Search Results

Search found 244 results on 10 pages for 'fprintf'.

Page 10/10 | < Previous Page | 6 7 8 9 10 

  • Why is syslog so much slower than file IO?

    - by ceving
    I wrote a simple test program to measure the performance of the syslog function. This are the results of my test system: (Debian 6.0.2 with Linux 2.6.32-5-amd64) Test Case Calls Payload Duration Thoughput [] [MB] [s] [MB/s] -------------------- ---------- ---------- ---------- ---------- syslog 200000 10.00 7.81 1.28 syslog %s 200000 10.00 9.94 1.01 write /dev/null 200000 10.00 0.03 343.93 printf %s 200000 10.00 0.13 76.29 The test program did 200000 system calls writing 50 Bytes of data during each call. Why is Syslog more than ten times slower than file IO? This is the program I used to perform the test: #include <fcntl.h> #include <stdio.h> #include <string.h> #include <sys/stat.h> #include <sys/time.h> #include <sys/types.h> #include <syslog.h> #include <unistd.h> const int iter = 200000; const char msg[] = "123456789 123456789 123456789 123456789 123456789"; struct timeval t0; struct timeval t1; void start () { gettimeofday (&t0, (void*)0); } void stop () { gettimeofday (&t1, (void*)0); } void report (char *action) { double dt = (double)t1.tv_sec - (double)t0.tv_sec + 1e-6 * ((double)t1.tv_usec - (double)t0.tv_usec); double mb = 1e-6 * sizeof (msg) * iter; if (action == NULL) printf ("Test Case Calls Payload Duration Thoughput \n" " [] [MB] [s] [MB/s] \n" "-------------------- ---------- ---------- ---------- ----------\n"); else { if (strlen (action) > 20) action[20] = 0; printf ("%-20s %-10d %-10.2f %-10.2f %-10.2f\n", action, iter, mb, dt, mb / dt); } } void test_syslog () { int i; openlog ("test_syslog", LOG_PID | LOG_NDELAY, LOG_LOCAL0); start (); for (i = 0; i < iter; i++) syslog (LOG_DEBUG, msg); stop (); closelog (); report ("syslog"); } void test_syslog_format () { int i; openlog ("test_syslog", LOG_PID | LOG_NDELAY, LOG_LOCAL0); start (); for (i = 0; i < iter; i++) syslog (LOG_DEBUG, "%s", msg); stop (); closelog (); report ("syslog %s"); } void test_write_devnull () { int i, fd; fd = open ("/dev/null", O_WRONLY); start (); for (i = 0; i < iter; i++) write (fd, msg, sizeof(msg)); stop (); close (fd); report ("write /dev/null"); } void test_printf () { int i; FILE *fp; fp = fopen ("/tmp/test_printf", "w"); start (); for (i = 0; i < iter; i++) fprintf (fp, "%s", msg); stop (); fclose (fp); report ("printf %s"); } int main (int argc, char **argv) { report (NULL); test_syslog (); test_syslog_format (); test_write_devnull (); test_printf (); }

    Read the article

  • Concat wchar_t Unicode strings in C?

    - by Doori Bar
    I'm a beginner, I play with FindFirstFileW() of the winapi - C. The unicoded path is: " \\?\c:\Français\", and I would like to concat "*" to this path of type wchar_t (then I will use it as an arg for FindFirstFileW()). I made two test cases of mine, the first is ansi_string() which seem to work fine, the second is unicode_string() - which I don't quite understand how should I concat the additional "*" char to the unicoded path. I write the strings to a file, because I'm not able to print Unicoded characters to stdout. Note: my goal is to learn, which means I'll appreciate guidance and references to the appropriate resources regards my scenario, I'm very much a beginner and this is my first attempt with Unicode. Thanks, Doori Bar #include <stdio.h> #include <stdlib.h> #include <wchar.h> #include <string.h> #include <errno.h> void *error_malloc(int size); void ansi_string(char **str1, char **str2); void unicode_string(wchar_t **wstr1, wchar_t **wstr2); void unicode_string(wchar_t **wstr1, wchar_t **wstr2) { /* assign wstr1 with the path: \\?\c:\Français\ */ *wstr1 = error_malloc((wcslen(L"\\\\?\\c:\\Français\\")+1) *sizeof(**wstr1)); wcscpy(*wstr1,L"\\\\?\\c:\\Français\\"); /* concat wstr1+"*" , assign wstr2 with: \\?\c:\Français\* */ *wstr2 = error_malloc((wcslen(*wstr1) + 1 + 1) * sizeof(**wstr1)); /* swprintf(*wstr2,"%ls*",*wstr1); */ /* how should I concat wstr1+"*"? */ wcscpy(*wstr2,L"\\\\?\\c:\\Français\\"); } void ansi_string(char **str1, char **str2) { /* assign str1 with the path: c:\English\ */ *str1 = error_malloc(strlen("c:\\English\\") + 1); strcpy(*str1,"c:\\English\\"); /* concat str1+"*" , assign str2 with: c:\English\* */ *str2 = error_malloc(strlen(*str1) + 1 + 1); sprintf(*str2,"%s*",*str1); } void *error_malloc(int size) { void *ptr; int errornumber; if ((ptr = malloc(size)) == NULL) { errornumber = errno; fprintf(stderr,"Error: malloc(): %d; Error Message: %s;\n", errornumber,strerror(errornumber)); exit(1); } return ptr; } int main(void) { FILE *outfile; char *str1; char *str2; wchar_t *wstr1; wchar_t *wstr2; if ((outfile = fopen("out.bin","w")) == NULL) { printf("Error: fopen failed."); return 1; } ansi_string(&str1,&str2); fwrite(str2, sizeof(*str2), strlen(str2), outfile); printf("strlen: %d\n",strlen(str2)); printf("sizeof: %d\n",sizeof(*str2)); free(str1); free(str2); unicode_string(&wstr1,&wstr2); fwrite(wstr2, sizeof(*wstr2), wcslen(wstr2), outfile); printf("wcslen: %d\n",wcslen(wstr2)); printf("sizeof: %d\n",sizeof(*wstr2)); free(wstr1); free(wstr2); fclose(outfile); return 0; }

    Read the article

  • bind() fails with windows socket error 10038

    - by herrturtur
    I'm trying to write a simple program that will receive a string of max 20 characters and print that string to the screen. The code compiles, but I get a bind() failed: 10038. After looking up the error number on msdn (socket operation on nonsocket), I changed some code from int sock; to SOCKET sock which shouldn't make a difference, but one never knows. Here's the code: #include <iostream> #include <winsock2.h> #include <cstdlib> using namespace std; const int MAXPENDING = 5; const int MAX_LENGTH = 20; void DieWithError(char *errorMessage); int main(int argc, char **argv) { if(argc!=2){ cerr << "Usage: " << argv[0] << " <Port>" << endl; exit(1); } // start winsock2 library WSAData wsaData; if(WSAStartup(MAKEWORD(2,0), &wsaData)!=0){ cerr << "WSAStartup() failed" << endl; exit(1); } // create socket for incoming connections SOCKET servSock; if(servSock=socket(AF_INET, SOCK_STREAM, IPPROTO_TCP)==INVALID_SOCKET) DieWithError("socket() failed"); // construct local address structure struct sockaddr_in servAddr; memset(&servAddr, 0, sizeof(servAddr)); servAddr.sin_family = AF_INET; servAddr.sin_addr.s_addr = INADDR_ANY; servAddr.sin_port = htons(atoi(argv[1])); // bind to the local address int servAddrLen = sizeof(servAddr); if(bind(servSock, (SOCKADDR*)&servAddr, servAddrLen)==SOCKET_ERROR) DieWithError("bind() failed"); // mark the socket to listen for incoming connections if(listen(servSock, MAXPENDING)<0) DieWithError("listen() failed"); // accept incoming connections int clientSock; struct sockaddr_in clientAddr; char buffer[MAX_LENGTH]; int recvMsgSize; int clientAddrLen = sizeof(clientAddr); for(;;){ // wait for a client to connect if((clientSock=accept(servSock, (sockaddr*)&clientAddr, &clientAddrLen))<0) DieWithError("accept() failed"); // clientSock is connected to a client // BEGIN Handle client cout << "Handling client " << inet_ntoa(clientAddr.sin_addr) << endl; if((recvMsgSize = recv(clientSock, buffer, MAX_LENGTH, 0)) <0) DieWithError("recv() failed"); cout << "Word in the tubes: " << buffer << endl; closesocket(clientSock); // END Handle client } } void DieWithError(char *errorMessage) { fprintf(stderr, "%s: %d\n", errorMessage, WSAGetLastError()); exit(1); }

    Read the article

  • Socket in C: recv overwrite a char[]

    - by Possa
    Hi all, I'm trying to make a little client-server script like many others that I've done in the past. But in this one I have a problem. It is better if I post the code and the output it give me. Code: #include <mysql.h> //not important now #include <stdlib.h> #include <sys/types.h> #include <sys/socket.h> #include <netinet/in.h> #include <arpa/inet.h> #include <netdb.h> #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <signal.h> #include <string.h> //constant definition #define SERVER_PORT 2121 #define LINESIZE 21 //global var definition char victim_ip[LINESIZE], file_write[LINESIZE], hacker_ip[LINESIZE]; //function void leggi (int); //not use now for debugging purpose //void scriviDB (); //not important now main () { int sock, client_len, fd; struct sockaddr_in server, client; // transport end point if((sock = socket(AF_INET, SOCK_STREAM, 0)) == -1) { perror("system call socket fail"); exit(1); } server.sin_family = AF_INET; server.sin_addr.s_addr = inet_addr("10.10.10.1"); server.sin_port = htons(SERVER_PORT); // binding address at transport end point if (bind(sock, (struct sockaddr *)&server, sizeof server) == -1) { perror("system call bind fail"); exit(1); } //fprintf(stderr, "Server open: listening.\n"); listen(sock, 5); /* managae client connection */ while (1) { client_len = sizeof(client); if ((fd = accept(sock, (struct sockaddr *)&client, &client_len)) < 0) { perror("accepting connection"); exit(1); } strcpy(hacker_ip, inet_ntoa(client.sin_addr)); printf("1 %s\n", hacker_ip); //debugging purpose //leggi(fd); ////////////////////////// //receive client recv(fd, victim_ip, LINESIZE, 0); victim_ip[sizeof(victim_ip)] = '\0'; printf("2 %s\n", hacker_ip); //debugging purpose recv(fd, file_write, LINESIZE, 0); file_write[sizeof(file_write)] = '\0'; printf("3 %s\n", hacker_ip); //debugging purpose printf("%s@%s for %s\n", file_write, victim_ip, hacker_ip); //send to client send(fd, hacker_ip, 40, 0); //now is hacker_ip for debug ///////////////////////// close(fd); }//end while exit(0); } //end main Client send string: ./send -i 10.10.10.4 -f filename.ext so the script send -i (IP) and -f (FILE) at the server. Here's my output server side: 1 10.10.10.6 2 10.10.10.6 3 [email protected] for As you can see the printf(3) and the printf(ip,file,ip) fail. I don't know how and where but someone overwrite my hacker_ip string. Thanks for your help! :)

    Read the article

  • C++ file input/output search

    - by Brian J
    Hi I took the following code from a program I'm writing to check a user generated string against a dictionary as well as other validation. My problem is that although my dictionary file is referenced correctly,the program gives the default "no dictionary found".I can't see clearly what I'm doing in error here,if anyone has any tips or pointers it would be appreciated, Thanks. //variables for checkWordInFile #define gC_FOUND 99 #define gC_NOT_FOUND -99 // static bool certifyThat(bool condition, const char* error) { if(!condition) printf("%s", error); return !condition; } //method to validate a user generated password following password guidelines. void validatePass() { FILE *fptr; char password[MAX+1]; int iChar,iUpper,iLower,iSymbol,iNumber,iTotal,iResult,iCount; //shows user password guidelines printf("\n\n\t\tPassword rules: "); printf("\n\n\t\t 1. Passwords must be at least 9 characters long and less than 15 characters. "); printf("\n\n\t\t 2. Passwords must have at least 2 numbers in them."); printf("\n\n\t\t 3. Passwords must have at least 2 uppercase letters and 2 lowercase letters in them."); printf("\n\n\t\t 4. Passwords must have at least 1 symbol in them (eg ?, $, £, %)."); printf("\n\n\t\t 5. Passwords may not have small, common words in them eg hat, pow or ate."); //gets user password input get_user_password: printf("\n\n\t\tEnter your password following password rules: "); scanf("%s", &password); iChar = countLetters(password,&iUpper,&iLower,&iSymbol,&iNumber,&iTotal); iUpper = countLetters(password,&iUpper,&iLower,&iSymbol,&iNumber,&iTotal); iLower =countLetters(password,&iUpper,&iLower,&iSymbol,&iNumber,&iTotal); iSymbol =countLetters(password,&iUpper,&iLower,&iSymbol,&iNumber,&iTotal); iNumber = countLetters(password,&iUpper,&iLower,&iSymbol,&iNumber,&iTotal); iTotal = countLetters(password,&iUpper,&iLower,&iSymbol,&iNumber,&iTotal); if(certifyThat(iUpper >= 2, "Not enough uppercase letters!!!\n") || certifyThat(iLower >= 2, "Not enough lowercase letters!!!\n") || certifyThat(iSymbol >= 1, "Not enough symbols!!!\n") || certifyThat(iNumber >= 2, "Not enough numbers!!!\n") || certifyThat(iTotal >= 9, "Not enough characters!!!\n") || certifyThat(iTotal <= 15, "Too many characters!!!\n")) goto get_user_password; iResult = checkWordInFile("dictionary.txt", password); if(certifyThat(iResult != gC_FOUND, "Password contains small common 3 letter word/s.")) goto get_user_password; iResult = checkWordInFile("passHistory.txt",password); if(certifyThat(iResult != gC_FOUND, "Password contains previously used password.")) goto get_user_password; printf("\n\n\n Your new password is verified "); printf(password); //writing password to passHistroy file. fptr = fopen("passHistory.txt", "w"); // create or open the file for( iCount = 0; iCount < 8; iCount++) { fprintf(fptr, "%s\n", password[iCount]); } fclose(fptr); printf("\n\n\n"); system("pause"); }//end validatePass method int checkWordInFile(char * fileName,char * theWord){ FILE * fptr; char fileString[MAX + 1]; int iFound = -99; //open the file fptr = fopen(fileName, "r"); if (fptr == NULL) { printf("\nNo dictionary file\n"); printf("\n\n\n"); system("pause"); return (0); // just exit the program } /* read the contents of the file */ while( fgets(fileString, MAX, fptr) ) { if( 0 == strcmp(theWord, fileString) ) { iFound = -99; } } fclose(fptr); return(0); }//end of checkwORDiNFile

    Read the article

  • TCP client in C and server in Java

    - by faldren
    I would like to communicate with 2 applications : a client in C which send a message to the server in TCP and the server in Java which receive it and send an acknowledgement. Here is the client (the code is a thread) : static void *tcp_client(void *p_data) { if (p_data != NULL) { char const *message = p_data; int sockfd, n; struct sockaddr_in serv_addr; struct hostent *server; char buffer[256]; sockfd = socket(AF_INET, SOCK_STREAM, 0); if (sockfd < 0) { error("ERROR opening socket"); } server = gethostbyname(ALARM_PC_IP); if (server == NULL) { fprintf(stderr,"ERROR, no such host\n"); exit(0); } bzero((char *) &serv_addr, sizeof(serv_addr)); serv_addr.sin_family = AF_INET; bcopy((char *)server->h_addr, (char *)&serv_addr.sin_addr.s_addr, server->h_length); serv_addr.sin_port = htons(TCP_PORT); if (connect(sockfd,(struct sockaddr *) &serv_addr,sizeof(serv_addr)) < 0) { error("ERROR connecting"); } n = write(sockfd,message,strlen(message)); if (n < 0) { error("ERROR writing to socket"); } bzero(buffer,256); n = read(sockfd,buffer,255); if (n < 0) { error("ERROR reading from socket"); } printf("Message from the server : %s\n",buffer); close(sockfd); } return 0; } And the java server : try { int port = 9015; ServerSocket server=new ServerSocket(port); System.out.println("Server binded at "+((server.getInetAddress()).getLocalHost()).getHostAddress()+":"+port); System.out.println("Run the Client"); while (true) { Socket socket=server.accept(); BufferedReader in= new BufferedReader(new InputStreamReader(socket.getInputStream())); System.out.println(in.readLine()); PrintStream out=new PrintStream(socket.getOutputStream()); out.print("Welcome by server\n"); out.flush(); out.close(); in.close(); System.out.println("finished"); } } catch(Exception err) { System.err.println("* err"+err); } With n = read(sockfd,buffer,255); the client is waiting a response and for the server, the message is never ended so it doesn't send a response with PrintStream. If I remove these lines : bzero(buffer,256); n = read(sockfd,buffer,255); if (n < 0) { error("ERROR reading from socket"); } printf("Message from the server : %s\n",buffer); The server knows that the message is finished but the client can't receive the response. How solve that ? Thank you

    Read the article

  • C++ Serial Port Question

    - by Pfeffer
    Problem: I have a hand held device that scans those graphic color barcodes on all packaging. There is a track device that I can use that will slide the device automatically. This track device functions by taking ascii code through a serial port. I need to get this thing to work in FileMaker on a Mac. So no terminal programs, etc... What I've got so far: I bought a Keyspan USB/Serial adapter. Using a program called ZTerm I was successful in sending commands to the device. Example: "C,7^M^J" I was also able to do the same thing in Terminal using this command: screen /dev/tty.KeySerial1 57600 and then type in the same command above(but when I typed in I just hit Control-M and Control-J for the carriage return and line feed) Now I'm writing a plug-in for FileMaker(in C++ of course). I want to get what I did above happen in C++ so when I install that plug-in in FileMaker I can just call one of those functions and have the whole process take place right there. I'm able to connect to the device, but I can't talk to it. It is not responding to anything. I've tried connecting to the device(successfully) using these: FILE *comport; if ((comport = fopen("/dev/tty.KeySerial1", "w")) == NULL){...} and int fd; fd = open("/dev/tty.KeySerial1", O_RDWR | O_NOCTTY | O_NDELAY); This is what I've tried so far in way of talking to the device: fputs ("C,7^M^J",comport); or fprintf(comport,"C,7^M^J"); or char buffer[] = { 'C' , ',' , '7' , '^' , 'M' , '^' , 'J' }; fwrite (buffer , 1 , sizeof(buffer) , comport ); or fwrite('C,7^M^J', 1, 1, comport); Questions: When I connected to the device from Terminal and using ZTerm, I was able to set my baud rate of 57600. I think that may be why it isn't responding here. But I don't know how to do it here.... Does any one know how to do that? I tried this, but it didn't work: comport->BaudRate = 57600; There are a lot of class solutions out there but they all call these include files like termios.h and stdio.h. I don't have these and, for whatever reason, I can't find them to download. I've downloaded a few examples but there are like 20 files in them and they're all calling other files I can't find(like the ones listed above). Do I need to find these and if so where? I just don't know enough about C++ Is there a website where I can download libraries?? Another solution might be to put those terminal commands in C++. Is there a way to do that? So this has been driving me crazy. I'm not a C++ guy, I only know basic programming concepts. Is anyone out there a C++ expert? I ideally I'd like this to just work using functions I already have, like those fwrite, fputs stuff. Thanks!

    Read the article

  • Strange thing on IPv6 multicast program on Windows

    - by zhanglistar
    I have written an ipv6 multicast program on windows xp sp3. But a problem bothers me a lot. The sendto function implies no error, but I can't capture the packet using wireshark. I am sure the filter is right. Thanks in advance. And the code is as follows: #include "stdafx.h" #include <stdio.h> /* for printf() and fprintf() */ #include <winsock2.h> /* for socket(), connect(), sendto(), and recvfrom() */ #include <ws2tcpip.h> /* for ip_mreq */ #include <stdlib.h> /* for atoi() and exit() */ #include <string.h> /* for memset() */ #include <time.h> /* for timestamps */ #include <pcap.h> #include <Iphlpapi.h> #pragma comment(lib, "Ws2_32.lib") #pragma comment(lib, "wpcap.lib") #pragma comment(lib, "Iphlpapi.lib") int _tmain(int argc, _TCHAR* argv[]) { int sfd; int on, length, iResult; WSADATA wsaData; struct addrinfo Hints; struct addrinfo *multicastAddr, *localAddr; char buf[46]; // Initialize Winsock iResult = WSAStartup(MAKEWORD(2, 2), &wsaData); if (iResult != 0) { printf("WSAStartup failed: %d\n", iResult); return 1; } /* Resolve destination address for multicast datagrams */ memset(&Hints, 0, sizeof (Hints)); Hints.ai_family = AF_INET6; Hints.ai_socktype = SOCK_DGRAM; Hints.ai_protocol = IPPROTO_UDP; Hints.ai_flags = AI_NUMERICHOST; iResult = getaddrinfo("FF02::1:2", "547", &Hints, &multicastAddr); if (iResult != 0) { /* error handling */ printf("socket error: %d\n", WSAGetLastError()); return -1; } /* Get a local address with the same family (IPv4 or IPv6) as our multicast group */ Hints.ai_family = multicastAddr->ai_family; Hints.ai_socktype = SOCK_DGRAM; Hints.ai_flags = AI_PASSIVE; /* Return an address we can bind to */ if ( getaddrinfo(NULL, "546", &Hints, &localAddr) != 0 ) { printf("getaddrinfo() failed: %d\n", WSAGetLastError()); exit(-1); } // Create sending socket //sfd = socket (multicastAddr->ai_family, multicastAddr->ai_socktype, multicastAddr->ai_protocol); sfd = socket(AF_INET6, SOCK_DGRAM, IPPROTO_UDP); if (sfd == -1) { printf("socket error: %d\n", WSAGetLastError()); return 0; } /* Bind to the multicast port */ if ( bind(sfd, localAddr->ai_addr, localAddr->ai_addrlen) != 0 ) { printf("bind() failed: %d\n", WSAGetLastError()); exit(-1); } if (multicastAddr->ai_family == AF_INET6 && multicastAddr->ai_addrlen == sizeof(struct sockaddr_in6)) /* IPv6 */ { on = 1; if (setsockopt (sfd, IPPROTO_IPV6, IPV6_MULTICAST_IF, (char *)&on, sizeof (on) /*(char *)&interface_addr, sizeof(interface_addr)*/) == -1) { printf("setsockopt error:%d\n", WSAGetLastError()); return -1; } if (setsockopt (sfd, IPPROTO_IPV6, IPV6_MULTICAST_LOOP, (char *)&on, sizeof (on) /*(char *)&interface_addr, sizeof(interface_addr)*/) == -1) { printf("setsockopt error:%d\n", WSAGetLastError()); return -1; } struct ipv6_mreq multicastRequest; /* Multicast address join structure */ /* Specify the multicast group */ memcpy(&multicastRequest.ipv6mr_multiaddr, &((struct sockaddr_in6*)(multicastAddr->ai_addr))->sin6_addr, sizeof(struct in6_addr)); /* Accept multicast from any interface */ multicastRequest.ipv6mr_interface = 0; /* Join the multicast address */ if ( setsockopt(sfd, IPPROTO_IPV6, IPV6_JOIN_GROUP, (char*) &multicastRequest, sizeof(multicastRequest)) != 0 ) { printf("setsockopt() failed: %d\n", WSAGetLastError()); return -1; } on = 1; if (setsockopt (sfd, IPPROTO_IPV6, IPV6_MULTICAST_IF, (char *)&on, sizeof (on)) == -1) { printf("setsockopt error:%d\n", WSAGetLastError()); return 0; } } memset(buf, 0, sizeof(buf)); strcpy(buf, "hello world"); iResult = sendto(sfd, buf, strlen(buf), 0, (LPSOCKADDR) multicastAddr->ai_addr, multicastAddr->ai_addrlen); if (iResult == SOCKET_ERROR) { printf("setsockopt error:%d\n", WSAGetLastError()); return -1; /* Error handling */ } return 0; }

    Read the article

  • problem FFmpeg avcodec_register_all iphone

    - by samantha
    Hi, I need to use ffmpeg for encodig. I have all *.a. My problem is tha when I use avcodec_register_all() xcode give me this error: "_deflate", referenced from: _encode_frame in libavcodec.a(pngenc.o) _encode_frame in libavcodec.a(pngenc.o) _encode_frame in libavcodec.a(pngenc.o) _encode_frame in libavcodec.a(lclenc.o) _encode_frame in libavcodec.a(lclenc.o) _encode_frame in libavcodec.a(zmbvenc.o) "_deflateEnd", referenced from: _flashsv_encode_end in libavcodec.a(flashsvenc.o) _encode_frame in libavcodec.a(pngenc.o) _encode_end in libavcodec.a(lclenc.o) _encode_end in libavcodec.a(zmbvenc.o) "_compress", referenced from: _encode_strip in libavcodec.a(tiffenc.o) (maybe you meant: _mp3_header_compress_bsf$non_lazy_ptr, _mp3_header_compress_bsf ) "_vorbis_analysis_init", referenced from: _oggvorbis_encode_init in libavcodec.a(libvorbis.o) "_lame_set_bWriteVbrTag", referenced from: _MP3lame_encode_init in libavcodec.a(libmp3lame.o) "_lame_set_VBR", referenced from: _MP3lame_encode_init in libavcodec.a(libmp3lame.o) "_crc32", referenced from: _png_write_chunk in libavcodec.a(pngenc.o) _png_write_chunk in libavcodec.a(pngenc.o) _png_write_chunk in libavcodec.a(pngenc.o) "_x264_encoder_headers", referenced from: _X264_init in libavcodec.a(libx264.o) "_lame_encode_buffer", referenced from: _MP3lame_encode_frame in libavcodec.a(libmp3lame.o) "_x264_encoder_encode", referenced from: _X264_frame in libavcodec.a(libx264.o) "_vorbis_comment_add_tag", referenced from: _oggvorbis_encode_init in libavcodec.a(libvorbis.o) "_theora_encode_tables", referenced from: _encode_init in libavcodec.a(libtheoraenc.o) "_vorbis_block_init", referenced from: _oggvorbis_encode_init in libavcodec.a(libvorbis.o) "_x264_nal_encode", referenced from: _X264_frame in libavcodec.a(libx264.o) _X264_init in libavcodec.a(libx264.o) "_uncompress", referenced from: _decode_frame in libavcodec.a(cscd.o) _decode_frame in libavcodec.a(dxa.o) _svq3_decode_init in libavcodec.a(h264.o) _decode_frame in libavcodec.a(tiff.o) "_xvid_plugin_2pass2", referenced from: _ff_xvid_rate_control_init in libavcodec.a(libxvid_rc.o) _ff_xvid_rate_estimate_qscale in libavcodec.a(libxvid_rc.o) _ff_xvid_rate_estimate_qscale in libavcodec.a(libxvid_rc.o) _ff_xvid_rate_control_uninit in libavcodec.a(libxvid_rc.o) _xvid_plugin_2pass2$non_lazy_ptr in libavcodec.a(libxvidff.o) (maybe you meant: _xvid_plugin_2pass2$non_lazy_ptr) "_lame_set_num_channels", referenced from: _MP3lame_encode_init in libavcodec.a(libmp3lame.o) "_lame_set_VBR_q", referenced from: _MP3lame_encode_init in libavcodec.a(libmp3lame.o) "_vorbis_analysis_buffer", referenced from: _oggvorbis_encode_frame in libavcodec.a(libvorbis.o) "_compress2", referenced from: _flashsv_encode_frame in libavcodec.a(flashsvenc.o) "_inflateEnd", referenced from: _decode_frame in libavcodec.a(pngdec.o) _flashsv_decode_end in libavcodec.a(flashsv.o) _decode_end in libavcodec.a(lcldec.o) _decode_end in libavcodec.a(tscc.o) _decode_end in libavcodec.a(zmbv.o) "_lame_encode_buffer_interleaved", referenced from: _MP3lame_encode_frame in libavcodec.a(libmp3lame.o) "_theora_comment_clear", referenced from: _encode_init in libavcodec.a(libtheoraenc.o) "_x264_encoder_close", referenced from: _X264_close in libavcodec.a(libx264.o) "_inflate", referenced from: _decode_frame in libavcodec.a(pngdec.o) _flashsv_decode_frame in libavcodec.a(flashsv.o) _flashsv_decode_frame in libavcodec.a(flashsv.o) _decode_frame in libavcodec.a(lcldec.o) _decode_frame in libavcodec.a(lcldec.o) _decode_frame in libavcodec.a(lcldec.o) _decode_frame in libavcodec.a(tscc.o) _decode_frame in libavcodec.a(zmbv.o) "_theora_comment_init", referenced from: _encode_init in libavcodec.a(libtheoraenc.o) "_vorbis_info_init", referenced from: _oggvorbis_encode_init in libavcodec.a(libvorbis.o) "deflateInit2", referenced from: _encode_frame in libavcodec.a(pngenc.o) "_deflateReset", referenced from: _encode_frame in libavcodec.a(lclenc.o) _encode_frame in libavcodec.a(zmbvenc.o) "_theora_encode_init", referenced from: _encode_init in libavcodec.a(libtheoraenc.o) "_lame_get_framesize", referenced from: _MP3lame_encode_init in libavcodec.a(libmp3lame.o) "_vorbis_analysis", referenced from: _oggvorbis_encode_frame in libavcodec.a(libvorbis.o) "_inflateReset", referenced from: _flashsv_decode_frame in libavcodec.a(flashsv.o) _decode_frame in libavcodec.a(lcldec.o) _decode_frame in libavcodec.a(lcldec.o) _decode_frame in libavcodec.a(tscc.o) _decode_frame in libavcodec.a(zmbv.o) "_lame_set_disable_reservoir", referenced from: _MP3lame_encode_init in libavcodec.a(libmp3lame.o) "_inflateSync", referenced from: _flashsv_decode_frame in libavcodec.a(flashsv.o) "_vorbis_info_clear", referenced from: _oggvorbis_encode_close in libavcodec.a(libvorbis.o) "_theora_encode_header", referenced from: _encode_init in libavcodec.a(libtheoraenc.o) "_theora_clear", referenced from: _encode_close in libavcodec.a(libtheoraenc.o) "_theora_info_clear", referenced from: _encode_init in libavcodec.a(libtheoraenc.o) "_xvid_plugin_lumimasking", referenced from: _xvid_plugin_lumimasking$non_lazy_ptr in libavcodec.a(libxvidff.o) (maybe you meant: _xvid_plugin_lumimasking$non_lazy_ptr) "_theora_encode_comment", referenced from: _encode_init in libavcodec.a(libtheoraenc.o) "_lame_set_brate", referenced from: _MP3lame_encode_init in libavcodec.a(libmp3lame.o) _MP3lame_encode_init in libavcodec.a(libmp3lame.o) "_theora_encode_YUVin", referenced from: _encode_frame in libavcodec.a(libtheoraenc.o) "_lame_init", referenced from: _MP3lame_encode_init in libavcodec.a(libmp3lame.o) "_lame_set_mode", referenced from: _MP3lame_encode_init in libavcodec.a(libmp3lame.o) "deflateInit", referenced from: _encode_init in libavcodec.a(lclenc.o) _encode_init in libavcodec.a(zmbvenc.o) "_vorbis_encode_setup_managed", referenced from: _oggvorbis_encode_init in libavcodec.a(libvorbis.o) "_lame_set_quality", referenced from: _MP3lame_encode_init in libavcodec.a(libmp3lame.o) _MP3lame_encode_init in libavcodec.a(libmp3lame.o) "_vorbis_analysis_blockout", referenced from: _oggvorbis_encode_frame in libavcodec.a(libvorbis.o) _oggvorbis_encode_frame in libavcodec.a(libvorbis.o) "_vorbis_analysis_wrote", referenced from: _oggvorbis_encode_frame in libavcodec.a(libvorbis.o) _oggvorbis_encode_frame in libavcodec.a(libvorbis.o) _oggvorbis_encode_close in libavcodec.a(libvorbis.o) "inflateInit", referenced from: _decode_frame in libavcodec.a(pngdec.o) _flashsv_decode_init in libavcodec.a(flashsv.o) _decode_init in libavcodec.a(lcldec.o) _decode_init in libavcodec.a(tscc.o) _decode_init in libavcodec.a(zmbv.o) "_vorbis_comment_clear", referenced from: _oggvorbis_encode_init in libavcodec.a(libvorbis.o) "_vorbis_bitrate_addblock", referenced from: _oggvorbis_encode_frame in libavcodec.a(libvorbis.o) "_lame_set_in_samplerate", referenced from: _MP3lame_encode_init in libavcodec.a(libmp3lame.o) "_vorbis_encode_ctl", referenced from: _oggvorbis_encode_init in libavcodec.a(libvorbis.o) "_x264_param_default", referenced from: _X264_init in libavcodec.a(libx264.o) "_theora_info_init", referenced from: _encode_init in libavcodec.a(libtheoraenc.o) "_vorbis_encode_setup_init", referenced from: _oggvorbis_encode_init in libavcodec.a(libvorbis.o) "_vorbis_comment_init", referenced from: _oggvorbis_encode_init in libavcodec.a(libvorbis.o) "_vorbis_bitrate_flushpacket", referenced from: _oggvorbis_encode_frame in libavcodec.a(libvorbis.o) _oggvorbis_encode_frame in libavcodec.a(libvorbis.o) "_xvid_plugin_single", referenced from: _xvid_plugin_single$non_lazy_ptr in libavcodec.a(libxvidff.o) (maybe you meant: _xvid_plugin_single$non_lazy_ptr) "_xvid_global", referenced from: _ff_xvid_encode_init in libavcodec.a(libxvidff.o) "_xvid_encore", referenced from: _ff_xvid_encode_close in libavcodec.a(libxvidff.o) _ff_xvid_encode_init in libavcodec.a(libxvidff.o) _ff_xvid_encode_frame in libavcodec.a(libxvidff.o) "_vorbis_encode_setup_vbr", referenced from: _oggvorbis_encode_init in libavcodec.a(libvorbis.o) "_lame_set_out_samplerate", referenced from: _MP3lame_encode_init in libavcodec.a(libmp3lame.o) "_lame_init_params", referenced from: _MP3lame_encode_init in libavcodec.a(libmp3lame.o) "_vorbis_block_clear", referenced from: _oggvorbis_encode_close in libavcodec.a(libvorbis.o) "_lame_encode_flush", referenced from: _MP3lame_encode_frame in libavcodec.a(libmp3lame.o) "_x264_encoder_open", referenced from: _X264_init in libavcodec.a(libx264.o) "_lame_close", referenced from: _MP3lame_encode_init in libavcodec.a(libmp3lame.o) _MP3lame_encode_close in libavcodec.a(libmp3lame.o) "_vorbis_dsp_clear", referenced from: _oggvorbis_encode_close in libavcodec.a(libvorbis.o) "_vorbis_analysis_headerout", referenced from: _oggvorbis_encode_init in libavcodec.a(libvorbis.o) "_theora_encode_packetout", referenced from: _encode_frame in libavcodec.a(libtheoraenc.o) _encode_close in libavcodec.a(libtheoraenc.o) ld: symbol(s) not found collect2: ld returned 1 exit status Also whene i use [code] codec = avcodec_find_encoder(CODEC_ID_H264); //CODEC_ID_H264 //codec = avcodec_find_encoder_by_name("mpeg1"); if (!codec) { fprintf(stderr, "codec not found\n"); exit(1); }[/code] codec is always null where is my error? best regards

    Read the article

  • Strange things appear on running the program

    - by FILIaS
    Hey! I'm fixing a program but I'm facing a problem and I cant really realize what's the wrong on the code. I would appreciate any help. I didnt post all the code...but i think with this part you can get an idea of it. With the following function enter() I wanna add user commands' datas to a list. eg. user give the command: "enter james bond 007 gun" 'james' is supposed to be the name, 'bond' the surname, 007 the amount and the rest is the description. I use strtok in order to 'cut' the command,then i put each name on a temp array. Then i call InsertSort in order to put the datas on a linked list but in alphabetical order depending on the surname that users give. I wanna keep the list on order and put each time the elements on the right position. /* struct for all the datas that user enters on file*/ typedef struct catalog { char short_name[50]; char surname[50]; signed int amount; char description[1000]; struct catalog *next; }catalog,*catalogPointer; catalogPointer current; catalogPointer head = NULL; void enter(void)//user command: enter <name> <surname> <amount> <description> { int n,j=2,k=0; char temp[1500]; char command[1500]; while (command[j]!=' ' && command[j]!='\0') { temp[k]=command[j]; j++; k++; } temp[k]='\0'; char *curToken = strtok(temp," "); printf("temp is:%s \n",temp); char short_name[50],surname[50],description[1000]; signed int amount; //short_name=(char *)malloc(sizeof (char *)); //surname=(char *)malloc(sizeof (char *)); //description=(char *)malloc(sizeof (char *)); //amount=(int *)malloc(sizeof (int *)); printf("\nWhat you entered for saving:\n"); for (n = 0; curToken !='\0'; ++n) { if (curToken) { strncpy(short_name, curToken, sizeof (char *)); / } printf("Short Name: %s \n",short_name); curToken = strtok(NULL," "); if (curToken) strncpy(surname, curToken, sizeof (char *)); / printf("SurName: %s \n",surname); curToken = strtok(NULL," "); if (curToken) { char *chk; amount = (int) strtol(curToken, &chk, 10); if (!isspace(*chk) && *chk != 0) fprintf(stderr,"Warning: expected integer value for amount, received %s instead\n",curToken); } printf("Amount: %d \n",amount); curToken = strtok(NULL,"\0"); if (curToken) { strncpy(description, curToken, sizeof (char *)); } printf("Description: %s \n",description); break; } if (findEntryExists(head, surname) != NULL) printf("\nAn entry for <%s %s> is already in the catalog!\nNew entry not entered.\n",short_name,surname); else { printf("\nTry to entry <%s %s %d %s> in the catalog list!\n",short_name,surname,amount,description); InsertSort(&head,short_name, surname, amount, description); printf("\n**Entry done!**\n"); } // Maintain the list in alphabetical order by surname. } /********Uses special case code for the head end********/ void SortedInsert(catalog** headRef, catalogPointer newNode,char short_name[],char surname[],signed int amount,char description[]) { strcpy(newNode->short_name, short_name); strcpy(newNode->surname, surname); newNode->amount=amount; strcpy(newNode->description, description); // Special case for the head end if (*headRef == NULL||(*headRef)->surname >= newNode->surname) { newNode->next = *headRef; *headRef = newNode; } else { // Locate the node before the point of insertion catalogPointer current = *headRef; catalogPointer temp=current->next; while ( temp!=NULL ) { if(strcmp(temp->surname,newNode->surname)<0 ) current = temp; } newNode->next = temp; temp = newNode; } } // Given a list, change it to be in sorted order (using SortedInsert()). void InsertSort(catalog** headRef,char short_name[],char surname[],signed int amount,char description[]) { catalogPointer result = NULL; // build the answer here catalogPointer current = *headRef; // iterate over the original list catalogPointer next; while (current!=NULL) { next = current->next; // tricky - note the next pointer before we change it SortedInsert(&result,current,short_name,surname,amount,description); current = next; } *headRef = result; } Running the program I get these strange things (garbage?)... Choose your selection: enter james bond 007 gun Your command is: enter james bond 007 gun temp is:james What you entered for saving: Short Name: james SurName: Amount: 0 Description: 0T?? Try to entry james 0 0T?? in the catalog list! Entry done! Also I'm facing a problem on how to use the 'malloc' on this program. Thanks in advance. . .

    Read the article

  • C -Segmentation fault !

    - by FILIaS
    It seems at least weird to me... The program runs normally.But after I call the enter() function for the 4th time,there is a segmentation fault!I would appreciate any help. With the following function enter() I wanna add user commands' datas to a list. [Some part of the code is already posted on another question of me, but I think I should post it again...as it's a different problem I'm facing now.] /* struct for all the datas that user enters on file*/ typedef struct catalog { char short_name[50]; char surname[50]; signed int amount; char description[1000]; struct catalog *next; }catalog,*catalogPointer; catalogPointer current; catalogPointer head = NULL; void enter(void) //user command: i <name> <surname> <amount> <description> { int n,j=2,k=0; char temp[1500]; char *short_name,*surname,*description; signed int amount; char* params = strchr(command,' ') + 1; //strchr returns a pointer to the 1st space on the command.U want a pointer to the char right after that space. strcpy(temp, params); //params is saved as temp. char *curToken = strtok(temp," "); //strtok cuts 'temp' into strings between the spaces and saves them to 'curToken' printf("temp is:%s \n",temp); printf("\nWhat you entered for saving:\n"); for (n = 0; curToken; ++n) //until curToken ends: { if (curToken) { short_name = malloc(strlen(curToken) + 1); strncpy(short_name, curToken, sizeof (short_name)); } printf("Short Name: %s \n",short_name); curToken = strtok(NULL," "); if (curToken) { surname = malloc(strlen(curToken) + 1); strncpy(surname, curToken,sizeof (surname)); } printf("SurName: %s \n",surname); curToken = strtok(NULL," "); if (curToken) { //int * amount= malloc(sizeof (signed int *)); char *chk; amount = (int) strtol(curToken, &chk, 10); if (!isspace(*chk) && *chk != 0) fprintf(stderr,"Warning: expected integer value for amount, received %s instead\n",curToken); } printf("Amount: %d \n",amount); curToken = strtok(NULL,"\0"); if (curToken) { description = malloc(strlen(curToken) + 1); strncpy(description, curToken, sizeof (description)); } printf("Description: %s \n",description); break; } if (findEntryExists(head, surname,short_name) != NULL) //call function in order to see if entry exists already on the catalog printf("\nAn entry for <%s %s> is already in the catalog!\nNew entry not entered.\n",short_name,surname); else { printf("\nTry to entry <%s %s %d %s> in the catalog list!\n",short_name,surname,amount,description); newEntry(&head,short_name,surname,amount,description); printf("\n**Entry done!**\n"); } // Maintain the list in alphabetical order by surname. } catalogPointer findEntryExists (catalogPointer head, char num[],char first[]) { catalogPointer p = head; while (p != NULL && strcmp(p->surname, num) != 0 && strcmp(p->short_name,first) != 0) { p = p->next; } return p; } catalogPointer newEntry (catalog** headRef,char short_name[], char surname[], signed int amount, char description[]) { catalogPointer newNode = (catalogPointer)malloc(sizeof(catalog)); catalogPointer first; catalogPointer second; catalogPointer tmp; first=head; second=NULL; strcpy(newNode->short_name, short_name); strcpy(newNode->surname, surname); newNode->amount=amount; strcpy(newNode->description, description); while (first!=NULL) { if (strcmp(surname,first->surname)>0) second=first; else if (strcmp(surname,first->surname)==0) { if (strcmp(short_name,first->short_name)>0) second=first; } first=first->next; } if (second==NULL) { newNode->next=head; head=newNode; } else //SEGMENTATION APPEARS WHEN IT GETS HERE! { tmp=second->next; newNode->next=tmp; first->next=newNode; } } UPDATE: SegFault appears only when it gets on the 'else' loop of InsertSort() function. I observed that segmentation fault appears when i try to put on the list names that are after it. For example, if in the list exists: [Name:b Surname:b Amount:6 Description:b] [Name:c Surname:c Amount:5 Description:c] [Name:d Surname:d Amount:4 Description:d] [Name:e Surname:e Amount:3 Description:e] [Name:g Surname:g Amount:2 Description:g] [Name:x Surname:x Amount:1 Description:x] and i put: " x z 77 gege" there is a segmentation but if i put "x a 77 gege" it continues normally....

    Read the article

  • Array subscript is not an integer

    - by Dimitri
    Hello folks, following this previous question Malloc Memory Corruption in C, now i have another problem. I have the same code. Now I am trying to multiply the values contained in the arrays A * vc and store in res. Then A is set to zero and i do a second multiplication with res and vc and i store the values in A. (A and Q are square matrices and mc and vc are N lines two columns matrices or arrays). Here is my code : int jacobi_gpu(double A[], double Q[], double tol, long int dim){ int nrot, p, q, k, tid; double c, s; double *mc, *vc, *res; int i,kc; double vc1, vc2; mc = (double *)malloc(2 * dim * sizeof(double)); vc = (double *)malloc(2 * dim * sizeof(double)); vc = (double *)malloc(dim * dim * sizeof(double)); if( mc == NULL || vc == NULL){ fprintf(stderr, "pb allocation matricre\n"); exit(1); } nrot = 0; for(k = 0; k < dim - 1; k++){ eye(mc, dim); eye(vc, dim); for(tid = 0; tid < floor(dim /2); tid++){ p = (tid + k)%(dim - 1); if(tid != 0) q = (dim - tid + k - 1)%(dim - 1); else q = dim - 1; printf("p = %d | q = %d\n", p, q); if(fabs(A[p + q*dim]) > tol){ nrot++; symschur2(A, dim, p, q, &c, &s); mc[2*tid] = p; vc[2 * tid] = c; mc[2*tid + 1] = q; vc[2*tid + 1] = -s; mc[2*tid + 2*(dim - 2*tid) - 2] = p; vc[2*tid + 2*(dim - 2*tid) - 2 ] = s; mc[2*tid + 2*(dim - 2*tid) - 1] = q; vc[2 * tid + 2*(dim - 2*tid) - 1 ] = c; } } for( i = 0; i< dim; i++){ for(kc=0; kc < dim; kc++){ if( kc < floor(dim/2)) { vc1 = vc[2*kc + i*dim]; vc2 = vc[2*kc + 2*(dim - 2*kc) - 2]; }else { vc1 = vc[2*kc+1 + i*dim]; vc2 = vc[2*kc - 2*(dim - 2*kc) - 1]; } res[kc + i*dim] = A[mc[2*kc] + i*dim]*vc1 + A[mc[2*kc + 1] + i*dim]*vc2; } } zero(A, dim); for( i = 0; i< dim; i++){ for(kc=0; kc < dim; k++){ if( k < floor(dim/2)){ vc1 = vc[2*kc + i*dim]; vc2 = vc[2*kc + 2*(dim - 2*kc) - 2]; }else { vc1 = vc[2*kc+1 + i*dim]; vc2 = vc[2*kc - 2*(dim - 2*kc) - 1]; } A[kc + i*dim] = res[mc[2*kc] + i*dim]*vc1 + res[mc[2*kc + 1] + i*dim]*vc2; } } affiche(mc,dim,2,"Matrice creuse"); affiche(vc,dim,2,"Valeur creuse"); } free(mc); free(vc); free(res); return nrot; } When i try to compile, i have this error : jacobi_gpu.c: In function ‘jacobi_gpu’: jacobi_gpu.c:103: error: array subscript is not an integer jacobi_gpu.c:103: error: array subscript is not an integer jacobi_gpu.c:118: error: array subscript is not an integer jacobi_gpu.c:118: error: array subscript is not an integer make: *** [jacobi_gpu.o] Erreur 1 The corresponding lines are where I store the results in res and A : res[kc + i*dim] = A[mc[2*kc] + i*dim]*vc1 + A[mc[2*kc + 1] + i*dim]*vc2; and A[kc + i*dim] = res[mc[2*kc] + i*dim]*vc1 + res[mc[2*kc + 1] + i*dim]*vc2; Can someone explain me what is this error and how can i correct it? Thanks for your help. ;)

    Read the article

  • C -Segmentation fault after the 4th call of the function!

    - by FILIaS
    It seems at least weird to me... The program runs normally.But after I call the enter() function for the 4th time,there is a segmentation fault!I would appreciate any help. With the following function enter() I wanna add user commands' datas to a list. [Some part of the code is already posted on another question of me, but I think I should post it again...as it's a different problem I'm facing now.] /* struct for all the datas that user enters on file*/ typedef struct catalog { char short_name[50]; char surname[50]; signed int amount; char description[1000]; struct catalog *next; }catalog,*catalogPointer; catalogPointer current; catalogPointer head = NULL; void enter(void) //user command: i <name> <surname> <amount> <description> { int n,j=2,k=0; char temp[1500]; char *short_name,*surname,*description; signed int amount; char* params = strchr(command,' ') + 1; //strchr returns a pointer to the 1st space on the command.U want a pointer to the char right after that space. strcpy(temp, params); //params is saved as temp. char *curToken = strtok(temp," "); //strtok cuts 'temp' into strings between the spaces and saves them to 'curToken' printf("temp is:%s \n",temp); printf("\nWhat you entered for saving:\n"); for (n = 0; curToken; ++n) //until curToken ends: { if (curToken) { short_name = malloc(strlen(curToken) + 1); strncpy(short_name, curToken, sizeof (short_name)); } printf("Short Name: %s \n",short_name); curToken = strtok(NULL," "); if (curToken) { surname = malloc(strlen(curToken) + 1); strncpy(surname, curToken,sizeof (surname)); } printf("SurName: %s \n",surname); curToken = strtok(NULL," "); if (curToken) { //int * amount= malloc(sizeof (signed int *)); char *chk; amount = (int) strtol(curToken, &chk, 10); if (!isspace(*chk) && *chk != 0) fprintf(stderr,"Warning: expected integer value for amount, received %s instead\n",curToken); } printf("Amount: %d \n",amount); curToken = strtok(NULL,"\0"); if (curToken) { description = malloc(strlen(curToken) + 1); strncpy(description, curToken, sizeof (description)); } printf("Description: %s \n",description); break; } if (findEntryExists(head, surname,short_name) != NULL) //call function in order to see if entry exists already on the catalog printf("\nAn entry for <%s %s> is already in the catalog!\nNew entry not entered.\n",short_name,surname); else { printf("\nTry to entry <%s %s %d %s> in the catalog list!\n",short_name,surname,amount,description); newEntry(&head,short_name,surname,amount,description); printf("\n**Entry done!**\n"); } // Maintain the list in alphabetical order by surname. } catalogPointer findEntryExists (catalogPointer head, char num[],char first[]) { catalogPointer p = head; while (p != NULL && strcmp(p->surname, num) != 0 && strcmp(p->short_name,first) != 0) { p = p->next; } return p; } catalogPointer newEntry (catalog** headRef,char short_name[], char surname[], signed int amount, char description[]) { catalogPointer newNode = (catalogPointer)malloc(sizeof(catalog)); catalogPointer first; catalogPointer second; catalogPointer tmp; first=head; second=NULL; strcpy(newNode->short_name, short_name); strcpy(newNode->surname, surname); newNode->amount=amount; strcpy(newNode->description, description); //SEGMENTATION ON THE 4TH RUN OF PROGRAM STOPS HERE depending on the names each time it gets! while (first!=NULL) { if (strcmp(surname,first->surname)>0) second=first; else if (strcmp(surname,first->surname)==0) { if (strcmp(short_name,first->short_name)>0) second=first; } first=first->next; } if (second==NULL) { newNode->next=head; head=newNode; } else { tmp=second->next; newNode->next=tmp; first->next=newNode; } }

    Read the article

  • Linux C: "Interactive session" with separate read and write named pipes?

    - by ~sd-imi
    Hi all, I am trying to work with "Introduction to Interprocess Communication Using Named Pipes - Full-Duplex Communication Using Named Pipes", http://developers.sun.com/solaris/articles/named_pipes.html#5 ; in particular fd_server.c (included below for reference) Here is my info and compile line: :~$ cat /etc/issue Ubuntu 10.04 LTS \n \l :~$ gcc --version gcc (Ubuntu 4.4.3-4ubuntu5) 4.4.3 :~$ gcc fd_server.c -o fd_server fd_server.c creates two named pipes, one for reading and one for writing. What one can do, is: in one terminal, run the server and read (through cat) its write pipe: :~$ ./fd_server & 2/dev/null [1] 11354 :~$ cat /tmp/np2 and in another, write (using echo) to server's read pipe: :~$ echo "heeellloooo" /tmp/np1 going back to first terminal, one can see: :~$ cat /tmp/np2 HEEELLLOOOO 0[1]+ Exit 13 ./fd_server 2 /dev/null What I would like to do, is make sort of a "interactive" (or "shell"-like) session; that is, the server is run as usual, but instead of running "cat" and "echo", I'd like to use something akin to screen. What I mean by that, is that screen can be called like screen /dev/ttyS0 38400, and then it makes a sort of a interactive session, where what is typed in terminal is passed to /dev/ttyS0, and its response is written to terminal. Now, of course, I cannot use screen, because in my case the program has two separate nodes, and as far as I can tell, screen can refer to only one. How would one go about to achieve this sort of "interactive" session in this context (with two separate read/write pipes)? Thanks, Cheers! Code below: #include <stdio.h> #include <errno.h> #include <ctype.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> //#include <fullduplex.h> /* For name of the named-pipe */ #define NP1 "/tmp/np1" #define NP2 "/tmp/np2" #define MAX_BUF_SIZE 255 #include <stdlib.h> //exit #include <string.h> //strlen int main(int argc, char *argv[]) { int rdfd, wrfd, ret_val, count, numread; char buf[MAX_BUF_SIZE]; /* Create the first named - pipe */ ret_val = mkfifo(NP1, 0666); if ((ret_val == -1) && (errno != EEXIST)) { perror("Error creating the named pipe"); exit (1); } ret_val = mkfifo(NP2, 0666); if ((ret_val == -1) && (errno != EEXIST)) { perror("Error creating the named pipe"); exit (1); } /* Open the first named pipe for reading */ rdfd = open(NP1, O_RDONLY); /* Open the second named pipe for writing */ wrfd = open(NP2, O_WRONLY); /* Read from the first pipe */ numread = read(rdfd, buf, MAX_BUF_SIZE); buf[numread] = '0'; fprintf(stderr, "Full Duplex Server : Read From the pipe : %sn", buf); /* Convert to the string to upper case */ count = 0; while (count < numread) { buf[count] = toupper(buf[count]); count++; } /* * Write the converted string back to the second * pipe */ write(wrfd, buf, strlen(buf)); } Edit: Right, just to clarify - it seems I found a document discussing something very similar, it is http://en.wikibooks.org/wiki/Serial_Programming/Serial_Linux#Configuration_with_stty - a modification of the script there ("For example, the following script configures the device and starts a background process for copying all received data from the serial device to standard output...") for the above program is below: # stty raw # ( ./fd_server 2>/dev/null; )& bgPidS=$! ( cat < /tmp/np2 ; )& bgPid=$! # Read commands from user, send them to device echo $(kill -0 $bgPidS 2>/dev/null ; echo $?) while [ "$(kill -0 $bgPidS 2>/dev/null ; echo $?)" -eq "0" ] && read cmd; do # redirect debug msgs to stderr, as here we're redirected to /tmp/np1 echo "$? - $bgPidS - $bgPid" >&2 echo "$cmd" echo -e "\nproc: $(kill -0 $bgPidS 2>/dev/null ; echo $?)" >&2 done >/tmp/np1 echo OUT # Terminate background read process - if they still exist if [ "$(kill -0 $bgPid 2>/dev/null ; echo $?)" -eq "0" ] ; then kill $bgPid fi if [ "$(kill -0 $bgPidS 2>/dev/null ; echo $?)" -eq "0" ] ; then kill $bgPidS fi # stty cooked So, saving the script as say starter.sh and calling it, results with the following session: $ ./starter.sh 0 i'm typing here and pressing [enter] at end 0 - 13496 - 13497 I'M TYPING HERE AND PRESSING [ENTER] AT END 0~?.N=?(?~? ?????}????@??????~? [garble] proc: 0 OUT which is what I'd call for "interactive session" (ignoring the debug statements) - server waits for me to enter a command; it gives its output after it receives a command (and as in this case it exits after first command, so does the starter script as well). Except that, I'd like to not have buffered input, but sent character by character (meaning the above session should exit after first key press, and print out a single letter only - which is what I expected stty raw would help with, but it doesn't: it just kills reaction to both Enter and Ctrl-C :) ) I was just wandering if there already is an existing command (akin to screen in respect to serial devices, I guess) that would accept two such named pipes as arguments, and establish a "terminal" or "shell" like session through them; or would I have to use scripts as above and/or program own 'client' that will behave as a terminal..

    Read the article

  • cannot delete from doubly linked list using visual studios in C

    - by Jesus Sanchez
    hello I am currently doing an assignment that is supposed to read in a file, use the information, and then print out another file. all using doubly linked list. Currently i am trying to just read in the file into a doubly linked list, print it out onto the screen and a file, and finally delete the list and close the program. The program works fine as long as I don't call the dlist_distroy function which is supposed to delete the string. as soon as I do it the program starts running and then a window pops up saying "Windows has triggered a breakpoint in tempfilter.exe. This may be due to a corruption of the heap, which indicates a bug in tempfilter.exe or any of the DLLs it has loaded. This may also be due to the user pressing F12 while tempfilter.exe has focus. The output window may have more diagnostic information." I have revised the destroy and remove functions and cant understand the problem. my program is the following main.c #include <stdlib.h> #include <stdio.h> #include <string.h> #include "dlinklist.h" #include "DlistElmt.h" #include "Dlist.h" #include "dlistdata.h" /**************************************************************************************************/ int main ( int argc, char *argv[] ) { FILE *ifp, *ofp; int hour, min; Dlist *list; DlistElmt *current=NULL, *element; float temp; list = (Dlist *)malloc(sizeof(list)); element = (DlistElmt *)malloc(sizeof(element)); if ( argc != 3 ) /* argc should be 3 for correct execution */ { /* We print argv[0] assuming it is the program name */ /* TODO: This is wrong, it should be: usage: %s inputfile outputfile */ printf( "usage: %s filename", argv[0] ); } else { // We assume argv[1] is a filename to open ifp = fopen( argv[1], "r" ); if (ifp == 0 ){ printf("Could not open file\n"); } else{ ofp = fopen(argv[2], "w"); dlist_init(list);//, (destroy)(hour, min, temp)); while (fscanf(ifp, "%d:%d %f ", &hour, &min, &temp) == 3) { current=list->tail; if(dlist_size(list)==0){ dlist_ins_prev(list, current, hour, min, temp); } else{ dlist_ins_next(list, current, hour, min, temp); } } current = list->head; while(current != NULL){ if(current==list->head){ current=current->next; } else if((current->temp > (current->prev->temp +5)) || (current->temp < (current->prev->temp -5))){ dlist_remove(list, current); current=current->next; } else current=current->next; } current = list->head; while(current != NULL){ printf("%d:%d %2.1lf\n" ,current->time, current->time2, current->temp ); fprintf(ofp, "%d:%d %2.1lf\n", current->time, current->time2, current->temp ); current = current->next; } //dlist_destroy(list); //} fclose(ifp); fclose(ofp); } } getchar(); } dlistdata.c #include <stdlib.h> #include <stdio.h> #include <string.h> #include "dlinklist.h" #include "DlistElmt.h" #include "dlistdata.h" /**************************************************************************************************/ void dlist_init(Dlist *list){ list->size = 0; list->head = NULL; list->tail = NULL; return; } void dlist_destroy(Dlist *list){ while (dlist_size(list) > 0){ dlist_remove(list, list->head); } memset(list, 0, sizeof(Dlist)); return; } int dlist_ins_next(Dlist *list, DlistElmt *element, const int time, const int time2, const float temp){ DlistElmt *new_element; if (element == NULL && dlist_size(list) != 0) return -1; if ((new_element = (DlistElmt *)malloc(sizeof(new_element))) == NULL) return -1; new_element->time = (int )time; new_element->time2 = (int )time2; new_element->temp = (float )temp; if (dlist_size(list) == 0) { list->head = new_element; list->head->prev = NULL; list->head->next = NULL; list->tail = new_element; } else { new_element->next = element->next; new_element->prev = element; if(element->next == NULL) list->tail = new_element; else element->next->prev = new_element; element->next = new_element; } list->size++; return 0; } int dlist_ins_prev(Dlist *list, DlistElmt *element, const int time, const int time2, const float temp){ DlistElmt *new_element; if (element == NULL && dlist_size(list) != 0) return -1; if ((new_element = (DlistElmt *)malloc(sizeof(new_element))) == NULL) return -1; new_element->time = (int )time; new_element->time2 = (int )time2; new_element->temp = (float )temp; if (dlist_size(list) == 0){ list->head = new_element; list->head->prev = NULL; list->head->next=NULL; list->tail = new_element; } else{ new_element->next = element; new_element->prev = element->prev; if(element->prev ==NULL) list->head = new_element; else element->prev->next = new_element; element->prev = new_element; } list->size++; return 0; } int dlist_remove(Dlist *list, DlistElmt *element){//, int time, int time2, float temp){ if (element == NULL || dlist_size(list) == 0) return -1; if (element == list->head) { list->head = element->next; if (list->head == NULL) list->tail = NULL; else element->next->prev = NULL; } else{ element->prev->next = element->next; if (element->next = NULL) list->tail = element->prev; else element->next->prev = element->prev; } free(element); list->size--; return 0; }

    Read the article

  • Why is phpseclib producing incompatible certs?

    - by chacham15
    Why is it that when I try to use a certificate/key pair generated from phpseclib, the OpenSSL server code errors out? Certs/Keys generated from OpenSSL work fine. How do I fix this? Certificate/Key Generation taken straight from phpseclib documentation: <?php include('File/X509.php'); include('Crypt/RSA.php'); // create private key / x.509 cert for stunnel / website $privKey = new Crypt_RSA(); extract($privKey-createKey()); $privKey-loadKey($privatekey); $pubKey = new Crypt_RSA(); $pubKey-loadKey($publickey); $pubKey-setPublicKey(); $subject = new File_X509(); $subject-setDNProp('id-at-organizationName', 'phpseclib demo cert'); //$subject-removeDNProp('id-at-organizationName'); $subject-setPublicKey($pubKey); $issuer = new File_X509(); $issuer-setPrivateKey($privKey); $issuer-setDN($subject-getDN()); $x509 = new File_X509(); //$x509-setStartDate('-1 month'); // default: now //$x509-setEndDate('+1 year'); // default: +1 year $result = $x509-sign($issuer, $subject); echo "the stunnel.pem contents are as follows:\r\n\r\n"; echo $privKey-getPrivateKey(); echo "\r\n"; echo $x509-saveX509($result); echo "\r\n"; ? OpenSSL sample SSL server taken straight from OpenSSL example code: #include <stdio.h #include <unistd.h #include <stdlib.h #include <memory.h #include <errno.h #include <sys/types.h #include <sys/socket.h #include <netinet/in.h #include <arpa/inet.h #include <netdb.h #include <openssl/rsa.h /* SSLeay stuff */ #include <openssl/crypto.h #include <openssl/x509.h #include <openssl/pem.h #include <openssl/ssl.h #include <openssl/err.h #define CHK_NULL(x) if ((x)==NULL) exit (1) #define CHK_ERR(err,s) if ((err)==-1) { perror(s); exit(1); } #define CHK_SSL(err) if ((err)==-1) { ERR_print_errors_fp(stderr); exit(2); } int main (int argc, char *argv[]) { int err; int listen_sd; int sd; struct sockaddr_in sa_serv; struct sockaddr_in sa_cli; size_t client_len; SSL_CTX* ctx; SSL* ssl; X509* client_cert; char* str; char buf [4096]; SSL_METHOD *meth; /* SSL preliminaries. We keep the certificate and key with the context. */ SSL_load_error_strings(); SSLeay_add_ssl_algorithms(); meth = SSLv23_server_method(); ctx = SSL_CTX_new (meth); if (!ctx) { ERR_print_errors_fp(stderr); exit(2); } if (SSL_CTX_use_certificate_file(ctx, argv[1], SSL_FILETYPE_PEM) <= 0) { ERR_print_errors_fp(stderr); exit(3); } if (SSL_CTX_use_PrivateKey_file(ctx, argv[2], SSL_FILETYPE_PEM) <= 0) { ERR_print_errors_fp(stderr); exit(4); } if (!SSL_CTX_check_private_key(ctx)) { fprintf(stderr,"Private key does not match the certificate public key\n"); exit(5); } /* ----------------------------------------------- */ /* Prepare TCP socket for receiving connections */ listen_sd = socket (AF_INET, SOCK_STREAM, 0); CHK_ERR(listen_sd, "socket"); memset (&sa_serv, '\0', sizeof(sa_serv)); sa_serv.sin_family = AF_INET; sa_serv.sin_addr.s_addr = INADDR_ANY; sa_serv.sin_port = htons (1111); /* Server Port number */ err = bind(listen_sd, (struct sockaddr*) &sa_serv, sizeof (sa_serv)); CHK_ERR(err, "bind"); /* Receive a TCP connection. */ err = listen (listen_sd, 5); CHK_ERR(err, "listen"); client_len = sizeof(sa_cli); sd = accept (listen_sd, (struct sockaddr*) &sa_cli, (unsigned int*)&client_len); CHK_ERR(sd, "accept"); close (listen_sd); printf ("Connection from %lx, port %x\n", sa_cli.sin_addr.s_addr, sa_cli.sin_port); /* ----------------------------------------------- */ /* TCP connection is ready. Do server side SSL. */ ssl = SSL_new (ctx); CHK_NULL(ssl); SSL_set_fd (ssl, sd); err = SSL_accept (ssl); CHK_SSL(err); /* Get the cipher - opt */ printf ("SSL connection using %s\n", SSL_get_cipher (ssl)); /* Get client's certificate (note: beware of dynamic allocation) - opt */ client_cert = SSL_get_peer_certificate (ssl); if (client_cert != NULL) { printf ("Client certificate:\n"); str = X509_NAME_oneline (X509_get_subject_name (client_cert), 0, 0); CHK_NULL(str); printf ("\t subject: %s\n", str); OPENSSL_free (str); str = X509_NAME_oneline (X509_get_issuer_name (client_cert), 0, 0); CHK_NULL(str); printf ("\t issuer: %s\n", str); OPENSSL_free (str); /* We could do all sorts of certificate verification stuff here before deallocating the certificate. */ X509_free (client_cert); } else printf ("Client does not have certificate.\n"); /* DATA EXCHANGE - Receive message and send reply. */ err = SSL_read (ssl, buf, sizeof(buf) - 1); CHK_SSL(err); buf[err] = '\0'; printf ("Got %d chars:'%s'\n", err, buf); err = SSL_write (ssl, "I hear you.", strlen("I hear you.")); CHK_SSL(err); /* Clean up. */ close (sd); SSL_free (ssl); SSL_CTX_free (ctx); return 1; } /* EOF - serv.cpp */ This program errors with: (the error is printed out on the call to SSL_write) Connection from 100007f, port a7ff SSL connection using (NONE) Client does not have certificate. Got 0 chars:'' 82673:error:1409E0E5:SSL routines:SSL3_WRITE_BYTES:ssl handshake failure:/SourceCache/OpenSSL098/OpenSSL098-44/src/ssl/s3_pkt.c:539: Here is the relevant code referenced by the error: int ssl3_write_bytes(SSL *s, int type, const void *buf_, int len) { const unsigned char *buf=buf_; unsigned int tot,n,nw; int i; s-rwstate=SSL_NOTHING; tot=s-s3-wnum; s-s3-wnum=0; if (SSL_in_init(s) && !s-in_handshake) { i=s-handshake_func(s); if (i < 0) return(i); if (i == 0) { SSLerr(SSL_F_SSL3_WRITE_BYTES,SSL_R_SSL_HANDSHAKE_FAILURE); return -1; } } ...etc

    Read the article

  • Valgrind says "stack allocation," I say "heap allocation"

    - by Joel J. Adamson
    Dear Friends, I am trying to trace a segfault with valgrind. I get the following message from valgrind: ==3683== Conditional jump or move depends on uninitialised value(s) ==3683== at 0x4C277C5: sparse_mat_mat_kron (sparse.c:165) ==3683== by 0x4C2706E: rec_mating (rec.c:176) ==3683== by 0x401C1C: age_dep_iterate (age_dep.c:287) ==3683== by 0x4014CB: main (age_dep.c:92) ==3683== Uninitialised value was created by a stack allocation ==3683== at 0x401848: age_dep_init_params (age_dep.c:131) ==3683== ==3683== Conditional jump or move depends on uninitialised value(s) ==3683== at 0x4C277C7: sparse_mat_mat_kron (sparse.c:165) ==3683== by 0x4C2706E: rec_mating (rec.c:176) ==3683== by 0x401C1C: age_dep_iterate (age_dep.c:287) ==3683== by 0x4014CB: main (age_dep.c:92) ==3683== Uninitialised value was created by a stack allocation ==3683== at 0x401848: age_dep_init_params (age_dep.c:131) However, here's the offending line: /* allocate mating table */ age_dep_data->mtable = malloc (age_dep_data->geno * sizeof (double *)); if (age_dep_data->mtable == NULL) error (ENOMEM, ENOMEM, nullmsg, __LINE__); for (int j = 0; j < age_dep_data->geno; j++) { 131=> age_dep_data->mtable[j] = calloc (age_dep_data->geno, sizeof (double)); if (age_dep_data->mtable[j] == NULL) error (ENOMEM, ENOMEM, nullmsg, __LINE__); } What gives? I thought any call to malloc or calloc allocated heap space; there is no other variable allocated here, right? Is it possible there's another allocation going on (the offending stack allocation) that I'm not seeing? You asked to see the code, here goes: /* Copyright 2010 Joel J. Adamson <[email protected]> $Id: age_dep.c 1010 2010-04-21 19:19:16Z joel $ age_dep.c:main file Joel J. Adamson -- http://www.unc.edu/~adamsonj Servedio Lab University of North Carolina at Chapel Hill CB #3280, Coker Hall Chapel Hill, NC 27599-3280 This file is part of an investigation of age-dependent sexual selection. This code is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This software is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with haploid. If not, see <http://www.gnu.org/licenses/>. */ #include "age_dep.h" /* global variables */ extern struct argp age_dep_argp; /* global error message variables */ char * nullmsg = "Null pointer: %i"; /* error message for conversions: */ char * errmsg = "Representation error: %s"; /* precision for formatted output: */ const char prec[] = "%-#9.8f "; const size_t age_max = AGEMAX; /* maximum age of males */ static int keep_going_p = 1; int main (int argc, char ** argv) { /* often used counters: */ int i, j; /* read the command line */ struct age_dep_args age_dep_args = { NULL, NULL, NULL }; argp_parse (&age_dep_argp, argc, argv, 0, 0, &age_dep_args); /* set the parameters here: */ /* initialize an age_dep_params structure, set the members */ age_dep_params_t * params = malloc (sizeof (age_dep_params_t)); if (params == NULL) error (ENOMEM, ENOMEM, nullmsg, __LINE__); age_dep_init_params (params, &age_dep_args); /* initialize frequencies: this initializes a list of pointers to initial frqeuencies, terminated by a NULL pointer*/ params->freqs = age_dep_init (&age_dep_args); params->by = 0.0; /* what range of parameters do we want, and with what stepsize? */ /* we should go from 0 to half-of-theta with a step size of about 0.01 */ double from = 0.0; double to = params->theta / 2.0; double stepsz = 0.01; /* did you think I would spell the whole word? */ unsigned int numparts = floor(to / stepsz); do { #pragma omp parallel for private(i) firstprivate(params) \ shared(stepsz, numparts) for (i = 0; i < numparts; i++) { params->by = i * stepsz; int tries = 0; while (keep_going_p) { /* each time through, modify mfreqs and mating table, then go again */ keep_going_p = age_dep_iterate (params, ++tries); if (keep_going_p == ERANGE) error (ERANGE, ERANGE, "Failure to converge\n"); } fprintf (stdout, "%i iterations\n", tries); } /* for i < numparts */ params->freqs = params->freqs->next; } while (params->freqs->next != NULL); return 0; } inline double age_dep_pmate (double age_dep_t, unsigned int genot, double bp, double ba) { /* the probability of mating between these phenotypes */ /* the female preference depends on whether the female has the preference allele, the strength of preference (parameter bp) and the male phenotype (age_dep_t); if the female lacks the preference allele, then this will return 0, which is not quite accurate; it should return 1 */ return bits_isset (genot, CLOCI)? 1.0 - exp (-bp * age_dep_t) + ba: 1.0; } inline double age_dep_trait (int age, unsigned int genot, double by) { /* return the male trait, a function of the trait locus, age, the age-dependent scaling parameter (bx) and the males condition genotype */ double C; double T; /* get the male's condition genotype */ C = (double) bits_popcount (bits_extract (0, CLOCI, genot)); /* get his trait genotype */ T = bits_isset (genot, CLOCI + 1)? 1.0: 0.0; /* return the trait value */ return T * by * exp (age * C); } int age_dep_iterate (age_dep_params_t * data, unsigned int tries) { /* main driver routine */ /* number of bytes for female frequencies */ size_t geno = data->age_dep_data->geno; size_t genosize = geno * sizeof (double); /* female frequencies are equal to male frequencies at birth (before selection) */ double ffreqs[geno]; if (ffreqs == NULL) error (ENOMEM, ENOMEM, nullmsg, __LINE__); /* do not set! Use memcpy (we need to alter male frequencies (selection) without altering female frequencies) */ memmove (ffreqs, data->freqs->freqs[0], genosize); /* for (int i = 0; i < geno; i++) */ /* ffreqs[i] = data->freqs->freqs[0][i]; */ #ifdef PRMTABLE age_dep_pr_mfreqs (data); #endif /* PRMTABLE */ /* natural selection: */ age_dep_ns (data); /* normalized mating table with new frequencies */ age_dep_norm_mtable (ffreqs, data); #ifdef PRMTABLE age_dep_pr_mtable (data); #endif /* PRMTABLE */ double * newfreqs; /* mutate here */ /* i.e. get the new frequency of 0-year-olds using recombination; */ newfreqs = rec_mating (data->age_dep_data); /* return block */ { if (sim_stop_ck (data->freqs->freqs[0], newfreqs, GENO, TOL) == 0) { /* if we have converged, stop the iterations and handle the data */ age_dep_sim_out (data, stdout); return 0; } else if (tries > MAXTRIES) return ERANGE; else { /* advance generations */ for (int j = age_max - 1; j < 0; j--) memmove (data->freqs->freqs[j], data->freqs->freqs[j-1], genosize); /* advance the first age-class */ memmove (data->freqs->freqs[0], newfreqs, genosize); return 1; } } } void age_dep_ns (age_dep_params_t * data) { /* calculate the new frequency of genotypes given additive fitness and selection coefficient s */ size_t geno = data->age_dep_data->geno; double w[geno]; double wbar, dtheta, ttheta, dcond, tcond; double t, cond; /* fitness parameters */ double mu, nu; mu = data->wparams[0]; nu = data->wparams[1]; /* calculate fitness */ for (int j = 0; j < age_max; j++) { int i; for (i = 0; i < geno; i++) { /* calculate male trait: */ t = age_dep_trait(j, i, data->by); /* calculate condition: */ cond = (double) bits_popcount (bits_extract(0, CLOCI, i)); /* trait-based fitness term */ dtheta = data->theta - t; ttheta = (dtheta * dtheta) / (2.0 * nu * nu); /* condition-based fitness term */ dcond = CLOCI - cond; tcond = (dcond * dcond) / (2.0 * mu * mu); /* calculate male fitness */ w[i] = 1 + exp(-tcond) - exp(-ttheta); } /* calculate mean fitness */ /* as long as we calculate wbar before altering any values of freqs[], we're safe */ wbar = gen_mean (data->freqs->freqs[j], w, geno); for (i = 0; i < geno; i++) data->freqs->freqs[j][i] = (data->freqs->freqs[j][i] * w[i]) / wbar; } } void age_dep_norm_mtable (double * ffreqs, age_dep_params_t * params) { /* this function produces a single mating table that forms the input for recombination () */ /* i is female genotype; j is male genotype; k is male age */ int i,j,k; double norm_denom; double trait; size_t geno = params->age_dep_data->geno; for (i = 0; i < geno; i++) { double norm_mtable[geno]; /* initialize the denominator: */ norm_denom = 0.0; /* find the probability of mating and add it to the denominator */ for (j = 0; j < geno; j++) { /* initialize entry: */ norm_mtable[j] = 0.0; for (k = 0; k < age_max; k++) { trait = age_dep_trait (k, j, params->by); norm_mtable[j] += age_dep_pmate (trait, i, params->bp, params->ba) * (params->freqs->freqs)[k][j]; } norm_denom += norm_mtable[j]; } /* now calculate entry (i,j) */ for (j = 0; j < geno; j++) params->age_dep_data->mtable[i][j] = (ffreqs[i] * norm_mtable[j]) / norm_denom; } } My current suspicion is the array newfreqs: I can't memmove, memcpy or assign a stack variable then hope it will persist, can I? rec_mating() returns double *.

    Read the article

  • Setting up a pc bluetooth server for android

    - by Del
    Alright, I've been reading a lot of topics the past two or three days and nothing seems to have asked this. I am writing a PC side server for my andriod device, this is for exchanging some information and general debugging. Eventually I will be connecting to a SPP device to control a microcontroller. I have managed, using the following (Android to pc) to connect to rfcomm channel 11 and exchange data between my android device and my pc. Method m = device.getClass().getMethod("createRfcommSocket", new Class[] { int.class }); tmp = (BluetoothSocket) m.invoke(device, Integer.valueOf(11)); I have attempted the createRfcommSocketToServiceRecord(UUID) method, with absolutely no luck. For the PC side, I have been using the C Bluez stack for linux. I have the following code which registers the service and opens a server socket: int main(int argc, char **argv) { struct sockaddr_rc loc_addr = { 0 }, rem_addr = { 0 }; char buf[1024] = { 0 }; char str[1024] = { 0 }; int s, client, bytes_read; sdp_session_t *session; socklen_t opt = sizeof(rem_addr); session = register_service(); s = socket(AF_BLUETOOTH, SOCK_STREAM, BTPROTO_RFCOMM); loc_addr.rc_family = AF_BLUETOOTH; loc_addr.rc_bdaddr = *BDADDR_ANY; loc_addr.rc_channel = (uint8_t) 11; bind(s, (struct sockaddr *)&loc_addr, sizeof(loc_addr)); listen(s, 1); client = accept(s, (struct sockaddr *)&rem_addr, &opt); ba2str( &rem_addr.rc_bdaddr, buf ); fprintf(stderr, "accepted connection from %s\n", buf); memset(buf, 0, sizeof(buf)); bytes_read = read(client, buf, sizeof(buf)); if( bytes_read 0 ) { printf("received [%s]\n", buf); } sprintf(str,"to Android."); printf("sent [%s]\n",str); write(client, str, sizeof(str)); close(client); close(s); sdp_close( session ); return 0; } sdp_session_t *register_service() { uint32_t svc_uuid_int[] = { 0x00000000,0x00000000,0x00000000,0x00000000 }; uint8_t rfcomm_channel = 11; const char *service_name = "Remote Host"; const char *service_dsc = "What the remote should be connecting to."; const char *service_prov = "Your mother"; uuid_t root_uuid, l2cap_uuid, rfcomm_uuid, svc_uuid; sdp_list_t *l2cap_list = 0, *rfcomm_list = 0, *root_list = 0, *proto_list = 0, *access_proto_list = 0; sdp_data_t *channel = 0, *psm = 0; sdp_record_t *record = sdp_record_alloc(); // set the general service ID sdp_uuid128_create( &svc_uuid, &svc_uuid_int ); sdp_set_service_id( record, svc_uuid ); // make the service record publicly browsable sdp_uuid16_create(&root_uuid, PUBLIC_BROWSE_GROUP); root_list = sdp_list_append(0, &root_uuid); sdp_set_browse_groups( record, root_list ); // set l2cap information sdp_uuid16_create(&l2cap_uuid, L2CAP_UUID); l2cap_list = sdp_list_append( 0, &l2cap_uuid ); proto_list = sdp_list_append( 0, l2cap_list ); // set rfcomm information sdp_uuid16_create(&rfcomm_uuid, RFCOMM_UUID); channel = sdp_data_alloc(SDP_UINT8, &rfcomm_channel); rfcomm_list = sdp_list_append( 0, &rfcomm_uuid ); sdp_list_append( rfcomm_list, channel ); sdp_list_append( proto_list, rfcomm_list ); // attach protocol information to service record access_proto_list = sdp_list_append( 0, proto_list ); sdp_set_access_protos( record, access_proto_list ); // set the name, provider, and description sdp_set_info_attr(record, service_name, service_prov, service_dsc); int err = 0; sdp_session_t *session = 0; // connect to the local SDP server, register the service record, and // disconnect session = sdp_connect( BDADDR_ANY, BDADDR_LOCAL, SDP_RETRY_IF_BUSY ); err = sdp_record_register(session, record, 0); // cleanup //sdp_data_free( channel ); sdp_list_free( l2cap_list, 0 ); sdp_list_free( rfcomm_list, 0 ); sdp_list_free( root_list, 0 ); sdp_list_free( access_proto_list, 0 ); return session; } And another piece of code, in addition to 'sdptool browse local' which can verifty that the service record is running on the pc: int main(int argc, char **argv) { uuid_t svc_uuid; uint32_t svc_uuid_int[] = { 0x00000000,0x00000000,0x00000000,0x00000000 }; int err; bdaddr_t target; sdp_list_t *response_list = NULL, *search_list, *attrid_list; sdp_session_t *session = 0; str2ba( "01:23:45:67:89:AB", &target ); // connect to the SDP server running on the remote machine session = sdp_connect( BDADDR_ANY, BDADDR_LOCAL, SDP_RETRY_IF_BUSY ); // specify the UUID of the application we're searching for sdp_uuid128_create( &svc_uuid, &svc_uuid_int ); search_list = sdp_list_append( NULL, &svc_uuid ); // specify that we want a list of all the matching applications' attributes uint32_t range = 0x0000ffff; attrid_list = sdp_list_append( NULL, &range ); // get a list of service records that have UUID 0xabcd err = sdp_service_search_attr_req( session, search_list, \ SDP_ATTR_REQ_RANGE, attrid_list, &response_list); sdp_list_t *r = response_list; // go through each of the service records for (; r; r = r-next ) { sdp_record_t *rec = (sdp_record_t*) r-data; sdp_list_t *proto_list; // get a list of the protocol sequences if( sdp_get_access_protos( rec, &proto_list ) == 0 ) { sdp_list_t *p = proto_list; // go through each protocol sequence for( ; p ; p = p-next ) { sdp_list_t *pds = (sdp_list_t*)p-data; // go through each protocol list of the protocol sequence for( ; pds ; pds = pds-next ) { // check the protocol attributes sdp_data_t *d = (sdp_data_t*)pds-data; int proto = 0; for( ; d; d = d-next ) { switch( d-dtd ) { case SDP_UUID16: case SDP_UUID32: case SDP_UUID128: proto = sdp_uuid_to_proto( &d-val.uuid ); break; case SDP_UINT8: if( proto == RFCOMM_UUID ) { printf("rfcomm channel: %d\n",d-val.int8); } break; } } } sdp_list_free( (sdp_list_t*)p-data, 0 ); } sdp_list_free( proto_list, 0 ); } printf("found service record 0x%x\n", rec-handle); sdp_record_free( rec ); } sdp_close(session); } Output: $ ./search rfcomm channel: 11 found service record 0x10008 sdptool: Service Name: Remote Host Service Description: What the remote should be connecting to. Service Provider: Your mother Service RecHandle: 0x10008 Protocol Descriptor List: "L2CAP" (0x0100) "RFCOMM" (0x0003) Channel: 11 And for logcat I'm getting this: 07-22 15:57:06.087: ERROR/BTLD(215): ****************search UUID = 0000*********** 07-22 15:57:06.087: INFO//system/bin/btld(209): btapp_dm_GetRemoteServiceChannel() 07-22 15:57:06.087: INFO//system/bin/btld(209): ##### USerial_Ioctl: BT_Wake, 0x8003 #### 07-22 15:57:06.097: INFO/ActivityManager(88): Displayed activity com.example.socktest/.socktest: 79 ms (total 79 ms) 07-22 15:57:06.697: INFO//system/bin/btld(209): ##### USerial_Ioctl: BT_Sleep, 0x8004 #### 07-22 15:57:07.517: WARN/BTLD(215): ccb timer ticks: 2147483648 07-22 15:57:07.517: INFO//system/bin/btld(209): ##### USerial_Ioctl: BT_Wake, 0x8003 #### 07-22 15:57:07.547: WARN/BTLD(215): info:x10 07-22 15:57:07.547: INFO/BTL-IFS(215): send_ctrl_msg: [BTL_IFS CTRL] send BTLIF_DTUN_SIGNAL_EVT (CTRL) 10 pbytes (hdl 14) 07-22 15:57:07.547: DEBUG/DTUN_HCID_BZ4(253): dtun_dm_sig_link_up() 07-22 15:57:07.547: INFO/DTUN_HCID_BZ4(253): dtun_dm_sig_link_up: dummy_handle = 342 07-22 15:57:07.547: DEBUG/ADAPTER(253): adapter_get_device(00:02:72:AB:7C:EE) 07-22 15:57:07.547: ERROR/BluetoothEventLoop.cpp(88): pollData[0] is revented, check next one 07-22 15:57:07.547: ERROR/BluetoothEventLoop.cpp(88): event_filter: Received signal org.bluez.Device:PropertyChanged from /org/bluez/253/hci0/dev_00_02_72_AB_7C_EE 07-22 15:57:07.777: WARN/BTLD(215): process_service_search_attr_rsp 07-22 15:57:07.787: INFO/BTL-IFS(215): send_ctrl_msg: [BTL_IFS CTRL] send BTLIF_DTUN_SIGNAL_EVT (CTRL) 13 pbytes (hdl 14) 07-22 15:57:07.787: INFO/DTUN_HCID_BZ4(253): dtun_dm_sig_rmt_service_channel: success=0, service=00000000 07-22 15:57:07.787: ERROR/DTUN_HCID_BZ4(253): discovery unsuccessful! 07-22 15:57:08.497: INFO//system/bin/btld(209): ##### USerial_Ioctl: BT_Sleep, 0x8004 #### 07-22 15:57:09.507: INFO//system/bin/btld(209): ##### USerial_Ioctl: BT_Wake, 0x8003 #### 07-22 15:57:09.597: INFO/BTL-IFS(215): send_ctrl_msg: [BTL_IFS CTRL] send BTLIF_DTUN_SIGNAL_EVT (CTRL) 11 pbytes (hdl 14) 07-22 15:57:09.597: DEBUG/DTUN_HCID_BZ4(253): dtun_dm_sig_link_down() 07-22 15:57:09.597: INFO/DTUN_HCID_BZ4(253): dtun_dm_sig_link_down device = 0xf7a0 handle = 342 reason = 22 07-22 15:57:09.597: ERROR/BluetoothEventLoop.cpp(88): pollData[0] is revented, check next one 07-22 15:57:09.597: ERROR/BluetoothEventLoop.cpp(88): event_filter: Received signal org.bluez.Device:PropertyChanged from /org/bluez/253/hci0/dev_00_02_72_AB_7C_EE 07-22 15:57:09.597: DEBUG/BluetoothA2dpService(88): Received intent Intent { act=android.bluetooth.device.action.ACL_DISCONNECTED (has extras) } 07-22 15:57:10.107: INFO//system/bin/btld(209): ##### USerial_Ioctl: BT_Sleep, 0x8004 #### 07-22 15:57:12.107: DEBUG/BluetoothService(88): Cleaning up failed UUID channel lookup: 00:02:72:AB:7C:EE 00000000-0000-0000-0000-000000000000 07-22 15:57:12.107: ERROR/Socket Test(5234): connect() failed 07-22 15:57:12.107: DEBUG/ASOCKWRP(5234): asocket_abort [31,32,33] 07-22 15:57:12.107: INFO/BLZ20_WRAPPER(5234): blz20_wrp_shutdown: s 31, how 2 07-22 15:57:12.107: DEBUG/BLZ20_WRAPPER(5234): blz20_wrp_shutdown: fd (-1:31), bta -1, rc 0, wflags 0x0 07-22 15:57:12.107: INFO/BLZ20_WRAPPER(5234): __close_prot_rfcomm: fd 31 07-22 15:57:12.107: INFO/BLZ20_WRAPPER(5234): __close_prot_rfcomm: bind not completed on this socket 07-22 15:57:12.107: DEBUG/BLZ20_WRAPPER(5234): btlif_signal_event: fd (-1:31), bta -1, rc 0, wflags 0x0 07-22 15:57:12.107: DEBUG/BLZ20_WRAPPER(5234): btlif_signal_event: event BTLIF_BTS_EVT_ABORT matched 07-22 15:57:12.107: DEBUG/BTL_IFC_WRP(5234): wrp_close_s_only: wrp_close_s_only [31] (31:-1) [] 07-22 15:57:12.107: DEBUG/BTL_IFC_WRP(5234): wrp_close_s_only: data socket closed 07-22 15:57:12.107: DEBUG/BTL_IFC_WRP(5234): wsactive_del: delete wsock 31 from active list [ad3e1494] 07-22 15:57:12.107: DEBUG/BTL_IFC_WRP(5234): wrp_close_s_only: wsock fully closed, return to pool 07-22 15:57:12.107: DEBUG/BLZ20_WRAPPER(5234): btsk_free: success 07-22 15:57:12.107: DEBUG/BLZ20_WRAPPER(5234): blz20_wrp_write: wrote 1 bytes out of 1 on fd 33 07-22 15:57:12.107: DEBUG/ASOCKWRP(5234): asocket_destroy 07-22 15:57:12.107: DEBUG/ASOCKWRP(5234): asocket_abort [31,32,33] 07-22 15:57:12.107: INFO/BLZ20_WRAPPER(5234): blz20_wrp_shutdown: s 31, how 2 07-22 15:57:12.107: DEBUG/BLZ20_WRAPPER(5234): blz20_wrp_shutdown: btsk not found, normal close (31) 07-22 15:57:12.107: DEBUG/BLZ20_WRAPPER(5234): blz20_wrp_write: wrote 1 bytes out of 1 on fd 33 07-22 15:57:12.107: INFO/BLZ20_WRAPPER(5234): blz20_wrp_close: s 33 07-22 15:57:12.107: DEBUG/BLZ20_WRAPPER(5234): blz20_wrp_close: btsk not found, normal close (33) 07-22 15:57:12.107: INFO/BLZ20_WRAPPER(5234): blz20_wrp_close: s 32 07-22 15:57:12.107: DEBUG/BLZ20_WRAPPER(5234): blz20_wrp_close: btsk not found, normal close (32) 07-22 15:57:12.107: INFO/BLZ20_WRAPPER(5234): blz20_wrp_close: s 31 07-22 15:57:12.107: DEBUG/BLZ20_WRAPPER(5234): blz20_wrp_close: btsk not found, normal close (31) 07-22 15:57:12.157: DEBUG/Sensors(88): close_akm, fd=151 07-22 15:57:12.167: ERROR/CachedBluetoothDevice(477): onUuidChanged: Time since last connect14970690 07-22 15:57:12.237: DEBUG/Socket Test(5234): -On Stop- Sorry for bombarding you guys with what seems like a difficult question and a lot to read, but I've been working on this problem for a while and I've tried a lot of different things to get this working. Let me reiterate, I can get it to work, but not using service discovery protocol. I've tried a several different UUIDs and on two different computers, although I only have my HTC Incredible to test with. I've also heard some rumors that the BT stack wasn't working on the HTC Droid, but that isn't the case, at least, for PC interaction.

    Read the article

  • Espeak SAPI/dll usage on Windows ?

    - by Quandary
    Question: I am trying to use the espeak text-to-speech engine. So for I got it working wounderfully on linux (code below). Now I wanted to port this basic program to windows, too, but it's nearly impossible... Part of the problem is that the windows dll only allows for AUDIO_OUTPUT_SYNCHRONOUS, which means it requires a callback, but I can't figure out how to play the audio from the callback... First it crashed, then I realized, I need a callback function, now I get the data in the callback function, but I don't know how to play it... as it is neither a wav file nor plays automatically as on Linux. The sourceforge site is rather useless, because it basically says use the SAPI version, but then there is no example on how to use the sapi espeak dll... Anyway, here's my code, can anybody help? #ifdef __cplusplus #include <cstdio> #include <cstdlib> #include <cstring> else #include <stdio.h> #include <stdlib.h> #include <string.h> endif include include //#include "speak_lib.h" include "espeak/speak_lib.h" // libespeak-dev: /usr/include/espeak/speak_lib.h // apt-get install libespeak-dev // apt-get install libportaudio-dev // g++ -o mine mine.cpp -lespeak // g++ -o mine mine.cpp -I/usr/include/espeak/ -lespeak // gcc -o mine mine.cpp -I/usr/include/espeak/ -lespeak char voicename[40]; int samplerate; int quiet = 0; static char genders[4] = {' ','M','F',' '}; //const char *data_path = "/usr/share/"; // /usr/share/espeak-data/ const char *data_path = NULL; // use default path for espeak-data int strrcmp(const char *s, const char *sub) { int slen = strlen(s); int sublen = strlen(sub); return memcmp(s + slen - sublen, sub, sublen); } char * strrcpy(char *dest, const char *source) { // Pre assertions assert(dest != NULL); assert(source != NULL); assert(dest != source); // tk: parentheses while((*dest++ = *source++)) ; return(--dest); } const char* GetLanguageVoiceName(const char* pszShortSign) { #define LANGUAGE_LENGTH 30 static char szReturnValue[LANGUAGE_LENGTH] ; memset(szReturnValue, 0, LANGUAGE_LENGTH); for (int i = 0; pszShortSign[i] != '\0'; ++i) szReturnValue[i] = (char) tolower(pszShortSign[i]); const espeak_VOICE **voices; espeak_VOICE voice_select; voices = espeak_ListVoices(NULL); const espeak_VOICE *v; for(int ix=0; (v = voices[ix]) != NULL; ix++) { if( !strrcmp( v->languages, szReturnValue) ) { strcpy(szReturnValue, v->name); return szReturnValue; } } // End for strcpy(szReturnValue, "default"); return szReturnValue; } // End function getvoicename void ListVoices() { const espeak_VOICE **voices; espeak_VOICE voice_select; voices = espeak_ListVoices(NULL); const espeak_VOICE *v; for(int ix=0; (v = voices[ix]) != NULL; ix++) { printf("Shortsign: %s\n", v->languages); printf("age: %d\n", v->age); printf("gender: %c\n", genders[v->gender]); printf("name: %s\n", v->name); printf("\n\n"); } // End for } // End function getvoicename int main() { printf("Hello World!\n"); const char* szVersionInfo = espeak_Info(NULL); printf("Espeak version: %s\n", szVersionInfo); samplerate = espeak_Initialize(AUDIO_OUTPUT_PLAYBACK,0,data_path,0); strcpy(voicename, "default"); // espeak --voices strcpy(voicename, "german"); strcpy(voicename, GetLanguageVoiceName("DE")); if(espeak_SetVoiceByName(voicename) != EE_OK) { printf("Espeak setvoice error...\n"); } static char word[200] = "Hello World" ; strcpy(word, "TV-fäns aufgepasst, es ist 20 Uhr 15. Zeit für Rambo 3"); strcpy(word, "Unnamed Player wurde zum Opfer von GSG9"); int speed = 220; int volume = 500; // volume in range 0-100 0=silence int pitch = 50; // base pitch, range 0-100. 50=normal // espeak.cpp 625 espeak_SetParameter(espeakRATE, speed, 0); espeak_SetParameter(espeakVOLUME,volume,0); espeak_SetParameter(espeakPITCH,pitch,0); // espeakRANGE: pitch range, range 0-100. 0-monotone, 50=normal // espeakPUNCTUATION: which punctuation characters to announce: // value in espeak_PUNCT_TYPE (none, all, some), espeak_VOICE *voice_spec = espeak_GetCurrentVoice(); voice_spec->gender=2; // 0=none 1=male, 2=female, //voice_spec->age = age; espeak_SetVoiceByProperties(voice_spec); espeak_Synth( (char*) word, strlen(word)+1, 0, POS_CHARACTER, 0, espeakCHARS_AUTO, NULL, NULL); espeak_Synchronize(); strcpy(voicename, GetLanguageVoiceName("EN")); espeak_SetVoiceByName(voicename); strcpy(word, "Geany was fragged by GSG9 Googlebot"); strcpy(word, "Googlebot"); espeak_Synth( (char*) word, strlen(word)+1, 0, POS_CHARACTER, 0, espeakCHARS_AUTO, NULL, NULL); espeak_Synchronize(); espeak_Terminate(); printf("Espeak terminated\n"); return EXIT_SUCCESS; } /* if(espeak_SetVoiceByName(voicename) != EE_OK) { memset(&voice_select,0,sizeof(voice_select)); voice_select.languages = voicename; if(espeak_SetVoiceByProperties(&voice_select) != EE_OK) { fprintf(stderr,"%svoice '%s'\n",err_load,voicename); exit(2); } } */ The above code is for Linux. The below code is about as far as I got on Vista x64 (32 bit emu): #ifdef __cplusplus #include <cstdio> #include <cstdlib> #include <cstring> else #include <stdio.h> #include <stdlib.h> #include <string.h> endif include include include "speak_lib.h" //#include "espeak/speak_lib.h" // libespeak-dev: /usr/include/espeak/speak_lib.h // apt-get install libespeak-dev // apt-get install libportaudio-dev // g++ -o mine mine.cpp -lespeak // g++ -o mine mine.cpp -I/usr/include/espeak/ -lespeak // gcc -o mine mine.cpp -I/usr/include/espeak/ -lespeak char voicename[40]; int iSampleRate; int quiet = 0; static char genders[4] = {' ','M','F',' '}; //const char *data_path = "/usr/share/"; // /usr/share/espeak-data/ //const char *data_path = NULL; // use default path for espeak-data const char *data_path = "C:\Users\Username\Desktop\espeak-1.43-source\espeak-1.43-source\"; int strrcmp(const char *s, const char *sub) { int slen = strlen(s); int sublen = strlen(sub); return memcmp(s + slen - sublen, sub, sublen); } char * strrcpy(char *dest, const char *source) { // Pre assertions assert(dest != NULL); assert(source != NULL); assert(dest != source); // tk: parentheses while((*dest++ = *source++)) ; return(--dest); } const char* GetLanguageVoiceName(const char* pszShortSign) { #define LANGUAGE_LENGTH 30 static char szReturnValue[LANGUAGE_LENGTH] ; memset(szReturnValue, 0, LANGUAGE_LENGTH); for (int i = 0; pszShortSign[i] != '\0'; ++i) szReturnValue[i] = (char) tolower(pszShortSign[i]); const espeak_VOICE **voices; espeak_VOICE voice_select; voices = espeak_ListVoices(NULL); const espeak_VOICE *v; for(int ix=0; (v = voices[ix]) != NULL; ix++) { if( !strrcmp( v->languages, szReturnValue) ) { strcpy(szReturnValue, v->name); return szReturnValue; } } // End for strcpy(szReturnValue, "default"); return szReturnValue; } // End function getvoicename void ListVoices() { const espeak_VOICE **voices; espeak_VOICE voice_select; voices = espeak_ListVoices(NULL); const espeak_VOICE *v; for(int ix=0; (v = voices[ix]) != NULL; ix++) { printf("Shortsign: %s\n", v->languages); printf("age: %d\n", v->age); printf("gender: %c\n", genders[v->gender]); printf("name: %s\n", v->name); printf("\n\n"); } // End for } // End function getvoicename /* Callback from espeak. Directly speaks using AudioTrack. */ define LOGI(x) printf("%s\n", x) static int AndroidEspeakDirectSpeechCallback(short *wav, int numsamples, espeak_EVENT *events) { char buf[100]; sprintf(buf, "AndroidEspeakDirectSpeechCallback: %d samples", numsamples); LOGI(buf); if (wav == NULL) { LOGI("Null: speech has completed"); } if (numsamples > 0) { //audout->write(wav, sizeof(short) * numsamples); sprintf(buf, "AudioTrack wrote: %d bytes", sizeof(short) * numsamples); LOGI(buf); } return 0; // continue synthesis (1 is to abort) } static int AndroidEspeakSynthToFileCallback(short *wav, int numsamples,espeak_EVENT *events) { char buf[100]; sprintf(buf, "AndroidEspeakSynthToFileCallback: %d samples", numsamples); LOGI(buf); if (wav == NULL) { LOGI("Null: speech has completed"); } // The user data should contain the file pointer of the file to write to //void* user_data = events->user_data; FILE* user_data = fopen ( "myfile1.wav" , "ab" ); FILE* fp = static_cast<FILE *>(user_data); // Write all of the samples fwrite(wav, sizeof(short), numsamples, fp); return 0; // continue synthesis (1 is to abort) } int main() { printf("Hello World!\n"); const char* szVersionInfo = espeak_Info(NULL); printf("Espeak version: %s\n", szVersionInfo); iSampleRate = espeak_Initialize(AUDIO_OUTPUT_SYNCHRONOUS, 4096, data_path, 0); if (iSampleRate <= 0) { printf("Unable to initialize espeak"); return EXIT_FAILURE; } //samplerate = espeak_Initialize(AUDIO_OUTPUT_PLAYBACK,0,data_path,0); //ListVoices(); strcpy(voicename, "default"); // espeak --voices //strcpy(voicename, "german"); //strcpy(voicename, GetLanguageVoiceName("DE")); if(espeak_SetVoiceByName(voicename) != EE_OK) { printf("Espeak setvoice error...\n"); } static char word[200] = "Hello World" ; strcpy(word, "TV-fäns aufgepasst, es ist 20 Uhr 15. Zeit für Rambo 3"); strcpy(word, "Unnamed Player wurde zum Opfer von GSG9"); int speed = 220; int volume = 500; // volume in range 0-100 0=silence int pitch = 50; // base pitch, range 0-100. 50=normal // espeak.cpp 625 espeak_SetParameter(espeakRATE, speed, 0); espeak_SetParameter(espeakVOLUME,volume,0); espeak_SetParameter(espeakPITCH,pitch,0); // espeakRANGE: pitch range, range 0-100. 0-monotone, 50=normal // espeakPUNCTUATION: which punctuation characters to announce: // value in espeak_PUNCT_TYPE (none, all, some), //espeak_VOICE *voice_spec = espeak_GetCurrentVoice(); //voice_spec->gender=2; // 0=none 1=male, 2=female, //voice_spec->age = age; //espeak_SetVoiceByProperties(voice_spec); //espeak_SetSynthCallback(AndroidEspeakDirectSpeechCallback); espeak_SetSynthCallback(AndroidEspeakSynthToFileCallback); unsigned int unique_identifier; espeak_ERROR err = espeak_Synth( (char*) word, strlen(word)+1, 0, POS_CHARACTER, 0, espeakCHARS_AUTO, &unique_identifier, NULL); err = espeak_Synchronize(); /* strcpy(voicename, GetLanguageVoiceName("EN")); espeak_SetVoiceByName(voicename); strcpy(word, "Geany was fragged by GSG9 Googlebot"); strcpy(word, "Googlebot"); espeak_Synth( (char*) word, strlen(word)+1, 0, POS_CHARACTER, 0, espeakCHARS_AUTO, NULL, NULL); espeak_Synchronize(); */ // espeak_Cancel(); espeak_Terminate(); printf("Espeak terminated\n"); system("pause"); return EXIT_SUCCESS; }

    Read the article

< Previous Page | 6 7 8 9 10