Search Results

Search found 6035 results on 242 pages for 'longer'.

Page 1/242 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Where to buy longer PC cables online?

  - by jasondavis

  I am planning to build a new PC soon that will need almost all of it's cables to be extended or longer then noirmal cables to reach including, Longer cables for my 3-4 monitors to reach my PC to where they are mounted on my desk Longer USB cables for mouse and other USB items Probably other longer cables Is there some good online stores to buy longer versions or normal cables used for most PC's?

  Read the article

• rdiff-backup is taking longer and longer every time it runs

  - by Jakobud

  I've been running rdiff-backup for the past week or so, every night at 4am. It started out not taking that long, but its taking longer and longer and longer every time its runs every night. In some cases there are quite a few new and changed files and in other cases, not so much. It started out taking < 10 minutes, and after a week its taking over 4.5 hrs to run. Take a look at my session stats below: StartTime 1268046002.00 (Mon Mar 8 04:00:02 2010) EndTime 1268046373.50 (Mon Mar 8 04:06:13 2010) ElapsedTime 371.50 (6 minutes 11.50 seconds) SourceFiles 213928 SourceFileSize 277271282225 (258 GB) MirrorFiles 213914 MirrorFileSize 276693097638 (258 GB) NewFiles 16 NewFileSize 578209911 (551 MB) DeletedFiles 2 DeletedFileSize 2598 (2.54 KB) ChangedFiles 27 ChangedSourceSize 5195150 (4.95 MB) ChangedMirrorSize 5217876 (4.98 MB) IncrementFiles 0 IncrementFileSize 0 (0 bytes) TotalDestinationSizeChange 578184587 (551 MB) Errors 0 StartTime 1268132402.00 (Tue Mar 9 04:00:02 2010) EndTime 1268134341.29 (Tue Mar 9 04:32:21 2010) ElapsedTime 1939.29 (32 minutes 19.29 seconds) SourceFiles 213963 SourceFileSize 307959842562 (287 GB) MirrorFiles 213928 MirrorFileSize 277271282225 (258 GB) NewFiles 37 NewFileSize 31265005547 (29.1 GB) DeletedFiles 2 DeletedFileSize 576511960 (550 MB) ChangedFiles 25 ChangedSourceSize 5243761 (5.00 MB) ChangedMirrorSize 5177011 (4.94 MB) IncrementFiles 65 IncrementFileSize 577266412 (551 MB) TotalDestinationSizeChange 31265826749 (29.1 GB) Errors 0 StartTime 1268218802.00 (Wed Mar 10 04:00:02 2010) EndTime 1268225230.15 (Wed Mar 10 05:47:10 2010) ElapsedTime 6428.15 (1 hour 47 minutes 8.15 seconds) SourceFiles 213971 SourceFileSize 307960643843 (287 GB) MirrorFiles 213963 MirrorFileSize 307959842562 (287 GB) NewFiles 9 NewFileSize 694087 (678 KB) DeletedFiles 1 DeletedFileSize 894 (894 bytes) ChangedFiles 38 ChangedSourceSize 30656167797 (28.6 GB) ChangedMirrorSize 30656059709 (28.6 GB) IncrementFiles 48 IncrementFileSize 289278151 (276 MB) TotalDestinationSizeChange 290079432 (277 MB) Errors 0 StartTime 1268305202.00 (Thu Mar 11 04:00:02 2010) EndTime 1268312788.15 (Thu Mar 11 06:06:28 2010) ElapsedTime 7586.15 (2 hours 6 minutes 26.15 seconds) SourceFiles 213971 SourceFileSize 307960643779 (287 GB) MirrorFiles 213971 MirrorFileSize 307960643843 (287 GB) NewFiles 0 NewFileSize 0 (0 bytes) DeletedFiles 0 DeletedFileSize 0 (0 bytes) ChangedFiles 15 ChangedSourceSize 30650824127 (28.5 GB) ChangedMirrorSize 30650824191 (28.5 GB) IncrementFiles 16 IncrementFileSize 689437042 (657 MB) TotalDestinationSizeChange 689436978 (657 MB) Errors 0 StartTime 1268391601.00 (Fri Mar 12 04:00:01 2010) EndTime 1268400145.85 (Fri Mar 12 06:22:25 2010) ElapsedTime 8544.85 (2 hours 22 minutes 24.85 seconds) SourceFiles 213974 SourceFileSize 307960784445 (287 GB) MirrorFiles 213971 MirrorFileSize 307960643779 (287 GB) NewFiles 5 NewFileSize 269587 (263 KB) DeletedFiles 2 DeletedFileSize 128921 (126 KB) ChangedFiles 16 ChangedSourceSize 30650815948 (28.5 GB) ChangedMirrorSize 30650815948 (28.5 GB) IncrementFiles 26 IncrementFileSize 818279963 (780 MB) TotalDestinationSizeChange 818420629 (781 MB) Errors 0 StartTime 1268478002.00 (Sat Mar 13 04:00:02 2010) EndTime 1268488740.33 (Sat Mar 13 06:59:00 2010) ElapsedTime 10738.33 (2 hours 58 minutes 58.33 seconds) SourceFiles 213974 SourceFileSize 307960784238 (287 GB) MirrorFiles 213974 MirrorFileSize 307960784445 (287 GB) NewFiles 0 NewFileSize 0 (0 bytes) DeletedFiles 0 DeletedFileSize 0 (0 bytes) ChangedFiles 16 ChangedSourceSize 30650823920 (28.5 GB) ChangedMirrorSize 30650824127 (28.5 GB) IncrementFiles 19 IncrementFileSize 1041846015 (994 MB) TotalDestinationSizeChange 1041845808 (994 MB) Errors 0 StartTime 1268560803.00 (Sun Mar 14 04:00:03 2010) EndTime 1268573194.82 (Sun Mar 14 07:26:34 2010) ElapsedTime 12391.82 (3 hours 26 minutes 31.82 seconds) SourceFiles 213974 SourceFileSize 307960784238 (287 GB) MirrorFiles 213974 MirrorFileSize 307960784238 (287 GB) NewFiles 0 NewFileSize 0 (0 bytes) DeletedFiles 0 DeletedFileSize 0 (0 bytes) ChangedFiles 14 ChangedSourceSize 30650815948 (28.5 GB) ChangedMirrorSize 30650815948 (28.5 GB) IncrementFiles 15 IncrementFileSize 1116911810 (1.04 GB) TotalDestinationSizeChange 1116911810 (1.04 GB) Errors 0 StartTime 1268647203.00 (Mon Mar 15 04:00:03 2010) EndTime 1268662364.88 (Mon Mar 15 08:12:44 2010) ElapsedTime 15161.88 (4 hours 12 minutes 41.88 seconds) SourceFiles 214010 SourceFileSize 307963430178 (287 GB) MirrorFiles 213974 MirrorFileSize 307960784238 (287 GB) NewFiles 37 NewFileSize 2684172 (2.56 MB) DeletedFiles 1 DeletedFileSize 5348 (5.22 KB) ChangedFiles 32 ChangedSourceSize 30656134913 (28.6 GB) ChangedMirrorSize 30656167797 (28.6 GB) IncrementFiles 71 IncrementFileSize 1316460362 (1.23 GB) TotalDestinationSizeChange 1319106302 (1.23 GB) Errors 0 StartTime 1268733603.00 (Tue Mar 16 04:00:03 2010) EndTime 1268750396.76 (Tue Mar 16 08:39:56 2010) ElapsedTime 16793.76 (4 hours 39 minutes 53.76 seconds) SourceFiles 214010 SourceFileSize 307963430156 (287 GB) MirrorFiles 214010 MirrorFileSize 307963430178 (287 GB) NewFiles 0 NewFileSize 0 (0 bytes) DeletedFiles 0 DeletedFileSize 0 (0 bytes) ChangedFiles 15 ChangedSourceSize 30650823898 (28.5 GB) ChangedMirrorSize 30650823920 (28.5 GB) IncrementFiles 16 IncrementFileSize 936032413 (893 MB) TotalDestinationSizeChange 936032391 (893 MB) Errors 0 StartTime 1268820002.00 (Wed Mar 17 04:00:02 2010) EndTime 1268834619.90 (Wed Mar 17 08:03:39 2010) ElapsedTime 14617.90 (4 hours 3 minutes 37.90 seconds) SourceFiles 214010 SourceFileSize 307963430156 (287 GB) MirrorFiles 214010 MirrorFileSize 307963430156 (287 GB) NewFiles 0 NewFileSize 0 (0 bytes) DeletedFiles 0 DeletedFileSize 0 (0 bytes) ChangedFiles 14 ChangedSourceSize 30650815948 (28.5 GB) ChangedMirrorSize 30650815948 (28.5 GB) IncrementFiles 15 IncrementFileSize 1289272860 (1.20 GB) TotalDestinationSizeChange 1289272860 (1.20 GB) Errors 0 Is this common behavior? It's only about 300gigs of data total. One important thing to note though, rdiff-backup is backup up stuff over to a USB2 external drive. Maybe thats why its so slow?

  Read the article

• When I add myself "vboxusers" group I an no longer in the "admins" group

  - by R9TySix

  I'm using Ubuntu 11.10 and I installed VirtualBox. This required me to add myself to the vboxusers group but when I add myself to vboxusers group I am no longer be in other groups and especially admins group! When I add myself back to admins group I no longer be am in the vboxusers group ! Commands that I used to add user to "vboxusers": usermod -G vboxusers myusername to add user back to admins group in single user mod: usermod -aG admin myusername

  Read the article

• Hardware Virtualization no longer required for Windows 7 XP Mode

  - by Jonathan Kehayias

  One of my frustrations in upgrading to Windows 7 last year was that Virtual PC no longer worked since I didn’t have Hardware Virtualization on my CPU.  This really drove my transition entirely to VMware Workstation on my personal laptop.  I recently reinstalled my work laptop (with permission) on Windows 7 Enterprise and figured I’d give XP Mode a look since this machine has Hardware Virtualization enabled.  I was surprised to find that Hardware Virtualization was no longer required,...(read more)

  Read the article

• Hardware Virtualization no longer required for Windows 7 XP Mode

  - by Jonathan Kehayias

  One of my frustrations in upgrading to Windows 7 last year was that Virtual PC no longer worked since I didn’t have Hardware Virtualization on my CPU.  This really drove my transition entirely to VMware Workstation on my personal laptop.  I recently reinstalled my work laptop (with permission) on Windows 7 Enterprise and figured I’d give XP Mode a look since this machine has Hardware Virtualization enabled.  I was surprised to find that Hardware Virtualization was no longer required,...(read more)

  Read the article

• HTG Explains: Why Screen Savers Are No Longer Necessary

  - by Chris Hoffman

  Screen savers are a left-over solution from a previous technology. In spite of their name, screen savers no longer “save” anything – all they do is waste electricity. Screen savers are not necessary on modern, flat-panel LCD displays. Having your computer automatically turn off its display is the new “screen saver” – it saves energy, reduces your electricity bill, and increases your battery life. Screen savers may look pretty, but they do it when no one is looking. HTG Explains: Why Screen Savers Are No Longer Necessary 6 Ways Windows 8 Is More Secure Than Windows 7 HTG Explains: Why It’s Good That Your Computer’s RAM Is Full

  Read the article

• LUKS no longer accepts my my passphrase

  - by Two Spirit

  I created a 4 drive RAID5 setup using mdadm and upgrading from 2TB drives to the new Hitachi 7200RPM 4TB drives. I can initially open my luks partition, but later can no longer access it. I can no longer access my LUKS partition even tho I have the right passphrases. It was working and then at an unknown point in time loose access to LUKS. I've used the same procedures for upgrading from 500G to 1TB to 1.5TB to 2TB. After the first time this happened a week ago, I thought maybe there was some corruption so I added a 2nd Key as a backup. After the second time the LUKS became unaccessible, none of the keys worked. I put LUKS on it using cryptsetup -c aes -s 256 -y luksFormat /dev/md0 # cryptsetup luksOpen /dev/md0 md0_crypt Enter LUKS passphrase: Enter LUKS passphrase: Enter LUKS passphrase: Command failed: No key available with this passphrase. The first time this happened while I was upgrading to 4TB drives, I thought it was a fluke, and ultimately had to recover from backups. I went an used luksAddKey to add a 2nd key as a backup. It happened again and I tried both passphrases, and neither worked. The only thing I'm doing differently this time around is that I've upgraded to 4TB drives which use GPT instead of fdisk. The last time I had to even reboot the box was over 2 years ago. I'm using ubuntu-8.04-server with kernel 2.6.24-29 and upgraded to -2.6.24-31, but that didn't fix the problem.

  Read the article

• Tool to know what is making the desktop load longer than usual

  - by Marky

  Is there such a tool? My desktop as of late is taking longer to load than usual. I'd say it takes more than 20 seconds from GDM login until I see the desktop. Aside from disabling all app-indicators and testing it manually one by one, what else should be done? The only indicator I remember activating lately was bluetooth and I have already disabled it from Startup Applications. No improvement. I know of bootchart, but I don't really have a problem with boot. It is only after I login that the issue occurs. I'm on Natty Narwhal. *Updating this thread.... The issue seems to have fixed itself and I did not even do anything. It is really weird. I guess this is how Gnome works (and talk about not recognizing your theme and reverting to Windows 95-like look. How about that?). I have been a long time KDE user and I never encountered issues like this one. The KDE then may have booted into the desktop longer (from KDM) but at least I know it was consistent.

  Read the article

• zoneminder - fewer events, longer duration?

  - by marvin

  I've got zoneminder 1.25 installed on 12.04 LTS 64 bit, and it's working fine, but seems to capure many events (modect, idle setting) with short durations. Some captures are only seconds apart, and when I watch an event, I don't see the person walk all the way through the room, sometimes it stops with them partway through. How can I make the event captures longer (so there are fewer of them, but they catch everything).

  Read the article

• Facebook Share Button and Counter no longer displaying any Count

  - by donaldthe

  Is it just me or did the Facebook Share button that displays the count of shares and likes just stop working over the past few days? The sharing still works, the count of shares no longer displays. The link that is generated look like this http://www.facebook.com/sharer.php?u= and the JavaScript file on my page is this http://static.ak.fbcdn.net/connect.php/js/FB.Share I haven't changed anything and this has worked for years

  Read the article

• Ubuntu no longer prompts for root privilege (but doesn't give it either)

  - by Elad Avron

  So on 14.04 LTS I was playing around with some settings to solve another problem, and somehow managed to screw things up and now Ubuntu no longer asks for root privileges before trying to perform administrative actions. The catch is that my user does NOT have them by default, which means those actions ALL fail. I can still run "sudo " from terminal and it'll ask for my password and work fine, but any GUI that requires root just fails without asking anything. Any ideas what I did wrong and how to solve it? Thanks in advance.

  Read the article

• When does "proper" programming no longer matter?

  - by Kai Qing

  I've been a full time programmer for about 8 years now. Web based mostly, ranging in weird jobs for clients. Never anything I "want" to do. So my experience is limited to what I've been contracted to do, having no real incentive to master anything in particular. So here's my scenario and ultimately what I wonder about... I've been building an android game in my spare time. It's using the libgdx library so quite a bit of the heavy lifting is done for me. I don't read much of the docs cause unless it's in tutorial format I will just not care, and ultimately most of my questions have already been asked on stackoverflow. I get along fine and my game works as expected... Suspiciously well, even. So much so that I wonder why one should bother to be "proper" when coding if the end result is ultimately the same. To be more specific, I used a hashtable because I wanted something close to an associative array. Human readable key values. In other places to achieve similar things, I use a vector. I know libgdx has vector2 and vector3 classes, but I've never used them. When I come across weird problems and search stackoverflow for help, I see a lot of people just reaming the questions that use a certain datatype when another one is technically "proper." Like using an ArrayList because it does not require defined bounds versus re-defining an int[] with new known boundaries. Or even something trivial like this: for(int i = 0; i < items.length; i ++) { // do something } I know it evaluates item.length on every iteration. I just don't care. I know items will never be more than 15 to 20 items. So why bother caring if I evaluate items.length on every iteration? So I wonder - why does everyone get all up in arms over this? Who cares if I use a less efficient datatype to get the job done? I ran some tests to see how the app performs using the lazy, get it done fast and don't look back method I just described versus the proper, follow the tutorial and use the exact data types suggested by the community. The results: Same thing. Average 45 fps. I opened every app on the phone and galaxy tab. Same deal. No difference. My game is pretty graphic intensive. It's not like it's just a simple thing. I expected it to perform kind of badly since I don't care to optimize image assets or... well, you probably get the idea. I'm making the game for fun. As a joke, really. But in doing so I'm working outside the normal scope of my job, which is to always follow the rules and do it the right way. So to say, I am without bounds here and this has caused me to wonder why I ever really care to be "proper" So I guess my question to you is this: Is there a threshold when it no longer matters to be proper? Is there a lasting, longer term consequence to the lazy, get it done and don't look back route? Is it ok to say - "so long as it gets the job done, I don't care?" Disclaimer: When I program my game, I am almost always drunk. I do it to remember why I got into this stuff to begin with because the monotony of client based web work will make you hate being a programmer. I'm having a blast and my game is not crashing, tests well, performs well, looks good on all devices so far and has no noticeable negative impact on any of my testing devices. I expected failure because I was being so drunkenly careless with my code, but to my surprise, it had no noticeable impact. I am now starting to question the need to be careful. Help me regain the ability to care! ... or explain why it's not a bad thing to not care. Secondary disclaimer: I am aware of the benefits of maintainability. For myself and others. Agreed. But it's not like someone happening across my inefficient int[] loop won't know what it does. As an experienced programmer those kinds of things are just clear on sight. I document the complex stuff for myself knowing I was drunk and will probably need a reminder. Those notes would clarify any confusion for someone who might ever gaze upon my ridiculous game - though the reality is that either I maintain it myself or it fades into time. I'm ok with that. But if it doesn't slow the device down, or crash, then crossing the t's and dotting the i's might actually require more time than it's worth.

  Read the article

• The cost of longer delay between development and QA

  - by Neil N

  At my current position, QA has become a bottleneck. We have had the unfortunate occurence of features being held out of the current build so that QA could finish testing. This means features that are done being developed may not get tested for 2-3 weeks after the developer has already moved on. With dev moving faster thean QA, this time gap is only going to get bigger. I keep flipping through my copy of Code Compelte, looking for a "Hard Data" snippet that shows the cost of fixing defects grows exponentially the longer it exists. Can someone point me to some studies that back up this concept? I am trying to convince the powers that be that the QA bottleneck is a lot more costly than they think.

  Read the article

• Keyboard Shortcuts no longer working on Ubuntu 12.04 with GNOME 3.4.1 [closed]

  - by Peter

  Possible Duplicate: What is the keyboard shortcut to minimise a window to launcher in unity? I upgraded from Ubuntu 11.10 (with Gnome 3.2 I think), to Ubuntu 12.04 with Gnome 3.4.1, and my custom shortcuts have stopped working. Opening up the All Settings - Keyboard - Shortcuts, I can see that my shortcuts are still there. All of the shortcuts that I didn't change are working, and my shortcuts in the custom section are working (eg Ctrl+Alt+G to open gedit), its just that the shortcuts I had customised before the upgrade no longer work. Under Launchers, I had changed "Launch Terminal" to Ctrl+Alt+T, and under Navigation I had changed move to workspace above/below to Shift+Ctrl+Up/Down. Investigating further, it looks like the default shortcuts for these actions work (Ctrl+Alt+Up/ Down moves me up and down workpaces), so I'm guessing that there is some discrepancy between what I am seeing on the Keyboard Settings and what my computer is reading from. Any help would be appreciated.

  Read the article

• Bluetooth no longer working?

  - by user68733

  I am using a Toshiba Portege A600 and have been using Ubuntu for about a year now. When I first installed Ubuntu "10.10", everything worked fine, including bluetooth. I was able to send and receive files. After upgrading to 11.04 and then to 11.10, bluetooth functionality decreased. I was able to view bluetooth devices, but not be able to pair or connect to them. Now, on 12.04, bluetooth is no longer recognised at all. When I open up the Bluetooth settings application, it says "No Bluetooth Adapters found". What is the cause of this, and how can I fix it. I have included the output of sudo lshw. http://pastebin.com/09w0vkfu Thanks!

  Read the article

• fresh install, update and x-windows no longer working after login 12.10

  - by Tigz

  I Just recently installed desktop 12.10 on laptop, all was working fine logged in and it stated it wanted to update as it found updates. naturally I let it update and it asked me to reboot to use the new updates did that, now it boots fine i get login prompt. login as per normal then all i get is background with nothing else, if i turn off the wireless i get the disconnection notification pop up but i have nothing else on screen any wrror messages gets displayed as well but their is nothing. their was one program that failed that no longer prompts which gives options of reloading or just closing and continuing either way it just look like it hangs I can ctrl alt del to log out and it does that fine but still wont load no mater how many times i try saw a topic about a ati driver playing up which he typed the following in a ty which i can get to all of them as well. export DISPLAY=:0;gnome-shell --replace the answer i got back was the program gnome-shell is not installed you can install it by typing sudo apt-get install gnome-shell i also tried sudo pkill X which did nothing any help would be appreciated Thanks

  Read the article

• Clean Ubuntu 14.04 install taking longer to boot after kernel upgrade

  - by mvburgos

  Hello this is my first post. I own an Asus Chromebox (2gb ram, 16 gb sdd, 3.0 usb ports) and fresh installed Ubuntu 14.04 x64. I decided to upgrade kernel because I was experiencing some freezing issues with XBMC, So first i installed stable kernel 3.14.04 from mainline and boot time was fine (it booted very fast I would say about 5 seconds) then after a while I installed kernels 3.15 and 3.14.06 BUT this time I also removed OLD STOCK KERNELS (dunno if that has something to do) after that the problem began, boot time is taking way longer, I would say about 30 seconds. Finally today I installed kernel 3.14.07, set grub to boot with that by default but same thing :( I post boot.log and dmesg, hope it is correct for this matter, if you need any other log just let me know. boot.log dmesg

  Read the article

• After upgrading to 12.04 from 10.10 my mythbuntu standard MCEUSB remote no longer works

  - by keepitsimpleengineer

  I had no problems using my Windows Media Center Remote with 10.10 Mythbuntu, but after upgrading, it no longer affects Mythbuntu. I have verified and re-installed it in Mythbuntu Control Centre. I have used irw to verify the ir buttons actions are properly received by the HTPC. How do I go about fixing this? 3.2.0-26-generic (#41-Ubuntu SMP Thu Jun 14 17:49:24 UTC 2012) Xorg version: 1.11.3 (16 July 2012 08:06:31PM) GCC: 4.6 (x86_64-linux-gnu) Current updates as of 2012?07?21 $cat /etc/lirc/hardware.con #Chosen Remote Control REMOTE="Windows Media Center Transceivers/Remotes (all)" REMOTE_MODULES="lirc_dev mceusb" REMOTE_DRIVER="" REMOTE_DEVICE="/dev/lirc0" REMOTE_SOCKET="" REMOTE_LIRCD_CONF="mceusb/lircd.conf.mceusb" REMOTE_LIRCD_ARGS="" #Chosen IR Transmitter TRANSMITTER="None" TRANSMITTER_MODULES="" TRANSMITTER_DRIVER="" TRANSMITTER_DEVICE="" TRANSMITTER_SOCKET="" TRANSMITTER_LIRCD_CONF="" TRANSMITTER_LIRCD_ARGS="" #Enable lircd START_LIRCD="true" #Don't start lircmd even if there seems to be a good config file #START_LIRCMD="false" #Try to load appropriate kernel modules LOAD_MODULES="true" # Default configuration files for your hardware if any LIRCMD_CONF="" #Forcing noninteractive reconfiguration #If lirc is to be reconfigured by an external application #that doesn't have a debconf frontend available, the noninteractive #frontend can be invoked and set to parse REMOTE and TRANSMITTER #It will then populate all other variables without any user input #If you would like to configure lirc via standard methods, be sure #to leave this set to "false" FORCE_NONINTERACTIVE_RECONFIGURATION="false" START_LIRCMD="" # lsusb | grep -i infrared Bus 003 Device 002: ID 0471:0815 Philips (or NXP) eHome Infrared Receiver

  Read the article

• updatedb & locate command problem - Files from external hard drive are no longer indexed after rebooting

  - by user784637

  Files from my external hard drive are no longer indexed after rebooting. I have to remount and then run # updatedb after each reboot. The problem is updatedb takes a few minutes for my external hard drives. Is there any way I can retain indexing for my externals after I reboot so that the locate command can search through my externals? EDIT: Per Request here are my specs: $ cat /etc/updatedb.conf PRUNE_BIND_MOUNTS="yes" # PRUNENAMES=".git .bzr .hg .svn" PRUNEPATHS="/tmp /var/spool /media" PRUNEFS="NFS nfs nfs4 rpc_pipefs afs binfmt_misc proc smbfs autofs iso9660 ncpfs coda devpts ftpfs devfs mfs shfs sysfs cifs lustre_lite tmpfs usbfs udf fuse.glusterfs fuse.sshfs ecryptfs fusesmb devtmpfs" # mount /dev/sda5 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) none on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) none on /dev type devtmpfs (rw,mode=0755) none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) none on /dev/shm type tmpfs (rw,nosuid,nodev) none on /var/run type tmpfs (rw,nosuid,mode=0755) none on /var/lock type tmpfs (rw,noexec,nosuid,nodev) none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev) gvfs-fuse-daemon on /home/me/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=me) /dev/sdb1 on /media/me type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096,default_permissions) /dev/sdd1 on /media/Little Boy type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096,default_permissions) /dev/sde1 on /media/Fat Man type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096,default_permissions) # on_ac_power; echo $? 255

  Read the article

• Should my dropdown of recently used items show items I no longer have access to

  - by Dan Hibbert

  We are implementing a client for our document management system. Part of this is the checkin screen where one of the fields a user chooses is the folder where the document should be checked into. In our original system, this was represented with a combobox where a user could hand type a folder path or select a path from a list of 5 folders they'd recently used for checking. It is possible that between the time they used the folder and the time they are doing the new checkin the user will no longer have access to the folder. At present, we still show the folder as an option and then, if the user chooses that folder, display an error message when the user submits the check in. We are thinking of removing these recently used folders the user doesn't have access to (we'll make a check when the form is instantiated) because why show an option if we know it will cause a failure (and another dialog message the user has to OK). However, an opposite opinion is that if we remove those folders, the users will think the system has "forgotten" their recent choices and will lose trust in what they are using. I'd like to get some opinions on the better user experience for this problem.

  Read the article

• lirc_zilog IR transmission no longer working with HD-PVR on 12.04

  - by johnf

  I have been running a ubuntu 10.04 with a patched version of lirc_zilog for two years. I upgraded to 12.04 and lirc_zilog is no longer working with my HD-PVR. The MythTV wiki reports that it did work out of the box with 11.04. The error message I get on irsend is as follows: johnf@carbon:~$ /usr/local/bin/irsend SEND_ONCE blaster 0_130_KEY_POWER irsend: command failed: SEND_ONCE blaster 0_130_KEY_POWER irsend: hardware does not support sending The lircd daemon, run interactively, reports the following: lircd: accepted new client on /var/run/lirc/lircd lircd: could not get hardware features lircd: this device driver does not support the LIRC ioctl interface lircd: major number of /dev/lirc0 is 250 lircd: LIRC major number is 61 lircd: check if /dev/lirc0 is a LIRC device lircd: WARNING: Failed to initialize hardware lircd: error processing command: SEND_ONCE blaster 0_130_KEY_POWER lircd: hardware does not support sending lircd: removed client Checking dmesg seems to indicate that the kernel module is loading properly: [56497.730743] lirc_zilog: module is from the staging directory, the quality is unknown, you have been warned. [56497.730999] lirc_zilog: Zilog/Hauppauge IR driver initializing [56497.732484] lirc_zilog: ir_probe: ir_rx_z8f0811_hdpvr on i2c-0 (Hauppage HD PVR I2C), client addr=0x71 [56497.732493] lirc_zilog: ir_probe: ir_tx_z8f0811_hdpvr on i2c-0 (Hauppage HD PVR I2C), client addr=0x70 [56497.732496] lirc_zilog: probing IR Tx on Hauppage HD PVR I2C (i2c-0) [56497.756822] lirc_zilog: firmware of size 302355 loaded [56497.756945] lirc_zilog: 743 IR blaster codesets loaded [56497.757030] i2c i2c-0: lirc_dev: driver lirc_zilog registered at minor = 0 [56497.757033] lirc_zilog: IR unit on Hauppage HD PVR I2C (i2c-0) registered as lirc0 and ready [56497.757035] lirc_zilog: probe of IR Tx on Hauppage HD PVR I2C (i2c-0) done [56497.757056] lirc_zilog: initialization complete Here is my /etc/lirc/hardware.conf #Chosen IR Transmitter TRANSMITTER="HD-PVR" TRANSMITTER_MODULES="lirc_dev lirc_zilog" TRANSMITTER_DRIVER="" TRANSMITTER_DEVICE="/dev/lirc0" TRANSMITTER_SOCKET="" TRANSMITTER_LIRCD_CONF="" TRANSMITTER_LIRCD_ARGS="" My lircd.conf is a copy of the recommended one. Examination of the kernel source seems to indicate that the lirc_zilog module should support transmission, it's newer than the patched version I was manually compiling on 10.04. I was previously using a manually built version of lirc 0.8.7 and not the packaged one. I'm now running the packaged version 9.0. I can provide any additional information required and will perform tests quickly. I'm very eager to get this issue resolved.

  Read the article

• Keyring no longer prompts for password when SSH-ing

  - by Lie Ryan

  I remember that I used to be able to do ssh [email protected] and have a prompt asks me for a password to unlock the keyring for the whole GNOME session so subsequent ssh wouldn't need to enter the keyring password any longer (not quite sure if this is in Ubuntu or other distro). But nowadays doing ssh [email protected] would ask me, in the terminal, my keyring password every single time; which defeats the purpose of using SSH keys. I checked $ cat /etc/pam.d/lightdm | grep keyring auth optional pam_gnome_keyring.so session optional pam_gnome_keyring.so auto_start which looks fine, and $ pgrep keyring 1784 gnome-keyring-d so the keyring daemon is alive. I finally found that SSH_AUTH_SOCK variable (and GNOME_KEYRING_CONTROL and GPG_AGENT_INFO and GNOME_KEYRING_PID) are not being set properly. What is the proper way to set this variable and why aren't they being set in my environment (i.e. shouldn't they be set in default install)? I guess I can set it in .bashrc, but then the variables would only be defined in bash session, while that is fine for ssh, I believe the other environment variables are necessary for GUI apps to use keyring.

  Read the article

• Bluetooth mouse no longer paired after resuming from suspend since upgrading to 13.10

  - by Korakys

  Since upgrading to 13.10 from 13.04 my mouse no longer connects via bluetooth. In settings it states that the mouse is not paired. Restarting bluetooth with sudo /etc/init.d/bluetooth restart does not help. Restarting the computer does fix the problem if bluetooth is restarted also with the previously mentioned command, but this is not ideal. The mouse worked fine prior to updating to 13.10. The computer is a ThinkPad X230 with a Broadcom 'BCM20702A0' bluetooth module (I think). When it is not working hciconfig hci0 -a returns: hci0: Type: BR/EDR Bus: USB BD Address: C0:18:85:DB:F3:D1 ACL MTU: 1021:8 SCO MTU: 64:1 UP RUNNING PSCAN RX bytes:766129 acl:49888 sco:0 events:2233 errors:0 TX bytes:5953 acl:240 sco:0 commands:274 errors:0 Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH SNIFF Link mode: SLAVE ACCEPT Name: 'BCM20702A' Class: 0x6e0100 Service Classes: Networking, Rendering, Capturing, Audio, Telephony Device Class: Computer, Uncategorized HCI Version: 4.0 (0x6) Revision: 0x1000 LMP Version: 4.0 (0x6) Subversion: 0x220e Manufacturer: Broadcom Corporation (15) When it is working hciconfig hci0 -a returns: hci0: Type: BR/EDR Bus: USB BD Address: C0:18:85:DB:F3:D1 ACL MTU: 1021:8 SCO MTU: 64:1 UP RUNNING PSCAN RX bytes:253334 acl:16391 sco:0 events:842 errors:0 TX bytes:2519 acl:65 sco:0 commands:84 errors:0 Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH SNIFF Link mode: SLAVE ACCEPT Name: 'ubuntu-0' Class: 0x6e0100 Service Classes: Networking, Rendering, Capturing, Audio, Telephony Device Class: Computer, Uncategorized HCI Version: 4.0 (0x6) Revision: 0x1000 LMP Version: 4.0 (0x6) Subversion: 0x220e Manufacturer: Broadcom Corporation (15) I am a relative novice with linux so don't ask me compile anything please, but I can use google.

  Read the article

• Norton Ghost EBAB03F1: The specified network name is no longer available

  - by Breck Carter

  After about 15 minutes, a Norton Ghost 14 backup fails with Error EBAB03F1: The specified network name is no longer available. The source computer is a P4 laptop running Windows XP SP3. The target computer is a Core2 Quad desktop running Windows Vista Ultimate 64bit. It does not help to disable Norton 360 on the source computer or Norton Antivirus 2008 on the target computer. The Event Viewer consistently shows the same two VSS-related errors after Norton Ghost starts but before it fails. It makes no difference if the VSS service is started or stopped. The VSS errors do not appear elsewhere in the event log, only after Ghost starts. The MSS event messages, however, are quite common, appearing throughout the log, and they may have nothing to do with the problem. Here is the Norton Ghost error display... -Errors exist. --Unable to write to file. ---Error EBAB03F1: The specified network name is no longer available. ---Unable to set file size. ----Error EBAB03F1: The specified network name is no longer available. ----Unable to write to file. -----Error EBAB03F1: The specified network name is no longer available. -----Unable to set file size. ------Error EBAB03F1: The specified network name is no longer available. Here are the source computer events, with the final error at the top and the "Ghost Starting" message at the bottom: ===== Event Type: Error Event Source: Norton Ghost Event Category: High Priority Event ID: 100 Date: 11/09/2009 Time: 9:40:26 AM User: N/A Computer: PAVILION2 Description: Error EC8F17B7: Cannot create recovery points for job: Drive Backup of (C:\) (3). Error E7D1001F: Unable to write to file. Error EBAB03F1: The specified network name is no longer available. Error E7D10046: Unable to set file size. Error EBAB03F1: The specified network name is no longer available. Error E7D1001F: Unable to write to file. Error EBAB03F1: The specified network name is no longer available. Error E7D10046: Unable to set file size. Error EBAB03F1: The specified network name is no longer available. Details: 0xEBAB0005 Source: Norton Ghost ===== Event Type: Information Event Source: MSSQL$SQLEXPRESS Event Category: Server Event ID: 3421 Date: 11/09/2009 Time: 9:34:06 AM User: NT AUTHORITY\NETWORK SERVICE Computer: PAVILION2 Description: Recovery completed for database ReportServer$SQLEXPRESSTempDB (database ID 6) in 1 second(s) (analysis 205 ms, redo 0 ms, undo 376 ms.) This is an informational message only. No user action is required. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 5d 0d 00 00 0a 00 00 00 ]....... 0008: 15 00 00 00 50 00 41 00 ....P.A. 0010: 56 00 49 00 4c 00 49 00 V.I.L.I. 0018: 4f 00 4e 00 32 00 5c 00 O.N.2.\. 0020: 53 00 51 00 4c 00 45 00 S.Q.L.E. 0028: 58 00 50 00 52 00 45 00 X.P.R.E. 0030: 53 00 53 00 00 00 18 00 S.S..... 0038: 00 00 52 00 65 00 70 00 ..R.e.p. 0040: 6f 00 72 00 74 00 53 00 o.r.t.S. 0048: 65 00 72 00 76 00 65 00 e.r.v.e. 0050: 72 00 24 00 53 00 51 00 r.$.S.Q. 0058: 4c 00 45 00 58 00 50 00 L.E.X.P. 0060: 52 00 45 00 53 00 53 00 R.E.S.S. 0068: 00 00 .. ===== Event Type: Information Event Source: MSSQL$SQLEXPRESS Event Category: Server Event ID: 17137 Date: 11/09/2009 Time: 9:34:02 AM User: NT AUTHORITY\NETWORK SERVICE Computer: PAVILION2 Description: Starting up database 'ReportServer$SQLEXPRESSTempDB'. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: f1 42 00 00 0a 00 00 00 ñB...... 0008: 15 00 00 00 50 00 41 00 ....P.A. 0010: 56 00 49 00 4c 00 49 00 V.I.L.I. 0018: 4f 00 4e 00 32 00 5c 00 O.N.2.\. 0020: 53 00 51 00 4c 00 45 00 S.Q.L.E. 0028: 58 00 50 00 52 00 45 00 X.P.R.E. 0030: 53 00 53 00 00 00 18 00 S.S..... 0038: 00 00 52 00 65 00 70 00 ..R.e.p. 0040: 6f 00 72 00 74 00 53 00 o.r.t.S. 0048: 65 00 72 00 76 00 65 00 e.r.v.e. 0050: 72 00 24 00 53 00 51 00 r.$.S.Q. 0058: 4c 00 45 00 58 00 50 00 L.E.X.P. 0060: 52 00 45 00 53 00 53 00 R.E.S.S. 0068: 00 00 .. ===== Event Type: Error Event Source: VSS Event Category: None Event ID: 5013 Date: 11/09/2009 Time: 9:28:32 AM User: N/A Computer: PAVILION2 Description: Volume Shadow Copy Service error: Shadow Copy writer ContentIndexingService called routine RegQueryValueExW which failed with status 0x80070002 (converted to 0x800423f4). For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 57 53 48 43 4f 4d 4e 43 WSHCOMNC 0008: 32 32 39 32 00 00 00 00 2292.... 0010: 57 53 48 43 49 43 00 00 WSHCIC.. 0018: 32 38 37 00 00 00 00 00 287..... ===== Event Type: Error Event Source: VSS Event Category: None Event ID: 5013 Date: 11/09/2009 Time: 9:28:32 AM User: N/A Computer: PAVILION2 Description: Volume Shadow Copy Service error: Shadow Copy writer ContentIndexingService called routine RegQueryValueExW which failed with status 0x80070002 (converted to 0x800423f4). For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 57 53 48 43 4f 4d 4e 43 WSHCOMNC 0008: 32 32 39 32 00 00 00 00 2292.... 0010: 57 53 48 43 49 43 00 00 WSHCIC.. 0018: 32 38 37 00 00 00 00 00 287..... ===== Event Type: Error Event Source: VSS Event Category: None Event ID: 12302 Date: 11/09/2009 Time: 9:28:32 AM User: N/A Computer: PAVILION2 Description: Volume Shadow Copy Service error: An internal inconsistency was detected in trying to contact shadow copy service writers. Please check to see that the Event Service and Volume Shadow Copy Service are operating properly. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 42 55 45 43 58 4d 4c 43 BUECXMLC 0008: 33 36 33 37 00 00 00 00 3637.... 0010: 42 55 45 43 58 4d 4c 43 BUECXMLC 0018: 33 36 30 37 00 00 00 00 3607.... ===== Event Type: Information Event Source: Norton Ghost Event Category: High Priority Event ID: 100 Date: 11/09/2009 Time: 9:27:57 AM User: N/A Computer: PAVILION2 Description: Info 6C8F1F63: The drive-based backup job, Drive Backup of (C:\) (3), has been started manually. Details: Source: Norton Ghost

  Read the article

• Wine is no longer able to initialize OpenGL

  - by nebukadnezzar

  Since a while, wine is no longer able to initialize OpenGL on my 64bit Linux. This is by no means a unique problem to me- Lots of people with nvidia cards running 64bit linux seem to have this problem with wine on oneiric: http://forum.winehq.org/viewtopic.php?p=66856&sid=9d6e5ad628ee6fb6e5ef04577275daed http://forum.pinguyos.com/Thread-Wine-OpenGl-Problem https://bbs.archlinux.org/viewtopic.php?id=137696 And while some launchpad bug reports say one should use this workaround: LD_PRELOAD=/usr/lib32/nvidia-current/libGL.so.1 wine <app> It unfortunately does not solve the problem at all for me; That is, if i'd run CS:S, the game will run just fine for a while, but will abort after some time, including a range of GLSL-related errors. Here the startup errors from simply running steam: + wine steam.exe fixme:process:GetLogicalProcessorInformation ((nil),0x33e488): stub [.. snip ...] fixme:dwmapi:DwmSetWindowAttribute (0x1009a, 3, 0x33d384, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x1009a, 4, 0x33d374, 4) stub err:wgl:is_extension_supported No OpenGL extensions found, check if your OpenGL setup is correct! err:wgl:is_extension_supported No OpenGL extensions found, check if your OpenGL setup is correct! err:wgl:is_extension_supported No OpenGL extensions found, check if your OpenGL setup is correct! [... this error is being reported a few dozen times, so snip again ...] err:wgl:is_extension_supported No OpenGL extensions found, check if your OpenGL setup is correct! err:wgl:is_extension_supported No OpenGL extensions found, check if your OpenGL setup is correct! err:wgl:is_extension_supported No OpenGL extensions found, check if your OpenGL setup is correct! err:wgl:is_extension_supported No OpenGL extensions found, check if your OpenGL setup is correct! fixme:iphlpapi:NotifyAddrChange (Handle 0x47cdba8, overlapped 0x45dba80): stub fixme:winsock:WSALookupServiceBeginW (0x47cdbc8 0x00000ff0 0x47cdbc4) Stub! [... snip ...] Here are the errors reported while running, and after running (because the log is huge-ish, it's pasted elsewhere): http://paste.ubuntu.com/901925/ Now, 32bit OpenGL works just fine; The 32bit executables of Nexuiz, for example, work just fine. That being said, I'm suspecting that this is a problem of wine itself. I've already manually built the git version of wine, to no avail. So what's going on? Is something broken? How do I check (correctly) whether something is broken? How do I solve this?

  Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >