Search Results

Search found 149 results on 6 pages for 'mohammad sajad'.

Page 1/6 | 1 2 3 4 5 6  | Next Page >

  • UDP multicast streaming of media content over WIFI

    - by sajad
    I am using vlc to stream media content over wireless network in scenario like this (from content streamer to stream receiver client): The bandwidth of wireless network is 54 Mb/s and UDP stream's required bandwidth is only 4 Mb/s; however there is trouble in receiving media stream and quality of playing specifically in multicast mode; means I can play the stream but it has jitter and does not play smoothly. In uni-cast I can stream up to 5 media streams correctly, but in multicast mode there is problem with streaming just one media! However when I stream from client some multicast streams; the wifi access-point can receive data correctly and I can see the video in "udp streamer" side correctly even when number of multicast streams increases to 9; But as you see I want to stream from streaming server and receive media in client size. Is this a typical problem of streaming real-time contents over wireless networks? Is it necessary to change configurations of my WIFI switch or it is just a software trouble? thank you

    Read the article

  • the more DVDs at the same time , the slower the burning!

    - by sajad
    hi i'm using nero to burn multi DVDs at the same time. When i burn 1 DVD at one time it takes about 8 mins to finish. but when i try to burn 4 DVDs at the same time, it takes about 40 mins! why does it take too longe to burn multi DVDs at the same time? i don't have any problem with hardware because when i'm burning dvds , less than 20 % of my cpu & RAM are in use. thx in advance.

    Read the article

  • UDP multicast streaming of media content over WIFI

    - by sajad
    I am using vlc to stream media content over wireless network in scenario like this (from content streamer to stream receiver client): The bandwidth of wireless network is 54 Mb/s and UDP stream's required bandwidth is only 4 Mb/s; however there is trouble in receiving media stream and quality of playing specifically in multicast mode; means I can play the stream but it has jitter and does not play smoothly. In uni-cast I can stream up to 5 media streams correctly, but in multicast mode there is problem with streaming just one media! However when I stream from client some multicast streams; the wifi access-point can receive data correctly and I can see the video in "udp streamer" side correctly even when number of multicast streams increases to 9; But as you see I want to stream from streaming server and receive media in client size. Is this a typical problem of streaming real-time contents over wireless networks? Is it necessary to change configurations of my WIFI switch or it is just a software trouble? thank you

    Read the article

  • Employee Info Starter Kit - Visual Studio 2010 and .NET 4.0 Version (4.0.0) Available

    - by Mohammad Ashraful Alam
    Employee Info Starter Kit is a ASP.NET based web application, which includes very simple user requirements, where we can create, read, update and delete (crud) the employee info of a company. Based on just a database table, it explores and solves most of the major problems in web development architectural space.  This open source starter kit extensively uses major features available in latest Visual Studio, ASP.NET and Sql Server to make robust, scalable, secured and maintanable web applications quickly and easily. Since it's first release, this starter kit achieved a huge popularity in web developer community and includes 1,40,000+ download from project web site. Visual Studio 2010 and .NET 4.0 came up with lots of exciting features to make software developers life easier.  A new version (v4.0.0) of Employee Info Starter Kit is now available in both MSDN Code Gallery and CodePlex. Chckout the latest version of this starter kit to enjoy cool features available in Visual Studio 2010 and .NET 4.0. [ Release Notes ] Architectural Overview Simple 2 layer architecture (user interface and data access layer) with 1 optional cache layer ASP.NET Web Form based user interface Custom Entity Data Container implemented (with primitive C# types for data fields) Active Record Design Pattern based Data Access Layer, implemented in C# and Entity Framework 4.0 Sql Server Stored Procedure to perform actual CRUD operation Standard infrastructure (architecture, helper utility) for automated integration (bottom up manner) and unit testing Technology UtilizedProgramming Languages/Scripts Browser side: JavaScript Web server side: C# 4.0 Database server side: T-SQL .NET Framework Components .NET 4.0 Entity Framework .NET 4.0 Optional/Named Parameters .NET 4.0 Tuple .NET 3.0+ Extension Method .NET 3.0+ Lambda Expressions .NET 3.0+ Aanonymous Type .NET 3.0+ Query Expressions .NET 3.0+ Automatically Implemented Properties .NET 3.0+ LINQ .NET 2.0 + Partial Classes .NET 2.0 + Generic Type .NET 2.0 + Nullable Type   ASP.NET 3.5+ List View (TBD) ASP.NET 3.5+ Data Pager (TBD) ASP.NET 2.0+ Grid View ASP.NET 2.0+ Form View ASP.NET 2.0+ Skin ASP.NET 2.0+ Theme ASP.NET 2.0+ Master Page ASP.NET 2.0+ Object Data Source ASP.NET 1.0+ Role Based Security Visual Studio Features Visual Studio 2010 CodedUI Test Visual Studio 2010 Layer Diagram Visual Studio 2010 Sequence Diagram Visual Studio 2010 Directed Graph Visual Studio 2005+ Database Unit Test Visual Studio 2005+ Unit Test Visual Studio 2005+ Web Test Visual Studio 2005+ Load Test Sql Server Features Sql Server 2005 Stored Procedure Sql Server 2005 Xml type Sql Server 2005 Paging support

    Read the article

  • 3G USB Modem Not Working in 12.04

    - by Seyed Mohammad
    When I connect my 3G USB Modem to my laptop with 12.04, nothing shows up in Network-Manager. This modem is working in 11.10 and the modem is shown in Network-Manager but not in 12.04 !! Here are the outputs of lsusb and usb-devices on two machines , one with 11.10 and the other with 12.04 : Ubuntu-11.10 : $ lsusb Bus 002 Device 009: ID 1c9e:6061 $ usb-devices T: Bus=02 Lev=02 Prnt=02 Port=03 Cnt=01 Dev#= 9 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1c9e ProdID=6061 Rev=00.00 S: Manufacturer=3G USB Modem ?? S: SerialNumber=000000000002 C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage Ubuntu-12.04 : $ lsusb Bus 002 Device 003: ID 1c9e:6061 OMEGA TECHNOLOGY WL-72B 3.5G MODEM $ usb-devices T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1c9e ProdID=6061 Rev=00.00 S: Manufacturer=Qualcomm, Incorporated S: Product=USB MMC Storage S: SerialNumber=000000000002 C: #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) As the output of the above commands show, the device is detected as a modem in 11.10 but in 12.04 it is detected as a USB storage (the device is both a 3G Modem and a SD-card USB adapter). Any help ?!

    Read the article

  • Getting Started with Employee Info Starter Kit (v4.0.0)

    - by Mohammad Ashraful Alam
    The new release of Employee Info Starter Kit contains lots of exciting features available in Visual Studio 2010 and .NET 4.0. To get started with the new version, you will need less than 5 minutes. Minimum System Requirements Before getting started, please make sure you have installed Visual Studio 2010 RC (or higher) and Sql Server 2005 Express edition (or higher installed on your machine. Running the Starter Kit for First Time 1. Download the starter kit 4.0.0 version form here and extract it. 2. Go to <extraction folder>\Source\Eisk.Solution and click the solution file 3. From the solution explorer, right click the “Eisk.Web” web site project node and select “Set as Startup Project” and hit Ctrl + F5   4. You will be prompted to install database, just follow the instruction. That’s it! You are ready to use this starter kit. Running the Tests Employee Info Starter Kit contains a infrastructure for Integration and Unit Testing, by utilizing cool test tools in Visual Studio 2010. Once you complete the steps, mentioned above, take a minute to run the test cases on the fly. 1. From the solution explorer, to go “Solution Items\e-i-s-k-2010.vsmdi” and click it. You will see the available Tests in the Visual Studio Test Lists. Select all, except the “Load Tests” node (since Load Tests takes a bit time) 2. Click “Run Checked Tests” control from the upper left corner. You will see the tests running and finally the status of the tests, which indicates the current health of you application from different scenarios. Technorati Tags: asp.net,architecture,starter kit,employee info starter kit,visual studio 2010,.net 4.0,entity framework

    Read the article

  • .NETTER Code Starter Pack v1.0.beta Released

    - by Mohammad Ashraful Alam
    .NETTER Code Starter Pack contains a gallery of Visual Studio 2010 solutions leveraging latest and new technologies released by Microsoft. Each Visual Studio solution included here is focused to provide a very simple starting point for cutting edge development technologies and framework, using well known Northwind database. The current release of this project includes starter samples for the following technologies: ASP.NET Dynamic Data QuickStart (TBD) Azure Service Platform Windows Azure Hello World Windows Azure Storage Simple CRUD Database Scripts Entity Framework 4.0 (TBD) SharePoint 2010 Visual Web Part Linq QuickStart Silverlight Business App Hello World WCF RIA Services QuickStart Utility Framework MEF Moq QuickStart T-4 QuickStart Unity QuickStart WCF WCF Data Services QuickStart WCF Hello World WorkFlow Foundation Web API Facebook Toolkit QuickStart Download link: http://codebox.codeplex.com/releases/view/57382 Technorati Tags: release,new release,asp.net,mef,unity,sharepoint,wcf

    Read the article

  • How to uninstall Ubuntu 12.04 LTS ( installed alongside Win 7 from Boot CD)

    - by Mohammad Yaseen
    A few days back I installed Ubuntu 12.04 alongside windows. When I put the CD in, the setup said that I should boot from CD and then I can choose from demo to install Ubuntu alongside Windows, I followed the instruction and selected Install alongside Windows 7 from the setup wizard. My Win 7 drive is originally 60 GB but after installing Ubuntu it appears as if it were 43 GB. Now I want to UNINSTALL Ubuntu and get just Win 7 back on. Please guide me how to do this. Presently, at start-up I get a choice to Boot either into Win 7 or Ubuntu. I am new to Ubuntu and Linux both! This is the partition layout as seen on Win 7 :

    Read the article

  • How to boot with Intel GMA500 Poulsbo graphics

    - by Seyed Mohammad
    I have a Sony VAIO netbook with Intel GMA-500 Poulsbo Graphics and I'm trying to boot the latest Ubuntu-12.04 Beta-2 using a bootable USB. According to this Ubuntu-Wiki, support for Intel GMA-500 Poulsbo graphics is promising in Precise-Beta2 and should work out of the box. Of course the wiki talks about a problem when booting from USB and states that restarting X using: sudo service lightdm restart will bring a functional graphical desktop, but nothing happens for me! Any help is highly appreciated.

    Read the article

  • System reverts to 87Hz refresh rate at every startup after I have installed nvidia drivers

    - by Mohammad Kamil Nadeem
    Every time the system starts the screen's refresh rate reverts to 87Hz which results in a pixelated and flickery screen which I have to manually correct every time by either selecting 60Hz as my refresh rate. I have tried "save to X configuration files" and even tried by making the changes as Root but to no avail as it again reverts to 87Hz on every system startup The Open Source Drivers are Okay for regular Unity but many games don't work on it hence I had to install the nvidia drivers. I have been facing this since the Beta Phase although this is on a fresh installation of 12.04 final release. I am also providing my Xorg.conf file just in case it might help http://paste.ubuntu.com/952196/ Also for some reason Displays shows my CRT monitor as Laptop but on open source drivers it was mentioning it as a 14" CRT only This bug is also present on Edubuntu 12.04 This is not present on Xubuntu 12.04 I had selected to install updates and 3rd party software on the install and was greeted with a correct refresh rate screen on the Boot Up. I like Xubuntu.

    Read the article

  • T-4 Templates for ASP.NET Web Form Databound Control Friendly Logical Layers

    - by Mohammad Ashraful Alam
    I just released an open source project at codeplex, which includes a set of T-4 templates that will enable you to build ASP.NET Web Form Data Bound controls friendly testable logical layer based on Entity Framework 4.0 with just few clicks! In this open source project you will get Entity Framework 4.0 based T-4 templates for following types of logical layers: Data Access Layer: Entity Framework 4.0 provides excellent ORM data access layer. It also includes support for T-4 templates, as built-in code generation strategy in Visual Studio 2010, where we can customize default structure of data access layer based on Entity Framework. default structure of data access layer has been enhanced to get support for mock testing in Entity Framework 4.0 object model. Business Logic Layer: ASP.NET web form based data bound control friendly business logic layer, which will enable you few clicks to build data bound web applications on top of ASP.NET Web Form and Entity Framework 4.0 quickly with great support of mock testing. Download it to make your web development productive. Enjoy!

    Read the article

  • Problem booting 12.04-Beta2 with Intel GMA500 Poulsbo graphics

    - by Seyed Mohammad
    I have a Sony VAIO netbook with Intel GMA-500 Poulsbo Graphics and I'm trying to boot the latest Ubuntu-12.04 Beta-2 using a bootable USB. According to this Ubuntu-Wiki, support for Intel GMA-500 Poulsbo graphics is promising in Precise-Beta2 and should work out of the box. Of course the wiki talks about a problem when booting from USB and states that restarting X using: sudo service lightdm restart will bring a functional graphical desktop, but nothing happens for me! Any help is highly appreciated.

    Read the article

  • How to make Connect Communications VPN connection in 10.10?

    - by Bilal Mohammad Qazi
    these steps were send by my iSP admin for ver10.10 and i'm using 11.10... step 1 sucessfully implemented till point 7 after that the problems are marked after '//' Step 2 i cannot completely do the step 2 How to make Connect Communications VPN connection in Ubuntu 10.10. 1st Step:- 1- Go to System > Administration > Synaptic Package Manage 2- Search for “PPTP”, check “network-manager-PPTP” and click “Apply” 3- Click on the Network Manager tray icon with your right mouse button and choose “Edit Connections…”. 4- Go to the “VPN” tab and click “Add”. 5- Choose “Point-to-Point Tunneling Protocol (PPTP)” as the VPN Connection Type 6- Check the VPN Connection Type and click “Create”. 7- Give your VPN connection a name and assign all the necessary information • Gateway = blue.connect.net.pk if you got Blue Package or • Gateway = green.connect.net.pk if you got Green Package or • Gateway = blueplus.connect.net.pk if you got BluePlus Package or • Gateway = red.connect.net.pk if you got Red Package • User name = Connect Communications Userid • Password = Connect Communications Password 8- Now Click on “Advanced” Authentication • Unchecked “PAP" // cannot uncheck • Unchecked “MSCHAP" // cannot uncheck • Unchecked “CHAP" • Checked only “MSCHAPv2" EAP shown in ver11.10 and cannot be unchecked Security And Compression. • Unchecked “Use Point-to-Point encryption (MPPE)”. • Unchecked “Allow statefull encryption”. • Unchecked “Allow BSD data Compression”. • Unchecked “Allow Deflate data Compression”. • Unchecked “Use TCP Header Compression”. • Unchecked “Send PPP echo Packets” Then Press “OK” then “Apply”. 9-Now you are able to connect to the specified VPN connection via the Networking Manager Then you can connect to VPN in the menu bar and your Internet icon will have a lock when the connection is successful. 2nd Step:- Open Terminal window. First, you open a terminal (Applications > Accessories > Terminal): Run command “sudo” Now gave root Password. Then run command “netstat -r -n” It will show some lines and for example from the last line pick the IP from 2nd column like 10.111.0.1 0.0.0.0 10.111.0.1 0.0.0.0 UG 0 0 0 eth0 Now run the fallowing command. echo “route add -net 10.101.8.0 netmask 255.255.252.0 gw 10.152.24.1” > /etc/rc.local note :- 10.111.0.1 is an example IP now run “ sh /etc/rc.local “

    Read the article

  • Server certificate problem with Cisco AnyConnect VPN Client

    - by Mohammad Moghimi
    When I try to connect using the Cisco AnyConnect VPN Client, I receive this error: Connection attempt has failed due to server certificate problem. I happened to have this problem in my previous Ubuntu 11.10 installation. That time I could fix it using some tutorials on the internet (I don't remember which one). Basically, they suggested installing 4-5 packages and then some ln -s. But this time none of them are working. Can anyone help me step by step?

    Read the article

  • "Unable to locate package" errors for all software

    - by Mohammad Hosain Safari
    My apt-get doesn't install any programs. I try to install programs with apt-get install but always it shows same error: unable to locate package. For example I try to install the xbmc media center; here's what happens: $ sudo apt-get install xbmc Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package xbmc I have updated my package list with sudo apt-get update.

    Read the article

  • Poor System performance on my machine running Ubuntu 12.04(Beta 2 updated to the present moment)

    - by Mohammad Kamil Nadeem
    Why is it that my system dies when multitasking(it is happening from 11.10) on Ubuntu11.10(Unity), Kubuntu 11.10(KDE) and Deepin Linux which is based on 11.10(Gnome-Shell) The thing is that I thought with 12.04 I would get performance like I used to get on 11.04 on which everything used to run fine without any lag or hiccups. The same lagging(Browser starts to stutter, increased delay in the launching of dash and applications)is happening on 12.04 http://i.imgur.com/YChKB.png and http://i.imgur.com/uyXLA.png . I believe that my system configuration is sufficient for running Ubuntu as you can check here http://paste.ubuntu.com/929734/ . I had the Google voice and chat plugin installed on 12.04 so someone suggested that I should remove that and see if the performance improves but no such respite(I am having this on multiple operating system based on Ubuntu 11.10 as I have mentioned above). On a friends suggestion Ran Memory Test through Partition Magic and my system passed that fine. One thing more that I would like to know is that why when I have 2Gb Ram and 2.1GB swap does my system starts lag and run poorly when Ram consumption goes 500+. If you require anymore information I will gladly provide it.

    Read the article

  • Problem running Qreator on Xubuntu-14.04

    - by Seyed Mohammad
    I installed Qreator using apt-get on Xubuntu-14.04: $ sudo apt-get install qreator But the application fails to start! When I try to run it via Terminal, the following error messages are printed and the program aborts: $ qreator ** (qreator:3859): WARNING **: Couldn't connect to accessibility bus: Failed to connect to socket /tmp/dbus-Gh2FPHrMr2: Connection refused No handlers could be found for logger "qreator_lib" Traceback (most recent call last): File "/usr/bin/qreator", line 47, in <module> qreator.main() File "/usr/lib/python2.7/dist-packages/qreator/__init__.py", line 63, in main window = QreatorWindow.QreatorWindow() File "/usr/lib/python2.7/dist-packages/qreator_lib/Window.py", line 48, in __new__ new_object.finish_initializing(builder) File "/usr/lib/python2.7/dist-packages/qreator/QreatorWindow.py", line 79, in finish_initializing self.init_qr_types() File "/usr/lib/python2.7/dist-packages/qreator/QreatorWindow.py", line 135, in init_qr_types self.qr_types = [d(self.update_qr_code) for d in QRCodeType.dataformats] File "/usr/lib/python2.7/dist-packages/qreator/qrcodes/QRCodeType.py", line 71, in __init__ self.create_widget() # pylint: disable=E1101 File "/usr/lib/python2.7/dist-packages/qreator/qrcodes/QRCodeLocation.py", line 29, in create_widget self.widget = QRCodeLocationGtk(self.qr_code_update_func) File "/usr/lib/python2.7/dist-packages/qreator/qrcodes/QRCodeLocationGtk.py", line 49, in __init__ latitude, longitude = get_current_location() File "/usr/lib/python2.7/dist-packages/qreator/qrcodes/QRCodeLocationGtk.py", line 109, in get_current_location '/org/freedesktop/Geoclue/Providers/Hostip') File "/usr/lib/python2.7/dist-packages/dbus/bus.py", line 241, in get_object follow_name_owner_changes=follow_name_owner_changes) File "/usr/lib/python2.7/dist-packages/dbus/proxies.py", line 248, in __init__ self._named_service = conn.activate_name_owner(bus_name) File "/usr/lib/python2.7/dist-packages/dbus/bus.py", line 180, in activate_name_owner self.start_service_by_name(bus_name) File "/usr/lib/python2.7/dist-packages/dbus/bus.py", line 278, in start_service_by_name 'su', (bus_name, flags))) File "/usr/lib/python2.7/dist-packages/dbus/connection.py", line 651, in call_blocking message, timeout) dbus.exceptions.DBusException: org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.Geoclue.Providers.Hostip was not provided by any .service files How can I fix this ?

    Read the article

  • Computer / Software Engineering vs Other Engineering Disciplines [closed]

    - by Mohammad Yaseen
    Since this was a rather specific question, I have tried my best to present this question in a format which fits the style of this site. Please comment if it can be improved further. I have to choose the Engineering discipline on 6th Nov. My interest is in Robotics, hardware-level programming, Artificial Intelligence and back-end programming. I am currently working as a freelance developer using mainly PHP and occasionally working with GWT.I am somewhat familiar with C# and Python too. I am not super good at programming but I do like it. I am thinking to choose Computer and Information Systems Engineering as this is what I love but all the eggheads of my city are going to Mechanical Engineering and when I ask one of them Why are you choosing this? They say It's my interest and for job and the money. Basically I am confused between CIS and Mechanical Engineering, specifically the job market for both. Since this is a programmers' site I think following questions will be relevant . I am asking this because I want to take advice from professionals in this field before diving too deep . Are you happy with your job / work and pay. Are you satisfied with the work environment and career growth Do you feel OK (or great?) about the near and/or distant future of your industry. Why should a person choose Computer if he has other choices i.e what this industry has to offer in particular which other fields of work don't This industry is subject to rapid changes and you have to learn continuously throughout your entire career. Does this learning and constant hard work pay off ? In my country there is no hardware manufacturing. So most of CIS graduates (like Software Engineers) work in Software Houses. What is the scenario in your country. Is a degree titled 'Software' necessary or companies will take Computer Engineers too if they have relevant experience. I am asking this because I plan to move abroad for work. This is going to be something which I'll do for the rest of my life so I am a bit confused about the right choice. You can view the course outline for both programmes below. Computer and Information Systems Engineering. Mechanical Engineering

    Read the article

  • Employee Info Starter Kit: Project Mission

    - by Mohammad Ashraful Alam
    Employee Info Starter Kit is an open source ASP.NET project template that is intended to address different types of real world challenges faced by web application developers when performing common CRUD operations. Using a single database table ‘Employee’, it illustrates how to utilize Microsoft ASP.NET 4.0, Entity Framework 4.0 and Visual Studio 2010 effectively in that context. Employee Info Starter Kit is highly influenced by the concept ‘Pareto Principle’ or 80-20 rule. where it is targeted to enable a web developer to gain 80% productivity with 20% of effort with respect to learning curve and production. User Stories The user end functionalities of this starter kit are pretty simple and straight forward that are focused in to perform CRUD operation on employee records as described below. Creating a new employee record Read existing employee record Update an existing employee record Delete existing employee records Key Technology Areas ASP.NET 4.0 Entity Framework 4.0 T-4 Template Visual Studio 2010 Architectural Objective There is no universal architecture which can be considered as the best for all sorts of applications around the world. Based on requirements, constraints, environment, application architecture can differ from one to another. Trade-off factors are one of the important considerations while deciding a particular architectural solution. Employee Info Starter Kit is highly influenced by the concept ‘Pareto Principle’ or 80-20 rule, where it is targeted to enable a web developer to gain 80% productivity with 20% of effort with respect to learning curve and production. “Productivity” as the architectural objective typically also includes other trade-off factors as well as, such as testability, flexibility, performance etc. Fortunately Microsoft .NET Framework 4.0 and Visual Studio 2010 includes lots of great features that have been implemented cleverly in this project to reduce these trade-off factors in the minimum level. Why Employee Info Starter Kit is Not a Framework? Application frameworks are really great for productivity, some of which are really unavoidable in this modern age. However relying too many frameworks may overkill a project, as frameworks are typically designed to serve wide range of different usage and are less customizable or editable. On the other hand having implementation patterns can be useful for developers, as it enables them to adjust application on demand. Employee Info Starter Kit provides hundreds of “connected” snippets and implementation patterns to demonstrate problem solutions in actual production environment. It also includes Visual Studio T-4 templates that generate thousands lines of data access and business logic layer repetitive codes in literally few seconds on the fly, which are fully mock testable due to language support for partial methods and latest support for mock testing in Entity Framework. Why Employee Info Starter Kit is Different than Other Open-source Web Applications? Software development is one of the rapid growing industries around the globe, where the technology is being updated very frequently to adapt greater challenges over time. There are literally thousands of community web sites, blogs and forums that are dedicated to provide support to adapt new technologies. While some are really great to enable learning new technologies quickly, in most cases they are either too “simple and brief” to be used in real world scenarios or too “complex and detailed” which are typically focused to achieve a product goal (such as CMS, e-Commerce etc) from "end user" perspective and have a long duration learning curve with respect to the corresponding technology. Employee Info Starter Kit, as a web project, is basically "developer" oriented which actually considers a hybrid approach as “simple and detailed”, where a simple domain has been considered to intentionally illustrate most of the architectural and implementation challenges faced by web application developers so that anyone can dive into deep into the corresponding new technology or concept quickly. Roadmap Since its first release by 2008 in MSDN Code Gallery, Employee Info Starter Kit gained a huge popularity in ASP.NET community and had 1, 50,000+ downloads afterwards. Being encouraged with this great response, we have a strong commitment for the community to provide support for it with respect to latest technologies continuously. Currently hosted in Codeplex, this community driven project is planned to have a wide range of individual editions, each of which will be focused on a selected application architecture, framework or platform, such as ASP.NET Webform, ASP.NET Dynamic Data, ASP.NET MVC, jQuery Ajax (RIA), Silverlight (RIA), Azure Service Platform (Cloud), Visual Studio Automated Test etc. See here for full list of current and future editions.

    Read the article

  • Announcement: Employee Info Starter Kit (v5.0) is Released

    - by Mohammad Ashraful Alam
    Ever wanted to have a simple jQuery menu bound with ASP.NET web site map file? Ever wanted to have cool css design stuffs implemented on your ASP.NET data bound controls? Ever wanted to let Visual Studio generate logical layers for you, which can be easily tested, customized and bound with ASP.NET data controls? If your answers with respect to above questions are ‘yes’, then you will probably happy to try out latest release (v5.0) of Employee Starter Kit, which is intended to address different types of real world challenges faced by web application developers when performing common CRUD operations. Using a single database table ‘Employee’, the current release illustrates how to utilize Microsoft ASP.NET 4.0 Web Form Data Controls, Entity Framework 4.0 and Visual Studio 2010 effectively in that context. Employee Info Starter Kit is an open source ASP.NET project template that is highly influenced by the concept ‘Pareto Principle’ or 80-20 rule, where it is targeted to enable a web developer to gain 80% productivity with 20% of effort with respect to learning curve and production. This project template is titled as “Employee Info Starter Kit”, which was initially hosted on Microsoft Code Gallery and been downloaded 1, 50,000+ of copies afterword.  The latest version of this starter kit is hosted in Codeplex. Release Highlights User End Functional Specification The user end functionalities of this starter kit are pretty simple and straight forward that are focused in to perform CRUD operation on employee records as described below. Creating a new employee record Read existing employee records Update an existing employee record Delete existing employee records Architectural Overview Simple 3 layer architecture (presentation, business logic and data access layer) ASP.NET web form based user interface Built-in code generators for logical layers, implemented in Visual Studio default template engine (T4) Built-in Entity Framework entities as business entities (aka: data containers) Data Mapper design pattern based Data Access Layer, implemented in C# and Entity Framework Domain Model design pattern based Business Logic Layer, implemented in C# Object Model for Cross Cutting Concerns (such as validation, logging, exception management) Minimum System Requirements Visual Studio 2010 (Web Developer Express Edition) or higher Sql Server 2005 (Express Edition) or higher Technology Utilized Programming Languages/Scripts Browser side: JavaScript Web server side: C# Code Generation Template: T-4 Template Frameworks .NET Framework 4.0 JavaScript Framework: jQuery 1.5.1 CSS Framework: 960 grid system .NET Framework Components .NET Entity Framework .NET Optional/Named Parameters (new in .net 4.0) .NET Tuple (new in .net 4.0) .NET Extension Method .NET Lambda Expressions .NET Anonymous Type .NET Query Expressions .NET Automatically Implemented Properties .NET LINQ .NET Partial Classes and Methods .NET Generic Type .NET Nullable Type ASP.NET Meta Description and Keyword Support (new in .net 4.0) ASP.NET Routing (new in .net 4.0) ASP.NET Grid View (CSS support for sorting - (new in .net 4.0)) ASP.NET Repeater ASP.NET Form View ASP.NET Login View ASP.NET Site Map Path ASP.NET Skin ASP.NET Theme ASP.NET Master Page ASP.NET Object Data Source ASP.NET Role Based Security Getting Started Guide To see Employee Info Starter Kit in action is pretty easy! Download the latest version. Extract the file. From the extracted folder click the C# project file (Eisk.Web.csproj) to open it in Visual Studio 2010 Hit Ctrl+F5! The current release (v5.0) of Employee Info Starter Kit is properly packaged, fully documented and well tested. If you want to learn more about it in details, just check the following links: Release Home Page Installation Walkthrough Hand on Coding Walkthrough Technical Reference Enjoy!

    Read the article

  • How do I install an older 2.6.37 Kernel Version?

    - by Seyed Mohammad
    I have a Sony VAIO P netbook and for several issues (graphics driver, audio driver and power management), I want to install an older version of the Linux kernel on Ubuntu 11.10 (actually its Xubuntu) that seems to be much more suitable. So I searched for Ubuntu kernels and found this link which includes all versions of the Linux kernel distributed by Ubuntu. I am looking for a version before 2.6.38 (to escape the known power management issue) and of course solve my many driver problems! I guess my best bet is 2.6.37 but there are several 2.6.37.x-x kernels! Can someone point me to the right choice? In each folder (for example: this one) there are several DEB packages. Which packages should I install? (Note: I have a 32-bit system) What is the installation process? sudo dpkg -i *.deb ? Is this fine or additional steps are required? Thanks.

    Read the article

  • Unable to decide weather to continue or quit and start a new carrier

    - by latif mohammad khan
    I am working in a small company. I have joined here for java developer ,but they told as i am fresher so work as Android developer . Then i asked one of my lecturer about Android developement.then he replied why going for mobile developement which is not standard(as nokia's symbain lost , mobile os changes quickly ) its better to get job as Java Developer. By listening his words i was bit not satisfied with my job and thought of leaving Job and search as java developer. But i dont have much confidence to search a job at that time(because i got job after 1 and half years after i passed out), i have decided to work as android developer(as learning new technology and practice java at home). On the first day they introduced me to team leads and they assigned under him. After few days i came to know that my team lead is having only 1 year experience. He(my team lead) joined here as a fresher and done r&d now is my Team lead. If i ask any doubt to him , he just search in internet and reply's my question (some times he explains wrongly) i correct it by myself by searching in net.In my company they don't use latest technologies,they dont follow any design patterns because they dont know them. They provide me very less pay and more work, i dont bother about pay because i am fresher but i bother about work which is not use(I feel like that because they dont use latest technologies,no design patterns,no proper team lead) What i thought was to learn from the company, Team leads how the project done. But there I feel like, i am wasting my time.If i go for another interview in future they ask latest technologies. Now i dont know what to do weather to quit the job and learn another language which have good demand like sap abap or to continue here. please provide me advice Thanks.

    Read the article

  • Sharing the effect

    - by Mohammad Ahmed
    my problem is : If I load 2 models ( the same model zombie ) and give them the same effect I got the following error : for(int i =0 ; i<2 ; i++) { dwarfModel[i].model = Content.Load<Model>("Models//dwarf//dwarfmodel"); dwarfModel[i].effect = Content.Load<Effect>("Models//dwarf//skinFX"); dwarfModel[i].setEffect(camera , game); dwarfModel[i].setModelAnimationStatus(game); dwarfModel[i].intializeChrachterController(new Vector3(0, 0, 0), 20, 10, 2000, 2000, 80, 40); space.Add(dwarfModel[i].chrachterController); dwarfModels.Add(dwarfModel); } enter code here

    Read the article

  • How to set-up DSL dialer for Ubuntu 12.04 LTS

    - by Mohammad Yaseen
    I have just installed Ubuntu 12.04 LTS and I'm unable to get my DSL dialer working properly. To set this up in Windows 7 I had to do following: Control Panel --- Network and Intertnet Network and sharing center --- Setup a new network or connection Connect to the internet --- Broadband PPPoE Enter username and Password.. CLick 'Connect' and Done. I am doing following steps in Ubuntu with no luck: Click on 'Two Arrows' (i don't know what they are called) on upper right corner. Configure VPN --- DSL tab --- Add Then I entered username, password, MAC address and Clone MAC address (copied from Auto Ethernet). Save The same set up used to work with Ubuntu 10.10 but it is not working here. Now whenever I click on DSL Connection 1 to connect dialer 'Auto Ethernet' gets disconneted and I end up with no Internet connection. I am new to Ubuntu, Please suggest some easy steps. I have installed ubuntu alongside windows. And dialer works fine in Windows environment, i am writing this in Windows .

    Read the article

1 2 3 4 5 6  | Next Page >