Search Results

Search found 44 results on 2 pages for 'ndepend'.

Page 1/2 | 1 2  | Next Page >

• NDepend 4 – First Steps

  - by Ricardo Peres

  Introduction Thanks to Patrick Smacchia I had the chance to test NDepend 4. I can only say: awesome! This will be the first of a series of posts on NDepend, where I will talk about my discoveries. Keep in mind that I am just starting to use it, so more experienced users may find these too basic, I just hope I don’t say anything foolish! I must say that I am in no way affiliated with NDepend and I never actually met Patrick. Installation No installation program – a curious decision, I’m not against it -, just unzip the files to a folder and run the executable. It will optionally register itself with Visual Studio 2008, 2010 and 11 as well as RedGate’s Reflector; also, it automatically looks for updates. NDepend can either be used as a stand-alone program (with or without a GUI) or from within Visual Studio or Reflector. Getting Started One thing that really pleases me is the Getting Started section of the stand-alone, with links to pages on NDepend’s web site, featuring detailed explanations, which usually include screenshots and small videos (<5 minutes). There’s also an How do I with hierarchical navigation that guides us to through the major features so that we can easily find what we want. Usage There are two basic ways to use NDepend: Analyze .NET solutions, projects or assemblies; Compare two versions of the same assembly. I have so far not used NDepend to compare assemblies, so I will first talk about the first option. After selecting a solution and some of its projects, it generates a single HTML page with an highly detailed report of the analysis it produced. This includes some metrics such as number of lines of code, IL instructions, comments, types, methods and properties, the calculation of the cyclomatic complexity, coupling and lots of others indicators, typically grouped by type, namespace and assembly. The HTML also includes some nice diagrams depicting assembly dependencies, type and method relative proportions (according to the number of IL instructions, I guess) and assembly analysis relating to abstractness and stability. Useful, I would say. Then there’s the rules; NDepend tests the target assemblies against a set of more than 120 rules, grouped in categories Code Quality, Object Oriented Design, Design, Architecture and Layering, Dead Code, Visibility, Naming Conventions, Source Files Organization and .NET Framework Usage. The full list can be configured on the application, and an explanation of each rule can be found on the web site. Rules can be validated, violated and violated in a critical manner, and the HTML will contain the violated rules, their queries – more on this later - and results. The HTML uses some nice JavaScript effects, which allow paging and sorting of tables, so its nice to use. Similar to the rules, there are some queries that display results for a number (about 200) questions grouped as Object Oriented Design, API Breaking Changes (for assembly version comparison), Code Diff Summary (also for version comparison) and Dead Code. The difference between queries and rules is that queries are not classified as passes, violated or critically violated, just present results. The queries and rules are expressed through CQLinq, which is a very powerful LINQ derivative specific to code analysis. All of the included rules and queries can be enabled or disabled and new ones can be added, with intellisense to help. Besides the HTML report file, the NDepend application can be used to explore all analysis results, compare different versions of analysis reports and to run custom queries. Comparison to Other Analysis Tools Unlike StyleCop, NDepend only works with assemblies, not source code, so you can’t expect it to be able to enforce brackets placement, for example. It is more similar to FxCop, but you don’t have the option to analyze at the IL level, that is, other that the number of IL instructions and the complexity. What’s Next In the next days I’ll continue my exploration with a real-life test case. References The NDepend web site is http://www.ndepend.com/. Patrick keeps an updated blog on http://codebetter.com/patricksmacchia/ and he regularly monitors StackOverflow for questions tagged NDepend, which you can find on http://stackoverflow.com/questions/tagged/ndepend. The default list of CQLinq rules, queries and statistics can be found at http://www.ndepend.com/DefaultRules/webframe.html. The syntax itself is described at http://www.ndepend.com/Doc_CQLinq_Syntax.aspx and its features at http://www.ndepend.com/Doc_CQLinq_Features.aspx.

  Read the article

• NDepend tool – Why every developer working with Visual Studio.NET must try it!

  - by hajan

  In the past two months, I have had a chance to test the capabilities and features of the amazing NDepend tool designed to help you make your .NET code better, more beautiful and achieve high code quality. In other words, this tool will definitely help you harmonize your code. I mean, you’ve probably heard about Chaos Theory. Experienced developers and architects are already advocates of the programming chaos that happens when working with complex project architecture, the matrix of relationships between objects which simply even if you are the one who have written all that code, you know how hard is to visualize everything what does the code do. When the application get more and more complex, you will start missing a lot of details in your code… NDepend will help you visualize all the details on a clever way that will help you make smart moves to make your code better. The NDepend tool supports many features, such as: Code Query Language – which will help you write custom rules and query your own code! Imagine, you want to find all your methods which have more than 100 lines of code :)! That’s something simple! However, I will dig much deeper in one of my next blogs which I’m going to dedicate to the NDepend’s CQL (Code Query Language) Architecture Visualization – You are an architect and want to visualize your application’s architecture? I’m thinking how many architects will be really surprised from their architectures since NDepend shows your whole architecture showing each piece of it. NDepend will show you how your code is structured. It shows the architecture in graphs, but if you have very complex architecture, you can see it in Dependency Matrix which is more suited to display large architecture Code Metrics – Using NDepend’s panel, you can see the code base according to Code Metrics. You can do some additional filtering, like selecting the top code elements ordered by their current code metric value. You can use the CQL language for this purpose too. Smart Search – NDepend has great searching ability, which is again based on the CQL (Code Query Language). However, you have some options to search using dropdown lists and text boxes and it will generate the appropriate CQL code on fly. Moreover, you can modify the CQL code if you want it to fit some more advanced searching tasks. Compare Builds and Code Difference – NDepend will also help you compare previous versions of your code with the current one at one of the most clever ways I’ve seen till now. Create Custom Rules – using CQL you can create custom rules and let NDepend warn you on each build if you break a rule Reporting – NDepend can automatically generate reports with detailed stats, graph representation, dependency matrixes and some additional advanced reporting features that will simply explain you everything related to your application’s code, architecture and what you’ve done. And that’s not all. As I’ve seen, there are many other features that NDepend supports. I will dig more in the upcoming days and will blog more about it. The team who built the NDepend have also created good documentation, which you can find on the NDepend website. On their website, you can also find some good videos that will help you get started quite fast. It’s easy to install and what is very important it is fully integrated with Visual Studio. To get you started, you can watch the following Getting Started Online Demo and Tutorial with explanations and screenshots. If you are interested to know more about how to use the features of this tool, either visit their website or wait for my next blogs where I will show some real examples of using the tool and how it helps make your code better. And the last thing for this blog, I would like to copy one sentence from the NDepend’s home page which says: ‘Hence the software design becomes concrete, code reviews are effective, large refactoring are easy and evolution is mastered.’ Website: www.ndepend.com Getting Started: http://www.ndepend.com/GettingStarted.aspx Features: http://www.ndepend.com/Features.aspx Download: http://www.ndepend.com/NDependDownload.aspx Hope you like it! Please do let me know your feedback by providing comments to my blog post. Kind Regards, Hajan

  Read the article

• NDepend v4 has just been released!

  - by Vincent Maverick Durano

  Few months ago I blogged about the release of NDepend v3 Continuous Integration and Reporting Capabilities here. Recently, the NDepend team has released v4 which comes with code rules based on C# LINQ queries (CQLinq), this make code ruling so much more powerful and flexible. There are couple of new rules available like: http://www.ndepend.com/DefaultRules/webframe?Q_UI_layer_shouldn't_use_directly_DB_types.html http://www.ndepend.com/DefaultRules/webframe?Q_Types_with_disposable_instance_fields_must_be_disposable.html http://www.ndepend.com/DefaultRules/webframe?Q_Avoid_the_Singleton_pattern.html http://www.ndepend.com/DefaultRules/webframe?Q_Avoid_making_complex_methods_even_more_complex_(Source_CC).html v4 also provides NDepend.API and a dozen of open-source code tool developed with NDepend.API (the Power Tools) http://www.ndepend.com/API/webframe.html

  Read the article

• Installation experiences with NDepend under Win7/64 with restricted user permissions

  - by Marko Apfel

  Today Patrick gives me a new license for his static code analysis tool NDepend for my fresh machine with Win7/64. This platform is new for me, so some things are different to Win XP. Maybe that till yet some of these things are not well enough understandanded from me. So i stepped in some traps. Here are my notes to get NDepend running. Download of NDepend Professional Edition from http://www.ndepend.com/NDependDownload.aspx   Extracted to c:\program files (x86)\NDepend   Started NDepend.Install.VisualStudioAddin.exe this failed with Okay – sounds plausible.   Copy NDependProLicense.xml to this folder   Next try with NDepend.Install.VisualStudioAddin.exe opens the integration dialog   Registering in Visual Studio failed with   Manually unblock as described (first solution hint)   and here comes my largest understanding problem. After unblocking this file   and closing this dialog the next opening shows the blocking again: Why? So the same error during integration pops up.   Okay – tried the second solution hint with copying folders Copy all to a full accessable folder under c:\temp\   Now the installation works   looks good   copying the folders back to c:\program files (x86)\NDepend   starting Visual Studio failed with     Okay – copying the folder to a private application folder c:\users\apf\My Applications\NDepend   Installing again   Now Visual Studio runs and NDepend is integrated Nevertheless my machine is only used by me, i prefer “all user”-installations. The described way works sadly only for my account.

  Read the article

• Ndepend reports not showing up in CruiseControl Dashboard

  - by Premkumar

  I am currently in the process of setting up ndepend report generation as part of Continuous Integration build process using CruiseControl.Net, I have followed the instructions outlined in ThoughtWorks Website. The ndepend tasks runs fine and the reports are generated correctly but when I goto the dashboard and try to bring up the ndepend reports, nothing comes up (it displays blank). Does the cruisecontrol dashboard application expects the ndepend report in a particular file under the working folder or the artifact folder ?

  Read the article

• NDepend 4.0 Released

  - by Anthony Trudeau

  Last week version 4.0 of NDepend was released.  NDepend is a Visual Studio add-in designed for intense code analysis with the goal of high quality code.  A month ago I wrapped up my evaluation of the previous version of NDepend. The new version contains many minor changes, several bug fixes, and adds about 50 new code rules.  The version also adds support for Visual Studio 11, .NET Framework 4.5, and SilverLight 5.0.  But, the biggest change was the shift from CQL to CQLinq. Introducing CQLinq The latest version replaces the CQL rules language with CQLinq (CQL is still an option although the editor is buried).  As you might guess CQLinq is a flavor of Linq designed specifically for the code rules. The best way to illustrate the differences is with an example.  I used the following CQL example in Part 3 of my review: WARN IF Count > 0 IN SELECT TYPES WHERE IsInterface AND !NameLike “I” This same query looks like this when implemented in CQLinq: warnif count > 0 from t in Types where t.IsInterface == true && !t.NameLike(“I”) select t I like the syntax and it is a natural fit, but I found writing the queries frustrating in the Queries and Rules Edit window.  The Queries and Rules Edit window replaces the CQL Query Edit window.  The new editor has the same style of Intellisense as the previous editor.  However, it has a few annoyances.  The error indicator is a red block.  It has the tendency of obscuring your cursor.  Additionally, writing CQLing queries is like writing plain old Linq queries, so the fact that the editor uses Enter to select from Intellisense instead of Tab is jarring.  These issues can be an obstacle to writing queries quickly.CQLinq makes it possible to write rules that weren't possible before.  Additionally, a JustMyCode domain is now possible making it easy to eliminate generated code from the analysis.Should you Buy? I recommend NDepend overall.  It has some rough points for me that I have detailed in my earlier evaluation (starting here).  But, it’s definitely worth the money.  The bigger question is: should I pay for the upgrade to 4.0?  At this point I’m on the fence, but I would go for it if you need support for Visual Studio 2011, .NET Framework 4.5, or Silverlight 5.0; or if you need one of the many rules that weren't possible before CQLinq. Disclaimer: Patrick Smacchia contacted me about reviewing NDepend. I received a free license in return for sharing my experiences and talking about the capabilities of the add-in on this site. There is no expectation of a positive review elicited from the author of NDepend. Resources: NDepend Release Notes

  Read the article

• Do you use NDepend?

  - by Karsten

  Hi I've been trying out NDepend, been reading a few blogposts about it and even heard a podcast. I think that NDepend might be a really useful tool, but I still don't see where I would use it. How do you use it? Do you use it, why? why not? I would like to hear about some down to earth real world examples.

  Read the article

• NDepend Evaluation: Part 3

  - by Anthony Trudeau

  NDepend is a Visual Studio add-in designed for intense code analysis with the goal of high code quality. NDepend uses a number of metrics and aggregates the data in pleasing static and active visual reports. My evaluation of NDepend will be broken up into several different parts. In the first part of the evaluation I looked at installing the add-in.  And in the last part I went over my first impressions including an overview of the features.  In this installment I provide a little more detail on a few of the features that I really like. Dependency Matrix The dependency matrix is one of the rich visual components provided with NDepend.  At a glance it lets you know where you have coupling problems including cycles.  It does this with number indicating the weight of the dependency and a color-coding that indicates the nature of the dependency. Green and blue cells are direct dependencies (with the difference being whether the relationship is from row-to-column or column-to-row).  Black cells are the ones that you really want to know about.  These indicate that you have a cycle.  That is, type A refers to type B and type B also refers to Type A. But, that’s not the end of the story.  A handy pop-up appears when you hover over the cell in question.  It explains the color, the dependency, and provides several interesting links that will teach you more than you want to know about the dependency. You can double-click the problem cells to explode the dependency.  That will show the dependencies on a method-by-method basis allowing you to more easily target and fix the problem.  When you’re done you can click the back button on the toolbar. Dependency Graph The dependency graph is another component provided.  It’s complementary to the dependency matrix, but it isn’t as easy to identify dependency issues using the window. On a positive note, it does provide more information than the matrix. My biggest issue with the dependency graph is determining what is shown.  This was not readily obvious.  I ended up using the navigation buttons to get an acceptable view.  I would have liked to choose what I see. Once you see the types you want you can get a decent idea of coupling strength based on the width of the dependency lines.  Double-arrowed lines are problematic and are shown in red.  The size of the boxes will be related to the metric being displayed.  This is controlled using the Box Size drop-down in the toolbar.  Personally, I don’t find the size of the box to be helpful, so I change it to Constant Font. One nice thing about the display is that you can see the entire path of dependencies when you hover over a type.  This is done by color-coding the dependencies and dependants.  It would be nice if selecting the box for the type would lock the highlighting in place. I did find a perhaps unintended work-around to the color-coding.  You can lock the color-coding in by hovering over the type, right-clicking, and then clicking on the canvas area to clear the pop-up menu.  You can then do whatever with it including saving it to an image file with the color-coding. CQL NDepend uses a code query language (CQL) to work with your code just like it was a database.  CQL cannot be confused with the robustness of T-SQL or even LINQ, but it represents an impressive attempt at providing an expressive way to enumerate and interrogate your code. There are two main windows you’ll use when working with CQL.  The CQL Query Explorer allows you to define what queries (rules) are run as part of a report – I immediately unselected rules that I don’t want in my results.  The CQL Query Edit window is where you can view or author your own rules.  The explorer window is pretty self-explanatory, so I won’t mention it further other than to say that any queries you author will appear in the custom group. Authoring your own queries is really hard to screw-up.  The Intellisense-like pop-ups tell you what you can do while making composition easy.  I was able to create a query within two minutes of playing with the editor.  My query warns if any types that are interfaces don’t start with an “I”. WARN IF Count > 0 IN SELECT TYPES WHERE IsInterface AND !NameLike “I” The results from the CQL Query Edit window are immediate. That fact makes it useful for ad hoc querying.  It’s worth mentioning two things that could make the experience smoother.  First, out of habit from using Visual Studio I expect to be able to scroll and press Tab to select an item in the list (like Intellisense).  You have to press Enter when you scroll to the item you want.  Second, the commands are case-sensitive.  I don’t see a really good reason to enforce that. CQL has a lot of potential not just in enforcing code quality, but also enforcing architectural constraints that your enterprise has defined. Up Next My next update will be the final part of the evaluation.  I will summarize my experience and provide my conclusions on the NDepend add-in. ** View Part 1 of the Evaluation ** ** View Part 2 of the Evaluation ** Disclaimer: Patrick Smacchia contacted me about reviewing NDepend. I received a free license in return for sharing my experiences and talking about the capabilities of the add-in on this site. There is no expectation of a positive review elicited from the author of NDepend.

  Read the article

• Download NDepend Analysis Tool

  - by Editor

  NDepend is a tool that simplifies managing a complex .NET code base. Architects and developers can analyze code structure, specify design rules, plan massive refactoring, do effective code reviews and master evolution by comparing different versions of the code. The result is better communication, improved quality, easier maintenance and faster development. NDepend supports the Code Query Language [...]

  Read the article

• Ndepend CQL to query types out of assembly wildcard

  - by icelava

  In order to determine what low-level framework types a web application is directly using, one has to define each and every assembly involved. SELECT TYPES FROM ASSEMBLIES "Company.System.Framework", "Company.System.Framework.ReferenceLookup", "Company.System.Framework.Web", "Company.System.Framework.Security", "Company.System.Framework.Logging", "Company.System.Framework.DMS" WHERE IsDirectlyUsedBy "WebAssembly" I cannot find any syntax to wildcard the list of assemblies. Is there no way to shortcut this? We have a lot of framework level assemblies. i.e. Company.System.Framework.*

  Read the article

• NDepend query methods/types in framework assembly being used by other assemblies/types

  - by icelava

  I am trying to determine which types or methods in a base framework assembly are being used by other assemblies in the application system. I cannot seem to find a straight-cut query to do that. What i have to do is first determine which assemblies are directly using the framework assembly, then manually list them in a second query SELECT TYPES FROM ASSEMBLIES "IBM.Data.DB2" WHERE IsDirectlyUsedBy "ASSEMBLY:FirstDirectUsedByAssebmly" OR IsDirectlyUsedBy "ASSEMBLY:SecondDirectUsedByAssebmly" OR IsDirectlyUsedBy "ASSEMBLY:ThirdDirectUsedByAssebmly" OR IsDirectlyUsedBy "ASSEMBLY:FourthDirectUsedByAssebmly" Is there a better/faster way to query for this? Additionally, the query results are focused on the matched types only. The Dependency graph or matrix exported only shows details of those. I do not know how to render a graph that shows those types or methods plus show the dependent types/methods from other assemblies that are consuming them?

  Read the article

• Ndepend CQL to find methods of certain types using particular framework assembly

  - by icelava

  In order to check if types not derived from certain base classes are using a low-level framework assembly, the following query can be used. SELECT TYPES WHERE IsDirectlyUsing "ASSEMBLY:Framework.Data" AND !(DeriveFrom "App.BaseTypes.BusinessFacadeBase" OR DeriveFrom "App.BaseTypes.BusinessComponentBase" OR DeriveFrom "App.BaseTypes.DataAccessComponentBase") Now I wish to drill down further to see which methods from those classes are actually doing so. But the thing is if I change the query target from TYPES to METHODS then DeriveFrom is not going to apply. How can these criteria be preserved?

  Read the article

• Have you used nDepend?

  - by Nick Harrison

  Have you Used NDepend? I have often wanted to use it, but never spent the money on it.   I have developed many tools that try to do pieces of what NDepend does, but never with as much success as they reach. Put simply, it is a tool that will allow you to udnerstand and monitor the architecture of your software, and it does it in some pretty amazing ways. One of the most impressive features is something that they call Code Query Language.   It allows you to write queries very similar to SQL to track the performance of various software metrics and use this to identify areas that are out of compliance with your standards and architecture. For instance, once you have analyzed your project, you can write queries such as : SELECT METHODS WHERE IsPublic AND CouldBePrivate  You can also set up such queries to provide warnings if there are records returned.    You can incorporae this into your daily build and compare build against build. There are over 82 metrics included to allow you to view your code in a variety of angles. I have often advocated for a "Code Inventory" database to track the state of software and the ROI on software investments.    This tool alone will take you about 90% of the way there. If you are not using it yet,  I strongly recommend that you do!

  Read the article

• NDepend: How to not display 'tier' assemblies in dependency graph?

  - by Edward Buatois

  I was able to do this in an earlier version of nDepend by going to tools-options and setting which assemblies would be part of the analysis (and ignore the rest). The latest version of the trial version of nDepend lets me set it, but it seems to ignore the setting and always analyze all assemblies whether I want it to or not. I tried to delete the "tier" assemblies by moving them over to the "application assemblies" list, but when I delete them out of there, they just get added back to the "tier" list, which I can't ignore. I don't want my dependency graph to contain assemblies like "system," "system.xml," and "system.serialization!" I want only MY assemblies in the dependency graph! Or is that a paid-version feature now? Is there a way to do what I'm talking about?

  Read the article

• NDepend: How to not display 'tier' assemblies in dependency graph?

  - by Edward Buatois

  I was able to do this in an earlier version of nDepend by going to tools-options and setting which assemblies would be part of the analysis (and ignore the rest). The latest version of the trial version of nDepend lets me set it, but it seems to ignore the setting and always analyze all assemblies whether I want it to or not. I tried to delete the "tier" assemblies by moving them over to the "application assemblies" list, but when I delete them out of there, they just get added back to the "tier" list, which I can't ignore. I don't want my dependency graph to contain assemblies like "system," "system.xml," and "system.serialization!" I want only MY assemblies in the dependency graph! Or is that a paid-version feature now? Is there a way to do what I'm talking about?

  Read the article

• Do you know any alternative to NDepend for architects?

  - by ifesdjeen

  Hi! do you know any software similar to NDepend? I've got it just recently, and found it very useful. It helped me a lot, but for now i don't have a possibility to buy a proffessional version. So, is there any alternative (maybe, open-source)? Preferrably, free. But not necessarily. Maybe, with a little bit more fitting price for a single-developer, not a team. Requirements for this software: Build dependency diagrams Retrieve code metrics Display comments coverage (so far)

  Read the article

• [News] NDepend 3.0 en version b?ta, 100% int?gr? dans Visual Studio 2010

  Patrick Smacchia nous annonce la disponibilit? de NDepend V3 en b?ta. Cette version s'int?gre d?sormais dans Visual Studio .NET (2008, 2005 et 2010!). Vous pouvez d?couvrir sur le site de NDepend les copies d'?crans et les nouveaut?s. Un gros travail a aussi ?t? apport? aux performances. Voil? un bel outil ? acqu?rir pour Microsoft ...

  Read the article

• Resolving MSB3247 - Found conflicts between different versions of the same dependent assembly

  - by David Gardiner

  A .NET 3.5 solution ended up with this warning when compiling with msbuild. Sometimes NDepend might help out but in this case it didn't give any further details. Like Bob I ended up having to resort to opening each assembly in ILDASM until I found the one that was referencing an older version of the dependant assembly. I did try using MSBUILD from VS 2010 Beta 2 (as the Connect article indicated this was fixed in the next version of the CLR) but that didn't provide any more detail either (maybe fixed post Beta 2) Is there a better (more automated) approach?

  Read the article

• Setting up NCover for NUnit in FinalBuilder

  - by Lasse V. Karlsen

  I am attempting to set up NCover for usage in my FinalBuilder project, for a .NET 4.0 C# project, but my final coverage output file contains no coverage data. I am using: NCover 3.3.2 NUnit 2.5.4 FinalBuilder 6.3.0.2004 All tools are the latest official as of today. I've finally managed to coax FB into running my unit tests under NCover for the .NET 4.0 project, so I get Tests run: 184, ..., which is correct. However, the final Coverage.xml file output from NCover is almost empty, and looks like this: <?xml version="1.0" encoding="utf-8"?> <!-- saved from NCover 3.0 Export url='http://www.ncover.com/' --> <coverage profilerVersion="3.3.2.6211" driverVersion="3.3.2" exportversion="3" viewdisplayname="" startTime="2010-04-22T08:55:33.7471316Z" measureTime="2010-04-22T08:55:35.3462915Z" projectName="" buildid="27c78ffa-c636-4002-a901-3211a0850b99" coveragenodeid="0" failed="false" satisfactorybranchthreshold="95" satisfactorycoveragethreshold="95" satisfactorycyclomaticcomplexitythreshold="20" satisfactoryfunctionthreshold="80" satisfactoryunvisitedsequencepoints="10" uiviewtype="TreeView" viewguid="C:\Dev\VS.NET\LVK.IoC\LVK.IoC.Tests\bin\Debug\Coverage.xml" viewfilterstyle="None" viewreportstyle="SequencePointCoveragePercentage" viewsortstyle="Name"> <rebasedpaths /> <filters /> <documents> <doc id="0" excluded="false" url="None" cs="" csa="00000000-0000-0000-0000-000000000000" om="0" nid="0" /> </documents> </coverage> The output in FB log is: ... ***************** End Program Output ***************** Execution Time: 1,5992 s Coverage Xml: C:\Dev\VS.NET\LVK.IoC\LVK.IoC.Tests\bin\Debug\Coverage.xml NCover Success My configuration of the FB step for NCover: NCover what?: NUnit test coverage Command: C:\Program Files (x86)\NUnit 2.5.4\bin\net-2.0\nunit-console.exe Command arguments: LVK.IoC.Tests.dll /noshadow /framework:4.0.30319 /process=single /nothread Note: I've tried with and without the /process and /nothread options Working directory: %FBPROJECTDIR%\LVK.IoC.Tests\bin\Debug List of assemblies to profile: %FBPROJECTDIR%\LVK.IoC.Tests\bin\Debug\LVK.IoC.dll Note: I've tried just listing the name of the assembly, both with and without the extension. The documentation for the FB step doesn't help, as it only lists minor sentences for each property, and fails to give examples or troubleshooting hints. Since I want to pull the coverage results into NDepend to run build-time analysis, I want that file to contain the information I need. I am also using TestDriven, and if I right-click the solution file and select "Test with NCover", NCover-explorer opens up with coverage data, and if I ask it to show me the folder with coverage files, in there is an .xml file with the same structure as the one above, just with all the data that should be there, so the tools I have is certainly capable of producing it. Has anyone an idea of what I've configured wrong here?

  Read the article

• Visual Studio not recognizing "BuildStep"

  - by AmbiguousX

  I'm trying to add an automatic post-build trigger to run NDepend after an automated team build in TFS 2010. NDepend's website provided code for integrating this capability, and so I have pasted their code into my .csproj file where they said for it to go, but I receive errors on the build. The errors refer to two of the three "BuildStep" tags I have in the code snippet. The following two snippets are giving me errors: <BuildStep TeamFoundationServerUrl="$(TeamFoundationServerUrl)" BuildUri="$(BuildUri)" Message="Running NDepend analysis"> <Output TaskParameter="Id" PropertyName="StepId" /> </BuildStep> and <BuildStep TeamFoundationServerUrl="$(TeamFoundationServerUrl)" BuildUri="$(BuildUri)" Id="$(StepId)" Status="Failed" /> However, this code snippet is NOT throwing up any problems: <BuildStep TeamFoundationServerUrl="$(TeamFoundationServerUrl)" BuildUri="$(BuildUri)" Id="$(StepId)" Status="Succeeded" /> I just don't understand why one works fine and a nearly identically laid out BuildStep tag does not. Is there something simple that I'm just overlooking? EDIT: Here is how it looks all together, if this makes a difference: <Target Name="NDepend" > <PropertyGroup> <NDPath>c:\tools\NDepend\NDepend.console.exe</NDPath> <NDProject>$(SolutionDir)MyProject.ndproj</NDProject> <NDOut>$(TargetDir)NDepend</NDOut> <NDIn>$(TargetDir)</NDIn> </PropertyGroup> <Exec Command='"$(NDPath)" "$(NDProject)" /OutDir "$(NDOut)" /InDirs "$(NDIn)"'/> </Target> <Target Name="AfterBuild"> <BuildStep TeamFoundationServerUrl="$(TeamFoundationServerUrl)" BuildUri="$(BuildUri)" Message="Running NDepend analysis"> <Output TaskParameter="Id" PropertyName="StepId" /> </BuildStep> <PropertyGroup> <NDPath>c:\tools\NDepend\NDepend.console.exe</NDPath> <NDProject>$(SolutionRoot)\Main\src\MyProject.ndproj</NDProject> <NDOut>$(BinariesRoot)\NDepend</NDOut> <NDIn>$(BinariesRoot)\Release</NDIn> </PropertyGroup> <Exec Command='$(NDPath) "$(NDProject)" /OutDir "$(NDOut)" /InDirs "$(NDIn)"'/> <BuildStep TeamFoundationServerUrl="$(TeamFoundationServerUrl)" BuildUri="$(BuildUri)" Id="$(StepId)" Status="Succeeded" /> <OnError ExecuteTargets="MarkBuildStepAsFailed" /> </Target> <Target Name="MarkBuildStepAsFailed"> <BuildStep TeamFoundationServerUrl="$(TeamFoundationServerUrl)" BuildUri="$(BuildUri)" Id="$(StepId)" Status="Failed" /> </Target> EDIT: Added a bounty because I really need to get this going for my team. Thank you in advance!

  Read the article

• TFS Check in rules

  - by NPehrsson

  Hi I'm out of setting up an TFS server and I want to set some check-in rules. I for example want to be able to set rules about method lenght, complexity and so on, I found NDepend very convenient can I somehow use NDepend to run some rules on the files trying to check in. I also want to be able to bypass the rules sometimes. Are there any blogs or discussions around this, if it wont work with NDepend are there any other tools or ways I can use?

  Read the article

• Code Metrics: Number of IL Instructions

  - by DigiMortal

  In my previous posting about code metrics I introduced how to measure LoC (Lines of Code) in .NET applications. Now let’s take a step further and let’s take a look how to measure compiled code. This way we can somehow have a picture about what compiler produces. In this posting I will introduce you code metric called number of IL instructions. NB! Number of IL instructions is not something you can use to measure productivity of your team. If you want to get better idea about the context of this metric and LoC then please read my first posting about LoC. What are IL instructions? When code written in some .NET Framework language is compiled then compiler produces assemblies that contain byte code. These assemblies are executed later by Common Language Runtime (CLR) that is code execution engine of .NET Framework. The byte code is called Intermediate Language (IL) – this is more common language than C# and VB.NET by example. You can use ILDasm tool to convert assemblies to IL assembler so you can read them. As IL instructions are building blocks of all .NET Framework binary code these instructions are smaller and highly general – we don’t want very rich low level language because it executes slower than more general language. For every method or property call in some .NET Framework language corresponds set of IL instructions. There is no 1:1 relationship between line in high level language and line in IL assembler. There are more IL instructions than lines in C# code by example. How much instructions there are? I have no common answer because it really depends on your code. Here you can see some metrics from my current community project that is developed on SharePoint Server 2007. As average I have about 7 IL instructions per line of code. This is not metric you should use, it is just illustrative example so you can see the differences between numbers of lines and IL instructions. Why should I measure the number of IL instructions? Just take a look at chart above. Compiler does something that you cannot see – it compiles your code to IL. This is not intuitive process because you usually cannot say what is exactly the end result. You know it at greater plain but you don’t know it exactly. Therefore we can expect some surprises and that’s why we should measure the number of IL instructions. By example, you may find better solution for some method in your source code. It looks nice, it works nice and everything seems to be okay. But on server under load your fix may be way slower than previous code. Although you minimized the number of lines of code it ended up with increasing the number of IL instructions. How to measure the number of IL instructions? My choice is NDepend because Visual Studio is not able to measure this metric. Steps to make are easy. Open your NDepend project or create new and add all your application assemblies to project (you can also add Visual Studio solution to project). Run project analysis and wait until it is done. You can see over-all stats form global summary window. This is the same window I used to read the LoC and the number of IL instructions metrics for my chart. Meanwhile I made some changes to my code (enabled advanced caching for events and event registrations module) and then I ran code analysis again to get results for this section of this posting. NDepend is also able to tell you exactly what parts of code have problematically much IL instructions. The code quality section of CQL Query Explorer shows you how much problems there are with members in analyzed code. If you click on the line Methods too big (NbILInstructions) you can see all the problematic members of classes in CQL Explorer shown in image on right. In my case if have 10 methods that are too big and two of them have horrible number of IL instructions – just take a look at first two methods in this TOP10. Also note the query box. NDepend has easy and SQL-like query language to query code analysis results. You can modify these queries if you like and also you can define your own ones if default set is not enough for you. What is good result? As you can see from query window then the number of IL instructions per member should have maximally 200 IL instructions. Of course, like always, the less instructions you have, the better performing code you have. I don’t mean here little differences but big ones. By example, take a look at my first method in warnings list. The number of IL instructions it has is huge. And believe me – this method looks awful. Conclusion The number of IL instructions is useful metric when optimizing your code. For analyzing code at general level to find out too long methods you can use the number of LoC metric because it is more intuitive for you and you can therefore handle the situation more easily. Also you can use NDepend as code metrics tool because it has a lot of metrics to offer.

  Read the article

• Defining .NET Components with Namespaces

  A .NET software component is a compiled set of classes that provide a programmable interface that is used by consumer applications for a service. As a component is no more than a logical grouping of classes, what then is the best way to define the boundaries of a component within the .NET framework? How should the classes inter-operate? Patrick Smacchia, the lead developer of NDepend, discusses the issues and comes up with a solution.

  Read the article

• List of blogs - year 2010

  - by hajan

  This is the last day of year 2010 and I would like to add links to all blogs I have posted in this year. First, I would like to mention that I started blogging in ASP.NET Community in May / June 2010 and have really enjoyed writing for my favorite technologies, such as: ASP.NET, jQuery/JavaScript, C#, LINQ, Web Services etc. I also had great feedback either through comments on my blogs or in Twitter, Facebook, LinkedIn where I met many new experts just as a result of my blog posts. Thanks to the interesting topics I have in my blog, I became DZone MVB. Here is the list of blogs I made in 2010 in my ASP.NET Community Weblog: (newest to oldest) Great library of ASP.NET videos – Pluralsight! NDepend – Code Query Language (CQL) NDepend tool – Why every developer working with Visual Studio.NET must try it! jQuery Templates in ASP.NET - Blogs Series jQuery Templates - XHTML Validation jQuery Templates with ASP.NET MVC jQuery Templates - {Supported Tags} jQuery Templates – tmpl(), template() and tmplItem() Introduction to jQuery Templates ViewBag dynamic in ASP.NET MVC 3 - RC 2 Today I had a presentation on "Deep Dive into jQuery Templates in ASP.NET" jQuery Data Linking in ASP.NET How do you prefer getting bundles of technologies?? Case-insensitive XPath query search on XML Document in ASP.NET jQuery UI Accordion in ASP.NET MVC - feed with data from database (Part 3) jQuery UI Accordion in ASP.NET WebForms - feed with data from database (Part 2) jQuery UI Accordion in ASP.NET – Client side implementation (Part 1) Using Images embedded in Project’s Assembly Macedonian Code Camp 2010 event has finished successfully Tips and Tricks: Deferred execution using LINQ Using System.Diagnostics.Stopwatch class to measure the elapsed time Speaking at Macedonian Code Camp 2010 URL Routing in ASP.NET 4.0 Web Forms Conflicts between ASP.NET AJAX UpdatePanels & jQuery functions Integration of jQuery DatePicker in ASP.NET Website – Localization (part 3) Why not to use HttpResponse.Close and HttpResponse.End Calculate Business Days using LINQ Get Distinct values of an Array using LINQ Using CodeRun browser-based IDE to create ASP.NET Web Applications Using params keyword – Methods with variable number of parameters Working with Code Snippets in VS.NET  Working with System.IO.Path static class Calculating GridView total using JavaScript/JQuery The new SortedSet<T> Collection in .NET 4.0 JavaScriptSerializer – Dictionary to JSON Serialization and Deserialization Integration of jQuery DatePicker in ASP.NET Website – JS Validation Script (part 2) Integration of jQuery DatePicker in ASP.NET Website (part 1) Transferring large data when using Web Services Forums dedicated to WebMatrix Microsoft WebMatrix – Short overview & installation Working with embedded resources in Project's assembly Debugging ASP.NET Web Services Save and Display YouTube Videos on ASP.NET Website Hello ASP.NET World... In addition, I would like to mention that I have big list of blog posts in CodeASP.NET Community (total 60 blogs) and the local MKDOT.NET Community (total 61 blogs). You may find most of my weblogs.asp.net/hajan blogs posted there too, but there you can find many others. In my blog on MKDOT.NET Community you can find most of my ASP.NET Weblog posts translated in Macedonian language, some of them posted in English and some other blogs that were posted only there. By reading my blogs, I hope you have learnt something new or at least have confirmed your knowledge. And also, if you haven't, I encourage you to start blogging and share your Microsoft Tech. thoughts with all of us... Sharing and spreading knowledge is definitely one of the noblest things which we can do in our life. "Give a man a fish and he will eat for a day. Teach a man to fish and he will eat for a lifetime" HAPPY NEW 2011 YEAR!!! Best Regards, Hajan

  Read the article

• CodePlex Daily Summary for Tuesday, October 25, 2011

  CodePlex Daily Summary for Tuesday, October 25, 2011Popular ReleasesScrum Task Board Card Creator: TaskCardCreator 2.5.0.0: What's New: UX improvement: Loading of work items is done in a worker thread Use memory, not the file system, when creating reports for better performance UI improvement: Better parent/child relation between the TeamProjectPicker and MainWindow Microsoft Visual Studio Scrum 1.0: Dedicated Impediment card added Supported Templates: Microsoft Visual Studio Scrum 1.0 Product Backlog Item, Task, Impediment, and Bug MSF for Agile Software Development v5.0 User Story, Task, and BugSubtitleTools: SubtitleTools 1.9: - Improved: Some DVD players need a mandatory UTF8-BOM (http://en.wikipedia.org/wiki/Byteordermark) at the beginning of the file to show RTL subtitles correctly.THE NVL Maker: The NVL Maker Ver 3.06: 3.06 ??? ??3.04，???CG MODE?? ??3.05—— ??????????????????????????????? ?????????config.tjs????????（??????????????????????????） ????config.tjs???，????????????，????????????Config.tjs。（???????，?????????，???KAGConfig??） ???????“????”??，??????????????????（Data） ??????????????????? ???????????，????????，??????????? ?fadeoutbgm?????????，???????????????，?????????? ????????，???“??????”??。（??????????macro_edu.ks??） ????????，????????A??????，???“??????”。 ?????????????，???????B??????，???“...Xomega Framework: Xomega.Framework 1.2: Release 1.2 of Xomega Framework refactors projects to allow generating assemblies for different target frameworks and profiles and allows deploying it as a NuGet package. It also includes some small fixes to the service and presentation layer classes.People's Note: People's Note 0.31: Added note tag editing. Changed note edit conflict resolution to keep the latest version. To install: copy the appropriate CAB file onto your WM device and run it.Windows Azure Toolkit for Windows Phone: Windows Azure Toolkit for Windows Phone v1.3.1: Upgraded Windows Azure projects to Windows Azure Tools for Microsoft Visual Studio 2010 1.5 – September 2011 Upgraded the tools tools to support the Windows Phone Developer Tools RTW Update SQL Azure only scenarios to use ASP.NET Universal Providers (through the System.Web.Providers v1.0.1 NuGet package) Changed Shared Access Signature service interface to support more operations Refactored Blobs API to have a similar interface and usage to that provided by the Windows Azure SDK Stor...xUnit.net Contrib: xunitcontrib-resharper 0.4.4 (dotCover): xunitcontrib release 0.4.4 (ReSharper runner) This release provides a test runner plugin for Resharper 6.0 RTM, targetting all versions of xUnit.net. (See the xUnit.net project to download xUnit.net itself.) This release addresses the following issues:Support for dotCover code coverage 4132 Note that this build work against ALL VERSIONS of xunit. The files are compiled against xunit.dll 1.8 - DO NOT REPLACE THIS FILE. Thanks to xunit's version independent runner system, this package can r...BookShop: BookShop: BookShop WP7 clientRibbon Editor for Microsoft Dynamics CRM 2011: Ribbon Editor (0.1.2122.266): Added CodePlex and PayPal links New icon Bug fix: can't connect to an IFD deployment when the discovery service url has been customizedDotNet.Framework.Common: DotNet.Framework.Common 4.0: ??????????，????????????XML Explorer: XML Explorer 4.0.5: Changes in 4.0.5: Added 'Copy Attribute XPath to Address Bar' feature. Added methods for decoding node text and value from Base64 encoded strings, and copying them to the clipboard. Added 'ChildNodeDefinitions' to the options, which allows for easier navigation of parent-child and ID-IDREF relationships. Discovery happens on-demand, as nodes are expanded and child nodes are added. Nodes can now have 'virtual' child nodes, defined by an xpath to select an identifier (usually relative to ...Media Companion: MC 3.419b Weekly: A couple of minor bug fixes, but the important fix in this release is to tackle the extremely long load times for users with large TV collections (issue #130). A note has been provided by developer Playos: "One final note, you will have to suffer one final long load and then it should be fixed... alternatively you can delete the TvCache.xml and rebuild your library... The fix was to include the file extension so it doesn't have to look for the video file (checking to see if a file exists is a...CODE Framework: 4.0.11021.0: This build adds a lot of our WPF components, including our MVVC and MVC components as well as a "Metro" and "Battleship" style.GridLibre para Visual FoxPro: GridLibre para Visual FoxPro v3.5: GridLibre Para Visual FoxPro: esta herramienta ayudara a los usuarios y programadores en los manejos de los datos, como Filtrar, multiseleccion y el autoformato a las columnas como la asignacion del controlsource.WiX Toolset: WiX v3.6 Beta: First beta release of WiX v3.6. The primary focus is on Burn but there are also many small bug fixes to the core toolset. For more information see: http://robmensching.com/blog/posts/2011/10/24/WiX-v3.6-Beta-releasedUmbraco CMS: Umbraco 5.0 CMS Alpha 3: Umbraco 5 Alpha 3Umbraco 5 (aka Jupiter) will be the next version of everyone's favourite, friendly ASP.NET CMS that already powers over 100,000 websites worldwide. Try out the Alpha of v5 today! If you're new to Umbraco and would like to get a low-down on our popular and easy-to-learn approach to content management, check out our intro video. What's Alpha 3?This is our third Alpha release. It's intended for developers looking to become familiar with the codebase & architecture, or for thos...Vkontakte WP: Vkontakte: source codeWay2Sms Applications for Android, Desktop/Laptop & Java enabled phones: Way2SMS Desktop App v2.0: 1. Fixed issue with sending messages due to changes to Way2Sms site 2. Updated the character limit to 160 from 140GART - Geo Augmented Reality Toolkit: 1.0.1: About Release 1.0.1 Release 1.0.1 is a service release that addresses several issues and improves performance. As always, check the Documentation tab for instructions on how to get started. If you don't have the Windows Phone SDK yet, grab it here. Breaking Change Please note: There is a breaking change in this release. As noted below, the WorldCalculationMode property of ARItem has been replaced by a user-definable function. ARItem is now automatically wired up with a function that perform...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.32: Fix for issue #16710 - string literals in "constant literal operations" which contain ASP.NET substitutions should not be considered "constant." Move the JS1284 error (Misplaced Function Declaration) so it only fires when in strict mode. I got a couple complaints that people didn't like that error popping up in their existing code when they could verify that the location of that function, although not strict JS, still functions as expected cross-browser.New ProjectsApiDiff.Net: API Difference/Reporting project written in C# using the wonderful Cecil engine (http://www.mono-project.com/Cecil) to show differences between versions of a public API. Something like the unsupported MS tool "libcheck"Aspect Oriented Programming with .Net: Demo project using PostSharp for AOP in .Net.CCBBAA: CCBBAACdf.Iris.MiniProjetCalculateur: Application Client / Serveur calculateur en langage CCmjSiverlight: a silverlight libraryCSharpKaartSpel: Super Kaart Spel.Developer Team Article System Management: Developer Team Article System Management Makes it easier for Authors to publish their articles . It developed in VB.NET .DirectoryMonitor: DirectoryMonitorDNN Administrador de Tareas: Un Proyecto de codigo abierto Domek: Taki sobie domekEDXGraphics: This is Edward(Shiqiu) Liu's personal code repository. Projects here are primarily about Graphics, AI and Algorithms. For more introduction, please visit [url:www.edxgraphics.com] Enterprise SSIS Framework: The Enterprise SSIS Framework is a project intended to simplify the management of an organization’s administration and ETL assets by abstracting the coordination and control flow into metadata. This project consists of the four parts: - Core SSIS Packages: A set of packages that are responsible for workflow within the framework - SQL Server 2008 DB: Holds all the metadata necessary to drive the application - Administration App: A web-based front end to facilitate managing assets running ...FIM Task Sequencer "RunJob": Runjob is a simple batch controller for FIM (MIIS and ILM) for starting and monitoring the execution of FIM Run Profiles that allows for complex (looping and branching) sequences to be put together with a simple XML 'task' file. Key features include: * Works with MIIS / ILM / FIM * Optionally Connects to the SQL database to verify that run profiles exist * Can execute arbitrary tasks via a command line. * Based on the results of command line or previous run history can loop and jump ...Ham Bone Soup amateur radio software and electronic log: Ham Bone Soup is a open source software written for satisfying the needs of Amateur Radio operators. The central feature is an especially flexible logging system for acommodating contests and general purpose logs, but will grow to include many other vital Amateur radio features. It doesn't do anything yet, we are just geting started.H? th?ng qu?n lý chi tiêu - windows phone: H? th?ng qu?n lý chi tiêu - windows phoneJavascript Editor for SharePoint: Javascript Editor for SharePoint is a lightweight, in-browser editor that lets you quickly prototype and test custom javascript code in SharePointLegoWeb: Open source Web CMS base on ASP.NET Webparts + MARCXML metadata: LegoWeb is an open source web content management solution developed base on combination of ASP.NET 2.0 Webparts and MARCXML Metadata. It is very simple and very flexible. LuaXna: An simple engine that allow to devolop in LUA for XNA. It have logging feature and cycles.Manager Game: Student project for game developement course. Using XNA 4.0 for Windows platform.Metroed: A Metro version of the PhoneyTools (a WP7 toolkit) for use with C#/VB WinRT applications.My Masters Sample Project for Sharepoint 2010: The feature stabling example project which is provide to deploy custom master page to personel sites on Sharepoint 2010 The solution is anwering fallowing questions : * How to deploy a custom master page ? * How to customize a masterpage ? * How to attach custom master page to personal sites using stabling feature ? NDepend TFS 2010 integration: NDepend TFS 2010 integration provides build activities, a build report customization addin, and extends the TFS Warehouse in order to leverage NDepend quality statistics for your projects. Open Source Renderer: Open Source RendererPearTunes: Peartunes is a university project.Plugin Framework Web: Lighweight plugin framework for web applicationsQTP TFS Generic Test Integration: In Microsoft Visual Studio 2010 there is a Generic Test type that allows you to integrate with automation tools like QTP. I have created a pretty simple solution that allows you to use your existing QTP automation scripts within the Microsoft Visual Studio testing framework and here's a sample below. The key part of this solution is transforming HP's QTP format to Microsoft’s Generic Test format so that you can publish the results to TFS. The added benefit of this integration is that you c...RequiemDream: the project for manage workflow records reexecute to helping developers for debugging.Rift Addon Studio 2010: Rift AddOn Studio (AOS) is an open source development environment designed to bring a Visual Studio-like experience to building Rift AddOns. For more information on exactly what AOS does, check out the list of features below. Small Database Tools: This is a project for me to create small tools I created for database related functions.SQL Azure Membership, Profile, Role provider starter kit for MVC3 project: When you use out of box MVC 3 site template the Membership, Profile and Role provider DB is created as attached MDF file by the name AspNetDB.mdf. This project has needed steps to easily migrate this DB into SQL Azure. This is a complete MVC3 Starter site project and could be used for your next 'Big Thing' as soon as properly setup. Enjoy :)SQL Server BareMetal Hands-on-Labs: The SQL Server BareMetal Hands-on-Labs project allows you to build a SQL Server Hands-on-Lab Enviroment from scratch, using Windows Server 2008 R2 SP1 Hyper-V. State Theater Website: Building a website designed to provide information about live theater throughout a state. Basically, it a port of NJTheater.com from classic ASP to Asp.Net making it customizable to any state along the way.Static web generator: Zoltar let you generate your website (blog, personl website,etc) from a set of md files. Ukulele Chord Finder: Ukulele Chord FinderUser Profile Cleaner: This application allows you to manage via GUI or command line user profiles, removed the profiles no longer used by a number of days. The application allows you to set a list of profiles that can be excluded from deletion. Virtual Visit: This project have made the virtual visite for your siteWP7 Open source project collection by eLite: ??Windows Phone????????zebrawebservice: ??AWB，??OPS??

  Read the article

1 2  | Next Page >