Search Results

Search found 23 results on 1 pages for 'jive dadson'.

Page 1/1 | 1 

• OpenCV 2.0 and Python

  - by Jive Dadson

  I cannot get the example Python programs to run. When executing the Python command "from opencv import cv" I get the message "ImportError: No module named _cv". There is a stale _cv.pyd in the site-packages directory, but no _cv.py anywhere. See step 5 below. MS Windows XP, VC++ 2008, Python 2.6, OpenCV 2.0 Here's what I have done. Downloaded and ran the MS Windows installer for OpenCV2.0. Downloaded and installed CMake Downloaded and installed SWIG Ran CMake. After unchecking "ENABLE_OPENMP" in the CMake GUI, I was able to build OpenCV using INSTALL.vcproj and BUILD_ALL.vcproj. I do not know what the difference is, so I built everything under both of those project files. The C example programs run fine. Copied contents of OpenCV2.0/Python2.6/lib/site-packages to my installed Python2.6/lib/site-packages directory. I notice that it contains an old _cv.pyd and an old libcv.dll.a.

  Read the article

• Class member functions instantiated by traits

  - by Jive Dadson

  I am reluctant to say I can't figure this out, but I can't figure this out. I've googled and searched Stack Overflow, and come up empty. The abstract, and possibly overly vague form of the question is, how can I use the traits-pattern to instantiate non-virtual member functions? The question came up while modernizing a set of multivariate function optimizers that I wrote more than 10 years ago. The optimizers all operate by selecting a straight-line path through the parameter space away from the current best point (the "update"), then finding a better point on that line (the "line search"), then testing for the "done" condition, and if not done, iterating. There are different methods for doing the update, the line-search, and conceivably for the done test, and other things. Mix and match. Different update formulae require different state-variable data. For example, the LMQN update requires a vector, and the BFGS update requires a matrix. If evaluating gradients is cheap, the line-search should do so. If not, it should use function evaluations only. Some methods require more accurate line-searches than others. Those are just some examples. The original version instantiates several of the combinations by means of virtual functions. Some traits are selected by setting mode bits that are tested at runtime. Yuck. It would be trivial to define the traits with #define's and the member functions with #ifdef's and macros. But that's so twenty years ago. It bugs me that I cannot figure out a whiz-bang modern way. If there were only one trait that varied, I could use the curiously recurring template pattern. But I see no way to extend that to arbitrary combinations of traits. I tried doing it using boost::enable_if, etc.. The specialized state information was easy. I managed to get the functions done, but only by resorting to non-friend external functions that have the this-pointer as a parameter. I never even figured out how to make the functions friends, much less member functions. The compiler (VC++ 2008) always complained that things didn't match. I would yell, "SFINAE, you moron!" but the moron is probably me. Perhaps tag-dispatch is the key. I haven't gotten very deeply into that. Surely it's possible, right? If so, what is best practice? UPDATE: Here's another try at explaining it. I want the user to be able to fill out an order (manifest) for a custom optimizer, something like ordering off of a Chinese menu - one from column A, one from column B, etc.. Waiter, from column A (updaters), I'll have the BFGS update with Cholesky-decompositon sauce. From column B (line-searchers), I'll have the cubic interpolation line-search with an eta of 0.4 and a rho of 1e-4, please. Etc... UPDATE: Okay, okay. Here's the playing-around that I've done. I offer it reluctantly, because I suspect it's a completely wrong-headed approach. It runs okay under vc++ 2008. #include <boost/utility.hpp> #include <boost/type_traits/integral_constant.hpp> namespace dj { struct CBFGS { void bar() {printf("CBFGS::bar %d\n", data);} CBFGS(): data(1234){} int data; }; template<class T> struct is_CBFGS: boost::false_type{}; template<> struct is_CBFGS<CBFGS>: boost::true_type{}; struct LMQN {LMQN(): data(54.321){} void bar() {printf("LMQN::bar %lf\n", data);} double data; }; template<class T> struct is_LMQN: boost::false_type{}; template<> struct is_LMQN<LMQN> : boost::true_type{}; struct default_optimizer_traits { typedef CBFGS update_type; }; template<class traits> class Optimizer; template<class traits> void foo(typename boost::enable_if<is_LMQN<typename traits::update_type>, Optimizer<traits> >::type& self) { printf(" LMQN %lf\n", self.data); } template<class traits> void foo(typename boost::enable_if<is_CBFGS<typename traits::update_type>, Optimizer<traits> >::type& self) { printf("CBFGS %d\n", self.data); } template<class traits = default_optimizer_traits> class Optimizer{ friend typename traits::update_type; //friend void dj::foo<traits>(typename Optimizer<traits> & self); // How? public: //void foo(void); // How??? void foo() { dj::foo<traits>(*this); } void bar() { data.bar(); } //protected: // How? typedef typename traits::update_type update_type; update_type data; }; } // namespace dj int main_() { dj::Optimizer<> opt; opt.foo(); opt.bar(); std::getchar(); return 0; }

  Read the article

• Class member functions instantiated by traits [policies, actually]

  - by Jive Dadson

  I am reluctant to say I can't figure this out, but I can't figure this out. I've googled and searched Stack Overflow, and come up empty. The abstract, and possibly overly vague form of the question is, how can I use the traits-pattern to instantiate member functions? [Update: I used the wrong term here. It should be "policies" rather than "traits." Traits describe existing classes. Policies prescribe synthetic classes.] The question came up while modernizing a set of multivariate function optimizers that I wrote more than 10 years ago. The optimizers all operate by selecting a straight-line path through the parameter space away from the current best point (the "update"), then finding a better point on that line (the "line search"), then testing for the "done" condition, and if not done, iterating. There are different methods for doing the update, the line-search, and conceivably for the done test, and other things. Mix and match. Different update formulae require different state-variable data. For example, the LMQN update requires a vector, and the BFGS update requires a matrix. If evaluating gradients is cheap, the line-search should do so. If not, it should use function evaluations only. Some methods require more accurate line-searches than others. Those are just some examples. The original version instantiates several of the combinations by means of virtual functions. Some traits are selected by setting mode bits that are tested at runtime. Yuck. It would be trivial to define the traits with #define's and the member functions with #ifdef's and macros. But that's so twenty years ago. It bugs me that I cannot figure out a whiz-bang modern way. If there were only one trait that varied, I could use the curiously recurring template pattern. But I see no way to extend that to arbitrary combinations of traits. I tried doing it using boost::enable_if, etc.. The specialized state information was easy. I managed to get the functions done, but only by resorting to non-friend external functions that have the this-pointer as a parameter. I never even figured out how to make the functions friends, much less member functions. The compiler (VC++ 2008) always complained that things didn't match. I would yell, "SFINAE, you moron!" but the moron is probably me. Perhaps tag-dispatch is the key. I haven't gotten very deeply into that. Surely it's possible, right? If so, what is best practice? UPDATE: Here's another try at explaining it. I want the user to be able to fill out an order (manifest) for a custom optimizer, something like ordering off of a Chinese menu - one from column A, one from column B, etc.. Waiter, from column A (updaters), I'll have the BFGS update with Cholesky-decompositon sauce. From column B (line-searchers), I'll have the cubic interpolation line-search with an eta of 0.4 and a rho of 1e-4, please. Etc... UPDATE: Okay, okay. Here's the playing-around that I've done. I offer it reluctantly, because I suspect it's a completely wrong-headed approach. It runs okay under vc++ 2008. #include <boost/utility.hpp> #include <boost/type_traits/integral_constant.hpp> namespace dj { struct CBFGS { void bar() {printf("CBFGS::bar %d\n", data);} CBFGS(): data(1234){} int data; }; template<class T> struct is_CBFGS: boost::false_type{}; template<> struct is_CBFGS<CBFGS>: boost::true_type{}; struct LMQN {LMQN(): data(54.321){} void bar() {printf("LMQN::bar %lf\n", data);} double data; }; template<class T> struct is_LMQN: boost::false_type{}; template<> struct is_LMQN<LMQN> : boost::true_type{}; // "Order form" struct default_optimizer_traits { typedef CBFGS update_type; // Selection from column A - updaters }; template<class traits> class Optimizer; template<class traits> void foo(typename boost::enable_if<is_LMQN<typename traits::update_type>, Optimizer<traits> >::type& self) { printf(" LMQN %lf\n", self.data); } template<class traits> void foo(typename boost::enable_if<is_CBFGS<typename traits::update_type>, Optimizer<traits> >::type& self) { printf("CBFGS %d\n", self.data); } template<class traits = default_optimizer_traits> class Optimizer{ friend typename traits::update_type; //friend void dj::foo<traits>(typename Optimizer<traits> & self); // How? public: //void foo(void); // How??? void foo() { dj::foo<traits>(*this); } void bar() { data.bar(); } //protected: // How? typedef typename traits::update_type update_type; update_type data; }; } // namespace dj int main() { dj::Optimizer<> opt; opt.foo(); opt.bar(); std::getchar(); return 0; }

  Read the article

• How to install OpenCV 2.0 on win32

  - by Jive Dadson

  I need to install OpenCV on Win32. I do not have it installed currently. I downloaded OpenCV-2.0.0a-win32.exe and ran it. What the heck do I do now? There are no .lib's and whatnot. I found some instructions for building the release using cmake at http://opencv.willowgarage.com/wiki/InstallGuide . I downloaded the latest and greatest cmake, and tried to follow the instructions, but I was guessing. No joy. I specified VC++9 when I did the "configure," but cmake built a VC++ 6 dsw file. No vcproj. I converted the dsw into a vc++9 vcproj anyway, just to see if it would work. Nope. It compiled lots of files, but many failed because it could not find omp.h. Sure enough, it's not there, anywhere. The build log said, 'A tool returned an error code from "Performing Custom Build Step".' I am lost. Ideally, I would like to find a full installation with all the files pre-built for Win32 vc++ 2008. Failing that, I need instructions that even I can follow. Short sentences and small words, but lots of them. Please help! UPDATE: I tried to build just CXCORE. It complained, "cannot open file 'VCOMPD.lib'" There's that OMP again.

  Read the article

• c++ class member functions selected by traits

  - by Jive Dadson

  I am reluctant to say I can't figure this out, but I can't figure this out. I've googled and searched stackoverflow, and come up empty. The abstract, and possibly overly vague form of the question is, how can I use the traits-pattern to instantiate non-virtual member functions? The question came up while modernizing a set of multivariate function optimizers that I wrote more than 10 years ago. The optimizers all operate by selecting a straight-line path through the parameter space away from the current best point (the "update"), then finding a better point on that line (the "line search"), then testing for the "done" condition, and if not done, iterating. There are different methods for doing the update, the line-search, and conceivably for the done test, and other things. Mix and match. Different update formulae require different state-variable data. For example, the LMQN update requires a vector, and the BFGS update requires a matrix. If evaluating gradients is cheap, the line-search should do so. If not, it should use function evaluations only. Some methods require more accurate line-searches than others. Those are just some examples. The original version instatiates several of the combinations by means of virtual functions. Some traits are selected by setting mode bits. Yuck. It would be trivial to define the traits with #define's and the member functions with #ifdef's and macros. But that's so twenty years ago. It bugs me that I cannot figure out a whiz-bang modern way. If there were only one trait that varied, I could use the curiously recurring template pattern. But I see no way to extend that to arbitrary combinations of traits. I tried doing it using boost::enable_if, etc.. The specialized state info was easy. I managed to get the functions done, but only by resorting to non-friend external functions that have the this-pointer as a parameter. I never even figured out how to make the functions friends, much less member functions. Perhaps tag-dispatch is the key. I haven't gotten very deeply into that. Surely it's possible, right? If so, what is best practice?

  Read the article

• c++ class member functions instatiated by traits

  - by Jive Dadson

  I am reluctant to say I can't figure this out, but I can't figure this out. I've googled and searched stackoverflow, and come up empty. The abstract, and possibly overly vague form of the question is, how can I use the traits-pattern to instantiate non-virtual member functions? The question came up while modernizing a set of multivariate function optimizers that I wrote more than 10 years ago. The optimizers all operate by selecting a straight-line path through the parameter space away from the current best point (the "update"), then finding a better point on that line (the "line search"), then testing for the "done" condition, and if not done, iterating. There are different methods for doing the update, the line-search, and conceivably for the done test, and other things. Mix and match. Different update formulae require different state-variable data. For example, the LMQN update requires a vector, and the BFGS update requires a matrix. If evaluating gradients is cheap, the line-search should do so. If not, it should use function evaluations only. Some methods require more accurate line-searches than others. Those are just some examples. The original version instantiates several of the combinations by means of virtual functions. Some traits are selected by setting mode bits that are tested at runtime. Yuck. It would be trivial to define the traits with #define's and the member functions with #ifdef's and macros. But that's so twenty years ago. It bugs me that I cannot figure out a whiz-bang modern way. If there were only one trait that varied, I could use the curiously recurring template pattern. But I see no way to extend that to arbitrary combinations of traits. I tried doing it using boost::enable_if, etc.. The specialized state info was easy. I managed to get the functions done, but only by resorting to non-friend external functions that have the this-pointer as a parameter. I never even figured out how to make the functions friends, much less member functions. The compiler (vc++ 2008) always complained that things didn't match. I would yell, "SFINAE, you moron!" but the moron is probably me. Perhaps tag-dispatch is the key. I haven't gotten very deeply into that. Surely it's possible, right? If so, what is best practice?

  Read the article

• C or C++ Win32 How can I obtain the number of threads running in my program?

  - by Jive Dadson

  On Win32, how can a C++ program determine how many threads are active in my program's process? Is there an API call?

  Read the article

• C++ class member functions instantiated by traits

  - by Jive Dadson

  I am reluctant to say I can't figure this out, but I can't figure this out. I've googled and searched Stack Overflow, and come up empty. The abstract, and possibly overly vague form of the question is, how can I use the traits-pattern to instantiate non-virtual member functions? The question came up while modernizing a set of multivariate function optimizers that I wrote more than 10 years ago. The optimizers all operate by selecting a straight-line path through the parameter space away from the current best point (the "update"), then finding a better point on that line (the "line search"), then testing for the "done" condition, and if not done, iterating. There are different methods for doing the update, the line-search, and conceivably for the done test, and other things. Mix and match. Different update formulae require different state-variable data. For example, the LMQN update requires a vector, and the BFGS update requires a matrix. If evaluating gradients is cheap, the line-search should do so. If not, it should use function evaluations only. Some methods require more accurate line-searches than others. Those are just some examples. The original version instantiates several of the combinations by means of virtual functions. Some traits are selected by setting mode bits that are tested at runtime. Yuck. It would be trivial to define the traits with #define's and the member functions with #ifdef's and macros. But that's so twenty years ago. It bugs me that I cannot figure out a whiz-bang modern way. If there were only one trait that varied, I could use the curiously recurring template pattern. But I see no way to extend that to arbitrary combinations of traits. I tried doing it using boost::enable_if, etc.. The specialized state information was easy. I managed to get the functions done, but only by resorting to non-friend external functions that have the this-pointer as a parameter. I never even figured out how to make the functions friends, much less member functions. The compiler (VC++ 2008) always complained that things didn't match. I would yell, "SFINAE, you moron!" but the moron is probably me. Perhaps tag-dispatch is the key. I haven't gotten very deeply into that. Surely it's possible, right? If so, what is best practice?

  Read the article

• C or C++ Win32 How many threads are running?

  - by Jive Dadson

  On Win32, how can a C++ program determine how many threads are active in the process? Is there an API call?

  Read the article

• How to get VC# to rebuild auto-generated .cs files?

  - by Jive Dadson

  I imagine this question has been asked and answered, but I cannot find it. I wanted to make a simple GUI to interface to a windows 7 command. I usually use Wx, but since this was to be a windows-only thing, I decided to see if I could whip it out real fast using Visual C# 2010 Express, which I had never used before. Things started off just great. I created a form, put a few buttons and text boxes and such on it, and hit Debug. It came up and ran just like that. No muss, no fuss. So I then designed the form just the way I wanted it, renamed the controls from "Button1" and so forth to meaningful names. But now it's a mess. By clicking around, I discovered that VC# had auto-generated two files called Form1.cs and Form1.Designer.cs. The later contains the bindings between functions and the events generated from user-clicks etc., and the former contains no-op code for those functions, for me to complete. Problem is, the names are all still the original "Button1" and so forth, not the new ones, and the new controls I added after running the first time do not appear at all. I want it to regenerate all that stuff afresh from the finished form. How to?

  Read the article

• MPL 1.1 and APL 2.0 License compatibility

  - by Kenneth Cochran

  I am working a project that is licensed under the MPL 1.1 and would like to incorporate some code that is licensed under the APL 2.0. I know in 2010 Mozilla announced they were updating the MPL to make it more "Apache compatible" among other things. I'm no lawyer. Exactly what part(s) of the MPL 1.1 don't jive with the APL 2.0 and vice versa? The project has very few of its original contributers still actively involved so I doubt I'd be able to contact all of them to get permission to change the license.

  Read the article

• We Heart Discussion Forums (and Know You Do Too)

  - by oracletechnet

  It's not generally known, but Oracle (via Oracle Technology Network) hosts one of the largest discussion forums instances (forums.oracle.com) on the planet (founded in 2001), containing nearly 10 million messages from 1 million registered users. That's a whole lot of conversations! And we really, really value those conversations - they span almost every conceivable technical subject across hundreds of products and technologies. More often not - and this is by design - those discussions are stewarded by community volunteers, many of whom are Oracle ACEs (who in fact earned their ACE stripes that way). And so, I am very happy to tell you that we have just initiated a project with our platform partner, Jive Software, to upgrade that platform to the most current, modern version available. The end result should be a vastly improved user experience for everyone involved, in all dimensions. There are many, many details to work on in coming weeks, but we'll keep you posted - and, when needed, come back to you for advice and suggestions. For now, we just wanted to share the good news!

  Read the article

• Reimage several of the same model PC by copying the hard disk

  - by Tim Lehner

  I have several of the same machine (Dell Precision T3500) that originally came with Windows 7 Pro (there is a Windows 7 Pro OA product key sticker on top of each one). These were initially downgraded to XP by a former IT colleague, but are now back in the pool of unused machines. I am looking to format and install Windows 7 Pro on one of them using the latest official Win7 installer ISO with SP1 and then clone the hard drive to the other machines. The questions then, are: Does this even make sense, or is there a better way to do this considering I'm only doing it to 6 machines? Does this jive with MS licensing (we are the original purchaser of the machines, and thus, presumably, the license holder...but I'm no expert)? Is it possible to apply the individual 25-char product keys to the cloned machines after cloning? How far can I go in the config process (installing corporate standard apps and such) before I have to clone to the other machines considering the licensing/key questions?

  Read the article

• what does it mean for MalwareBytes to find malicious registry keys but nothing else?

  - by EndangeringSpecies

  I have a machine that is obviously infected, and when I ran MalwareBytes it told me that it found some "malicious" registry keys (surprisingly enough these contained file path to currently non-existent javascript files). But, that's it. Full scan did not uncover any malicious files, or malicious hidden processes in memory. Like, maybe the (hidden?) process that for whatever reason periodically injects keystrokes (hotkeys?) into whatever currently open window. Then on another, not obviously infected, machine it found a "malware.trace" registry key but again no files or processes etc. How does this jive with people's experience with MalwareBytes? Does it usually find registry key symptoms of an infection but nothing else? Or is it a common thing to have no infection but some malicious registry keys in place anyway?

  Read the article

• Which forum software has the most advanced community/GetSatisfaction type features?

  - by Gaia

  I need to assemble a GetSatisfaction/Lithium/Jive type support forum/community. The first is not available in the desired language and the last two are priced for the enterprise market. I did research some other options (open source or SaaS) but they all seem to be either: kind of dead (open source options) too focused in gathering ideas/feedback (uservoice) strictly support without the community/voting features (zendesk) I need an open forum (people powered support/UGC with community/voting features). Therefore I will have to do some of the work on my own. I want to piece things (plugins/mods/etc) on top of a standard forum platform to give it the features I need. For this purpose, I want to use a mature product with widespread userbase, active community and lots of plugin options. I believe most will agree that my options therefore are: vBulletin phpBB SMF Here are the questions: Which one of the three above offers the easier path towards the desired goal? Which one of the three above has the most advanced features related to the desired goal? Of course I dont expect anyone to know these answers cut and dry. I am hoping to hear some experiences and see some examples. Also, it would be great if both those questions had the same answer, but I am not going to get my hopes up... PS: I wish I could add the tags "phpbb" and "smf" ;)

  Read the article

• Is writing to a socket an arbitrary limitation of the sendfile() syscall?

  - by Sufian

  Prelude sendfile() is an extremely useful syscall for two reasons: First, it's less code than a read()/write() (or recv()/send() if you prefer that jive) loop. Second, it's faster (less syscalls, implementation may copy between devices without buffer, etc...) than the aforementioned methods. Less code. More efficient. Awesome. In UNIX, everything is (mostly) a file. This is the ugly territory from the collision of platonic theory and real-world practice. I understand that sockets are fundamentally different than files residing on some device. I haven't dug through the sources of Linux/*BSD/Darwin/whatever OS implements sendfile() to know why this specific syscall is restricted to writing to sockets (specifically, streaming sockets). I just want to know... Question What is limiting sendfile() from allowing the destination file descriptor to be something besides a socket (like a disk file, or a pipe)?

  Read the article

• Rails with DB2 and multiple schemas

  - by GNUMatrix

  I have a 'legacy' DB2 database that has many other applications and users. Trying to experiment with a rails app. Got everything working great with the ibm_db driver. Problem is that I have some tables like schema1.products, schema1.sales and other tables like schema2.employees and schema2.payroll. In the ibm_db adapter connection, I specify a schema, like schema1 or schema2, and I can work within that one schema, but I need to be able to easily (and transparently) reference both schemas basically interchangeably. I don't want to break the other apps, and the SQL I would normally write against DB2 doesn't have any of these restrictions (schemas can be mixed in SQL against DB2 without any trouble at all). I would like to just specify table names as "schema1.products" for example and be done with it, but that doesn't seem to jive with the "rails way" of going about it. Suggestions?

  Read the article

• Please help us non-C++ developers understand what RAII is

  - by Charlie Flowers

  Another question I thought for sure would have been asked before, but I don't see it in the "Related Questions" list. Could you C++ developers please give us a good description of what RAII is, why it is important, and whether or not it might have any relevance to other languages? I do know a little bit. I believe it stands for "Resource Acquisition is Initialization". However, that name doesn't jive with my (possibly incorrect) understanding of what RAII is: I get the impression that RAII is a way of initializing objects on the stack such that, when those variables go out of scope, the destructors will automatically be called causing the resources to be cleaned up. So why isn't that called "using the stack to trigger cleanup" (UTSTTC:)? How do you get from there to "RAII"? And how can you make something on the stack that will cause the cleanup of something that lives on the heap? Also, are there cases where you can't use RAII? Do you ever find yourself wishing for garbage collection? At least a garbage collector you could use for some objects while letting others be managed? Thanks.

  Read the article

• Should I invest in GraniteDS for Flex + Java development?

  - by Boden

  I'm new to Flex development, and RIAs in general. I've got a CRUD-style Java + Spring + Hibernate service on top of which I'm writing a Flex UI. Currently I'm using BlazeDS. This is an internal application running on a local network. It's become apparent to me that the way RIAs work is more similar to a desktop application than a web application in that we load up the entire model and work with it directly on the client (or at least the portion that we're interested in). This doesn't really jive well with BlazeDS because really it only supports remoting and not data management, thus it can become a lot of extra work to make sure that clients are in sync and to avoid reloading the model which can be large (especially since lazy loading is not possible). So it feels like what I'm left with is a situation where I have to treat my Flex application more like a regular old web application where I do a lot of fine grained loading of data. LiveCycle is too expensive. The free version of WebOrb for Java really only does remoting. Enter GraniteDS. As far as I can determine, it's the only free solution out there that has many of the data management features of LiveCycle. I've started to go through its documentation a bit and suddenly feel like it's yet another quagmire of framework that I'll have to learn just to get an application running. So my question(s) to the StackOverflow audience is: 1) do you recommend GraniteDS, especially if my current Java stack is Spring + Hibernate? 2) at what point do you feel like it starts to pay off? That is, at what level of application complexity do you feel that using GraniteDS really starts to make development that much better? In what ways?

  Read the article

• PHP: Building A Stock Index Using Yahoo Finance [on hold]

  - by Jeremy

  I have the following code which is pulling data but it is not outputting properly. <?php class YahooStock { public function getQuotes(){ $stocks = array(); $result = array(); $s = file_get_contents("http://finance.yahoo.com/d/quotes.csv?s=AMZN+CRM+CNQR+CTL+CTXS+DWRE+EMC+GOOG+HP+IBM+JIVE+LNKD+MKTO+MSFT+N+NFLX+NOW+ORCL+RAX+SAP+T+VEEV+VMW+VZ+WDAY&f=npf6&e=.csv"); $data = explode( ',', $s); $result = $data; return $result; } } $objYahooStock = new YahooStock; foreach( $objYahooStock->getQuotes() as $code => $result){ echo 'Name:' . $result[0] . '<br />'; echo 'Price:' . $result[1] . '<br />'; echo 'Float:' . $result[2] . '<br />'; } ?> The output looks like it is separating every character with a comma instead of each column: Name:" Price:A Float:m Name: Price:I Float:n Name:3 Price:3 Float:2 Name: Price: Float: Any help is appreciated!

  Read the article

• What's the best scenario for using a wireless router with Comcast Business Class

  - by Buck

  Just had Comcast Business Class internet installed (usage details at bottom of post). During the call to order I asked about the hardware they'd be providing and was told it was a docsis 3 modem that I'd have to pay $7.00/month for. Figuring I'd have to buy a router anyway, I decided to get my own modem - a Surfboard SB6121 Docsis 3. I called in to tech support to ask some questions and learned that the modem they would have provided DID have a router built in. It's an SMCD3G-CCR. It's not wireless (we need wireless). The guy explained that it was better to have their hardware here because if there's a problem with our service and we're using our own hardware, chances are they'll blame it on our hardware and do nothing since they don't support it. He explained that I could still hang my own wireless router off their modem/router and if we ever had any service problems, we'd be able to plug directly into their hardware and they'd be able to tell where the problem is and they wouldn't be able to pawn it off onto "customer provided equipment". That all said, a few questions: 1. Am I better off returning my Surfboard modem and getting the Comcast one? If I get a wireless router and plug into one of the ethernet ports of the Comcast device, should I NOT plug anything else into the Comcast device since it would be a different network from anything connecting via the wireless router? Is that correct? Given that I know VERY LITTLE about networking and setting up hardware like this... since I need wireless and will HAVE to get a wireless router to work with this Comcast device, do I need to do anything with the settings of the Comcast device? Do I use security on the Comcast device or the wireless router or both? Any suggestions or anything I need to think about, given this scenario, in order to use a business-type voip service like RingCentral or Jive or Nextiva? Any recommendations on a wireless router for this scenario? We are running 2 PCs (possibly 3-4 in the future) - could be wired for the time being if needed but would prefer wireless; would like to have a networked hard drive and a networked printer; NEED business-type VOIP service asap for 2 phone lines. Would like to hook up some IP cameras at some point (but not the kind that require static IPs since I don't have one nor do I plan to pay Comcast another $15/month for one). I don't have or plan to have any type of web servers or anything like that. Want to use WPA or WPA2 security and take advantage of the NAT feature of the router for additional protection (that's the extent of my networking knowledge).

  Read the article

• Authorize.Net, Silent Posts, and URL Rewriting Don't Mix

  The too long, didn't read synopsis: If you use Authorize.Net and its silent post feature and it stops working, make sure that if your website uses URL rewriting to strip or add a www to the domain name that the URL you specify for the silent post matches the URL rewriting rule because Authorize.Net's silent post feature won't resubmit the post request to URL specified via the redirect response. I have a client that uses Authorize.Net to manage and bill customers. Like many payment gateways, Authorize.Net supports recurring payments. For example, a website may charge members a monthly fee to access their services. With Authorize.Net you can provide the billing amount and schedule and at each interval Authorize.Net will automatically charge the customer's credit card and deposit the funds to your account. You may want to do something whenever Authorize.Net performs a recurring payment. For instance, if the recurring payment charge was a success you would extend the customer's service; if the transaction was denied then you would cancel their service (or whatever). To accomodate this, Authorize.Net offers a silent post feature. Properly configured, Authorize.Net will send an HTTP request that contains details of the recurring payment transaction to a URL that you specify. This URL could be an ASP.NET page on your server that then parses the data from Authorize.Net and updates the specified customer's account accordingly. (Of course, you can always view the history of recurring payments through the reporting interface on Authorize.Net's website; the silent post feature gives you a way to programmatically respond to a recurring payment.) Recently, this client of mine that uses Authorize.Net informed me that several paying customers were telling him that their access to the site had been cut off even though their credit cards had been recently billed. Looking through our logs, I noticed that we had not shown any recurring payment log activity for over a month. I figured one of two things must be going on: either Authorize.Net wasn't sending us the silent post requests anymore or the page that was processing them wasn't doing so correctly. I started by verifying that our Authorize.Net account was properly setup to use the silent post feature and that it was pointing to the correct URL. Authorize.Net's site indicated the silent post was configured and that recurring payment transaction details were being sent to http://example.com/AuthorizeNetProcessingPage.aspx. Next, I wanted to determine what information was getting sent to that URL.The application was setup tolog the parsed results of the Authorize.Net request, such as what customer the recurring payment applied to; however,we were not logging the actual HTTP request coming from Authorize.Net. I contacted Authorize.Net's support to inquire if they logged the HTTP request send via the silent post feature and was told that they did not. I decided to add a bit of code to log the incoming HTTP request, which you can do by using the Request object's SaveAs method. This allowed me to saveevery incoming HTTP request to the silent post page to a text file on the server. Upon the next recurring payment, I was able to see the HTTP request being received by the page: GET /AuthorizeNetProcessingPage.aspx HTTP/1.1Connection: CloseAccept: */*Host: www.example.com That was it. Two things alarmed me: first, the request was obviously a GET and not a POST; second, there was no POST body (obviously), which is where Authorize.Net passes along thedetails of the recurring payment transaction.What stuck out was the Host header, which differed slightly from the silent post URL configured in Authorize.Net. Specifically, the Host header in the above logged request pointed to www.example.com, whereas the Authorize.Net configuration used example.com (no www). About a month ago - the same time these recurring payment transaction detailswere no longer being processed by our ASP.NET page - we had implemented IIS 7's URL rewriting feature to permanently redirect all traffic to example.com to www.example.com. Could that be the problem? I contacted Authorize.Net's support again and asked them if their silent post algorithmwould follow the301HTTP response and repost the recurring payment transaction details. They said, Yes, the silent post would follow redirects. Their reports didn't jive with my observations, so I went ahead and updated our Authorize.Net configuration to point to http://www.example.com/AuthorizeNetProcessingPage.aspx instead of http://example.com/AuthorizeNetProcessingPage.aspx. And, I'm happy to report, recurring payments and correctly being processed again! If you use Authorize.Net and the silent post feature, and you notice that your processing page is not longer working, make sure you are not using any URL rewriting rules that may conflict with the silent post URL configuration. Hope this saves someone the time it took me to get to the bottom of this. Happy Programming!Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Cloning a WebCenter Portal Managed Server

  - by Maiko Rocha

  I had to run some tests on a WebCenter Portal application deployed in a cluster. I've got a development VM with WebCenter PS4 (this also works on PS5) and I was trying to figure out how could I easily add a new managed server to my single-node domain, and make it a cluster. Creating the machine and cluster are a piece of cake, you can do it pretty quick through WLS Console. Now, you'd guess that using the clone option on WLS Console would do the magic of cloning an existing instance, right? Well, it does, but all you get is an "empty" managed server: with no target libraries.  It was a good surprise to find that WebCenter provides a way of cloning an existing WebCenter Portal managed server through a simple WLST command: cloneWebCenterManagedServer  This is a screenshot of my starting point. I want to clone WC_CustomPortal managed server: These are the steps to clone my WC_CustomPortal managed server: 1. In the command line, invoke WLST. It should be on <ORACLE_HOME_for_component>/common/bin/wlst.sh. In my case, it is ./product/Middleware/WebCenterPortal/common/bin/wlst.sh 2. Connect to the Admin Server:  connect ('<wls_admin_username>','<password>','t3://<server>:<port>') 3. Execute the following command: wls:/webcenter/serverConfig> cloneWebCenterManagedServer(baseManagedServer='WC_CustomPortal', newManagedServer='WC_CustomPortal2', newManagedServerPort=8893, verbose=1) I've turned on verbose output on purpose so I could see what the script was doing while executing. This is the output:  [...] Creating the Managed Server "WC_CustomPortal2" MBean type Server with name WC_CustomPortal2 has been created successfully. Targeting the library "oracle.bi.adf.model.slib#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "oracle.bi.adf.view.slib#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "oracle.bi.adf.webcenter.slib#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "oracle.wsm.seedpolicies#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "oracle.jsp.next#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "oracle.dconfig-infra#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "orai18n-adf#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "oracle.adf.dconfigbeans#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "oracle.pwdgen#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "oracle.jrf.system.filter" to the Managed Server "WC_CustomPortal2" Targeting the library "adf.oracle.domain#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "adf.oracle.businesseditor#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "oracle.adf.management#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "adf.oracle.domain.webapp#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "jsf#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "jstl#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "UIX#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "ohw-rcf#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "ohw-uix#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "oracle.adf.desktopintegration.model#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "oracle.adf.desktopintegration#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "oracle.bi.jbips#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "oracle.bi.composer#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "oracle.webcenter.skin#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "oracle.webcenter.composer#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "oracle.webcenter.framework.core#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "oracle.sdp.client#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "oracle.soa.workflow.wc#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "oracle.soa.worklist.webapp#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "oracle.ucm.ridc.app-lib#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "p13n-app-lib-base#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "p13n-core-web-lib#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "jaxrs-framework-web-lib#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "jersey-web-lib#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "wcps-util-app-lib#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "wcps-services-client-web-lib#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "content-app-lib#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "content-web-lib#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "oracle.webcenter.framework#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "oracle.webcenter.framework.view#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "oracle.webcenter.forum.dependency#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "oracle.webcenter.jive.dependency#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "oracle.webcenter.spaces.fwk#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "oracle.webcenter.activitygraph.lib#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the datasource "mds-CustomPortalDS" to the Managed Server "WC_CustomPortal2" Targeting the datasource "WebCenter-CustomPortalDS" to the Managed Server "WC_CustomPortal2" Targeting the datasource "Activities-CustomPortalDS" to the Managed Server "WC_CustomPortal2" Targeting the application "wsil-wls" to the Managed Server "WC_CustomPortal2" Targeting the application "DMS Application#11.1.1.1.0" to the Managed Server "WC_CustomPortal2" Targeting the application "ViewHandlerOverride_webapp1#V2.0" to the Managed Server "WC_CustomPortal2" Targeting the application "ViewHandlerOverride_application1#V2.0" to the Managed Server "WC_CustomPortal2" Targeting the startup class "JRF Startup Class" to the Managed Server "WC_CustomPortal2" Targeting the startup class "JPS Startup Class" to the Managed Server "WC_CustomPortal2" Targeting the startup class "ODL-Startup" to the Managed Server "WC_CustomPortal2" Targeting the startup class "Audit Loader Startup Class" to the Managed Server "WC_CustomPortal2" Targeting the startup class "AWT Application Context Startup Class" to the Managed Server "WC_CustomPortal2" Targeting the startup class "JMX Framework Startup Class" to the Managed Server "WC_CustomPortal2" Targeting the startup class "Web Services Startup Class" to the Managed Server "WC_CustomPortal2" Targeting the startup class "JOC-Startup" to the Managed Server "WC_CustomPortal2" Targeting the startup class "DMS-Startup" to the Managed Server "WC_CustomPortal2" Targeting the shutdown class "JOC-Shutdown" to the Managed Server "WC_CustomPortal2" Targeting the shutdown class "DMSShutdown" to the Managed Server "WC_CustomPortal2" Validating changes ... Validated the changes successfully [...] And this is the newly created WC_CustomPortal2 managed server showing up on Weblogic console:  Here is the full reference to WebCenter Portal Custom WLST Commands. Special thanks to Todd Vender for pointing this one out! :-)

  Read the article

1