Search Results

Search found 13968 results on 559 pages for 'device dependent routing'.

Page 10/559 | < Previous Page | 6 7 8 9 10 11 12 13 14 15 16 17 | Next Page >

PFSence VPN Routing

- by SvrGuy

We use PFSense firewalls at three installations with the following LAN networks: 1.) Datacenter #1: 10.0.0.0/16 2.) Datacenter #2: 10.1.0.0/16 3.) HQ: 10.2.0.0/16 All of these locations are linked via an IPSEC tunnel that works properly. Hosts in any of the above networks can communicate with hosts in any other of the above networks. Now, for our laptops etc. we established a road warrior network 10.3.0.0/16 and have implemented OpenVPN to link the laptops etc. to Datacenter #1. This works great too, so our laptops can connect and communicate with any host in Datacenter #1 (anything on 10.0.0.0/16) The problem is the laptops can't communicate with any hosts that Datacenter #1 can reach by its IPSEC tunnel to Datacenter #2 (and/or the HQ for that matter). Does anyone know what to do configuration wise on the PFSense box in Datacenter #1 to configure to route packets received on the OpenVPN tunnel to Datacenter #2 over the IPSEC tunnel? It could be a setting on the OpenVPN or some sort of static route or some such. Any ideas?

Read the article
Routing between two networks on linux?

- by gGololicic

I got stuck with one problem I cant find solution. I have linux pc with two NIC. first nic (eth1) is connected to public ip (probably switch or whatever, doesnt really mater) so eth1 is connected to wan and another eth0 that I connected to switch and make it a lan nic. configuration: eth1 ip address 88.200.1xx.xxx //xxx's are cuz of security reasons eth0 ip address 192.168.1.1 wan ------ [eth1 (linux PC) eth0]<----[switch]<---- [eth1 (PC1)] Now I want to connect this two networks, so PC1 can access linux PC and wan. I think I know how to do it but I cant confiugre it right. This is what I tried: I turend on ip forwarding (for sure) I set eth1 default gw to the right ip on the wan I tried to set eth0 default gw to the same ip (but i couldnt) What or how can I do this, I was trying with linux route command, but I got stuck. Please help.

Read the article
Iptables: masquarading and routing

- by nixnotwin

I have a WAN router which is linked to isp over a /30 WAN subnet. But it also servers as a router to a /29 local public WAN subnet which is connected to few of my servers. The traffic from /29 gets routed to ISP via /30 subnet. For a wired reason I want to masqarade (NAT) the interface which has /30 ip. So the interface with /30 ip should appear as masquaraded for my 192.168.1.0/24 network and it also should act as a normal non-NAT router for my WAN public subnet /29. Can this be done with iptables on a Linux machine?

Read the article
Manual Http error response code in non-existent folder via routing

- by Slytherin

Apache server running on ubuntu-like linux I am getting unexpected behaviour when i try to manually send error response. If my .htaccess is responsible for the error response , then appropriate error document is loaded and displayed , with according response code in browser console. However , if my router is origin of the response code , then i get blank screen , but correct response code. .htaccess looks like this RewriteEngine On # RewriteBase / RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule !\.(css|js|icon|zip|rar|png|jpg|gif|pdf)$ index.php [L] ErrorDocument 404 /err/404.html ErrorDocument 403 /err/403.html ErrorDocument 500 /err/500.html part of my router that sends the response is the following header("HTTP/1.1 403 Forbidden"); trying this format didnt help either header("HTTP/1.1 403 Forbidden", TRUE, 403); I also tried HTTP/1.0. Furthermore i was thinking that maybe relative path to error page might be an issue , but discarded this idea after attempting to access a document that is forbidden via .htaccess EDIT I should also point out , this scenario happens when URL for not-existing article is requested. Is it possible that Server is looking for a .htaccess file in a folder based on URL ? Eg: domain/blog/non-existent , is server looking for blog folder ? I am specifically asking this because there is no blog folder

Read the article
sporadic routing to another website when opening a common url

- by user226098

I have a strange problem in our office: Sometimes when opening a url from one of our projects random url in any browser not the right website shows up but some other website. In most of the cases it redirects to google.com with some parameters like https://www.google.de/?gfe_rd=cr&ei=krOOU8_kGcSKswadyYDQBw&gws_rd=ssl or just the ugly google 404 page). But today it remains on the origial url but shows up the the content of http://debug.netdna-cdn.com/. This happens about 1 time a week and for no apparent reason. Even stranger it only occurs on a single pc in the network. It now happens on two different computers in the network. Both use windows 8. The problem cannot be fixed by clearing the browser cache but by rebooting the pc or using ipconfig /flushdns. So I think it has something to do with the dns cache of the machine. But I have no idea what the reason is for this and how i can figure out how to solve it. Any ideas?

Read the article
Amazon EC2 + SSL Godaddy are not routing properly in HTTPS

- by azngunit81

I have an Amazon EC2 + SSL just installed on GoDaddy. I have successfully managed to install it and get the green https on the main domain https://www.example.com however it doesn't any https://www.example.com/something but the route works under http://www.example.com I am using an .htacess file for some rewrite. Options -MultiViews RewriteEngine On RewriteCond %{REQUEST_FILENAME} !-f RewriteRule ^ index.php [L] the Ec2 instance is ubuntu if that helps in anyway.

Read the article
Routing between same networks

- by osmandfj

I have two different sites: NetA has a subnet 192.168.2.0/24 NetB has 192.168.1.0/24. The two sites connect each other via IPsec VPN with fortigate devices. I need to move a server with IP address 192.168.2.240 from NetA to NetB and I cannot change its IP address due to some specific reasons. My question is; if I move that server from NetA to NetB, is it possible to reach that server from NetA?

Read the article
Rails 3) Delete, Destory, and Routing

- by Maximus S

The problem is the code below <%= button_to t('.delete'), @post, :method => :delete, :class => :destroy %> My Post model has many relations that are dependent on delete. However, the code above will only remove the post, leaving its relations intact. The problem is that methods delete and destroy are different in that method delete doesn't instantiate the object. So I need to use "destroy" instead of "delete" my post. <%= button_to t('.delete'), @post, :method => :destroy %> gives me routing error. No route matches [POST] "/posts/2" <%= button_to t('.delete'), @post, Post.destroy(@post) %> deletes the post without clicking the button. Could anyone help me with this? UPDATE: application.js //= require jquery //= require jquery-ui //= require jquery_ujs //= require bootstrap-modal //= require bootstrap-typeahead //= require_tree . rake routes DELETE (/:locale)/posts/:id(.:format) posts#destroy Post model has_many :tag_links, :dependent => :destroy has_many :tags, :through => :tag_links Tag model has_many :tag_links, :dependent => :destroy has_many :posts, :through => :tag_links Problem: When I delete a post, all the tag_links are destroyed but tags still exist.

Read the article
Http Modules are called on every request when using mvc/routing module

- by MartinF

I am developing a http module that hooks into the FormsAuthentication Module through the Authenticate event. While debugging i noticed that the module (and all other modules registered) gets hit every single time the client requests a resource (also when it requests images, stylesheets, javascript files (etc.)). This happens both when running on a IIS 7 server in integrated pipeline mode, and debugging through the webdev server (in non- integrated pipeline mode) As i am developing a website with a lot images which usually wont be cached by the client browser it will hit the modules a lot of unnessecary times. I am using MVC and its routing mechanishm (System.Web.Routing.UrlRoutingModule). When creating a new website the runAllManagedModulesForAllRequests attribute for the IIS 7 (system.webServer) section is per default set to true in the web.config, which as the name indicates make it call all modules for every single request. If i set the runAllManagedModulesForAllRequests attribute to false, no modules will get called. It seems that the reason for this is because of the routing module or mvc (dont know excactly why), which causes that the asp.net (aspx) handler never gets called and therefore the events and the modules never gets called (one time only like supposed). I tested this by trying to call "mydomain.com/Default.aspx" instead of just "mydomain.com/" and correctly it calls the modules only once like it is supposed. How do i fix this so it only calls the modules once when the page is requested and not also when all other resources are requested ? Is there some way i can register that all requests should fire the asp.net (aspx) handler, except requests for specific filetype extensions ? Of course that wont fix the problem if i choose to go with urls like /content/images/myimage123 for the images (without the extension). But i cant think of any other way to fix it. Is there a better way to solve this problem ? I have tried to set up an ignoreRoute like this routes.IgnoreRoute("content/{*pathInfo}"); where the content folder contains all the images, javascripts and stylesheets in seperat subfolders, but it doesnt seem to change anything. I can see there a many different possibilites when setting up a handler but I cant seem to figure out how it should be possible to setup one that will make it possible to use the routing module and have urls like /blog/post123 and not call the modules when requesting images, javascripts and stylesheets (etc.). Hope anyone out there can help me ? Martin

Read the article
ASP.NET MVC hosting problem, routing, handlers and modules

- by johnabs

Hi, This is one of them again, hosting with fasthosts. I recently purchased a windows developer package from them. When I tried to deploy my ASP.NET 3.5 MVC project, which was working fine with the same host on a reseller account, it is not working. The reason to move from reseller to a normal Windows Developer package is, the MS-SQL server database is too expensive in a reseller account, strange! I contact them, and they are saying they upgraded the control panel. The technical support said, I need to disable the Modules and Handlers from the web.config file. Also I need to deploy them as .dll files. I am not sure how to do that. The website is partially working now. I think the problem is now with the routing. I have not deployed any .dlls apart from the System.Web.Mvc.dll, System.Web.Routing.dll and System.Web.Abstractions.dll. I have not got a clue on how to deploy the Modules and Handlers. The code that I commented on the web.config file is as follows.  Anybody got any ideas please. Thank you for your time.

Read the article
asp.net mvc url routing

- by progtick

How do I map something like domain.com/username? The problem is I think that the MVC routing looks for the controller to determine how it should handle the mapping request. I am pretty new to ASP.NET MVC. However, based on the tutorials so far, the routing mechanism seems rather rigid.

Read the article
Routing and Membership

- by Curtis White

I have a page that uses routing and it works fine under Visual web developer. But when I deployed to IIS 7. The page that uses routing doesn't seem to recognize the user is logged in. I think I read about this but had not seen it until now. Hope there is a fix! Environment deployed too is ASP.NET 3.5 SP1, SQL SERVER 2008, and IIS 7 integrated. Thanks.

Read the article
Underscore as a segment_separators in routing.yml

- by Mickael

In symfony project, I would like to use an underscore as a separator for the parameter in routing.yml. Url example: /article/lorem-1111_45.html In routing.yml rule_sample: url: /article/:info-:datePublished_:id.html param: { module: cms, action: test } options: segment_separators: ['-', '/', '.', '_'] requirements: info: ^([A-Za-z0-9\-]+)$ datePublished: \d+ id: \d+ This code doesnt work. I have the following error: Unable to parse "/article/:info-:datePublished_:id.html" route near ":id.html". Anybody knows how to implement this rule ?

Read the article
setting up routing for the first time

- by user334017

I'm trying to set up url routing on my server for the first time. I'm fairly sure that mod_rewrite is enabled. Are there any other configurations I need to change or things to set up? Should the routing.yml file just automatically get read?

Read the article
Symfony: Special routing for mobile browsers

- by Migol

Is there any way that I can detect browser type on routing and use specific controller? I want to be able to do something like this in routing.yml: mobile: url: /* requirements: browser: mobile

Read the article
Routing algorithm

- by isaac

Hello, I'm giving a presentation about computer routing and I want to make a good analogy with a real-world situation. However, I could not find it. Do you have in mind any of the situations like the computer routing. If yes, could you please provide me with it

Read the article
ASP.NET Routing not working on IIS 7.0

- by Rick Strahl

I ran into a nasty little problem today when deploying an application using ASP.NET 4.0 Routing to my live server. The application and its Routing were working just fine on my dev machine (Windows 7 and IIS 7.5), but when I deployed (Windows 2008 R1 and IIS 7.0) Routing would just not work. Every time I hit a routed url IIS would just throw up a 404 error: This is an IIS error, not an ASP.NET error so this doesn’t actually come from ASP.NET’s routing engine but from IIS’s handling of expressionless URLs. Note that it’s clearly falling through all the way to the StaticFile handler which is the last handler to fire in the typical IIS handler list. In other words IIS is trying to parse the extension less URL and not firing it into ASP.NET but failing. As I mentioned on my local machine this all worked fine and to make sure local and live setups match I re-copied my Web.config, double checked handler mappings in IIS and re-copied the actual application assemblies to the server. It all looked exactly matched. However no workey on the server with IIS 7.0!!! Finally, totally by chance, I remembered the runAllManagedModulesForAllRequests attribute flag on the modules key in web.config and set it to true: <system.webServer> <modules runAllManagedModulesForAllRequests="true"> <add name="ScriptCompressionModule" type="Westwind.Web.ScriptCompressionModule,Westwind.Web" /> </modules> </system.webServer> And lo and behold, Routing started working on the live server and IIS 7.0! This seems really obvious now of course, but the really tricky thing about this is that on IIS 7.5 this key is not necessary. So on my Windows 7 machine ASP.NET Routing was working just fine without the key set. However on IIS 7.0 on my live server the same missing setting was not working. On IIS 7.0 this key must be present or Routing will not work. Oddly on IIS 7.5 it appears that you can’t even turn off the behavior – setting runtAllManagedModuleForAllRequests="false" had no effect at all and Routing continued to work just fine even with the flag set to false, which is NOT what I would have expected. Kind of disappointing too that Windows Server 2008 (R1) can’t be upgraded to IIS 7.5. It sure seems like that should have been possible since the OS server core changes in R2 are pretty minor. For the future I really hope Microsoft will allow updating IIS versions without tying them explicitly to the OS. It looks like that with the release of IIS Express Microsoft has taken some steps to untie some of those tight OS links from IIS. Let’s hope that’s the case for the future – it sure is nice to run the same IIS version on dev and live boxes, but upgrading live servers is too big a deal to do just because an updated OS release came out. Moral of the story – never assume that your dev setup will work as is on the live setup. It took me forever to figure this out because I assumed that because my web.config on the local machine was fine and working and I copied all relevant web.config data to the server it can’t be the configuration settings. I was looking everywhere but in the .config file forever before getting desperate and remembering the flag when I accidentally checked the intellisense settings in the modules key. Never assume anything. The other moral is: Try to keep your dev machine and server OS’s in sync whenever possible. Maybe it’s time to upgrade to Windows Server 2008 R2 after all. More info on Extensionless URLs in IIS Want to find out more exactly on how extensionless Urls work on IIS 7? The check out How ASP.NET MVC Routing Works and its Impact on the Performance of Static Requests which goes into great detail on the complexities of the process. Thanks to Jeff Graves for pointing me at this article – a great linked reference for this topic!© Rick Strahl, West Wind Technologies, 2005-2011Posted in IIS7 Windows

Read the article
How to disable Device mapper package from kickstart?

- by MA1

Can anyone tell me how to disable/exclude Device mapper package from kickstart file.

Read the article
distributed, fault-tolerant network block device

- by gucki

I'm looking for a distributed, fault-tolerant network storage system which exposes block devices (not filesystems) on the clients. A client's block device should write simultaneously to several storage nodes A client's block device should not fail as long as not all storage nodes backing it went down The master should automatically redistribute storages' data when a storage node fails or gets added/ removed A single master (which is for metadata only) is fine So ideally the architecture would be very similar to moosefs (http://www.moosefs.org/) but instead of exposing a real filesystem mounted using a fuse client it'd expose block devices on the clients. I know of iscsi and drbd but both don't seem to offer what I'm looking for. Or am I missing something?

Read the article
Unable to enumerate USB device

- by takeshin

Hello, My syslog is constantly filled with messages like this: Oct 16 11:48:35 my-laptop kernel: [61470.980078] hub 1-0:1.0: unable to enumerate USB device on port 2 Oct 16 11:48:35 my-laptop kernel: [61471.192079] hub 3-0:1.0: unable to enumerate USB device on port 2 The only USB device I use is Microsoft Natural Wireless Laser Mouse 7000. The laptop model is HP dv9500, Ubuntu 10.10, but the same was in the versions before. How can I fix this? Edit: Here's the output of sudo lsusb: Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 003: ID 045e:071d Microsoft Corp. Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub All USB devices seems to be working fine. I have some problems with DVD-R and sound card, but they are not USB.

Read the article
How to help FGLRX detect a device

- by user113416

I have HD 4850 card, Ubuntu 12.10 and installed legacy drivers using makson96 ppa. The issue is, that FGLRX can not detect my device and loads vesa bios. I had the same problem on ubuntu 11.10, 12.04 versions. I want to manually help fglrx find a matching device to load as it shoudld do. It is interesting, why does fglrx search for a device in a PCI:0@1:0:1 Bus? in xorg.cof different bus is indicated: Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection fglrxinfo display: :0.0 screen: 0 OpenGL vendor string: Advanced Micro Devices, Inc. OpenGL renderer string: ATI Radeon HD 4800 Series OpenGL version string: 3.3.11653 Compatibility Profile Context Here is a part of my xorg log: [ 3.846] (II) VESA: driver for VESA chipsets: vesa [ 3.846] (II) FBDEV: driver for framebuffer: fbdev [ 3.846] (++) using VT number 7 [ 3.846] (WW) Falling back to old probe method for fglrx [ 3.883] (II) Loading PCS database from /etc/ati/amdpcsdb [ 3.883] (--) Assigning device section with no busID to primary device [ 3.883] (--) Chipset Supported AMD Graphics Processor (0x9442) found [ 3.884] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found [ 3.884] (II) AMD Video driver is running on a device belonging to a group targeted for this release [ 3.884] (II) AMD Video driver is signed [ 3.884] (II) fglrx(0): pEnt->device->identifier=0xb7791d8f [ 3.884] (WW) Falling back to old probe method for vesa [ 3.884] (WW) Falling back to old probe method for fbdev Thanks in advance.

Read the article
export block device over network without root

- by dschatz

I'm trying to export a file as a block device over the network. I do not have root access on the machine where the file exists. I do have root access on the machine(s) where I will mount the block device. I've seen ATA-Over-Ethernet and ISCSI but there don't seem to be any implementations which allow me to export the block without root at least (some even require kernel modules). Is there an implementation of either of these or some other protocol that doesn't require root? Perhaps I can tunnel ethernet over IP to do this?

Read the article
IP address spoofing using Source Routing

- by iamrohitbanga

With IP options we can specify the route we want an IP packet to take while connecting to a server. If we know that a particular server provides some extra functionality based on the IP address can we not utilize this by spoofing an IP packet so that the source IP address is the privileged IP address and one of the hosts on the Source Routing is our own. So if the privileged IP address is x1 and server IP address is x2 and my own IP address is x3. I send a packet from x1 to x2 which is supposed to pass through x3. x1 does not actually send the packet. It is just that x2 thinks the packet came from x1 via x3. Now in response if x2 uses the same routing policy (as a matter of courtesy to x1) then all packets would be received by x3. Will the destination typically use the same IP address sequences as specified in the routing header so that packets coming from the server pass through my IP where I can get the required information? Can we not spoof a TCP connection in the above case? Is this attack used in practice?

Read the article
External USB attached drive works in Windows XP but not in Windows 7. How to fix?

- by irrational John

Earlier this week I purchased this "N52300 EZQuest Pro" external hard drive enclosure from here. I can connect the enclosure using USB 2.0 and access the files in both NTFS partitions on the MBR partitioned drive when I use either Windows XP (SP3) or Mac OS X 10.6. So it works as expected in XP & Snow Leopard. However, the enclosure does not work in Windows 7 (Home Premium) either 64-bit or 32-bit or in Ubuntu 10.04 (kernel 2.6.32-23-generic). I'm thinking this must be a Windows 7 driver problem because the enclosure works in XP & Snow Leopard. I do know that no special drivers are required to use this enclosure. It is supported using the USB mass storage drivers included with XP and OS X. It should also work fine using the mass storage support in Windows 7, no? FWIW, I have also tried using 32-bit Windows 7 on both my desktop, a Gigabyte GA-965P-DS3 with a Pentium Dual-Core E6500 @ 2.93GHz, and on my early 2008 MacBook. I see the same failure in both cases that I see with 64-bit Windows 7. So it doesn't appear to be specific to one hardware platform. I'm hoping someone out there can help me either get the enclosure to work in Windows 7 or convince me that the enclosure hardware is bad and should be RMAed. At the moment though an RMA seems pointless since this appears to be a (Windows 7) device driver problem. I have tried to track down any updates to the mass storage drivers included with Windows 7 but have so far come up empty. Heck, I can't even figure out how to place a bug report with Microsoft since apparently the grace period for Windows 7 email support is only a few months. I came across a link to some USB troubleshooting steps in another question. I haven't had a chance to look over the suggestions on that site or try them yet. Maybe tomorrow if I have time ... ;-) I'll finish up with some more details about the problem. When I connect the enclosure using USB to Windows 7 at first it appears everything worked. Windows detects the drive and installs a driver for it. Looking in Device Manager there is an entry under the Hard Drives section with the title, Hitachi HDT721010SLA360 USB Device. When you open Windows Disk Management the first time after the enclosure has been attached the drive appears as "Not initialize" and I'm prompted to initialize it. This is bogus. After all, the drive worked fine in XP so I know it has already been initialized, partitioned, and formatted. So of course I never try to initialize it "again". (It's a 1 GB drive and I don't want to lose the data on it). Except for this first time, the drive never shows up in Disk Management again unless I uninstall the Hitachi HDT721010SLA360 USB Device entry under Hard Drives, unplug, and then replug the enclosure. If I do that then the process in the previous paragraph repeats. In Ubuntu the enclosure never shows up at all at the file system level. Below are an excerpt from kern.log and an excerpt from the result of lsusb -v after attaching the enclosure. It appears that Ubuntu at first recongnizes the enclosure and is attempting to attach it, but encounters errors which prevent it from doing so. Unfortunately, I don't know whether any of this info is useful or not. excerpt from kern.log [ 2684.240015] usb 1-2: new high speed USB device using ehci_hcd and address 22 [ 2684.393618] usb 1-2: configuration #1 chosen from 1 choice [ 2684.395399] scsi17 : SCSI emulation for USB Mass Storage devices [ 2684.395570] usb-storage: device found at 22 [ 2684.395572] usb-storage: waiting for device to settle before scanning [ 2689.390412] usb-storage: device scan complete [ 2689.390894] scsi 17:0:0:0: Direct-Access Hitachi HDT721010SLA360 ST6O PQ: 0 ANSI: 4 [ 2689.392237] sd 17:0:0:0: Attached scsi generic sg7 type 0 [ 2689.395269] sd 17:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2689.395632] sd 17:0:0:0: [sde] Write Protect is off [ 2689.395636] sd 17:0:0:0: [sde] Mode Sense: 11 00 00 00 [ 2689.395639] sd 17:0:0:0: [sde] Assuming drive cache: write through [ 2689.412003] sd 17:0:0:0: [sde] Assuming drive cache: write through [ 2689.412009] sde: sde1 sde2 [ 2689.455759] sd 17:0:0:0: [sde] Assuming drive cache: write through [ 2689.455765] sd 17:0:0:0: [sde] Attached SCSI disk [ 2692.620017] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2707.740014] usb 1-2: device descriptor read/64, error -110 [ 2722.970103] usb 1-2: device descriptor read/64, error -110 [ 2723.200027] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2738.320019] usb 1-2: device descriptor read/64, error -110 [ 2753.550024] usb 1-2: device descriptor read/64, error -110 [ 2753.780020] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2758.810147] usb 1-2: device descriptor read/8, error -110 [ 2763.940142] usb 1-2: device descriptor read/8, error -110 [ 2764.170014] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2769.200141] usb 1-2: device descriptor read/8, error -110 [ 2774.330137] usb 1-2: device descriptor read/8, error -110 [ 2774.440069] usb 1-2: USB disconnect, address 22 [ 2774.440503] sd 17:0:0:0: Device offlined - not ready after error recovery [ 2774.590023] usb 1-2: new high speed USB device using ehci_hcd and address 23 [ 2789.710020] usb 1-2: device descriptor read/64, error -110 [ 2804.940020] usb 1-2: device descriptor read/64, error -110 [ 2805.170026] usb 1-2: new high speed USB device using ehci_hcd and address 24 [ 2820.290019] usb 1-2: device descriptor read/64, error -110 [ 2835.520027] usb 1-2: device descriptor read/64, error -110 [ 2835.750018] usb 1-2: new high speed USB device using ehci_hcd and address 25 [ 2840.780085] usb 1-2: device descriptor read/8, error -110 [ 2845.910079] usb 1-2: device descriptor read/8, error -110 [ 2846.140023] usb 1-2: new high speed USB device using ehci_hcd and address 26 [ 2851.170112] usb 1-2: device descriptor read/8, error -110 [ 2856.300077] usb 1-2: device descriptor read/8, error -110 [ 2856.410027] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 2856.730033] usb 3-2: new full speed USB device using uhci_hcd and address 11 [ 2871.850017] usb 3-2: device descriptor read/64, error -110 [ 2887.080014] usb 3-2: device descriptor read/64, error -110 [ 2887.310011] usb 3-2: new full speed USB device using uhci_hcd and address 12 [ 2902.430021] usb 3-2: device descriptor read/64, error -110 [ 2917.660013] usb 3-2: device descriptor read/64, error -110 [ 2917.890016] usb 3-2: new full speed USB device using uhci_hcd and address 13 [ 2922.911623] usb 3-2: device descriptor read/8, error -110 [ 2928.051753] usb 3-2: device descriptor read/8, error -110 [ 2928.280013] usb 3-2: new full speed USB device using uhci_hcd and address 14 [ 2933.301876] usb 3-2: device descriptor read/8, error -110 [ 2938.431993] usb 3-2: device descriptor read/8, error -110 [ 2938.540073] hub 3-0:1.0: unable to enumerate USB device on port 2 excerpt from lsusb -v Bus 001 Device 017: ID 0dc4:0000 Macpower Peripherals, Ltd Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0dc4 Macpower Peripherals, Ltd idProduct 0x0000 bcdDevice 0.01 iManufacturer 1 EZ QUEST iProduct 2 USB Mass Storage iSerial 3 220417 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 5 Config0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 4 Interface0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Update: Results using Firewire to connect. Today I recieved a 1394b 9 pin to 1394a 6 pin cable which allowed me to connect the "EZQuest Pro" via Firewire. Everything works. When I use Firewire I can connect whether I'm using Windows 7 or Ubuntu 10.04. I even tried booting my Gigabyte desktop as an OS X 10.6.3 Hackintosh and it worked there as well. (Though if I recall correctly, it also worked when using USB 2.0 and booting OS X on the desktop. Certainly it works with USB 2.0 and my MacBook.) I believe the firmware on the device is at the latest level available, v1.07. I base this on the excerpt below from the OS X System Profiler which shows Firmware Revision: 0x107. Bottom line: It's nice that the enclosure is actually usable when I connect with Firewire. But I am still searching for an answer as to why it does not work correctly when using USB 2.0 in Windows 7 (and Ubuntu ... but really Windows 7 is my biggest concern). OXFORD IDE Device 1: Manufacturer: EZ QUEST Model: 0x0 GUID: 0x1D202E0220417 Maximum Speed: Up to 800 Mb/sec Connection Speed: Up to 400 Mb/sec Sub-units: OXFORD IDE Device 1 Unit: Unit Software Version: 0x10483 Unit Spec ID: 0x609E Firmware Revision: 0x107 Product Revision Level: ST6O Sub-units: OXFORD IDE Device 1 SBP-LUN: Capacity: 1 TB (1,000,204,886,016 bytes) Removable Media: Yes BSD Name: disk3 Partition Map Type: MBR (Master Boot Record) S.M.A.R.T. status: Not Supported

Read the article
retrieving detailed usb midi device information on windows xp

- by user557353

The function midiOutGetDevCaps returns a structure MIDIOUTCAPS. I'd need more specific information when querying a usb midi device on windows xp, in particular I'd need the information displayed under "Location" when opening the respective device using the Device Manager. I need this information in order to programmatically distinguish between several MIDI Interfaces connected to a computer. Using midiOutGetDevCaps, I uniformly get "USB Audio Device" for every midi usb interface connected to the computer, so distinguishing between the interfaces is impossible.

Read the article

< Previous Page | 6 7 8 9 10 11 12 13 14 15 16 17 | Next Page >