Search Results

Search found 314 results on 13 pages for 'unload'.

Page 10/13 | < Previous Page | 6 7 8 9 10 11 12 13  | Next Page >

  • What is the best way to implement collision detection using Bullet physics engine and a track generated from a curve?

    - by tigrou
    I am developing a small racing game were the track is generated from a curve. As said above, the track is generated, but not infinite. The track of one level could fit with no problem in memory and will contain a reasonably small amount of triangles. For collisions, I would like to use Bullet physics engine and know what is the best way to handle collisions with the track efficiently. NOTE : The track will be stored as a static rigid body (mass = 0). The player will be represented by a sphere shape for collisions. Here is some possibilities i have in mind : Create one rigid body, then, put all triangles of the track (except non collidable stuff) into it. Result : 1 body with many triangles (eg : 30000 triangles) Split the track into several sections (eg: 10 sections). Then, for each section, create a rigid body and put corresponding triangles in it. Result : small amount of bodies with relatively small amount of triangles (eg : 1500 triangles per section). Split the track into many sub-sections (eg : 1200 sections). Here one subsection = very small step when generating the curve. Again for each sub-section, create a body and put triangles in it. Result : many bodies with very small amount of triangles (eg : 20 triangles). Advantage : it could be possible to "extra data" to each of the subsection, that could be used when handling collisions. Same as 2, but only put sections N and N+1 in physics engine (where N = current section where the player is). When player reach section N+1, unload section N and load section N+2 and so on... Issue : harder to implement, problems if the player suddenly "jump" from one section to another (eg : player fly away from section N, and fall on section N + 4 that was underneath : no collision handled, player will fall into void ) Same as 4, but with many sub-sections. Issues : since subsections are very small there will be constantly new bodies added and removed to physics engine at runtime. Possibilities for player to accidently skip some sections and fall into the void are higher than 4.

    Read the article

  • NSclient++ NRPE issues

    - by Kyle
    I have had NSclient++ working with Nagios for a while now. Recently I started testing Nagwin just to see how it would work, out of pure curiosity. I stopped checking a test server with my main Nagios config, set NSclient++ to NRPE mode, and pointed Nagwin at it. It worked great for a few hours then suddenly I started seeing "UNKNOWN: No Handler for that command." I figured it has to be Nagwin's fault since it's so new, I'll just unload NRPElistner.dll and return my server to being monitored by check_NT. However now check_NT doesn't work my main Nagios server returns timeout errors and is unable to connect at all. My Nagwin server can connect to it, the server just doesn't know how to handle the check_NRPE commands even though it did with no changes a few hours earlier. I have been working on this for a day now and am fairly certain it is NSclient++ who is to blame here. My nagwin box has successfully stayed connected to a similar server throughout the night, without any issues. And my main Nagios config is not having any problems at all. I have been able to successfully switch another server between being monitored by nagios and nagwin without any problems by simply loading and unloading the NRPE.dll. I have tried uninstalling NSclient++ and reinstalling with fresh configuration but still receive the errors. As of now the firewall is off on the server, NSclient++ is setup to accept connection from any server, there is no password, I have also turned ssl off, and the NRPE module is loaded. Any Ideas would be appreciated, I am not an advanced Nagios user but I do know my way around it and can easily break it down and set it up again. I also want to add that while in test mode NSclient++ is unable to handle check_NRPE commands there either.

    Read the article

  • kvm works only when kvm-intel is unloaded

    - by Sathya
    I am new to kvm. I have this strange issue. But before explaining the issue, here is my set up. I try to install VM on my Host which is a Acer Laptop 5720 Has T7500 Intel processor. The cpu flags indicate that Virtualization is supported. I run Ubuntu 10.04 (lucid) on it. It comes with kvm. Now coming to the issue - I dont get any errors while executing "sudo modprobe kvm-intel". So I presume my processor does indeed support hardware virtualization. I use virt-manager and create a VM on which I install ubuntu from an *.iso file. When I start the VM it says it is running. No signs of any trouble. I can see the domain list in "virsh list". But when I try to connect to the VM thru VNC, all I get to see is a blank screen (no cursor). There is no response to any key press. I changed the video mode etc. Tried all different combinations but none work. But strangely, if I shutdown the vm an virt-manager and then unload the module by doing "sudo modprove -r kvm-intel", everything works fine. ie., I can see the screen via VNC. I am able to install the OS and so on. So what does this mean ? IS hardware virtualization not supported ? How come there is no error anywhere ? dmesg | grep kvm doesnt report anything. Can someone throw light on what excatly is happening ?

    Read the article

  • Failed to open the Parallels networking module

    - by user49204
    I'm running Parallels Desktop 7 on OSX Lion and encounter the issue in the subject on every time I'm trying to launch Parallels VM. The error message contains a hint to restore to network configuration default which does not help. As been advised by some forums to ran the following script: sudo kextutil "/Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_hypervisor.kext" sudo kextutil "/Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_hid_hook.kext" sudo kextutil "/Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_usb_connect.kext" sudo kextutil "/Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_netbridge.kext" sudo kextutil "/Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_vnic.kext" The output of: sudo kextutil "/Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_netbridge.kext" is: Diagnostics for /Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_netbridge.kext: Warnings: The booter does not recognize symbolic links; confirm these files/directories aren't needed for startup: /Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_netbridge.kext/Contents/CodeDirectory /Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_netbridge.kext/Contents/CodeRequirements /Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_netbridge.kext/Contents/CodeResources /Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_netbridge.kext/Contents/CodeSignature Dependency Resolution Failures: No kexts found for these libraries: com.parallels.kext.prl_hypervisor I've noticed that prl_netbridge is not being loaded (when I'm trying to unload it, I'm notified it is not loaded). Am I doing something wrong? What can be the reason for such behaviour?

    Read the article

  • Umount stale glusterfs partition

    - by Khaled
    I am using glusterfs on several Ubuntu servers: two of them are running glusterfs servers in replication mode. Without any clear error, the glusterfs partition became stale and the system shows this error when I try to access the stale partition: Transport endpoint is not connected Also, when running ls -l on the parent folder I get: d????????? ? ? ? ? ? myfolder I tried all types of commands that I can find to umount this partition, but I could not get it done: umount -l /path/to/mount/point umount -f /path/to/mount/point Also, using fuser command to show processes accessing this folder did not work. Unload the fuse kernel module can not be done as it is clear from the kernel config that fuse is built into the kernel and not a loadable module. I found this line in /boot/config-2.6.32-24-server CONFIG_FUSE_FS=y I have been left with two options: Reboot the system. Create another mount point like myfolder2 and mount this again using sudo glusterfs -f /etc/glustefs/glusterfs.vol /path/to/folder2. Of course, I have chosen to go with option 2. Anyone faced such an issue before? Anyone has a better solution for such a case?

    Read the article

  • Formatting an external HDD stuck at 70%

    - by mahmood
    My external HDD which is a 250GB WD (powered by USB) seems to have problem! Whenever i try to copy some files, it stuck while copying. I decided to format it. So I used windows tool and performed the format (not quickly) however at nearly 70% it stuck. Then I decided to perform a low level format with lowlevel. Again it stuck at 70%. I endup that the HDD has bad sector. So is there any tool that mark the bad sectors and bypass them? It is not very reasonable to through 250GB because of some bad sectors! P.S: I saw a similar topic but there were no conclusion there either. The smart data is Attribute, raw value, value, threshold, status Read Error Rate, 50, 200, 51, OK Spin-Up Time, 3275, 154, 21, OK Start/Stop Count, 2729, 98, 0, OK Reallocated Sectors Count,0, 200, 140, OK Seek Error Rate, 0, 100, 51, OK Power-On Hours (POH), 1057, 99, 0, OK Spin Retry Count, 0, 100, 51, OK Recalibration Retries ,0, 100, 51 , OK Power Cycle Count, 1385, 99, 0, OK Power-off Retract Count, 425, 200, 0, OK Load /Unload Cycle Count,12974, 196, 0, OK Temperature, 43, 43, 0, OK Reallocation Event Count,0, 200, 0, OK Current Pending Sector Count,23,200, 0, Degradation Uncorrectable Sector Count, 0, 100, 0, OK UltraDMA CRC Error Count,6, 200, 0, OK Write Error Rate/Multi-Zone Error Rate,0,100,51, OK It seems that the most important thing is this line Current Pending Sector Count,23,200, 0, Degradation Any idea on that?

    Read the article

  • Computer sending data while turned off

    - by Nicklas Ansman
    I have a some what strange problem (which could have and easy and obvious solution for all I know). My problem is that when I've booted ubuntu (now 10.4 but same problem with 9.10) and turns it off it starts sending a HUGE amount of data via the ethernet cable, so much in fact that my router can't handle it and stops responding. As far as I can tell the computer is completely turned off with no fans spinning. I can add that if I boot windows I do not have this problem, just when exiting ubuntu. There are two "fixes" for my problem: Pull the ethernet cable until the next boot Turn off power to the PSU and wait for the capacitors to unload Is there anyone who knows what could be going on? I'd be happy to post some logs or conf-files. Currently I'm using the ethernet port on my motherboard which is a Asus P6T Deluxe V2 with an updated version of the BIOS (maybe not the latest but since it only happens when I've been in ubuntu I don't wanna mess with the BIOS too much). Regards Nicklas ---------Update 1---------- The router is a D-Link DIR 655 with the latest firmware. ---------Update 2---------- I've now reinstalled ubuntu (with 10.4) and I still experience the same problem.

    Read the article

  • quickly close all word and excel

    - by dyenatha
    Suppose I open 10 Word files and 10 Excel files and make no changes, how do I quickly taskkill all at once? Because I must repeat several attempts to replicate race, I'm hoping for a command-line solution. I'm willing to try PowerShell and cygwin (1.5) if necessary. The OS is Windows XP SP3 with current patches (still IE7). I tried "taskkill /pid 1 /pid 2 /t" where 1 is PID of EXCEL.EXE and 2 is PID of WINWORD.EXE, but it closed only 1 window of each program. I'm trying to replicate a race where an add-in for Microsoft Office 2007 fails to exclusive-lock one of its own files, which caused the 2nd Office program to stop exiting with a warning: System.IO.IOException: The process cannot access the file 'C:\Documents and Settings\me\Application Data\ExpensiveProduct\Add-InForMicrosoftOffice\4.2\egcred' because it is being used by another process. at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath) at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy) at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options) at System.IO.StreamWriter.CreateFile(String path, Boolean append) at System.IO.StreamWriter..ctor(String path, Boolean append, Encoding encoding, Int32 bufferSize) at System.IO.StreamWriter..ctor(String path, Boolean append, Encoding encoding) at System.IO.File.WriteAllText(String path, String contents, Encoding encoding) at ExpensiveProduct.EG.DataAccess.Credentials.CredentialManager.SaveUserTable() at ExpensiveProduct.OfficeAddin.OfficeAddinBase.Dispose(Boolean disposing) at ExpensiveProduct.OfficeAddin.WordAddin.Dispose(Boolean disposing) at ExpensiveProduct.OfficeAddin.OfficeAddinBase.OnHostShutdown() at ExpensiveProduct.OfficeAddin.OfficeAddinBase.Unload(ext_DisconnectMode mode)

    Read the article

  • Quickly close all Word and Excel instances?

    - by dyenatha
    Suppose I open 10 Word files and 10 Excel files and make no changes, how do I quickly taskkill all at once? Because I must repeat several attempts to replicate race, I'm hoping for a command-line solution. I'm willing to try PowerShell and cygwin (1.5) if necessary. The OS is Windows XP SP3 with current patches (still IE7). I tried "taskkill /pid 1 /pid 2 /t" where 1 is PID of EXCEL.EXE and 2 is PID of WINWORD.EXE, but it closed only 1 window of each program. I'm trying to replicate a race where an add-in for Microsoft Office 2007 fails to exclusive-lock one of its own files, which caused the 2nd Office program to stop exiting with a warning: System.IO.IOException: The process cannot access the file 'C:\Documents and Settings\me\Application Data\ExpensiveProduct\Add-InForMicrosoftOffice\4.2\egcred' because it is being used by another process. at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath) at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy) at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options) at System.IO.StreamWriter.CreateFile(String path, Boolean append) at System.IO.StreamWriter..ctor(String path, Boolean append, Encoding encoding, Int32 bufferSize) at System.IO.StreamWriter..ctor(String path, Boolean append, Encoding encoding) at System.IO.File.WriteAllText(String path, String contents, Encoding encoding) at ExpensiveProduct.EG.DataAccess.Credentials.CredentialManager.SaveUserTable() at ExpensiveProduct.OfficeAddin.OfficeAddinBase.Dispose(Boolean disposing) at ExpensiveProduct.OfficeAddin.WordAddin.Dispose(Boolean disposing) at ExpensiveProduct.OfficeAddin.OfficeAddinBase.OnHostShutdown() at ExpensiveProduct.OfficeAddin.OfficeAddinBase.Unload(ext_DisconnectMode mode)

    Read the article

  • Who should I run mysql as, on a personal computer?

    - by user664833
    I just installed mysql via homebrew (with brew install mysql, on Mac OS X Mountain Lion - recently installed from scratch). Following the installation, there is a "caveats" section with options around further necessary actions to take: ==> Caveats Set up databases to run AS YOUR USER ACCOUNT with: unset TMPDIR mysql_install_db --verbose --user=`whoami` --basedir="$(brew --prefix mysql)" --datadir=/usr/local/var/mysql --tmpdir=/tmp To set up base tables in another folder, or use a different user to run mysqld, view the help for mysqld_install_db: mysql_install_db --help and view the MySQL documentation: * http://dev.mysql.com/doc/refman/5.5/en/mysql-install-db.html * http://dev.mysql.com/doc/refman/5.5/en/default-privileges.html To run as, for instance, user "mysql", you may need to `sudo`: sudo mysql_install_db ...options... Start mysqld manually with: mysql.server start Note: if this fails, you probably forgot to run the first two steps up above A "/etc/my.cnf" from another install may interfere with a Homebrew-built server starting up correctly. To connect: mysql -uroot To launch on startup: * if this is your first install: mkdir -p ~/Library/LaunchAgents cp /usr/local/Cellar/mysql/5.5.27/homebrew.mxcl.mysql.plist ~/Library/LaunchAgents/ launchctl load -w ~/Library/LaunchAgents/homebrew.mxcl.mysql.plist * if this is an upgrade and you already have the homebrew.mxcl.mysql.plist loaded: launchctl unload -w ~/Library/LaunchAgents/homebrew.mxcl.mysql.plist cp /usr/local/Cellar/mysql/5.5.27/homebrew.mxcl.mysql.plist ~/Library/LaunchAgents/ launchctl load -w ~/Library/LaunchAgents/homebrew.mxcl.mysql.plist You may also need to edit the plist to use the correct "UserName". On previous versions of Mac OS X I ran mysql as mysql user, but now I am confronted by the idea of running it as myself. I am the only one who uses this computer (which happens to be my laptop), and I do programming for work and for pleasure. What are the pros & cons, or best practices, around choosing whether to run mysql AS YOUR USER ACCOUNT or as mysql or something else still?

    Read the article

  • MySQL Memory Limit Windows Server 2003

    - by Matt
    I am running MySQL 5.0.51a on Windows Server 2003 Standard Edition on an HP DL580 G4 with 3GB installed. One of my database tables has grown to 5.3 GB with an index file of 2.5 GB, which I believe is causing MySQL to be slow due to having to constantly load and unload the index file when updates are made to the table. The server itself seems to be performing OK because MySQL is only using about 500MB of memory (there are other apps running on the system, but MySQL uses the most memory). The table is fairly active with new records getting adding all during day but no deletes, ever. The MySQL server has up to 600 connections allowed, but only small number (10 or 20) would actually be writing to this table. I increased the memory limits in MySQL but since the max connections is so high I don't think I can give each connection 1GB without risking a problem. Is there some tuning that would let just certain connections get a lot of memory? So I have started to look for alternatives to avert the crisis I know is coming soon. Some of the options I have: Upgrade to Server 2003 Enterprise to install 64GB of memory. Question: would 32 bit MySQL be able to access more than 2GB? Would that be 2GB per thread? That would still be smaller than the index table size so it might not solve the problem completely, but it would be better than now. Upgrade to Server 200x 64 bit and MySQL 64 bit. Switch to a *nix 64 bit server. If anybody has suggestions for things to do in the meantime, opinions on which way to go, or other things that I have overlooked I would appreciate the help. Thanks

    Read the article

  • Getting windows virtio mounted/installed for KVM

    - by Swifty
    There might be an easy answer to this. I have exhausted my search on google for a solution. Here's my problem. I need to get Windows working on a KVM vps with virtualizor CP. As I get into windows installation in VNC, there's the mandatory driver installation requirement, as HDD is in virtio. There seems to be 2 solutions: 1. Mount the virtio iso (http://alt.fedoraproject.org/pub/alt/virtio-win/latest/images/bin/) in the CD drive by unmounting Windows ISO and proceed with driver installation. 2. Create a secondary CD drive and mount the virtio iso there. Well, 1st step never seems to work. If I unload the Windows iso and load the virtio iso, it never reflects back in the VNC. Second step I have yet to be successfull. I try to create a second IDE CD ROM drive via virt-manager but the virtio (virtio-win-0.1-30.iso) iso is never listed in there, whereas i specially placed it in /var/lib/libvirt/images folder. Any suggestions on where I screwed up?

    Read the article

  • EXCEL VBA STUDENTS DATABASE [on hold]

    - by BENTET
    I AM DEVELOPING AN EXCEL DATABASE TO RECORD STUDENTS DETAILS. THE HEADINGS OF THE TABLE ARE DATE,YEAR, PAYMENT SLIP NO.,STUDENT NUMBER,NAME,FEES,AMOUNT PAID, BALANCE AND PREVIOUS BALANCE. I HAVE BEEN ABLE TO PUT UP SOME CODE WHICH IS WORKING, BUT THERE ARE SOME SETBACKS THAT I WANT TO BE ADDRESSED.I ACTUALLY DEVELOPED A USERFORM FOR EACH PROGRAMME OF THE INSTITUTION AND ASSIGNED EACH TO A SPECIFIC SHEET BUT WHENEVER I ADD A RECORD, IT DOES NOT GO TO THE ASSIGNED SHEET BUT GOES TO THE ACTIVE SHEET.ALSO I WANT TO HIDE ALL SHEETS AND BE WORKING ONLY ON THE USERFORMS WHEN THE WORKBOOK IS OPENED.ONE PROBLEM AM ALSO FACING IS THE UPDATE CODE.WHENEVER I UPDATE A RECORD ON A SPECIFIC ROW, IT RATHER EDIT THE RECORD ON THE FIRST ROW NOT THE RECORD EDITED.THIS IS THE CODE I HAVE BUILT SO FAR.I AM VIRTUALLY A NOVICE IN PROGRAMMING. Private Sub cmdAdd_Click() Dim lastrow As Long lastrow = Sheets("Sheet4").Range("A" & Rows.Count).End(xlUp).Row Cells(lastrow + 1, "A").Value = txtDate.Text Cells(lastrow + 1, "B").Value = ComBox1.Text Cells(lastrow + 1, "C").Value = txtSlipNo.Text Cells(lastrow + 1, "D").Value = txtStudentNum.Text Cells(lastrow + 1, "E").Value = txtName.Text Cells(lastrow + 1, "F").Value = txtFees.Text Cells(lastrow + 1, "G").Value = txtAmountPaid.Text txtDate.Text = "" ComBox1.Text = "" txtSlipNo.Text = "" txtStudentNum.Text = "" txtName.Text = "" txtFees.Text = "" txtAmountPaid.Text = "" End Sub Private Sub cmdClear_Click() txtDate.Text = "" ComBox1.Text = "" txtSlipNo.Text = "" txtStudentNum.Text = "" txtName.Text = "" txtFees.Text = "" txtAmountPaid.Text = "" txtBalance.Text = "" End Sub Private Sub cmdClearD_Click() txtDate.Text = "" ComBox1.Text = "" txtSlipNo.Text = "" txtStudentNum.Text = "" txtName.Text = "" txtFees.Text = "" txtAmountPaid.Text = "" txtBalance.Text = "" End Sub Private Sub cmdClose_Click() Unload Me End Sub Private Sub cmdDelete_Click() 'declare the variables Dim findvalue As Range Dim cDelete As VbMsgBoxResult 'check for values If txtStudentNum.Value = "" Or txtName.Value = "" Or txtDate.Text = "" Or ComBox1.Text = "" Or txtSlipNo.Text = "" Or txtFees.Text = "" Or txtAmountPaid.Text = "" Or txtBalance.Text = "" Then MsgBox "There is not data to delete" Exit Sub End If 'give the user a chance to change their mind cDelete = MsgBox("Are you sure that you want to delete this student", vbYesNo + vbDefaultButton2, "Are you sure????") If cDelete = vbYes Then 'delete the row Set findvalue = Sheet4.Range("D:D").Find(What:=txtStudentNum, LookIn:=xlValues) findvalue.EntireRow.Delete End If 'clear the controls txtDate.Text = "" ComBox1.Text = "" txtSlipNo.Text = "" txtStudentNum.Text = "" txtName.Text = "" 'txtFees.Text = "" txtAmountPaid.Text = "" txtBalance.Text = "" End Sub Private Sub cmdSearch_Click() Dim lastrow As Long Dim currentrow As Long Dim studentnum As String lastrow = Sheets("Sheet4").Range("A" & Rows.Count).End(xlUp).Row studentnum = txtStudentNum.Text For currentrow = 2 To lastrow If Cells(currentrow, 4).Text = studentnum Then txtDate.Text = Cells(currentrow, 1) ComBox1.Text = Cells(currentrow, 2) txtSlipNo.Text = Cells(currentrow, 3) txtStudentNum.Text = Cells(currentrow, 4).Text txtName.Text = Cells(currentrow, 5) txtFees.Text = Cells(currentrow, 6) txtAmountPaid.Text = Cells(currentrow, 7) txtBalance.Text = Cells(currentrow, 8) End If Next currentrow txtStudentNum.SetFocus End Sub Private Sub cmdSearchName_Click() Dim lastrow As Long Dim currentrow As Long Dim studentname As String lastrow = Sheets("Sheet4").Range("A" & Rows.Count).End(xlUp).Row studentname = txtName.Text For currentrow = 2 To lastrow If Cells(currentrow, 5).Text = studentname Then txtDate.Text = Cells(currentrow, 1) ComBox1.Text = Cells(currentrow, 2) txtSlipNo.Text = Cells(currentrow, 3) txtStudentNum.Text = Cells(currentrow, 4) txtName.Text = Cells(currentrow, 5).Text txtFees.Text = Cells(currentrow, 6) txtAmountPaid.Text = Cells(currentrow, 7) txtBalance.Text = Cells(currentrow, 8) End If Next currentrow txtName.SetFocus End Sub Private Sub cmdUpdate_Click() Dim tdate As String Dim tlevel As String Dim tslipno As String Dim tstudentnum As String Dim tname As String Dim tfees As String Dim tamountpaid As String Dim currentrow As Long Dim lastrow As Long 'If Cells(currentrow, 5).Text = studentname Then 'txtDate.Text = Cells(currentrow, 1) lastrow = Sheets("Sheet4").Range("A" & Columns.Count).End(xlUp).Offset(0, 1).Column For currentrow = 2 To lastrow tdate = txtDate.Text Cells(currentrow, 1).Value = tdate txtDate.Text = Cells(currentrow, 1) tlevel = ComBox1.Text Cells(currentrow, 2).Value = tlevel ComBox1.Text = Cells(currentrow, 2) tslipno = txtSlipNo.Text Cells(currentrow, 3).Value = tslipno txtSlipNo = Cells(currentrow, 3) tstudentnum = txtStudentNum.Text Cells(currentrow, 4).Value = tstudentnum txtStudentNum.Text = Cells(currentrow, 4) tname = txtName.Text Cells(currentrow, 5).Value = tname txtName.Text = Cells(currentrow, 5) tfees = txtFees.Text Cells(currentrow, 6).Value = tfees txtFees.Text = Cells(currentrow, 6) tamountpaid = txtAmountPaid.Text Cells(currentrow, 7).Value = tamountpaid txtAmountPaid.Text = Cells(currentrow, 7) Next currentrow txtDate.SetFocus ComBox1.SetFocus txtSlipNo.SetFocus txtStudentNum.SetFocus txtName.SetFocus txtFees.SetFocus txtAmountPaid.SetFocus txtBalance.SetFocus End Sub PLEASE I WAS THINKING IF I CAN DEVELOP SOMETHING THAT WILL USE ONLY ONE USERFORM TO SEND DATA TO DIFFERENT SHEETS IN THE WORKBOOK.

    Read the article

  • Making user input/math on data fast, unlike excel type programs

    - by proGrammar
    I'm creating a research platform solely for myself to do some research on data. Programs like excel are terribly slow for me so I'm trying to come up with another solution. Originally I used excel. A1 was the cell that contained the data and all other cells in use calculated something on A1, or on other cells, that all could be in the end traced to A1. A1 was like an element of an array, I then I incremented it to go through all my data. This was way too slow. So the only other option I found originally was to hand code in c# the calculations inside a loop. Then I simply recompiled each time I changed my math. This was terribly slow to do and I had to order everything correctly so things would update correctly (dependencies). I could have also used events, but hand coding events for each cell like calculation would also be very slow. Next I created an application to read Excel and to perfectly imitate it. Which is what I now use. Basically I write formulas onto a fraction of my data to get live results inside excel. Then my program reads excel, writes another c# program, compiles it, and runs that program which runs my excel created formulas through a lot more data a whole lot faster. The advantage being my application dependency sorts everything (or I could use events) so I don't have to (like excel does) And of course the speed. But now its not a single application anymore. Instead its 2 applications, one which only reads my formulas and writes another program. The other one being the result which only lives for a short while before I do other runs through my data with different formulas / settings. So I can't see multiple results at one time without introducing even more programs like a database or at least having the 2 applications talking to each other. My idea was to have a dll that would be written, compiled, loaded, and unloaded again and again. So a self-updating program, sort of. But apparently that's not possible without another appdomain which means data has to be marshaled to be moved between the appdomains. Which would slow things down, not for summaries, but for other stuff I need to do with all my data. I'm also forgetting to mention a huge problem with restarting an application again and again which is having to reload ALL my data into memory again and again. But its still a whole lot faster than excel. I'm really super puzzled as to what people do when they want to research data fast. I'm completely unable to have a program accept user input and having it fast. My understanding is that it would have to do things like excel which is to evaluate strings again and again. So my only option is to repeatedly compile applications. Do I have a correct understanding on computer science? I've only just began programming, and didn't think I would have to learn much to do some simple math on data. My understanding is its either compiling my user defined stuff to a program or evaluating them from a string or something stupid again and again. And my only option is to probably switch operating systems or something to be able to have a program compile and run itself without stopping (writing/compiling dll, loading dll to program, unloading, and repeating). Can someone give me some idea on how computers work? Is anything better possible? Like a running program, that can accept user input and compile it and then unload it later? I mean heck operating systems dont need to be RESTARTED with every change to user input. What is this the cave man days? Sorry, it's just so super frustrating not knowing what one can do, and can't do. If only I could understand and learn this stuff fast enough.

    Read the article

  • Windows Workflow Foundation 4 (WF4) Bookmark

    - by Russ Clark
    I'm working with Visual Studio 2010 and have a workflow where I'm trying to resume a bookmark. The bookmark appears to be getting set just fine, but when I try to run the code below to resume it, I get an entry in the InstancesTable in the persistence database with the SurrogateLockOwnerID field set to an integer, usually this field is null, and I can no longer do anything with the workflow. I think this is indicating that I have some kind of blocking lock going on, but I can't find any references anywhere to the SurrogateLockOwnerID. Does anyone know what is causing this, and how to fix it? WorkflowApplication workflowApp = new WorkflowApplication(new WebCARSWorkflow()); workflowApp.Extensions.Add(new SqlTrackingParticipant(ConnString)); InstanceStore instanceStore = new SqlWorkflowInstanceStore(ConnString); workflowApp.InstanceStore = instanceStore; workflowApp.Load(WorkflowInstanceId); workflowApp.PersistableIdle = (waie) => PersistableIdleAction.Unload; Approver actualApprover = new Approver(ProcessingStatus.Awaiting, my_RDA_Role, "RDAGetPlayersFromExternalRoleURI", 14); actualApprover.ActionDate = DateTime.Now; Player actualPlayer = (Player)GetPlayer(login); actualApprover.ActualPlayer = actualPlayer; actualApprover.ApproverAction = action; workflowApp.ResumeBookmark("ErrorOccurredBookmark", actualApprover);

    Read the article

  • AutoMapper a viable alternative to two way databinding using a FormView?

    - by tbone
    I've started using the FormView control to enable two way databinding in asp.net webforms. I liked that it saved me the trouble of writing loadForm and unloadForm routines on every page. So it seemed to work nicely at the start when I was just using textboxes everywhere....but when it came time to start converting some to DropDownLists, all hell broke lose. For example, see: http://stackoverflow.com/questions/2435185/not-possible-to-load-dropdownlist-on-formview-from-code-behind ....and I had many additional problems after that. So I happened upon an article on AutoMapper, which I know very little about yet, but from the sounds of it, this might be a viable alternative to two-way databinding a form to an domain entity object? From what I understand, AutoMapper basically operates on naming convention, so, it will look for matched names properties(?) on the source and destination objects. So, basically, I have all my domain entities (ie: Person) with properties (FirstName, LastName, Address, etc)....what I would like to be able to do is declare my asp controls with those exact same names, and have automapper do the loading and unloading. One obvious caveat is that AutoMapper would have to know the proper property name for each control type, ie: Person.FirstName -- form.FirstName*.Text* Person.Country -- form.Country.SelectedValue Person.IsVerified -- form.IsVerified.Checked ....so it would have to have the smarts to find the control on the form, determine its type, and then load/unload between the domain object and the webform control into the proper property of the control. So if this worked, a person could just get rid of the cursed FormView control entirely, and it would be just one line of code each for binding and unbinding a webform. Possible?

    Read the article

  • .NET remoting exception: Permission denied: cannot call non-public or static methods remotely.

    - by Vilx-
    I'm writing a program which will allow to load a specific managed .DLL file and play with it. Since I want the ability to unload the .DLL file, I'm creating two AppDomains - one for the app itself, the other for the currently loaded .DLL. Since most of the objects in the loaded .DLL do not serialize well, I'm creating a MarshalByRefObject wrapper class which will keep the object itself in its own AppDomain, and expose some reflection functions to the main application AppDomain. However when I try to invoke a method on the remote object I get stuck with an exception: Permission denied: cannot call non-public or static methods remotely. This is very strange, because I'm not using any non-public or static methods at all. In essence, what I have is: class RemoteObjectWrapper: MarshalByRefObject { private Type SourceType; private object Source; public RemoteObjectWrapper(object source) { if (source == null) throw new ArgumentNullException("source"); this.Source = source; this.SourceType = source.GetType(); } public T WrapValue<T>(object value) { if ( value == null ) return default(T); var TType = typeof(T); if (TType == typeof(RemoteObjectWrapper)) value = new RemoteObjectWrapper(value); return (T)value; } public T InvokeMethod<T>(string methodName, params object[] args) { return WrapValue<T>(SourceType.InvokeMember(methodName, System.Reflection.BindingFlags.FlattenHierarchy | System.Reflection.BindingFlags.Instance | System.Reflection.BindingFlags.InvokeMethod | System.Reflection.BindingFlags.Public, null, this.Source, args)); } } And I get the exception when I try to do: var c = SomeInstanceOfRemoteObjectWrapper.InvokeMethod<RemoteObjectWrapper>("somePublicMethod", "some string parameter"); What's going on here? As far as I can understand, the InvokeMethod method doesn't even get executed, the exception is thrown when I try to run it. Added: To clarify - SomeInstanceOfRemoteObjectWrapper is constructed in the .DLL's AppDomain and then returned to my main AppDomain, The InvokeMethod<T>() is called from my main AppDomain (and I expect it to execute in the .DLL's AppDomain).

    Read the article

  • Why does the the Java VM not recover after "Too many open files" errors?

    - by Michael
    In certain well-understood circumstances, our application will open too many sockets (database connections) and reach the maximum open files that the OS allows. We understand this; we are fixing the issue and also bumping up the limit. What we can't explain is why parts of our application don't recover even after the number of connections abates and we're well within the limit. In this case, it's an application running under Tomcat. When this happens, we first start seeing "Too many open files" errors: SEVERE: Socket accept failed java.net.SocketException: Too many open files at java.net.PlainSocketImpl.socketAccept(Native Method) at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:390) at java.net.ServerSocket.implAccept(ServerSocket.java:453) at java.net.ServerSocket.accept(ServerSocket.java:421) at org.apache.tomcat.util.net.DefaultServerSocketFactory.acceptSocket(DefaultServerSocketFactory.java:61) at org.apache.tomcat.util.net.JIoEndpoint$Acceptor.run(JIoEndpoint.java:310) at java.lang.Thread.run(Thread.java:619) Eventually, we start seeing NoClassDefFoundErrors inside an application thread that's trying to open HTTP connections: java.lang.NoClassDefFoundError: org/apache/commons/httpclient/protocol/ControllerThreadSocketFactory at org.apache.commons.httpclient.protocol.DefaultProtocolSocketFactory.createSocket(DefaultProtocolSocketFactory.java:128) at org.apache.commons.httpclient.HttpConnection.open(HttpConnection.java:707) at org.apache.commons.httpclient.MultiThreadedHttpConnectionManager$HttpConnectionAdapter.open(MultiThreadedHttpConnectionManager.java:1349) [...] Caused by: java.lang.ClassNotFoundException: org.apache.commons.httpclient.protocol.ControllerThreadSocketFactory at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1387) at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1233) at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320) ... 8 more When the errant connections go away, the server starts accepting connections again, and everything seems ok, but we're left with the latter error constantly being spewed to stderr. Although the application typically logs unloaded classes to stdout, I don't see any such logs just before, during or after the "Too many open files" errors. My initial theory was that the Hotspot JVM would unload seemingly unused classes when it encounters "Too many open files," but if so, it doesn't log the fact. I'd also expect it to recover if that were the case. Platform details: Java(TM) SE Runtime Environment (build 1.6.0_14-b08) Java HotSpot(TM) 64-Bit Server VM (build 14.0-b16, mixed mode) Apache Tomcat Version 6.0.18

    Read the article

  • AS3 - Unloaded AVM1 swfs trace out as unloaded but memory is not freed for the AVM2 machine

    - by puppbits
    I have a large project built in as3. Part of its main functionality is to load and unload various as2 swfs. The problem is that the memory ins't free up once they are unloaded. I have access to the as2 swfs code base and destroyed all objects, stopped and killed timers, listeners, removed from stage, destroyed all the MovieClip.protoypes that were created. They look to be clean as far as the AS2 debugger show no remnants of the object after the destroy function is run. In AS3 i've closed the local connection, cleaned all references/listeners to the AVM1Movie and ran Loader.unloadAndStop(). The trace out in flex says the swf was unloaded but looking at windows task manager the memory usage never drops to when it was before the as2 swf was loaded. Each as2 swf can take up to 80 megs each time it's run so memory gets eaten up fast and loading and unloading a few as2 files. At this point if the AS2 swfs are unloaded the only thing that I can assume that could be left is MovieClip.prototype and/or _global, _root variables add during the AS2's run time. But i've gone through those and can't find anything else that might be sticking. Has anyone ever seen problems before with the AVM1 machine not freeing up its memory?

    Read the article

  • Javascript "Member not found" error in IE8

    - by Steven
    I'm trying to debug the following block of Javascript code to see what the issue is. I'm getting an error that says "Member not found" on the line constructor = function() { in the extend:function() method. I'm not very good with Javascript, and I didn't write this, so I'm kind of lost on what the issue is. The error only occurs in IE8, it works fine in IE7 and Firefox. var Class = { create: function() { return function() { if(this.destroy) Class.registerForDestruction(this); if(this.initialize) this.initialize.apply(this, arguments); } }, extend: function(baseClassName) { constructor = function() { var i; this[baseClassName] = {} for(i in window[baseClassName].prototype) { if(!this[i]) this[i] = window[baseClassName].prototype[i]; if(typeof window[baseClassName].prototype[i] == 'function') { this[baseClassName][i] = window[baseClassName].prototype[i].bind(this); } } if(window[baseClassName].getInheritedStuff) { window[baseClassName].getInheritedStuff.apply(this); } if(this.destroy) Class.registerForDestruction(this); if(this.initialize) this.initialize.apply(this, arguments); } constructor.getInheritedStuff = function() { this[baseClassName] = {} for(i in window[baseClassName].prototype) { if(!this[i]) this[i] = window[baseClassName].prototype[i]; if(typeof window[baseClassName].prototype[i] == 'function') { this[baseClassName][i] = window[baseClassName].prototype[i].bind(this); } } if(window[baseClassName].getInheritedStuff) { window[baseClassName].getInheritedStuff.apply(this); } } return constructor; }, objectsToDestroy : [], registerForDestruction: function(obj) { if(!Class.addedDestructionLoader) { Event.observe(window, 'unload', Class.destroyAllObjects); Class.addedDestructionLoader = true; } Class.objectsToDestroy.push(obj); }, destroyAllObjects: function() { var i,item; for(i=0;item=Class.objectsToDestroy[i];i++) { if(item.destroy) item.destroy(); } Class.objectsToDestroy = null; } }

    Read the article

  • ASP.NET dynamically reassign controls in the control tree

    - by pbz
    Let's say I have a custom control that looks like this <cc:MyControl runat="server" ID="myc" LinkControlID="NewParent" /> and, on the same page: <asp:TextBox runat="server" ID="NewParent" /> What I would like to do is, from MyControl, change NewParent's parent so that it would be part of MyControl's Controls collection. When I try to do this, from OnInit, I get: The control collection cannot be modified during DataBind, Init, Load, PreRender or Unload phases. Which makes sense, but is there a way around this? I'm OK if NewParent remains the child of the Page as long as from MyControl I can somehow redirect the rendering to MyControl's control. Can this be done? Thanks. EDIT: To clarify here's a mockup of MyControl: public class MyControl : Panel { protected override void OnInit(System.EventArgs e) { base.OnInit(e); if (!String.IsNullOrEmpty(LinkControlID)) { Control link = Parent.FindControl(LinkControlID); if (link != null) { Controls.Add(link); } } } public string LinkControlID { get; set; } } This assumes that MyControl and LinkControlID are placed on the same level in the tree hierarchy, which is OK in my case.

    Read the article

  • How to implement properly plugins in C#?

    - by MartyIX
    I'm trying to add plugins to my game and what I'm trying to implement is this: Plugins will be either mine or 3rd party's so I would like a solution where crashing of the plugin would not mean crashing of the main application. Methods of plugins are called very often (for example because of drawing of game objects). What I've found so far: 1) http://www.codeproject.com/KB/cs/pluginsincsharp.aspx - simple concept that seems like it should work nicely. Since plugins are used in my game for every round I would suffice to add the Restart() method and if a plugin is no longer needed Unload() method + GC should take care of that. 2) http://mef.codeplex.com/Wikipage - Managed Extensibility Framework - my program should work on .NET 3.5 and I don't want to add any other framework separately I want to write my plugin system myself. Therefore this solution is out of question. 3) Microsoft provides: http://msdn.microsoft.com/en-us/library/system.addin.aspx but according to a few articles I've read it is very complex. 4) Different AppDomains for plugins. According to Marc Gravell ( http://stackoverflow.com/questions/665668/usage-of-appdomain-in-c ) different AppDomains allow isolation. Unloading of plugins would be easy. What would the performance load be? I need to call methods of plugins very often (to draw objects for example). Using Application Domains - http://msdn.microsoft.com/en-us/library/yb506139.aspx A few tutorials on java2s.com Could you please comment on my findings? New approaches are also welcomed! Thanks!

    Read the article

  • function (blurClass) NOT WORKING IN IE

    - by Erik
    I can't get this plugin to function properly in IE.... Check out my homepage and look at the huge search field toward the top... www.naturalskin.com Whenever I refresh the screen the "blur" looses its function and I'm stuck with text..... Here is the script that I place in an external js page: http://www.naturalskin.com/src/js/javascript/batches.js jQuery.fn.hint = function (blurClass) { if (!blurClass) { blurClass = 'blur'; } return this.each(function () { // get jQuery version of 'this' var $input = jQuery(this), // capture the rest of the variable to allow for reuse title = $input.attr('title'), $form = jQuery(this.form), $win = jQuery(window); function remove() { if ($input.val() === title && $input.hasClass(blurClass)) { $input.val('').removeClass(blurClass); } } // only apply logic if the element has the attribute if (title) { // on blur, set value to title attr if text is blank $input.blur(function () { if (this.value === '') { $input.val(title).addClass(blurClass); } }).focus(remove).blur(); // now change all inputs to title // clear the pre-defined text when form is submitted $form.submit(remove); $win.unload(remove); // handles Firefox's autocomplete } }); }; Erik

    Read the article

  • jQuery and MooTools Conflict

    - by flipflopmedia
    Okay, so I got jQuery to get along with MooTools with one script, by adding this at the top of the jQuery script: var $j = jQuery.noConflict(); and then replacing every: $( with $j( But how would you get MooTools to like the following script that using jQuery?? Thanks in advance for any input, Tracy //Fade In Content Viewer: By JavaScript Kit: http://www.javascriptkit.com var fadecontentviewer={ csszindex: 100, fade:function($allcontents, togglerid, selected, speed){ var selected=parseInt(selected) var $togglerdiv=$("#"+togglerid) var $target=$allcontents.eq(selected) if ($target.length==0){ //if no content exists at this index position (ie: stemming from redundant pagination link) alert("No content exists at page number "+selected+"!") return } if ($togglerdiv.attr('lastselected')==null || parseInt($togglerdiv.attr('lastselected'))!=selected){ var $toc=$("#"+togglerid+" .toc") var $selectedlink=$toc.eq(selected) $("#"+togglerid+" .next").attr('nextpage', (selected<$allcontents.length-1)? selected+1+'pg' : 0+'pg') $("#"+togglerid+" .prev").attr('previouspage', (selected==0)? $allcontents.length-1+'pg' : selected-1+'pg') $target.css({zIndex: this.csszindex++, visibility: 'visible'}) $target.hide() $target.fadeIn(speed) $toc.removeClass('selected') $selectedlink.addClass('selected') $togglerdiv.attr('lastselected', selected+'pg') } }, setuptoggler:function($allcontents, togglerid, speed){ var $toc=$("#"+togglerid+" .toc") $toc.each(function(index){ $(this).attr('pagenumber', index+'pg') }) var $next=$("#"+togglerid+" .next") var $prev=$("#"+togglerid+" .prev") $next.click(function(){ fadecontentviewer.fade($allcontents, togglerid, $(this).attr('nextpage'), speed) return false }) $prev.click(function(){ fadecontentviewer.fade($allcontents, togglerid, $(this).attr('previouspage'), speed) return false }) $toc.click(function(){ fadecontentviewer.fade($allcontents, togglerid, $(this).attr('pagenumber'), speed) return false }) }, init:function(fadeid, contentclass, togglerid, selected, speed){ $(document).ready(function(){ var faderheight=$("#"+fadeid).height() var $fadecontents=$("#"+fadeid+" ."+contentclass) $fadecontents.css({top: 0, left: 0, height: faderheight, visibility: 'hidden'}) fadecontentviewer.setuptoggler($fadecontents, togglerid, speed) setTimeout(function(){fadecontentviewer.fade($fadecontents, togglerid, selected, speed)}, 100) $(window).bind('unload', function(){ //clean up $("#"+togglerid+" .toc").unbind('click') $("#"+togglerid+" .next", "#"+togglerid+" .prev").unbind('click') }) }) } }

    Read the article

  • Modify Executing Jar file

    - by pinkynobrain
    Hello Stack Overflow friends. I have a simple problem which i fear doesnt have a simple solution and i need advice as to how to proceed. I am developing a java application packaged as and executable JAR but it requires to modify some of its JAR file contents during execution. At this stage i hit a problem because some OS lock the file preventing writes to it. It is essential that the user sees an updated version of the jar file by the time the application exits allthough i can be pretty flexible as to how to achieve this. A clean and efficient solution is obviously prefereable but portability is the only hard requirement. The following are three approaches i can see to solving the problem, feel free to comment on them or suggest others. Tell Java to unlock the JAR file for writing(this doesnt seem possible but it would be the easyest solution) Copy the executable class files to a tempory file on application startup, use a class loader to load these files and unload the ones from the initial JAR file.(Not had much experience with the classloaders but hopefully the JVM would then be smart enough to realize that the original JAR is nolonger in use and so unlock it) Put a Second executable JAR File inside the First, on startup extract the inner jar to e temporaryfile, invoke a new java process and pass it the location of the Outer JAR, first process exits, second process modifys the Outer jar unincumbered.(This will work but im not sure there is a platform independant way of one java app invoking another) I know this is a weird question but any help would be appreciated.

    Read the article

< Previous Page | 6 7 8 9 10 11 12 13  | Next Page >