Search Results

Search found 688 results on 28 pages for 'md nth'.

Page 1/28 | 1 2 3 4 5 6 7 8 9 10 11 12 | Next Page >

nth-child doesn't respond to class

- by Arne Stephensson

Is it possible to get the nth-child pseudo-selector to work with a specific class? See this example: http://jsfiddle.net/fZGvH/ I want to have the second DIV.red turn red, but it doesn't apply the color as expected. Not only that, but when you specify this, it changes the 5th DIV to red: div.red:nth-child(6) When you specify this, it changes the 8th DIV to red: div.red:nth-child(9) It seems to be one DIV behind. There are only 8 DIV tags in the example so I don't know why nth-child(9) even works. Testing using Firefox 3.6, but in my actual production code the same problem occurs in Chrome. I'm not understanding something about how this is supposed to work, would appreciate clarification. Also, this will change the 6th DIV to red, but what I actually want is for it to change the second DIV.red to red: div.red:nth-of-type(6) And I don't understand why nth-child() and nth-of-type() respond differently, since there are only eight tags of the same type in the document.

Read the article
MD RAID 1 with external bitmap doesn't fully resync

- by user64744

I have an interesting configuration: dual boot system with a RAID 1 that needs to be visible in both Windows and Linux. The Windows install is Win 7 Enterprise, and the Linux install is Kubuntu 10.04. To get the RAID to work, I set it up using Windows's "Dynamic Disks" RAID 1, and brought it up in Linux using MD with no persistent superblock, and a write-intent bitmap on another partition. (Without this bitmap, MD had no way of knowing that the array was in sync, and would do a complete resync every time the array started.) The array is assembled like so: mdadm --build /dev/md1 -l 1 -n 2 -b /var/local/md1.bitmap /dev/sdb2 /dev/sdc2 I expected that the first time I ran this command, it would resync the array, write out a bitmap with no dirty chunks, and all would be good. This wasn't the case: after completing the resync, the bitmap was mostly clean, but about 5% dirty blocks remained, as revealed by mdadm -X /var/local/md1.bitmap I didn't mount the filesystem on /dev/md1 or touch it in any other way. I then found that stopping and restarting the array: mdadm --stop /dev/md1 mdadm --build /dev/md1 -l 1 -n 2 -b /var/local/md1.bitmap /dev/sdb2 /dev/sdc2 did indeed read in the bitmap, with an ensuing resync that went quickly because most of the blocks were marked clean. The confusing part is that this resync further reduced the number of dirty blocks, but still did not remove all of them. By repeatedly stopping and restarting I could slowly bring the dirty block count down to around 0.6%, where it seemed to level out. Any ideas what could be causing this? It smells to me of a race condition somewhere that leads to blocks either being skipped over during synchronization or not properly cleared from the bitmap, but I really have no evidence to prove this. It doesn't look like hardware issues since both drives are new and have zero read errors and reallocated sectors reported by smartctl -a.

Read the article
Very poor read performance compared to write performance on md(raid1) / crypt(luks) / lvm

- by Android5360

I'm experiencing very poor read performance over raid1/crypt/lvm. In the same time, write speeds are about 2x+ faster on the same setup. On another raid1 setup on the same machine I get normal read speeds (maybe because I'm not using cryptsetup). OS related disks: sda + sdb. I have raid1 configuration with two disks, both are in place. I'm using LVM over the RAID. No encryption. Both disks are WD Green, 5400 rpm. IO test results on this raid1: dd if=/dev/zero of=/tmp/output.img3 bs=8k count=256k conv=fsync - 2147483648 bytes (2.1 GB) copied, 22.3392 s, 96.1 MB/s sync echo 3 > /proc/sys/vm/drop_caches dd if=/tmp/output.img3 of=/dev/null bs=8k - 2147483648 bytes (2.1 GB) copied, 15.9 s, 135 MB/s And here is the problematic setup (on the same machine). Currently I have only one sdc (WD Green, 5400rpm) configured in software raid1 + crypt (luks, serpent-xts-plain) + lvm. Tomorrow I will attach another disk (sdd) to complete this two-disk raid1 setup. IO tests results on this raid1: dd if=/dev/zero of=output.img3 bs=8k count=256k conv=fsync 2147483648 bytes (2.1 GB) copied, 17.7235 s, 121 MB/s sync echo 3 > /proc/sys/vm/drop_caches dd if=output.img3 of=/dev/null bs=8k 2147483648 bytes (2.1 GB) copied, 36.2454 s, 59.2 MB/s We can see that the read performance is very very bad (59MB/s compared to 135MB/s when using no encryption). Nothing is using the disks during benchmark. I can confirm this because I checked with iostat and dstat. Details on the hardware: disks: all are WD green, 5400rpm, 64mb cache. cpu: FX-8350 at stock speed ram: 4x4GB at 1066Mhz. Details on the software: OS: Debian Wheezy 7, amd64 mdadm: v3.2.5 - 18th May 2012 LVM version: 2.02.95(2) (2012-03-06) LVM Library version: 1.02.74 (2012-03-06) LVM Driver version: 4.22.0 cryptsetup: 1.4.3 Here is how I configured the slow raid1+crypt+lvm setup: parted /dev/sdc mklabel gpt type: ext4 start: 2048s end: -1 Now the raid, crypt and the lvm configuration: mdadm --create /dev/md1 --level=1 --raid-disks=2 missing /dev/sdc cryptsetup --cipher serpent-xts-plain luksFormat /dev/md1 cryptsetup luksOpen /dev/md1 md1_crypt vgcreate vg_sql /dev/mapper/md1_crypt lvcreate -l 100%VG vg_sql -n lv_sql mkfs.ext4 /dev/mapper/vg_sql-lv-sql mount /dev/mapper/vg_sql-lv_sql /sql So guys, can you help me identify the reason and fix it? It has to be something with the cryptsetup as there is no such read slowdown on the other setup (sda+sdb) where no encryption is present. But I have no idea what to do. Thanks!

Read the article
nth-of-type only working for 1 and 2

- by Owen O'Neill

I have a styling problem, I am using WordPress and want to do have the first two classes completely different to the others. My ideal situation is to have: .si-biplace:nth-of-type(3) { float:left; margin:20px 0px 0px 0px; } .si-image:nth-of-type(3) { float:left; margin:20px 0px 0px 0px; border:0px; } .si-title:nth-of-type(3) { width:100px; height:20px; margin:0px; font-size:7px; color:#FFFFFF; font-weight:bold; } They seem to work fine when it is: .si-biplace { float:left; margin:-10px 0px 0px 0px; } .si-biplace:nth-of-type(2) { float:left; margin:-10px 0px 0px 15px; } Is there a reason why it will not work with nth-of-type(3) but will with nth of type 2? I basically want different attributes for every next time the div is used but cannot have separate div classes as it runs through a php array.

Read the article
mdadm starts resync on every boot

- by Anteru

Since a few days (and I'm positive it started shortly before I updated my server from 13.04-13.10) my mdadm is resyncing on every boot. In the syslog, I get the following output [ 0.809256] md: linear personality registered for level -1 [ 0.811412] md: multipath personality registered for level -4 [ 0.813153] md: raid0 personality registered for level 0 [ 0.815201] md: raid1 personality registered for level 1 [ 1.101517] md: raid6 personality registered for level 6 [ 1.101520] md: raid5 personality registered for level 5 [ 1.101522] md: raid4 personality registered for level 4 [ 1.106825] md: raid10 personality registered for level 10 [ 1.935882] md: bind<sdc1> [ 1.943367] md: bind<sdb1> [ 1.945199] md/raid1:md0: not clean -- starting background reconstruction [ 1.945204] md/raid1:md0: active with 2 out of 2 mirrors [ 1.945225] md0: detected capacity change from 0 to 2000396680192 [ 1.945351] md: resync of RAID array md0 [ 1.945357] md: minimum _guaranteed_ speed: 1000 KB/sec/disk. [ 1.945359] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync. [ 1.945362] md: using 128k window, over a total of 1953512383k. [ 2.220468] md0: unknown partition table I'm not sure what's up with that detected capacity change, looking at some old logs, this does have appeared earlier as well without a resync right afterwards. In fact, I let it run yesterday until completion and rebooted, and then it wouldn't resync, but today it does resync again. For instance, yesterday I got: [ 1.872123] md: bind<sdc1> [ 1.950946] md: bind<sdb1> [ 1.952782] md/raid1:md0: active with 2 out of 2 mirrors [ 1.952807] md0: detected capacity change from 0 to 2000396680192 [ 1.954598] md0: unknown partition table So it seems to be a problem that the RAID array does not get marked as clean after every shutdown? How can I troubleshoot this? The disks themselves are both fine, SMART tells me no errors, everything ok.

Read the article
Debugging nth-child selector

- by Ross

I have the following selectors: .progress:nth-child(3n+1) { background: teal; } .progress:nth-child(3n+2) { background: red; } .progress:nth-child(3n+3) { background: blue; } However all of the items end up with a teal background. Are these selectors correct? I'm thinking I should get: Teal (every 3, starting with 1) Red (every 3, starting with 2) Blue (every 3, starting with 3) etc. I've tested on Firefox 3.5.8 and Opera 10.10 on Ubuntu. Also tested with nothing but these rules in the CSS. I'm using the YUI Reset stylesheet but excluding it does nothing.

Read the article
Where's my MD.070?

- by Dave Burke

In a previous Blog entry titled “Where’s My MD.050” I discussed how the OUM Analysis Specification is the “new-and-improved” version of the more traditional Functional Design Document (or MD.050 for Oracle AIM stalwarts). In a similar way, the OUM Design Specification is an evolution of what we used to call the Technical Design Document (or MD.070). Let’s dig a little deeper…… In a traditional software development process, the “Design Task” would include all the time and resources required to design the software component(s), AND to create the final Technical Design Document. However, in OUM, we have created distinct Tasks for pure design work, along with an optional Task for pulling all of that work together into a Design Specification. Some of the Design Tasks shown above will result in their own Work Products (i.e. an Architecture Description), whilst other Tasks would act as “placeholders” for a specific work effort. In any event, the DS.140 Design Specification can include a combination of unique content, along with links to other Work Products, together which enable a complete technical description of the component, or solution, being designed. So next time someone asks “where’s my MD.070” the short answer would be to tell them to read the OUM Task description for DS.140 – Design Specification!

Read the article
Where’s my MD.050?

- by Dave Burke

A question that I’m sometimes asked is “where’s my MD.050 in OUM?” For those not familiar with an MD.050, it serves the purpose of being a Functional Design Document (FDD) in one of Oracle’s legacy Methods. Functional Design Documents have existed for many years with their primary purpose being to describe the functional aspects of one or more components of an IT system, typically, a Custom Extension of some sort. So why don’t we have a direct replacement for the MD.050/FDD in OUM? In simple terms, the disadvantage of the MD.050/FDD approach is that it tends to lead practitioners into “Design mode” too early in the process. Whereas OUM encourages more emphasis on gathering, and describing the functional requirements of a system ahead of the formal Analysis and Design process. So that just means more work up front for the Business Analyst or Functional Consultants right? Well no…..the design of a solution, particularly when it involves a complex custom extension, does not necessarily take longer just because you put more thought into the functional requirements. In fact, one could argue the complete opposite, in that by putting more emphasis on clearly understanding the nuances of functionality requirements early in the process, then the overall time and cost incurred during the Analysis to Design process should be less. In short, as your understanding of requirements matures over time, it is far easier (and more cost effective) to update a document or a diagram, than to change lines of code. So how does that translate into Tasks and Work Products in OUM? Let us assume you have reached a point on a project where a Custom Extension is needed. One of the first things you should consider doing is creating a Use Case, and remember, a Use Case could be as simple as a few lines of text reflecting a “User Story”, or it could be what Cockburn1 describes a “fully dressed Use Case”. It is worth mentioned at this point the highly scalable nature of OUM in the sense that “documents” should not be produced just because that is the way we have always done things. Some projects may well be predicated upon a base of electronic documents, whilst other projects may take a much more Agile approach to describing functional requirements; through “User Stories” perhaps. In any event, it is quite common for a Custom Extension to involve the creation of several “components”, i.e. some new screens, an interface, a report etc. Therefore several Use Cases might be required, which in turn can then be assembled into a Use Case Package. Once you have the Use Cases attributed to an appropriate (fit-for-purpose) level of detail, and assembled into a Package, you can now create an Analysis Model for the Package. An Analysis Model is conceptual in nature, and depending on the solution being developing, would involve the creation of one or more diagrams (i.e. Sequence Diagrams, Collaboration Diagrams etc.) which collectively describe the Data, Behavior and Use Interface requirements of the solution. If required, the various elements of the Analysis Model may be indexed via an Analysis Specification. For Custom Extension projects that follow a pure Object Orientated approach, then the Analysis Model will naturally support the development of the Design Model without any further artifacts. However, for projects that are transitioning to this approach, then the various elements of the Analysis Model may be represented within the Analysis Specification. If we now return to the original question of “Where’s my MD.050”. The full answer would be: Capture the functional requirements within a Use Case Group related Use Cases into a Package Create an Analysis Model for each Package Consider creating an Analysis Specification (AN.100) as a index to each Analysis Model artifact An alternative answer for a relatively simple Custom Extension would be: Capture the functional requirements within a Use Case Optionally, group related Use Cases into a Package Create an Analysis Specification (AN.100) for each package 1 Cockburn, A, 2000, Writing Effective Use Case, Addison-Wesley Professional; Edition 1

Read the article
Finding nth-child of siblings via jQuery

- by DA

Let's say I have two tables that look like this: TH TH TH TH TD TD TD TD TD TD TD TD and TH TH TH TH TH TD TD TD TH TD TD TD I'd like to select the 3rd column in each. At first I was using nth-child as such: $('table tr td:nth-child(3)') But that's not going to work, as 3rd TD is in a different column in each table. What I need in pseudo code is 'get the 3rd TD or TH in each row'. I assume I need to use $.siblings but not entirely sure.

Read the article
JQuery nth-child not working properly

- by Keith Donegan

Hi Guys, I am using JQuery's nth-child selector to alter the margin on every 3rd div with a class of photo_post_thumbnail, but it alters it every 2nd div? Can anyone spot what I am doing wrong? Site http://www.clients.eirestudio.net/hatstand/wordpress/photos/ HTML markup <div class="postbox photo_post_thumbnail"> blah blah </div> <div class="postbox photo_post_thumbnail"> blah blah </div> <div class="postbox photo_post_thumbnail"> blah blah </div> JQuery Code $('.photo_post_thumbnail:nth-child(3n)').css('margin-right', '0px');

Read the article
How do i select the 1st and then every 4th row in a html-table with nth-child()-selector?

- by Nils

Ok, math isn't my strong side, I admit it. All I want to do is to select the first, 5th, 9th, 13th, 17th etc row in a html-table. Can anybody with better math-skills point me in the right directionor perhaps supply a "nth-child-for-dummies" guide? I tried nth-child(1n+4) (which selects the 4th row and everyone after), and i also tried nth-child(0n+4) which selects the fourth row and nothing after that. Thanks in advance.

Read the article
md/raid:md2: cannot start dirty degraded array, kernel panic

- by nl-x

After having made use of a remote power switch, my server did not come back online. When I went to the datacenter and reboot the computer on the spot I see the server booting (I see the centos progress bar with running almost all the way to the end) and eventually giving the following messages: md/raid:md2: cannot start dirty degraded array. md/raid:md2: failed to run raid set. md: pers->run() failed ... md/raid:md2: cannot start dirty degraded array. md/raid:md2: failed to run raid set. md: pers->run() failed ... Kernel panic - not syncing: Attempted to kill init! Pid: 1, comm: init not tainted 2.6.32-279.1.1.el6.i686 #1 Call Trace: [<c083bfbc>] ? panic+0x68/0x11c [<c045a501>] ? do_exit+0x741/0x750 [<c045a54c>] ? do_group_exit+0x3c/0xa0 [<c045a5c1>] ? sys_exit_group+0x11/0x20 [<c083eba4>] ? syscall_call+0x7/0xb [<c083007b>] ? cmos_wake_setup+0x62/0x112 The server runs CentOS and has software raid, and I don't have backups of the raid settings. The only backup I have is of /home and the database dumps. (Glad to at least have those though.) Since the server is an old Dell PowerEdge 1750 with no CD-ROM drive, I have no way of booting the machine from a boot disk. I also remember in the past that the server also wouldn't boot from a bootable USB disk. So the only way I know how to boot the server is to go to the datacenter, pick up the server and take it to the office. Screw open the server. Attach a cdrom drive to an IDE slot on the motherboard. And then boot it. I am hoping you guys could help me avoid this. I have looked a bit through the boot options and I found the following boot options. When CentOS is about to boot and interrupt the boot-countdown: CentOS (2.6.32-279.1.1.el63.i686) CentOS Linux (2.6.32-71.29.1.el6.i686) centos (2.6.32-71.el6.i686) I think the first configuration is the default one, because choosing that gets me to the above mentioned kernel panic. The other ones end with something like "Sleeping forever". I can press 'e' to edit boot commands, press 'a' to modify kernel arguments and press 'c' for grub command line. The command line gives a grub prompt. But I have no idea how to get the system to boot without (trying to) access the dirty partitions. What I want to do is off course: - boot the machine - check hard drive for errors - mark the drive as clean

Read the article
Reshape linux md raid5 that is already being reshaped?

- by smammy

I just converted my RAID1 array to a RAID5 array and added a third disk to it. I'd like to add a fourth disk without waiting fourteen hours for the first reshape to complete. I just did this: mdadm /dev/md0 --add /dev/sdf1 mdadm --grow /dev/md0 --raid-devices=3 --backup-file=/root/md0_n3.bak The entry in /proc/mdstat looks like this: md0 : active raid5 sdf1[2] sda1[0] sdb1[1] 976759936 blocks super 0.91 level 5, 64k chunk, algorithm 2 [3/3] [UUU] [>....................] reshape = 1.8% (18162944/976759936) finish=834.3min speed=19132K/sec Now I'd like to do this: mdadm /dev/md0 --add /dev/sdd1 mdadm --grow /dev/md0 --raid-devices=4 --backup-file=/root/md8_n4.bak Is this safe, or do I have to wait for the first reshape operation to complete? P.S.: I know I should have added both disks first, and then reshaped from 2 to 4 devices, but it's a little late for that.

Read the article
Use CSS3 nth-child to alternate the float of images within DIV tags...

- by Aaron Rodgers

Basically, what I'm trying to create is a page of div tags, each has an image inside them and I'm trying to use CSS3's nth-child to alternate the float of that specific image. But for the life of me, I can't get the nth-child to locate those images. Here is my code so far... CSS .featureBlock img:nth-of-type(even) { float: left; } .featureBlock img:nth-of-type(odd) { float: right; } This is the HTML of one of those div tags.... <div class="featureBlock"> <h1>Multisize Players</h1> <div class="featureHelpBlock"><a href="#">More help with this</a></div> <img src="http://office2.vzaar.com/images/features/ft_multisize_players.png"> <span class="featureContent"><p>A variety of player sizes is important as we recognise the fact that no two videos or websites are ever the same and you will want something that suits your site’s look. So if you record your video in 4x3 (not widescreen) or 16x9 (widescreen) we have the range of player sizes to suit your exact needs.</p> <p>We encode the video at the time of uploading in the size that you choose so that the picture and sound quality is retained throughout. Users can choose from the following sizes:</p></span> <br style="clear:both"> </div> Hope this makes sense...

Read the article
Any program or editor in windows 7 to run ".md" files

- by Anmol Saraf

I understand that '.md' is an extension for markdown format. While installing 'Grunt' from GitHub I see a lot of .md extension files inside node_module/grunt/docs folder. As per my understanding these files are supported by GitHub for documentation kind of things if I am not wrong. My question here is - Are there any editors/tools or programs available for Windows 7 where I can see these .md files executing ? When I try to open any of these file inside my text editor it displays in raw format with all '#" etc. keywords. I want to see the formatted version of these files so that without an internet connection also I can navigate the documentation on my machine. Thanks for helping !!

Read the article
Cluster Node Recovery Using Second Node in Solaris Cluster

- by Onur Bingul

Assumptions:Node 0a is the cluster node that has crashed and could not boot anymore.Node 0b is the node in cluster and in production with services active.Both nodes have their boot disk mirrored via SDS/SVM.We have many options to clone the boot disk from node 0b:- make a copy via network using the ufsdump command and pipe to ufsrestore - make a copy inserting the disk locally on node 0b and creating the third mirror with SDS- make a copy inserting the disk locally on node 0b using dd commandIn this procedure we are going to use dd command (from my experience this is the best option).Bare in mind that in the examples provided we work on Sun Fire V240 systems which have SCSI internal disks. In the case of Fibre Channel (FC) internal disks you must pay attention to the unique identifier, or World Wide Name (WWN), associated with each FC disk (in this case take a look at infodoc #40133 in order to recreate the device tree correctly).Procedure:On node 0b the boot disk is c1t0d0 (c1t1d0 mirror) and this is the VTOC:* Partition Tag Flags Sector Count Sector Mount Directory 0 2 00 0 2106432 2106431 1 3 01 2106432 74630784 76737215 2 5 00 0 143349312 143349311 4 7 00 76737216 50340672 127077887 5 4 00 127077888 14683968 141761855 6 0 00 141761856 1058304 142820159 7 0 00 142820160 529152 143349311We will insert the new disk on node 0b and it will be seen as c1t2d0.1) On node 0b we make a copy via dd from disk c1t0d0s2 to disk c1t2d0s2# dd if=/dev/rdsk/c1t0d0s2 of=/dev/rdsk/c1t2d0s2 bs=8192kA copy of a 72GB disk will take approximately about 45 minutes.Note: as an alternative to make identical copy of root over network follow Document ID: 47498Title: Sun[TM] Cluster 3.0: How to Rebuild a node with Veritas Volume Manager2) Perform an fsck on disk c1t2d0 data slices: 1. fsck -o f /dev/rdsk/c1t2d0s0 (root) 2. fsck -o f /dev/rdsk/c1t2d0s4 (/var) 3. fsck -o f /dev/rdsk/c1t2d0s5 (/usr) 4. fsck -o f /dev/rdsk/c1t2d0s6 (/globaldevices)3) Mount the root file system in order to edit following files for changing the node name:# mount /dev/dsk/c1t2d0s0 /mntChange the hostname from 0b to 0a:# cd /mnt/etc# vi hosts # vi hostname.bge0 # vi hostname.bge2 # vi nodename 4) Change the /mnt/etc/vfstab from the actual:/dev/md/dsk/d201 - - swap - no -/dev/md/dsk/d200 /dev/md/rdsk/d200 / ufs 1 no -/dev/md/dsk/d205 /dev/md/rdsk/d205 /usr ufs 1 no logging/dev/md/dsk/d204 /dev/md/rdsk/d204 /var ufs 1 no logging#/dev/md/dsk/d206 /dev/md/rdsk/d206 /globaldevices ufs 2 yes loggingswap - /tmp tmpfs - yes -/dev/md/dsk/d206 /dev/md/rdsk/d206 /global/.devices/node@2 ufs 2 noglobalto this (unencapsulate disk from SDS/SVM):/dev/dsk/c1t0d0s1 - - swap - no -/dev/dsk/c1t0d0s0 /dev/rdsk/c1t0d0s0 / ufs 1 no -/dev/dsk/c1t0d0s5 /dev/rdsk/c1t0d0s5 /usr ufs 1 no logging/dev/dsk/c1t0d0s4 /dev/rdsk/c1t0d0s4 /var ufs 1 no logging#/dev/md/dsk/d206 /dev/md/rdsk/d206 /globaldevices ufs 2 yes loggingswap - /tmp tmpfs - yes -/dev/dsk/c1t0d0s6 /dev/rdsk/c1t0d0s6 /global/.devices/node@1 ufs 2 no globalIt is important that global device partition (slice 6) in the new vfstab will point to the physical partition of the disk (in our case slice 6).Be careful with the name you use for the new disk. In this case we define it as c1t0d0 because we will insert it as target 0 in node 0a.But this could be different based on the configuration you are working on.5) Remove following entry from /mnt/etc/system (part of unencapsulation procedure):rootdev:/pseudo/md@0:0,200,blk6) Correct the link shared -> ../../global/.devices/node@2/dev/md/shared in order to point to the nodeid of node 0a (in our case nodeid 1):# cd /mnt/dev/mdhow it is now.... node 0b has nodeid 2lrwxrwxrwx 1 root root 42 Mar 10 2005 shared ->../../global/.devices/node@2/dev/md/shared# rm shared# ln -s ../../global/.devices/node@1/dev/md/shared sharedhow is going to be... with nodeid 1 for node 0alrwxrwxrwx 1 root root 42 Mar 10 2005 shared ->../../global/.devices/node@1/dev/md/shared7) Change nodeid (in our case from 2 to 1):# cd /mnt/etc/cluster# vi nodeid8) Change the file /mnt/etc/path_to_inst in order to reflect the correct nodeid for node 0a:# cd /mnt/etc# vi path_to_instChange entries from node@2 to node@1 with the vi command ":%s/node@2/node@1/g"9) Write the bootblock to the disk... just in case:# /usr/sbin/installboot /usr/platform/sun4u/lib/fs/ufs/bootblk /dev/rdsk/c1t2d0s0Now the disk is ready to be inserted in node 0a in order to bootup the node.10) Bootup node 0a with command "boot -sx"... this is becasue we need to make some changes in ccr files in order to recreate did environment.11) Modify cluster ccr:# cd /etc/cluster/ccr# rm did_instances# rm did_instances.bak# vi directory - remove the did_instances line.# /usr/cluster/lib/sc/ccradm -i /etc/cluster/ccr/directory # grep ccr_gennum /etc/cluster/ccr/directory ccr_gennum -1 # /usr/cluster/lib/sc/ccradm -i /etc/cluster/ccr/infrastructure # grep ccr_gennum /etc/cluster/ccr/infrastructure ccr_gennum -112) Bring the node 0a down again to the ok prompt and then issue the command "boot -r"Now the node will join the cluster and from scstat and metaset command you can verify functionality. Next step is to encapsulate the boot disk in SDS/SVM and create the mirrors.In our case node 0b has metadevice name starting from d200. For this reason on node 0a we need to create metadevice starting from d100. This is just an example, you can have different names.The important thing to remember is that metadevice boot disks have different names on each node.13) Remove metadevice pointing to the boot and mirror disks (inherit from node 0b):# metaclear -r -f d200# metaclear -r -f d201# metaclear -r -f d204# metaclear -r -f d205# metaclear -r -f d206verify from metastat that no metadevices are set for boot and mirror disks.14) Encapsulate the boot disk:# metainit -f d110 1 1 c1t0d0s0# metainit d100 -m d110# metaroot d10015) Reboot node 0a.16) Create all the metadevice for slices remaining on boot disk# metainit -f d111 1 1 c1t0d0s1# metainit d101 -m d111# metainit -f d114 1 1 c1t0d0s4# metainit d104 -m d114# metainit -f d115 1 1 c1t0d0s5# metainit d105 -m d115# metainit -f d116 1 1 c1t0d0s6# metainit d106 -m d11617) Edit the vfstab in order to specifiy metadevices created:old:/dev/dsk/c1t0d0s1 - - swap - no -/dev/md/dsk/d100 /dev/md/rdsk/d100 / ufs 1 no -/dev/dsk/c1t0d0s5 /dev/rdsk/c1t0d0s5 /usr ufs 1 no logging/dev/dsk/c1t0d0s4 /dev/rdsk/c1t0d0s4 /var ufs 1 no logging#/dev/md/dsk/d206 /dev/md/rdsk/d206 /globaldevices ufs 2 yes loggingswap - /tmp tmpfs - yes -/dev/dsk/c1t0d0s6 /dev/rdsk/c1t0d0s6 /global/.devices/node@1 ufs 2 no globalnew:/dev/md/dsk/d101 - - swap - no -/dev/md/dsk/d100 /dev/md/rdsk/d100 / ufs 1 no -/dev/md/dsk/d105 /dev/md/rdsk/d105 /usr ufs 1 no logging/dev/md/dsk/d104 /dev/md/rdsk/d104 /var ufs 1 no logging#/dev/md/dsk/106 /dev/md/rdsk/d106 /globaldevices ufs 2 yes loggingswap - /tmp tmpfs - yes -/dev/md/dsk/d106 /dev/md/rdsk/d106 /global/.devices/node@1 ufs 2 noglobal18) Reboot node 0a in order to check new SDS/SVM boot configuration.19) Label the mirror disk c1t1d0 with the VTOC of boot disk c1t0d0:# prtvtoc /dev/dsk/c1t0d0s2 > /var/tmp/VTOC_c1t0d0 # fmthard -s /var/tmp/VTOC_c1t0d0 /dev/rdsk/c1t1d0s220) Put DB replica on slice 7 of disk c1t1d0:# metadb -a -c 3 /dev/dsk/c1t1d0s721) Create metadevice for mirror disk c1t1d0 and attach the new mirror side:# metainit d120 1 1 c1t1d0s0# metattach d100 d120# metainit d121 1 1 c1t1d0s1# metattach d101 d121# metainit d124 1 1 c1t1d0s4# metattach d104 d124# metainit d125 1 1 c1t1d0s5# metattach d105 d125# metainit d126 1 1 c1t1d0s6# metattach d106 d126

Read the article
raid md device is not remove from memory, how to overcome this problem

- by santhosha

i create raid 10 , i removed two arrays form md11 one by one , after that i going to editing the contents those are mounted ( it will be not responding stage), after i try for remove arrays those are left it is shows device or resource busy ( is not removed from memory). i try to terminate process this is also not work, i absorve from 4 days resync will be 8.0% it can not modifying. cat /proc/mdstat Personalities : [raid1] [raid0] [raid6] [raid5] [raid4] [linear] [raid10] md11 : active raid10 sde1[3] sdj14 286743936 blocks 64K chunks 2 near-copies [4/1] [___U] [1:2:3:0] [=...................] resync = 8.0% (23210368/286743936) finish=289392.6min speed=15K/sec mdadm -D /dev/md11 /dev/md11: Version : 00.90.03 Creation Time : Sun Jan 16 16:20:01 2011 Raid Level : raid10 Array Size : 286743936 (273.46 GiB 293.63 GB) Device Size : 143371968 (136.73 GiB 146.81 GB) Raid Devices : 4 Total Devices : 2 Preferred Minor : 11 Persistence : Superblock is persistent Update Time : Sun Jan 16 16:56:07 2011 State : active, degraded, resyncing Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Layout : near=2, far=1 Chunk Size : 64K Rebuild Status : 8% complete UUID : 5e124ea4:79a01181:dc4110d3:a48576ea Events : 0.23 Number Major Minor RaidDevice State 0 0 0 0 removed 1 0 0 1 removed 4 8 145 2 faulty spare rebuilding /dev/sdj1 3 8 65 3 active sync /dev/sde1 umount /dev/md11 umount: /dev/md11: not mounted mdadm -S /dev/md11 mdadm: fail to stop array /dev/md11: Device or resource busy lsof /dev/md11 COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME mount 2128 root 3r BLK 9,11 4058 /dev/md11 mount 5018 root 3r BLK 9,11 4058 /dev/md11 mdadm 27605 root 3r BLK 9,11 4058 /dev/md11 mount 30562 root 3r BLK 9,11 4058 /dev/md11 badblocks 30591 root 3r BLK 9,11 4058 /dev/md11 kill -9 2128 kill -9 5018 kill -9 27605 kill -9 30562 kill -3 30591 mdadm -S /dev/md11 mdadm: fail to stop array /dev/md11: Device or resource busy lsof /dev/md11 COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME mount 2128 root 3r BLK 9,11 4058 /dev/md11 mount 5018 root 3r BLK 9,11 4058 /dev/md11 mdadm 27605 root 3r BLK 9,11 4058 /dev/md11 mount 30562 root 3r BLK 9,11 4058 /dev/md11 badblocks 30591 root 3r BLK 9,11 4058 /dev/md11 cat /proc/mdstat Personalities : [raid1] [raid0] [raid6] [raid5] [raid4] [linear] [raid10] md11 : active raid10 sde1[3] sdj14 286743936 blocks 64K chunks 2 near-copies [4/1] [___U] [1:2:3:0] [=...................] resync = 8.0% (23210368/286743936) finish=289392.6min speed=15K/sec

Read the article
formatting before md device creation in RAID5

- by kumar

consider you are creating a raid5 device with three drives. mdadm --create /dev/md0 --leve=5 --raid-disk=3 /dev/sda1 /dev/sdb1 /dev/sdc1 After issuing this command , I can see the progress of md device creating using cat /proc/mdstat. During the progress ITSELF, can I create a file ssytem partition say ext2 on md0 device like: mkfs.ext2 /dev/md0. Actually I am able to create this and want to confirm whether doing this before 100% completion of md device creation is CORRECT?

Read the article
fd partitions gone from 2 discs, md happy with it and resyncs. How to recover ?

- by d0nd

Hey gurus, need some help badly with this one. I run a server with a 6Tb md raid5 volume built over 7*1Tb disks. I've had to shut down the server lately and when it went back up, 2 out of the 7 disks used for the raid volume had lost its conf : dmesg : [ 10.184167] sda: sda1 sda2 sda3 // System disk [ 10.202072] sdb: sdb1 [ 10.210073] sdc: sdc1 [ 10.222073] sdd: sdd1 [ 10.229330] sde: sde1 [ 10.239449] sdf: sdf1 [ 11.099896] sdg: unknown partition table [ 11.255641] sdh: unknown partition table All 7 disks have same geometry and were configured alike : dmesg : Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x1e7481a5 Device Boot Start End Blocks Id System /dev/sdb1 1 121601 976760001 fd Linux raid autodetect All 7 disks (sdb1, sdc1, sdd1, sde1, sdf1, sdg1, sdh1) were used in a md raid5 xfs volume. When booting, md, which was (obviously) out of sync kicked in and automatically started rebuilding over the 7 disks, including the two "faulty" ones; xfs tried to do some shenanigans as well: dmesg : [ 19.566941] md: md0 stopped. [ 19.817038] md: bind<sdc1> [ 19.817339] md: bind<sdd1> [ 19.817465] md: bind<sde1> [ 19.817739] md: bind<sdf1> [ 19.817917] md: bind<sdh> [ 19.818079] md: bind<sdg> [ 19.818198] md: bind<sdb1> [ 19.818248] md: md0: raid array is not clean -- starting background reconstruction [ 19.825259] raid5: device sdb1 operational as raid disk 0 [ 19.825261] raid5: device sdg operational as raid disk 6 [ 19.825262] raid5: device sdh operational as raid disk 5 [ 19.825264] raid5: device sdf1 operational as raid disk 4 [ 19.825265] raid5: device sde1 operational as raid disk 3 [ 19.825267] raid5: device sdd1 operational as raid disk 2 [ 19.825268] raid5: device sdc1 operational as raid disk 1 [ 19.825665] raid5: allocated 7334kB for md0 [ 19.825667] raid5: raid level 5 set md0 active with 7 out of 7 devices, algorithm 2 [ 19.825669] RAID5 conf printout: [ 19.825670] --- rd:7 wd:7 [ 19.825671] disk 0, o:1, dev:sdb1 [ 19.825672] disk 1, o:1, dev:sdc1 [ 19.825673] disk 2, o:1, dev:sdd1 [ 19.825675] disk 3, o:1, dev:sde1 [ 19.825676] disk 4, o:1, dev:sdf1 [ 19.825677] disk 5, o:1, dev:sdh [ 19.825679] disk 6, o:1, dev:sdg [ 19.899787] PM: Starting manual resume from disk [ 28.663228] Filesystem "md0": Disabling barriers, not supported by the underlying device [ 28.663228] XFS mounting filesystem md0 [ 28.884433] md: resync of RAID array md0 [ 28.884433] md: minimum _guaranteed_ speed: 1000 KB/sec/disk. [ 28.884433] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync. [ 28.884433] md: using 128k window, over a total of 976759936 blocks. [ 29.025980] Starting XFS recovery on filesystem: md0 (logdev: internal) [ 32.680486] XFS: xlog_recover_process_data: bad clientid [ 32.680495] XFS: log mount/recovery failed: error 5 [ 32.682773] XFS: log mount failed I ran fdisk and flagged sdg1 and sdh1 as fd. I tried to reassemble the array but it didnt work: no matter what was in mdadm.conf, it still uses sdg and sdh instead of sdg1 and sdh1. I checked in /dev and I see no sdg1 and and sdh1, shich explains why it wont use it. I just don't know why those partitions are gone from /dev and how to readd those... blkid : /dev/sda1: LABEL="boot" UUID="519790ae-32fe-4c15-a7f6-f1bea8139409" TYPE="ext2" /dev/sda2: TYPE="swap" /dev/sda3: LABEL="root" UUID="91390d23-ed31-4af0-917e-e599457f6155" TYPE="ext3" /dev/sdb1: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sdc1: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sdd1: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sde1: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sdf1: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sdg: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sdh: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" fdisk -l : Disk /dev/sda: 40.0 GB, 40020664320 bytes 255 heads, 63 sectors/track, 4865 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x8c878c87 Device Boot Start End Blocks Id System /dev/sda1 * 1 12 96358+ 83 Linux /dev/sda2 13 134 979965 82 Linux swap / Solaris /dev/sda3 135 4865 38001757+ 83 Linux Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x1e7481a5 Device Boot Start End Blocks Id System /dev/sdb1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xc9bdc1e9 Device Boot Start End Blocks Id System /dev/sdc1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdd: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xcc356c30 Device Boot Start End Blocks Id System /dev/sdd1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sde: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xe87f7a3d Device Boot Start End Blocks Id System /dev/sde1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdf: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xb17a2d22 Device Boot Start End Blocks Id System /dev/sdf1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdg: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x8f3bce61 Device Boot Start End Blocks Id System /dev/sdg1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdh: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xa98062ce Device Boot Start End Blocks Id System /dev/sdh1 1 121601 976760001 fd Linux raid autodetect I really dont know what happened nor how to recover from this mess. Needless to say the 5TB or so worth of data sitting on those disks are very valuable to me... Any idea any one? Did anybody ever experienced a similar situation or know how to recover from it ? Can someone help me? I'm really desperate... :x

Read the article
using jquery as an alternative to css nth child

- by JCHASE11

Hi. I am using the following css to create list items with a chckerboard background ( every other list item has a grey background, which shift every row to create a checkerboard pattern: li:nth-child(8n+2), li:nth-child(8n+4), li:nth-child(8n+5), li:nth-child(8n+7) { background-color:grey; } Is there way I can do this using jquery that is more supportive than css3? Thanks

Read the article
Degraded RAID5 and no md superblock on one of remaining drive

- by ark1214

This is actually on a QNAP TS-509 NAS. The RAID is basically a Linux RAID. The NAS was configured with RAID 5 with 5 drives (/md0 with /dev/sd[abcde]3). At some point, /dev/sde failed and drive was replaced. While rebuilding (and not completed), the NAS rebooted itself and /dev/sdc dropped out of the array. Now the array can't start because essentially 2 drives have dropped out. I disconnected /dev/sde and hoped that /md0 can resume in degraded mode, but no luck.. Further investigation shows that /dev/sdc3 has no md superblock. The data should be good since the array was unable to assemble after /dev/sdc dropped off. All the searches I done showed how to reassemble the array assuming 1 bad drive. But I think I just need to restore the superblock on /dev/sdc3 and that should bring the array up to a degraded mode which will allow me to backup data and then proceed with rebuilding with adding /dev/sde. Any help would be greatly appreciated. mdstat does not show /dev/md0 # cat /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] [multipath] md5 : active raid1 sdd2[2](S) sdc2[3](S) sdb2[1] sda2[0] 530048 blocks [2/2] [UU] md13 : active raid1 sdd4[3] sdc4[2] sdb4[1] sda4[0] 458880 blocks [5/4] [UUUU_] bitmap: 40/57 pages [160KB], 4KB chunk md9 : active raid1 sdd1[3] sdc1[2] sdb1[1] sda1[0] 530048 blocks [5/4] [UUUU_] bitmap: 33/65 pages [132KB], 4KB chunk mdadm show /dev/md0 is still there # mdadm --examine --scan ARRAY /dev/md9 level=raid1 num-devices=5 UUID=271bf0f7:faf1f2c2:967631a4:3c0fa888 ARRAY /dev/md5 level=raid1 num-devices=2 UUID=0d75de26:0759d153:5524b8ea:86a3ee0d spares=2 ARRAY /dev/md0 level=raid5 num-devices=5 UUID=ce3e369b:4ff9ddd2:3639798a:e3889841 ARRAY /dev/md13 level=raid1 num-devices=5 UUID=7384c159:ea48a152:a1cdc8f2:c8d79a9c With /dev/sde removed, here is the mdadm examine output showing sdc3 has no md superblock # mdadm --examine /dev/sda3 /dev/sda3: Magic : a92b4efc Version : 00.90.00 UUID : ce3e369b:4ff9ddd2:3639798a:e3889841 Creation Time : Sat Dec 8 15:01:19 2012 Raid Level : raid5 Used Dev Size : 1463569600 (1395.77 GiB 1498.70 GB) Array Size : 5854278400 (5583.08 GiB 5994.78 GB) Raid Devices : 5 Total Devices : 4 Preferred Minor : 0 Update Time : Sat Dec 8 15:06:17 2012 State : active Active Devices : 4 Working Devices : 4 Failed Devices : 1 Spare Devices : 0 Checksum : d9e9ff0e - correct Events : 0.394 Layout : left-symmetric Chunk Size : 64K Number Major Minor RaidDevice State this 0 8 3 0 active sync /dev/sda3 0 0 8 3 0 active sync /dev/sda3 1 1 8 19 1 active sync /dev/sdb3 2 2 8 35 2 active sync /dev/sdc3 3 3 8 51 3 active sync /dev/sdd3 4 4 0 0 4 faulty removed [~] # mdadm --examine /dev/sdb3 /dev/sdb3: Magic : a92b4efc Version : 00.90.00 UUID : ce3e369b:4ff9ddd2:3639798a:e3889841 Creation Time : Sat Dec 8 15:01:19 2012 Raid Level : raid5 Used Dev Size : 1463569600 (1395.77 GiB 1498.70 GB) Array Size : 5854278400 (5583.08 GiB 5994.78 GB) Raid Devices : 5 Total Devices : 4 Preferred Minor : 0 Update Time : Sat Dec 8 15:06:17 2012 State : active Active Devices : 4 Working Devices : 4 Failed Devices : 1 Spare Devices : 0 Checksum : d9e9ff20 - correct Events : 0.394 Layout : left-symmetric Chunk Size : 64K Number Major Minor RaidDevice State this 1 8 19 1 active sync /dev/sdb3 0 0 8 3 0 active sync /dev/sda3 1 1 8 19 1 active sync /dev/sdb3 2 2 8 35 2 active sync /dev/sdc3 3 3 8 51 3 active sync /dev/sdd3 4 4 0 0 4 faulty removed [~] # mdadm --examine /dev/sdc3 mdadm: No md superblock detected on /dev/sdc3. [~] # mdadm --examine /dev/sdd3 /dev/sdd3: Magic : a92b4efc Version : 00.90.00 UUID : ce3e369b:4ff9ddd2:3639798a:e3889841 Creation Time : Sat Dec 8 15:01:19 2012 Raid Level : raid5 Used Dev Size : 1463569600 (1395.77 GiB 1498.70 GB) Array Size : 5854278400 (5583.08 GiB 5994.78 GB) Raid Devices : 5 Total Devices : 4 Preferred Minor : 0 Update Time : Sat Dec 8 15:06:17 2012 State : active Active Devices : 4 Working Devices : 4 Failed Devices : 1 Spare Devices : 0 Checksum : d9e9ff44 - correct Events : 0.394 Layout : left-symmetric Chunk Size : 64K Number Major Minor RaidDevice State this 3 8 51 3 active sync /dev/sdd3 0 0 8 3 0 active sync /dev/sda3 1 1 8 19 1 active sync /dev/sdb3 2 2 8 35 2 active sync /dev/sdc3 3 3 8 51 3 active sync /dev/sdd3 4 4 0 0 4 faulty removed fdisk output shows /dev/sdc3 partition is still there. [~] # fdisk -l Disk /dev/sdx: 128 MB, 128057344 bytes 8 heads, 32 sectors/track, 977 cylinders Units = cylinders of 256 * 512 = 131072 bytes Device Boot Start End Blocks Id System /dev/sdx1 1 8 1008 83 Linux /dev/sdx2 9 440 55296 83 Linux /dev/sdx3 441 872 55296 83 Linux /dev/sdx4 873 977 13440 5 Extended /dev/sdx5 873 913 5232 83 Linux /dev/sdx6 914 977 8176 83 Linux Disk /dev/sda: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 66 530113+ 83 Linux /dev/sda2 67 132 530145 82 Linux swap / Solaris /dev/sda3 133 182338 1463569695 83 Linux /dev/sda4 182339 182400 498015 83 Linux Disk /dev/sda4: 469 MB, 469893120 bytes 2 heads, 4 sectors/track, 114720 cylinders Units = cylinders of 8 * 512 = 4096 bytes Disk /dev/sda4 doesn't contain a valid partition table Disk /dev/sdb: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdb1 * 1 66 530113+ 83 Linux /dev/sdb2 67 132 530145 82 Linux swap / Solaris /dev/sdb3 133 182338 1463569695 83 Linux /dev/sdb4 182339 182400 498015 83 Linux Disk /dev/sdc: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdc1 1 66 530125 83 Linux /dev/sdc2 67 132 530142 83 Linux /dev/sdc3 133 182338 1463569693 83 Linux /dev/sdc4 182339 182400 498012 83 Linux Disk /dev/sdd: 2000.3 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdd1 1 66 530125 83 Linux /dev/sdd2 67 132 530142 83 Linux /dev/sdd3 133 243138 1951945693 83 Linux /dev/sdd4 243139 243200 498012 83 Linux Disk /dev/md9: 542 MB, 542769152 bytes 2 heads, 4 sectors/track, 132512 cylinders Units = cylinders of 8 * 512 = 4096 bytes Disk /dev/md9 doesn't contain a valid partition table Disk /dev/md5: 542 MB, 542769152 bytes 2 heads, 4 sectors/track, 132512 cylinders Units = cylinders of 8 * 512 = 4096 bytes Disk /dev/md5 doesn't contain a valid partition table

Read the article
CUDA threads output different value

- by kar

HAi, I wrote a cuda program , i have given the kernel function below. The device memory is allocated through CUDAMalloc(); the value of *md is 10; __global__ void add(int *md) { int x,oper=2; x=threadIdx.x; * md = *md*oper; if(x==1) { *md = *md*0; } if(x==2) { *md = *md*10; } if(x==3) { *md = *md+1; } if(x==4) { *md = *md-1; } } executed the above code add<<<1,5>>(*md) , add<<<1,4>>>(*md) for <<<1,5>>> the output is 19 for <<<1,4>>> the output is 21 1) I have doubt that cudaMalloc() will allocate in device main memory? 2) Why the last thread alone is executed always in the above program? Thank you

Read the article
Path of md device wrong after reboot

- by flammi88

I have to set up a software raid (level1) on a Ubuntu server 12.04. It should serve files in the network via Samba. The server has the following disks: 250gb Sata hdd (Ubuntu is installed on that drive) 2 TB Sata hdd (first disk in raid array, data disk) 2 TB Sata hdd (second data disk) I created one partition on every data disk with the type Linux raid autodetect. In the second step I created the raid1 with the following command: mdadm --create /dev/md0 --level=1 --raid-devices=2 /dev/sdb1 /dev/sdc1 After that, I added the array to the mdconf: mdadm --examine --scan >> /etc/mdadm/mdadm.conf The problem is: After a reboot the array is not available on the path /dev/md0. Instead of that it gets reassembled as /dev/md/0 but it is not very reliable. Has anybody a solution for this issue?

Read the article
Linux stretch cluster: MD replication, DRBD or Veritas?

- by PieterB

For the moment there's a lot of choices for setting up a Linux cluster. For cluster manager: you can use Red Hat Cluster manager, Pacemaker or Veritas Cluster Server. The first one has the most momentum, the second one comes by default with RH subscriptions and the last one is very expensive and has a very good reputation ;-) For storage: - You can replicate LUN's using software raid / md device - You can use the network using DRBD replication, which offers a bit more flexibility - You can use Veritas Storage Foundation technology to talk to your SANs replication technology. Anyone has any recommandations or experience with these technologies?

Read the article
Linux stretch cluster: MD replication, DRBD or Veritas?

- by PieterB

For the moment there's a lot of choices for setting up a Linux cluster. For cluster manager: you can use Red Hat Cluster manager, Pacemaker or Veritas Cluster Server. The first one has the most momentum, the second one comes by default with RH subscriptions and the last one is very expensive and has a very good reputation ;-) For storage: - You can replicate LUN's using software raid / md device - You can use the network using DRBD replication, which offers a bit more flexibility - You can use Veritas Storage Foundation technology to talk to your SANs replication technology. Anyone has any recommandations or experience with these technologies?

Read the article

1 2 3 4 5 6 7 8 9 10 11 12 | Next Page >