Search Results

Search found 345 results on 14 pages for 'microphone'.

Page 1/14 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• External microphone not working

  - by haireefairee

  gnome-volume-control does not recognise external hardware. My headphones work nonetheless, but an external microphone does not. External microphones used to work, but at times were temperamental - I would have to login or logout with or without microphone plugged in. I am running Ubuntu 10.04 LTS (Lucid Lynx) on an mSi U100 wind notebook with one Intel soundcard and trying to use a jack microphone which has worked previously. USB microphones have also been problematic. I have done the basics: Installed upgrades. Checked nothing is muted. Looked for the device on gnome-volume-control. Tried using a different microphone that works on a friends computer. Tested my microphone works when using a different computer. Checked my soundcard can be seen (cat /proc/asound/cards). I have done more complicated things: I have tried playing around with settings in alsamixer. Nothing is muted. I can adjust "mic" and "internal mic" regardless of whether an external microphone is plugged in. I have the choice of input source from "mic", "front mic", "line" and "CD". I've played around changing this and it hasn't helped. I only have one CAPTURE option. In gnome-sound-recorder I have the choice of line, microphone 1 and microphone 2. I have played around changing this option. None of these pick up sound from the external microphone. Microphone 2 is the microphone on my laptop which is bad quality. In gnome-sound-recorder I have the choice of different profiles, and changing this has not helped either. I have looked at gstreamer-properties but none of that seemed helpful. I don't know if there a way to check if these external devices are being picked up. I would like to make an external microphone work. Please help!

  Read the article

• Ubuntu 12.10 Skype cannot use Web Cam Microphone

  - by f.cipriani

  This is making me crazy. After upgrading to Ubuntu 12.10, Skype 4.1.0.20 cannot use my Logitech Web Cam microphone anymore, it keeps using the front panel microphone. I can record correctly from the web cam microphone using the sound recorder the web cam microphone is selected in the sound settings I have tried using pavucontrol I have even shut down pulseaudio and set the web cam microphone device in the skype options manually No matter what, Skype will keep recording using the front panel microphone. Everything was working fine with Ubuntu 12.04 before I upgraded to 12.10. Update: the webcam icon is grayed during calls, even tough everything looks ok in the video options . This makes me think skype has some problems in fully recognizing my web cam.

  Read the article

• No external microphone Acer AO722

  - by Leeghwater

  The ACER AO722 comes with an external mic input, and this input is not recognised by Alsa mixer or Sound (in System Settings). There are various comments on this problem, but no real solutions. For example External Mic not working but Internal Mic works on an Acer Aspiron AO722. Using the internal mic is not an option, as I need to use skype professionally. I have tried everything in alsamixer (accessible through the Terminal Ctrl+Alt+t, command: alsamixer), and in Sound (under System Settings). I have also installed Pulseaudio. But to no avail. The headset is working normally under Skype in Windows. My AO722 came with Windows 7 on it, so I have installed Skype there too. My headset has separate connectors for ears and mic, and these go into the respective output and input on the right side of the laptop. This location: http://bernaerts.dyndns.org/linux/202-ubuntu-acer-ao722 sounds like an effective solution but it is for Ubuntu Natty 11.04. The solution suggested sounds drastic to me: replace the kernel 2.6.38-13 with version 2.6.38-12. I use Ubuntu 12.04, and my kernel is 3.2.0-30-generic-pae. Question: could I try this solution with Ubuntu 12.04? Is this a risky thing to do? I have found harware work around this problem. The audio output seems to be a combi output with also a microphone connection. I have made an adapter for this output. I used a 4 contacts 3,5 mm audio jack plug. To this plug I have soldered 2 female (common stereo) connectors, one for ears and one for the mic of my headset. The 4 contacts jack, which goes into the laptop (in audio OUTput) is wired as follows: tip = hot audio right; first sleeve after tip = hot audio left; second sleeve = common earth (for both ears and microphone); the 3rd sleeve = microphone signal input. In the connector which I could buy, the 3rd sleeve is not so much a sleeve, but part of the metal base of the connector; normally you would expect this one to be connect to earth. But connecting the mic signal to it works. Maybe ready made adapters of this kind and even headsets with a combi jack can simply be purchased; I didn't check. When I plug in the 4 contacts jack, Sound and Alsamixer immediately recognise an external microphone (even if no mic is connected to the adapter). In Sound, under the Input tab, 'Settings for internal microphone' changes into 'Setting for microphone'. The microphone comes through loud and clear, however there is a constant noise in the background. Others have reported this too. If I disconnect the external mic from the adapter, or shortcircuit the external microphone, the noise gets less but does not disappear. Therefore, it is not background noise from the room, but it comes from the computer itself. However, if you talk directly in the microphone of the headset, the noise level is acceptable for VOIP. The headset of my mobile phone Nokia C1 mobile comes wwith a 4 contacts combi 3,5mm jack plug. However, this one works (ear and mic) with the AO722 only if not inserted fully. Possibly the wiring of this headset jack is different. I cannot find detailed specs of the AO722, and don't know whether the audio 'output' was actually designed as a combi input/output. I have seen that at least one other AO model has a combi connector only. In any case, I do not believe that connecting your headset in this way will harm your computer. I would still appreciate a software solution. This must be possible, because the proper microphone input connector works under MS Windows.

  Read the article

• pulseaudio: no microphone configuration

  - by mitsch

  Updated Ubuntu to precise from oneiric on a Dell Inspirion Mini 10 (with an Intel HDA-Soundcard). I can't remember having any issues with the microphone. I didn't need it - I tried ekiga the first time in precise. I couldn't hear any sound in the echo test of ekiga, so I switched to the "System Preferences" and looked for the microphone to boost it. Surprisingly, the microphone input was greyed out - I couldn't mute or unmute, i couldn't even move the volume-slider. On the other hand: I could change the microphone-setting on console with alsamixer, so don't worry about that… :) I just wanted to ask, how to get pulseaudio back to the known, comfortable behaviour. Some newbies won't know the trick to use alsamixer… My soundcard (output of lspci): 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02) Greets!

  Read the article

• combo microphone does not work on Natty.

  - by Senthil Kumaran

  I have a Internal Audio Hardware card and my Laptop (Lenevo IdeaPad) presents a single slot as a combo Microphone and headphone jack. On Windows, I attach my ipod headphone to jack and speak directly to my computer. I assume there is a microphone which is listening to my voice and I can communicate two-way. On Ubuntu, the microphone always seem to be listening to random noise. So any input by speaking to the computer is not possible. What could be the reason and how do I troubleshoot this?

  Read the article

• How do I use my headphones and microphone?

  - by Pavan Kumar

  Hello, The headphones and microphone on my Ubuntu 10.10 work fine. But when I start an audio conversation using empathy or pidgin, my computer hangs, the microphone doesn't work, and I can't record anything. I have tried sudo alsa force-reload, I have installed pavucontrol, but nothing works. I can't increase the volume of the headphones and master channel using alsamixer though they are unmuted. (Everything works fine in Fedora and Windows XP.) How do I fix this? Thank you.

  Read the article

• Lenovo W530 microphone problem

  - by user214245

  Lenovo W530 running Xubuntu 13.10 The microphone appears not to be working. 2 tests made one with audacity and a second with skype. In both instances there appears to be no input. 'Input devices' in the volume control module, also 'recording' indicates background static only. I have opened alsamixer and ensured that everything including microphone boost is set to high. I have tried the changes to alsa-base.conf without success.

  Read the article

• Crackling sound from microphone recently, in 13.04

  - by Patrig Droumaguet

  I use 13.04 since the release and I use Skype which was working well. But recently I've had remarks saying my voice was "crackling", even if the voice from my interlocutor was perfect. Making a test with Audacity and Cheese, I've seen that every recorded sound (with the front microphone of my laptop or a jack microphone) was crackling. It's not really like saturating, the sound has a lot of annoying pops. I've tried to check the settings, they were still on PulseAudio. I've even tried the extreme solution : re-installing Ubuntu (because initially it was working)… with the same problem. If I boot on Windows (dual-boot) I have no problem (so it's not physical). If anyone could help :) My laptop is a HP dv6-6165sf. The sound card is a "IDT 92HD81B1X5" (with BeatsAudio). Thanks a lot ! New tests - july 6th Hi again, I've tried editing /etc/pulse/default.pa with these three settings : load-module module-udev-detect use_ucm=0 tsched=0 load-module module-udev-detect tsched=0 load-module module-udev-detect use_ucm=0 The three of them don't change anything, except the last one (which was by default) which makes Audacity record without any crackling sound. But in Skype, Cheese and Kazam, the sound is crackling… I've installed again Ubuntu 13.04 (from scratch, deleting everything from /home), and I've updated it. The microphone is still cracking. Thanks for your help !

  Read the article

• Skype, green screen, no microphone

  - by EddyThe B

  I have issues with skype using my brand new System 76 Galago Ultrapro, running Ubuntu 13.04. I installed Skype through ubuntu software centre (after allowing Canonical partner stuff), but it won't work, the video is a green screen, and it won't connect to the microphone. The webcam works when using Cheese, and the microphone appears to work in general (it shows sound levels when I go to the Input tab under the Sound settings). I tried to fix the green screen issue using this command: $ echo -e '#!bin/bash n LD_PRELOAD=/usr/lib/i386-linux-gnu/libv4l/v4l1compat.so /usr/bin/skype' | sudo tee /usr/local/bin/skype sudo chmod a+x /usr/local/bin/skype as suggested here: http://debianhelp.wordpress.com/2012/09/28/to-do-list-after-installing-ubuntu-13-04-aka-raring-ringtail-operating-system/ but no luck. Any ideas? I have also asked this question to the System 76 tech support folk.

  Read the article

• How to make my microphone unmuted on startup?

  - by fiktor

  Every time I boot the microphone is muted. I want it to be unmuted instead. Of course I can do it by 6 easy steps every time: press sound icon in the upper right of the screen. press "Sound settings..." item in the bottom. wait about 10 seconds until a window loads. switch to input tab. uncheck "Mute" checkbox near a microphone icon. close the window. But I want it to be unmuted by default. I guess that in linux world this should be changing 0 to 1 in some line in some configuration file, but I don't really know, where is this line located.

  Read the article

• How to set the default Microphone

  - by kmh42

  I am using an external Web-cam with a build-in Microphone. When I am using Skype or some other Software it doesn’t recognise the Microphone automatically. So I always have to activate it myself in the Audio Settings. How can I avoid this and set it as default Web-cam. This PC doesn't have another Webcam or Mic. And the Web-cam is always pluged in. Ubuntu 12.04 beta with latest updates (I also had this problems with 10.04) Logitech, Inc. Web-cam B500

  Read the article

• Microphone not working at all on a Toshiba sattelite p505 s8980

  - by flamingburner

  My built-in microphone doesn't work in "record audio" program and in Skype. I'm using ubuntu 11.10 in Toshiba sattelite p505 s8980. No mute button checked I have PulseAudio Volume Control installed currently when aim trying to use record audio program and hear what I record it plays noisy sound not my voice I changed my computer from 'Analog Stereo Output' to 'Analog Stereo Duplex', in both sound setting ( ubuntu ) and in PulseAudio Volume Control no problem in bios and in my windows seven sound worked perfectly and in ubuntu no problem in sound at all i can play music and movies and even in skype i can hear the sounf of who is taking to me ( it's about the microphone only "

  Read the article

• How to use remote microphone on Remote Desktop

  - by user553702

  I wish to connect to a remote Windows 7 PC that has a microphone, and use that local microphone (on the destination PC) in recording applications. Unfortunately whenever I connect on Remote Desktop, the remote PC's local microphones become hidden and disabled. Remote Desktop seems to force using the source computer's microphone with redirection, without an option to use the remote PC's microphone Isn't there a way to enable using the remote PC's microphone? I don't get why this should be so hard.

  Read the article

• Dell Latitude E6420 in-built microphone not working

  - by user38845

  I'm running with Ubuntu 12.04 64bit on Dell Latitude E6420. The inbuilt microphone is not working, and is not listed on the sound settings dialog. According to lspci, the device is: 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) I've also looked at alsamixer, and can see a "mic" and "dock mic" but fiddling with these and increasing to max amplification doesn't appear to change anything. Note: I've raised a certification question on the same topic here: https://answers.launchpad.net/ubuntu-certification/+question/200678

  Read the article

• Rosetta Stone Network V3 doesn't recognize built-in microphone in OSX Lion

  - by zarose

  I am using Rosetta Stone Network V3 on an early 2011 MacBook Pro running OSX Lion 10.7.3. When I log in, select a language and level, and then a lesson, I am prompted to select a microphone. The built in microphone doesn't show up, yet I've used it multiple times for other applications. I heard from another user that it doesn't work if headphones with a built-in microphone are used. I have not yet tried a USB microphone. Is there some free work around to this? I would prefer to not have to buy a USB microphone, but if that is the only solution, then I'll live. Edit: I noticed that Rosetta Stone tells me that if I don't have a microphone I should disable speech to move on, but that option is grayed out for me.

  Read the article

• Acer Aspire microphone issue

  - by Dr_Bunsen

  I have got an Acer Aspire 7750G: More info It has been running Ubuntu since I bought the laptop (12.10 as of now), but a few updates ago, I lost my microphone. It doesn't recognise the internal mic or the mic jack (although alsa seems to recognise it). I have been looking around, and I fixed it, but this was only temporary, after a reboot my mic was gone again. I haven't been able to find the fix, so I wanted to know whatever you guys know what I have to do to fix this. Thanks in advance.

  Read the article

• Logitech Microphone (AK5370) inaudible volume

  - by Iain Lane

  I bought this microphone from Amazon last week. It's detected just fine in 12.10. I can see it in the sound preferences. The problem is that the volume is so low as to be inaudible, even when turned up to maximum in this dialog. It is working, as I can see that the meter responds to noise, but it's just too low. alsamixer's control is the same, so that doesn't help. I tried messing around in pulseaudio too, but to no avail. In lsusb it's Bus 002 Device 004: ID 0556:0001 Asahi Kasei Microsystems Co., Ltd AK5370 I/F A/D Converter.

  Read the article

• Microphone problem in Ubuntu 11.10

  - by Teja

  I am using both Windows 7 and Ubuntu 11.10 on a single system with the same hardware. While I'm making call through Gmail or Skype my voice is audible to others while I'm on Windows 7, but while I'm on Ubuntu 11.10 it's not audible to others, but I am able to hear their voice. But while I'm playing music on Ubuntu along with a call, the others are able to hear the music, but my voice is not audible for them. Please give me a solution for this and tell me where I can change the microphone settings on Ubuntu 11.10.

  Read the article

• Microphone not capturing sound on 12.04 Lenovo G580

  - by Yam Marcovic

  In both Skype and the Sound Recorder application, I am not capturing any audio from my built-in microphone. I'm not sure why. Otherwise, sound output is working well. I have tried running gstreamer-properties and setting the Default Input plugin to PulseAUdio as well (to match the output), and it didn't help. I have tried running alsamixer -V all and I only get 2 input-related entries: Capture(L R) which is on 100 and not muted (can't be either), and Analog Mic Boost which is on 20db. Extra info: Camera (video) is working well on Skype and Kamerka. Can you please help me get my microphone to work? lspci: 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) Subsystem: Lenovo Device 3977 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) (prog-if 00 [VGA controller]) Subsystem: Lenovo Device 3977 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 42 Region 0: Memory at e0000000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 3000 [size=64] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) (prog-if 30 [XHCI]) Subsystem: Lenovo Device 3977 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 41 Region 0: Memory at e0600000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: xhci_hcd 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) Subsystem: Lenovo Device 3977 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 43 Region 0: Memory at e0614000 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied> Kernel driver in use: mei Kernel modules: mei 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) (prog-if 20 [EHCI]) Subsystem: Lenovo Device 3977 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at e0619000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) Subsystem: Lenovo Device 3977 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 44 Region 0: Memory at e0610000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: e0500000-e05fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 2 (rev c4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: e0400000-e04fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) (prog-if 20 [EHCI]) Subsystem: Lenovo Device 3977 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at e0618000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) Subsystem: Lenovo Device 3977 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel modules: iTCO_wdt 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) (prog-if 01 [AHCI 1.0]) Subsystem: Lenovo Device 3977 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 40 Region 0: I/O ports at 3088 [size=8] Region 1: I/O ports at 3094 [size=4] Region 2: I/O ports at 3080 [size=8] Region 3: I/O ports at 3090 [size=4] Region 4: I/O ports at 3060 [size=32] Region 5: Memory at e0617000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) Subsystem: Lenovo Device 3977 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 10 Region 0: Memory at e0615000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 3040 [size=32] Kernel modules: i2c-i801 01:00.0 Ethernet controller: Atheros Communications Inc. AR8162 Fast Ethernet (rev 08) Subsystem: Lenovo Device 3979 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at e0500000 (64-bit, non-prefetchable) [size=256K] Region 2: I/O ports at 2000 [size=128] Capabilities: <access denied> 02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) Subsystem: Lenovo Device 31a1 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at e0400000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: ath9k Kernel modules: ath9k aplay -l **** List of PLAYBACK Hardware Devices **** card 0: PCH [HDA Intel PCH], device 0: CONEXANT Analog [CONEXANT Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0

  Read the article

• Microphone on a Dell Vostro 3360

  - by Pilb

  After upgrading my vostro 3360 on Ubuntu 12.04, I saw that drivers were not available for this version (notably for network). So I decided to install 11.10 but the mic still doesn't work (notably on Skype, Gtalk etc.) I join the model of the audio device and the drivers which were installed before I upgraded to ubuntu 12.04 (I succeeded only in installing the network one) Can you help me to find the solution to this problem with my microphone? Thanks , Pilb. Message in French : Bonjour, Après que je me sois rendu compte d'une anomalie dans la gestion du micro (sous Gtalk), j'ai essayé différentes solutions sans succès (1 2 et 3) Mon ordinateur dell vostro 3360 m'a été livré sous ubuntu 11.10, j'ai voulu le mettre sous 12.04 mais les drivers n'étaient pas compatibles. Je suis donc revenu sur Oneiric mais sans les drivers installés par Dell en usine. néanmoins, j'ai pris soin de noter leurs références (sans toutefois savoir si le micro fonctionne avec ces pilotes, mais cela me semble possible). Pourriez-vous me dire s'il est possible d'installer ces pilotes ? Ou alors si vous avez une solution concernant ce problème de micro ? Modèle de la carte son : Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) Alsa-hda-cirrus-oneiric driver in DKMS format (notamment) Dell-laptop-oneiric friver in DKMS format ethernet-alx oneiric driver in DKMS format Je vous remercie d'avance de votre aide et vous souhaite une bonne journée ! Pilb.

  Read the article

• Dell Mini 9 Integrated Microphone -- not working

  - by Josh Eismanaf

  Im running the latest Debian version, 6.0 on my Dell Mini 9.Webcam and sound work, but microphone is a no-go. I hope even though it is Debian, fellow Linux users can help. In Alsamixer (1.0.23), I have Capture, Digital, and Mic settings all the way up. There are no options for adjusting "Front" mic settings. (May have been for older alsamixer versions?) In Sound Recorder, playback has loud noise/feedback? Under Preferences in Volume Control under the Recording tab, both Capture and Digital are permanently checked, regardless if I uncheck them. I'm not sure how to interpret the above, but I am just trying to offer as much relevant background information as I can. I've been scouring forums for the answer, but to no avail. Most questions/answers are from 2008, and couldn't find a solution. I'm not very handy with the Linux machine, but love to learn / am learning. Also, I've attempted the solution here, and it didn't work. Thanks, in advance, for your help!

  Read the article

• Problems with microphone and network

  - by AnoonymoouS

  Hello... very good day everybody! I'm having some problems regarding the Ubuntu 12.4.01 LTS. For this reason, cordially i ask everyone's help. Such problems can be summed up in network (01) and audio (02)! 01) I can not set a DSL network settings in the "upper bar" (on side the clock). When i create the connection, the system says that the cables modem are disconnected! I can only use the internet if i set up a connection at terminal through the command "pppoeconf". Follows the print screen of what i mentioned above:. http://i.imgur.com/8nTrF.png Obs.: Note that even after the connection "created", it does not appear there! 02) The sound is reproduced; however, can not be captured! I can not make recordings, obviously i can't use the microphone. I believe that something is giving interference or the settings are wrong! Follows the video of what i mentioned above:. http://dl.dropbox.com/u/41085750/Projeto%20Padr%C3%A3o.mp4 Obs.: I'm listening to music, so that interference errors may appear in the video. By kindness; who can help me... help me! I sought help at various sites and forums but unfortunately, i did not get success. I wait anxiously for a direction. Regards, Anoonymoous.

  Read the article

• Microphone not recognised on my TekNmotion Intruder headset?

  - by Mitch Gardner

  I own a TekNmotion Intruder headset and Ubuntu 12.04 doesn't seem to even notice that my mic exists. I just re-installed Ubuntu and that doesn't seem to help either. They are a bit of a no-name brand and I can't find drivers for them. The audio plays clearly through the head phones but my mic wont record using "Record my desktop", Works rarely with Skype, and doesn't even show up when I go to Sound Settings ---- Input. Help please!

  Read the article

• Microphone doesn't give any input, yet music does

  - by user52643

  I've tried a few guides but nothing works as of yet. I've tried two microphones, both of which work on my Vista setup but do nothing on Ubuntu. Nothing is on mute both on the Sound utility or Skype (which I'm trying to use my mic for). I've been informed that when my speakers are playing very load, this can be heard on the other end of a call, too. See link for cat /proc/asound/card0/codec#0 results which are apparently relevant... _' N.B. I am noob x

  Read the article

• microphone volume control from javascript

  - by paleozogt

  I'd like to be able to control the system microphone volume from the browser. I know that the microphone can be recorded from using Flash or Silverlight, but these don't allow control of the microphone volume. (Flash has Microphone.gain, but as its just a software multiplier, it doesn't help when the system mic volume is muted or too loud.) I've heard that HTML5 will have some sort of microphone access, but whether it will allow volume control is unclear to me. At any rate, I don't think any browsers support it yet. Are there any plugins that would allow volume control? The old Google Gears project has some AudioApi docs, though these don't seem to have made it into the actual plugin. There's also the Google Talk plugin- it seems to do some kind of gain control, but its unclear if there's an api to the plugin. Perhaps there's a draft HTML5 implementation plugin for microphone access (like indexeddb, for example)?

  Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >