Search Results

Search found 924 results on 37 pages for '4kb sector'.

Page 10/37 | < Previous Page | 6 7 8 9 10 11 12 13 14 15 16 17  | Next Page >

• How to access files on a drive from an older system, mounted in a new system?

  - by David Thomas

  I've recently built a new system, after a rather large physical injury was sustained by my previous system (a precarious balance, and gravity, were not a happy mix). Surprisingly the /home drive of that system appears to have more-or-less survived the trauma. However... I decided to use a fresh drive for / (and swap) partition(s), and another fresh drive for the new /home. Now that's working, I decided to install the old /home drive (that I had assumed until now would be entirely dead and without capacity for use) into the new system to recover the files and data (so far as is possible). At this point I've run into a snag: I have no idea how to go about this (with Windows it was relatively easy, the new drive would be the latest character of the alphabet, and go from there). With 'disk utility' (System - Administration - Disk Utitlity) I've worked out which drive it is (/dev/sda) but clicking on 'mount' produces an error: 1: helper failed with: mount: according to mtab, /dev/sdb1 is already mounted on / mount failed ...if it is mounted on / I can't see it. I'm also moderately confused by the disk (device /dev/sda) being referred to as /dev/sdb1. Any and all insights would be incredibly welcome (I've already voted for: Idea #9063: New internal hard drives default automount at Brainstorm). Edited in response to Roland's request for a screenshot of disk utility: Details (so far as I know them): 40GB disk is / and swap, 1.0 TB Samsung is /home 1.0 TB Hitachi is from the old system (and was the old /home drive). Output from sudo fdisk -l pasted below: Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000bef00 Device Boot Start End Blocks Id System /dev/sda1 1 121601 976760001 83 Linux Disk /dev/sdb: 40.0 GB, 40018599936 bytes 255 heads, 63 sectors/track, 4865 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00037652 Device Boot Start End Blocks Id System /dev/sdb1 * 1 4742 38084608 83 Linux /dev/sdb2 4742 4866 993281 5 Extended /dev/sdb5 4742 4866 993280 82 Linux swap / Solaris Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000e8d46 Device Boot Start End Blocks Id System /dev/sdc1 1 121602 976760832 83 Linux

  Read the article

• external USB HD doesn't show up on 'sudo fdisk -l' on one Ubuntu, shows up on another (both 'precise')

  - by Menelaos

  I have a 1.5TB WD external USB HDD and two Ubuntu systems, both 'precise'. When I plug the disk on system A it doesn't show up on the output of sudo fdisk -l nor is it automatically mounted (note that that wasn't always the case - it used to appear in the past). When I plug it on system B (again Ubuntu precise) it shows up when I do a sudo fdisk -l (output appended at the end) and mounts automatically just fine. What does this discrepancy point to and what kind of diagnostics should I run / tools I should use to troubleshoot the problem? I followed the suggestion I received to do a sudo tail -f /var/log/syslog and the output is the following when I plug, unplug and replug the USB cable on System A: Sep 14 23:27:09 thorin mtp-probe: checking bus 2, device 3: "/sys/devices/pci0000:00/0000:00:13.2/usb2/2-2" Sep 14 23:27:09 thorin mtp-probe: bus: 2, device: 3 was not an MTP device Sep 14 23:28:01 thorin kernel: [ 338.994295] usb 2-2: USB disconnect, device number 3 Sep 14 23:28:04 thorin kernel: [ 341.808139] usb 2-2: new high-speed USB device number 4 using ehci_hcd Sep 14 23:28:04 thorin mtp-probe: checking bus 2, device 4: "/sys/devices/pci0000:00/0000:00:13.2/usb2/2-2" Sep 14 23:28:04 thorin mtp-probe: bus: 2, device: 4 was not an MTP device Sep 14 23:29:54 thorin AptDaemon: INFO: Quitting due to inactivity Sep 14 23:29:54 thorin AptDaemon: INFO: Quitting was requested (I guess the last two message are irrelevant). Output of sudo fdisk -l on System B $ sudo fdisk -l Disk /dev/sda: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders, total 2930277168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00070db4 Device Boot Start End Blocks Id System /dev/sda1 * 2048 2905114623 1452556288 83 Linux /dev/sda2 2905116670 2930276351 12579841 5 Extended /dev/sda5 2905116672 2930276351 12579840 82 Linux swap / Solaris Disk /dev/sdb: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x9c849c84 Device Boot Start End Blocks Id System /dev/sdb1 * 63 488375999 244187968+ 7 HPFS/NTFS/exFAT Disk /dev/sdg: 1500.3 GB, 1500299395072 bytes 255 heads, 63 sectors/track, 182401 cylinders, total 2930272256 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0003e17f Device Boot Start End Blocks Id System /dev/sdg1 2048 2930272255 1465135104 7 HPFS/NTFS/exFAT

  Read the article

• Oracle Enterprise Taxation and Policy Management Self Service v1.0 is Now Available

  - by user722699

  New tax product - Oracle Enterprise Taxation Policy Management Self Service is now available. The solution provides tax and revenue authorities with a single citizen portal – powered by Oracle Policy Automation for Public Sector, Oracle WebCenter, Oracle Application Development Framework and Oracle SOA Suite – that can integrate across multiple tax types and tax processing systems. Oracle Enterprise Taxation and Policy Management Self Service enables tax and revenue authorities to quickly provide more taxpayer services online – such as the ability to make payments, contact the tax agency with questions and requests or receive self-guided automated assistance with policies and tax law.  Tax and revenue authorities can implement Oracle Enterprise Taxation and Policy Management Self Service – an out-of-the-box solution – quickly and easily, and lower the cost of taxpayer service operations by promoting a broader set of taxpayer self service features.  Resources: ·         Datasheet: http://www.oracle.com/us/industries/public-sector/ent-taxation-policy-service-ds-1873518.pdf ·         Documentation: http://docs.oracle.com/cd/E38189_01/index.htm ·    

  Read the article

• Why don't I have the option ''Install Ubuntu alongside with them''

  - by almqgh

  Why dont I have this option? here are my disk sudo fdisk -l Disk /dev/sda: 640.1 GB, 640135028736 bytes 255 heads, 63 sectors/track, 77825 cylinders, total 1250263728 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x5b53cc54 Device Boot Start End Blocks Id System /dev/sda1 * 2048 409599 203776 7 HPFS/NTFS/exFAT /dev/sda2 409600 1153767021 576678711 7 HPFS/NTFS/exFAT /dev/sda3 1216962560 1250050047 16543744 7 HPFS/NTFS/exFAT /dev/sda4 1250050048 1250261679 105816 c W95 FAT32 (LBA) Disk /dev/sdb: 4005 MB, 4005527552 bytes 32 heads, 63 sectors/track, 3880 cylinders, total 7823296 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x20d8782d Device Boot Start End Blocks Id System /dev/sdb1 * 63 7822079 3911008+ c W95 FAT32 (LBA)

  Read the article

• Context is Everything

  - by Angus Graham

  Normal 0 false false false EN-CA X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} Context is Everything How many times have you have you asked a question only to hear an answer like “Well, it depends. What exactly are you trying to do?”.  There are times that raw information can’t tell us what we need to know without putting it in a larger context. Let's take a real world example.  If I'm a maintenance planner trying to figure out which assets should be replaced during my next maintenance window, I'm going to go to my Asset Management System.  I can get it to spit out a list of assets that have failed several times over the last year.  But what are these assets connected to?  Is there any safety consequences to shutting off this pipeline to do the work?  Is some other work that's planned going to conflict with replacing this asset?  Several of these questions can't be answered by simply spitting out a list of asset IDs.  The maintenance planner will have to reference a diagram of the plant to answer several of these questions. This is precisely the idea behind Augmented Business Visualization. An Augmented Business Visualization (ABV) solution is one where your structured data (enterprise application data) and your unstructured data (documents, contracts, floor plans, designs, etc.) come together to allow you to make better decisions.  Essentially we're showing your business data into its context. AutoVue allows you to create ABV solutions by integrating your enterprise application with AutoVue’s hotspot framework. Hotspots can be defined for your document. Users can click these hotspots to trigger actions in your enterprise app. Similarly, the enterprise app can highlight the hotspots in your document based on its business data, creating a visual dashboard of your business data in the context of your document. ABV is not new. We introduced the hotspot framework in AutoVue 20.1 with text hotspots. Any text in a PDF or 2D CAD drawing could be turned into a hotspot. In 20.2 we have enhanced this to include 2 new types of hotspots: 3D and regional hotspots. 3D hotspots allow you to turn 3D parts into hotspots. Hotspots can be defined based on the attributes of the part, so you can create hotspots based on part numbers, material, date of delivery, etc.  Regional hotspots allow an administrator to define rectangular regions on any PDF, image, or 2D CAD drawing. This is perfect for cases where the document you’re using either doesn’t have text in it (a JPG or TIFF for example) or if you want to define hotspots that don’t correspond to the text in the document. There are lots of possible uses for AutoVue hotspots.  A great demonstration of how our hotspot capabilities can help add context to enterprise data in the Energy sector can be found in the following AutoVue movies: Maintenance Planning in the Energy Sector - Watch it Now Capital Construction Project Management in the Energy Sector  -  Watch it Now Commissioning and Handover Process for the Energy Sector  -  Watch it Now

  Read the article

• Why won't Kubuntu load my CD?

  - by Visualblocks

  I'm running Kubuntu 12.04.1 LTS and Kubuntu hasn't recognised my CD! Here are the results of a sudo fdisk -l: Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x000c5a81 Device Boot Start End Blocks Id System /dev/sda1 * 2048 964603903 482300928 83 Linux /dev/sda2 964605950 976771071 6082561 5 Extended Partition 2 does not start on physical sector boundary. /dev/sda5 964605952 976771071 6082560 82 Linux swap / Solaris How am I meant to view it in say, Dolphin?

  Read the article

• Dual booting windows 8/ubuntu 12.04. Grub doesn't appear and machine never boot in ubuntu

  - by black sensei

  i got a new ACER predator AG3620-UR308 which came with windows 8, so i wanted to run ubuntu 12.04.2 on it as a dual booting. To be honest, i've been doing dual booting for a while now so, i did the right thing. the box came with 2TB HDD. so i made 4 partitions with a raw partition just after the windows installation partition I always do manual installation so even if ubuntu didn't detect windows 8, it was ok for me. So i created swap area and finished the installation etc....Grub was install on the only drive there which is sda. After reboot, grub doesn't even come up.So it always boot in windows 8. I did repeat the installation process twice and yield same result. which is weird because this method always works for me so far.Even the laptop am using to write this post is a dual booting windows 7/ mint nadia installed the same way. Is there anything new in windows 8 that i didn't make provision for? Before starting the installation, all i read about was that , windows 8 should be installed first and ubuntu after. I went ahead and disable secure boot from the BIOS and enabled CSM (don't even know what it means) according to Acer custhelp site . I boot from USB and did fdisk -l bellow is the result: ubuntu@ubuntu:~$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x8c361cb5 Device Boot Start End Blocks Id System /dev/sda1 1 3907029167 1953514583+ ee GPT Partition 1 does not start on physical sector boundary. Disk /dev/sdb: 8178 MB, 8178892800 bytes 255 heads, 63 sectors/track, 994 cylinders, total 15974400 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0006a87e Device Boot Start End Blocks Id System /dev/sdb1 * 2048 15972351 7985152 b W95 FAT32 ubuntu@ubuntu:~$ Can anybody shed some light? thank you in advance

  Read the article

• Dual booting windows 8/ubuntu 12.04.2, Grub doesn't appear and machine never boot in ubuntu

  - by black sensei

  i got a new ACER predator AG3620-UR308 which came with windows 8, so i wanted to run ubuntu 12.04.2 on it as a dual booting. To be honest, i've been doing dual booting for a while now so, i did the right thing. the box came with 2TB HDD. so i made 4 partitions with a raw partition just after the windows installation partition I always do manual installation so even if ubuntu didn't detect windows 8, it was ok for me. So i created swap area and finished the installation etc....Grub was install on the only drive there which is sda. After reboot, grub doesn't even come up.So it always boot in windows 8. I did repeat the installation process twice and yield same result. which is weird because this method always works for me so far.Even the laptop am using to write this post is a dual booting windows 7/ mint nadia installed the same way. Is there anything new in windows 8 that i didn't make provision for? Before starting the installation, all i read about was that , windows 8 should be installed first and ubuntu after. I went ahead and disable secure boot from the BIOS and enabled CSM (don't even know what it means) according to Acer custhelp site . I boot from USB and did fdisk -l bellow is the result: ubuntu@ubuntu:~$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x8c361cb5 Device Boot Start End Blocks Id System /dev/sda1 1 3907029167 1953514583+ ee GPT Partition 1 does not start on physical sector boundary. Disk /dev/sdb: 8178 MB, 8178892800 bytes 255 heads, 63 sectors/track, 994 cylinders, total 15974400 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0006a87e Device Boot Start End Blocks Id System /dev/sdb1 * 2048 15972351 7985152 b W95 FAT32 ubuntu@ubuntu:~$ Can anybody shed some light? thank you in advance EDIT Hey, i just did another trial with 13.04 this time and still no luck. bios: secure-boot: disabled enable CSM : always 1-delete previous ubuntu partition and swap area partition.now having free space 2- used usb installer to prepare usb with ubuntu-13.04-desktop-amd64.iso 3- rebooted : liveusb didnt detect windows 8, used something else 4-created partition ext4 for / 5-created partition for swap-area 6- default grub path is /dev/sda and clicked install Acer always boots into windows.

  Read the article

• Is it Possible to Repair Boot Record on Windows Vista Partition on Dual Boot Ubuntu 12.04.02 LTS Install?

  - by PasBonRJB

  I recently successfully installed Ubuntu 12.04.02 Desktop as a "side-by-side" on an eMachines ET1641-02w PC; which before had Windows Vista; but was no longer bootable, because the boot sector somehow got trashed. After I installed Ubuntu I can go to Devices/OS and I can access all of my docs, pics, videos, music, etc. on the Windows Vista partition; but I still can't "boot" the Windows partition. I've seen several posts regarding recovering boot sectors using the Boot-repair app; but am wondering if this "boot-repair" is only for the Ubuntu partition. Can I use "boot-repair" to repair the Windows Vista boot sector?

  Read the article

• Install Ubuntu 12.04 on Drive "D"?

  - by Bill Jones

  I have a Dell Inspiron 531S that originally came loaded with Windows Vista. A couple years ago I purchased a copy of Windows 7, formatted the hard drive and installed the updated operating system. In the process I formatted the 10 GB recovery drive partition on drive D as it was no longer needed for Windows Vista. I would really like to install Ubuntu 12.04 LTS alongside Windows 7 using the empty 10 GB drive D:. I have two questions. (1) Can Ubuntu be installed on a separate partition, a drive removed from the boot sector on drive C:? (2) If so would Grub be installed in the boot sector and properly select Windows 7 on drive C: or Ubuntu 12.04 on drive D?

  Read the article

• Ubiquity is not recognizing existing partition while trying to install Ubuntu alongside Windows 7

  - by Bertner

  So I'm using Ubuntu live CD to install Ubuntu next to Windows 7 but it doesn't recognize partitions. Here is sudo fdisk -l: Disk /dev/sda: 640.1 GB, 640135028736 bytes 255 heads, 63 sectors/track, 77825 cylinders, total 1250263728 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x0c7a859b Device Boot Start End Blocks Id System /dev/sda1 63 1250259631 625129784+ f W95 Ext'd (LBA) Partition 1 does not start on physical sector boundary. /dev/sda2 * 81920 4177919 2048000 b W95 FAT32 /dev/sda3 4177920 147535871 71678976 7 HPFS/NTFS/exFAT /dev/sda5 147538608 1147859631 500160512 7 HPFS/NTFS/exFAT I have one partition with Windows 7, one with its created partition (OS) and one for data.

  Read the article

• Enterprises Mobile Computing: the iPad?

  While Apple's iPad appears targeted at consumers, analysts say the iPad will earn a berth in the burgeoning enterprise mobile sector.

  Read the article

• Apple's iAd Debuts as iPad Sales Hit 450,000

  Not content to revolutionize the tablet market, Apple's iAd platform now targets the burgeoning online advertising sector.

  Read the article

• Ubuntu 12.04 USB (HP)

  - by xShadoWolf

  I have put ubuntu 12.04 on a USB (Kingston 8GB) and I go to install and I can't it gives options for erase and something else I have 4 primary partitions win7 for my main partition and 3 created by HP HP_TOOLS, HP_RECOVERY and SYSTEM To get to my point how do I install ubuntu on HDD I have a HP probook 200 notebook PC. Can I remove any partitions? When I do sudo fdisk -l This Comes Up Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x3ed7e7b0 Device Boot Start End Blocks Id System /dev/sda1 * 2048 409599 203776 7 HPFS/NTFS/exFAT /dev/sda2 409600 946591743 473091072 7 HPFS/NTFS/exFAT /dev/sda3 946591744 976560127 14984192 7 HPFS/NTFS/exFAT /dev/sda4 976560128 976771119 105496 c W95 FAT32 (LBA) Disk /dev/sdb: 7803 MB, 7803174912 bytes 122 heads, 58 sectors/track, 2153 cylinders, total 15240576 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc3072e18 Device Boot Start End Blocks Id System /dev/sdb1 * 8064 15240575 7616256 c W95 FAT32 (LBA)

  Read the article

• I want to increase the size of my boot partition (Ubuntu 14.04 version) [duplicate]

  - by Mike

  This question already has an answer here: How do I free up more space in /boot? 11 answers How to resize partitions? 5 answers I read in another post that kernels are distributed as new releases rather than upgrades. I didn't know this when I was allocating space to my partitions during my initial install of Ubuntu. As a result I ran out of space on my boot partition. Can I increase the size of it using GParted and how do I do this without doing damage to my system? 1 1049kB 512MB 511MB fat32 boot 2 512MB 768MB 256MB ext2 3 768MB 1000GB 999GB lvm Model: Linux device-mapper (linear) (dm) Disk /dev/mapper/ubuntu--vg-swap_1: 3712MB Sector size (logical/physical): 512B/4096B Partition Table: loop Number Start End Size File system Flags 1 0.00B 3712MB 3712MB linux-swap(v1) Model: Linux device-mapper (linear) (dm) Disk /dev/mapper/ubuntu--vg-root: 996GB Sector size (logical/physical): 512B/4096B Partition Table: loop Number Start End Size File system Flags 1 0.00B 996GB 996GB ext4 Sorry, don't know how to capture and post the terminal output screen.

  Read the article

• Smartphone Sales Soar

  Apple and Nokia grab market share in a sector that seems to have limitless horizons.

  Read the article

• No Windows Option on Boot

  - by Okoning

  I've installed Ubuntu alongside Windows but at first didn't have a boot option menu. So, I installed bootrepair and ran it. This succeeded in granting me a GRUB boot option menu, but Windows isn't on it. Here is the bootrepair report: http://paste.ubuntu.com/8098527 Can anyone tell me what might be wrong? EDIT: I ran sudo fdisk -l and this is the output: Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00023fe0 Device Boot Start End Blocks Id System /dev/sda1 * 2048 960096255 480047104 83 Linux /dev/sda2 960098302 976771071 8336385 5 Extended /dev/sda5 960098304 976771071 8336384 82 Linux swap / Solaris Disk /dev/sdb: 32.0 GB, 32015679488 bytes 255 heads, 63 sectors/track, 3892 cylinders, total 62530624 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 * 32 62530623 31265296 c W95 FAT32 (LBA)

  Read the article

• Grub cannot boot Windows 7 loader entry on 3tb drive

  - by twicejr

  It fails and it says 'cannot find device'. It will work again if I reinstall Windows, and use something like EasyBCD. But I'd like grub as a loader only, can someone help me out here? My system has a regular BIOS (p35-ds4 mainboard) so no UEFI support. Previously ran Windows 8 alongside ubuntu 13.04, now wanted windows 7 again with ubuntu 13.10. I am using disk /dev/sda. 3000.6 GB, 3000591900160 bytes 255 head, 63 sectors/track, 364801 cylinders, 5860531055 sectors Sector size (logical/fysical): 512 bytes / 4096 bytes Device Begin End Blocks ID System /dev/sda1 2048 419432447 209715200 83 Linux /dev/sda2 419432448 436013055 8290304 82 Linux swap /dev/sda3 436015102 1576339455 570162177 5 extended Partition 3 does not start on a fysical sector limit. /dev/sda4 * 1576339456 5860530175 2142095360 7 HPFS/NTFS/exFAT /dev/sda5 436015104 855443455 209714176 7 HPFS/NTFS/exFAT /dev/sda6 855445504 1576339455 360446976 7 HPFS/NTFS/exFAT

  Read the article

• Linux WD EARS Advanced Hard Drive Format

  <b>LinuxConfig:</b> "Nowadays hard drive manufactures are switching to a new hard drive technology which uses 4KB sectors size instead of conventional 512B. This new technology requires little tweaks to get a better performance in comparison to out-of-the-box settings."

  Read the article

• Bad Blocks Exist in Virtual Device PERC H700 Integrated

  - by neoX

  I have a DELL server with PERC H700 Integrated controller. I've made RAID5 with 12 harddrives and the virtual device is in Optimal state, but I receive such errors under linux: sd 0:2:0:0: [sda] Unhandled error code sd 0:2:0:0: [sda] Result: hostbyte=0x07 driverbyte=0x00 sd 0:2:0:0: [sda] CDB: cdb[0]=0x88: 88 00 00 00 00 07 22 50 bd 98 00 00 00 08 00 00 end_request: I/O error, dev sda, sector 30640487832 sd 0:2:0:0: [sda] Unhandled error code sd 0:2:0:0: [sda] Result: hostbyte=0x07 driverbyte=0x00 sd 0:2:0:0: [sda] CDB: cdb[0]=0x88: 88 00 00 00 00 07 22 50 bd 98 00 00 00 08 00 00 end_request: I/O error, dev sda, sector 30640487832 sd 0:2:0:0: [sda] Unhandled error code sd 0:2:0:0: [sda] Result: hostbyte=0x07 driverbyte=0x00 sd 0:2:0:0: [sda] CDB: cdb[0]=0x88: 88 00 00 00 00 07 22 50 bc e0 00 00 01 00 00 00 end_request: I/O error, dev sda, sector 30640487648 But all disk are in Firmware state: Online, Spun Up. Also there is not a single ATA read or write error in any disk in the raid (I check them with smartctl -a -d sat+megaraid,N -H /dev/sda). The only strange thing is in the output in megacli: megacli -LDInfo -L0 -a0 ... Bad Blocks Exist: Yes How could there be bad blocks in a Virtual Drive, which is in optimal state and no disk is broken or even with a single error? I tried "Consistency Check", but it finished successfully and the errors are still in dmesg. Could Someone help me to figure it out what is wrong with my raid?

  Read the article

• What causes "A disk read error occurred, Press Ctrl + Alt + Del to restart"?

  - by Mehrdad

  I have a virtual machine containing Windows XP SP3. When I resized the VHD file (and the embedded partition), and tried booting, I got: A disk read error occurred Press Ctrl + Alt + Del to restart Some notes: FixBoot and FixMBR don't help. ChkDsk doesn't help. The partition is indeed active. The partition starts at sector 63 (it also did so before the problem) of cylinder 1, head 1, and is marked as type 0x07 (NTFS) My host OS reads the VHD and the partition completely fine I'm interested in knowing the cause rather than the fix. So "re-format the disk", "reinstall Windows", etc. aren't valid solutions. It's a virtual machine after all... I have nothing to lose, so I don't care about fixing it. I just want to know what's causing this problem, in case I run into it again on a physical machine (which I have done before). More info: The layout of the original, dynamic VHD (which works correctly): +-----------------------------------------------------------------------------+ ¦ Disk: 3 MBR/GPT: MBR ¦ ¦ Size: 127.00GB CHS: 16578 255 63 ¦ ¦ Sectors: 266338304 Disk Signature: 0xEE3EEE3E ¦ ¦ Partitions: 1 Partition Order: 1 ¦ ¦ Media Type: Fixed Interface: SCSI ¦ ¦ Description: Msft Virtual Disk ¦ +-----------------------------------------------------------------------------¦ ¦Pos Idx Type/Name Size Boot Hide Start Sector Total Sectors DL Vol Label ¦ +--- --- --------- ---- ---- ---- -------------- -------------- -- -----------¦ ¦ 1 1 07-NTFS 1.5G Yes No 63 3,148,677 F: <None> ¦ +-----------------------------------------------------------------------------+ The layout of the resized, fixed-size VHD (which doesn't work): +-----------------------------------------------------------------------------+ ¦ Disk: 3 MBR/GPT: MBR ¦ ¦ Size: 1.50GB CHS: 196 255 63 ¦ ¦ Sectors: 3149824 Disk Signature: 0xEE3EEE3E ¦ ¦ Partitions: 1 Partition Order: 1 ¦ ¦ Media Type: Fixed Interface: SCSI ¦ ¦ Description: Msft Virtual Disk ¦ +-----------------------------------------------------------------------------¦ ¦Pos Idx Type/Name Size Boot Hide Start Sector Total Sectors DL Vol Label ¦ +--- --- --------- ---- ---- ---- -------------- -------------- -- -----------¦ ¦ 1 1 07-NTFS 1.5G Yes No 63 3,148,677 F: <None> ¦ +-----------------------------------------------------------------------------+

  Read the article

• Creating RAID1 on Windows Server causes not enough disk space error

  - by northpole

  I have three disks. Disk0 (boot), Disk1 and Disk2. Disk 1 and 2 are both unformatted and unallocated drives. I am trying to mirror Disk0 to Disk1. They are both Dynamic and are both the same size (1TB). When I select Disk1 to be the mirror I get the error "There is not enough space available on the disk(s) to complete this operation". I have spent several hours searching for a solution but have not found one. Why do I get this error when they are both the same size? EDIT: Shrinking the volume size on the boot disk by 100MB allowed me to get past this error. From what I read the mirror drive needs to be the same size or larger than the boot drive. So I am confused why that change worked. However, I now get the error " all disks holding extents for a given volume must have the same sector size and the sector size must be valid". I believe this is because the drives are different and one has 512B and the other is the Advanced Drive that is 4KB. What the different sector sizes cause both problems? If I got the same disks would both issues go away?

  Read the article

• Bad sectors, S.M.A.R.T., SpinRite, firmware on platter and drive id questions.

  - by Christopher Galpin

  Is it possible for S.M.A.R.T. to give false readings (say I was fiddling with lots of recovery programs, transfers, so on and so forth) or is it absolutely a read-only direct correlation to the physical status of a drive? Does SpinRite level 5 "recover bad sectors" operate on those marked at the factory? Are they on the same level as your generic bad sector, with SpinRite thus having full access? (Also I'm curious if SMART's bad sector count is zero'd afterward or if it includes factory marked sectors.) The main firmware of some drives, like a WD Passport is stored on the platter. How is it protected? Is it through marking them as bad sectors? If so, I'm wondering if SpinRite's sector recovery could bring about firmware corruption on these drives. Is the failure of a drive to report valid identity information (hdparm -I /dev/xx) consistent with corrupted firmware, or just general disk failure? I may be misunderstanding the role of firmware here. I feel I've read a drive's identity information is on the platter, just like the partition tables and so on. Is this true? (Apologizes if this is more appropriate for SuperUser.)

  Read the article

• Ubuntu 13.04 to 13.10: Filesystem check or mount failed [migrated]

  - by SamHuckaby

  I attempted to upgrade from Ubuntu 13.04 to 13.10 today, and mid upgrade the system started flaking out, and eventually locked up entirely. I was forced to restart the computer, and am now unable to get the computer to boot up at all. When I boot currently, it takes me to the GRUB menu, and I can choose to boot normally, or boot in an older version. I have tried several things, which I list below, but no matter what, when I try to finish booting into Ubuntu, I receive the following error: Filesystem check or mount failed. A maintenance shell will now be started. CONTROL-D will terminate this shell and continue booting after re-trying filesystems. Any further errors will be ignored root@ubuntu-computername:~# I have fun fsck -f and everything appears correct, no errors are reported. and it passes all 5 checks. If I run fdisk -l then I get the following information: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 4096 bytes / 4096 bytes Disk identifier: 0x00010824 Device Boot Start End Blocks Id System /dev/sda1 * 2048 608456703 304227328 83 Linux /dev/sda2 608458750 625141759 8341505 5 Extended Partition 2 does not start on physical sector boundary. /dev/sda5 608458752 625141759 8341504 82 Linux swap / Solaris Disk /dev/sdb: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x0fb4b7e8 Device Boot Start End Blocks Id System /dev/sdb1 8192 625139711 312565760 7 HPFS/NTFS/exFAT I am considering just installing a new OS on the other disk, that currently has nothing on it, and then just attempting to scrape my data off the old disk (thankfully I didn't encrypt the files). Really my question is this: Can I salvage this Ubuntu install, or should I give up and just reinstall?

  Read the article

• Re-sizing disk partition linux/vm

  - by Tiffany Walker

  I VM Player running a linux guest and I was wanting to know how do I expand the disk? In the VM player I gave more disk space but I am not sure how to mount/expand/connect the new disk space to the system. My old disk space was 14GB [root@localhost ~]# df -h / Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup-lv_root 14G 4.5G 8.2G 36% / Then I expanded it and now I see sda2 which is the new space? [root@localhost ~]# fdisk -l Disk /dev/sda: 128.8 GB, 128849018880 bytes 255 heads, 63 sectors/track, 15665 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000cd44d Device Boot Start End Blocks Id System /dev/sda1 * 1 64 512000 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 64 2611 20458496 8e Linux LVM Disk /dev/mapper/VolGroup-lv_root: 14.5 GB, 14537457664 bytes 255 heads, 63 sectors/track, 1767 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/VolGroup-lv_swap: 6408 MB, 6408896512 bytes 255 heads, 63 sectors/track, 779 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Do I need to mount the new space first? resize2fs -p /dev/mapper/VolGroup-lv_root 108849018880 resize2fs 1.41.12 (17-May-2010) The containing partition (or device) is only 3549184 (4k) blocks. You requested a new size of 1474836480 blocks. resize2fs -p /dev/mapper/VolGroup-lv_root 128849018880 resize2fs 1.41.12 (17-May-2010) resize2fs: Invalid new size: 128849018880 [root@localhost ~]# lvextend -L+90GB /dev/mapper/VolGroup-lv_root Extending logical volume lv_root to 103.54 GiB Insufficient free space: 23040 extents needed, but only 0 available [root@localhost ~]# lvextend -L90GB /dev/mapper/VolGroup-lv_root Extending logical volume lv_root to 90.00 GiB Insufficient free space: 19574 extents needed, but only 0 available EDIT: So after trying pvcreate/vgextend nothing has so far worked. I'm guessing the new disk space added from VM Player is not showing up? pvscan PV /dev/sda2 VG VolGroup lvm2 [19.51 GiB / 0 free] Total: 1 [19.51 GiB] / in use: 1 [19.51 GiB] / in no VG: 0 [0 ]

  Read the article

< Previous Page | 6 7 8 9 10 11 12 13 14 15 16 17  | Next Page >