1 s "123456" However, I can't seem to find any reasonable documentation with examples for snmptrap. Basically, I need to know what: '' <- why do I need this? I can omit it and it will still send a trap 6 <- Enterprise gneric trap, I assume. Is this correct? 0 <- I have no idea, I need some sort of value for this .1.3.6.1.4.1.5089.1.0.1 <- the enterprise specific OID I assume, should this be followed by some more numbers s <- indicates string "123456" <- just a random test-string... This doesn't make much sense to me, and if anyone can shed some light on this I would be very grateful.

  Read the article

• need help to solve the sql error.

  - by hina

  i want to send SMS using SQL server 2008 express, and using the video tutorial for help. i found an error while testing, i.e. ERROR: Microsoft SQL native client: communication link failure. kindly tell me how to resolve this error. i used the SQL command: "sqlcmd -S np:\127.0.0.1\pipe\MSSQL$SQLEXPRESS\sql\qurey"

  Read the article

• request response with activemq - always send double response.

  - by Chris Valley

  Hi, I'm new at activeMq. I tried to create a simple request response like this. public Listener(string destination) { // set factory ConnectionFactory factory = new ConnectionFactory(URL); IConnection connection; try { connection = factory.CreateConnection(); connection.Start(); ISession session = connection.CreateSession(); // create consumer for designated destination IMessageConsumer consumer = session.CreateConsumer(new Apache.NMS.ActiveMQ.Commands.ActiveMQQueue(destination)); consumer.Listener += new MessageListener(consumer_Listener); Console.ReadLine(); } catch (Exception ex) { Console.WriteLine(ex.ToString()); throw new Exception("Exception in Listening ", ex); } } The OnMessage static void consumer_Listener(IMessage message) { IConnectionFactory factory = new ConnectionFactory("tcp://localhost:61616/"); using (IConnection connection = factory.CreateConnection()) { //Create the Session using (ISession session = connection.CreateSession()) { //Create the Producer for the topic/queue // IMessageProducer prod = session.CreateProducer(new Apache.NMS.ActiveMQ.Commands.ActiveMQTempQueue(message.NMSDestination)); IMessageProducer producer = session.CreateProducer(message.NMSDestination); // Create Response // IMessage response = session.CreateMessage(); ITextMessage response = producer.CreateTextMessage("Replied from VS2010 Test"); //response.NMSReplyTo = new Apache.NMS.ActiveMQ.Commands.ActiveMQQueue("testQ1"); response.NMSCorrelationID = message.NMSCorrelationID; if (message.NMSReplyTo != null) { producer.Send(message.NMSReplyTo, response); Console.WriteLine("Receive: " + ((ITextMessage)message).NMSCorrelationID); Console.WriteLine("Received from : " + message.NMSDestination.ToString()); Console.WriteLine("----------------------------------------------------"); } } } } Every time i tried to send a request to the listener, the response always send repeatedly. The first response will have NMSReplyTo properties while the other not. My workaround to stop this situation by cheking the NMSReplyTo properties if (message.NMSReplyTo != null) { producer.Send(message.NMSReplyTo, response); Console.WriteLine("Receive: " + ((ITextMessage)message).NMSCorrelationID); Console.WriteLine("Received from : " + message.NMSDestination.ToString()); Console.WriteLine("----------------------------------------------------"); } In my understanding, this happened because there was a circular send response in the listener to the same Queue. Could you guys help me how to fix this? Many Thanks, Chris

  Read the article

• Mostly offsite asset management (laptops/smartphones) - what is a good SaaS based solution?

  - by Jack T

  Most of our company assets are offsite. Everyone either works at home or onsite at a customer. Most asset management/audit/remote control software concentrate on company LAN based assets. We don't need an NMS as we use OpenNMS in the internal network. I was thinking of something like Altiris Client Management Suite but since everything is connected to the internet a SaaS based solution sounds like the ways to go. LogMeIn Central looks ok but not that comprehensive. What do you guys use?

  Read the article

• CodePlex Daily Summary for Thursday, February 10, 2011

  CodePlex Daily Summary for Thursday, February 10, 2011Popular ReleasesSnoop, the WPF Spy Utility: Snoop 2.6.1: This release is a bug fixing release. Most importantly, issues have been seen around WPF 4.0 applications not always showing up in the app chooser. Hopefully, they are fixed now. I thought this issue warranted a minor release since more and more people are going WPF 4.0 and I don't want anyone to have any problems. Dan Hanan also contributes again with several usability features. Thanks Dan! Happy Snooping! Work Item Description 5149 Dan Hanan: You can now use the mouse wheel t...RIBA - Rich Internet Business Application for Silverlight: Preview of MVVM Framework Source + Tutorials: This is a first public release of the MVVM Framework which is part of the final RIBA application. The complete RIBA example LOB application has yet to be published. Further Documentation on the MVVM part can be found on the Blog, http://www.SilverlightBlog.Net and in the downloadable source ( mvvm/doc/ ). Please post all issues and suggestions in the issue tracker.SharePoint Learning Kit: 1.5: SharePoint Learning Kit 1.5 has the following new functionality: *Support for SharePoint 2010 *E-Learning Actions can be localised *Two New Document Library Edit Options *Automatically add the Assignment List Web Part to the Web Part Gallery *Various Bug Fixes for the Drop Box There are 2 downloads for this release SLK-1.5-2010.zip for SharePoint 2010 SLK-1.5-2007.zip for SharePoint 2007 (WSS3 & MOSS 2007)Facebook C# SDK: 5.0.3 (BETA): This is fourth BETA release of the version 5 branch of the Facebook C# SDK. Remember this is a BETA build. Some things may change or not work exactly as planned. We are absolutely looking for feedback on this release to help us improve the final 5.X.X release. For more information about this release see the following blog posts: Facebook C# SDK - Writing your first Facebook Application Facebook C# SDK v5 Beta Internals Facebook C# SDK V5.0.0 (BETA) Released We have spend time trying ...NodeXL: Network Overview, Discovery and Exploration for Excel: NodeXL Excel Template, version 1.0.1.161: The NodeXL Excel template displays a network graph using edge and vertex lists stored in an Excel 2007 or Excel 2010 workbook. What's NewThis release adds a new Twitter List network importer, makes some minor feature improvements, and fixes a few bugs. See the Complete NodeXL Release History for details. Installation StepsFollow these steps to install and use the template: Download the Zip file. Unzip it into any folder. Use WinZip or a similar program, or just right-click the Zip file...WatchersNET.TagCloud: WatchersNET.TagCloud 01.09.03: Whats NewAdded New Skin TagTastic http://www.watchersnet.de/Portals/0/screenshots/dnn/TagCloud-TagTastic-Skin.jpg Added New Skin RoundedButton http://www.watchersnet.de/Portals/0/screenshots/dnn/TagCloud-RoundedButton-Skin.jpg changes Tag Count fixed on Tag Source Referrals Fixed Tag Count when multiple Tag Sources are usedFinestra Virtual Desktops: 1.1: This release adds a few more performance and graphical enhancements to 1.0. Switching desktops is now about as fast as you can blink. Desktop switching optimizations New welcome wizard for Vista/7 Fixed a few minor bugs Added a few more options to the options dialog (including ability to disable the taskbar switching)WCF Data Services Toolkit: WCF Data Services Toolkit: The source code and binary releases of the WCF Data Services Toolkit. For simplicity, the source code download doesn't include any of the MSTest files. If you want those, you can pull the code down via MercurialyoutubeFisher: youtubeFisher 3.0 [beta]: What's new: Video capturing improved Supports YouTube's new layout (january 2011) Internal refactoringNearforums - ASP.NET MVC forum engine: Nearforums v5.0: Version 5.0 of the ASP.NET MVC Forum Engine, containing the following improvements: .NET 4.0 as target framework using ASP.NET MVC 3. All views migrated to Razor for cleaner markup. Alternate template (Layout file) for mobile devices 4 Bug Fixes since Version 4.1 Visit the project Roadmap for more details.fuv: 1.0 release, codename Chopper Joe: features: search/replace :o to open file :s to save file :q to quitASP.NET MVC Project Awesome, jQuery Ajax helpers (controls): 1.7: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager html generation optimized new features for the lookup (add additional search data ) live demo went aeroEnhSim: EnhSim 2.3.6 BETA: 2.3.6 BETAThis release supports WoW patch 4.06 at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 Changes since 2.3.0 ...TestApi - a library of Test APIs: TestApi v0.6: TestApi v0.6 comes with the following changes: TestApi code development has been moved to Codeplex: Moved TestApi soluton to VS 2010; Moved all source code to Codeplex. All development work is done there now. Fault Injection API: Integrated the unmanaged FaultInjectionEngine.dll COM component in the build; Cleaned up FaultInjectionEngine.dll to build at warning level 4; Implemented “FaultScope” which allows for in-process fault injection; Added automation scripts & sample program; ...AutoLoL: AutoLoL v1.5.5: AutoChat now allows up to 6 items. Items with nr. 7-0 will be removed! News page url's are now opened in the default browser Added a context menu to the system tray icon (thanks to Alex Banagos) AutoChat now allows configuring the Chat Keys and the Modifier Key The recent files list now supports compact and full mode Fix: Swapped mouse buttons are now properly detected Fix: Sometimes the Play button was pressed while still greyed out Champion: Karma Note: You can also run the u...mojoPortal: 2.3.6.2: see release notes on mojoportal.com http://www.mojoportal.com/mojoportal-2362-released.aspx Note that we have separate deployment packages for .NET 3.5 and .NET 4.0 The deployment package downloads on this page are pre-compiled and ready for production deployment, they contain no C# source code. To download the source code see the Source Code Tab I recommend getting the latest source code using TortoiseHG, you can get the source code corresponding to this release here.ReSharper Settings Manager: RSM v4.0 (For ReSharper 5.1): Donate ChangesChanged the mechanism of locating shared settings files (discussion, issue): You can now create a set of "global" settings files and configure how R# settings will get loaded (settings inheritance and overrides). All solutions located at the same folder and\or subfolders where the global settings file is located will load that file automatically. Improved "Manage Settings" dialog to support new settings sharing features. Bug fixes: 228048 16590 16584Rawr: Rawr 4.0.19 Beta: Rawr is now web-based. The link to use Rawr4 is: http://elitistjerks.com/rawr.phpThis is the Cataclysm Beta Release. More details can be found at the following link http://rawr.codeplex.com/Thread/View.aspx?ThreadId=237262 As of the 4.0.16 release, you can now also begin using the new Downloadable WPF version of Rawr!This is a pre-alpha release of the WPF version, there are likely to be a lot of issues. If you have a problem, please follow the Posting Guidelines and put it into the Issue Trac...IronRuby: 1.1.2: IronRuby 1.1.2 is a servicing release that keeps on improving compatibility with Ruby 1.9.2 and includes IronRuby integration to Visual Studio 2010. We decided to drop 1.8.6 compatibility mode in all post-1.0 releases. We recommend using IronRuby 1.0 if you need 1.8.6 compatibility. In this release we fixed several major issues: - problems that blocked Gem installation in certain cases - regex syntax: the parser was replaced with a new one that is much more compatible with Ruby 1.9.2 - cras...MVVM Light Toolkit: MVVM Light Toolkit V3 SP1 (4): There was a small issue with the previous release that caused errors when installing the templates in VS10 Express. This release corrects the error. Only use this if you encountered issues when installing the previous release. No changes in the binaries.New ProjectsAJAX Map DataConnector: AJAX Map DataConnector is an Open Source + Open Data project focused on connecting the power of Bing Maps AJAX Control, Version 7.0 to the spatial query capabilities of SQL Server 2008. The examples provided here represent a starting point, showing some ways to harness SQL ServerASP.NET Mvc Cdn Management: Cdn Management loads different resources (like styles, scripts etc) from configuration file. It reads resource location (url) from a configuration file and renders it into a page.Azure Content Provider for Telerik File Browser: Windows Azure Storage FileBrowserContentProvider makes it easier for web developers to Connect the Telerik RadFileExplorer control to the Windows Azure Storage. It's developed in VB.NET. BeerForge: BeerForge is an open source application for the home brewer to ease the creation of beer recipes and provide handy calculation tools.budget-manage: ???????????，??????????。Command Line Parsing, C++ and C#: This is a simple project that does command line arguments parsing. C# and C++ projects are supplied, together with unit tests.DeleteAfterRunning: Application allowing you to convert any file to self-deleting executable. You have a picture, audio file or a document you want to share, but don’t want anyone to keep a copy? Simply create a self-deleting package using DeleteAfterRunning that can be opened only once.DotNetNuke Contest: A module for contest voting in DotNetNuke.Foundry: Experiments in language design and data modeling.GenAttributeLib: Libreria per la gestione di attributi generici di un oggetto.Graduation Project Management System: This is our graduation project. It uses Asp.net Mvc 3,Jquery,Ado.net Entity Framework,and so on. by Veiller hu,ZSPiKnow - A tiny wiki: iKnow is a (really) tiny wiki. Up and running in 5 minutes, easy to customize and of course open source and free to use.internationalOffice: This will contain all the code and bugs for a student project.Iroo Package Manager: Orchard package management UI (auto-update)Iroo Version Manager: Version management for Content ItemsJavApi: JavApi provides a collection of .NET classes in the form of the Java API. It thus allows you to use an identical API to develop for both platforms.jsfcore @ Personal Repository: This project contains s wmultiple sampleith various snippets and projects from blog posts, user group talks, and conference sessions. M3 CMS: M3 Cms is a lightweight content management system built on the ASP.NET MVC 4.0 framework. Uses SQLCE database and nHibernate+ActiveRecord framework.Market-Basket Synthetic Data Generator: An open-source C# market-basket synthetic data generator, capable of creating transactions, sequences and taxonomies, based on the IBM Quest version. Written to address the maintainability and portability problems of the original, feedback, fixes and extensions are encouraged!MicroLinq : Libraries for .NET Micro Framework: MicroLinq is a project to bring a small subset of the power of Linq to the .NET Micro Framework. Over time (hours) the project has expanded to include other helpful libraries and proof of concept code others might find useful.MJPEG Decoder for WPF, WinForms, WP7 and XNA: Library to decode MJPEG streams for Silverlight, Windows Phone 7, XNA 4.0, WinForms, and WPF. Sample code showing usage is included with the distribution. For more information, see the full article at Coding4Fun.modSIC: Modulo's Open Distributed SCAP Infrastructure Collector, or modSIC, makes it easier for security analysts to scan an environment vulnerabilities/compliance based on OVAL-Definitions file. It's an open source service specializing in distributed assessment on a network.MoneyTracker: MoneyTracker is used to keep track of transactions, create your own categories and view reports.PixelsCMS: ASP.NET CMS, PixelsCMS, MVC 2rainTwitter: A twitter module/skin for the rainmeter Windows desktop customization platform. (IN DEVELOPMENT)Reactor.ServiceBus: Reactor Service Bus is a light weight .Net service bus built upon the Apache NMS abstraction library. It provides a slim and easy to use interface that supports all the underlying brokers NMS supports.RsMenu: RsMenu es un MenuStrip que permite tener los Informes de Reporting Services en un elegante menu en nuestra aplicacion winform.Top Protocols Expert for Network Monitor: A Network Monitor Expert which shows you the usage frequency of protocols in a trace. This expert plugs into the Network Monitor UI so you run it directly from the Expert menu. trollr.net - remotely configure & control your .Net applications: trollr.net provides a remote configuration and control network to the .Net apps in your enterprise. App configuration becomes centralised and live/runtime changes are pushed to each application - no restart required to pick up the change. Cache control commands can also be sent!Tweet 4 ME: Tweet 4 ME is a Java Micro Edition (MIDP 2.0 CLDC 1.0) based Twitter client built with a custom GUI framework. The application is part of a college project.UntitledGameProject: Untitled Game Project, Logic and Design for eventual port to Android, IOS and WP7web-framework: web??????????。C#??，framework2.0，???????。WebMatrix helpers from old school teachings: Remember when the web was fun? Well it's back with WebMatrix. We are providing just a few minor helper extensions with a sample app that should help Neo on his quest to be one with the Matrix.

  Read the article

• unexplainable packet drops with 5 ethernet NICs and low traffic on Ubuntu

  - by jon

  I'm stuck on problem where my machine started to drops packets with no sign of ANY system load or high interrupt usage after an upgrade to Ubuntu 12.04. My server is a network monitoring sensor, running Ubuntu LTS 12.04, it passively collects packets from 5 interfaces doing network intrusion type stuff. Before the upgrade I managed to collect 200+GB of packets a day while writing them to disk with around 0% packet loss depending on the day with the help of CPU affinity and NIC IRQ to CPU bindings. Now I lose a great deal of packets with none of my applications running and at very low PPS rate which a modern workstation NIC would have no trouble with. Specs: x64 Xeon 4 cores 3.2 Ghz 16 GB RAM NICs: 5 Intel Pro NICs using the e1000 driver (NAPI). [1] eth0 and eth1 are integrated NICs (in the motherboard) There are 2 other PCI-X network cards, each with 2 Ethernet ports. 3 of the interfaces are running at Gigabit Ethernet, the others are not because they're attached to hubs. Specs: [2] http://support.dell.com/support/edocs/systems/pe2850/en/ug/t1390aa.htm uptime 17:36:00 up 1:43, 2 users, load average: 0.00, 0.01, 0.05 # uname -a Linux nms 3.2.0-29-generic #46-Ubuntu SMP Fri Jul 27 17:03:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux I also have the CPU governor set to performance mode and irqbalance off. The problem still occurs with them on. # lspci -t -vv -[0000:00]-+-00.0 Intel Corporation E7520 Memory Controller Hub +-02.0-[01-03]--+-00.0-[02]----0e.0 Dell PowerEdge Expandable RAID controller 4 | \-00.2-[03]-- +-04.0-[04]-- +-05.0-[05-07]--+-00.0-[06]----07.0 Intel Corporation 82541GI Gigabit Ethernet Controller | \-00.2-[07]----08.0 Intel Corporation 82541GI Gigabit Ethernet Controller +-06.0-[08-0a]--+-00.0-[09]--+-04.0 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) | | \-04.1 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) | \-00.2-[0a]--+-02.0 Digium, Inc. Wildcard TE210P/TE212P dual-span T1/E1/J1 card 3.3V | +-03.0 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) | \-03.1 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) +-1d.0 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 +-1d.1 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 +-1d.2 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 +-1d.7 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller +-1e.0-[0b]----0d.0 Advanced Micro Devices [AMD] nee ATI RV100 QY [Radeon 7000/VE] +-1f.0 Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge \-1f.1 Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller I believe the NIC nor the NIC drivers are dropping the packets because ethtool reports 0 under rx_missed_errors and rx_no_buffer_count for each interface. On the old system, if it couldn't keep up this is where the drops would be. I drop packets on multiple interfaces just about every second, usually in small increments of 2-4. I tried all these sysctl values, I'm currently using the uncommented ones. # cat /etc/sysctl.conf # high net.core.netdev_max_backlog = 3000000 net.core.rmem_max = 16000000 net.core.rmem_default = 8000000 # defaults #net.core.netdev_max_backlog = 1000 #net.core.rmem_max = 131071 #net.core.rmem_default = 163480 # moderate #net.core.netdev_max_backlog = 10000 #net.core.rmem_max = 33554432 #net.core.rmem_default = 33554432 Here's an example of an interface stats report with ethtool. They are all the same, nothing is out of the ordinary ( I think ), so I'm only going to show one: ethtool -S eth2 NIC statistics: rx_packets: 7498 tx_packets: 0 rx_bytes: 2722585 tx_bytes: 0 rx_broadcast: 327 tx_broadcast: 0 rx_multicast: 1504 tx_multicast: 0 rx_errors: 0 tx_errors: 0 tx_dropped: 0 multicast: 1504 collisions: 0 rx_length_errors: 0 rx_over_errors: 0 rx_crc_errors: 0 rx_frame_errors: 0 rx_no_buffer_count: 0 rx_missed_errors: 0 tx_aborted_errors: 0 tx_carrier_errors: 0 tx_fifo_errors: 0 tx_heartbeat_errors: 0 tx_window_errors: 0 tx_abort_late_coll: 0 tx_deferred_ok: 0 tx_single_coll_ok: 0 tx_multi_coll_ok: 0 tx_timeout_count: 0 tx_restart_queue: 0 rx_long_length_errors: 0 rx_short_length_errors: 0 rx_align_errors: 0 tx_tcp_seg_good: 0 tx_tcp_seg_failed: 0 rx_flow_control_xon: 0 rx_flow_control_xoff: 0 tx_flow_control_xon: 0 tx_flow_control_xoff: 0 rx_long_byte_count: 2722585 rx_csum_offload_good: 0 rx_csum_offload_errors: 0 alloc_rx_buff_failed: 0 tx_smbus: 0 rx_smbus: 0 dropped_smbus: 01 # ifconfig eth0 Link encap:Ethernet HWaddr 00:11:43:e0:e2:8c UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:373348 errors:16 dropped:95 overruns:0 frame:16 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:356830572 (356.8 MB) TX bytes:0 (0.0 B) eth1 Link encap:Ethernet HWaddr 00:11:43:e0:e2:8d UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:13616 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:8690528 (8.6 MB) TX bytes:0 (0.0 B) eth2 Link encap:Ethernet HWaddr 00:04:23:e1:77:6a UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:7750 errors:0 dropped:471 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2780935 (2.7 MB) TX bytes:0 (0.0 B) eth3 Link encap:Ethernet HWaddr 00:04:23:e1:77:6b UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:5112 errors:0 dropped:206 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:639472 (639.4 KB) TX bytes:0 (0.0 B) eth4 Link encap:Ethernet HWaddr 00:04:23:b6:35:6c UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:961467 errors:0 dropped:935 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:958561305 (958.5 MB) TX bytes:0 (0.0 B) eth5 Link encap:Ethernet HWaddr 00:04:23:b6:35:6d inet addr:192.168.1.6 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4264 errors:0 dropped:16 overruns:0 frame:0 TX packets:699 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:572228 (572.2 KB) TX bytes:124456 (124.4 KB) I tried the defaults, then started to play around with settings. I wasn't using any flow control and I increased the RxDescriptor count to 4096 before the upgrade as well without any problems. # cat /etc/modprobe.d/e1000.conf options e1000 XsumRX=0,0,0,0,0 RxDescriptors=4096,4096,4096,4096,4096 FlowControl=0,0,0,0,0 debug=16 Here's my network configuration file, I turned off checksumming and various offloading mechanisms along with setting CPU affinity with heavy use interfaces getting an entire CPU and light use interfaces sharing a CPU. I used these settings prior to the upgrade without problems. # cat /etc/network/interfaces # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet manual pre-up /sbin/ethtool -G eth0 rx 4096 tx 0 pre-up /sbin/ethtool -K eth0 gro off gso off rx off pre-up /sbin/ethtool -A eth0 rx off autoneg off up ifconfig eth0 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "4" > /proc/irq/48/smp_affinity down ifconfig eth0 down post-down /sbin/ethtool -G eth0 rx 256 tx 256 post-down /sbin/ethtool -K eth0 gro on gso on rx on post-down /sbin/ethtool -A eth0 rx on autoneg on auto eth1 iface eth1 inet manual pre-up /sbin/ethtool -G eth1 rx 4096 tx 0 pre-up /sbin/ethtool -K eth1 gro off gso off rx off pre-up /sbin/ethtool -A eth1 rx off autoneg off up ifconfig eth1 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "4" > /proc/irq/49/smp_affinity down ifconfig eth1 down post-down /sbin/ethtool -G eth1 rx 256 tx 256 post-down /sbin/ethtool -K eth1 gro on gso on rx on post-down /sbin/ethtool -A eth1 rx on autoneg on auto eth2 iface eth2 inet manual pre-up /sbin/ethtool -G eth2 rx 4096 tx 0 pre-up /sbin/ethtool -K eth2 gro off gso off rx off pre-up /sbin/ethtool -A eth2 rx off autoneg off up ifconfig eth2 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "1" > /proc/irq/82/smp_affinity down ifconfig eth2 down post-down /sbin/ethtool -G eth2 rx 256 tx 256 post-down /sbin/ethtool -K eth2 gro on gso on rx on post-down /sbin/ethtool -A eth2 rx on autoneg on auto eth3 iface eth3 inet manual pre-up /sbin/ethtool -G eth3 rx 4096 tx 0 pre-up /sbin/ethtool -K eth3 gro off gso off rx off pre-up /sbin/ethtool -A eth3 rx off autoneg off up ifconfig eth3 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "2" > /proc/irq/83/smp_affinity down ifconfig eth3 down post-down /sbin/ethtool -G eth3 rx 256 tx 256 post-down /sbin/ethtool -K eth3 gro on gso on rx on post-down /sbin/ethtool -A eth3 rx on autoneg on auto eth4 iface eth4 inet manual pre-up /sbin/ethtool -G eth4 rx 4096 tx 0 pre-up /sbin/ethtool -K eth4 gro off gso off rx off pre-up /sbin/ethtool -A eth4 rx off autoneg off up ifconfig eth4 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "4" > /proc/irq/77/smp_affinity down ifconfig eth4 down post-down /sbin/ethtool -G eth4 rx 256 tx 256 post-down /sbin/ethtool -K eth4 gro on gso on rx on post-down /sbin/ethtool -A eth4 rx on autoneg on auto eth5 iface eth5 inet static pre-up /etc/fw.conf address 192.168.1.1 netmask 255.255.255.0 broadcast 192.168.1.255 gateway 192.168.1.1 dns-nameservers 192.168.1.2 192.168.1.3 up ifconfig eth5 up post-up echo "8" > /proc/irq/77/smp_affinity down ifconfig eth5 down Here's a few examples of packet drops, i ran one after another, probabling totaling 3 or 4 seconds. You can see increases in the drops from the 1st and 3rd. This was a non-busy time, very little traffic. # awk '{ print $1,$5 }' /proc/net/dev Inter-| face drop eth3: 225 lo: 0 eth2: 505 eth1: 0 eth5: 17 eth0: 105 eth4: 1034 # awk '{ print $1,$5 }' /proc/net/dev Inter-| face drop eth3: 225 lo: 0 eth2: 507 eth1: 0 eth5: 17 eth0: 105 eth4: 1034 # awk '{ print $1,$5 }' /proc/net/dev Inter-| face drop eth3: 227 lo: 0 eth2: 512 eth1: 0 eth5: 17 eth0: 105 eth4: 1039 I tried the pci=noacpi options. With and without, it's the same. This is what my interrupt stats looked like before the upgrade, after, with ACPI on PCI it showed multiple NICs bound to an interrupt and shared with other devices such as USB drives which I didn't like so I think i'm going to keep it with ACPI off as it's easier to designate sole purpose interrupts. Is there any advantage I would have using the default i.e. ACPI w/ PCI. ? # cat /etc/default/grub | grep CMD_LINE GRUB_CMDLINE_LINUX_DEFAULT="ipv6.disable=1 noacpi pci=noacpi" GRUB_CMDLINE_LINUX="" # cat /proc/interrupts CPU0 CPU1 CPU2 CPU3 0: 45 0 0 16 IO-APIC-edge timer 1: 1 0 0 7936 IO-APIC-edge i8042 2: 0 0 0 0 XT-PIC-XT-PIC cascade 6: 0 0 0 3 IO-APIC-edge floppy 8: 0 0 0 1 IO-APIC-edge rtc0 9: 0 0 0 0 IO-APIC-edge acpi 12: 0 0 0 1809 IO-APIC-edge i8042 14: 1 0 0 4498 IO-APIC-edge ata_piix 15: 0 0 0 0 IO-APIC-edge ata_piix 16: 0 0 0 0 IO-APIC-fasteoi uhci_hcd:usb2 18: 0 0 0 1350 IO-APIC-fasteoi uhci_hcd:usb4, radeon 19: 0 0 0 0 IO-APIC-fasteoi uhci_hcd:usb3 23: 0 0 0 4099 IO-APIC-fasteoi ehci_hcd:usb1 38: 0 0 0 61963 IO-APIC-fasteoi megaraid 48: 0 0 1002319 4 IO-APIC-fasteoi eth0 49: 0 0 38772 3 IO-APIC-fasteoi eth1 77: 0 0 130076 432159 IO-APIC-fasteoi eth4 78: 0 0 0 23917 IO-APIC-fasteoi eth5 82: 1329033 0 0 4 IO-APIC-fasteoi eth2 83: 0 4886525 0 6 IO-APIC-fasteoi eth3 NMI: 5 6 4 5 Non-maskable interrupts LOC: 61409 57076 64257 114764 Local timer interrupts SPU: 0 0 0 0 Spurious interrupts IWI: 0 0 0 0 IRQ work interrupts RES: 17956 25333 13436 14789 Rescheduling interrupts CAL: 22436 607 539 478 Function call interrupts TLB: 1525 1458 4600 4151 TLB shootdowns TRM: 0 0 0 0 Thermal event interrupts THR: 0 0 0 0 Threshold APIC interrupts MCE: 0 0 0 0 Machine check exceptions MCP: 16 16 16 16 Machine check polls ERR: 0 MIS: 0 Here's sample output of vmstat, showing the system. Barebones system right now. root@nms:~# vmstat -S m 1 procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 0 14992 192 1029 0 0 56 2 419 29 1 0 99 0 0 0 0 14992 192 1029 0 0 0 0 922 27 0 0 100 0 0 0 0 14991 192 1029 0 0 0 36 763 50 0 0 100 0 0 0 0 14991 192 1029 0 0 0 0 646 35 0 0 100 0 0 0 0 14991 192 1029 0 0 0 0 722 54 0 0 100 0 0 0 0 14991 192 1029 0 0 0 0 793 27 0 0 100 0 ^C Here's dmesg output. I can't figure out why my PCI-X slots are negotiated as PCI. The network cards are all PCI-X with the exception of the integrated NICs that came with the server. In the output below it looks as if eth3 and eth2 negotiated at PCI-X speeds rather than PCI:66Mhz. Wouldn't they all drop to PCI:66Mhz? If your integrated NICs are PCI, as labeled below (eth0,eth1), then wouldn't all devices on your bus speed drop down to that slower bus speed? If not, I still don't know why only one of my NICs ( each has two ethernet ports) is labeled as PCI-X in the output below. Does that mean it is running at PCI-X speeds are is it showing that it's capable? # dmesg | grep e1000 [ 3678.349337] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 3678.349342] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 3678.349394] e1000 0000:06:07.0: PCI->APIC IRQ transform: INT A -> IRQ 48 [ 3678.409725] e1000 0000:06:07.0: Receive Descriptors set to 4096 [ 3678.409730] e1000 0000:06:07.0: Checksum Offload Disabled [ 3678.409734] e1000 0000:06:07.0: Flow Control Disabled [ 3678.586409] e1000 0000:06:07.0: eth0: (PCI:66MHz:32-bit) 00:11:43:e0:e2:8c [ 3678.586419] e1000 0000:06:07.0: eth0: Intel(R) PRO/1000 Network Connection [ 3678.586642] e1000 0000:07:08.0: PCI->APIC IRQ transform: INT A -> IRQ 49 [ 3678.649854] e1000 0000:07:08.0: Receive Descriptors set to 4096 [ 3678.649859] e1000 0000:07:08.0: Checksum Offload Disabled [ 3678.649863] e1000 0000:07:08.0: Flow Control Disabled [ 3678.826436] e1000 0000:07:08.0: eth1: (PCI:66MHz:32-bit) 00:11:43:e0:e2:8d [ 3678.826444] e1000 0000:07:08.0: eth1: Intel(R) PRO/1000 Network Connection [ 3678.826627] e1000 0000:09:04.0: PCI->APIC IRQ transform: INT A -> IRQ 82 [ 3679.093266] e1000 0000:09:04.0: Receive Descriptors set to 4096 [ 3679.093271] e1000 0000:09:04.0: Checksum Offload Disabled [ 3679.093275] e1000 0000:09:04.0: Flow Control Disabled [ 3679.130239] e1000 0000:09:04.0: eth2: (PCI-X:133MHz:64-bit) 00:04:23:e1:77:6a [ 3679.130246] e1000 0000:09:04.0: eth2: Intel(R) PRO/1000 Network Connection [ 3679.130449] e1000 0000:09:04.1: PCI->APIC IRQ transform: INT B -> IRQ 83 [ 3679.397312] e1000 0000:09:04.1: Receive Descriptors set to 4096 [ 3679.397318] e1000 0000:09:04.1: Checksum Offload Disabled [ 3679.397321] e1000 0000:09:04.1: Flow Control Disabled [ 3679.434350] e1000 0000:09:04.1: eth3: (PCI-X:133MHz:64-bit) 00:04:23:e1:77:6b [ 3679.434360] e1000 0000:09:04.1: eth3: Intel(R) PRO/1000 Network Connection [ 3679.434553] e1000 0000:0a:03.0: PCI->APIC IRQ transform: INT A -> IRQ 77 [ 3679.704072] e1000 0000:0a:03.0: Receive Descriptors set to 4096 [ 3679.704077] e1000 0000:0a:03.0: Checksum Offload Disabled [ 3679.704081] e1000 0000:0a:03.0: Flow Control Disabled [ 3679.738364] e1000 0000:0a:03.0: eth4: (PCI:33MHz:64-bit) 00:04:23:b6:35:6c [ 3679.738371] e1000 0000:0a:03.0: eth4: Intel(R) PRO/1000 Network Connection [ 3679.738538] e1000 0000:0a:03.1: PCI->APIC IRQ transform: INT B -> IRQ 78 [ 3680.046060] e1000 0000:0a:03.1: eth5: (PCI:33MHz:64-bit) 00:04:23:b6:35:6d [ 3680.046067] e1000 0000:0a:03.1: eth5: Intel(R) PRO/1000 Network Connection [ 3682.132415] e1000: eth0 NIC Link is Up 100 Mbps Half Duplex, Flow Control: None [ 3682.224423] e1000: eth1 NIC Link is Up 100 Mbps Half Duplex, Flow Control: None [ 3682.316385] e1000: eth2 NIC Link is Up 100 Mbps Half Duplex, Flow Control: None [ 3682.408391] e1000: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 3682.500396] e1000: eth4 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 3682.708401] e1000: eth5 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX At first I thought it was the NIC drivers but I'm not so sure. I really have no idea where else to look at the moment. Any help is greatly appreciated as I'm struggling with this. If you need more information just ask. Thanks! [1]http://www.cs.fsu.edu/~baker/devices/lxr/http/source/linux/Documentation/networking/e1000.txt?v=2.6.11.8 [2] http://support.dell.com/support/edocs/systems/pe2850/en/ug/t1390aa.htm

  Read the article

• When to implement: Together with or after the source product?

  - by Jeremy Oosthuizen

  Somebody recently relayed a prospect's question to me: How hard would it be to implement OUBI after the source product (CC&B, WAM or NMS) has already been implemented? Fact is that MOST non-OUBI Data Warehouse / Business Intelligence implementations take place after the source application(s) are in place and hopefully stable. If an organization decides that they need better reporting and management information, then the logical path (see The Data Warehouse Institute's Data Warehouse Maturity Model) is to a Data Warehouse -- no matter when their last applications were implemented. If there is a pre-built Data Warehouse for their specific application, or even for the desired business process in their industry, they're in luck. Else they have to design and build from scratch, using a toolset. The implementation of a toolset is unlike the implementation of OUBI which, like OBI Apps, contain pre-built ETL routines and user content. Much has been written before about the advantages of that. So, because OUBI is designed specifically for Oracle Utilities transactional products, we often implement them in parallel -- with OUBI lagging a little behind by necessity, like Reporting. Customers know from the start they're going to need the solution, and therefore purchase the products at the same time. My biggest argument FOR a parallel installation/implementation of OUBI with the source product is two-fold: - There could be things (which is the technical term for data elements) that customers figure out they need when implementing OUBI, which are often easier added to the source product's implementation project, than to add later; - OUBI's ETL often points out errors (severe or not) with converted data, which are easier to fix during the source product's implementation project, or it may even be impossible to fix afterwards. The Conversion routines sometimes miss these errors, because the source system can live with the not-quite-perfect converted data. If the data can't be properly extracted, i.e. the proper Dimensions linked to the Facts, then it can't get into OUBI. That means it can't be analyzed effectively along with the rest of the organization's data. Then there is also the throw-away-work argument, which may be significant. The operational / transactional system cannot go live without reports on Day 1. A lot of those reports would be taken care of by the implementation of OUBI. If OUBI is implemented after go-live, those reports STILL have to be built during the source product's implementation project, but they become throw-away after the OUBI implementation. I have sometimes been told that it is better to implement OUBI after the source product, because it cuts down on scope and risk for the source product's implementation project. All I can say to that, is bah humbug. No, seriously, given the arguments above, planning has to include the OUBI implementation and it has to be managed properly -- just like any other implementation. If so, it should not add any risk and it should be included in the scope from the start. The answer to the prospect's question is therefore that it is not that much more difficult; after all, most DW/BI implemenations are done like that. They just have to consider the points above.

  Read the article

• A catalogue of Cassandra log messages: What is the correct interpretation?

  - by knorv

  The following is a complete catalogue of all log messages generated by Cassandra 0.6 when stress-testing a Cassandra installation over an extended period of time: AntiEntropyService: Sending AEService tree for (,) to: [] CassandraDaemon: Binding thrift service to localhost/N.N.N.N:N CassandraDaemon: Cassandra starting up... ColumnFamilyStore: has reached its threshold; switching in a fresh Memtable at CommitLogContext(file='.../cassandra/commitlog/CommitLog-N.log', position=N) ColumnFamilyStore: Enqueuing flush of Memtable()@N CommitLog: Discarding obsolete commit log:CommitLogSegment(.../cassandra/commitlog/CommitLog-N.log) CommitLog: Log replay complete CommitLog: Replaying .../cassandra/commitlog/CommitLog-N.log, ... CommitLogSegment: Creating new commitlog segment .../cassandra/commitlog/CommitLog-N.log CompactionManager: Compacted to .../cassandra/data//-N-Data.db. N/N bytes for N keys. Time: Nms. CompactionManager: Compacting [org.apache.cassandra.io.SSTableReader(path='.../cassandra/data//-N-Data.db'), ...] DatabaseDescriptor: Auto DiskAccessMode determined to be mmap GCInspector: GC for ConcurrentMarkSweep: N ms, N reclaimed leaving N used; max is N GCInspector: GC for ParNew: N ms, N reclaimed leaving N used; max is N Memtable: Completed flushing .../cassandra/data//-N-Data.db Memtable: Writing Memtable()@N SSTable: Deleted .../cassandra/data//-N-Data.db SSTableDeletingReference: Deleted .../cassandra/data//-N-Data.db SSTableReader: Sampling index for .../cassandra/data//-N-Data.db StorageService: Starting up server gossip SystemTable: Saved ClusterName found: Test Cluster SystemTable: Saved ClusterName not found. Using Test Cluster SystemTable: Saved Token found: N SystemTable: Saved Token not found. Using N For each of the log messages listed - what is the correct interpretation of the log message?

  Read the article

• What kind of library to use for display of graphical objects and right click context menus

  - by Gopal

  Hi all, Goal: To develop a web based NMS interface which displays a network topology (e.g., switches, routers, links, endhosts). Each node should be 'movable' (draggable to an appropriate place manually or their best location computed algorithmically). I should be able to zoom into the network graph (say if there are many clusters of nodes and I want to concentrate on a particular cluster of nodes). I should be able to right-click any node or link and get a context menu (e.g., 'show routing table', 'show interfaces', 'show bandwidth utilization graph' etc.). The data for this network topology will be fetched by making calls to an apache based webserver where the backend scripts in python will fetch the appropriate data and send it via JSON to the web client. Question: I am assuming that some sort of javascript library/framework will be most appropriate for this - jQuery, Dojo, Moo etc. [I've never used any of these before]. Which of these would be most recommended for this sort of thing. Which would be easiest to learn (say in a months time). Thanks for any tips.

  Read the article

• CodePlex Daily Summary for Saturday, June 16, 2012

  CodePlex Daily Summary for Saturday, June 16, 2012Popular ReleasesCosmos (C# Open Source Managed Operating System): Release 92560: Prerequisites Visual Studio 2010 - Any version including Express. Express users must also install Visual Studio 2010 Integrated Shell runtime VMWare - Cosmos can run on real hardware as well as other virtualization environments but our default debug setup is configured for VMWare. VMWare Player (Free). or Workstation VMWare VIX API 1.11AutoUpdaterdotNET : Autoupdate for VB.NET and C# Developer: AutoUpdater.NET 1.1: Release Notes *New feature added that allows user to select remind later interval.Sumzlib: API document: API documentMicrosoft SQL Server Product Samples: Database: AdventureWorks 2008 OLTP Script: Install AdventureWorks2008 OLTP database from script The AdventureWorks database can be created by running the instawdb.sql DDL script contained in the AdventureWorks 2008 OLTP Script.zip file. The instawdb.sql script depends on two path environment variables: SqlSamplesDatabasePath and SqlSamplesSourceDataPath. The SqlSamplesDatabasePath environment variable is set to the default Microsoft ® SQL Server 2008 path. You will need to change the SqlSamplesSourceDataPath environment variable to th...HigLabo: HigLabo_20120613: Bug fix HigLabo.Mail Decode header encoded by CP1252Jasc (just another script compressor): 1.3.1: Updated Ajax Minifier to 4.55.WipeTouch, a jQuery touch plugin: 1.2.0: Changes since 1.1.0: New: wipeMove event, triggered while moving the mouse/finger. New: added "source" to the result object. Bug fix: sometimes vertical wipe events would not trigger correctly. Bug fix: improved tapToClick handler. General code refactoring. Windows Phone 7 is not supported, yet! Its behaviour is completely broken and would require some special tricks to make it work. Maybe in the future...Phalanger - The PHP Language Compiler for the .NET Framework: 3.0.0.3026 (June 2012): Fixes: round( 0.0 ) local TimeZone name TimeZone search compiling multi-script-assemblies PhpString serialization DocDocument::loadHTMLFile() token_get_all() parse_url()BlackJumboDog: Ver5.6.4: 2012.06.13 Ver5.6.4 　(1) Web???????、???POST??????????????????Yahoo! UI Library: YUI Compressor for .Net: Version 2.0.0.0 - Ferret: - Merging both 3.5 and 2.0 codebases to a single .NET 2.0 assembly. - MSBuild Task. - NAnt Task.Bumblebee: Version 0.3.1: Changed default config values to decent ones. Restricted visibility of Hive.fs to internal. Added some XML documentation. Added Array.shuffle utility. The dll is also available on NuGet My apologies, the initial source code referenced was missing one file which prevented it from building The source code contains two examples, one in C#, one in F#, illustrating the usage of the framework on the Travelling Salesman Problem: Source CodeSharePoint XSL Templates: SPXSLT 0.0.9: Added new template FixAmpersands. Fixed the contents of the MultiSelectValueCheck.xsl file, which was missing the stylesheet wrapper.ExcelFileEditor: .CS File: nothingBizTalk Scheduled Task Adapter: Release 4.0: Works with BizTalk Server 2010. Compiled in .NET Framework 4.0. In this new version are available small improvements compared to the current version (3.0). We can highlight the following improvements or changes: 24 hours support in “start time” property. Previous versions had an issue with setting the start time, as it shown 12 hours watch but no AM/PM. Daily scheduler review. Solved a small bug on Daily Properties: unable to switch between “Every day” and “on these days” Installation e...Weapsy - ASP.NET MVC CMS: 1.0.0 RC: - Upgrade to Entity Framework 4.3.1 - Added AutoMapper custom version (by nopCommerce Team) - Added missed model properties and localization resources of Plugin Definitions - Minor changes - Fixed some bugsXenta Framework - extensible enterprise n-tier application framework: Xenta Framework 1.8.0 Beta: Catalog and Publication reviews and ratings Store language packs in data base Improve reporting system Improve Import/Export system A lot of WebAdmin app UI improvements Initial implementation of the WebForum app DB indexes Improve and simplify architecture Less abstractions Modernize architecture Improve, simplify and unify API Simplify and improve testing A lot of new unit tests Codebase refactoring and ReSharpering Utilize Castle Windsor Utilize NHibernate ORM ...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.55: Properly handle IE extension to CSS3 grammar that allows for multiple parameters to functional pseudo-class selectors. add new switch -braces:(new|same) that affects where opening braces are placed in multi-line output. The default, "new" puts them on their own new line; "same" outputs them at the end of the previous line. add new optional values to the -inline switch: -inline:(force|noforce), which can be combined with the existing boolean value via comma-separators; value "force" (which...Microsoft Media Platform: Player Framework: MMP Player Framework 2.7 (Silverlight and WP7): Additional DownloadsSMFv2.7 Full Installer (MSI) - This will install everything you need in order to develop your own SMF player application, including the IIS Smooth Streaming Client. It only includes the assemblies. If you want the source code please follow the link above. Smooth Streaming Sample Player - This is a pre-built player that includes support for IIS Smooth Streaming. You can configure the player to playback your content by simplying editing a configuration file - no need to co...Liberty: v3.2.1.0 Release 10th June 2012: Change Log -Added -Liberty is now digitally signed! If the certificate on Liberty.exe is missing, invalid, or does not state that it was developed by "Xbox Chaos, Open Source Developer," your copy of Liberty may have been altered in some (possibly malicious) way. -Reach Mass biped max health and shield changer -Fixed -H3/ODST Fixed all of the glitches that users kept reporting (also reverted the changes made in 3.2.0.2) -Reach Made some tag names clearer and more consistent between m...Media Companion: Media Companion 3.503b: It has been a while, so it's about time we release another build! Major effort has been for fixing trailer downloads, plus a little bit of work for episode guide tag in TV show NFOs.New Projects.NinJa (dotNinja): An extensive JavaScript Framework revolving around principles found in .NET and aiming to integrate full Intellisense support. bab-rizg: solve unemployment problemBizTalk Multi-part Message Attachments Zipper Pipeline Component: This pipeline component replaces all attachments of a multi-part message, in a send pipeline, for its zipped equivalent.Boggle.Net: A basic implementation of Boggle for WPF.CFScript: CFScript is an ANT-like scripting system for Compact Framework. Tasks like copying files, setting registry values o install CAB files can be done with CFScript.Diablo3: Diablo3Dygraphs.NET: Dygraphs.NETDynamics CRM plugin for nopCommerce: This plugins is a bridge between nopCommerce and Dynamics CRM. nms.gaming: Place holderProject Bright Star: Project Bright Star. Deal with it.RDFSharp: RDFSharp is a library designed to ease the development of .NET applications based on the RDF and Semantic Web data model.SlamCMS: An application framework that allows you to build content managed sites leveraging SharePoint 2010 for publishing with tools to query and manifest your data.test02: no

  Read the article

• Problem with Mootools Ajax request and submitting a form

  - by Arwed

  Hello. This is my problem: I have a table with content comming from a database. Now i tryed to realize a way to (a) delete rows from the table (b) edit the content of the row "on the fly". (a) is working perfectly (b) makes my head smoking! Here is the complete Mootools Code: <script type="text/javascript"> window.addEvent('domready', function() { $('edit_hide').slide('hide'); var saf = new Request.HTML( { url: 'termin_safe.php', encoding: 'utf-8', onComplete: function(response) { document.location.href=''; } }); var req = new Request.HTML( { url: 'fuss_response.php', encoding: 'utf-8', onComplete: function(response) { document.location.href=''; } }); var eDit = $('edit_hide'); var eD = new Request.HTML( { url: 'fuss_response_edit.php', update: eDit, encoding: 'utf-8', onComplete: function(response) { $('sst').addEvent( 'click', function(e){ e.stop(); saf.send(); }); } }); $$('input.edit').addEvent( 'click', function(e){ e.stop(); var aID = 'edit_', bID = '', cID = 'ed_'; var deleteID = this.getProperty('id').replace(aID,bID); var editID = $(this.getProperty('id').replace(aID,cID)); eD.send({data : "id=" + deleteID}); $('edit_hide').slide('toggle'); }); $$('input.delete').addEvent( 'click', function(e){ e.stop(); var aID = 'delete_', bID = ''; var deleteID = this.getProperty('id').replace(aID,bID); new MooDialog.Confirm('Soll der Termin gelöscht werden?', function(){ req.send({data : "id=" + deleteID}); }, function(){ new MooDialog.Alert('Schon Konfuzius hat gesagt: Erst denken dann handeln!'); }); }); }); </script> Here the PHP Part that makes the Edit Form: <?php $cKey = mysql_real_escape_string($_POST['id']); $request = mysql_query("SELECT * FROM fusspflege WHERE ID = '".$cKey."'"); while ($row = mysql_fetch_object($request)) { $id = $row->ID; $name = $row->name; $vor = $row->vorname; $ort = $row->ort; $tel = $row->telefon; $mail = $row->email; } echo '<form id="termin_edit" method="post" action="">'; echo '<div><label>Name:</label><input type="text" id="nns" name="name" value="'.$name.'"></div>'; echo '<div><label>Vorname:</label><input type="text" id="nvs" name="vorname" value="'.$vor.'"></div>'; echo '<div><label>Ort:</label><input type="text" id="nos" name="ort" value="'.$ort.'"></div>'; echo '<div><label>Telefon:</label><input type="text" id="nts" name="telefon" value="'.$tel.'"></div>'; echo '<div><label>eMail:</label><input type="text" id="nms" name="email" value="'.$mail.'"></div>'; echo '<input name="id" type="hidden" id="ids" value="'.$id.'"/>'; echo '<input type="button" id="sst" value="Speichern">'; echo '</form>'; ?> And last the Code of the termin_safe.php $id = mysql_real_escape_string($_POST['id']); $na = mysql_real_escape_string($_POST['name']); $vn = mysql_real_escape_string($_POST['vorname']); $ort = mysql_real_escape_string($_POST['ort']); $tel = mysql_real_escape_string($_POST['telefon']); $em = mysql_real_escape_string($_POST['email']); $score = mysql_query("UPDATE fuspflege SET name = '".$na."', vorname = '".$vn."', ort = '".$ort."', telefon = '".$tel."', email = '".$em."' WHERE ID = '".$id."'"); As far as i can see the request does work but the data is not updated! i guess somethings wrong with the things posted For any suggestions i will be gladly happy!

  Read the article

1