Search Results

Search found 298 results on 12 pages for 'ring'.

Page 10/12 | < Previous Page | 6 7 8 9 10 11 12  | Next Page >

• Linux DHCPD Mac-Address based Groups

  - by GruffTech

  Our Current DHCPD.conf looks like the following. subnet 10.0.32.0 netmask 255.255.255.0 { range 10.0.32.100 10.0.32.254; option subnet-mask 255.255.255.0; option broadcast-address 10.0.32.255; option domain-name-servers 208.67.222.222,208.67.220.220; option routers 10.0.32.5; host Dev-ABaird-W { hardware ethernet 00:1D:09:3E:49:13; fixed-address 10.0.32.94; } ... more static hosts .... } About as basic as it gets. The old router is 10.0.32.1, our company wanted to implement a squid proxy to better monitor web traffic while at work, and if necessary block large time-wasters, IE Facebook.com. However, we've quickly realized that this change has played a mean prank on our Polycom SIP Phones. Occasionally our phones will not ring, the end recipient hears ringing (this is artificially created by our PBX) however the handset never rings. The ONLY thing that has changed in our network is the option routers line. So, Since all Polycom MAC addresses begin with 00:04:F2 would it be possible in DHCP to say any 00:04:F2:::* MAC addresses get option routers 10.0.32.1, and anything else must talk with our Gateway?

  Read the article

• What was SPX from the IPX/SPX stack ever used for?

  - by Kumba

  Been trying to learn about older networking protocols a bit, and figured that I would start with IPX/SPX. So I built two MS-DOS virtual machines in VirtualBox, and got IPX communications working (after much trial and error). The idea being to get several old DOS games to run, link up to a multiplayer match, interact with each game window, and capture the traffic using Wireshark from the host machine. From this, I got Quake, Masters of Orion 2, and MechWarrior 2 to communicate back and forth. Doom, Doom2, Duke3d, Warcraft, and several others either buggered up under the VM or just couldn't see the other VM on the IPX network. What did I discover? None of the working games used SPX. Not even Microsoft's NET DIAG used SPX. They all ran ONLY on top of IPX. I can't even find SPX examples or use-cases of SPX traffic running over IEEE 802.3 Ethernet II framing. I did find references that it was in abundant use on token ring, but that's it. Yet any IPX-aware application that I've hunted down so far usually advertises itself as "IPX/SPX", which seems to be a bit of a misnomer, since it doesn't seem to use SPX. So what was SPX used for? Any DOS applications out there that use it which will run under my VM setup? Edit: I am aware that IPX is to SPX as IP is to TCP (layer 3 to layer 4), so I expected to see an SPX layer underneath the IPX layer in Wireshark when I ran my tests.

  Read the article

• [tcpdump] Proxy delegate refusing connexion ?

  - by simtris

  Hi guys, I'm a little disapointed ! My aim was to build a VERY simple smtp proxy under debian to handle mail from a port (51234) and forward it to the standard 25 port. I compile and install a "delegate" witch can handle easily that. It's working very well like that : delegated SERVER="smtp://anotherSmtpServer:25" -P51234 The strange thing is, it's working on my virtual test machine and on the dedicated server in local but I can't manage to use it trought internet. I test it like that. telnet [mySrv] 51234 Of course, no firewal, no deny host, no ined/xined, the service delegated is listening on the right port ... 2 clues : The port is answering trought internet with nmap as "51234/tcp open tcpwrapped" have a look at the tcpdump following : 22:50:54.864398 IP [myIp].1699 [mySrv].51234: S 2486749330:2486749330(0) win 65535 22:50:54.864449 IP [mySrv].51234 [myIp].1699: S 2486963525:2486963525(0) ack 2486749331 win 5840 22:50:54.948169 IP [myIp].1699 [mySrv].51234: . ack 1 win 64240 22:50:54.965134 IP [mySrv].43554 [myIp].auth: S 2485396968:2485396968(0) win 5840 22:50:55.243128 IP [myIp] [mySrv]: ICMP [myIp] tcp port auth unreachable, length 68 22:50:55.249646 IP [mySrv].51234 [myIp].1699: F 1:1(0) ack 1 win 46 22:50:55.309853 IP [myIp].1699 [mySrv].51234: . ack 2 win 64240 22:50:55.310126 IP [myIp].1699 [mySrv].51234: F 1:1(0) ack 2 win 64240 22:50:55.310137 IP [mySrv].51234 [myIp].1699: . ack 2 win 46 The part "auth" seems suspect to me but didn't ring a bell. I could certaily do with some help. Thx a lot !

  Read the article

• 2 Printers 1 Queue

  - by Shazburg

  My issue: When an order is processed, the same document needs to be printed on two printers. My proposed solution: Create a single queue in CUPS with a backend script that spits the job out to the two real printers queues. My problem: Documentation. Maybe I'm looking at every ring around the bullseye, but I can't find anything that lays out the rules for writing a CUPS backend script. In the end, I have several questions: Is there already an option to do this in CUPS that I've missed? The line I use to add my queue is "lpadmin -p MultiPass -E -v multipass -P Generic PostScript Printer". But DeviceURI is bad unless I specify a directory like "-v multipass:/tmp". Why is this? For testing, my script does nothing but capture ARGV and write it out to a text file one line per argument. Problem is, I'm getting nothing. Logs show the job as successful, but I'm pretty sure my meager attempt at a backend isn't even being run. I've tried to keep this question brief, so please ask for more info as I'm sure I've left out the most important part in all this. Honestly, I'm just done chasing my own tail. Thank you for your time.

  Read the article

• ixgbe driver: Limit the max number of cores

  - by Shellex Wai

  I have a Linux workstation with 48 cores and runs ixgbe driver for fiber interface. And I have to test a project name Netmap on it. NetMap is a high performance network framework for high speed interfaces, which has been ported to Linux recently. For some reasons, I must try it on the machine. So I compile it and follow the instructions to run the test problems, but it doesn't work. I check dmesg and it says: [10399.085736] 794.159015 netmap_set_ringid [486] ringid o4o1 set to all 48 HW RINGS [10399.085742] 794.282011 netmap_obj_malloc [220] netmap_if request size 816 too large I asked the author of netmap for help. He told me that I have too many cores in the machine and it should work if I tell ixgbe use less cores (2 to 4 is ok). I am not familiar to driver development and I don't know how to limit the ring numbers by passing arguments to ixgbe driver. So I check the spec from intel's website but found nothing about it. So I come here for more helps. Thank you.

  Read the article

• How should I deploy my JVM-based web application on ubuntu?

  - by Pieter Breed

  I've developed a web application using clojure/compojure (JVM based) and while developing I tested it using embedded jetty that runs on 0.0.0.0:8080. I would now like to deploy it to run on port 80 on ubuntu. I do dynamic virtual hosting, so any request for any host that arrives on port 80 should be handled by my application. The issues that worries me are: I can still run it embedded but I'm worried about running my app as root (needed for binding to port 80). I'm not sure if I can 'give up root' when in the JVM. Do I need to be concerned by this? besides, serving web applications is a known problem and I should be using known solutions for this (jetty or tomcat) but especially tomcat seems very heavy weight. Besides, I only have one application that listens to /* and does routing internally. (with compojure/ring). What I'm trying to say with this is that tomcat by default assigns WARs to subfolders which I don't want. So basically what I need is some very safe way of binding to port 80 on ubuntu that can with minimal interference send all requests to my app. Any ideas?

  Read the article

• How can I use my cell phone to establish a dial-up networking connection?

  - by gWiz

  I am using Windows 7 and have a BlackBerry with T-Mobile (U.S.). I have paired the phone with my computer over Bluetooth, which automatically creates a serial port for it. I am able to open the port in PuTTY and successfully issue AT commands to the modem, including dialing. However, while using Windows to create and establish a Dial-Up Networking connection, I get an error dialog stating "Error 678. The remote computer did not respond." In my testing, I also tried setting up a connection to dial a number connected to a phone. When attempting to connect over this connection, the phone does ring but the very moment I answer the call, my computer displays the above error dialog. What must be done to successfully establish such a PPP connection? Some special AT initialization string perhaps? To clarify, I'm not referring to the well-described and popular technique known as "tethering," in which the remote host of the data link is the mobile service provider. I am interested specifically in establishing direct data links with remote hosts other than my mobile service provider. Think old-school landline connection to your friend's computer or BBS. Edit 1 As grawity pointed out in comments, the missing piece of the puzzle is the actual modulator that is compatible with v-series protocols, which I expected to be built into the cellphone. So far the best only software alternative I could find is this experimental project. Edit 2 Found this forum discussion today. The participants state that there is no old-school modem in the BlackBerry. Edit 3 When I place a call in PuTTY with ATD, immediately after the call is answered (and the callee is initiating the handshake) the cellphone returns OK. This is not the expected behavior for establishing a data connection. The phone should reciprocate the handshake, and upon success return CONNECT. (Alternatively it should return BUSY or NO CARRIER, but never simply OK.) Windows DUN must be interpreting this as the "Error 678" I was seeing.

  Read the article

• "domain crashed" when creating new Xen instance

  - by user47650

  I have downloaded a Xen virtual machine image from the appscale project, and I am trying to start it up. However once I run the command; xm create -c -f xen.conf The instance immediately crashes and provides no console output. however it produces logs that I have posted below. but this is the error; [2011-03-01 12:34:03 xend.XendDomainInfo 3580] WARNING (XendDomainInfo:1178) Domain has crashed: name=appscale-1.4b id=10. I have managed to mount the root.img file locally and verify that it is actually an ext3 file system. I am running Xen 3.0.3 that is a stock RPM from the CentOS 5 repos; # rpm -qa | grep -i xen xen-libs-3.0.3-105.el5_5.5 xen-3.0.3-105.el5_5.5 xen-libs-3.0.3-105.el5_5.5 kernel-xen-2.6.18-194.32.1.el5 any suggestions on how to proceed with troubleshooting? (i am a newbie to Xen) so far I have enabled console logging, but the log file is empty. ==> domain-builder-ng.log <== xc_dom_allocate: cmdline=" ip=:1.2.3.4::::eth0:dhcp root=/dev/sda1 ro xencons=tty console=tty1 console=hvc0 debugger=y debug=y sync_console", features="" xc_dom_kernel_file: filename="/boot/vmlinuz-2.6.27-7-server" xc_dom_malloc_filemap : 2284 kB xc_dom_ramdisk_file: filename="/boot/initrd.img-2.6.27-7-server" xc_dom_malloc_filemap : 9005 kB xc_dom_boot_xen_init: ver 3.1, caps xen-3.0-x86_64 xen-3.0-x86_32p xc_dom_parse_image: called xc_dom_find_loader: trying ELF-generic loader ... failed xc_dom_find_loader: trying Linux bzImage loader ... xc_dom_malloc : 9875 kB xc_dom_do_gunzip: unzip ok, 0x234bb2 -> 0x9a4de0 OK elf_parse_binary: phdr: paddr=0x200000 memsz=0x447000 elf_parse_binary: phdr: paddr=0x647000 memsz=0xab888 elf_parse_binary: phdr: paddr=0x6f3000 memsz=0x908 elf_parse_binary: phdr: paddr=0x6f4000 memsz=0x1c2f9c elf_parse_binary: memory: 0x200000 -> 0x8b6f9c elf_xen_parse_note: GUEST_OS = "linux" elf_xen_parse_note: GUEST_VERSION = "2.6" elf_xen_parse_note: XEN_VERSION = "xen-3.0" elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000 elf_xen_parse_note: ENTRY = 0xffffffff8071e200 elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff80209000 elf_xen_parse_note: FEATURES = "!writable_page_tables|pae_pgdir_above_4gb" elf_xen_parse_note: PAE_MODE = "yes" elf_xen_parse_note: LOADER = "generic" elf_xen_parse_note: unknown xen elf note (0xd) elf_xen_parse_note: SUSPEND_CANCEL = 0x1 elf_xen_parse_note: HV_START_LOW = 0xffff800000000000 elf_xen_parse_note: PADDR_OFFSET = 0x0 elf_xen_addr_calc_check: addresses: virt_base = 0xffffffff80000000 elf_paddr_offset = 0x0 virt_offset = 0xffffffff80000000 virt_kstart = 0xffffffff80200000 virt_kend = 0xffffffff808b6f9c virt_entry = 0xffffffff8071e200 xc_dom_parse_elf_kernel: xen-3.0-x86_64: 0xffffffff80200000 -> 0xffffffff808b6f9c xc_dom_mem_init: mem 1024 MB, pages 0x40000 pages, 4k each xc_dom_mem_init: 0x40000 pages xc_dom_boot_mem_init: called x86_compat: guest xen-3.0-x86_64, address size 64 xc_dom_malloc : 2048 kB ==> xend.log <== [2011-03-01 12:34:01 xend.XendDomainInfo 3580] INFO (XendDomainInfo:2330) Dev 2049 still active, looping... [2011-03-01 12:34:01 xend.XendDomainInfo 3580] INFO (XendDomainInfo:2330) Dev 2049 still active, looping... [2011-03-01 12:34:01 xend.XendDomainInfo 3580] INFO (XendDomainInfo:2330) Dev 2049 still active, looping... [2011-03-01 12:34:01 xend.XendDomainInfo 3580] INFO (XendDomainInfo:2330) Dev 2049 still active, looping... [2011-03-01 12:34:01 xend.XendDomainInfo 3580] INFO (XendDomainInfo:957) Dev 0 still active, looping... [2011-03-01 12:34:01 xend.XendDomainInfo 3580] INFO (XendDomainInfo:957) Dev 0 still active, looping... [2011-03-01 12:34:01 xend.XendDomainInfo 3580] INFO (XendDomainInfo:957) Dev 0 still active, looping... [2011-03-01 12:34:02 xend.XendDomainInfo 3580] INFO (XendDomainInfo:957) Dev 0 still active, looping... [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:2114) UUID Created: True [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:2115) Devices to release: [], domid = 9 [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:2127) Releasing PVFB backend devices ... [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:207) XendDomainInfo.create(['domain', ['domid', 9], ['uuid', 'd5f22dd4-8dc2-f51f-84e9-eea7d71ea1d0'], ['vcpus', 1], ['vcpu_avail', 1], ['cpu_cap', 0], ['cpu_weight', 256], ['memory', 1024], ['shadow_memory', 0], ['maxmem', 1024], ['features', ''], ['name', 'appscale-1.4b'], ['on_poweroff', 'destroy'], ['on_reboot', 'restart'], ['on_crash', 'restart'], ['image', ['linux', ['kernel', '/boot/vmlinuz-2.6.27-7-server'], ['ramdisk', '/boot/initrd.img-2.6.27-7-server'], ['ip', ':1.2.3.4::::eth0:dhcp'], ['root', '/dev/sda1 ro'], ['args', 'xencons=tty console=tty1 console=hvc0 debugger=y debug=y sync_console']]], ['cpus', []], ['device', ['vif', ['backend', 0], ['script', 'vif-bridge'], ['mac', '00:16:3B:72:10:E4']]], ['device', ['vbd', ['backend', 0], ['dev', 'sda1:disk'], ['uname', 'file:/local/xen/domains/appscale1.4/root.img'], ['mode', 'w']]], ['state', '----c-'], ['shutdown_reason', 'crash'], ['cpu_time', 0.000339131], ['online_vcpus', 1], ['up_time', '0.952092885971'], ['start_time', '1299011639.92'], ['store_mfn', 1169289], ['console_mfn', 1169288]]) [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:329) parseConfig: config is ['domain', ['domid', 9], ['uuid', 'd5f22dd4-8dc2-f51f-84e9-eea7d71ea1d0'], ['vcpus', 1], ['vcpu_avail', 1], ['cpu_cap', 0], ['cpu_weight', 256], ['memory', 1024], ['shadow_memory', 0], ['maxmem', 1024], ['features', ''], ['name', 'appscale-1.4b'], ['on_poweroff', 'destroy'], ['on_reboot', 'restart'], ['on_crash', 'restart'], ['image', ['linux', ['kernel', '/boot/vmlinuz-2.6.27-7-server'], ['ramdisk', '/boot/initrd.img-2.6.27-7-server'], ['ip', ':1.2.3.4::::eth0:dhcp'], ['root', '/dev/sda1 ro'], ['args', 'xencons=tty console=tty1 console=hvc0 debugger=y debug=y sync_console']]], ['cpus', []], ['device', ['vif', ['backend', 0], ['script', 'vif-bridge'], ['mac', '00:16:3B:72:10:E4']]], ['device', ['vbd', ['backend', 0], ['dev', 'sda1:disk'], ['uname', 'file:/local/xen/domains/appscale1.4/root.img'], ['mode', 'w']]], ['state', '----c-'], ['shutdown_reason', 'crash'], ['cpu_time', 0.000339131], ['online_vcpus', 1], ['up_time', '0.952092885971'], ['start_time', '1299011639.92'], ['store_mfn', 1169289], ['console_mfn', 1169288]] [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:446) parseConfig: result is {'features': '', 'image': ['linux', ['kernel', '/boot/vmlinuz-2.6.27-7-server'], ['ramdisk', '/boot/initrd.img-2.6.27-7-server'], ['ip', ':1.2.3.4::::eth0:dhcp'], ['root', '/dev/sda1 ro'], ['args', 'xencons=tty console=tty1 console=hvc0 debugger=y debug=y sync_console']], 'cpus': [], 'vcpu_avail': 1, 'backend': [], 'uuid': 'd5f22dd4-8dc2-f51f-84e9-eea7d71ea1d0', 'on_reboot': 'restart', 'cpu_weight': 256.0, 'memory': 1024, 'cpu_cap': 0, 'localtime': None, 'timer_mode': None, 'start_time': 1299011639.9200001, 'on_poweroff': 'destroy', 'on_crash': 'restart', 'device': [('vif', ['vif', ['backend', 0], ['script', 'vif-bridge'], ['mac', '00:16:3B:72:10:E4']]), ('vbd', ['vbd', ['backend', 0], ['dev', 'sda1:disk'], ['uname', 'file:/local/xen/domains/appscale1.4/root.img'], ['mode', 'w']])], 'bootloader': None, 'maxmem': 1024, 'shadow_memory': 0, 'name': 'appscale-1.4b', 'bootloader_args': None, 'vcpus': 1, 'cpu': None} [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:1784) XendDomainInfo.construct: None [2011-03-01 12:34:02 xend 3580] DEBUG (balloon:145) Balloon: 3034420 KiB free; need 4096; done. [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:1953) XendDomainInfo.initDomain: 10 256.0 [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:1994) _initDomain:shadow_memory=0x0, maxmem=0x400, memory=0x400. [2011-03-01 12:34:02 xend 3580] DEBUG (balloon:145) Balloon: 3034412 KiB free; need 1048576; done. [2011-03-01 12:34:02 xend 3580] INFO (image:139) buildDomain os=linux dom=10 vcpus=1 [2011-03-01 12:34:02 xend 3580] DEBUG (image:208) domid = 10 [2011-03-01 12:34:02 xend 3580] DEBUG (image:209) memsize = 1024 [2011-03-01 12:34:02 xend 3580] DEBUG (image:210) image = /boot/vmlinuz-2.6.27-7-server [2011-03-01 12:34:02 xend 3580] DEBUG (image:211) store_evtchn = 1 [2011-03-01 12:34:02 xend 3580] DEBUG (image:212) console_evtchn = 2 [2011-03-01 12:34:02 xend 3580] DEBUG (image:213) cmdline = ip=:1.2.3.4::::eth0:dhcp root=/dev/sda1 ro xencons=tty console=tty1 console=hvc0 debugger=y debug=y sync_console [2011-03-01 12:34:02 xend 3580] DEBUG (image:214) ramdisk = /boot/initrd.img-2.6.27-7-server [2011-03-01 12:34:02 xend 3580] DEBUG (image:215) vcpus = 1 [2011-03-01 12:34:02 xend 3580] DEBUG (image:216) features = ==> domain-builder-ng.log <== xc_dom_build_image: called xc_dom_alloc_segment: kernel : 0xffffffff80200000 -> 0xffffffff808b7000 (pfn 0x200 + 0x6b7 pages) xc_dom_pfn_to_ptr: domU mapping: pfn 0x200+0x6b7 at 0x2aaaab5f6000 elf_load_binary: phdr 0 at 0x0x2aaaab5f6000 -> 0x0x2aaaaba3d000 elf_load_binary: phdr 1 at 0x0x2aaaaba3d000 -> 0x0x2aaaabae8888 elf_load_binary: phdr 2 at 0x0x2aaaabae9000 -> 0x0x2aaaabae9908 elf_load_binary: phdr 3 at 0x0x2aaaabaea000 -> 0x0x2aaaabb9a004 xc_dom_alloc_segment: ramdisk : 0xffffffff808b7000 -> 0xffffffff82382000 (pfn 0x8b7 + 0x1acb pages) xc_dom_malloc : 160 kB xc_dom_pfn_to_ptr: domU mapping: pfn 0x8b7+0x1acb at 0x2aaab0000000 xc_dom_do_gunzip: unzip ok, 0x8cb5e7 -> 0x1aca210 xc_dom_alloc_segment: phys2mach : 0xffffffff82382000 -> 0xffffffff82582000 (pfn 0x2382 + 0x200 pages) xc_dom_pfn_to_ptr: domU mapping: pfn 0x2382+0x200 at 0x2aaab1acb000 xc_dom_alloc_page : start info : 0xffffffff82582000 (pfn 0x2582) xc_dom_alloc_page : xenstore : 0xffffffff82583000 (pfn 0x2583) xc_dom_alloc_page : console : 0xffffffff82584000 (pfn 0x2584) nr_page_tables: 0x0000ffffffffffff/48: 0xffff000000000000 -> 0xffffffffffffffff, 1 table(s) nr_page_tables: 0x0000007fffffffff/39: 0xffffff8000000000 -> 0xffffffffffffffff, 1 table(s) nr_page_tables: 0x000000003fffffff/30: 0xffffffff80000000 -> 0xffffffffbfffffff, 1 table(s) nr_page_tables: 0x00000000001fffff/21: 0xffffffff80000000 -> 0xffffffff827fffff, 20 table(s) xc_dom_alloc_segment: page tables : 0xffffffff82585000 -> 0xffffffff8259c000 (pfn 0x2585 + 0x17 pages) xc_dom_pfn_to_ptr: domU mapping: pfn 0x2585+0x17 at 0x2aaab1ccb000 xc_dom_alloc_page : boot stack : 0xffffffff8259c000 (pfn 0x259c) xc_dom_build_image : virt_alloc_end : 0xffffffff8259d000 xc_dom_build_image : virt_pgtab_end : 0xffffffff82800000 xc_dom_boot_image: called arch_setup_bootearly: doing nothing xc_dom_compat_check: supported guest type: xen-3.0-x86_64 <= matches xc_dom_compat_check: supported guest type: xen-3.0-x86_32p xc_dom_update_guest_p2m: dst 64bit, pages 0x40000 clear_page: pfn 0x2584, mfn 0x11d788 clear_page: pfn 0x2583, mfn 0x11d789 xc_dom_pfn_to_ptr: domU mapping: pfn 0x2582+0x1 at 0x2aaab1ce2000 start_info_x86_64: called setup_hypercall_page: vaddr=0xffffffff80209000 pfn=0x209 domain builder memory footprint allocated malloc : 12139 kB anon mmap : 0 bytes mapped file mmap : 11289 kB domU mmap : 35 MB arch_setup_bootlate: shared_info: pfn 0x0, mfn 0xd6fe1 shared_info_x86_64: called vcpu_x86_64: called vcpu_x86_64: cr3: pfn 0x2585 mfn 0x11d787 launch_vm: called, ctxt=0x97b21f8 xc_dom_release: called ==> xend.log <== [2011-03-01 12:34:02 xend 3580] DEBUG (DevController:114) DevController: writing {'mac': '00:16:3B:72:10:E4', 'handle': '0', 'protocol': 'x86_64-abi', 'backend-id': '0', 'state': '1', 'backend': '/local/domain/0/backend/vif/10/0'} to /local/domain/10/device/vif/0. [2011-03-01 12:34:02 xend 3580] DEBUG (DevController:116) DevController: writing {'domain': 'appscale-1.4b', 'handle': '0', 'script': '/etc/xen/scripts/vif-bridge', 'state': '1', 'frontend': '/local/domain/10/device/vif/0', 'mac': '00:16:3B:72:10:E4', 'online': '1', 'frontend-id': '10'} to /local/domain/0/backend/vif/10/0. [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:634) Checking for duplicate for uname: /local/xen/domains/appscale1.4/root.img [file:/local/xen/domains/appscale1.4/root.img], dev: sda1:disk, mode: w [2011-03-01 12:34:02 xend 3580] DEBUG (blkif:27) exception looking up device number for sda1:disk: [Errno 2] No such file or directory: '/dev/sda1:disk' [2011-03-01 12:34:02 xend 3580] DEBUG (blkif:27) exception looking up device number for sda1: [Errno 2] No such file or directory: '/dev/sda1' [2011-03-01 12:34:02 xend 3580] DEBUG (DevController:114) DevController: writing {'virtual-device': '2049', 'device-type': 'disk', 'protocol': 'x86_64-abi', 'backend-id': '0', 'state': '1', 'backend': '/local/domain/0/backend/vbd/10/2049'} to /local/domain/10/device/vbd/2049. [2011-03-01 12:34:02 xend 3580] DEBUG (DevController:116) DevController: writing {'domain': 'appscale-1.4b', 'frontend': '/local/domain/10/device/vbd/2049', 'format': 'raw', 'dev': 'sda1', 'state': '1', 'params': '/local/xen/domains/appscale1.4/root.img', 'mode': 'w', 'online': '1', 'frontend-id': '10', 'type': 'file'} to /local/domain/0/backend/vbd/10/2049. [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:993) Storing VM details: {'shadow_memory': '0', 'uuid': 'd5f22dd4-8dc2-f51f-84e9-eea7d71ea1d0', 'on_reboot': 'restart', 'start_time': '1299011642.74', 'on_poweroff': 'destroy', 'name': 'appscale-1.4b', 'xend/restart_count': '0', 'vcpus': '1', 'vcpu_avail': '1', 'memory': '1024', 'on_crash': 'restart', 'image': "(linux (kernel /boot/vmlinuz-2.6.27-7-server) (ramdisk /boot/initrd.img-2.6.27-7-server) (ip :1.2.3.4::::eth0:dhcp) (root '/dev/sda1 ro') (args 'xencons=tty console=tty1 console=hvc0 debugger=y debug=y sync_console'))", 'maxmem': '1024'} [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:1028) Storing domain details: {'console/ring-ref': '1169288', 'console/port': '2', 'name': 'appscale-1.4b', 'console/limit': '1048576', 'vm': '/vm/d5f22dd4-8dc2-f51f-84e9-eea7d71ea1d0', 'domid': '10', 'cpu/0/availability': 'online', 'memory/target': '1048576', 'store/ring-ref': '1169289', 'store/port': '1'} [2011-03-01 12:34:02 xend 3580] DEBUG (DevController:158) Waiting for devices vif. [2011-03-01 12:34:02 xend 3580] DEBUG (DevController:164) Waiting for 0. [2011-03-01 12:34:02 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:1250) XendDomainInfo.handleShutdownWatch [2011-03-01 12:34:02 xend 3580] DEBUG (DevController:509) hotplugStatusCallback /local/domain/0/backend/vif/10/0/hotplug-status. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:509) hotplugStatusCallback /local/domain/0/backend/vif/10/0/hotplug-status. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:523) hotplugStatusCallback 1. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:158) Waiting for devices usb. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:158) Waiting for devices vbd. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:164) Waiting for 2049. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:509) hotplugStatusCallback /local/domain/0/backend/vbd/10/2049/hotplug-status. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:509) hotplugStatusCallback /local/domain/0/backend/vbd/10/2049/hotplug-status. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:523) hotplugStatusCallback 1. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:158) Waiting for devices irq. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:158) Waiting for devices vkbd. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:158) Waiting for devices vfb. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:158) Waiting for devices pci. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:158) Waiting for devices ioports. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:158) Waiting for devices tap. [2011-03-01 12:34:03 xend 3580] DEBUG (DevController:158) Waiting for devices vtpm. [2011-03-01 12:34:03 xend.XendDomainInfo 3580] WARNING (XendDomainInfo:1178) Domain has crashed: name=appscale-1.4b id=10. [2011-03-01 12:34:03 xend.XendDomainInfo 3580] ERROR (XendDomainInfo:2654) VM appscale-1.4b restarting too fast (2.275545 seconds since the last restart). Refusing to restart to avoid loops. [2011-03-01 12:34:03 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:2189) XendDomainInfo.destroy: domid=10 ==> xen-hotplug.log <== Nothing to flush. ==> xend.log <== [2011-03-01 12:34:03 xend.XendDomainInfo 3580] INFO (XendDomainInfo:2330) Dev 2049 still active, looping... [2011-03-01 12:34:03 xend.XendDomainInfo 3580] INFO (XendDomainInfo:2330) Dev 2049 still active, looping... [2011-03-01 12:34:03 xend.XendDomainInfo 3580] INFO (XendDomainInfo:2330) Dev 2049 still active, looping... [2011-03-01 12:34:03 xend.XendDomainInfo 3580] INFO (XendDomainInfo:2330) Dev 2049 still active, looping... [2011-03-01 12:34:03 xend.XendDomainInfo 3580] INFO (XendDomainInfo:2330) Dev 2049 still active, looping... [2011-03-01 12:34:03 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:2114) UUID Created: True [2011-03-01 12:34:03 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:2115) Devices to release: [], domid = 10 [2011-03-01 12:34:03 xend.XendDomainInfo 3580] DEBUG (XendDomainInfo:2127) Releasing PVFB backend devices ... And this is the xen.conf file that I am using; # cat xen.conf # Configuration file for the Xen instance AppScale, created # bn VMBuilder kernel = '/boot/vmlinuz-2.6.27-7-server' ramdisk = '/boot/initrd.img-2.6.27-7-server' memory = 1024 vcpus = 1 root = '/dev/sda1 ro' disk = [ 'file:/local/xen/domains/appscale1.4/root.img,sda1,w', ] name = 'appscale-1.4b' dhcp = 'dhcp' vif = [ 'mac=00:16:3B:72:10:E4' ] on_poweroff = 'destroy' on_reboot = 'restart' on_crash = 'restart' extra = 'xencons=tty console=tty1 console=hvc0 debugger=y debug=y sync_console'

  Read the article

• Silverlight Cream for March 17, 2010 -- #814

  - by Dave Campbell

  In this Issue: Tim Heuer(-2-), René Schulte(-2-), Bart Czernicki, Mark Monster, Pencho Popadiyn, Alex Golesh, Phil Middlemiss, and Yochay Kiriaty. Shoutouts: Check out the new themes, and Tim Heuer's poetry skills: SNEAK PEEK: New Silverlight application themes I learned to program Windows 3.1 from reading Charles Petzold's book, and here we are again: Free ebook: Programming Windows Phone 7 Series (DRAFT Preview) Here's a blog you're going to want to watch, and first up on the blog tonight is links to the complete set of MIX10 phone sessions: The Windows Phone Developer Blog First let me get a couple of things out of my system... "Holy Crap it's March 17th already" and "Holy Crap, we're all Windows Phone Developers!" I'm sure both of those were old news to anyone that's not been in a coma since Monday, but I've been a tad busy here at #MIX10. I'm not complainin' ... I'm just sayin' From SilverlightCream.com: Getting Started with Silverlight and Windows Phone 7 Development With any new Silverlight technology we have to begin with Tim Heuer... and this is Tim's announcement of Silverlight on the Windows Phone 7 Series ('cmon, can I call it a "Silverlight Phone"? ... please?) ... hope I didn't type that out loud :) ... so... in case you fell asleep Sunday, and just woke up, Tim let the dogs out on this and we could all talk about it. In all seriousness, bookmark this page... lots of good links. A guide to what has changed in the Silverlight 4 RC Continuing the 'bookmark this page' thought... Tim Heuer also has one up on what the heck is all in the Silverlight 4 RC they released on Monday... check this out... really good stuff in there... and a great post detailing it all. The Silverlight 4 Release Candidate René Schulte has a good post up detailing the new stuff in Silverlight 4 RC, with special attention paid to the webcam/mic and AsyncCaptureImage Let it ring - WriteableBitmapEx for Windows Phone René Schulte has a Windows Phone post up as well, introducing the WriteableBitmapEx library for Windows Phone... how cool is that?? Silverlight for Windows Phone 7 is NOT the same full Silverlight 3 RTM Bart Czernicki dug into the docs to expose some of the differences between Silverlight for the Windows Phone and Silverlight 3. If you've been developing in SL3 and want to also do Phone, check out this post and his resource listings. Trying to sketch a Windows Phone 7 application Mark Monster tried to SketchFlow a Windows Phone app and hit some problems... if anyone has thoughts, contribute on his blog page. Using Reactive Extensions in Silverlight – part 2 – Web Services Pencho Popadiyn has part 2 of his tutorial on Rx, and this one is concentrating on asynchronous service calls. Silverlight 4 Quick Tip: Out-Of-Browser Improvements This post from Alex Golesh is a little weird since he was sitting next to me in a session at MIX10 when he submitted it :) ... good update on what's new in OOB in the RC Turning a round button into a rounded panel I like Phil Middlemiss' other title for this post: "A Scalable Orb Panel-Button-Thingy" ... this is a very cool resizing button that works amazingly similar to the resizable skinned dialogs I did in Win32!... very cool, Phil! Go Get It – The Windows Phone Developer Training Kit Did you know there was a Windows Phone Training Kit with Hands-on Labs? Yochay Kiriaty at the Windows Phone Developer Blog wrote about it... I pulled it down, and it looks really good! Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• upgraded "Compiz' and "Unity", now no Unity 3D on screen

  - by user18432

  Today when I logged in to my Ubuntu 12.04, the update manager told me of some upgrades. Compiz and Unity were in those upgrades. After I installed the upgrades, I can no longer get the Unity panel on the left side of screen or the systray at the top of screen. I now have to run Ubuntu 12.04 with Unity 2D. My laptop is a HP Pavilion dv9000 with Nvidia GeForce Go 7600 video. I tried to run "unity --reset" but it says there are serious issues with compiz. I have cut & pasted the read out from the terminal below. [09:35:02] xxxxxxx@L01U1204:~$ unity --reset unity-panel-service: no process found Checking if settings need to be migrated ...no Checking if internal files need to be migrated ...no Backend : gconf Integration : true Profile : unity Adding plugins Initializing core options...done compiz (core) - Warn: failed to receive ConfigureNotify event on 0x2e00004 compiz (core) - Warn: failed to receive ConfigureNotify event on 0x580005a compiz (core) - Warn: failed to receive ConfigureNotify event on 0x3600006 compiz (core) - Warn: failed to receive ConfigureNotify event on 0x3200255 compiz (core) - Warn: failed to receive ConfigureNotify event on 0x1600002 compiz (core) - Warn: failed to receive ConfigureNotify event on 0x1400002 Initializing composite options...done Initializing opengl options...done Initializing decor options...done Initializing vpswitch options...done Initializing snap options...done Initializing mousepoll options...done Initializing resize options...done Initializing place options...done Initializing move options...done Initializing wall options...done Initializing grid options...done I/O warning : failed to load external entity "/home/brwright/.compiz/session/10afaca1703486b216133648409481824100000130110002" Initializing session options...done Initializing gnomecompat options...done Initializing animation options...done Initializing fade options...done Initializing unitymtgrabhandles options...done Initializing workarounds options...done Initializing scale options...done compiz (expo) - Warn: failed to bind image to texture Initializing expo options...done Initializing ezoom options...done compiz (core) - Error: Couldn't load plugin '/usr/lib/compiz/libunityshell.so' : /usr/lib/compiz/libunityshell.so: undefined symbol: _ZNK5unity4dash10Controller6windowEv compiz (core) - Error: Couldn't load plugin 'unityshell' compiz (core) - Warn: unhandled ConfigureNotify on 0x7000090! compiz (core) - Warn: this should never happen. you should probably file a bug about this. compiz (core) - Warn: unhandled ConfigureNotify on 0x7000093! compiz (core) - Warn: this should never happen. you should probably file a bug about this. compiz (core) - Warn: unhandled ConfigureNotify on 0x7000096! compiz (core) - Warn: this should never happen. you should probably file a bug about this. compiz (core) - Warn: unhandled ConfigureNotify on 0x7000099! compiz (core) - Warn: this should never happen. you should probably file a bug about this. compiz (core) - Warn: unhandled ConfigureNotify on 0x700009c! compiz (core) - Warn: this should never happen. you should probably file a bug about this. compiz (core) - Warn: unhandled ConfigureNotify on 0x700009f! compiz (core) - Warn: this should never happen. you should probably file a bug about this. Initializing annotate options...done Initializing blur options...done Initializing clone options...done Initializing colorfilter options...done Initializing commands options...done Initializing cube options...done Initializing imgjpeg options...done Initializing kdecompat options...done Initializing mag options...done Initializing neg options...done Initializing obs options...done Initializing opacify options...done Initializing put options...done Initializing resizeinfo options...done Initializing ring options...done Initializing rotate options...done Initializing scaleaddon options...done Initializing screenshot options...done Initializing shift options...done Initializing staticswitcher options...done Initializing switcher options...done Initializing thumbnail options...done Initializing unityshell options...done Initializing water options...done Initializing winrules options...done Initializing wobbly options...done Setting Update "main_menu_key" Setting Update "run_key" Starting gtk-window-decorator As you can see the terminal never comes back to the CI prompt. I must do a control C to get to the CI prompt, but then the OS is frozen. I have to reboot and run Unity 2D in able to do anything on my laptop. I hope I have explained this enough and provided some useful info. I am at a loss to understand what the problem is, or what exactly what is causing the problem. Is it Unity or Compiz? Can anyone help?

  Read the article

• no launcher, no dash, no unity, how to get back to my desktop?

  - by Numan Syed

  FYI, I have tried these, but none worked as of yet! Please help! I must not want to reinstall Ubuntu precise: AskUbuntu:Unity Launcher missing AskUbuntu: Unity doesn't load Youtube:Restore missing launcher AskUbuntu:Unity 3D no longer works! Is there any other way to find a solution, any help is highly appreciated! Please do ask for any further info u may need to point me to a better direction. Edit: I have still the opportunity to use ctrl+Alt+T for the terminal. And from there I used firefox & to get the browser on. Edit 2: Tried to find more; found more explained situation http://askubuntu.com/q/260578/176470. Edit 3:@Adithya: tried that no luck! Here is what my terminal gave me so far... [1447:22] (~) bash $ unity --reset WARNING: Unity currently default profile, so switching to metacity while resetting the values unity-panel-service: no process found Checking if settings need to be migrated ...no Checking if internal files need to be migrated ...no Backend : gconf Integration : true Profile : unity Adding plugins Initializing core options...done compiz (core) - Warn: failed to receive ConfigureNotify event on 0x1600004 compiz (core) - Warn: failed to receive ConfigureNotify event on 0x30000b8 compiz (core) - Warn: failed to receive ConfigureNotify event on 0x2c00fc1 Initializing composite options...done Initializing opengl options...done Initializing decor options...done Initializing vpswitch options...done Initializing snap options...done Initializing mousepoll options...done Initializing resize options...done Initializing place options...done Initializing move options...done Initializing wall options...done Initializing grid options...done Initializing session options...done Initializing gnomecompat options...done Initializing animation options...done Initializing fade options...done compiz (core) - Error: Couldn't load plugin '/usr/lib/compiz/libunitymtgrabhandles.so' : /usr/lib/compiz/libunitymtgrabhandles.so: undefined symbol: _ZN10CompOption7setNameEPKcNS_4TypeE compiz (core) - Error: Couldn't load plugin 'unitymtgrabhandles' Initializing workarounds options...done Initializing scale options...done compiz (expo) - Warn: failed to bind image to texture Initializing expo options...done Initializing ezoom options...done compiz (core) - Error: Couldn't load plugin '/usr/lib/compiz/libunityshell.so' : /usr/lib/compiz/libunityshell.so: undefined symbol: _ZN10CompOption7setNameEPKcNS_4TypeE compiz (core) - Error: Couldn't load plugin 'unityshell' compiz (core) - Warn: unhandled ConfigureNotify on 0xc000a0! compiz (core) - Warn: this should never happen. you should probably file a bug about this. compiz (core) - Warn: unhandled ConfigureNotify on 0xc000a3! compiz (core) - Warn: this should never happen. you should probably file a bug about this. compiz (core) - Warn: unhandled ConfigureNotify on 0xc000a6! compiz (core) - Warn: this should never happen. you should probably file a bug about this. Initializing addhelper options...done Initializing animationaddon options...done Initializing annotate options...done Initializing bench options...done Initializing blur options...done Initializing clone options...done Initializing colorfilter options...done Initializing commands options...done Initializing crashhandler options...done Initializing cube options...done Initializing cubeaddon options...done Initializing extrawm options...done Initializing fadedesktop options...done Initializing firepaint options...done Initializing group options...done Initializing imgjpeg options...done Initializing kdecompat options...done Initializing loginout options...done Initializing mag options...done Initializing maximumize options...done Initializing mblur options...done Initializing neg options...done Initializing notification options...done Initializing obs options...done Initializing opacify options...done Initializing put options...done Initializing reflex options...done Initializing resizeinfo options...done Initializing ring options...done Initializing rotate options...done Initializing scaleaddon options...done Initializing scalefilter options...done Initializing screenshot options...done Initializing shelf options...done Initializing shift options...done Initializing showdesktop options...done Initializing showmouse options...done Initializing splash options...done Initializing staticswitcher options...done Initializing switcher options...done Initializing td options...done Initializing thumbnail options...done Initializing trailfocus options...done Initializing unitymtgrabhandles options...done Initializing unityshell options...done Initializing wallpaper options...done Initializing water options...done Initializing widget options...done Initializing winrules options...done Initializing wobbly options...done Setting Update "main_menu_key" Setting Update "run_key" Anything suspicious herein?

  Read the article

• User interfirance, themes, Broken, Unreadable parts

  - by Adames

  Arther going on a customizing spree my the desktop themes on unity got messed up I had installed Ubuntu tweak and unsettings so I removed them but the default themes and custom ones are still messed up I ran unity --reset and this is what I get: WARNING: Unity currently default profile, so switching to metacity while resetting the values unity-panel-service: no process found Checking if settings need to be migrated ...no Checking if internal files need to be migrated ...no Backend : gconf Integration : true Profile : unity Adding plugins Initializing core options...done compiz (core) - Warn: failed to receive ConfigureNotify event on 0x1200004 compiz (core) - Warn: failed to receive ConfigureNotify event on 0x38000af compiz (core) - Warn: failed to receive ConfigureNotify event on 0x32000ad Initializing composite options...done Initializing opengl options...done Initializing decor options...done Initializing vpswitch options...done Initializing snap options...done Initializing mousepoll options...done Initializing resize options...done Initializing place options...done Initializing move options...done Initializing wall options...done Initializing grid options...done Initializing session options...done Initializing gnomecompat options...done Initializing animation options...done Initializing fade options...done Initializing unitymtgrabhandles options...done Initializing workarounds options...done Initializing scale options...done compiz (expo) - Warn: failed to bind image to texture Initializing expo options...done Initializing ezoom options...done (compiz:4749): GConf-CRITICAL **: gconf_client_add_dir: assertion `gconf_valid_key (dirname, NULL)' failed Initializing unityshell options...done compiz (core) - Warn: unhandled ConfigureNotify on 0xc0009e! compiz (core) - Warn: this should never happen. you should probably file a bug about this. compiz (core) - Warn: unhandled ConfigureNotify on 0xc000a1! compiz (core) - Warn: this should never happen. you should probably file a bug about this. compiz (core) - Warn: unhandled ConfigureNotify on 0xc000a1! compiz (core) - Warn: this should never happen. you should probably file a bug about this. compiz (core) - Warn: unhandled ConfigureNotify on 0xc000a4! compiz (core) - Warn: this should never happen. you should probably file a bug about this. WARN 2012-07-02 19:51:42 unity.libindicator <unknown>:0 Desktop file '/usr/share/applications/google-chrome.desktop' is using a deprecated format for its actions that will be dropped soon. WARN 2012-07-02 19:51:42 unity.libindicator <unknown>:0 Desktop file '/usr/share/applications/firefox.desktop' is using a deprecated format for its actions that will be dropped soon. WARN 2012-07-02 19:51:42 unity.libindicator <unknown>:0 Desktop file '/usr/share/applications/libreoffice-writer.desktop' is using a deprecated format for its actions that will be dropped soon. WARN 2012-07-02 19:51:42 unity.libindicator <unknown>:0 Desktop file '/usr/share/applications/libreoffice-calc.desktop' is using a deprecated format for its actions that will be dropped soon. WARN 2012-07-02 19:51:42 unity.libindicator <unknown>:0 Desktop file '/usr/share/applications/libreoffice-impress.desktop' is using a deprecated format for its actions that will be dropped soon. Initializing addhelper options...done Initializing animationaddon options...done Initializing annotate options...done Initializing bench options...done Initializing blur options...done Initializing clone options...done Initializing colorfilter options...done Initializing commands options...done Initializing crashhandler options...done Initializing cube options...done Initializing cubeaddon options...done Initializing extrawm options...done Initializing fadedesktop options...done Initializing firepaint options...done Initializing group options...done Initializing imgjpeg options...done Initializing kdecompat options...done Initializing loginout options...done Initializing mag options...done Initializing maximumize options...done Initializing mblur options...done Initializing neg options...done Initializing notification options...done Initializing obs options...done Initializing opacify options...done Initializing put options...done Initializing reflex options...done Initializing resizeinfo options...done Initializing ring options...done Initializing rotate options...done Initializing scaleaddon options...done Initializing scalefilter options...done Initializing screenshot options...done Initializing shelf options...done Initializing shift options...done Initializing showdesktop options...done Initializing showmouse options...done Initializing splash options...done Initializing staticswitcher options...done Initializing switcher options...done Initializing td options...done Initializing thumbnail options...done Initializing trailfocus options...done Initializing wallpaper options...done Initializing water options...done Initializing widget options...done Initializing winrules options...done Initializing wobbly options...done ERROR 2012-07-02 19:51:43 unity.glib-gobject <unknown>:0 g_object_unref: assertion `G_IS_OBJECT (object)' failed Setting Update "main_menu_key" Setting Update "run_key" Setting Update "autoraise" Setting Update "autoraise_delay" Any Ideas? this is very inconvenient some of the text like in additional drivers are unreadable because they come out White

  Read the article

• SQL Authority News – Presenting at SQL Bangalore on May 3, 2014 – Performing an Effective Presentation

  - by Pinal Dave

  SQL Bangalore is a wonderful community and we always have a great response when we present on technology. It is SQL User Group and we discuss everything SQL there. This month we have SQL Server 2014 theme and we are going to have a community launch on this subject. We have the best of the best speakers presenting on SQL Server 2014 technology. Looking at the whole line of celebrity speakers, I have decided not to present on SQL Server. I will be presenting on the performance tuning subject, but with the twist of soft skills. I will be presenting on “Performing an Effective Presentation“. Trust me, you do not want to miss this presentation, I will be presenting on how to present effectively when presenting SQL Server topics. What this session will NOT have I personally believe that we all are good presenters most of the time. We can all easily call out if someone is bad presenter. There is no point talking about basics like bigger bullet points, talk loudly, talk with confidence, use better analogies etc. In simple words – this is not going to some philosophy session and boring notes. What this session will have Well, this session will tell stories of my life. It will tell how we can present about technology and SQL Server with the help of stories and personal experience. I am going to tell stories about two legends  who have inspired me. Right after that we will be doing two exercises together where we will learn quickly and effectively, how to become better speaker – instantly! There is no video recording of this session. If you want to get resources from this session, please sign up my newsletter at http://bit.ly/sqllearn Here are few of the slides from this presentation: Here is the details about the event and location Venue:Microsoft Corporation, Signature Building,Embassy Golf Links Business Park, Intermediate Ring Road, Domlur, Bangalore – 560071 The agenda is amazing – we have top line SQL Speakers. Everyone is welcome and don’t forget to get your friend along for this event. Loads to learn and tons to share !!! Keynote (20 mins) by Anupam Tiwari – Business Program Manager – GTSC Backup Enhancements with SQL Server 2014 by Amit Banerjee – PFE Microsoft Performance Enhancements with SQL Server 2014 by Sourabh Agarwal - PFE Microsoft LUNCH BREAK Performing an effective Presentation by Pinal Dave – Community Member (SQLAuthority.com) InMemory Enhancements with SQL Server 2014 by Balmukund Lakhani – Support Escalation Engg. Microsoft Some more lesser known enhancements with SQL Server 2014 by Vinod Kumar – Technical Architect Microsoft MTC Power Packed – Power BI with SQL Server by Kane Conway – Support Escalation Engg. Microsoft I am very big fan of Amit, Balmukund and Vinod – I have always watched their session and this time, I am going to once again attend their session without missing a single min. They are SQL legends, I am going to be there and learn when they are sharing their knowledge.  Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, T SQL

  Read the article

• Walkthrough: Scheduling jobs using Quartz.net &ndash; Part 1: What is Quartz.Net?

  - by Tarun Arora

  Quartz.NET is a full-featured, open source enterprise job scheduling system written in .NET platform that can be used from smallest apps to large scale enterprise systems. What is the problem that we trying to address? I want to schedule the execution of a task but only when something happens. Let’s call that something a trigger, so... if the trigger is met => execute the task. Sounds simple, why not use windows task scheduler for this? Well, windows task scheduler is great for tasks where the trigger can be easily defined. With windows task scheduler will you be able to schedule a task to run on every working day according to the UK calendar (exclude all weekends & bank holidays) without either writing the logic for day check in the task or a wrapper script calling into the task. The task should just contain the execution logic and should not have anything to do with the schedule for execution; Quartz.net allows you to achieve this and lots more. A quartz.net trigger gives you the flexibility for task invocation based on the following triggers, 1. at a certain time of day (to the millisecond) 2. on certain days of the week 3. on certain days of the month 4. on certain days of the year 5. not on certain days listed within a registered Calendar (such as business holidays) 6. repeated a specific number of times 7. repeated until a specific time/date 8. repeated indefinitely 9. repeated with a delay interval Did 8 – repeat indefinitely just ring a bell? I’ll be covering that in the future post. Using Quartz.net as a windows service You can have Quartz.net run as a standalone instance within its own .NET virtual machine instance via .NET Remoting. Let’s take a look at typical application architecture. In the figure below, I have the application tier set up on Machine 1, database set up on Machine 2 and Quartz.net set up on Machine 3 which is normally the architecture for most (if not all) enterprise applications. Figure 1 -  Typical Application architecture while using Quartz.net as a windows service What other options do I have if I don’t want to use Quartz.net? Quartz.net is just one of the many job scheduling services. Have a look at this comprehensive list of free and paid enterprise job scheduling software along with their feature comparison. http://en.wikipedia.org/wiki/List_of_job_scheduler_software This was first in the series of posts on enterprise scheduling using Quartz.net, in the next post I’ll be covering how to Install Quartz.net as a windows service. Thank you for taking the time out and reading this blog post. If you enjoyed the post, remember to subscribe to http://feeds.feedburner.com/TarunArora. Stay tuned!

  Read the article

• Gomoku array-based AI-algorithm?

  - by Lasse V. Karlsen

  Way way back (think 20+ years) I encountered a Gomoku game source code in a magazine that I typed in for my computer and had a lot of fun with. The game was difficult to win against, but the core algorithm for the computer AI was really simply and didn't account for a lot of code. I wonder if anyone knows this algorithm and has some links to some source or theory about it. The things I remember was that it basically allocated an array that covered the entire board. Then, whenever I, or it, placed a piece, it would add a number of weights to all locations on the board that the piece would possibly impact. For instance (note that the weights are definitely wrong as I don't remember those): 1 1 1 2 2 2 3 3 3 444 1234X4321 3 3 3 2 2 2 1 1 1 Then it simply scanned the array for an open location with the lowest or highest value. Things I'm fuzzy on: Perhaps it had two arrays, one for me and one for itself and there was a min/max weighting? There might've been more to the algorithm, but at its core it was basically an array and weighted numbers Does this ring a bell with anyone at all? Anyone got anything that would help?

  Read the article

• Ericsson f3507g WWAN (3G Broadband) and AT commands

  - by JD

  I have a lenovo x200t tablet with WWAN built into it. I'm trying to connect to the internet using AT commands and a C# program which I am making so that the program can connect to the net and upload information on demand. I don't want to use Lenovo's "Access Connections" as it is too complicated for the end user. So far I have been able to use terminal to turn the card on and off, ring landlines and send SMS messages. However I can't seem to access the internet using it. I could access the net through it before I removed "Access Connections" software/bloatware. The commands I am using to try and access the net are: Connect on COM7 to the modem Send initialisation string "AT+CFUN=1" Send AT*ENAP=1,1 as suggested here (http://www.thinkwiki.org/wiki/Ericsson%5FF3507g%5FMobile%5FBroadband%5FModule) Windows says it is "Identifying" the network and a yellow exclamation mark appears on the networking icon in the task bar, but the connection fails and drops off. An IP is assigned to the "Local Area Connection 2" of 169.254.1.192 with a subnet of 255.255.0.0 - no gateway or DNS. Definately no net connection... Anyone got any ideas?

  Read the article

• C# TCP Async EndReceive() throws InvalidOperationException ONLY on Windows XP 32-bit

  - by James Farmer

  I have a simple C# Async Client using a .NET socket that waits for timed messages from a local Java server used for automating commands. The messages come in asynchronously and is written to a ring buffer. This implementation seems to work fine on Windows Vista/7/8 and OSX, but will randomly throw this exception while it's receiving a message from the local Java server: Unhandled Exception: System.InvalidOperationException: EndReceive can only be called once for each asynchronous operation.     at System.Net.Sockets.Socket.EndReceive(IAsyncResult asyncResult, SocketError& errorCode)     at System.Net.Sockets.Socket.EndReceive(IAsyncResult asyncResult)     at SocketTest.Controller.RecvAsyncCallback(IAsyncResult ar)     at System.Net.LazyAsyncResult.Complete(IntPtr userToken)     ... I've looked online for this error, but have found nothing really helpful. This is the code where it seems to break: /// <summary> /// Callback to receive socket data /// </summary> /// <param name="ar">AsyncResult to pass to End</param> private void RecvAsyncCallback(IAsyncResult ar) { // The exception will randomly happen on this call int bytes = _socket.EndReceive(_recvAsyncResult); // check for connection closed if (bytes == 0) { return; } _ringBuffer.Write(_buffer, 0, bytes); // Checks buffer CheckBuffer(); _recvAsyncResult = _sock.BeginReceive(_buffer, 0, _buffer.Length, SocketFlags.None, RecvAsyncCallback, null); } The error doesn't happen on any particular moment except in the middle of receiving a message. The message itself can be any length for this to happen, and the exception can happen right away, or sometimes even up to a minute of perfect communication. I'm pretty new with sockets and network communication, and I feel I might be missing something here. I've tested on at least 8 different computers, and the only similarity with the computers that throw this exception is that their OS is Windows XP 32-bit.

  Read the article

• Instantiating class with custom allocator in shared memory

  - by recipriversexclusion

  I'm pulling my hair due to the following problem: I am following the example given in boost.interprocess documentation to instantiate a fixed-size ring buffer buffer class that I wrote in shared memory. The skeleton constructor for my class is: template<typename ItemType, class Allocator > SharedMemoryBuffer<ItemType, Allocator>::SharedMemoryBuffer( unsigned long capacity ){ m_capacity = capacity; // Create the buffer nodes. m_start_ptr = this->allocator->allocate(); // allocate first buffer node BufferNode* ptr = m_start_ptr; for( int i = 0 ; i < this->capacity()-1; i++ ) { BufferNode* p = this->allocator->allocate(); // allocate a buffer node } } My first question: Does this sort of allocation guarantee that the buffer nodes are allocated in contiguous memory locations, i.e. when I try to access the n'th node from address m_start_ptr + n*sizeof(BufferNode) in my Read() method would it work? If not, what's a better way to keep the nodes, creating a linked list? My test harness is the following: // Define an STL compatible allocator of ints that allocates from the managed_shared_memory. // This allocator will allow placing containers in the segment typedef allocator<int, managed_shared_memory::segment_manager> ShmemAllocator; //Alias a vector that uses the previous STL-like allocator so that allocates //its values from the segment typedef SharedMemoryBuffer<int, ShmemAllocator> MyBuf; int main(int argc, char *argv[]) { shared_memory_object::remove("MySharedMemory"); //Create a new segment with given name and size managed_shared_memory segment(create_only, "MySharedMemory", 65536); //Initialize shared memory STL-compatible allocator const ShmemAllocator alloc_inst (segment.get_segment_manager()); //Construct a buffer named "MyBuffer" in shared memory with argument alloc_inst MyBuf *pBuf = segment.construct<MyBuf>("MyBuffer")(100, alloc_inst); } This gives me all kinds of compilation errors related to templates for the last statement. What am I doing wrong?

  Read the article

• Mysterious socket / HttpWebRequest timeouts

  - by Daniel Mošmondor

  I have a great app for capturing shoutcast streams :-) . So far, it worked with a charm on dozens of machines, and never exhibited behaviour I found now, which is ultimately very strange. I use HttpWebRequest to connect to the shoutcast server and when I connect two streams, everything's OK. When I go for third one, response = (HttpWebResponse)request.GetResponse(); throws with Connection Timeout exception. WTF? I must point out that I had to create .config for the application in order to allow my headers to be sent out from the application, otherwise it wouldn't work at all. Here it is: <?xml version="1.0" encoding="utf-8" ?> <configuration> <system.net> <settings> <httpWebRequest useUnsafeHeaderParsing = "true" /> </settings> </system.net> </configuration> Does any of this ring a bell?

  Read the article

• scheme struct question

  - by qzar

  ;; definition of the structure "book" ;; author: string - the author of the book ;; title: string - the title of the book ;; genre: symbol - the genre (define-struct book (author title genre)) (define lotr1 (make-book "John R. R. Tolkien" "The Fellowship of the Ring" 'Fantasy)) (define glory (make-book "David Brin" "Glory Season" 'ScienceFiction)) (define firstFamily (make-book "David Baldacci" "First Family" 'Thriller)) (define some-books (list lotr1 glory firstFamily)) ;; count-books-for-genre: symbol (list of books) -> number ;; the procedure takes a symbol and a list of books and produces the number ;; of books from the given symbol and genre ;; example: (count-books-for-genre 'Fantasy some-books) should produce 1 (define (count-books-for-genre genre lob) (if (empty? lob) 0 (if (symbol=? (book-genre (first lob)) genre) (+ 1 (count-books-for-genre (rest lob) genre)) (count-books-for-genre (rest lob) genre) ) ) ) (count-books-for-genre 'Fantasy some-books) It produce following exception first: expected argument of type non-empty list; given 'Fantasy, I don't understand whats the problem. Can somebody give me some explanation ? Thank you very much !

  Read the article

• How to minimize total cost of shortest path tree

  - by Michael

  I have a directed acyclic graph with positive edge-weights. It has a single source and a set of targets (vertices furthest from the source). I find the shortest paths from the source to each target. Some of these paths overlap. What I want is a shortest path tree which minimizes the total sum of weights over all edges. For example, consider two of the targets. Given all edge weights equal, if they share a single shortest path for most of their length, then that is preferable to two mostly non-overlapping shortest paths (fewer edges in the tree equals lower overall cost). Another example: two paths are non-overlapping for a small part of their length, with high cost for the non-overlapping paths, but low cost for the long shared path (low combined cost). On the other hand, two paths are non-overlapping for most of their length, with low costs for the non-overlapping paths, but high cost for the short shared path (also, low combined cost). There are many combinations. I want to find solutions with the lowest overall cost, given all the shortest paths from source to target. Does this ring any bells with anyone? Can anyone point me to relevant algorithms or analogous applications? Cheers!

  Read the article

• Internal "Tee" setup

  - by RadlyEel

  I have inherited some really old VC6.0 code that I am upgrading to VS2008 for building a 64-bit app. One required feature that was implemented long, long ago is overriding std::cout so its output goes simultaneously to a console window and to a file. The implementation depended on the then-current VC98 library implementation of ostream and, of course, is now irretrievably broken with VS2008. It would be reasonable to accumulate all the output until program termination time and then dump it to a file. I got part of the way home by using freopen(), setvbuf(), and ios::sync_with_stdio(), but to my dismay, the internal library does not treat its buffer as a ring buffer; instead when it flushes to the output device it restarts at the beginning, so every flush wipes out all my accumulated output. Converting to a more standard logging function is not desirable, as there are over 1600 usages of "std::cout << " scattered throughout almost 60 files. I have considered overriding ostream's operator<< function, but I'm not sure if that will cover me, since there are global operator<< functions that can't be overridden. (Or can they?) Any ideas on how to accomplish this?

  Read the article

• Crosshairs in Java

  - by typoknig

  I am making a game that needs a crosshair. I have been playing with the java.awt.cursor class and that is easy enough, but the problem is that I do not want the crosshairs to be able to leave the window I create for my game, so I tried this instead: private void drawCrossHair(Graphics g){ Ellipse2D ellipse = new Ellipse2D.Float(); ellipse.setFrame(crossHair.x, crossHair.y, 36, 36); Color yellow = new Color (0xEDFF62); g.setColor(yellow); g.fillOval(crossHair.x, crossHair.y, 40, 40); g.setClip(ellipse); g.clip(ellipse); Basically I am trying to remove the "ellipse" from "g" leaving only a small ring behind. The problem here is that "g.clip(ellipse);" gives me an error. My objective with this code is to create a circle with a transparent center, like a donut. Once the donut is created I will add some small points on the inside of it so it looks more like crosshairs. One thing that may or may not be an issue is that I plan on moving the crosshairs with a joystick, not a mouse... I do not know if that will limit my options for what kind of object my crosshairs can be.

  Read the article

• Why does one of these statements compile in Scala but not the other?

  - by Jeff

  (Note: I'm using Scala 2.7.7 here, not 2.8). I'm doing something pretty simple -- creating a map based on the values in a simple, 2-column CSV file -- and I've completed it easily enough, but I'm perplexed at why my first attempt didn't compile. Here's the code: // Returns Iterator[String] private def getLines = Source.fromFile(csvFilePath).getLines // This doesn't compile: def mapping: Map[String,String] = { Map(getLines map { line: String => val pairArr = line.split(",") pairArr(0) -> pairArr(1).trim() }.toList:_*) } // This DOES compile def mapping: Map[String,String] = { def strPair(line: String): (String,String) = { val pairArr = line.split(",") pairArr(0) -> pairArr(1).trim() } Map(getLines.map( strPair(_) ).toList:_*) } The compiler error is CsvReader.scala:16: error: value toList is not a member of (St ring) = (java.lang.String, java.lang.String) [scalac] possible cause: maybe a semicolon is missing before `value toList'? [scalac] }.toList:_*) [scalac] ^ [scalac] one error found So what gives? They seem like they should be equivalent to me, apart from the explicit function definition (vs. anonymous in the nonworking example) and () vs. {}. If I replace the curly braces with parentheses in the nonworking example, the error is "';' expected, but 'val' found." But if I remove the local variable definition and split the string twice AND use parens instead of curly braces, it compiles. Can someone explain this difference to me, preferably with a link to Scala docs explaining the difference between parens and curly braces when used to surround method arguments?

  Read the article

• Optimizing a shared buffer in a producer/consumer multithreaded environment

  - by Etan

  I have some project where I have a single producer thread which writes events into a buffer, and an additional single consumer thread which takes events from the buffer. My goal is to optimize this thing for a single machine to achieve maximum throughput. Currently, I am using some simple lock-free ring buffer (lock-free is possible since I have only one consumer and one producer thread and therefore the pointers are only updated by a single thread). #define BUF_SIZE 32768 struct buf_t { volatile int writepos; volatile void * buffer[BUF_SIZE]; volatile int readpos;) }; void produce (buf_t *b, void * e) { int next = (b->writepos+1) % BUF_SIZE; while (b->readpos == next); // queue is full. wait b->buffer[b->writepos] = e; b->writepos = next; } void * consume (buf_t *b) { while (b->readpos == b->writepos); // nothing to consume. wait int next = (b->readpos+1) % BUF_SIZE; void * res = b->buffer[b->readpos]; b->readpos = next; return res; } buf_t *alloc () { buf_t *b = (buf_t *)malloc(sizeof(buf_t)); b->writepos = 0; b->readpos = 0; return b; } However, this implementation is not yet fast enough and should be optimized further. I've tried with different BUF_SIZE values and got some speed-up. Additionaly, I've moved writepos before the buffer and readpos after the buffer to ensure that both variables are on different cache lines which resulted also in some speed. What I need is a speedup of about 400 %. Do you have any ideas how I could achieve this using things like padding etc?

  Read the article

< Previous Page | 6 7 8 9 10 11 12  | Next Page >