Search Results

Search found 3844 results on 154 pages for 'detect'.

Page 100/154 | < Previous Page | 96 97 98 99 100 101 102 103 104 105 106 107  | Next Page >

• Dual Monitor 'How To' for 12.04

  - by Kim Prince

  I recently built my own PC and was delighted with the result, except for a problem with dual monitors. After having tried a few different combinations of hardware, I think what I really need is a 'how to' explanation. My motherboard is an MSI Z77MA-G45, which has an analogue, a DVI, and a HDMI port. Initially I hooked monitors up to the DVI and analogue port and it seemed to work fine. Both screens worked independently of each other, it was great. After a few days I started turning my PC off at night, and when I tried to turn it back on it would boot into the terminal mode. I would have to turn one of the monitors off and after rebooting a few times, it would eventually boot into an X Window session. Occasionally I would see an error relating to Xorg. I upgraded the motherboard BIOS but that made no difference. Eventually, I installed a graphics card - an NVIDIA GeForce GT 520. Now it seems that my on board graphics have been disabled completely, and I am reliant on the graphics card. Furthermore, the graphics card seems to only recognise one screen at a time. (The first time I rebooted with both plugged in, it flashed up a message saying that it was auto-selecting DVI). Anyhow, I think I need some 'how to' (or perhaps 'where to'), from here. For example, is X Windows configuration the next place to look? And how do I go about configuring X Windows? (Note that in Systems Settings it says my graphics driver is 'unknown', and when I ask it to detect monitors, it sees only the one!)

  Read the article

• Problem with APTonCD application

  - by Harikrishnan

  I created a iso image using aptoncd & burned it to a dvd. now when i tried to restore, the program does not detect the dvd in the drive. It shows "Please insert a disc in the drive." and if we click "ok" it shows "E: Failed to mount the cdrom.". The dvd is in the drive itself. I tried "sudo lshw -C disk" and the out put is: *-cdrom description: DVD-RAM writer product: DVDRAM GH22NS50 vendor: HL-DT-ST physical id: 1 bus info: scsi@1:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/scd0 logical name: /dev/sr0 logical name: /media/APTonCD logical name: /media/apt version: TN02 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 mount.fstype=iso9660 mount.options=ro,relatime,uid=1000,gid=1000,iocharset=utf8,mode=0400,dmode=0500 state=mounted status=ready *-medium physical id: 0 logical name: /dev/cdrom logical name: /media/APTonCD logical name: /media/apt configuration: mount.fstype=iso9660 mount.options=ro,relatime,uid=1000,gid=1000,iocharset=utf8,mode=0400,dmode=0500 state=mounted Then i checked in disk utility application. in that dvd rom is shown as "/dvd/sr0". my ubuntu version is 10.10. please help me to solve the problem.

  Read the article

• Dual Boot menu with Ubuntu and Windows 8 not showing up

  - by user180630

  I know a lot of posts have been written, and I had read most of them when I encountered the problem. None of them solved the problem. I have successfully installed Ubuntu 12.04 on top of Windows 8. Now my PC simply boots into Windows 8. If I press 'Esc' at start of BIOS, and then F9,the GRUB shows up and Ubuntu is listed at the top of the several options to boot from. I did run Boot-Repair once I logged into Ubuntu explicitly from GRUB as mentioned above. I did all said by Stormvirux in this link but was still unsuccessful. The debug info is listed here. Something which confuses me is the message which Boot-Repair stated after it did its job. You can now reboot your computer. Please do not forget to make your BIOS boot on sda (8004MB) disk! The boot files of [The OS now in use - Ubuntu 12.04.2 LTS] are far from the start of the disk. Your BIOS may not detect them. You may want to retry after creating a /boot partition (EXT4, 200MB, start of the disk). This can be performed via tools such as gParted. Then select this partition via the [Separate /boot partition:] option of [Boot Repair]. (https://help.ubuntu.com/community/BootPartition) I don't know why it says it is far from the start of the disk as I see it first in the GRUB menu which comes up at startup. One more input, when I try to place the GRUB in sda, Boot-Repair does not progress giving me the following error: GPT detected. Please create a BIOS-Boot partition (>1MB, unformatted filesystem, bios_grub flag). This can be performed via tools such as Gparted. Then try again. Alternatively, you can retry after activating the [Separate /boot/efi partition:] option. I had to select Separate /boot/efi partition: sdb2

  Read the article

• Combining pathfinding with global AI objectives

  - by V_Programmer

  I'm making a turn-based strategy game using Java and LibGDX. Now I want to code the AI. I haven't written the AI code yet. I've simply designed it. The AI will have two components, one focused in tactics and resource management (create troops, determine who have strategical advantage, detect important objectives, etc) and a individual component, focused in assign the work to each unit, examine its possibilites and move the unit. Now I'm facing an important problem. The map where the action take place is a grid-based map. Each terrain has different movement cost. I read about pathfinding and I think A* is a very good option to determine a good route between two points. However, imagine I have an unit with movement = 5 (i.e, it can move 5 tiles of movement cost = 1). My tactical AI has found an objective at a distance d = 20 tiles (Manhattan distance) from my unit. My problem is the following: the unit won't be able to reach the objective in one turn. So the AI will have to store a list of position and execute them in various turns. I don't know how to solve this. PS. In my unit code, I have a list called "selectionMarks" which stores all the possible places where the unit can go in this turn. This places are calculed recursively using a "getSelectionMarks" function. Any help is appreciated :D

  Read the article

• Why Swipe left doesn't work? [on hold]

  - by Hitesh

  I wrote the below code to detect and perform a sprite action on the single tap and swipe right event. @Override public boolean onSceneTouchEvent(Scene pScene, TouchEvent pSceneTouchEvent) { float x = 0F; int tapCount = 0; boolean playermoving = false; // TODO Auto-generated method stub if (pSceneTouchEvent.getAction() == MotionEvent.ACTION_MOVE) { if (pSceneTouchEvent.getX() > x) { playermoving = true; players.runRight(); } if (pSceneTouchEvent.getX() < x) { Log.i("Run Left", "SPRITE Left"); } /* * if (pSceneTouchEvent.getX() < x) { System.exit(0); * Log.i("SWIPE left", "SPRITE LEFT"); } */ } if (pSceneTouchEvent.getAction() == MotionEvent.ACTION_DOWN) { playermoving = false; x = pSceneTouchEvent.getX(); tapCount++; Log.i("X CORD", String.valueOf(x)); } if (pSceneTouchEvent.isActionDown()) { if (tapCount == 1 && playermoving != true) { tapCount = 0; players.jumpRight(); } } return true; } The code works fine. The only problem is that the swipe left event is not being detected due to some reasons. What can i do to make the swipe left action work? Please help

  Read the article

• My computer may have been compromised, what should I do?

  - by InkBlend

  A few weeks ago, my machine (lets call it "main") was logged into wirelessly from an unauthorized host, probably using ssh. I did not detect the intrusion until a few days ago, and my machine is completely shut down. I found the login using this line from last: myusername pts/1 ipad Tue Oct 15 22:23 - 22:25 (00:02) Needless to say, not only does no one in my family own an iPad, but almost none of my friends do, either. This makes me suspect that whoever was behind this changed the hostname of their machine. Additionally, I discovered this line in the last output on another machine of mine ("secondary"): myusername pts/2 :0 Tue Oct 15 22:23 - 22:23 (00:00) This line coincides with the timestamp from main, which has password-less ssh access (through keys) to secondary. Is it possible that whoever broke in to main has also rooted secondary? How can I prevent this from happening again? Are there logs that I can look through to determine exactly how main was accessed (I am the only user on the system and have a very strong password)? Is it at all possible that this is just a weird bug that occurred? Should I, and where should I start looking for rootkits and/or keyloggers? In short, what should I do?

  Read the article

• Box2D `ApplyLinearImpulse` is not working whereas `SetLinearVelocity` works

  - by Narek

  I need to mimic jumping behavior for the player in my game. Player consists of two fixtures with circle and rectangle shapes. Rectangle I use to detect ground and it is a sensor. Is some point for jumping I do this: float impulseY = body->GetMass() * PLAYER_JUMPING_VEOCITY / PTM_RATIO * std::sin(PLAYER_JUMPING_ANGLE * PI / 180); body->ApplyLinearImpulse(b2Vec2(0, impulseY), body->GetWorldCenter(), true); and player does not jump. But when I do this: body->SetLinearVelocity(b2Vec2(0, PLAYER_JUMPING_VEOCITY / PTM_RATIO * std::sin(PLAYER_JUMPING_ANGLE * PI / 180))); my player jumps. Also when I change the rectangle shape to be normal (not sensor) shape, its works again. Why? Just in case here are the parameters of my rectangular sensor: b2PolygonShape boxShape; boxShape.SetAsBox(width * 0.5/2/PTM_RATIO, height * 0.2/2/PTM_RATIO, b2Vec2(0, -height * 0.4 /PTM_RATIO), 0); b2FixtureDef boxFixtureDef; boxFixtureDef.friction = 0; boxFixtureDef.restitution = 0; boxFixtureDef.density = 1; boxFixtureDef.isSensor = true; boxFixtureDef.userData = static_cast<void*>(PLAYER_GROUP);

  Read the article

• Stylecop 4.7.36.0 is out!

  - by TATWORTH

  Stylecop 4.7.36.0 has been released at http://stylecop.codeplex.com/releases/view/79972This is an update to coincide with the latest ReSharper. The full fix list is:4.7.36.0 (508dbac00ffc)=======================Fix for 7344. Don't throw 1126 inside default expressions.Fix for 7371. Compare Namespace parts using the CurrentCulture and not InvariantCulture.Fix for 7386. Don't throw casing violations for filed names in languages that do not support case (like Chinese). Added new tests.fix for 7380. Catch Exception caused by CRM Toolkit.Update ReSharper 7.0 dependency to 7.0.1 (7.0.1098.2760)Fix for 7358. Use the RuleId in the call to MSBuild Logging.Fix for 7348. Update suggestion text for constructors.Fix for 7364. Don't throw 1126 for New Array Expressions.Fix for 7372. Throw 1126 inside catch blocks wasn't working. Add new tests.Fix for 7369. Await is allowed to be inside parenthesis. Add new tests.Fix testsCorrect styling issues.Fix for 7373. Typeparam violations were not being thrown in all cases. Added new tests.Fix for 7361. Rule 1120 was logging against the root element and so Suppressions wouldn't work. Fixed and added tests.Updating de-DE resources - from Michael Diermeier - thank you.Change for 7368. Add the violation count into the Task outputs.Fix for 7383. Fix for memory leak in plugins.Update environment to detect ReSharper 7Fix for 7378. Null reference exception from command line run in message output.Update release history.

  Read the article

• USB flash module giving errors

  - by vshenoy

  Hi, I have a SATA USB flash module which was earlier running a 2.4 linux kernel (2.4.36.6) and on which now I am trying to install ubuntu server 10.04.1 LTS. I have two such USB flash modules and on one of them the installation process itself giving these errors: sd 4:0:0:0 [sda] Device not ready sd 4:0:0:0 [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 4:0:0:0 [sda] Sense Key : Not Ready [current] sd 4:0:0:0 [sda] Add. Sense: Medium not present sd 4:0:0:0 [sda] CDB: Write(10): 2a 00 00 05 48 02 00 00 04 00 end_request: I/O error, dev sda, sector 46114 usb 1-1: reset high speed USB device using ehci_hcd and address 2 Buffer I/O error on device sda1, logical block 172033 lost page write due to I/O error on sda1 Buffer I/O error on device sda1, logical block 172034 lost page write due to I/O error on sda1 on the other the installation is successful, but after a day or two of running the machine hangs because of kernel spewing these messages: Remounting filesystem read-only EXT2-fs error (device sda1): read_block_bitmap: Cannot read block [bitmap - block_group = 105, block_bitmap = 860161] EXT2-fs error (device sda1): ext2_get_inode: unable to read inode block - inode=13083, block=24683 ext2_free_inode: bit already cleared for inode 83966 and the machine needs to be hard rebooted. On both the systems SCSI emulation with usb_storage driver is being used to detect the module. Here is the output of /proc/scsi/scsi on 2.4: # cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: TS Model: UFM Rev: 1100 Type: Direct-Access ANSI SCSI revision: 02 and on 2.6: # cat /proc/scsi/scsi Attached devices: Host: scsi6 Channel: 00 Id: 00 Lun: 00 Vendor: TS Model: UFM Rev: 1100 Type: Direct-Access ANSI SCSI revision: 00 i.e. only 'ANSI SCSI revision:' is shown as different, although I am not sure if this can cause any problem. Really appreciate if someone can point as to how to debug this issue or any mailing list where I can further ask questions about this.

  Read the article

• Java - Using Linear Coordinates to Check Against AI [closed]

  - by Oliver Jones

  I'm working on some artificial intelligence, and I want my AI not to run into given coordinates as these are references of a wall/boundary. To begin with, every time my AI hits a wall, it makes a reference to that position (x,y). When it hits the same wall three times, it uses linear check points to 'imagine' there is a wall going through these coordinates. I want to now prevent my AI from going into that wall again. To detect if my coordinates make a straight line, i use: private boolean collinear(double x1, double y1, double x2, double y2, double x3, double y3) { return (y1 - y2) * (x1 - x3) == (y1 - y3) * (x1 - x2); } This returns true is the given points are linear to one another. So my problems are: How do I determine whether my robot is approaching the wall from its current trajectory? Instead of Java 'imagining' theres a line from 1, to 3. But to 'imagine' a line all the way through these linear coordinantes, until infinity (or close). I have a feeling this is going to require some confusing trigonometry? (REPOST: http://stackoverflow.com/questions/13542592/java-using-linear-coordinates-to-check-against-ai)

  Read the article

• Macbook overheats in 12.04 beta

  - by zookalicious

  Since I've heard a lot of great things about the upcoming 12.04 release, I decided to give the beta 2 a shot. Everything works very well, except ubuntu wasn't controlling the fan speed for a while. In all the past versions of ubuntu, I've just used the mactel support repository to detect my fans with the macfanctld package, and that has worked well. However it doesn't seem like that package has been updated yet for Precise, so I used the method at this Ubuntu forums thread instead. Now my computers fans are recognized and will spin up, but my laptop is getting VERY hot very frequently. Even just opening up a web browser and Libreoffice writer is enough to make the bottom of my computer feel like it's on fire and cause the fans to spin up to full. "top" shows that there are no programs eating up my CPU usage, which sometimes causes overheating. If anyone has any suggestions I would love to hear them. 12.04 is very nice and I know that for 11.10 macfanctld didn't get updated for a long time, so I'm hesitant to just wait for that.

  Read the article

• Second Monitor Detected, but not receiving a signal after upgrading to 12.04

  - by user62458

  After I upgraded to 12.04, my second monitor is detected (in display settings), but will not power on. I have scoured the Internet and forums for a solution and I can't find anything. I have found a couple people with the same problem, but never a solution for it. I am no expert, but I'm certainly not a noob. My computer uses AMD Radeon 6250 graphics, but I do NOT want to use the proprietary graphics drivers. They refuse to work properly with my second monitor (they ATI drivers will only mirror screens, and I've done everything to try to fix it, and I DON't want mirrored screens) Not to mention that the default open-source video drivers seem to work much better than the proprietary anyway! Again, Ubuntu's default video drivers work fine, and they even DETECT the second monitor (Dell 19'). I can drag stuff off the screen and put it on the 'space' of the second monitor and even a screen-shot shows that there are two monitors active; but the monitor is OFF. It will not power on. It goes into 'power-save' mode because it is not receiving a signal. For some reason it is not getting the signal to power on, even though Ubuntu thinks the monitor is working properly. I had this working fine on my Sony VAIO yesterday (with Radeon graphics/default Ubuntu video drivers). I upgraded to a Samsung Series 3 and now I have this issue. I can't for the life of me figure out why the monitor is connected, detected and I have screen space for the monitor, but the screen won't turn on! XRANDR Output: Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192 VGA-0 connected (normal left inverted right x axis y axis) 1440x900 59.9 + 75.0 1280x1024 75.0 60.0 1152x864 75.0 1024x768 75.1 70.1 60.0 832x624 74.6 800x600 72.2 75.0 60.3 56.2 640x480 72.8 75.0 66.7 60.0 720x400 70.1 LVDS connected 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 194mm 1366x768 60.1*+ 1280x720 59.9 1152x768 59.8 1024x768 59.9 800x600 59.9 848x480 59.7 720x480 59.7 640x480 59.4 HDMI-0 disconnected (normal left inverted right x axis y axis)

  Read the article

• Multitouch screen not detected on Asus Taichi 21DH71

  - by geekfreak

  I just bought this Ultrabook "Asus Taichi 21 DH71". This has Intel 3rd generation i7 processor and 4gb ram with 256 gb SSD. The main feature is that it is a hybrid machine. Naming it has dual screens. When the lid is closed it can be used as a tablet and when lid open it can be used as a notebook. This machine can also be used with the two screens on at the same time. I used ubuntu many years ago and loved it. But I never tried any linux later. My questions are Does the new version of Ubuntu support the Multitouch interface? Will it work specifically on this machine? Will Ubuntu support gestures on multi touchpad? Update 2/22/2013 I did try the latest 64bit Ubuntu(12.10) from live usb and noticed that it couldn't detect the tablet screen. Everything else worked seamlessly. Do you guys think the tablet screen would be detected if I make a complete installation on to the notebook? Please help guys..

  Read the article

• How to move ubuntu 12.04 on another drive

  - by Maksim

  How I can move my ubuntu on another drive? I know about clonezilla but problem is that destination drive is smaller the source one. Gparted can't copy-paste partition if destination not the end last partition. I tried dpkg --selected-packages and apt-clone. First one just not install all my packages and removed existed that now I have no full unity and not my all packages. Second one just fail on configuration package. But before I did that way I copy-paste my /etc to new system. My partition table destination : gpt 1 1049kB 106MB 105MB fat32 EFI System ??????????? 2 106MB 12,1GB 12,0GB ext4 3 12,1GB 66,3GB 54,2GB ext4 source: msdos 1 1049kB 12,0GB 12,0GB primary ext4 ??????????? 2 12,0GB 492GB 480GB primary ext4 3 492GB 500GB 8107MB primary linux-swap(v1) Gpt not working with ubuntu that use grub 1.99. I don't know why but my laptop can't boot any device with uefi just black screen and ubuntu detect it on fresh install.

  Read the article

• What to do when 'dpkg --configure -a' fails with too many errors?

  - by rudivonstaden

  During an upgrade from lucid (10.04) to precise (12.04), the X session froze, and I have been trying to recover the upgrade to get a stable system. I have performed the following steps: Used ssh to log in to the stalled system over the network. Checked the contents of the /var/log/dist-upgrade directory. There was no activity on main.log, apt.log or term.log. top showed that process 'precise' was using about 3% CPU, but I could find no evidence that the upgrade process was still doing anything. 'dpkg' did not show up in top, but it came up with pgrep dpkg | xargs ps Killed the 'dpkg' and 'precise' processes Tried to recover the upgrade by running sudo fuser -vki /var/lib/dpkg/lock;sudo dpkg --configure -a. This was partially successful (some packages were configured), but failed with the message Processing was halted because there were too many errors. I ran the same command a few times, and each time some packages were configured but others failed. Tried running sudo apt-get -f install. It fails with similar errors to dpkg. The current situation is that dpkg --configure -a and sudo apt-get -f install fails with two kinds of error: Dependency issues, e.g.: dpkg: dependency problems prevent configuration of cifs-utils: cifs-utils depends on samba-common; however: Package samba-common is not configured yet. dpkg: error processing cifs-utils (--configure): dependency problems - leaving unconfigured Resource conflict, e.g.: debconf: DbDriver "config": /var/cache/debconf/config.dat is locked by another process: Resource temporarily unavailable Additionally, it seems there's reference to potential boot problems, so I'm not keen to reboot without fixing the install first: dpkg: too many errors, stopping Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-3.2.0-25-generic cryptsetup: WARNING: failed to detect canonical device of /dev/sda1 cryptsetup: WARNING: could not determine root device from /etc/fstab So my question is, how to get a working install when dpkg --configure -a fails?

  Read the article

• Is it possible to generate Events and Hooks in Lua for any game without built-in support?

  - by pr0tocol

  Does a game have to have built-in functions to accept and run lua scripts, or can I design Events and Hooks using Lua on any game I please, akin to the days where C code could be used to hook into the WinAPI using dlls? The reason I ask is, I am trying to create a background application that will perform events and hooks on a particular game that does not currently support lua in-game. Brief examples: Events: - An action executed by the PLAYER is detected. For instance, hitting the Q key will normally make my character use an ability, but with my Lua script running in the background, will cause a sound to play on my computer (or something). Hooks: - An action within the GAME is detected. For instance, the game spawns an enemy every minute. When an enemy spawns, the script will detect this and perform an action, for instance playing a sound locally on the computer. I would like to do both, but I know for games like Garry's Mod, the game already has built-in support for running lua scripts. Is there a way to do either events OR hooks using lua similarly to how C/C++ can connect to a game using WinAPI dlls?

  Read the article

• Wireless on ThinkPad Edge E420s

  - by user21820

  I have installed Kubuntu 11.04 (Natty) on my ThinkPad Edge E420 laptop. Unfortunately, the wireless is not working. I have got Windows 7 installed besides Kubuntu, and wireless is working with no problems there, so it has to be problem of the OS. What I tried: I installed the official driver from Realtek RLT8192CE. After reboot the wireless didn't work, but at least the system was able to detect that it is present in the system. However, after executing lscpi -v, under the card's details there was a line "Currently used driver" which said "r8169". Why is this? I did all of this according to a manual on http://www.php-architect.com/blog/2010/05/01/getting-wireless-to-work-on-lenovo-thinkpad-t400-with-ubuntu-10-4-lucid/. There a meany other similar ones, but don't work for me either. My questions are: 1) Is there any way to get this fixed? If yes, how to do so? 2) Do you think OpenSUSE (or any other distro) is better distribution concerning such hardware issues, so should I give it a try? If yes, which distro gives me the best chance?

  Read the article

• Twinview broken on upgrade to ubuntu 10.10

  - by mapkyca

  I have been on 9.10 for over a year on the grounds that if it ain't broke, don't fix it. However, I had a spare weekend and figured it was probably about time... I performed an upgrade to 10.4, and everything seemed to proceed smoothly, so I took the plunge and went for 10.10. Disaster. My twinview Nvidia display which had been working perfectly is now broken. On boot everything seems fine, but when X starts and the second monitor springs into life the primary winks out and switches off - almost as if its been put into an unsupported display mode. The system seems to think there's a second monitor - the nvidia logo is split across the two screens, but it can't seem to start. Things I've tried: Swapping the monitors (one is older than the other, and its definitely the port not the actual monitor) Rolling back to an old Xorg conf from prior to the upgrade Installing a non-beta driver direct from Nvidia (this seems to start both monitors but then apparently stops boot and causes the second display to 'wink'. Twinview seems non-functional, both displays are mirrors) Disabling EDID Disabling twinview, logging in and attempting to use the Nvidia config to re-detect the monitors (second monitor is falsely detected and won't go higher than 1024x768. Selecting 'apply' causes one screen to go blank and the other to display garbage) googling for about 5 hours looking for similar problems, none of the offered solutions seemed to work I'm at a loss, and it is looking very much like I'm going to have to go through a time consuming reinstall to downgrade back to the working 10.4. Any thoughts?

  Read the article

• how do I fix ati driver issue

  - by Michael

  I have little knowledge about ubuntu, but I am learning. Recently, my ubuntu 12.04 required that I update. I noticed that it was updating xorg and other things, after the update I was asked to reboot. I did. now when I start that computer up, it cannot detect any display and refuses to boot from usb. I have no idea how to recover my computer. It simply starts in what is akin to the terminal program and ask for my username and password. After that, I can enter commands. The problem may be because I manually installed drivers by copy pasting from some instructional that I now have no idea where they are, but what it amounts to is that I "built" the drivers. They were working GREAT until this update. I did this because otherwise I was unable to have sound through my hdmi. After I hand built the drivers, they worked great. After this update Ka-blam! nothing... Also, I had okay-ed lots of update sources (though all of them [xorg and such] were the stable versions, not the unstable update sources) Please help and thank you in advance. (if this is posted incorrectly or misplace, please let me know what to do)

  Read the article

• alsa - sound issues on ubuntu 12.04

  - by tam_ubuuser

  i am having an sony E series laptop.i have an HDMI port .at this stage ,i have tested my sound card , which provides audio out on my laptop i.e i could hear songs .my laptop has two sound cards amd 5450 and an intel-hda(alsamixer shows that as s/pdif) . i decided to connect HDMI output to my new HD-TV.but, i could get only visuals on my TV,NO AUDIO OUTPUT ( HDMI cable works fine with win 7).my laptop has two sound cards.but i couldn't switch output to other card.( i don't know ,how to do that) i decided to update alsa. complied the following code in terminal. sudo apt-add-repository ppa:ubuntu-audio-dev/alsa-daily sudo apt-get update sudo apt-get install alsa-hda-dkms then,strangely no login sound, and no audio output on my laptop at all .then, started complied code from step1 sound troubleshooting procedure from offical ubuntu site.then, my speaker icon taskbar disappeared .obivously $aplay -l ,provided output as no soundcards detected . so , i implemented step 4 from that guide, it provides a output of all hardware devices in my laptop. *-multimedia UNCLAIMED description: Audio device product: Cedar HDMI Audio [Radeon HD 5400/6300 Series] vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0.1 bus info: pci@0000:01:00.1 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi bus_master cap_list configuration: latency=0 resources: memory:f0040000-f0043fff *-multimedia UNCLAIMED description: Audio device product: 5 Series/3400 Series Chipset High Definition Audio vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 05 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:f5e00000-f5e03fff that command displayed output name of the two cards . but , still i have no positive output on $aplay -l. so therfore, i think alsa couldn't detect my sound cards . is there solution to this problem? it could be better,if alsa would channel output from multiple sound cards ? how should install and configure alsa such that detects HDMI cable as soon i connect to my HD tv? is it possible to alsa and pluseaudio 2.0 to co-exist, if so how?

  Read the article

• Can I use my prepaid phone balance (in pesos) to buy from the Software Centre?

  - by obetus

  Using local network broadband, we can use it to buy games and applications from load balance. Is there any possible ways to use it also in Ubuntu software Center? additional: I'm using mobile broadband for the internet connection,this broadband has a sim card and account number where you can download money from buying a prepaid card worth 100 pesos,300 pesos or 500 pesos, provided by our local network. We use this mobile broadband when there is no wifi connection. There are two kinds of mobile broadband, one is postpaid account and the other is prepaid account. I use prepaid account, this kind of account can load a money for transaction like data plans, from 10 pesos for 30 minutes internet connection or 200 pesos for 5 days internet connection., and this prepaid account can load 5 pesos up to thousands of pesos. Now, if this prepaid mobile broadband can provide money in pesos and has internet connection, I think it can also use it for buying goods or applications or games via internet. i think its only need a software that can detect the sim card number and the money balance for transactions. Sorry for my bad english but I hope you got my point.

  Read the article

• touch detection of non-rectangular sprites (cocos2d)

  - by hogni89

  What is the correct way to implement a non-rectangular sprite in Cocos2d? I am working on a jigsaw puzzle. And therefor do our sprites have some strange forms (Jigsaw puzzle bricks). As of now, we have implemented the "detect" this way: - (void)selectSpriteForTouch:(CGPoint)touchLocation { CCSprite * newSprite = nil; // Loop array of sprites for (CCSprite *sprite in movableSprites) { // Check if sprite is hit. // TODO: Swap if with something better. if (CGRectContainsPoint(sprite.boundingBox, touchLocation)) { newSprite = sprite; break; } } if (newSprite != selSprite) { // Move along, nothing to see here // Not the problem } } - (BOOL)ccTouchBegan:(UITouch *)touch withEvent:(UIEvent *)event { CGPoint touchLocation = [self convertTouchToNodeSpace:touch]; [self selectSpriteForTouch:touchLocation]; return TRUE; } I know that the problem is in the keyword "sprite.boundingBox". Is there a better way of implementing this, OR is it a limit when using sprites based on .png's? If so, how should I proceed? I'm new to iPhone and game development :D

  Read the article

• What is the average page size for single page application (SPA)? [on hold]

  - by Emmanuel Istace

  I'm developing a single page application with a lot of css & javascript. For now the page is 1.3Mo composed by 5 section. Here are the rounded stats : Document : 10kb Style : 60kb Images : 450 kb (already compressed, include a big gallery thumbnails) Javascript : 700kb - 600kb of "framework" (jquery, jquery-ui, boostrap, modernizer, waypoint, ...) and 100kb of custom js. Fonts : 125kb And the site is not finished yet. (Will include gmap api, and some others...) My questions are : Do you have any statistics about the average weight of an SPA? As this is the whole website, do you think it's acceptable? Is lazy load (for images) a solution? What will be impact for SEO ? Is the "200kb rule" of google still relevant? Do you know great tools to detect which javascript code is not used during the the exection of a page and then the availability to optimize these 700kb of framework js stuffs? Can a caching strategy be an answer?

  Read the article

• Generating random tunnels

  - by IVlad

  What methods could we use to generate a random tunnel, similar to the one in this classic helicopter game? Other than that it should be smooth and allow you to navigate through it, while looking as natural as possible (not too symmetric but not overly distorted either), it should also: Most importantly - be infinite and allow me to control its thickness in time - make it narrower or wider as I see fit, when I see fit; Ideally, it should be possible to efficiently generate it with smooth curves, not rectangles as in the above game; I should be able to know in advance what its bounds are, so I can detect collisions and generate powerups inside the tunnel; Any other properties that let you have more control over it or offer optimization possibilities are welcome. Note: I'm not asking for which is best or what that game uses, which could spark extended discussion and would be subjective, I'm just asking for some methods that others know about or have used before or even think they might work. That is all, I can take it from there. Also asked on stackoverflow, where someone suggested I should ask here too. I think it fits in both places, since it's as much an algorithm question as it is a gamedev question, IMO.

  Read the article

• Grub menu not waiting despite of GRUB_TIMEOUT=10

  - by Optimus

  I have Ubuntu 12.04 installed along side of windows 7. The grub menu doesn't seem obey GRUB_TIMEOUT=10, I see the grub menu there for a split second and it immediately defaults to the first option. Grub menu worked fine when I first installed ubuntu. I am not able to pinpoint what exactly broke it(maybe some update?). I did resize my ubuntu partition using gparted but am not sure if that is what caused it. here are my settings from etc/default/grub GRUB_DEFAULT=0 #GRUB_HIDDEN_TIMEOUT=0 #GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" GRUB_CMDLINE_LINUX="" How do I fix this? Edit: As suggested by 'kamil' this is what I have tried so far with no luck - 1) hold the shift key while booting 2) sudo gedit /etc/default/grub edit GRUB_TIMEOUT to `GRUB_TIMEOUT=10` sudo update-grub 3) sudo gedit /etc/default/grub edit GRUB_TIMEOUT to `GRUB_TIMEOUT=10` sudo update-grub2 4) at the end of your /etc/grub.d/00_header file, comment out the if condition except for the regular set timeout line like this: #if [ \${recordfail} = 1 ]; then # set timeout=-1 #else set timeout=${GRUB_TIMEOUT} #fi then sudo update-grub and sudo update-grub2 5) install boot repair sudo add-apt-repository ppa:yannubuntu/boot-repair sudo apt-get update sudo apt-get install -y boot-repair boot-repair boot-repair output - Boot successfully repaired. ... The boot files of [The OS now in use - Ubuntu 12.04.1 LTS] are far from the start of the disk. Your BIOS may not detect them. You may want to retry after creating a /boot partition (EXT4, 200MB, start of the disk). This can be performed via tools such as gParted. Then select this partition via the [Separate /boot partition:] option of [Boot Repair]. (https://help.ubuntu.com/community/BootPartition) http://paste.ubuntu.com/1220468/ - here is the full boot-repair data Could grub files not being at the start of the disk create such issues?

  Read the article

< Previous Page | 96 97 98 99 100 101 102 103 104 105 106 107  | Next Page >