Search Results

Search found 503 results on 21 pages for 'vincent maverick durano'.

Page 1/21 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• setup L2TP on Ubuntu 10.10

  - by luca

  I'm following this guide to setup a VPS on my Ubuntu VPS: http://riobard.com/blog/2010-04-30-l2tp-over-ipsec-ubuntu/ My config files are setup as in that guide, openswan version is 2.6.26 I think.. It doesn't work, I can show you my auth.log (on the VPS): Feb 18 06:11:07 maverick pluto[6909]: packet from 93.36.127.12:500: received Vendor ID payload [RFC 3947] method set to=109 Feb 18 06:11:07 maverick pluto[6909]: packet from 93.36.127.12:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike] method set to=110 Feb 18 06:11:07 maverick pluto[6909]: packet from 93.36.127.12:500: ignoring unknown Vendor ID payload [8f8d83826d246b6fc7a8a6a428c11de8] Feb 18 06:11:07 maverick pluto[6909]: packet from 93.36.127.12:500: ignoring unknown Vendor ID payload [439b59f8ba676c4c7737ae22eab8f582] Feb 18 06:11:07 maverick pluto[6909]: packet from 93.36.127.12:500: ignoring unknown Vendor ID payload [4d1e0e136deafa34c4f3ea9f02ec7285] Feb 18 06:11:07 maverick pluto[6909]: packet from 93.36.127.12:500: ignoring unknown Vendor ID payload [80d0bb3def54565ee84645d4c85ce3ee] Feb 18 06:11:07 maverick pluto[6909]: packet from 93.36.127.12:500: ignoring unknown Vendor ID payload [9909b64eed937c6573de52ace952fa6b] Feb 18 06:11:07 maverick pluto[6909]: packet from 93.36.127.12:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 110 Feb 18 06:11:07 maverick pluto[6909]: packet from 93.36.127.12:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 110 Feb 18 06:11:07 maverick pluto[6909]: packet from 93.36.127.12:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02_n] meth=106, but already using method 110 Feb 18 06:11:07 maverick pluto[6909]: packet from 93.36.127.12:500: received Vendor ID payload [Dead Peer Detection] Feb 18 06:11:07 maverick pluto[6909]: "L2TP-PSK-NAT"[7] 93.36.127.12 #7: responding to Main Mode from unknown peer 93.36.127.12 Feb 18 06:11:07 maverick pluto[6909]: "L2TP-PSK-NAT"[7] 93.36.127.12 #7: transition from state STATE_MAIN_R0 to state STATE_MAIN_R1 Feb 18 06:11:07 maverick pluto[6909]: "L2TP-PSK-NAT"[7] 93.36.127.12 #7: STATE_MAIN_R1: sent MR1, expecting MI2 Feb 18 06:11:07 maverick pluto[6909]: "L2TP-PSK-NAT"[7] 93.36.127.12 #7: NAT-Traversal: Result using draft-ietf-ipsec-nat-t-ike (MacOS X): peer is NATed Feb 18 06:11:07 maverick pluto[6909]: "L2TP-PSK-NAT"[7] 93.36.127.12 #7: transition from state STATE_MAIN_R1 to state STATE_MAIN_R2 Feb 18 06:11:07 maverick pluto[6909]: "L2TP-PSK-NAT"[7] 93.36.127.12 #7: STATE_MAIN_R2: sent MR2, expecting MI3 Feb 18 06:11:07 maverick pluto[6909]: "L2TP-PSK-NAT"[7] 93.36.127.12 #7: Main mode peer ID is ID_IPV4_ADDR: '10.0.1.8' Feb 18 06:11:07 maverick pluto[6909]: "L2TP-PSK-NAT"[7] 93.36.127.12 #7: switched from "L2TP-PSK-NAT" to "L2TP-PSK-NAT" Feb 18 06:11:07 maverick pluto[6909]: "L2TP-PSK-NAT"[8] 93.36.127.12 #7: deleting connection "L2TP-PSK-NAT" instance with peer 93.36.127.12 {isakmp=#0/ipsec=#0} Feb 18 06:11:07 maverick pluto[6909]: "L2TP-PSK-NAT"[8] 93.36.127.12 #7: transition from state STATE_MAIN_R2 to state STATE_MAIN_R3 Feb 18 06:11:07 maverick pluto[6909]: "L2TP-PSK-NAT"[8] 93.36.127.12 #7: new NAT mapping for #7, was 93.36.127.12:500, now 93.36.127.12:36810 Feb 18 06:11:07 maverick pluto[6909]: "L2TP-PSK-NAT"[8] 93.36.127.12 #7: STATE_MAIN_R3: sent MR3, ISAKMP SA established {auth=OAKLEY_PRESHARED_KEY cipher=oakley_3des_cbc_192 prf=oakley_sha group=modp1024} Feb 18 06:11:07 maverick pluto[6909]: "L2TP-PSK-NAT"[8] 93.36.127.12 #7: ignoring informational payload, type IPSEC_INITIAL_CONTACT msgid=00000000 Feb 18 06:11:07 maverick pluto[6909]: "L2TP-PSK-NAT"[8] 93.36.127.12 #7: received and ignored informational message Feb 18 06:11:08 maverick pluto[6909]: "L2TP-PSK-NAT"[8] 93.36.127.12 #7: the peer proposed: 69.147.233.173/32:17/1701 -> 10.0.1.8/32:17/0 Feb 18 06:11:08 maverick pluto[6909]: "L2TP-PSK-NAT"[8] 93.36.127.12 #8: responding to Quick Mode proposal {msgid:183463cf} Feb 18 06:11:08 maverick pluto[6909]: "L2TP-PSK-NAT"[8] 93.36.127.12 #8: us: 69.147.233.173<69.147.233.173>[+S=C]:17/1701 Feb 18 06:11:08 maverick pluto[6909]: "L2TP-PSK-NAT"[8] 93.36.127.12 #8: them: 93.36.127.12[10.0.1.8,+S=C]:17/64111===10.0.1.8/32 Feb 18 06:11:08 maverick pluto[6909]: "L2TP-PSK-NAT"[8] 93.36.127.12 #8: transition from state STATE_QUICK_R0 to state STATE_QUICK_R1 Feb 18 06:11:08 maverick pluto[6909]: "L2TP-PSK-NAT"[8] 93.36.127.12 #8: STATE_QUICK_R1: sent QR1, inbound IPsec SA installed, expecting QI2 Feb 18 06:11:08 maverick pluto[6909]: "L2TP-PSK-NAT"[8] 93.36.127.12 #8: transition from state STATE_QUICK_R1 to state STATE_QUICK_R2 Feb 18 06:11:08 maverick pluto[6909]: "L2TP-PSK-NAT"[8] 93.36.127.12 #8: STATE_QUICK_R2: IPsec SA established transport mode {ESP=>0x0b1cf725 <0x0b719671 xfrm=AES_128-HMAC_SHA1 NATOA=none NATD=93.36.127.12:36810 DPD=none} Feb 18 06:11:28 maverick pluto[6909]: "L2TP-PSK-NAT"[8] 93.36.127.12 #7: received Delete SA(0x0b1cf725) payload: deleting IPSEC State #8 Feb 18 06:11:28 maverick pluto[6909]: "L2TP-PSK-NAT"[8] 93.36.127.12 #7: netlink recvfrom() of response to our XFRM_MSG_DELPOLICY message for policy eroute_connection delete was too long: 100 > 36 Feb 18 06:11:28 maverick pluto[6909]: "L2TP-PSK-NAT"[8] 93.36.127.12 #7: netlink recvfrom() of response to our XFRM_MSG_DELPOLICY message for policy [email protected] was too long: 168 > 36 Feb 18 06:11:28 maverick pluto[6909]: | raw_eroute result=0 Feb 18 06:11:28 maverick pluto[6909]: "L2TP-PSK-NAT"[8] 93.36.127.12 #7: received and ignored informational message Feb 18 06:11:28 maverick pluto[6909]: "L2TP-PSK-NAT"[8] 93.36.127.12 #7: received Delete SA payload: deleting ISAKMP State #7 Feb 18 06:11:28 maverick pluto[6909]: "L2TP-PSK-NAT"[8] 93.36.127.12: deleting connection "L2TP-PSK-NAT" instance with peer 93.36.127.12 {isakmp=#0/ipsec=#0} Feb 18 06:11:28 maverick pluto[6909]: packet from 93.36.127.12:36810: received and ignored informational message and my system log on OSX (from where I'm connecting): Feb 18 13:11:09 luca-ciorias-MacBook-Pro pppd[68656]: pppd 2.4.2 (Apple version 412.3) started by luca, uid 501 Feb 18 13:11:09 luca-ciorias-MacBook-Pro pppd[68656]: L2TP connecting to server '69.147.233.173' (69.147.233.173)... Feb 18 13:11:09 luca-ciorias-MacBook-Pro pppd[68656]: IPSec connection started Feb 18 13:11:09 luca-ciorias-MacBook-Pro racoon[68453]: Connecting. Feb 18 13:11:09 luca-ciorias-MacBook-Pro racoon[68453]: IKE Packet: transmit success. (Initiator, Main-Mode message 1). Feb 18 13:11:09 luca-ciorias-MacBook-Pro racoon[68453]: IKE Packet: receive success. (Initiator, Main-Mode message 2). Feb 18 13:11:09 luca-ciorias-MacBook-Pro racoon[68453]: IKE Packet: transmit success. (Initiator, Main-Mode message 3). Feb 18 13:11:09 luca-ciorias-MacBook-Pro racoon[68453]: IKE Packet: receive success. (Initiator, Main-Mode message 4). Feb 18 13:11:09 luca-ciorias-MacBook-Pro racoon[68453]: IKE Packet: transmit success. (Initiator, Main-Mode message 5). Feb 18 13:11:09 luca-ciorias-MacBook-Pro racoon[68453]: IKEv1 Phase1 AUTH: success. (Initiator, Main-Mode Message 6). Feb 18 13:11:09 luca-ciorias-MacBook-Pro racoon[68453]: IKE Packet: receive success. (Initiator, Main-Mode message 6). Feb 18 13:11:09 luca-ciorias-MacBook-Pro racoon[68453]: IKEv1 Phase1 Initiator: success. (Initiator, Main-Mode). Feb 18 13:11:09 luca-ciorias-MacBook-Pro racoon[68453]: IKE Packet: transmit success. (Information message). Feb 18 13:11:09 luca-ciorias-MacBook-Pro racoon[68453]: IKEv1 Information-Notice: transmit success. (ISAKMP-SA). Feb 18 13:11:10 luca-ciorias-MacBook-Pro racoon[68453]: IKE Packet: transmit success. (Initiator, Quick-Mode message 1). Feb 18 13:11:10 luca-ciorias-MacBook-Pro racoon[68453]: IKE Packet: receive success. (Initiator, Quick-Mode message 2). Feb 18 13:11:10 luca-ciorias-MacBook-Pro racoon[68453]: IKE Packet: transmit success. (Initiator, Quick-Mode message 3). Feb 18 13:11:10 luca-ciorias-MacBook-Pro racoon[68453]: IKEv1 Phase2 Initiator: success. (Initiator, Quick-Mode). Feb 18 13:11:10 luca-ciorias-MacBook-Pro racoon[68453]: Connected. Feb 18 13:11:10 luca-ciorias-MacBook-Pro pppd[68656]: IPSec connection established Feb 18 13:11:30 luca-ciorias-MacBook-Pro pppd[68656]: L2TP cannot connect to the server Feb 18 13:11:30 luca-ciorias-MacBook-Pro configd[20]: SCNCController: Disconnecting. (Connection tried to negotiate for, 22 seconds). Feb 18 13:11:30 luca-ciorias-MacBook-Pro racoon[68453]: IKE Packet: transmit success. (Information message). Feb 18 13:11:30 luca-ciorias-MacBook-Pro racoon[68453]: IKEv1 Information-Notice: transmit success. (Delete IPSEC-SA). Feb 18 13:11:30 luca-ciorias-MacBook-Pro racoon[68453]: IKE Packet: transmit success. (Information message). Feb 18 13:11:30 luca-ciorias-MacBook-Pro racoon[68453]: IKEv1 Information-Notice: transmit success. (Delete ISAKMP-SA). Feb 18 13:11:31 luca-ciorias-MacBook-Pro racoon[68453]: Disconnecting. (Connection was up for, 20.157953 seconds).

  Read the article

• Simple comme Ubuntu, à la découverte de Linux, de Vincent Lozano

  Nous avons le plaisir de vous présenter le livre Simple comme Ubuntu de Vincent Lozano à consulter ou à télécharger gratuitement. Citation: Ce livre est publié sous la licence libre CreativeCommons-BY-SA: BY : Paternité. Vous devez citer le nom de l'auteur original. SA : Partage des Conditions Initiales à l'Identique. Si vous modifiez, transformez ou adaptez cette création, vous n'avez le droit de distribuer la création qui en résulte que sous un contrat identique...

  Read the article

• Is Btrfs in Maverick considered stable?

  - by Hamish Downer

  I'm upgrading my laptop to Maverick (10.10) and I noticed btrfs is an option for the filesystem. I read a while ago that the Ubuntu team weren't sure if it was going to be stable for Maverick. Does anyone know (with references) if it was approved for stable use? Any other pros and cons? For the moment I've made my root partition ext4 and my home partition btrfs, but I could reinstall. My laptop is a secondary computer.

  Read the article

• Trois fondamentaux de JavaScript, par Jean-Pierre Vincent

  Après quelques années à écrire dans un langage, on finit facilement par oublier les premières difficultés que l'on avait rencontrées Nous allons explorer ici les trois notions fondamentales de JavaScript qui sont probablement les plus grosses sources de bogues, d'incompréhension et de frustration pour le développeur Web moyen. Et qui accessoirement sont la base d'une programmation plus évoluée par la suite.

  Read the article

• Dans le Cloud computing, un tutoriel pour débutant, traduit par Nicolas vieux et Vincent Viale

  Qu'est-ce que le Cloud computing ? Le Cloud computing est devenu le nouveau mot à la mode tirée en grande partie par le marketing et les offres de services de grands groupes comme Google, IBM et Amazon. Cloud computing est la prochaine étape dans l'évolution d'Internet. Cloud computing fournit le moyen par lequel tout - de la puissance de calcul de l'infrastructure informatique, des applications, des processus d'affaires pour une autoentreprise - peut être livré comme un service où et quand vous en avez besoin.

  Read the article

• Kinetic Scroll in Maverick

  - by Shoaib

  I have Sony VAIO FW 230J laptop. I was using Lucid and upgraded my system to Maverick beta in September 2010. Although there were few issues with beta release on my system although I did not felt myself in any deadlock. The most notable experience on my ubuntu was the smooth and kinetic scrolling and very sensitive touch pad experience with finer control that was oddly normal in previous releases and even on windows 7 currently. Definitely this release of ubuntu is improved for touch UI experience. I believe that this is magic of 10.10. For my official system I waited until the final release was out. After installing (upgrading) official system to Maverick I am not feeling the same smooth and kinetic scroll experience. My laptop has Graphics: Intel DMA-X4500MHD while my official desktop has Graphics: Intel DMA-X4500HD Do I need to install or update some software package to have similar kinetic scroll experience?

  Read the article

• Premières informations sur Ubuntu 10.10, "Maverick Meerkat" devrait être plus léger, plus rapide et

  Premières informations sur Ubuntu 10.10 « Maverick Meerkat » devrait être plus léger, plus rapide et très axé «social» Le prochain Ubuntu 10.10 s'appellera « Maverick Meerkat ». La distribution devrait par ailleurs sortir en octobre. Le créateur d'Ubuntu - et Pdg de Canonical, la société qui en soutient le développement - vient de dévoiler les premières informations et quelques axes de développement du projet. Mark Shuttleworth entend faire de cette version la « Perfect 10 ». En d'autres termes, continuer le mouvement vers un OS plus « léger » et plus rapide. Dans cette optique, une version officielle et spécialement conçue pour les netb...

  Read the article

• How to troubleshoot Ubuntu One in Maverick beta?

  - by greggory.hz

  I just updated to the Maverick beta (actually it's a fresh install, and not an upgrade of 10.04). But now "Ubuntu One" doesn't show up in my me-menu thing. In addition, when I go to Ubuntu One from System-Preferences and attempt to log in from there it will sometimes look like it works, but other times it won't do anything. When I go to the command line and type u1sdtool -s it will either say something like "doing auth dance" or "auth failed" and often it has never even prompted me to log in or try to get a new password (even though I know it's correct). Anyway, this is the main hangup I have with the Maverick beta. I can't get to my ubuntu one account from the native client. Is this a widespread issue? Is there something I can do to fix this?

  Read the article

• Could not calculate upgrade from Maverick Meerkat to Natty Narwhal

  - by xralf

  I upgraded from Ubuntu Lucid Lynx to Maverick Meerkat with the following commands: sudo apt-get update && sudo apt-get upgrade sudo apt-get install update-manager-core sudo vi /etc/update-manager/release-upgrades and changed the last line to Prompt=normal sudo do-release-upgrade -d This upgrade was OK. I decided to repeat the same steps and to upgrade Maverick Meerkat to Natty Narwhal. It ended with this message: Building data structures... Done Calculating the changes Calculating the changes Could not calculate the upgrade An unresolvable problem occurred while calculating the upgrade: Can not mark 'xubuntu-desktop' for upgrade This can be caused by: * Upgrading to a pre-release version of Ubuntu * Running the current pre-release version of Ubuntu * Unofficial software packages not provided by Ubuntu If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report. Restoring original system state Aborting Reading package lists... Done Building dependency tree Reading state information... Done Building data structures... Done === Command detached from window (Mon Nov 21 09:37:21 2011) === === Command terminated with exit status 1 (Mon Nov 21 09:37:21 2011) === How can I correct it?

  Read the article

• Ubuntu 10.10: The Maverick Meerkat Announced

  <b>Netstat -vat:</b> "What follows a Lucid Lynx? Why none other than a Maverick Meerkat. Well at least it does for Ubuntu Linux."

  Read the article

• Upgraded to Maverick; can't change theme

  - by Mike Doherty

  Hi, I just upgraded to Maverick, and now I can't change my theme except for the cursor and window border/decoration. I've just reinstalled the themes I want to use (Dust + Dust extra) successfully, and while the window border/decorations change properly when I select them, nothing else changes. The icon set doesn't change; gnome-panel doesn't change. I'm stuck on the fugly fallback theme - the one you see when you do gksudo gedit or something. Halp! -Mike

  Read the article

• Networking is disabled after installing Maverick

  - by Zifre

  I recently installed Ubuntu 10.10 (Maverick Meerkat). Everything was working fine. Then I just started up the computer again, and the networking doesn't work. The network manager applet says "Networking disabled". The button is disabled, so I can't enable it. This question seems to be basically the same issue I have. managed in was set to false, but changing it to true does not fix the problem. Is there any other way to fix this problem?

  Read the article

• Networking is disabled after installing Maverick

  - by Zifre

  I recently installed Ubuntu 10.10 (Maverick Meerkat). Everything was working fine. Then I just started up the computer again, and the networking doesn't work. The network manager applet says "Networking disabled". The button is disabled, so I can't enable it. This question seems to be basically the same issue I have. managed in was set to false, but changing it to true does not fix the problem. Is there any other way to fix this problem?

  Read the article

• Acer Revo (ION platform) + Maverick + 5.1 surround over HDMI

  - by Oli

  I've had a turbulent relationship with my media centre box. Every upgrade I perform on it seems to bring a brand new set of audio issues (the opposite of my desktop where things seem to get better and better). It's a Acer Revo 3600. That's basically an low-end Intel Atom chip with a Nvidia 9400M onboard. On paper that's perfect for something like a media centre. But having just upgraded to Maverick, the sound properties box only wants to offer me stereo sound over HDMI. The exact setup goes: Revo - Onkyo AV receiver - LG TV. The Onkyo box strips off the audio (supporting 7.1 -- though we're only using 6 speakers) and feeds the video onto the TV. I'd like to get to a point where Ubuntu thinks it's doing 5.1 over HDMI, upmixing stereo to 6ch and supporting DTS/AC3 (through Boxee). I've had this working before but it's frankly been a bit of a hacktastrophe. The audio chip is recognised as Nvidia MCP79/7A HDMI in alsamixer if that helps.

  Read the article

• Fan always spinning on Maverick

  - by jb

  I use Dell Studio 1555, after update to maverick my fan started spinning full speed allways. I use xserver-xorg-video-ati/radeon drivers because fglrx messes with my desktop resolution when connecting external screen. Processor is mostly idle. U use some desktop effects. On the same configuration on Lucid my fan worked slower. It eats lots of battery time :( Bug filed: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-ati/+bug/675156 Any insights how to solve/debug it or work around it?

  Read the article

• ALT+SysRq+REISUB hangs at "resetting" (without actually resetting/restarting) in Maverick

  - by Andrei

  I'm trying ALT+SysRq+REISUB to see how it would be used to restart my system safely in case of emergency. However, I find that ALT+SysRq+REISUB hangs at "resetting" (without actually resetting/restarting) in Maverick. All other SysRq combinations appear to work correctly (i.e. ALT+SysRq+REISU). cat /proc/sys/kernel/sysrq returns 0. But I'm not sure it's relevant because ALT+SysRq certainly works. What can I do to have "B" actually restart the system? Thanks!

  Read the article

• SysRq+REISUB hangs at "resetting" (without actually resetting/restarting) in Maverick

  - by Andrei

  I'm trying SysRq+REISUB to see how it would be used to restart my system safely in case of emergency. However, I find that SysRq+REISUB hangs at "resetting" (without actually resetting/restarting) in Maverick. All other SysRq combinations appear to work correctly (i.e. SysRq+REISU). cat /proc/sys/kernel/sysrq returns 0. But I'm not sure it's relevant because SysRq certainly works. What can I do to have "B" actually restart the system? Thanks!

  Read the article

• PIN request at each login after update to Maverick

  - by Giacomo Verticale

  I have a netbook with included 3G mobile broadband card (Huawei E620). I have configured the broadband network connection in the Network Manager and it works perfectly. However since Maverick upgrade, a window appears just after login I asking for the SIMcard PIN. This happens every time I log in and did not happen with Lucid. Note that the PIN is stored in the configuration of the mobile broadband connection and Lucid was satisfied with that. Is there a way to prevent this request or, at least, to have the system rember the PIN and stop ansking for it? If it may be useful, the broadband network connection is configured as not being available for other users. Also, I would like to keep the SIMcard asking for the PIN; only I do not want to insert it manually at login.

  Read the article

• Unbutu 10.10 (MAVERICK) live cd booting?

  - by D3c3nt Boy

  I am user of window and i had keen to shift on LINUX so i made live cd of UNBUTU 10.10 (MAVERICK) THIS IS MY VERY FIRST TIME TO USE UNBUTU I put cd in cd drive and set bios setup and unbutu cd worked and logo of unbutu appear on screen but suddenly before start up screen it shows this Busy Box v 1.5 (Unbutu 1: 1.15.31 unbutu5) built in shell (ash) enter help for a list of built in commands When i type help and press enter the list of commands appear like below alias break cd chdir command continue echo eval exec export filse getopts hash help let local printf pwd read readonly return set shift source test This is my first time so i have no idea what to do i restart my pc several but it happens every time plz help me. what should i do? Sorry for my

  Read the article

• How to install MBR with Maverick or Karmic

  - by Kilos

  I have been using Ubuntu since 9.10. Now Maverick crashed and my MBR is wrecked. I have run dd if=/dev/zero of=/dev/sdb bs=512 count=1 on advice from another Ubuntu user but now I can only install any Windows release and no Ubuntu. How do I completely erase the MBR and then use an Ubuntu live CD or another HDD with Ubuntu on to install a Linux-only MBR please. I am rather new at the technical side of Linux and have bandwidth shortage problems so I can't download large amounts of data. Thanks in advance!

  Read the article

• How To Upgrade Wine from 1.2 to 1.5 in Maverick 10.10

  - by Subhash

  I am using Maverick Meerkat (10.10). It has Wine 1.2. I followed the instructions at WinHQ for updating wine. In Synaptic Package Manager, the highest version I get now for upgrading is 1.3, not 1.5. How can I get upgrade to Wine 1.5? I do not want to upgrade the Ubuntu version. It seems that some of the supporting libraries such as lib6 are old. I would like to know how I can update them so as to make Wine 1.5 available.

  Read the article

• Cannot upgrade from Maverick

  - by Tideland

  When I attempt to upgrade the Update manager shows a warning message stating "Your ubuntu release is no longer supported." Okay... Click "close" it never goes away. Locks-up the update manager and game over. Next, try to update the software sources but can't do that either since it launches from the System Administer Software Sources and guess what? Needs sudo... But like all good linux software I'm sure the program is buried in a folder somewhere waiting for me to find it through the all powerful terminal program. Already commented out all Maverick Sources by hand but that didn't do the trick. Now what?

  Read the article

• VMware Player- no Maverick GUI after install

  - by Jason

  I'm experimenting with using both VMware Player and Virtualbox to run an Ubuntu VM in Win7. I have the VB install of Maverick working fine, and with only a few quirks such as slow response in Firefox scrolling and the occasional freeze, it works fine. However, making backup copies of a VB machine for storage is a PIA, and so I would like to see how Player works in the same situation. I created a new VM with 2GB RAM & 30GB hard drive space. The install went smoothly, but everytime I start the VM, no GUI shows and I have no mouse control. It brings me to a screen saying Ubuntu Easy Install: VMware Player is installing VMware Tools.. please wait. At this point, I get a login prompt and then goes to a standard CLI interface. At this point, I have no mouse control at all. The CPU and memory gauge that I have as a Win7 screenlet shows no changes and minimal HDD activity. The VMWare site says to install the Tools by a tarball, going to VMInstall VMware Tools, but I can't do that with no mouse control. Any solutions?

  Read the article

• Problems with Maverick upgrade

  - by altenuta

  I upgraded to Maverick 10.10 from Lucid. I have an old Toshiba Satellite with a 1.1 MHz and 256MB RAM. Initially I couldn't get my wireless to work. That solved itself after installing various updates and programs. The problems that remain are: I have to authorize at least 2 times at start-up. This machine is Ubuntu only. No boot load screen. I have a ton of programs and system directories that are in my home folder. Is this normal? It is difficult to wake the computer from sleep. Usually I just shut it down and restart. Tonight I waited and got a message about corrupt memory. The computer takes forever to do just about everything. Slow to start programs or doing things on the web. I am a longtime Mac user (since 1986). I also manage a network of several windoze machines. I am definitely a GUI guy and do very little in the terminal so I really need to know where to begin to get things straightened out. Can I rescue this machine without wiping it and doing a fresh install? This is basically a hobby machine. Aside from all the programs and upgrades I've installed, I have almost no files or documents to worry about saving. Anyone have any ideas about the problems I'm having and the best way to proceed? Thanks, Al

  Read the article

• debootstrap or virt-install Ubuntu Server Maverick fails

  - by poelinca

  Oki so running any kind of variation of debootsrap i get the following error I: Extracting zlib1g... W: Failure trying to run: chroot /lxc/iso/dodo mount -t proc proc /proc debootstrap.log : mount: permission denied if i manualy chroot into the directory then i get promted with: id: cannot find name for group ID 0 I have no name!@...# i tryed addgroup but it's not installed , apt-get/aptitude : command not found , so i can't do anything with it . I've tryed ubuntu-vm-builder but since it's calling debootstrap i get the same error . Played with it for a few days and then i stoped and gaved virt-install a try , everithing works till i get to the console to finish the install witch shows only : Escape character is ^] and nothing more , no matter what i type . So basicly what i'm trying to do is build a usable chroot system so i can use it with lxc or libvirt . What are my options to get containers/virtualisation up and running ? I've read somewhere that i can use openvz templates with lxc or libvirt ? but how ? Let me know if you need aditional info ( p.s. doing all this on a dedicated server so i can't access it by hand , only ssh , plus on my local pc running ubuntu desktop maverick everithing works ) . EDIT Getting closer , i managed to understand how to use an openvz template with lxc , now the problem comes with the network bridge lxc-start: invalid interface name: br0 # Use same bridge device used in your controlling host setup lxc-start: failed to process 'lxc.network.link = br0 # Use same bridge device used in your controlling host setup ' lxc-start: failed to read configuration file i followed the exact steps to create a bridge and lxc conf looks like: lxc.network.type = veth lxc.network.flags = up lxc.network.link = br0 # Use same bridge device used in your controlling host setup lxc.network.hwaddr = {a1:b2:c3:d4:e5:f6} # As appropiate (line only needed if you wish to dhcp later) lxc.network.ipv4 = {10.0.0.100} # (Use 0.0.0.0 if you wish to dhcp later) lxc.network.name = eth0 # could likely be whatever you want Since it's not working i know smth is wrong so could somebody guyde me ? EDIT , looks like the base install was using an custom kernel ( bzImage-2.6.34.6-xxxx-grs-ipv6-65 ) for witch you i didn't found the headers , i did a update-grub after i installed a new kernel , edited menu.lst and no it's using 2.6.35-23-server and now debootstrap is working just fine same as ubuntu-vm-builder .

  Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >