Search Results

Search found 2154 results on 87 pages for 'bios'.

Page 10/87 | < Previous Page | 6 7 8 9 10 11 12 13 14 15 16 17  | Next Page >

• Error starting Hyper-V VM

  - by Peter Bernier

  I'm trying to start a VM on a new Hyper-V installation and I'm receiving the following error: The virtual machine could not be started because the hypervisor is not running. The following actions may help you resolve the problem: 1) Verify that the processor of the physical computer has a supported version of hardware-assisted virtualization. 2) Verify that hardware-assisted virtualization and hardware-assisted data execution protection are enabled in the BIOS of the physical computer. (If you edit the BIOS to enable either setting, you must turn off the power to the physical computer and then turn it back on. Resetting the physical computer is not sufficient.) 3) If you have made changes to the Boot Configuration Data store, review these changes to ensure that the hypervisor is configured to launch automatically. My machine supports virtualization at the hardware level and it is enabled in BIOS. Why am I receiving this error?

  Read the article

• Best practice on Linux servers and CPU/power throttling?

  - by Valentin

  I am running a couple of Debian 6 (2.6.32) and 7 (3.2) Linux servers and all of them have energy saving settings enabled in their BIOS. Furthermore Linux shows that the CPUs are throttled if the servers are idling. I wonder if this could cause any harm - could there be e.g. performance impacts because Linux would not be able to handle throttling correctly? Is there a best practice for Linux servers and power/CPU throttling? Do you guys switch your energy profiles to "performance" or do you leave both the BIOS and the OS with their default settings? The reason I am asking is that I encountered several performance issues on physical Dell servers although all values (CPU/load, memory, I/O, network etc.) seemed to be normal. After changing the BIOS power settings to "performance" in those specific cases, I was able to get rid of the performance issues.

  Read the article

• Shuttle FB51 mobo does not boot with external USB drive attached [closed]

  - by user127236

  I am repurposing an old Alienware desktop as a home media server. The PC is based on the Shuttle FB51 motherboard. The BIOS is a Phoenix Version 6.00 PG, release date 12/16/2002. I have loaded Ubuntu 12.04 LTS on the internal hard drive. I am using a Western Digital WD Elements 1.5 TB USB 2.0 Desktop External Hard Drive for media storage. When the external drive is plugged in and the PC is powered on, it freezes very early in the BIOS self-test, even before it begins the memory test. If I unplug the drive, the self-test proceeds without further problems. I can plug the USB drive back in when the self-test is complete, and Ubuntu will boot and find the external drive normally. I've tried several changes to the BIOS setup without finding a cure for the boot issue. Any assistance gratefully accepted. JGB

  Read the article

• BIOS setting: AHCI or RAID (when using SSD + 2x HDD in RAID-0)

  - by nixdagibts

  Hello there, I want to add a new SSD and use it as system drive with Win7 x64 installed. As driver I chose newest Intel Rapid Storage driver (not MSAHCI). I know that I have to use AHCI as BIOS setting for optimal SSD read/write performance. But I'm also using 2 normal HDDs as separate RAID-0 SSD: Win7 HDD: RAID-0 HDD: RAID-0 If I set my BIOS on my ASUS P5W DH Deluxe to AHCI, my RAID-0 cant be recognized And If im using RAID as setting, maybe my SSD has not its top speed. But I'm not sure about that. In short: AHCI no RAID-0 RAID no optimal SSD performance (?) Now my question: Can I use RAID as BIOS setting and be sure, that theres no decrease in SSD performance? Google finds so many articles with similar topics and my head is just exploding. Two examples: - set AHCI and after installing OS switch to RAID as BIOS setting... what? - use a diskette and F6 while installing win7... really? O.o I thought those times are gone

  Read the article

• How can I switch memory modules to 1600 Mhz?

  - by Salvador

  Some months ago I bought 4 Memory modules of 4GB DDR3 1600 KINGSTON HYPERX. The official Kingston manual says: *This module has been tested to run at DDR3-1600 at a low latency timing of 9-9-9-27 at 1.65V.The SPD is programmed to JEDEC standard latency DDR3-1333 timing of 9-9-9. I cannot find which is the real speed of my memory modules. I normally get from several tools that the real speed is 1333 Mhz srs@ubuntu:~$ sudo dmidecode -t memory # dmidecode 2.9 SMBIOS 2.6 present. Handle 0x005D, DMI type 16, 15 bytes Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 32 GB Error Information Handle: 0x005F Number Of Devices: 4 Handle 0x005C, DMI type 17, 28 bytes Memory Device Array Handle: 0x005D Error Information Handle: 0x0060 Total Width: 64 bits Data Width: 64 bits Size: 4096 MB Form Factor: DIMM Set: None Locator: ChannelA-DIMM0 Bank Locator: BANK 0 Type: <OUT OF SPEC> Type Detail: Synchronous Speed: 1333 MHz (0.8 ns) Manufacturer: Kingston Serial Number: 07288F23 Asset Tag: 9876543210 Part Number: 9905403-439.A00LF How can I switch memory modules to 1600 Mhz?

  Read the article

• How can I boot into Windows from GRUB rescue WITHOUT CD drive?

  - by user103968

  I took this from another website's string where i found no good answer This is my situation: installed Ubuntu without a CD (using A USB) dual boot installation (Windows 7+Ubuntu) didn't like the installation and decided to boot into Windows and delete the Linux partitions forgot to fix the mbr from within Windows Now, when I boot, I am stuck in the GRUB rescue limbo. Simple question: How can I boot into Windows from GRUB rescue? I cannot boot from CD because I don't have a CD drive, therefore the usual solutions (recovery CD etc) do not work. Any hints? Is there a way i can maybe do this through a USB? Thanks

  Read the article

• System doesn't boot when ubuntu is installed on an SSD

  - by Caetano Nichnich Nunes

  I've recently discovered Ubuntu and decided to give it a try. I am using a Samsung Series 5 p530u3c-ad1 which comes with a 24gb SSD and a ~500gb HDD, My intention is to set the system files to the ssd and the rest to the HDD. The system works fine if I do a direct install using only the HDD, but if I try using the SSD for the system files the computer doesn't boot-up, I do not know if the SSD is being recognized by the computer, I think so because I could install Ubuntu on it, but it doesn't appear on the boot order or the boot menu. I read some posts and tried using boot-repair which pointed me not to forget to set my system to boot from my SSD, unfortunately I cannot because of the issues mentioned above. Thanks for your time.

  Read the article

• Uninstalling ubuntu and installing windows [duplicate]

  - by user286430

  This question already has an answer here: How to remove Ubuntu and put Windows back on? 13 answers Recently built a computer and installed ubuntu 14.04 from USB. I struggle with using the interface, programs and terminal so I plan to put windows 7 ultimate iso onto a USB while in ubuntu. Then remove ubuntu and install windows 7. How do I go about doing this and what programs do I use?

  Read the article

• Unable to make my bios see my sata hdd

  - by Stefan

  I know there are many question about that, but I tried everything and I'm still not able to make my bios see my sata2 hdd. I've got a QDI motherbord with no sata port; only 2 ide ports. I had an old ide hdd, now i've removed it and bought a sata2 hdd. Since my pc has no sata slots i bouth a ide-to-sata adapter. So, i don't have any os installed on the new drive, and the old drive is removed. My problem is that I'm unable to see my hdd on bios. I suppose that my bios, since it's an old version, doesn't have sata drivers, but I don't know if I must install it and also I dont know how to do it. Anyone can help me?

  Read the article

• Fresh XP Install: PS2 Keyboard not working

  - by RedLeader

  I reformatted a drive to NTFS (not quick) and installed Windows XP on it. Now it's trying to do the graphical portion of the setup, wanting me to click Accepts and Nexts... but I can't! The keyboard works to get to the BIOS and in the BIOS. I have reset the CMOS many times, tried fail-safe and optimized defaults, and even enabled USB Keyboard and mouse support (even though the I have no USB devices plugged in).

  Read the article

• Intel Matrix Storage Manager not showing on Asus P5W DH Deluxe?

  - by Leon

  I have set, under "Main" - "IDE Configuration" - "Configure SATA as" to "Raid" and "Onboard Serial-ATA BootRom" to "Enabled", but upon POST I still do not see the Intel Matrix Storage Manager screen where I can press Ctrl+I to set up my raid? I have the latest BIOS version EDIT: Although I had set the rom to "enabled", I then went and reset the bios settings to default. I then set the bootrom setting to "disabled", restarted and then "enabled" again and it seemed to work.

  Read the article

• Is possible to boot on PXE over a WiFi device?

  - by Diogo Rocha

  As I know it is possible to boot up some bootable images (like Linux, Clonezilla, management applications and others) over a PXE (Preboot Execution Environment) server with an Ethernet device (802.3). Can the same thing be done with an Ethernet WiFi (802.11) device? I tested with my notebook but my BIOS appears to not enable booting from WiFi devices. Is it possible with some specific WiFi cards and/or a specific BIOS?

  Read the article

• Optiplex can't find SATA III Controller

  - by Joel Rodgers

  I just purchased a HighPoint Rocket 620 Storage controller- Serial ATA-600- 600 MBps (OEM version) and a OWC SSD: For some reason, my Dell Optiplex 755 bios sees this card as a storage device installed in the x1 PCI Express slot, but I can't get it to boot from it. In fact, I don't even see the boot screen as mentioned by the manual. Any help would be greatly appreciated. FYI, I tried every imaginable BIOS setting, including using legacy mode instead of AHCI.

  Read the article

• install windows from cd

  - by doug

  hi there I have an friends acer laptop but i don't have access to the bios, and I cannot boot from CD-ROM. Bios is password protected, my friend doesn't remember the password, and I'm too lazy to open and reset it. I have to install windows XP. What can I do? ty

  Read the article

• My Asus K40IN hangs after a ram upgrade was installed, how do I fix this?

  - by el

  From a 2GB RAM I upgraded the K40IN and added another ram to make it into 4GB. what happens is it hangs a lot. Especially right when I boot/startup the laptop. Would updating the resolve this problem, if it does how do I update the bios? And where can I get the BIOS for the update?

  Read the article

• BIOS says 8GB RAM installed but only 6GB is available

  - by Hiroshi

  my machine is a Dell Studio XPS 9100 with 8GB of RAM installed. When I open the BIOS setup and enter the System Info, it shows that my machine got 8GB of RAM installed but only 6GB is available (yes this is from the BIOS only). In Windows 7 (64bit Pro) it shows only 6GB of RAM are available. But if I run CPU-Z then it can detect all 8GB RAM. The machine came pre-configured and I have never opened the case before.

  Read the article

• Burn bootable iso image to USB stick using dd: Won't boot (despite USB first in boot sequence)

  - by Nicolas Raoul

  I have installed Ubuntu on a Lenovo Thinkpad R500 2732, and I must update the BIOS. On the Lenovo website, I am offered this: BIOS Update Bootable CD for Windows 7 (32-bit, 64-bit), Vista (32-bit, 64-bit), XP - ThinkPad R500 I guess a bootable CD that would do a BIOS update is indeed what I need. (still wondering why it says "Windows" though... if it is bootable should not it be OS-agnostic?) Not wanting to waste a CD, I copied the image to my USB stick: sudo dd if=/home/nico/7yuj40uc.iso of=/dev/sdb1 bs=1M And rebooted, after making sure USB is first in the boot sequence. PROBLEM: It does not boot. Did I forget one step? Details about the iso image (readme): ls -lh 7yuj40uc.iso 25M file 7yuj40uc.iso /home/nico/7yuj40uc.iso: # ISO 9660 CD-ROM filesystem data '7YUJ40US ' (bootable) (Scroll to the right: it says "bootable") UNetbootin does not work because it is not a Linux image. Some people on the Internet advise to copy the content of the ISO and do other steps. This ISO has zero ISO content so it would not work. If I mount the ISO, I can see it contains zero files.

  Read the article

• No discs found when trying to install Windows 8 with UEFI

  - by Sahas Katta

  I have a Vizio Notebook (CN15-A5). It came pre-installed with Windows 8 x64 and is taking advantage of UEFI out of the box. The BIOS (APTOS AMI) is in Secure Boot mode with the OS selected as "Windows 8". I removed the stock HDD that came with the machine and put my own SSD into it. I created a Windows 8 Pro x64 installation disc on a 4GB USB flash drive formated as FAT32 since its apparently required for UEFI. When I boot from the USB Win8 installation disc, I get suck when I reach the "Custom: Install Windows only" section. Normally you would see a list of available discs and their partitions, however my entire list is blank. If I head back to the BIOS and disable Secure Boot and set the OS to "Other OS" and attempt again, I am able to see the list of available discs in the system and can install a copy of Windows 8. Unfortunately, doing it in this method results in an installation with a traditional 350 MB partition + OS partition instead of 4 partitions which is normal for a UEFI setup. Has anyone run into this problem? I've tried loading defaults in the BIOS and attempting to install via every combination with no luck. Any help would be appreciated.

  Read the article

• Dell Dimension 8400 Startup error

  - by Michael

  Hello all, thanks first for taking the time to read this and possibly help me...... now I am pretty decent of a computer tech...but not enough. I am having an issue with my computer which is running windows xp and as I mentioned it is a dell Dimension 8400. as soon as I power the system up the fan goes into hyper drive (spins like crazy and is very loud) then the start up screen with dell comes up and the loading bar gets stuck on the process of "Bios Revision A00" and never loads beyound that. I have read alot about it and think that the main problem was that it can not locate the file (which does have an updated version) I think it is A09. I can not enter safe mode, Bios mode or anything. I do have the file on my other computer and I was wondering if there is a way that I can use a usb flash drive (as I have read on other sites) to create a bootable MS-Dos diskette but I am failing at creating as such....is this possible? or is there anything else I can do? I tried to remove the battery from the system for about 10 minutes while it was completely unplug and tried then to reboot it and go into the bios menu but the same thing keeps happening....can anyone help me :-(

  Read the article

• What are these CPU cache settings? Snoop Filter, ACL prefetch, HW prefetch

  - by eater

  I was in my BIOS setup turning on VT-x support today and saw these other settings. A little googling indicates that they each seem to turn on some sort of optimization to do with the CPU's L2 cache. They were all turned off by default. The processor in question is an Intel Xeon quad-core 3.4GHz (X5492). My OS is Linux 2.6.35.10-74.fc14.x86_64 #1 SMP Thu Dec 23 16:04:50 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux. I have 4GB of RAM if that matters. Here's what the BIOS manufacturer has to say: Snoop Filter Enabling the snoop filter typically improves performance by reducing snoop traffic on the frontside bus in dual processor configurations. Well I like the sound of improved performance. Why would the BIOS have this off by default? Or by dual processor do they not mean multi-core? Regardless, is there a downside if this is on? ACL Prefetch When enabled, the Adjacent Cache Line Prefetcher fetches both cache lines that comprise a cache line pair when it determines required data is not currently in its cache. When disabled, the processor will only fetch the cache line required by the processor. HW Prefetch Fetches an extra line of data into L2 from external memory. Both of these sound like optimizations that have some drawbacks. What are the reasons to turn them on? What are the reasons to leave them off. Why is the default off?

  Read the article

• Booting an Asus EeePC from a LiveCD USB stick

  - by Bryan

  I have two identical Asus EeePC netbooks that are both installed with Ubuntu. One of them was sitting on the closet shelf and the battery went completely dead. When I charged the battery and tried to boot the it, I got the "No init found" error. In trying to follow the suggested way to fix it posted here, I used the Startup Disk Creator on my Ubuntu 11.10 desktop machine to create a USB stick with a bootable Ubuntu 11.10 live CD on it (the netbook doesn't have a CD drive). I plugged the USB stick into the netbook with the init issues, went into the BIOS and selected the USB stick as the 1st choice to boot from, and did a hard restart. It then just stuck at the flashing underscore. Not knowing why it wasn't working, I tried booting my working netbook from the USB stick. When I got into the BIOS on the working netbook, I noticed the description in the boot order section for the USB device was different. On the non-working netbook, the description was SWISSBIT (the name of the USB stick) but on the working netbook it was just "Rem. Drive". I also noticed on the working netbook there was an additional option under the bootable order section that allowed me to choose which hard drive to boot from. This section showed two hard drives, one of them being my USB stick. So, rather than changing the device boot order, I selected the USB stick as the hard drive to boot from first and it worked like a champ - I was able to boot into the LiveCD on the USB stick. Seems to me the working netbook is seeing the LiveCD USB stick as a hard drive, where-as the non-working netbook is seeing it as a plain ol' USB stick. The BIOS is the exact same version on both netbooks... any idea why it works on one and not on the other?

  Read the article

• SSD seems dead after wakeup from Windows Sleep, BIOS stalls but doesn't find it anymore

  - by Abel

  The morning, the following scary scenario happened: I woke up my Windows system Typed in my username and got an error (something like "could not load security xxx", but unsure of exact wording) System auto-restarted after cliking OK It didn't boot up anymore to the SSD with Windows 7 OS (I have another disk I can boot to, but that doesn't see the disk either). Obviously, this happened right after I instantiated a backup procedure, which hasn't succeeded either. The BIOS can't find the drive when I connect to SATA. And it can't find the drive when I connect it to SAS. I have a Dell Workstation T7400, most recent BIOS (version A06), version of SAS Host Bus Adapter BIOS (HBA) is MPTBIOS 6.14.10.00 (2007.09.29) from LSI Logic Corp. Other findings: When connecting to SATA, the DELL Logo screen stays really long (5 minutes) and then at the end of POST it says that a drive is not found When connecting to SAS, the SAS HBA initializing phase takes long (2 minutes, against normally 15 seconds) When running Dell Diagnostics, it doesn't finish and gives the error Exception occurred in module MPCACHE.MDM file "IOAPICSP.ASM" line 1645. I contacted Dell. On their advice I tried different slots and different cables to no avail. I use an APIC battery power, spikes in the power are thus unlikely. My conclusion so far: the disk is dead. I need this disk very badly because it contains the last few days of important development of which not all code was checked in the moment this happened. Are there any ways to recover dead SSD drives? The drive is a new X25-M G2 160GB model SSDSA2M160G2GC 2.5" in an extension bay and has been running without issues for 3 months on SAS.

  Read the article

• HP tx2510us shuts down without warning, now won't boot, no BIOS codes, screen doesn't light

  - by Tim S

  Hey all, HP tx2150us worked great for a year and a half, rarely it would shut down instead of sleeping. It started running hot sometimes, I installed Win7, worked great, still running hot. Before Xmas, it gave me evidence of video errors - jagged lines, rows missing. That same night, it started rebooting, then it shut off and wouldn't boot. It gave me a BIOS code, I shut it off to look up the code online. When I turned it on again, it won't boot at all. The LEDs all light up, the fan, HD, and optical all spin up, but the screen never lights up and it doesn't try to boot, nor does it blink any BIOS codes. It just acts like it's sleeping, and won't wake up. I suspected heat problems, so I disassembled it, cleaned the crap out of the fan, and reassembled it, breaking the stereo mic connector. Oh well. When I reassembled it, it booted up into Win7 again, but kept shutting down for no discernible reason. After a dozen or so random reboots like that, it is now back to where it was - turns on but doesn't boot or give BIOS codes. The screen never lights, and everything spins up then idles. Any ideas? I really can't afford to buy a new one and I use(d) it to take ALL my notes, that's why I got a tablet in the first place.

  Read the article

• 10.10 freezing when sftp downloading

  - by aGr

  My ubuntu 10.10 is freezing during downloading from my other computer on sftp. I thought it might be some nautilus issues so I tried it via command line and I got the same thing - after few minutes the whole computer freezes. Mostly the numlock led is blinking (I've heard somewhere that this means a kernel panic), but not in 100% cases. I dunno if that helps but here is a log from /var/log/message in the time that this happened. At least I hope so - it wasn't that big, when it happened before. But this looks quite "errorish", right? (isn't complete - see bottom) Jan 5 17:57:49 tomas-ntb kernel: imklog 4.2.0, log source = /proc/kmsg started. Jan 5 17:57:49 tomas-ntb rsyslogd: [origin software="rsyslogd" swVersion="4.2.0" x-pid="953" x-info="http://www.rsyslog.com"] (re)start Jan 5 17:57:49 tomas-ntb rsyslogd: rsyslogd's groupid changed to 103 Jan 5 17:57:49 tomas-ntb rsyslogd: rsyslogd's userid changed to 101 Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] Initializing cgroup subsys cpuset Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] Initializing cgroup subsys cpu Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] Linux version 2.6.35-24-generic (buildd@vernadsky) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #42-Ubuntu SMP Thu Dec 2 01:41:57 UTC 2010 (Ubuntu 2.6.35-24.42-generic 2.6.35.8) Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] BIOS-provided physical RAM map: Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable) Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved) Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dffa8000 (usable) Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] BIOS-e820: 00000000dffa8000 - 00000000dffb0000 (ACPI NVS) Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] BIOS-e820: 00000000dffb0000 - 00000000dffbff00 (ACPI data) Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] BIOS-e820: 00000000dffbff00 - 00000000dfff0000 (ACPI NVS) Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] BIOS-e820: 00000000dfff0000 - 00000000e0000000 (reserved) Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved) Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable) Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] BIOS-e820: 0000000120000000 - 0000000140000000 (reserved) Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] DMI 2.5 present. Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] last_pfn = 0xdffa8 max_arch_pfn = 0x100000 Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] Scanning 0 areas for low memory corruption Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] modified physical RAM map: Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] modified: 0000000000010000 - 000000000009e800 (usable) Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] modified: 000000000009e800 - 00000000000a0000 (reserved) Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] modified: 0000000000100000 - 00000000dffa8000 (usable) ... to long - for whole and better view click here

  Read the article

• Can't install Windows 7 on Acer Aspire M1100

  - by r0ca

  When I install Windows 7, everything goes smooth but as soon as it's done and Windows needs to reboot for the last time before getting the desktop, the computer stucks to Verify DMI Pool Data............. and then, nothing. I change the CMOS battery, I tried so many setup in BIOS, even load default settings... Nothing worked. The HDD light is not flickering anymore, no HDD activity. CTRL-ALT-DEL doesn't work. It's just impossible to load Windows 7. I tried Windows XP and this works fine. I also tried the Acer (Futureshop) recovery CD and I get an Hexademical error message stating the install cannot continue. Is there a BIOS flash apps somewhere or a fix I can apply to have Windows 7 Ultimate installed on my computer. Any takers?

  Read the article

< Previous Page | 6 7 8 9 10 11 12 13 14 15 16 17  | Next Page >