Search Results

Search found 328 results on 14 pages for 'recv'.

Page 10/14 | < Previous Page | 6 7 8 9 10 11 12 13 14  | Next Page >

  • Unable to force Debian to do unattended install... libc6 wants interactive confirm

    - by JD Long
    I'm trying to create a script that forces a Debian Lenny install to install the latest version of CRAN R. During the install it appears libc6 is upgraded and the install wants interactive confirm that it's OK to restart three services (mysql, exim4, cron). This process HAS to be unattended as it runs on Amazon's Elastic Map Reduce (EMR) machines. But I'm running out of options. Here's a few things I've tried: This previous question appears to be exactly what I'm looking for. So I set up my install script as follows: # set my CRAN repos... yes, I know there's a new convention where to put these. echo "deb http://cran.r-project.org/bin/linux/debian lenny-cran/" | sudo tee -a /etc/apt/sources.list echo "deb-src http://cran.r-project.org/bin/linux/debian lenny-cran/" | sudo tee -a /etc/apt/sources.list # set the dpkg.cfg options per the previous SuperUser question echo "force-confold" | sudo tee -a /etc/dpkg/dpkg.cfg echo "force-confdef" | sudo tee -a /etc/dpkg/dpkg.cfg export DEBIAN_FRONTEND=noninteractive # add key to keyring so it doesn't complain gpg --keyserver pgp.mit.edu --recv-key 381BA480 gpg -a --export 381BA480 > jranke_cran.asc sudo apt-key add jranke_cran.asc sudo apt-get update # install the latest R sudo apt-get install --yes --force-yes r-base But this script hangs with the following request for input: OK, so I tried stopping the services using the following script: sudo /etc/init.d/mysql stop sudo /etc/init.d/exim4 stop sudo /etc/init.d/cron stop sudo apt-get install --yes --force-yes libc6 This does not work and the interactive screen comes back, but this time with only cron listed as the service that must be restarted. So is there a way to make libc6 just restart these services with no user input? Or is there a way to stop cron so it does not cause an interactive prompt? Maybe a creative option I've never thought of? Keep in mind that this system is brought up, some Hadoop code is run, and then it's torn down. So I can put up with side effects and bad behavior that we might not want in a production desktop machine or web server.

    Read the article

  • Website has become slower on a VPS, was much fast on a shared host. What's wrong?

    - by Arpit Tambi
    My shared host suspended my website stating system overload, so I moved my website to a VPS which has 4GB RAM. But for some reason the website has become very slow. This is the vmstat output - procs -----------memory---------- ---swap-- -----io---- --system-- -----cpu------ r b swpd free buff cache si so bi bo in cs us sy id wa st 1 0 0 3050500 0 0 0 0 0 1 0 0 0 0 100 0 0 Here's the Apache Benchmark output for a STATIC html page I ran on the server itself - Benchmarking www.ask-oracle.com (be patient)...apr_poll: The timeout specified has expired (70007) Total of 20 requests completed Update: Server Config: List item Centos 5.6 4 cores cpu 4 GB RAM LAMP stack with APC Wordpress Only one website It takes almost double time to load now, same website was much fast on shared hosting. I know I need to tweak some settings but have no clue where to start from? I have already tried to optimize apache, mysql etc. Update 2: CPU usage is low, see uptime output: 11:09:02 up 7 days, 21:26, 1 user, load average: 0.09, 0.11, 0.09 Update 3: When I load any webpage, browser shows "Waiting" for a long time and then page loads quickly. So I suspect server can accept only limited connections and holds extra connections in a waiting state. How to check this? Update 4: Following is the output on executing netperf TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to localhost.localdomain (127.0.0.1) port 0 AF_INET Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 10.00 9615.40 [root@ip-118-139-177-244 j3ngn5ri6r01t3]# Here are the Apache MPM settings from httpd.conf, do they look okay? <IfModule worker.c> StartServers 5 MaxClients 100 MinSpareThreads 50 MaxSpareThreads 250 ThreadsPerChild 125 MaxRequestsPerChild 10000 ServerLimit 100 </IfModule>

    Read the article

  • Postfix "loops back to myself" error on relay to another IP address on same machine

    - by Nic Wolff
    I'm trying to relay all mail for one domain "ourdomain.tld" from Postfix running on port 2525 of one interface to another SMTP server running on port 25 of another interface on the same machine. However, when a message is received for that domain, we're getting a "mail for loops back to myself" error. Below are netstat and postconf, the contents of our /etc/postfix/transport file, and the error that Postfix is logging. (The high bytes of each IP address are XXXed out.) Am I missing something obvious? Thanks - # netstat -ln -A inet Proto Recv-Q Send-Q Local Address Foreign Address State ... tcp 0 0 XXX.XXX.138.209:25 0.0.0.0:* LISTEN tcp 0 0 XXX.XXX.138.210:2525 0.0.0.0:* LISTEN # postconf -d | grep mail_version mail_version = 2.8.4 # postconf -n alias_maps = hash:/etc/aliases allow_mail_to_commands = alias,forward bounce_queue_lifetime = 0 command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix data_directory = /var/lib/postfix debug_peer_level = 2 default_privs = nobody default_process_limit = 200 html_directory = no inet_interfaces = XXX.XXX.138.210 local_recipient_maps = local_transport = error:local mail delivery is disabled mail_owner = postfix mailbox_size_limit = 0 mailq_path = /usr/bin/mailq manpage_directory = /usr/local/man message_size_limit = 10240000 mydestination = mydomain = ourdomain.tld myhostname = ourdomain.tld mynetworks = XXX.XXX.119.0/24, XXX.XXX.138.0/24, XXX.XXX.136.128/25 myorigin = ourdomain.tld newaliases_path = /usr/bin/newaliases queue_directory = /var/spool/postfix readme_directory = /etc/postfix recipient_delimiter = + relay_domains = ourdomain.tld relay_recipient_maps = sample_directory = /etc/postfix sendmail_path = /usr/sbin/sendmail setgid_group = postdrop smtpd_authorized_verp_clients = $mynetworks smtpd_recipient_limit = 10000 transport_maps = hash:/etc/postfix/transport unknown_local_recipient_reject_code = 450 # cat /etc/postfix/transport ourdomain.tld relay:[XXX.XXX.138.209]:25 # tail -f /var/log/maillog ... Aug 2 23:58:36 va4 postfix/smtp[9846]: 9858A758404: to=<nicwolff@... >, relay=XXX.XXX.138.209[XXX.XXX.138.209]:25, delay=1.1, delays=0.08/0.01/1/0, dsn=5.4.6, status=bounced (mail for [XXX.XXX.138.209]:25 loops back to myself)

    Read the article

  • Juniper’s Network Connect ncsvc on Linux: “host checker failed, error 10”

    - by hfs
    I’m trying to log in to a Juniper VPN with Network Connect from a headless Linux client. I followed the instructions and used the script from http://mad-scientist.us/juniper.html. When running the script with --nogui switch the command that gets finally executed is $HOME/.juniper_networks/network_connect/ncsvc -h HOST -u USER -r REALM -f $HOME/.vpn.default.crt. I get asked for the password, a line “Connecting to…” is printed but then the programm silently stops. When adding -L 5 (most verbose logging) to the command line, these are the last messages printed to the log: dsclient.info state: kStateCacheCleaner (dsclient.cpp:280) dsclient.info --> POST /dana-na/cc/ccupdate.cgi (authenticate.cpp:162) http_connection.para Entering state_start_connection (http_connection.cpp:282) http_connection.para Entering state_continue_connection (http_connection.cpp:299) http_connection.para Entering state_ssl_connect (http_connection.cpp:468) dsssl.para SSL connect ssl=0x833e568/sd=4 connection using cipher RC4-MD5 (DSSSLSock.cpp:656) http_connection.para Returning DSHTTP_COMPLETE from state_ssl_connect (http_connection.cpp:476) DSHttp.debug state_reading_response_body - copying 0 buffered bytes (http_requester.cpp:800) DSHttp.debug state_reading_response_body - recv'd 0 bytes data (http_requester.cpp:833) dsclient.info <-- 200 (authenticate.cpp:194) dsclient.error state host checker failed, error 10 (dsclient.cpp:282) ncapp.error Failed to authenticate with IVE. Error 10 (ncsvc.cpp:197) dsncuiapi.para DsNcUiApi::~DsNcUiApi (dsncuiapi.cpp:72) What does host checker failed mean? How can I find out what it tried to check and what failed? The HostChecker Configuration Guide mentions that a $HOME/.juniper_networks/tncc.jar gets installed on Linux, but my installation contains no such file. From that I concluded that HostChecker is disabled for my VPN on Linux? Are the POST to /dana-na/cc/ccupdate.cgi and “host checker failed” connected or independent? By running the connection over a SSL proxy I found out that the POST data is status=NOTOK (Funny side note: the client of the oh-so-secure VPN does not validate the server’s SSL certificate, so is wide open to MITM attacks…). So it seems that it’s the client that closes the connection and not the server.

    Read the article

  • cURL - Unkown SSL protocol error - OS X 10.9

    - by saq7
    I am trying to use cURL and get the following error on every https request I make. The error is always the same. HTTP requests work flawlessly. The verbose output is quite useless. Saquibs-MacBook-Pro:~ skothawala$ curl https://google.com -vv * Adding handle: conn: 0x7fe09b803a00 * Adding handle: send: 0 * Adding handle: recv: 0 * Curl_addHandleToPipeline: length: 1 * - Conn 0 (0x7fe09b803a00) send_pipe: 1, recv_pipe: 0 * About to connect() to google.com port 443 (#0) * Trying 74.125.226.129... * Connected to google.com (74.125.226.129) port 443 (#0) * Unknown SSL protocol error in connection to google.com:-9805 * Closing connection 0 curl: (35) Unknown SSL protocol error in connection to google.com:-9805 I have looked through other answers on this forum and other places on the internet, but haven't found an answer. Most people's issues involve particular servers and the configuration of SSL on these servers. Mine however is problematic anytime HTTPS is used (with any website). Can someone please suggest what I should be looking into to solve the problem? Can it be that something is not properly configured? What should I be looking for?

    Read the article

  • Solaris 10 invalid ARP requests from 0.0.0.0? Link up/down every hour or 2

    - by JWD
    The guys at the data center where I'm hosting a server running Solaris 10 are telling me that my server is making a lot of invalid arp requests. This is an example of a portion of what was sent to me from the logs (with Mac addresses and IP addresses changed). [mymacaddress]/0.0.0.0/0000.0000.0000/[myipaddress]/[Datestamp]) It's being logged every hour. I don't see anything in the arp tables (arp -a) or routing tables (netstat -r) and I don't see anything relating to 0.0.0.0 when snoping the arp requests. The only place I see any reference to 0.0.0.0 is if I do netstat -a for the SCTP SCTP: Local Address Remote Address Swind Send-Q Rwind Recv-Q StrsI/O State ------------------------------- ------------------------------- ------ ------ ------ ------ ------- ----------- 0.0.0.0 0.0.0.0 0 0 102400 0 32/32 CLOSED But not really sure what that means. Doesn't seem like I can disable SCTP. There are some tunable SCTP parameters but it's not something I'm familiar with. Do I have to add changes to /etc/system? Looks like sctp_heartbeat_interval might be what I need to change? If it makes any difference, I have a few solaris zones running on this server, each with their own IP address on a virtual interface. eth0:0, eth0:1, etc. Does anyone have any idea what might be causing this and how to stop it? I think the switch I'm connected to doesn't like it and momentarily drops the connection. Is there anyway to at least block those requests using ipfilter or something else? Update: This was happening more frequently but now it seems to be happening roughly every hour or every two hours. It's not consistent. I tried setting setting the link speed and duplex to match the switch port and that seemed to make it stop happening for a few hours but then it started again.

    Read the article

  • Forward mDns from one subnet to another?

    - by user37278
    Is there an ipfw rule that can easily forward mDns packets from one subnet to another? I have a Snow Leopard Server machine serving as the gateway between the two subnets and would like for machines in each subnet to see the services available in the other subnet. The gateway machine is already confirmed as configured correctly such that packets route correctly between the two subnets (ping works, traceroute shows the subnet hop, etc). My problem in designing a ipfw rule is that I don't know how to instruct that I would like multicast packets addressed to 224.0.0.251:5353 on en0 to be addressed to the same ip/port but on fw0 (the other interface). I attempted a rule such as fwd 192.168.10.1 log udp from 192.168.1.0/24 to 224.0.0.251 recv en1 to force the packet to hop over to the other interface (from en1 to fw0), but no dice. The ipfw log shows that the rule is being triggered by packets, but tcpdump isn't showing any packets on the other interface. Also, the only other firewall rules in place are the divert port 8668 and rule #65535 "allow any to any". Any suggestions? Thanks.

    Read the article

  • Varnish returning 503, FetchError (could not get storage)

    - by Archan
    On the current setup we're running into a problem with Varnish, we're running a CentOS 5.7 x86_64 xenpv, with Cpanel WHM, hosted at VPS.net. Sometimes we will recieve a Guru Meditation from Varnish, and when we look in the varnishlog with the following command varnishlog -d -c -m TxStatus:503 it returns output similar to the following: 15 VCL_call c recv 15 VCL_acl c NO_MATCH devs 15 VCL_return c pass 15 VCL_call c hash 15 Hash c **** 15 Hash c ************* 15 VCL_return c hash 15 VCL_call c pass pass 15 Backend c 12 default default 15 TTL c 1835862523 RFC 0 -1 -1 1332454056 0 1332454055 375007920 0 15 VCL_call c fetch hit_for_pass 15 ObjProtocol c HTTP/1.1 15 ObjResponse c OK 15 ObjHeader c Date: Thu, 22 Mar 2012 22:07:35 GMT 15 ObjHeader c Server: Apache/2.2.21 (Unix) mod_ssl/2.2.21 OpenSSL/0.9.8e-fips-rhel5 mod_bwlimited/1.4 mod_fcgid/2.3.6 15 ObjHeader c X-Powered-By: PHP/5.3.9 15 ObjHeader c Expires: Thu, 19 Nov 1981 08:52:00 GMT 15 ObjHeader c Cache-Control: no-store, no-cache, must-revalidate, post-check=0, pre-check=0 15 ObjHeader c Pragma: no-cache 15 ObjHeader c Content-Type: text/html; charset=utf-8 15 ObjHeader c X-Cacheable: NO:Cache-Control=private 15 FetchError c chunked read_error: 12 (Could not get storage) 15 VCL_call c error deliver 15 VCL_call c deliver deliver As far as I have could gather, we could try increasing the nuke_limit, but currently we have a nuke_limit of 500, and when running varnishstat -1 -f n_lru_nuked we "only" get a total of 1031, even though we have seen the error happen on several pages. When we then run top to see how much memory Varnish is using, it only shows that it is using 763m, although we've set it to be allowed to use 1200m. Any ideas of what the problem can be?

    Read the article

  • Malicious content on server - next steps advice [closed]

    - by Under435
    Possible Duplicate: My server's been hacked EMERGENCY I just got an e-mail from my hosting company that they got a report of malicious content being hosted on my vps. I was unaware of this and started looking into it. I discovered a file called /var/www/mysite.com/osc.htm. Soon after I discovered some weird php files wp-includes.php and ndlist.php both recognized as being PHP/WebShell.A.1 virus. I removed all these files but I'm unsure of what to do next. Can anyone help me analyze the output below of sudo netstat -A inet -p -e and give advice on what's best to do next. Thanks very much in advance Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 localhost.localdo:mysql localhost.localdo:37495 TIME_WAIT root 0 - tcp 0 1 mysite.com:50524 xnacreators.net:smtp SYN_SENT Debian-exim 69746 25848/exim4 tcp 0 0 mysite.com:www tha165.thehealtha:37065 TIME_WAIT root 0 - tcp 0 0 localhost.localdo:37494 localhost.localdo:mysql TIME_WAIT root 0 - udp 0 0 mysite.com:59447 merlin.ensma.fr:ntp ESTABLISHED ntpd 3769 2522/ntpd udp 0 0 mysite.com:36432 beast.syus.org:ntp ESTABLISHED ntpd 4357 2523/ntpd udp 0 0 mysite.com:48212 formularfetischiste:ntp ESTABLISHED ntpd 3768 2522/ntpd udp 0 0 mysite.com:46690 formularfetischiste:ntp ESTABLISHED ntpd 4354 2523/ntpd udp 0 0 mysite.com:35009 stratum-2-core-a.qu:ntp ESTABLISHED ntpd 4356 2523/ntpd udp 0 0 mysite.com:58702 stratum-2-core-a.qu:ntp ESTABLISHED ntpd 3770 2522/ntpd udp 0 0 mysite.com:49583 merlin.ensma.fr:ntp ESTABLISHED ntpd 4355 2523/ntpd udp 0 0 mysite.com:56290 beast.syus.org:ntp ESTABLISHED ntpd 3771 2522/ntpd

    Read the article

  • How to test nginx proxy timeouts

    - by mkorszun
    Target: I would like to test all Nginx proxy timeout parameters in very simple scenario. My first approach was to create really simple HTTP server and put some timeouts: Between listen and accept to test proxy_connect_timeout Between accept and read to test proxy_send_timeout Between read and send to test proxy_read_timeout Test: 1) Server code (python): import socket import os import time import threading def http_resp(conn): conn.send("HTTP/1.1 200 OK\r\n") conn.send("Content-Length: 0\r\n") conn.send("Content-Type: text/xml\r\n\r\n\r\n") def do(conn, addr): print 'Connected by', addr print 'Sleeping before reading data...' time.sleep(0) # Set to test proxy_send_timeout data = conn.recv(1024) print 'Sleeping before sending data...' time.sleep(0) # Set to test proxy_read_timeout http_resp(conn) print 'End of data stream, closing connection' conn.close() def main(): s = socket.socket(socket.AF_INET, socket.SOCK_STREAM) s.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1) s.bind(('', int(os.environ['PORT']))) s.listen(1) print 'Sleeping before accept...' time.sleep(130) # Set to test proxy_connect_timeout while 1: conn, addr = s.accept() t = threading.Thread(target=do, args=(conn, addr)) t.start() if __name__ == "__main__": main() 2) Nginx configuration: I have extended Nginx default configuration by setting explicitly proxy_connect_timeout and adding proxy_pass pointing to my local HTTP server: location / { proxy_pass http://localhost:8888; proxy_connect_timeout 200; } 3) Observation: proxy_connect_timeout - Even though setting it to 200s and sleeping only 130s between listen and accept Nginx returns 504 after ~60s which might be because of the default proxy_read_timeout value. I do not understand how proxy_read_timeout could affect connection at so early stage (before accept). I would expect 200 here. Please explain! proxy_send_timeout - I am not sure if my approach to test proxy_send_timeout is correct - i think i still do not understand this parameter correctly. After all, delay between accept and read does not force proxy_send_timeout. proxy_read_timeout - it seems to be pretty straightforward. Setting delay between read and write does the job. So I guess my assumptions are wrong and probably I do not understand proxy_connect and proxy_send timeouts properly. Can some explain them to me using above test if possible (or modifying if required).

    Read the article

  • My Mac OS X 10.5 netstat reveals a lot of open UDP connections.

    - by bboyreason
    here are my netstat results (besides server-less connections): Active Internet connections Proto Recv-Q Send-Q Local Address Foreign Address (state) tcp4 0 0 192.168.1.98.49224 r1.ycpi.vip.sp2..http ESTABLISHED tcp4 0 0 192.168.1.98.49223 r1.ycpi.vip.sp2..http ESTABLISHED tcp4 0 0 192.168.1.98.49203 lax04s01-in-f189.https ESTABLISHED tcp4 0 0 192.168.1.98.49201 lax04s01-in-f19..https ESTABLISHED tcp4 0 0 192.168.1.98.49198 lax04s01-in-f19..http ESTABLISHED tcp4 0 0 192.168.1.98.49196 lax04s01-in-f19..https ESTABLISHED tcp4 0 0 192.168.1.98.49194 lax04s01-in-f19..https ESTABLISHED tcp4 0 0 192.168.1.98.49192 lax04s01-in-f19..https ESTABLISHED tcp4 0 0 192.168.1.98.49183 r1.ycpi.vip.sp2..http ESTABLISHED tcp4 0 37 192.168.1.98.49179 l1.login.vip.sp1.https CLOSING tcp4 0 0 192.168.1.98.49175 lax04s01-in-f104.https ESTABLISHED tcp4 0 37 192.168.1.98.49167 l1.login.vip.sp1.https LAST_ACK tcp4 0 0 192.168.1.98.49164 lax04s01-in-f19..https ESTABLISHED tcp4 0 0 192.168.1.98.49174 69.31.112.122.http TIME_WAIT tcp4 0 0 192.168.1.98.49173 69.31.113.83.http TIME_WAIT udp4 0 0 *.ipp **.* udp4 0 0 192.168.1.98.ntp **.* udp4 0 0 *.49628 **.* udp4 0 0 *.51997 **.* udp4 0 0 *.64675 **.* udp4 0 0 *.61947 **.* udp4 0 0 *.65152 **.* udp4 0 0 *.55643 **.* udp4 0 0 *.51704 **.* udp4 0 0 *.59757 **.* udp4 0 0 *.53643 **.* udp4 0 0 *.65346 **.* udp4 0 0 *.61960 **.* udp4 0 0 **.* **.* udp6 0 0 localhost.ntp **.* udp4 0 0 practivate.adobe.ntp **.* udp6 0 0 localhost.ntp **.* udp6 0 0 *.ntp **.* udp4 0 0 *.ntp **.* udp6 0 0 *.mdns **.* udp4 0 0 *.mdns **.** udp4 0 0 *.** **.** udp4 0 0 *.** **.** omitted a few asterisks, basically all the empty spots are asterisks what is up with all the UDP connections listening on any port? is that what this means? the internet activity that should be going in is that i connected via wpa to wifi at a small restaurant visited a few pages, checking mail from a few different accounts, no new mail or downloads where done. ?

    Read the article

  • use ssh tunnel with phpmyadmin

    - by JohnMerlino
    I been using ssh tunnel to bypass firewall of remote mysql server. On my Ubuntu 12.04 installation, it works via the terminal and it works when using a program called mysql workbench. However, that program freezes often and I want to try phpmyadmin as an alternative. However, I cannot connect to remote server using ssh tunnel on phpmyadmin, albeit I can connect locally. These are the steps I've tried: 1) Open a tunnel, listening on localhost:3307 and forwarding everything to xxx.xxx.xxx.xxx:3306 (used 3307 because MySQL on my local machine uses the default port 3306): ssh -L 3307:localhost:3306 [email protected] So now I have the port for tunnel open and I have my local mysql installation default port: $ netstat -tln Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 127.0.0.1:3306 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:3307 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN ... 2) Now I can easily connect to remote server via localhost using the terminal: $ mysql -u user.name -p -h 127.0.0.1 -P 3307 Notice that I expicitly identify 3307 as the port, so traffic forwards to the remote server, and hence it logs me in to the remote server. Unfortunately, the localhost/phpmyadmin local login interface doesn't allow you to specify a port option. So I modify the config-db.php file and change the $dbport variable to 3307, under the impression that the phpmyadmin interface will now work with port 3307: $ sudo vim /etc/phpmyadmin/config-db.php $dbport='3307'; Then I restart the mysql server. Unfortunately, it didn't work. When I use the remote credentials to login, it gives me error: #1045 Cannot log in to the MySQL server

    Read the article

  • Why is this iptables rule that does port forwarding not working?

    - by videoguy
    I have a server bound to localhost:7060. It is using ipv6 socket instead of ipv4. Below is netstat outout. # netstat -an Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 10.200.32.98:1720 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:4122 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:4123 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:4123 127.0.0.1:43051 ESTABLISHED tcp 0 0 10.200.32.98:5555 10.200.32.44:53162 ESTABLISHED tcp6 0 0 :::5060 :::* LISTEN tcp6 0 0 ::ffff:127.0.0.1:7060 :::* LISTEN tcp6 0 0 :::23 :::* LISTEN tcp6 0 0 ::ffff:10.200.32.98:23 ::ffff:10.200.32.142:43505 ESTABLISHED tcp6 0 0 ::ffff:127.0.0.1:43051 ::ffff:127.0.0.1:4123 ESTABLISHED tcp6 0 0 ::ffff:10.200.32.98:23 ::ffff:10.200.32.44:53195 ESTABLISHED udp6 0 0 :::5060 :::* CLOSE # I want to setup a port forwarding rule that accepts connections on port 24 (on all interfaces loopback as well as eth0) and forward the data to localhost:7060. This is how I am setting up the iptables rule: iptables -t nat -A PREROUTING -p tcp --dport 24 -j DNAT --to 127.0.0.1:7060** It is not working. When I telnet from different box, I see the following $telnet 10.200.32.98 24 Trying 10.200.32.98... If I change the server to bind to *:7060 and set the following rule, it seems to work fine. iptables -t nat -A PREROUTING -p tcp --dport 24 -j REDIRECT --to-port 7060 But that will make my server available on WAN interface which I don't like. I feel it had something to do with ipv6 socket (tcp6 line in netstat output). This whole thing is done on an Android device with custom built Android platform image. How do I get this working?

    Read the article

  • Enabling http access on port 80 for centos 6.3 from console

    - by Hugo
    Have a centos 6.3 box running on Parallels and I'm trying to open port 80 to be accesible from outside tried the gui solution from this post and it works, but I need to get it done from a script. Tried to do this: sudo /sbin/iptables -A INPUT -p tcp -m state --state NEW -m tcp --dport 80 -j ACCEPT sudo /sbin/iptables-save sudo /sbin/service iptables restart This creates exactly the same iptables entries as the GUI tool except it does not work: $ telnet xx.xxx.xx.xx 80 Trying xx.xxx.xx.xx... telnet: connect to address xx.xxx.xx.xx: Connection refused telnet: Unable to connect to remote host UPDATE: $ netstat -ntlp (No info could be read for "-p": geteuid()=500 but you should be root.) Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN - tcp 0 0 127.0.0.1:6379 0.0.0.0:* LISTEN - tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN - tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN - tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN - tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN - tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN - tcp 0 0 0.0.0.0:37439 0.0.0.0:* LISTEN - tcp 0 0 :::111 :::* LISTEN - tcp 0 0 :::22 :::* LISTEN - tcp 0 0 ::1:631 :::* LISTEN - tcp 0 0 :::60472 :::* LISTEN - $ sudo cat /etc/sysconfig/iptables # Generated by iptables-save v1.4.7 on Wed Dec 12 18:04:25 2012 *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [5:640] -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -p tcp -m state --state NEW -m tcp --dport 22 -j ACCEPT -A INPUT -j REJECT --reject-with icmp-host-prohibited -A INPUT -p tcp -m state --state NEW -m tcp --dport 80 -j ACCEPT -A FORWARD -j REJECT --reject-with icmp-host-prohibited COMMIT # Completed on Wed Dec 12 18:04:25 2012

    Read the article

  • How to make a redundant desktop system with daily snapshots? (Is btrfs ready for use?)

    - by TestUser16418
    I want to configure a desktop system in which the home filesystem would be redundant (e.g. RAID-1), and would have weekly snapshots taken. I've already done this with ZFS, the snapshot system is wonderful, and with send/recv you can easily create backups on external media. Unfortunately, at that point, I want GNU+Linux and not FreeBSD or Solaris, so I'm looking for suggestions for good alternatives. I reckon that my alternatives are: btrfs - it seems to be exactly what I need, it has snapshots and commands that allow you to easily replicate zfs send. Yet all documentation mentions that it's still experimental. I can't seem to find any actual reports on its reliability or usability issues. Can you point me to any information on that issue that could clarify whether it would be a possible choice? I have a large preference for this option, mostly because I don't want to reformat the drives when btrfs becomes ready, but I there's no information on whether it's usable at all, whether it's a silly idea to use it, etc. The question that I cannot get the answer to is what does "experimental" mean. lvm snapshots and ext4 - preferably not, since it can consume an awful amount of space when new files are created. Creating 200 GB files requres 200 GB free space and 200 GB additionally for snapshots. I also have found it unreliable -- failed metadata rewrite results in an unreadable PV. I'm wondering how btrfs would compare here. A single filesystem (ext4) on a RAID-1 array with custom COW snapshots with hardlinks (like cp -al). That's my current preference if I can't use btrfs. So how experimental btrfs is, which should I choose, and do I have any other options? What if I don't keep external incremental backups, would that affect my choice?

    Read the article

  • How can I get Solr listening on 0.0.0.0 instead of just localhost?

    - by Neil
    I'm trying to get Solr to listen on 0.0.0.0 instead of just localhost, and it doesn't seem to be picking up the configuration options. I downloaded apache-solr-1.4.1 from the Solr website, and I'm running: user@:apache-solr-1.4.1/example $ java -jar start.jar With these configuration options: <Call name="addConnector"> <Arg> <New class="org.mortbay.jetty.bio.SocketConnector"> <Set name="host"><SystemProperty name="jetty.host" default="0.0.0.0" /></Set> <Set name="port"><SystemProperty name="jetty.port" default="8983" /></Set> <Set name="maxIdleTime">50000</Set> <Set name="lowResourceMaxIdleTime">1500</Set> </New> </Arg> </Call> Where the only line changed from the default is this one: <Set name="host"><SystemProperty name="jetty.host" default="0.0.0.0" /></Set> And when I check netstat, I see this: $ netstat -an | egrep 'Proto|\b8983\b' Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 127.0.0.1:8983 0.0.0.0:* LISTEN tcp6 0 0 ::1:8983 :::* LISTEN Where Local Address should be 0.0.0.0:8983 instead of 127.0.0.1:8983. Does anyone know why this might not be working?

    Read the article

  • Passive mode FTP file download hangs from specific machine

    - by chiptuned
    I have a server which is an AWS instance that just cannot download files from a specific FTP server. I can connect to the FTP server fine and run some commands, but when I request a file it just hangs. Here is the debug output of the base linux ftp client after login: ---> SYST 215 UNIX Type: Apache FtpServer Remote system type is UNIX. ftp> get outgoing/catalog.gz catalog.gz local: catalog.gz remote: outgoing/catalog.gz ---> PASV 227 Entering Passive Mode (64,156,167,125,135,191) ---> RETR outgoing/catalog.gz 150 File status okay; about to open data connection. Thats it. Then it just sits there and nothing transfers. I have verified that a data connection is made but the client gets no data. ? ss -nt dst 64.156.167.125 State Recv-Q Send-Q Local Address:Port Peer Address:Port ESTAB 0 0 10.185.147.150:41190 64.156.167.125:21 ESTAB 0 0 10.185.147.150:48871 64.156.167.125:48557 The FTP server is not in my control and downloads from other FTP servers in passive mode have worked. Active mode does not work as the system is behind a firewall. Every FTP client I've tried has the same problem. The download works from other systems, even from other AWS instances I have with the same Security Group. Not necessarily the same distro or config though. I understand it may be some issue on the server side, but I want to know what it is about my particular machine where the transfer hangs and where on every other machine I can get my hands on, it works. Please let me know what the culprit on the client side could be or ideas on what else to look at.

    Read the article

  • whats wrong with the following code

    - by giri
    Hi i am trying to send sms to my mobile using java.When I run the application I am getting the the follwing error. package HelloWorld; import java.io.*; import java.util.BitSet; import javax.comm.*; import java.lang.*; public class SerialToGsm { InputStream in; OutputStream out; String lastIndexRead; String senderNum; String smsMsg; SerialToGsm(String porta) { try { // CommPortIdentifier portId = CommPortIdentifier.getPortIdentifier("serial0"); CommPortIdentifier portId = CommPortIdentifier.getPortIdentifier(porta); SerialPort sp = (SerialPort)portId.open("Sms_GSM", 0); sp.setSerialPortParams(9600, SerialPort.DATABITS_8, SerialPort.STOPBITS_1, SerialPort.PARITY_NONE); sp.setFlowControlMode(sp.FLOWCONTROL_NONE); in = sp.getInputStream(); out = sp.getOutputStream(); // modem reset sendAndRecv("+++AT", 30); // delay for 20 sec/10 sendAndRecv("AT&F", 30); sendAndRecv("ATE0", 30); // echo off sendAndRecv("AT +CMEE=1", 30); // verbose error messages sendAndRecv("AT+CMGF=0", 70); // set pdu mode // sendAndRecv("AT V1E0S0=0&D2&C1", 1000000); } catch (Exception e) { System.out.println("Exception " + e); System.exit(1); } } private String sendAndRecv(String s, int timeout) { try { // clean serial port input buffer in.skip(in.available()); System.out.println("=> " + s); s = s + "\r"; // add CR out.write(s.getBytes()); out.flush(); String strIn = new String(); for (int i = 0; i < timeout; i++){ int numChars = in.available(); if (numChars > 0) { byte[] bb = new byte[numChars]; in.read(bb,0,numChars); strIn += new String(bb); } // start exit conditions // --------------------- if (strIn.indexOf(">\r\n") != -1) { break; } if (strIn.indexOf("OK\r\n") != -1){ break; } if (strIn.indexOf("ERROR") != -1) { // if find 'error' wait for CR+LF if (strIn.indexOf("\r\n",strIn.indexOf("ERROR") + 1) != -1) { break; } } Thread.sleep(100); // delay 1/10 sec } System.out.println("<= " + strIn); if (strIn.length() == 0) { return "ERROR: len 0"; } return strIn; } catch (Exception e) { System.out.println("send e recv Exception " + e); return "ERROR: send e recv Exception"; } } public String sendSms (String numToSend, String whatToSend) { ComputSmsData sms = new ComputSmsData(); sms.setAsciiTxt(whatToSend); sms.setTelNum(numToSend); // sms.setSMSCTelNum("+393359609600"); // SC fixed String s = new String(); s = sendAndRecv("AT+CMGS=" + (sms.getCompletePduData().length() / 2) + "\r", 30); // System.out.println("==> AT+CMGS=" + (sms.getCompletePduData().length() / 2)); // System.out.println("<== " + s); if (s.indexOf(">") != -1) { // s = sendAndRecv(sms.getSMSCPduData() + sms.getCompletePduData() + "\u001A"); // usefull one day? // System.out.println("Inviero questo >>>> " + sms.getCompletePduData()); // if this sintax won't work try remove 00 prefix s = sendAndRecv("00" + sms.getCompletePduData() + "\u001A", 150); // System.out.println("<== " + s); return s; } else { return "ERROR"; } } // used to reset message data private void resetGsmObj() { lastIndexRead = null; senderNum = null; smsMsg = null; } public String checkSms (){ String str = new String(); String strGsm = new String(); strGsm = sendAndRecv("AT+CMGL=0", 30); // list unread msg and sign them as read // if answer contain ERROR then ERROR if (strGsm.indexOf("ERROR") != -1) { resetGsmObj(); return strGsm; // error } strGsm = sendAndRecv("AT+CMGL=1", 30); // list read msg // if answer contain ERROR then ERROR if (strGsm.indexOf("ERROR") != -1) { resetGsmObj(); return strGsm; // error } // evaluate message index if (strGsm.indexOf(':') <= 0) { resetGsmObj(); return ("ERROR unexpected answer"); } str = strGsm.substring(strGsm.indexOf(':') + 1,strGsm.indexOf(',')); str = str.trim(); // remove white spaces // System.out.println("Index: " + str); lastIndexRead = str; // find message string // ------------------- // look for start point (search \r, then skip \n, add and one more for right char int startPoint = strGsm.indexOf("\r",(strGsm.indexOf(":") + 1)) + 2; int endPoint = strGsm.indexOf("\r",startPoint + 1); if (endPoint == -1) { // only one message endPoint = strGsm.length(); } // extract string str = strGsm.substring(startPoint, endPoint); System.out.println("String to be decoded :" + str); ComputSmsData sms = new ComputSmsData(); sms.setRcvdPdu(str); // SMSCNum = new String(sms.getRcvdPduSMSC()); senderNum = new String(sms.getRcvdSenderNumber()); smsMsg = new String(sms.getRcvdPduTxt()); System.out.println("SMSC number: " + sms.getRcvdPduSMSC()); System.out.println("Sender number: " + sms.getRcvdSenderNumber()); System.out.println("Message: " + sms.getRcvdPduTxt()); return "OK"; } public String readSmsSender() { return senderNum; } public String readSms() { return smsMsg; } public String delSms() { if (lastIndexRead != "") { return sendAndRecv("AT+CMGD=" + lastIndexRead, 30); } return ("ERROR"); } } ERROR: Error loading SolarisSerial: java.lang.UnsatisfiedLinkError: no SolarisSerialParallel in java.library.path Caught java.lang.UnsatisfiedLinkError: com.sun.comm.SolarisDriver.readRegistrySerial(Ljava/util/Vector;Ljava/lang/String;)I while loading driver com.sun.comm.SolarisDriver Exception javax.comm.NoSuchPortException

    Read the article

  • Install GIMP 2.7.1 on Lucid Lynx using PPA

    - by Vivek
    GIMP lovers are going to be disappointed to hear that GIMP is going away in the next release of much awaited Ubuntu 10.04. Today we take a look at installing in on Lucid Lynx using PPA. The reason for getting rid of it as cited by the GIMP developers, is that GIMP is too professional a software to be included in regular desktop version of Ubuntu. And it takes up too much of space on the disk. Also, the fact that it’s too complicated for regular users. If you can’t live without it…let’s see how to install GIMP 2.7.1 on Lucid Lynx (Currently in Alpha). The new version of GIMP supports single window mode and we will also see how to enable this feature as well. First we need to add the official GIMP 2.7.1 PPA in the software sources of Ubuntu 10.04, by opening the terminal window and typing the following command: sudo sh -c “echo ‘deb http://ppa.launchpad.net/matthaeus123/mrw-gimp-svn/ubuntu lucid main’ >> /etc/apt/sources.list” Now that we have added the PPA we need to add the GPG key, so type the following in your Terminal window. sudo apt-key adv –recv-keys –keyserver keyserver.ubuntu.com 405A15CB Next up we have to update the software repository… sudo apt-get update All that is left is to install GIMP 2.7.1 by typing in the following… sudo apt-get install gimp Click ‘Y’ (for yes) to install GIMP Once GIMP is installed you can start it by going to Applications > Graphics > GNU Image Manipulation Program. You now have your favorite GIMP on your favorite Ubuntu 10.04. As you can see in the image below, GIMP still comes with default 3 windows, which could clog up your lower panel In Ubuntu 10.04. However, now you can run GIMP in single window mode by going to Windows > Single-Window mode. That’s all! Now you have your GIMP running in single window mode with less of hassle to manage 3 windows. It’s unfortunate that GIMP will not be included, but by following these instructions, you’ll be able to enjoy using it in Ubuntu 10.04. Similar Articles Productive Geek Tips Show the List of Installed Packages on Ubuntu or DebianHow to Install Windows Applications on Linux Using CrossoverInstall VMware Tools on Ubuntu Edgy EftInstall Adobe PDF Reader on Ubuntu EdgyInstall MySQL Server 4.1 on Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Stretch popurls.com with a Stylish Script (Firefox) OldTvShows.org – Find episodes of Hitchcock, Soaps, Game Shows and more Download Microsoft Office Help tab The Growth of Citibank Quickly Switch between Tabs in IE Windows Media Player 12: Tweak Video & Sound with Playback Enhancements

    Read the article

  • permission denied: /etc/apt/sources.list

    - by Eli
    I'm trying to install java jre, i usually do it like this sudo echo 'deb http://www.duinsoft.nl/pkg debs all' >> /etc/apt/sources.list sudo apt-key adv --keyserver keys.gnupg.net --recv-keys 5CB26B26 sudo apt-get update sudo apt-get install update-sun-jre exit but when i do sudo echo 'deb http://www.duinsoft.nl/pkg debs all' >> /etc/apt/sources.list i see permission denied: /etc/apt/sources.list When i do ls -l /etc/apt/sources.list i see -rw-r--r-- 1 root root 3360 Aug 26 01:45 /etc/apt/sources.list When i do sudo mv /etc/apt/sources.list /etc/apt/sources.list.old sudo cat /etc/apt/sources.list.old | sudo tee /etc/apt/sources.list i see #deb cdrom:[Ubuntu 12.04 LTS _Precise Pangolin_ - Release amd64 (20120425)]/ dists/precise/main/binary-i386/ #deb cdrom:[Ubuntu 12.04 LTS _Precise Pangolin_ - Release amd64 (20120425)]/ dists/precise/restricted/binary-i386/ #deb cdrom:[Ubuntu 12.04 LTS _Precise Pangolin_ - Release amd64 (20120425)]/ precise main restricted # See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to # newer versions of the distribution. deb http://lb.archive.ubuntu.com/ubuntu/ precise main restricted deb-src http://lb.archive.ubuntu.com/ubuntu/ precise main restricted ## Major bug fix updates produced after the final release of the ## distribution. deb http://lb.archive.ubuntu.com/ubuntu/ precise-updates main restricted deb-src http://lb.archive.ubuntu.com/ubuntu/ precise-updates main restricted ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team. Also, please note that software in universe WILL NOT receive any ## review or updates from the Ubuntu security team. deb http://lb.archive.ubuntu.com/ubuntu/ precise universe deb-src http://lb.archive.ubuntu.com/ubuntu/ precise universe deb http://lb.archive.ubuntu.com/ubuntu/ precise-updates universe deb-src http://lb.archive.ubuntu.com/ubuntu/ precise-updates universe ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team, and may not be under a free licence. Please satisfy yourself as to ## your rights to use the software. Also, please note that software in ## multiverse WILL NOT receive any review or updates from the Ubuntu ## security team. deb http://lb.archive.ubuntu.com/ubuntu/ precise multiverse deb-src http://lb.archive.ubuntu.com/ubuntu/ precise multiverse deb http://lb.archive.ubuntu.com/ubuntu/ precise-updates multiverse deb-src http://lb.archive.ubuntu.com/ubuntu/ precise-updates multiverse ## N.B. software from this repository may not have been tested as ## extensively as that contained in the main release, although it includes ## newer versions of some applications which may provide useful features. ## Also, please note that software in backports WILL NOT receive any review ## or updates from the Ubuntu security team. deb http://lb.archive.ubuntu.com/ubuntu/ precise-backports main restricted universe multiverse deb-src http://lb.archive.ubuntu.com/ubuntu/ precise-backports main restricted universe multiverse deb http://security.ubuntu.com/ubuntu precise-security main restricted deb-src http://security.ubuntu.com/ubuntu precise-security main restricted deb http://security.ubuntu.com/ubuntu precise-security universe deb-src http://security.ubuntu.com/ubuntu precise-security universe deb http://security.ubuntu.com/ubuntu precise-security multiverse deb-src http://security.ubuntu.com/ubuntu precise-security multiverse ## Uncomment the following two lines to add software from Canonical's ## 'partner' repository. ## This software is not part of Ubuntu, but is offered by Canonical and the ## respective vendors as a service to Ubuntu users. # deb http://archive.canonical.com/ubuntu precise partner # deb-src http://archive.canonical.com/ubuntu precise partner ## This software is not part of Ubuntu, but is offered by third-party ## developers who want to ship their latest software. deb http://extras.ubuntu.com/ubuntu precise main deb-src http://extras.ubuntu.com/ubuntu precise main and the issue is not solved, i still see that permission error, I'm on a 64 bit laptop

    Read the article

  • Make Python Socket Server More Efficient

    - by BenMills
    I have very little experience working with sockets and multithreaded programming so to learn more I decided to see if I could hack together a little python socket server to power a chat room. I ended up getting it working pretty well but then I noticed my server's CPU usage spiked up over 100% when I had it running in the background. Here is my code in full: http://gist.github.com/332132 I know this is a pretty open ended question so besides just helping with my code are there any good articles I could read that could help me learn more about this? My full code: import select import socket import sys import threading from daemon import Daemon class Server: def __init__(self): self.host = '' self.port = 9998 self.backlog = 5 self.size = 1024 self.server = None self.threads = [] self.send_count = 0 def open_socket(self): try: self.server = socket.socket(socket.AF_INET6, socket.SOCK_STREAM) self.server.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1) self.server.bind((self.host,self.port)) self.server.listen(5) print "Server Started..." except socket.error, (value,message): if self.server: self.server.close() print "Could not open socket: " + message sys.exit(1) def remove_thread(self, t): t.join() def send_to_children(self, msg): self.send_count = 0 for t in self.threads: t.send_msg(msg) print 'Sent to '+str(self.send_count)+" of "+str(len(self.threads)) def run(self): self.open_socket() input = [self.server,sys.stdin] running = 1 while running: inputready,outputready,exceptready = select.select(input,[],[]) for s in inputready: if s == self.server: # handle the server socket c = Client(self.server.accept(), self) c.start() self.threads.append(c) print "Num of clients: "+str(len(self.threads)) self.server.close() for c in self.threads: c.join() class Client(threading.Thread): def __init__(self,(client,address), server): threading.Thread.__init__(self) self.client = client self.address = address self.size = 1024 self.server = server self.running = True def send_msg(self, msg): if self.running: self.client.send(msg) self.server.send_count += 1 def run(self): while self.running: data = self.client.recv(self.size) if data: print data self.server.send_to_children(data) else: self.running = False self.server.threads.remove(self) self.client.close() """ Run Server """ class DaemonServer(Daemon): def run(self): s = Server() s.run() if __name__ == "__main__": d = DaemonServer('/var/servers/fserver.pid') if len(sys.argv) == 2: if 'start' == sys.argv[1]: d.start() elif 'stop' == sys.argv[1]: d.stop() elif 'restart' == sys.argv[1]: d.restart() else: print "Unknown command" sys.exit(2) sys.exit(0) else: print "usage: %s start|stop|restart" % sys.argv[0] sys.exit(2)

    Read the article

  • What is the best way to send structs containing enum values via sockets in C.

    - by Axel
    I've lots of different structs containing enum members that I have to transmit via TCP/IP. While the communication endpoints are on different operating systems (Windows XP and Linux) meaning different compilers (gcc 4.x.x and MSVC 2008) both program parts share the same header files with type declarations. For performance reasons, the structures should be transmitted directly (see code sample below) without expensively serializing or streaming the members inside. So the question is how to ensure that both compilers use the same internal memory representation for the enumeration members (i.e. both use 32-bit unsigned integers). Or if there is a better way to solve this problem... //type and enum declaration typedef enum { A = 1, B = 2, C = 3 } eParameter; typedef enum { READY = 400, RUNNING = 401, BLOCKED = 402 FINISHED = 403 } eState; #pragma pack(push,1) typedef struct { eParameter mParameter; eState mState; int32_t miSomeValue; uint8_t miAnotherValue; ... } tStateMessage; #pragma pack(pop) //... send via socket tStateMessage msg; send(iSocketFD,(void*)(&msg),sizeof(tStateMessage)); //... receive message on the other side tStateMessage msg_received; recv(iSocketFD,(void*)(&msg_received),sizeof(tStateMessage)); Additionally... Since both endpoints are little endian maschines, endianess is not a problem here. And the pack #pragma solves alignment issues satisfactorily. Thx for your answers, Axel

    Read the article

  • Python API for VirtualBox

    - by jessica
    I have made a command-line interface for virtualbox such that the virtualbox can be controlled from a remote machine. now I am trying to implement the commmand-line interface using python virtualbox api. For that I have downloaded the pyvb package (python api documentation shows functions that can be used for implementing this under pyvb package). but when I give pyvb.vb.VB.startVM(instance of VB class,pyvb.vm.vbVM) SERVER SIDE CODE IS from pyvb.constants import * from pyvb.vm import * from pyvb.vb import * import xpcom import pyvb import os import socket import threading class ClientThread ( threading.Thread ): # Override Thread's init method to accept the parameters needed: def init ( self, channel, details ): self.channel = channel self.details = details threading.Thread.__init__ ( self ) def run ( self ): print 'Received connection:', self.details [ 0 ] while 1: s= self.channel.recv ( 1024 ) if(s!='end'): if(s=='start'): v=VB() pyvb.vb.VB.startVM(v,pyvb.vm.vbVM) else: self.channel.close() break print 'Closed connection:', self.details [ 0 ] server = socket.socket ( socket.AF_INET, socket.SOCK_STREAM ) server.bind ( ( '127.0.0.1', 2897 ) ) server.listen ( 5 ) while True: channel, details = server.accept() ClientThread ( channel, details ).start() it shows an error Exception in thread Thread-1: Traceback (most recent call last): File "/usr/lib/python2.5/threading.py", line 486, in __bootstrap_inner self.run() File "news.py", line 27, in run pyvb.vb.VB.startVM(v,pyvb.vm.vbVM.getUUID(m)) File "/usr/lib/python2.5/site-packages/pyvb-0.0.2-py2.5.egg/pyvb/vb.py", line 65, in startVM cmd='%s %s'%(VB_COMMAND_STARTVM, vm.getUUID()) AttributeError: 'str' object has no attribute 'getUUID'

    Read the article

  • How to limit traffic using multicast over localhost

    - by Shane Holloway
    I'm using multicast UDP over localhost to implement a loose collection of cooperative programs running on a single machine. The following code works well on Mac OSX, Windows and linux. The flaw is that the code will receive UDP packets outside of the localhost network as well. For example, sendSock.sendto(pkt, ('192.168.0.25', 1600)) is received by my test machine when sent from another box on my network. import platform, time, socket, select addr = ("239.255.2.9", 1600) sendSock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM, socket.IPPROTO_UDP) sendSock.setsockopt(socket.IPPROTO_IP, socket.IP_MULTICAST_TTL, 24) sendSock.setsockopt(socket.IPPROTO_IP, socket.IP_MULTICAST_IF, socket.inet_aton("127.0.0.1")) recvSock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM, socket.IPPROTO_UDP) recvSock.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, True) if hasattr(socket, 'SO_REUSEPORT'): recvSock.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEPORT, True) recvSock.bind(("0.0.0.0", addr[1])) status = recvSock.setsockopt(socket.IPPROTO_IP, socket.IP_ADD_MEMBERSHIP, socket.inet_aton(addr[0]) + socket.inet_aton("127.0.0.1")); while 1: pkt = "Hello host: {1} time: {0}".format(time.ctime(), platform.node()) print "SEND to: {0} data: {1}".format(addr, pkt) r = sendSock.sendto(pkt, addr) while select.select([recvSock], [], [], 0)[0]: data, fromAddr = recvSock.recvfrom(1024) print "RECV from: {0} data: {1}".format(fromAddr, data) time.sleep(2) I've attempted to recvSock.bind(("127.0.0.1", addr[1])), but that prevents the socket from receiving any multicast traffic. Is there a proper way to configure recvSock to only accept multicast packets from the 127/24 network, or do I need to test the address of each received packet?

    Read the article

  • Decoding tcp packets using python

    - by mikip
    Hello I am trying to decode data received over a tcp connection. The packets are small, no more than 100 bytes. However when there is a lot of them I receive some of the the packets joined together. Is there a way to prevent this. I am using python I have tried to separate the packets, my source is below. The packets start with STX byte and end with ETX bytes, the byte following the STX is the packet length, (packet lengths less than 5 are invalid) the checksum is the last bytes before the ETX def decode(data): while True: start = data.find(STX) if start == -1: #no stx in message pkt = '' data = '' break #stx found , next byte is the length pktlen = ord(data[1]) #check message ends in ETX (pktken -1) or checksum invalid if pktlen < 5 or data[pktlen-1] != ETX or checksum_valid(data[start:pktlen]) == False: print "Invalid Pkt" data = data[start+1:] continue else: pkt = data[start:pktlen] data = data[pktlen:] break return data , pkt I use it like this #process reports try: data = sock.recv(256) except: continue else: while data: data, pkt = decode(data) if pkt: process(pkt) Also if there are multiple packets in the data stream, is it best to return the packets as a collection of lists or just return the first packet I am not that familiar with python, only C, is this method OK. Any advice would be most appreciated. Thanks in advance Thanks

    Read the article

< Previous Page | 6 7 8 9 10 11 12 13 14  | Next Page >