Search Results

Search found 1365 results on 55 pages for 'joe purvis'.

Page 1/55 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • How do you install a USB CD Rom drive?

    - by Matt Allen
    Hello, I recently purchased a USB CD ROM drive, but I don't know how to get it to work with my computer which runs Ubuntu 10.04. http://www.amazon.com/gp/product/B00303H908/ref=oss_product When I issue the lsusb command, it shows up as: Bus 002 Device 016: ID 05e3:0701 Genesys Logic, Inc. USB 2.0 IDE Adapter The computer doesn't recognize it automatically. How can I get this drive to show up as an actual drive on my computer? If this particular drive can't handle Linux, can you recommended one which can and provide a link to it so I can purchase it? Thanks! Update: I was asked by Scaine to run a command and report back with the output: joe@joe-laptop:~$ tail -f /var/log/kern.log Dec 29 12:51:35 joe-laptop kernel: [103190.551437] sr 7:0:0:0: [sr1] Add. Sense: Illegal mode for this track Dec 29 12:51:35 joe-laptop kernel: [103190.551446] sr 7:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00 Dec 29 12:51:35 joe-laptop kernel: [103190.551463] end_request: I/O error, dev sr1, sector 0 Dec 29 12:51:35 joe-laptop kernel: [103190.877542] sr 7:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Dec 29 12:51:35 joe-laptop kernel: [103190.877551] sr 7:0:0:0: [sr1] Sense Key : Illegal Request [current] Dec 29 12:51:35 joe-laptop kernel: [103190.877559] Info fld=0x0, ILI Dec 29 12:51:35 joe-laptop kernel: [103190.877562] sr 7:0:0:0: [sr1] Add. Sense: Illegal mode for this track Dec 29 12:51:35 joe-laptop kernel: [103190.877572] sr 7:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00 Dec 29 12:51:35 joe-laptop kernel: [103190.877588] end_request: I/O error, dev sr1, sector 0 Dec 29 13:08:46 joe-laptop kernel: [104221.558911] usb 2-2.2: USB disconnect, address 16 Then when I plugged the drive back into the computer, I got: Dec 29 13:10:29 joe-laptop kernel: [104324.668320] usb 2-2.2: new high speed USB device using ehci_hcd and address 17 Dec 29 13:10:29 joe-laptop kernel: [104324.761702] usb 2-2.2: configuration #1 chosen from 1 choice Dec 29 13:10:29 joe-laptop kernel: [104324.762700] scsi8 : SCSI emulation for USB Mass Storage devices Dec 29 13:10:29 joe-laptop kernel: [104324.762935] usb-storage: device found at 17 Dec 29 13:10:29 joe-laptop kernel: [104324.762938] usb-storage: waiting for device to settle before scanning Dec 29 13:10:34 joe-laptop kernel: [104329.760521] usb-storage: device scan complete Dec 29 13:10:34 joe-laptop kernel: [104329.761344] scsi 8:0:0:0: CD-ROM TEAC CD-224E 1.7A PQ: 0 ANSI: 0 CCS Dec 29 13:10:34 joe-laptop kernel: [104329.767425] sr1: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray Dec 29 13:10:34 joe-laptop kernel: [104329.767612] sr 8:0:0:0: Attached scsi CD-ROM sr1 Dec 29 13:10:34 joe-laptop kernel: [104329.767720] sr 8:0:0:0: Attached scsi generic sg2 type 5 Dec 29 13:10:34 joe-laptop kernel: [104330.141060] sr 8:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Dec 29 13:10:34 joe-laptop kernel: [104330.141069] sr 8:0:0:0: [sr1] Sense Key : Illegal Request [current] Dec 29 13:10:34 joe-laptop kernel: [104330.141077] Info fld=0x0, ILI Dec 29 13:10:34 joe-laptop kernel: [104330.141081] sr 8:0:0:0: [sr1] Add. Sense: Illegal mode for this track Dec 29 13:10:34 joe-laptop kernel: [104330.141090] sr 8:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00 Dec 29 13:10:34 joe-laptop kernel: [104330.141106] end_request: I/O error, dev sr1, sector 0 Dec 29 13:10:34 joe-laptop kernel: [104330.141113] __ratelimit: 18 callbacks suppressed There was more output than this (the number of lines started growing after the drive was plugged back in, and kept growing), but this is the first few lines.

    Read the article

  • Devfish Joe Healy in Fort Lauderdale - Cloud Computing and Azure - 03/11/2010 MSDN Tiki Hut

    - by Rainer
    Devfish Joe Healy, Brian Hitney, and Herve Rogero presented excellent sessions on today's MSDN Tiki Hut Event about  Cloud Computing and Azure. This was an developer focused event, starting out with an overview about structure and platform, followed by working code samples running on the platform, and all needed information to get developers started on development for cloud applications. Participants had Q&A opportunities after each session and made good use of it. I am sure that a lot of developers will jump on the Azure train. Azure is on top of my dev project list after that great event! This platform offers endless opportunities for development and businesses. The cloud environment in general is safer, scales better, and is far more cost effective compared to run and maintain your own data center. Posted: Rainer Habermann

    Read the article

  • TFS, G.I. Joe and Under-doing

    If I were to rank the most consistently irritating parts of my work day, using TFS would come in first by a wide margin. Even repeated network outages this week seem like a pleasant reprieve from this monolithic beast. This is not a reflexive anti-Microsoft feeling, that attitude just wouldnt work for a consultant who does .NET development. It is also not an utter dismissal of TFS as worthless; Ive seen people use it effectively on several projects. So why? Ill start with a laundry list of shortcomings. An out of the box UI for work items that is insultingly bad, a source control system that is confoundingly fragile when handling merges, folder renames and long file names, the arcane XML wizardry necessary to customize a template and a build system that adds an extra layer of oddness on top of msbuild. Im sure my legion of readers will soon point out to me how I can work around all these issues, how this is fixed in TFS 2010 or with this add-in, and how once you have everything set up, youre fine. And theyd be right, any one of these problems could be worked around. If not dirty laundry, what else? I thought about it for a while, and came to the conclusion that TFS is so irritating to me because it represents a vision of software development that I find unappealing. To expand upon this, lets start with some wisdom from those great PSAs at the end of the G.I. Joe cartoons of the 80s: Now you know, and knowing is half the battle. In software development, Id go further and say knowing is more than half the battle. Understanding the dimensions of the problem you are trying to solve, the needs of the users, the value that your software can provide are more than half the battle. Implementation of this understanding is not easy, but it is not even possible without this knowledge. Assuming we have a fixed amount of time and mental energy for any project, why does this spell trouble for TFS? If you think about what TFS is doing, its offering you a huge array of options to track the day to day implementation of your project. From tasks, to code churn, to test coverage. All valuable metrics, but only in exchange for valuable time to get it all working. In addition, when you have a shiny toy like TFS, the temptation is to feel obligated to use it. So the push from TFS is to encourage a project manager and team to focus on process and metrics around process. You can get great visibility, and graphs to show your project stakeholders, but none of that is important if you are not implementing the right product. Not just unimportant, these activities can be harmful as they drain your time and sap your creativity away from the rest of the project. To be more concrete, lets suppose your organization has invested the time to create a template for your projects and trained people in how to use it, so there is no longer a big investment of time for each project to get up and running. First, Id challenge if that template could be specific enough to be full featured and still applicable for any project. Second, the very existence of this template would be a indication to a project manager that the success of their project was somehow directly related to fitting management of that project into this format. Again, while the capabilities are wonderful, the mirage is there; just get everything into TFS and your project will run smoothly. Ill close the loop on this first topic by proposing a thought experiment. Think of the projects youve worked on. How many times have you been chagrined to discover youve implemented the wrong feature, misunderstood how a feature should work or just plain spent too much time on a screen that nobody uses? That sounds like a really worthwhile area to invest time in improving. How about going back to these projects and thinking about how many times you wished you had optimized the state change flow of your tasks or been embarrassed to not have a code churn report linked back to the latest changeset? With thanks to the Real American Heroes, Ill move on to a more current influence, that of the developers at 37signals, and their philosophy towards software development. This philosophy, fully detailed in the books Getting Real and Rework, is a vision of software that under does the competition. This is software that is deliberately limited in functionality in order to concentrate fully on making sure ever feature that is there is awesome and needed. Why is this relevant? Well, in one of those fun seeming paradoxes in life, constraints can be a spark for creativity. Think Twitter, the small screen of an iPhone, the limitations of HTML for applications, the low memory limits of older or embedded system. As long as there is some freedom within those constraints, amazing things emerge. For project management, some of the most respected people in the industry recommend using just index cards, pens and tape. They argue that with change the constant in software development, your process should be as limited (yet rigorous) as possible. Looking at TFS, this is not a system designed to under do anybody. It is a big jumble of components and options, with every feature you could think of. Predictably this means many basic functions are hard to use. For task management, many people just use an Excel spreadsheet linked up to TFS. Not a stirring endorsement of the tooling there. TFS as a whole would be far more appealing to me if there was less of it, but better. Id cut 50% of the features to make the other half really amaze and inspire me. And thats really the heart of the matter. TFS has great promise and I want to believe it can work better. But ultimately it focuses your attention on a lot of stuff that doesnt really matter and then clamps down your creativity in a mess of forms and dialogs obscuring what does.   --- Relevant Links --- All those great G.I. Joe PSAs are on YouTube, including lots of mashed up versions. A simple Google search will get you on the right track.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • WPB .Net User Group 11/29 Meeting - Kinect SDK with Joe Healy - New Meeting Location

    - by Sam Abraham
    We are excited to share great news and updates regarding the West Palm Beach .Net User Group. Our upcoming meeting will feature Joe Healy from Microsoft as speaker for the November 29th, 2011 6:30 PM meeting.   He will be covering the Kinect SDK and answering all our questions regarding the latest Windows Phone 7 Release. We will be also raffling many valuable items as part of our usual free raffle and hope each of our members leaves with a freebie.   We are also honored to share that we will be hosting our special meeting at a new location:   PC Professor 6080 Okeechobee Blvd.,  #200 West Palm Beach, FL 33417 Phone: 561-684-3333.   This is right by the Florida Turnpike entrance on Okeechobee Blvd.   PC Professor will be also providing our free pizza/soda and some additional surprise items for this meeting to mark the debut of our meetings at their location!   We would like to use this opportunity to thank our current host, CompTec, for its generous support and for hosting us for the past 2 years and look forward to their continued support and sponsorship.   A lot of work and effort is put into hosting a meeting that we hope translates into added value and benefit for our membership. We always welcome your feedback and participation as we strive to continuously improve the group.   Special thanks to our group member, Zack Weiner, for helping us find this new location.   For more details and to register please visit: http://www.fladotnet.com/Reg.aspx?EventID=536   Hope to see you all there.   --Sam Abraham & Venkat Subramanian Site Directors – West Palm Beach .Net User Group

    Read the article

  • Opinion on LastPass's security for the Average Joe [closed]

    - by Rook
    This is borderline on objective/subjective, but I'm posting it here since I'm more interested in objective facts, without going into too much technical details, than I am in user reviews of LastPass. I've always used offline ways for (password / sensitive data) storage, but lately I keep hearing good things about LastPass. Indeed, it is more practical having it always accessible from every computer you're using without syncing and related problems, but the security aspect still troubles me. How (in a nutshell for dummies) does LastPass keep your data secure / can their employees see your data, and what is your opinion for such storage of more than usual keeping of sensitive data (bank PIN codes, some financial / business related stuff and so on - you know, the things that would practically hurt if lost / phished)? What are your opinions of it, and do you trust it for such? Any bad experiences? If someone for example is sniffing your wifi network, would such data be easier than usual to sniff out?

    Read the article

  • Explain why folder's permissions differ depending on HOW user is accessing server AFP vs SSH

    - by Meltemi
    Hoping someone can explain what is probably fairly obvious...but confuses me. Imagine two users with admin privileges on our server (Mac OS X Server 10.5). Call them joe & bob. both users are members of these groups: Staff Group ID: 20 Workgroup Group ID: 1025 Shared folder "devfolder" has sharing set as so: POSIX: Owner: joe read & write Group: admin read & write Other no access ACL: Workgroup Allow Read & write Question is why when looking at same folder does the ownership appear to change depending on who's doing the looking?!? Both looking at same folder on the server: From Joe's perspective: xserve:devfolder joe$ ls -l drwxrwxr-x 6 joe workgroup 204 May 20 19:32 app drwxrwxr-x 9 joe workgroup 306 May 20 19:32 config drwxrwxr-x 3 joe workgroup 102 May 20 19:32 db drwxrwxr-x 3 joe workgroup 102 May 20 19:32 doc drwxrwxr-x 3 joe workgroup 102 May 20 19:32 lib And from Bob's perspective (folder mounted on his machine via AFP): bobmac:devfolder bob$ ls -l drwxrwxr-x 6 bob _bob 264 May 20 19:32 app drwxrwxr-x 9 bob _bob 264 May 20 19:32 config drwxrwxr-x 3 bob _bob 264 May 20 19:32 db drwxrwxr-x 3 bob _bob 264 May 20 19:32 doc drwxrwxr-x 3 bob _bob 264 May 20 19:32 lib Now if Bob connects to server via SSH then his output is identical to Joe's, as expected. Can anyone tell me what the client is doing in this case and what should be expected when bob creates or updates files in this folder? What tools do I have to better understand this from the command line? Is this normal? Perhaps a "cleaner" way that wouldn't be confusing with "bob _bob"?!?

    Read the article

  • Objects with permissions assigned by django-guardian not visible in admin

    - by jul
    I'm using django-guardian in order to manage per object permission. For a given user I give permission all permission on one object: joe = User.objects.get(username="joe") mytask = Task.objects.get(pk=1) assign('add_task', joe, mytask) assign('change_task', joe, mytask) assign('delete_task', joe, mytask) and I get, as expected: In [57]: joe.has_perm("add_task", mytask) Out[57]: True In [58]: joe.has_perm("change_task", mytask) Out[58]: True In [59]: joe.has_perm("delete_task", mytask) Out[59]: True In admin.py I also make TaskAdmin inherit from GuardedModelAdmin instead of admin.ModelAdmin Now when I connect to my site with joe, on the admin I get: You don't have permission to edit anything Am I not supposed to be able to edit the object mytask? Do I have to set some permissions using the built-in model-based permission system? Am I missing anything? Thank you

    Read the article

  • SEO - Delimiter character for page title

    - by cept0
    I have noticed a few oddities recently with the titles of web pages in SERPs. However, it seems there are several main conventions: Contact Page - Joe Schmoe's Awesome Site // - Hyphen Contact Page — Joe Schmoe's Awesome Site // — Em dash Contact Page | Joe Schmoe's Awesome Site // | Vertical bar Contact Page « Joe Schmoe's Awesome Site // « Left double angle quotes Is there any reason to use one over the other?

    Read the article

  • ????????·???

    - by katsumii
    ???????????????????? ?????5????????????????????? ?????????K???????????????SQL?????Celko?????????????????????????????????????????Joe Celko - Wikipedia, the free encyclopediaHe has participated on the ANSI X3H2 Database Standards Committee, and helped write the SQL-89 and SQL-92 standards.???NoSQL????????????Joe Celko's Complete Guide to NoSQL: What Every SQL Professional Needs to Know about Non-Relational Databases: Joe Celko: 9780124071926: Amazon.com: BooksPublication Date: October 31, 2013???????????????????3??????????Amazon.co.jp: ???·????????????SQL ?4? ???·????Joe Celko? ??? (2013/5/24)  

    Read the article

  • Craftsmanship is ALL that Matters

    - by Wayne Molina
    Today, I'm going to talk about a touchy subject: the notion of working in a company that doesn't use the prescribed "best practices" in its software development endeavours.  Over the years I have, using a variety of pseudonyms, asked this question on popular programming forums.  Although I always add in some minor variation of the story to avoid suspicion that it's the same person posting, the crux of the tale remains the same: A Programmer’s Tale A junior software developer has just started a new job at an average company, creating average line-of-business applications for internal use (the most typical scenario programmers find themselves in).  This hypothetical newbie has spent a lot of time reading up on the "theory" of software development, devouring books, blogs and screencasts from well-known and respected software developers in the community in order to broaden his knowledge and "do what the pros do".  He begins his new job, eager to apply what he's learned on a real-world project only to discover that his new teammates doesn't use any of those concepts and techniques.  They hack their way through development, or in a best-case scenario use some homebrew, thrown-together semblance of a framework for their applications that follows not one of the best practices suggested by the “elite” in the software community - things like TDD (TDD as a "best practice" is the only subjective part of this post, but it's included here due to a very large following of respected developers who consider it one), the SOLID principles, well-known and venerable tools, even version control in a worst case and truly nightmarish scenario.  Our protagonist is frustrated that he isn't doing things the "proper" way - a way he's spent personal time digesting and learning about and, more importantly, a way that some of the top developers in the industry advocate - and turns to a forum to ask the advice of his peers. Invariably the answer I, in the guise of the concerned newbie, will receive is that A) I don't know anything and should just shut my mouth and sling code the bad way like everybody else on the team, and B) These "best practices" are fade or a joke, and the only thing that matters is shipping software to your customers. I am here today to say that anyone who says this, or anything like it, is not only full of crap but indicative of exactly the type of “developer” that has helped to give our industry a bad name.  Here is why: One Who Knows Nothing, Understands Nothing On one hand, you have the cognoscenti of the .NET development world.  Guys like James Avery, Jeremy Miller, Ayende Rahien and Rob Conery; all well-respected and noted programmers that are pretty much our version of celebrities.  These guys write blogs, books, and post videos outlining the "correct" way of writing software to make sure it not only works but is maintainable and extensible and a joy to work with.  They tout the virtues of the SOLID principles, or of using TDD/BDD, or using a mature ORM like NHibernate, Subsonic or even Entity Framework. On the other hand, you have Joe Everyman, Lead Software Developer at Initrode Corporation - in our hypothetical story Joe is the junior developer's new boss.  Joe's been with Initrode for 10 years, starting as the company’s very first programmer and over the years building up a little fiefdom of his own until at the present he’s in charge of all Initrode’s software development.  Joe writes code the same way he always has, without bothering to learn much, if anything.  He looked at NHibernate once and found it was "too hard", so he uses a primitive implementation of the TableDataGateway pattern as a wrapper around SqlClient.SqlConnection and SqlClient.SqlCommand instead of an actual ORM (or, in a better case scenario, has created his own ORM); the thought of using LINQ or Entity Framework or really anything other than his own hastily homebrew solution has never occurred to him.  He doesn't understand TDD and considers “testing” to be using the .NET debugger to step through code, or simply loading up an app and entering some values to see if it works.  He doesn't really understand SOLID, and he doesn't care to.  He's worked as a programmer for years, and that's all that counts.  Right?  WRONG. Who would you rather trust?  Someone with years of experience and who writes books, creates well-known software and is akin to a celebrity, or someone with no credibility outside their own minute environment who throws around their clout and company seniority as the "proof" of their ability?  Joe Everyman may have years of experience at Initrode as a programmer, and says to do things "his way" but someone like Jeremy Miller or Ayende Rahien have years of experience at companies just like Initrode, THEY know ten times more than Joe Everyman knows or could ever hope to know, and THEY say to do things "this way". Here's another way of thinking about it: If you wanted to get into politics and needed advice on the best way to do it, would you rather listen to the mayor of Hicktown, USA or Barack Obama?  One is a small-time nobody while the other is very well-known and, as such, would probably have much more accurate and beneficial advice. NOTE: The selection of Barack Obama as an example in no way, shape, or form suggests a political affiliation or political bent to this post or blog, and no political innuendo should be mistakenly read from it; the intent was merely to compare a small-time persona with a well-known persona in a non-software field.  Feel free to replace the name "Barack Obama" with any well-known Congressman, Senator or US President of your choice. DIY Considered Harmful I will say right now that the homebrew development environment is the WORST one for an aspiring programmer, because it relies on nothing outside it's own little box - no useful skill outside of the small pond.  If you are forced to use some half-baked, homebrew ORM created by your Director of Software, you are not learning anything valuable you can take with you in the future; now, if you plan to stay at Initrode for 10 years like Joe Everyman, this is fine and dandy.  However if, like most of us, you want to advance your career outside a very narrow space you will do more harm than good by sticking it out in an environment where you, to be frank, know better than everybody else because you are aware of alternative and, in almost most cases, better tools for the job.  A junior developer who understands why the SOLID principles are good to follow, or why TDD is beneficial, or who knows that it's better to use NHibernate/Subsonic/EF/LINQ/well-known ORM versus some in-house one knows better than a senior developer with 20 years experience who doesn't understand any of that, plain and simple.  Anyone who disagrees is either a liar, or someone who, just like Joe Everyman, Lead Developer, relies on seniority and tenure rather than adapting their knowledge as things evolve. In many cases, the Joe Everymans of the world act this way out of fear - they cannot possibly fathom that a “junior” could know more than them; after all, they’ve spent 10 or more years in the same company, doing the same job, cranking out the same shoddy software.  And here comes a newbie who hasn’t spent 10+ years doing the same things, with a fresh and often radical take on the craft, and Joe Everyman is afraid he might have to put some real effort into his career again instead of just pointing to his 10 years of service at Initrode as “proof” that he’s good, or that he might have to learn something new to improve; in most cases the problem is Joe Everyman, and by extension Initrode itself, has a mentality of just being “good enough”, and mediocrity is the rule of the day. A Thorn Bush is No Place for a Phoenix My advice is that if you work on a team where they don't use the best practices that some of the most famous developers in our field say is the "right" way to do things (and have legions of people who agree), and YOU are aware of these practices and can see why they work, then LEAVE the company.  Find a company where they DO care about quality, and craftsmanship, otherwise you will never be happy.  There is no point in "dumbing" yourself down to the level of your co-workers and slinging code without care to craftsmanship.  In 95% of these situations there will be no point in bringing it to the attention of Joe Everyman because he won't listen; he might even get upset that someone is trying to "upstage" him and fire the newbie, and replace someone with loads of untapped potential with a drone that will just nod affirmatively and grind out the tasks assigned without question. Find a company that has people smart enough to listen to the "best and brightest", and be happy.  Do not, I repeat, DO NOT waste away in a job working for ignorant people.  At the end of the day software development IS a craft, and a level of craftsmanship is REQUIRED for any serious professional.  When you have knowledgeable people with the credibility to back it up saying one thing, and small-time people who are, to put it bluntly, nobodies in the field saying and doing something totally different because they can't comprehend it, leave the nobodies to their own devices to fade into obscurity.  Work for a company that uses REAL software engineering techniques and really cares about craftsmanship.  The biggest issue affecting our career, and the reason software development has never been the respected, white-collar career it was meant to be, is because hacks and charlatans can pass themselves off as professional programmers without following a lick of good advice from programmers much better at the craft than they are.  These modern day snake-oil salesmen entrench themselves in companies by hoodwinking non-technical businesspeople and customers with their shoddy wares, end up in senior/lead/executive positions, and push their lack of knowledge on everybody unfortunate enough to work with/for/under them, crushing any dissent or voices of reason and change under their tyrannical heel and leaving behind a trail of dismayed and, often, unemployed junior developers who were made examples of to keep up the facade and avoid the shadow of doubt being cast upon them. To sum this up another way: If you surround yourself with learned people, you will learn.  Surround yourself with ignorant people who can't, as the saying goes, see the forest through the trees, and you'll learn nothing of any real value.  There is more to software development than just writing code, and the end goal should not be just "shipping software", it should be shipping software that is extensible, maintainable, and above all else software whose creation has broadened your knowledge in some capacity, even if a minor one.  An eager newbie who knows theory and thirsts for knowledge can easily be moulded and taught the advanced topics, but the same can't be said of someone who only cares about the finish line.  This industry needs more people espousing the benefits of software craftsmanship and proper software engineering techniques, and less Joe Everymans who are unwilling to adapt or foster new ways of thinking. Conclusion - I Cast “Protection from Fire” I am fairly certain this post will spark some controversy and might even invite the flames.  Please keep in mind these are opinions and nothing more.  A little healthy rant and subsequent flamewar can be good for the soul once in a while.  To paraphrase The Godfather: It helps to get rid of the bad blood.

    Read the article

  • Advice on database design / SQL for retrieving data with chronological order

    - by Remnant
    I am creating a database that will help keep track of which employees have been on a certain training course. I would like to get some guidance on the best way to design the database. Specifically, each employee must attend the training course each year and my database needs to keep a history of all the dates on which they have attend the course in the past. The end user will use the software as a planning tool to help them book future course dates for employees. When they select a given employee they will see: (a) Last attendance date (b) Projected future attendance date(i.e. last attendance date + 1 calendar year) In terms of my database, any given employee may have multiple past course attendance dates: EmpName AttandanceDate Joe Bloggs 1st Jan 2007 Joe Bloggs 4th Jan 2008 Joe Bloggs 3rd Jan 2009 Joe Bloggs 8th Jan 2010 My question is what is the best way to set up the database to make it easy to retrieve the most recent course attendance date? In the example above, the most recent would be 8th Jan 2010. Is there a good way to use SQL to sort by date and pick the MAX date? My other idea was to add a column called ‘MostRecent’ and just set this to TRUE. EmpName AttandanceDate MostRecent Joe Bloggs 1st Jan 2007 False Joe Bloggs 4th Jan 2008 False Joe Bloggs 3rd Jan 2009 False Joe Bloggs 8th Jan 2010 True I wondered if this would simplify the SQL i.e. SELECT Joe Bloggs WHERE MostRecent = ‘TRUE’ Also, when the user updates a given employee’s attendance record (i.e. with latest attendance date) I could use SQL to: Search for the employee and set the MostRecent value to FALSE Add a new record with MostRecent set to TRUE? Would anybody recommended either method over the other? Or do you have a completely different way of solving this problem?

    Read the article

  • Quotas - Using quotas on ZFSSA shares and projects and users

    - by Steve Tunstall
    So you don't want your users to fill up your entire storage pool with their MP3 files, right? Good idea to make some quotas. There's some good tips and tricks here, including a helpful workflow (a script) that will allow you to set a default quota on all of the users of a share at once. Let's start with some basics. I mad a project called "small" and inside it I made a share called "Share1". You can set quotas on the project level, which will affect all of the shares in it, or you can do it on the share level like I am here. Go the the share's General property page. First, I'm using a Windows client, so I need to make sure I have my SMB mountpoint. Do you know this trick yet? Go to the Protocol page of the share. See the SMB section? It needs a resource name to make the UNC path for the SMB (Windows) users. You do NOT have to type this name in for every share you make! Do this at the Project level. Before you make any shares, go to the Protocol properties of the Project, and set the SMB Resource name to "On". This special code will automatically make the SMB resource name of every share in the project the same as the share name. Note the UNC path name I got below. Since I did this at the Project level, I didn't have to lift a finger for it to work on every share I make in this project. Simple. So I have now mapped my Windows "Z:" drive to this Share1. I logged in as the user "Joe". Note that my computer shows my Z: drive as 34GB, which is the entire size of my Pool that this share is in. Right now, Joe could fill this drive up and it would fill up my pool.  Now, go back to the General properties of Share1. In the "Space Usage" area, over on the right, click on the "Show All" text under the Users & Groups section. Sure enough, Joe and some other users are in here and have some data. Note this is also a handy window to use just to see how much space your users are using in any given share.  Ok, Joe owes us money from lunch last week, so we want to give him a quota of 100MB. Type his name in the Users box. Notice how it now shows you how much data he's currently using. Go ahead and give him a 100M quota and hit the Apply button. If I go back to "Show All", I can see that Joe now has a quota, and no one else does. Sure enough, as soon as I refresh my screen back on Joe's client, he sees that his Z: drive is now only 100MB, and he's more than half way full.  That was easy enough, but what if you wanted to make the whole share have a quota, so that the share itself, no matter who uses it, can only grow to a certain size? That's even easier. Just use the Quota box on the left hand side. Here, I use a Quota on the share of 300MB.  So now I log off as Joe, and log in as Steve. Even though Steve does NOT have a quota, it is showing my Z: drive as 300MB. This would effect anyone, INCLUDING the ROOT user, becuase you specified the Quota to be on the SHARE, not on a person.  Note that back in the Share, if you click the "Show All" text, the window does NOT show Steve, or anyone else, to have a quota of 300MB. Yet we do, because it's on the share itself, not on any user, so this panel does not see that. Ok, here is where it gets FUN.... Let's say you do NOT want a quota on the SHARE, because you want SOME people, like Root and yourself, to have FULL access to it and you want the ability to fill the whole thing up if you darn well feel like it. HOWEVER, you want to give the other users a quota. HOWEVER you have, say, 200 users, and you do NOT feel like typing in each of their names and giving them each a quota, and they are not all members of a AD global group you could use or anything like that.  Hmmmmmm.... No worries, mate. We have a handy-dandy script that can do this for us. Now, this script was written a few years back by Tim Graves, one of our ZFSSA engineers out of the UK. This is not my script. It is NOT supported by Oracle support in any way. It does work fine with the 2011.1.4 code as best as I can tell, but Oracle, and I, are NOT responsible for ANYTHING that you do with this script. Furthermore, I will NOT give you this script, so do not ask me for it. You need to get this from your local Oracle storage SC. I will give it to them. I want this only going to my fellow SCs, who can then work with you to have it and show you how it works.  Here's what it does...Once you add this workflow to the Maintenance-->Workflows section, you click it once to run it. Nothing seems to happen at this point, but something did.   Go back to any share or project. You will see that you now have four new, custom properties on the bottom.  Do NOT touch the bottom two properties, EVER. Only touch the top two. Here, I'm going to give my users a default quota of about 40MB each. The beauty of this script is that it will only effect users that do NOT already have any kind of personal quota. It will only change people who have no quota at all. It does not effect the Root user.  After I hit Apply on the Share screen. Nothing will happen until I go back and run the script again. The first time you run it, it creates the custom properties. The second and all subsequent times you run it, it checks the shares for any users, and applies your quota number to each one of them, UNLESS they already have one set. Notice in the readout below how it did NOT apply to my Joe user, since Joe had a quota set.  Sure enough, when I go back to the "Show All" in the share properties, all of the users who did not have a quota, now have one for 39.1MB. Hmmm... I did my math wrong, didn't I?    That's OK, I'll just change the number of the Custom Default quota again. Here, I am adding a zero on the end.  After I click Apply, and then run the script again, all of my users, except Joe, now have a quota of 391MB  You can customize a person at any time. Here, I took the Steve user, and specifically gave him a Quota of zero. Now when I run the script again, he is different from the rest, so he is no longer effected by the script. Under Show All, I see that Joe is at 100, and Steve has no Quota at all. I can do this all day long. es, you will have to re-run the script every time new users get added. The script only applies the default quota to users that are present at the time the script is ran. However, it would be a simple thing to schedule the script to run each night, or to make an alert to run the script when certain events occur.  For you power users, if you ever want to delete these custom properties and remove the script completely, you will find these properties under the "Schema" section under the Shares section. You can remove them here. There's no need to, however, they don't hurt a thing if you just don't use them.  I hope these tips have helped you out there. Quotas can be fun. 

    Read the article

  • Why can I resolve this hostname but not a cname to this hostname?

    - by Joe Hopfgartner
    if a run dig against a hostname, i get the according cname, however i get an NXDOMAIN error (non existent domain). if i run dig against the cname i got, I can resolve it to an IP address successfully. It is reproduceable. On the system I am currently on it is always the case, on other systems it sometimes works and sometimes not, and on other systems it seems to work all the time. If i run using a nameserver i specify (for example googles public nameserver) i can successfully resolve the hostname. i would just blame the local system, but it seems i am not having the only one problems the 2nd domain (unrestrict.me) is hosted on amazon route 53 nameservers. the 1st one on another dns server which has proofen to be fully functional and reliable over the years. i once switchted with the other domain to amazon dns as well, everything seemed to work, also various dns health check tests reported fine, however i recieved a lot of support tickets that dns resolution would not work. is amazon just "bad" or am i doing something wrong? i did not tamper with the domain in any way on the local system (in case of caching or making a custom dns view or whatever...) joe@joe:~$ dig scorpion.premiumize.me ; <<>> DiG 9.8.1-P1 <<>> scorpion.premiumize.me ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NXDOMAIN, id: 10222 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;scorpion.premiumize.me. IN A ;; ANSWER SECTION: scorpion.premiumize.me. 180 IN CNAME alpha.nue.scorpion.unrestrict.me. ;; Query time: 28 msec ;; SERVER: 127.0.0.1#53(127.0.0.1) ;; WHEN: Mon Jun 18 10:28:39 2012 ;; MSG SIZE rcvd: 84 joe@joe:~$ dig alpha.nue.scorpion.unrestrict.me ; <<>> DiG 9.8.1-P1 <<>> alpha.nue.scorpion.unrestrict.me ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 25381 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;alpha.nue.scorpion.unrestrict.me. IN A ;; ANSWER SECTION: alpha.nue.scorpion.unrestrict.me. 300 IN A 78.46.25.130 ;; Query time: 48 msec ;; SERVER: 127.0.0.1#53(127.0.0.1) ;; WHEN: Mon Jun 18 10:28:47 2012 ;; MSG SIZE rcvd: 66 joe@joe:~$

    Read the article

  • Attempting to extract a pattern within a string

    - by Brian
    I'm attempting to extract a given pattern within a text file, however, the results are not 100% what I want. Here's my code: import java.util.regex.Matcher; import java.util.regex.Pattern; public class ParseText1 { public static void main(String[] args) { String content = "<p>Yada yada yada <code> foo ddd</code>yada yada ...\n" + "more here <2004-08-24> bar<Bob Joe> etc etc\n" + "more here again <2004-09-24> bar<Bob Joe> <Fred Kej> etc etc\n" + "more here again <2004-08-24> bar<Bob Joe><Fred Kej> etc etc\n" + "and still more <2004-08-21><2004-08-21> baz <John Doe> and now <code>the end</code> </p>\n"; Pattern p = Pattern .compile("<[1234567890]{4}-[1234567890]{2}-[1234567890]{2}>.*?<[^%0-9/]*>", Pattern.MULTILINE); Matcher m = p.matcher(content); // print all the matches that we find while (m.find()) { System.out.println(m.group()); } } } The output I'm getting is: <2004-08-24> bar<Bob Joe> <2004-09-24> bar<Bob Joe> <Fred Kej> <2004-08-24> bar<Bob Joe><Fred Kej> <2004-08-21><2004-08-21> baz <John Doe> and now <code> The output I want is: <2004-08-24> bar<Bob Joe> <2004-08-24> bar<Bob Joe> <2004-08-24> bar<Bob Joe> <2004-08-21> baz <John Doe> In short, the sequence of "date", "text (or blank)", and "name" must be extracted. Everything else should be avoided. For example the tag "Fred Kej" did not have any "date" tag before it, therefore, it should be flagged as invalid. Also, as a side question, is there a way to store or track the text snippets that were skipped/rejected as were the valid texts. Thanks, Brian

    Read the article

  • Permissions issue Mac OS X Client -> Mac OS X Server

    - by Meltemi
    I can't get access to a folder on our server and can't understand why. Perhaps someone will see what I'm overlooking... Trouble accessing /Library/Subdirectory/NextDirectory/ User joe can ssh to the server just fine and cd to /Library/Subdirectory/ however trying to cd into the next folder, NextDirectory, gives this error: -bash: cd: NextDirectory/: Permission denied both username joe & bill are members of the group admin and both can get INTO Subdirectory without any trouble... hostname:Library joe$ ls -l | grep Subdirectory drwxrwxr-x 3 bill admin 102 Jun 1 14:51 Subdirectory and from w/in the Subversion folder hostname:Subdirectory joe$ ls -l drwxrwx--- 5 root admin 170 Jun 1 22:19 NextDirectory bill can cd into NextDirectory but joe cannot!?! What am I overlooking? What tools do we have to troubleshoot this? thanks!

    Read the article

  • Show #14 DotNetNuke 5.6.1, Razor/Webmatrix and WebCamps

    - by Chris Hammond
    Once again, it’s been far too long since the last show, this time just over 4 months, For Show #14 I am joined by Joe Brinkman. Take a listen and see what has been going on in the DNN world. Length: 47:56 Size: 43.8mb MP3 Download Welcome back to DNNVoice Welcome to guest Joe Brinkman ( http://blog.theaccidentalgeek.com/ ) Introduction to Joe and Welcome back from Chris Hammond ( http://www.chrishammond.com ) and what he's been doing DotNetNuke Training Free Extensions Module Development Templates...(read more)

    Read the article

  • Cucumber failed scenarios not providing details (Ubuntu)

    - by user361646
    When I run cucumber from my Ubuntu server I don't get details on why the scenario is failing. For example here is what I get: ..... cucumber features/messaging.feature:6 # Scenario: Joe can view his inbox cucumber features/messaging.feature:14 # Scenario: Joe can send a message cucumber features/messaging.feature:26 # Scenario: Joe can view a message in his inbox cucumber features/messaging.feature:35 # Scenario: Joe can reply to a message ..... Is there something I need to configure or pass to the cucumber command to see the details of the failed scenarios??

    Read the article

  • Using the apostrophe for PHP associative array element's name

    - by Haskella
    Hi I've been trying to figure out how to put something like Joe's Fruits into a PHP array something like this: <?php $arr = array( 'Fruitland' => '3ddlskdf3', 'Joe's Fruits' => 'dddfdfer3', ); ?> Using the above for example (stackoverflow's code color should tell you this by now), the array will take it as 'Joe' between the two apostrophes instead of the whole 'Joe's Fruits' is there any way I can do this without just calling it 'Joes Fruits'?

    Read the article

  • can not connect through SCP, but SSH connections works

    - by Joe Cabezas
    i am trying to connect to my server to transfer file using scp: $ scp -v -r -P <port> <user>@<host>:~/dir/ dir/ this is the output: OpenSSH_5.2p1, OpenSSL 0.9.8r 8 Feb 2011 debug1: Reading configuration data /Users/joe/.ssh/config debug1: Reading configuration data /etc/ssh_config debug1: Connecting to <host> [<host>] port <port>. debug1: Connection established. debug1: identity file /Users/joe/.ssh/identity type -1 debug1: identity file /Users/joe/.ssh/id_rsa type -1 debug1: identity file /Users/joe/.ssh/id_dsa type -1 ssh_exchange_identification: Connection closed by remote host but connecting via SSH works fine: $ ssh <user>@<host> -p <port> <user>@<host>'s password: <user>@<host>:~$ OK what can be wrong with this? my /etc/ssh/sshd_config file on the host is: # Package generated configuration file # See the sshd_config(5) manpage for details # What ports, IPs and protocols we listen for Port <port> # Use these options to restrict which interfaces/protocols sshd will bind to #ListenAddress :: #ListenAddress 0.0.0.0 Protocol 2 # HostKeys for protocol version 2 HostKey /etc/ssh/ssh_host_rsa_key HostKey /etc/ssh/ssh_host_dsa_key HostKey /etc/ssh/ssh_host_ecdsa_key #Privilege Separation is turned on for security UsePrivilegeSeparation yes # Lifetime and size of ephemeral version 1 server key KeyRegenerationInterval 3600 ServerKeyBits 768 # Logging SyslogFacility AUTH LogLevel INFO # Authentication: LoginGraceTime 120 PermitRootLogin yes StrictModes yes RSAAuthentication yes PubkeyAuthentication no #AuthorizedKeysFile %h/.ssh/authorized_keys # Don't read the user's ~/.rhosts and ~/.shosts files IgnoreRhosts yes # For this to work you will also need host keys in /etc/ssh_known_hosts RhostsRSAAuthentication no # similar for protocol version 2 HostbasedAuthentication no # Uncomment if you don't trust ~/.ssh/known_hosts for RhostsRSAAuthentication #IgnoreUserKnownHosts yes # To enable empty passwords, change to yes (NOT RECOMMENDED) PermitEmptyPasswords no # Change to yes to enable challenge-response passwords (beware issues with # some PAM modules and threads) ChallengeResponseAuthentication no # Change to no to disable tunnelled clear text passwords #PasswordAuthentication yes # Kerberos options #KerberosAuthentication no #KerberosGetAFSToken no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes # GSSAPI options #GSSAPIAuthentication no #GSSAPICleanupCredentials yes X11Forwarding yes X11DisplayOffset 10 PrintMotd no PrintLastLog yes TCPKeepAlive yes #UseLogin no #MaxStartups 10:30:60 #Banner /etc/issue.net # Allow client to pass locale environment variables AcceptEnv LANG LC_* Subsystem sftp /usr/lib/openssh/sftp-server # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will # be allowed through the ChallengeResponseAuthentication and # PasswordAuthentication. Depending on your PAM configuration, # PAM authentication via ChallengeResponseAuthentication may bypass # the setting of "PermitRootLogin without-password". # If you just want the PAM account and session checks to run without # PAM authentication, then enable this but set PasswordAuthentication # and ChallengeResponseAuthentication to 'no'. UsePAM yes

    Read the article

  • DNSBL listed at zen.spamhaus.org - cant get outgoing mail working? Am I interpreting the response correctly?

    - by Joe Hopfgartner
    I have problem with a mailserver and there is something I kind of not understand! I can connect, authenticate, specify the sender address - but when specifying the reciever i get a error 550 which looks like so: RCPT TO:[email protected] 550-DNSBL listed at zen.spamhaus.org 550 http://www.spamhaus.org/query/bl?ip=62.178.15.161 Now the strange thing is that 62.178.15.161 is my local client address. Not the servers ip address. Also the error code 550 seems to be defined as so: 550 Requested action not taken: mailbox unavailable To me that makes totally no sense. Why this error code with this spamhaus message? Why the local ip adress and not the servers? There is exim running and there is nothing turning up in the logs mail.err mail.info mail.log mail.warn in /var/log I looked up both the servers and the clients ip adress on blacklists. The clients ip adress is listed on some (as expected), but the server is totally clean. Here is the complete telnet log when I reproduced the error. Mail clients like Evolution and Thunderbird give me the same spamhaus error message. joe@joe-desktop:~$ telnet mail.hunsynth.org 25 Trying 193.164.132.42... Connected to mail.hunsynth.org. Escape character is '^]'. 220 hunsynth.org ESMTP Exim 4.69 Sat, 01 Jan 2011 17:52:45 +0100 HELP 214-Commands supported: 214 AUTH STARTTLS HELO EHLO MAIL RCPT DATA NOOP QUIT RSET HELP EHLO AUTH 250-hunsynth.org Hello chello062178015161.6.11.univie.teleweb.at [62.178.15.161] 250-SIZE 52428800 250-PIPELINING 250-AUTH PLAIN LOGIN CRAM-MD5 250-STARTTLS 250 HELP AUTH LOGIN 334 VXNlcm5hbWU6 dGVzdEBodW5zeW50aC5vcmc= 334 UGFzc3dvcmQ6 ***** 235 Authentication succeeded MAIL FROM:[email protected] 250 OK RCPT TO:[email protected] 550-DNSBL listed at zen.spamhaus.org 550 http://www.spamhaus.org/query/bl?ip=62.178.15.161 quit 221 hunsynth.org closing connection Connection closed by foreign host. joe@joe-desktop:~$ Update: I tried the same thing from my other server and could successfully send an email. So it really looks like the server does check the IP wich establiches the connection is in some blacklist. This is theoretically a good thing - but - the authentication on the server should prevent that? Or shouldn't it? Well I just think it would be absurd if I couldn't send email over my smtp server from my dynamic ISP connection because the dynamic is listed, altough i have a clean server with login?

    Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >