Search Results

Search found 3844 results on 154 pages for 'detect'.

Page 101/154 | < Previous Page | 97 98 99 100 101 102 103 104 105 106 107 108  | Next Page >

• External monitor on old Dell 700m?

  - by Adam Henne

  Okay, linux noob. I installed 10.04 on an old Dell 700m in hopes of using it as a media center device. That seems to work great, except now it won't output to the external monitor. VGA cable works fine, TV recognizes other computers fine, it's the laptop that won't output. Turns out that the 700m, unlike every other computer out there, doesn't have a Fn hotkey to switch monitors. The only way to do it in Windows was to go through the Control Panel. In Ubuntu, though, the Monitor setup won't detect or recognize any monitors. The laptop display works fine, but I can't adjust or add anything. I did a little research and found suggestions for older Ubuntu builds involving the xorg.conf. I tried one out, in spite of my unfamiliarity, and it's screwed the whole display big time. I can fix that with a clean reinstall, that's no problem, but I'm cautious about editing xorg again. Any suggestions? Thank you!

  Read the article

• How to calculate new velocities between resting objects (AABB) after accelerations?

  - by Tiedye

  lately I have been trying to create a 2D platformer engine in C++ with Direct2D. The problem I am currently having is getting objects that are resting against each other to interact correctly after accelerations like gravity have been applied to them. Right now I can detect collisions and respond to them correctly (I think) and when objects collide they remember what other objects they're resting against so objects can be pushed by other objects (note that there is no bounce in any collisions so when objects collide they are guaranteed to become resting until something else happens). Every time the simulation advances, the acceleration for objects is applied to their velocities (for example vx += ax * t, where t is time elapsed since last advancement). After these accelerations are applied, I want to check if any objects that are resting against each other are moving at different speeds than their counterparts (as different objects can have different accelerations) and depending on that difference either unlink the two objects so they are no longer resting, or even out their velocities so they are moving at the same speed once again. I am having trouble creating an algorithm that can do this across many resting objects. Here's a diagram to help explain my problem

  Read the article

• Restrict movement within a radius

  - by Phil

  I asked a similar question recently but now I think I know more about what I really want to know. I can answer my own question if I get to understand this bit. I have a situation where a sprite's center point needs to be constrained within a certain boundary in 2d space. The boundary is circular so the sprite is constrained within a radius. This radius is defined as a distance from the center of a certain point. I know the position of the center point and I can track the center position of the sprite. This is the code to detect the distance: float distance = Vector2.Distance(centerPosition, spritePosition)); if (distance > allowedDistance) { } The positions can be wherever on the grid, they are not described as in between -1 or 1. So basically the detecting code works, it only prints when the sprite is outside of it's boundary I just don't know what to do when it oversteps. Please explain any math used as I really want to understand what you're thinking to be able to elaborate on it myself.

  Read the article

• Location-Based redirection and duplication in sub-directories affecting SEO

  - by Joshua

  I currently own the website www.xyz.com. The website has a sub-directory for each of the 3 target countries: .../en-US/ (United States), .../es-MX/ (Mexico), and .../es-DO/ (Dominican Republic). I have two main questions about this setup: Currently, the main domain/root (xyz.com) contains a blank index.php file, but I would like for a user to be redirected to one of the sub-directories based on their regional location. What is the best way to accomplish this? I have looked at using browser language-based redirection, but how would I know whether to direct a user to the MX or DO site if the browser language is set to spanish? Is there a way to detect a user's geographic location? Also, the 3 websites are practically identical except they all have 3 unique color schemes and the US site is in english while the MX and DO sites are in spanish. My problem is that I believe GoogleBot is penalizing/banning my site because the spanish text on the MX and DO pages are nearly identical and are thus marked as duplicates/spam. Is there a way to avoid this?

  Read the article

• Dual displays not working - NVidia - Ubuntu 12.04 - Second Monitor - Two Screens

  - by user75105

  Graphics Card: NVidia 460 GTX. Driver: NVIDIA accelerated graphics driver (version current) I have one DVI monitor, an old Dell LCD from 2005, and one VGA monitor, an Asus ML238H from 2010 whose HDMI port broke. The Asus is plugged into my graphics card's primary monitor slot and is the better monitor even though it is VGA but my computer defaults to the Dell. This happens when I boot as well; the loading screens, the motherboard brand image, etc. are all displayed on the Dell monitor until Windows loads. Then both monitors work. The same thing happened when I booted up Ubuntu 12.04 but I did not see the second monitor when the log-in screen popped up, nor did I when I logged in. I went to System Settings/Displays and my Asus monitor is not an option. I clicked Detect Displays and the Asus is not detected. I looked at the other questions regarding NVIDIA drivers and recalled my problems with Ubuntu a few years ago and decided to check the driver. I went to Additional Drivers to install the proprietary driver and it looks like it's installed and active but I'm still having this problem. There is another driver option, the post-release NVIDIA driver, but that does not fix the problem either. Also, under System Details/Graphics the graphics device is listed as Unknown, which might indicate that it is using an open source generic driver and not the proprietary NVidia driver. But under Additional Drivers it says that I am using the NVidia driver. Any help is appreciated.

  Read the article

• fresh install of ubuntu 12.04 using usb stick booted into tty1?

  - by croc

  I just installed ubuntu 12.04 alternate for the first time to give it a try using a usb stick burned with UnetBootIn. It installed without a problem. But it booted into a tty1 console without booting into a GUI. after loging into the tty1 console i typed 'unity'. it appeared that the system doesn't have unity desktop !!! How can it be solved ? My installation didn't show any error. Something worth mentioning: 1. during installation i had to choose an option saying 'customize the system to your needs' something like that i don't remember correctly with options 'SSH server','Mail Server', 'Ubuntu Desktop',.....,'Manual selection of packages' etc. I chose 'Ubuntu Desktop'. I haven't encountered something like this in ubuntu 11.04. to do an installation of alternate iso using UnetBootIn i used '12.04_Hdmedia' option of that software and had to change file extension of .ude to .udeb in /pool/main/l/linux that i found in Alternate ubuntu cdrom detect to go around with the cdrom detection problem. I have a 945G intel graphics.

  Read the article

• Updating entities in response to collisions - should this be in the collision-detection class or in the entity-updater class?

  - by Prog

  In a game I'm working on, there's a class responsible for collision detection. It's method detectCollisions(List<Entity> entities) is called from the main gameloop. The code to update the entities (i.e. where the entities 'act': update their positions, invoke AI, etc) is in a different class, in the method updateEntities(List<Entity> entities). Also called from the gameloop, after the collision detection. When there's a collision between two entities, usually something needs to be done. For example, zero the velocity of both entities in the collision, or kill one of the entities. It would be easy to have this code in the CollisionDetector class. E.g. in psuedocode: for(Entity entityA in entities){ for(Entity entityB in entities){ if(collision(entityA, entityB)){ if(entityA instanceof Robot && entityB instanceof Robot){ entityA.setVelocity(0,0); entityB.setVelocity(0,0); } if(entityA instanceof Missile || entityB instanceof Missile){ entityA.die(); entityB.die(); } } } } However, I'm not sure if updating the state of entities in response to collision should be the job of CollisionDetector. Maybe it should be the job of EntityUpdater, which runs after the collision detection in the gameloop. Is it okay to have the code responding to collisions in the collision detection system? Or should the collision detection class only detect collisions, report them to some other class and have that class affect the state of the entities?

  Read the article

• Is there supposed to be a Windows Network folder in the file manager?

  - by Cindy

  I pulled my hard drive out of my computer and started with a bootable usb version of Ubuntu, which I am using that at this point. At first boot, I see that there is a Windows folder when browsing network. Since there is no operating system present, besides the usb that I boot from, should there be a Windows network folder? Original question First of all I just want to say, I wish I had tried Ubuntu a couple years ago when I first heard about it, but I was like a lot of the population and went with the "easy way" and stuck with Windows because I didn't want to take the time to learn something new. Well, about 3 months ago I realized someone had hacked into my computer, and then found they had hacked my facebook account so I decided I had better do a complete credit check. I found student loans (totalling about 30,000 so far) had recently showed up on my credit report. I think it's going to be a long, long road to recovery now but I'm hoping Ubuntu will be a start and definitely an eye opener. My relationship with Windows is over. I had 3 antivirus programs running, none were protecting me like I thought they were. Turned out a free program that I downloaded was the only one that could detect and clean the virus, but by then it was too late. Anyhow, my question is, I pulled my hard drive out of my computer and started with a bootable usb version of Ubuntu, which I am using that at this point. At first boot, I see that there is a Windows folder when browsing network. Since there is no operating system present, besides the usb that I boot from, should there be a Windows network folder? I am using a local ISP (and won't be much longer because I am very paranoid at this point) and I want to make sure all is ok before I put my new hard drive in and install Ubuntu. Any help would be appreciated. Also, I want to thank Ubuntu and the community for giving people an alternative.

  Read the article

• How to integrate Java ME SDK 3.2 with Eclipse

  - by SungmoonCho

  Here is also an instruction on how you can integrate Java ME SDK 3.2 with Eclipse. You need additional steps for Eclipse Juno, because it does automatically detect and download MTJ (Mobile Tools for Java) plugin. The following instruction is for Eclipse Indigo. 1. Download Java ME SDK and Eclipse plugins from here. 2. Install Java ME SDK 3. Launch Eclipse 4. Go to "Help" - "Install New Software" 5. Click "Archive", and choose the Eclipse Plugin zip file you downloaded. Name is something like "Java ME SDK Plugin" 6. Choose Java ME SDK Tools, and select "Next". 7. It will calculate requirements and dependencies. Simply follow the instruction. 8. You may also have to manually install the platform. Check out "Help" - "Preferences" - "Java ME" - "Device Management". If you do not see Java ME SDK 3.2 devices, click "Manual Install" on the right side, and specify the folder where Java ME SDK is installed. By default, it is installed at "C:\Java_ME_platform_SDK_3.2". 9. You're done. Now you can use the Java ME SDK plugins for Eclipse.

  Read the article

• Nvidia drivers with GeForce 680M problem [closed]

  - by biofermin

  Possible Duplicate: There's an issue with an Alpha/Beta Release of Ubuntu, what should I do? I have a new Alienware M17x which I have installed 64-bit Ubuntu 12.10 (dual boot). I have tried various ways to install the Nvidia drivers for the GeForce GTX 680M (which they claim they are compatible with): from Ubuntu Software Centre (though Additional Drivers fails to detect the card.) using sudo apt-get install nvidia-current downloading the drivers from nvidia and manually installing them (ctrl + alt + F6, sudo service lightdm stop, sudo ./NVIDIA*, sudo reboot) (each with a clean install of Ubuntu) but in all cases, when I reboot after installing nvidia-setings claims that I am not using the driver and should sudo nvidia-xconfig from the terminal, which I do but this has no effect and I am stuck in crappy resolution until I rm /etc/X11/xorg.conf and reboot. The xorg.conf that nvidia-xconfig generates is: Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" HorizSync 28.0 - 33.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• Less graphics power all the sudden (Intel HD 3000)

  - by queueoverflow

  I have a Intel Sandy Bridge i5 with the HD 3000 graphics card. I used to be able to play Urban Terror and Nexuiz comfortably with 85 and 60 frames per seconds until mid/end of October 2012, the former even on a full HD display with that many frames. Now I have around 30 to 45 on the smaller laptop screen and around 20 to 30 on the external monitor. Did something happen to Kubuntu 12.04 so that it has less graphics performance than previously? Update I looked into the system monitor and could not detect anything being at the maximum. The four CPU cores were pretty much bored, the 8 GB RAM were filled with maybe 2 GB. And I ran intel_cpu_top and did not notice anything at its limit. See the output. after Kernel bisecting I now did a kernel bisect and tried 3.2.0-23, 3.2.0-27, 3.2.0-29 and 3.2.0-30 and all had full graphics power. Interestingly, I then had full power when I just booted back into the regular 3.2.0-32 kernel. This does not make sense to me …

  Read the article

• Choosing a JavaScript Asynch-Loader

  - by Prisoner ZERO

  I’ve been looking at various asynchronous resource-loaders and I’m not sure which one to use yet. Where I work we have disparate group-efforts whose class-modules may use different versions of jQuery (etc). As such, nested dependencies may differ, as well. I have no control over this, so this means I need to dynamically load resources which may use alternate versions of the same library. As such, here are my requirements: Load JavaScript and CSS resource files asynchronously. Manage dependency-order and nested-dependencies across versions. Detect if a resource is already loaded. Must allow for cross-domain loading (CDN's) (optional) Allow us to unload a resource. I’ve been looking at: Curl RequireJS JavaScriptMVC LABjs I might be able to fake these requirements myself by loading versions into properly-namespaced variables & using an array to track what is already loaded...but (hopefully) someone has already invented this. So my questions are: Which ones do you use? And why? Are there others that my satisfy my requirements fully? Which do you find most eloquent and easiest to work with? And why?

  Read the article

• external usb hard drive is not being seen anymore

  - by incrediblehulk

  I think my problem is a little different than several other similar titled questions. Everything started while I was using 10.10. External drive was always recognized and mounted, but the timing of this differed. I mean when I booted, the OS sometimes saw the drive immediately, sometimes after a few minutes, sometimes after hours. Although this was annoying, I tolerated this somehow. Then this problem persisted after I upgraded to 11.04 with a clean install. Afterwards, the drive became totally invisible to the OS. It is not even detected as an usb device anymore. However, there is one thing I can do to make it seen. If I boot to another operating system which can detect the drive, and then boot back to ubuntu, everything is perfect. but this is of course very impractical. To summarize, the usb drive is recognized by ubuntu if and only if another OS in the same computer could recognize it first. I should also say I have not had any problems with the same drive in any other OS or a different computer. My drive is philips with a hitachi hdd inside, has its own power source and any other usb powered drives have never caused this kind of a problem. I've tried almost all recommendations in similar topics but none of them seems to be related to this one. What can I possibly do to fix this?

  Read the article

• after upgrade from 10.04 to 12.04 cannot boot with linux 3.2.0-24-generic-pae

  - by Ricardo

  After upgrade from 10.04 to 12.04, I cannot boot with linux 3.2.0-24-generic-pae: process gets frozen in a xubuntu initialization screen (I had qimo installed). If I try the recovery mode (with the same Linux version), booting freezes after this message: Begin: Mounting root file system. If in grub menu I choose Previous Linux versions, I can boot using Linux 2.6.32-41-generic-pae. But once logged in, some things don't seem to work (apt-get update fails, update manager fails, HID menu does not provide suggestions...) (to be honest, I have no idea whether this is part of the bigger issue) Reading in Ask Ubuntu through apparently similar problems, I decided to follow some advices: got boot-repair and run it. The problem remains & I got this report. I also run as root in terminal $ sudo update-initramfs -u and this is what I got: update-initramfs: Generating /boot/initrd.img-3.2.0-24-generic-pae cryptsetup: WARNING: failed to detect canonical device of /dev/sda1 cryptsetup: WARNING: could not determine root device from /etc/fstab /tmp/mkinitramfs_EIDlHy/scripts/classmate-bottom/45xconfig: 9: .: Can't open /scripts/casper-functions What else? My pc is Intel® Core™ i7 CPU 870 @ 2.93GHz × 8, graphs is GeForce 8400 GS/PCIe/SSE2, memory is 7,8 GiB. I have two questions: Is this a bug in the newest kernel I should report? Is there anything I can do appart from a fresh install?

  Read the article

• Fresh install of 12.04 using USB stick booted into tty1

  - by croc

  I just installed 12.04 Alternate for the first time to give it a try using a USB stick burned with UnetBootIn. It installed without a problem. But it booted into a tty1 console without booting into a GUI. After logging into the tty1 console, I typed unity. It appeared that the system doesn't have unity desktop. How can it be solved? My installation didn't show any error. Something worth mentioning: During installation, I had to choose an option saying 'customize the system to your needs' something like that I don't remember correctly with options 'SSH server','Mail Server', 'Ubuntu Desktop',.....,'Manual selection of packages' etc. I chose 'Ubuntu Desktop'. I haven't encountered something like this in 11.04. To do an installation of Alternate iso using UnetBootIn, i used '12.04_Hdmedia' option of that software and had to change file extension of .ude to .udeb in /pool/main/l/linux that i found in Alternate ubuntu cdrom detect to go around with the cdrom detection problem. I have a 945G intel graphics.

  Read the article

• GL_INVALID_OPERATION in glEnd

  - by Killrazor

  Hello, I'm having problems drawing a simple sprite. When I draw: void CSprite2D::render() { CHECKGL(glLoadIdentity()); CHECKGL(glEnable(GL_TEXTURE_2D)); CHECKGL(glEnable(GL_BLEND)); CHECKGL(glBlendFunc(GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA)); m_texture->bind(); //CHECKGL(glPushMatrix()); CHECKGL(glBegin(GL_TRIANGLE_STRIP)); CHECKGL(glNormal3i(0,0,1)); CHECKGL(glTexCoord2f(m_textureAreaStart.s,m_textureAreaStart.t)); // 0,0 by default CHECKGL(glVertex3i(m_position.x,m_position.y,0)); CHECKGL(glNormal3i(0,0,1)); CHECKGL(glTexCoord2f(m_textureAreaEnd.s,m_textureAreaStart.t)); // 1,0 by default CHECKGL(glVertex3i( m_position.x + m_dimensions.x, m_position.y, 0)); CHECKGL(glNormal3i(0,0,1)); CHECKGL(glTexCoord2f(m_textureAreaEnd.s, m_textureAreaEnd.t)); // 1,1 by default CHECKGL(glVertex3i( m_position.x + m_dimensions.x, m_position.y + m_dimensions.y, 0)); CHECKGL(glNormal3i(0,0,1)); CHECKGL(glTexCoord2f(m_textureAreaStart.s, m_textureAreaEnd.t)); // 0,1 by default CHECKGL(glVertex3i( m_position.x, m_position.y + m_dimensions.y,0)); CHECKGL(glEnd()); //CHECKGL(glPopMatrix()); CHECKGL(glDisable(GL_BLEND)); } I'm always get an GL_INVALID_OPERATION in glEnd(). I suspect that error is not here, but I can't detect where may be. Actually, the output render seems ok. But I want to solve this situation before to catch a subtle bug tomorrow. Any idea of what could be

  Read the article

• Dual displays not working - NVidia - Ubuntu 12.4

  - by user75105

  Graphics Card: NVidia 460 GTX. Driver: NVIDIA accelerated graphics driver (version current) I have one DVI monitor, an old Dell LCD from 2005, and one VGA monitor, an Asus ML238H from 2010 whose HDMI port broke. The Asus is plugged into my graphics card's primary monitor slot and is the better monitor even though it is VGA but my computer defaults to the Dell. This happens when I boot as well; the loading screens, the motherboard brand image, etc. are all displayed on the Dell monitor until Windows loads. Then both monitors work. The same thing happened when I booted up Ubuntu 12.4 but I did not see the second monitor when the log-in screen popped up, nor did I when I logged in. I went to System Settings/Displays and my Asus monitor is not an option. I clicked Detect Displays and the Asus is not detected. I looked at the other questions regarding NVIDIA drivers and recalled my problems with Ubuntu a few years ago and decided to check the driver. I went to Additional Drivers to install the proprietary driver and it looks like it's installed and active but I'm still having this problem. There is another driver option, the post-release NVIDIA driver, but that does not fix the problem either. Also, under System Details/Graphics the graphics device is listed as Unknown, which might indicate that it is using an open source generic driver and not the proprietary NVidia driver. But under Additional Drivers it says that I am using the NVidia driver. Any help is appreciated.

  Read the article

• NetworkManager detects no networks with a RTL8188CE

  - by Cormac O'Brien

  I'm on a 2011 Lenovo Thinkpad T420i with a Realtek RTL8188CE WiFi adapter. Here's the scenario: I pop in the Ubuntu LiveCD to install. Laptop detects all networks in range, I connect to my home network, internet working great. Once Ubuntu finishes installing, the home network I am connected to is the only one which appears in the applet list. Upon restarting or waking from suspend, NetworkManager does not detect any networks – it simply displays "Disconnected" under the Wireless Network section of the menu. I am able to connect to my home network by using the "Connect to Hidden Wireless Network" option and it works immediately. I have yet to test if this works with other SSIDs. I have tried reinstalling the entire OS as well as NetworkManager and my wireless drivers. For hardware info, I ran: cormac@cormac-T420:~$ sudo lshw -c network Here is the output for my wireless card: *-network description: Wireless interface product: RTL8188CE 802.11b/g/n WiFi Adapter vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 01 serial: d0:df:9a:08:73:50 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rtl8192ce driverversion=3.2.0-26-generic firmware=N/A ip=192.168.1.138 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 ioport:5000(size=256) memory:f2500000-f2503fff I can provide more information if required. This was not a problem in Natty or Oneiric. I hope this can be fixed, I don't want to have to ask for an SSID wherever I need to connect.

  Read the article

• Free movement in a tile-based isometric game

  - by xtr486

  Is there a reasonable easy way to implement free movement in a tile-based isometric game? Meaning that the player wouldn't just instantly jump from one tile to another or not be "snapped" to the grid (for example, if the movement between tiles were animated but you'd be locked from doing anything before the animation finishes). I'm a really beginner with anything related to game programming, but with the help of this site and some other resources it was quite easy to do the basic stuff, but I haven't been able to find any useful resources for this particular problem. Currently I've improvised something close to this: http://jsfiddle.net/KwW5b/4/ (WASD movement). The idea for the movement was to use the mouse map to detect when the player has moved to a different tile and then flip the offsets, and for the most part it works correctly (each corner makes the player move to wrong location: see http://www.youtube.com/watch?v=0xr15IaOhrI, which is probably because I couldn't get the full mouse map work properly), but I have no illusions that it is even close to a good/sane solution. And anyway, it's mostly just to demonstrate what kind of a thing I'd like to implement.

  Read the article

• Can't mount my USB Drive

  - by user996056

  ~> sudo mount /dev/sdb1 /media/Disk Did not find any restart pages in $LogFile and it was not empty. The file system wasn't safely closed on Windows. Fixing. I have a USB Hard Disk and Windows can't detect it. So I tried to open it up on Ubuntu using gparted. Gparted detects the NTFS partition, so everything seems to be fine (note, though, that the total size of the files in this disk is over 1 TB). I tried to mount it using: sudo mount /dev/sdb1 /media/Disk But I got: Did not find any restart pages in $LogFile and it was not empty. The file system wasn't safely closed on Windows. Fixing. Then, the process just sits there blinking. Any ideas on how to fix it? It's taking forever ( 10 minutes), should I wait or cancel it and do something else? Thank you in advance.

  Read the article

• Implementing Explosions

  - by Xkynar

  I want to add explosions to my 2D game, but im having a hard time with the architecture. Several game elements might be responsible for explosions, like, lets say, explosive barrels and bullets (and there might be chain reactions with close barrels). The only options i can come up with are: 1 - Having an array of explosions and treat them as a game element as important as any other Pros: Having a single array which is updated and drawn with all the other game element arrays makes it more organized and simple to update, and the explosive barrels at a first glance would be easy to create, simply by passing the explosion array as a pointer to each explosive barrel constructor Cons: It might be hard for the bullets to add an explosion to the vector, since bullets are shot by a Weapon class which is located in every mob, so lets say, if i create a new enemy and add it to the enemy array, that enemy will have a weapon and functions to be able to use it, and if i want the weapon (rocket launcher in this case) to have access to the explosions array to be able to add a new one, id have to pass the explosion array as a pointer to the enemy, which would then pass it to the weapon, which would pass it to the bullets (ugly chain). Another problem I can think of is a little more weird: If im checking the collisions between explosions and barrels (so i create a chain reaction) and i detect an explosion colliding with a barrel, if i add a new explosion while im iterating the explosions java will trow an exception. So this is kinda annoying, i cant iterate through the explosions and add a new explosion, i must do it in another way... The other way which isnt really well thought yet is to just add an explosive component to every element that might explode so that when it dies, it explodes or something, but i dont have good ways on implementing this theory either Honestly i dont like either the solutions so id like to know how is it usually done by actual game developers, sorry if my problem seems trivial and dumb.

  Read the article

• CentOS drive mapping? [on hold]

  - by DroidOS

  This is the first time I am posting on this particular StackExchange forum and I hope that I am using the right one for the present question. Briefly, this is what I need to do I am running a web service where users can, amongst other things, upload and store files on the server. What I want to do is to hive off user file storage to a different location so my server (CentOS 64 bit) can concentrate on what it does best - server side scripting and database management. As things stand all user files go into subdirectories in a folder called stash that lies above DOC_ROOT. What I would like to do is Transparently detect all attempts to read/write to stash/sub_folder and get/set file data on a remote server - ideally the latter would be one which replicates files like a CDN so they can be delivered from the closest/fastest location based on where the user's location. Even nicer would be if for all read accesses I could provide a URL that allows the user's browser to fetch the relevant file directly without having to funnel them via my server. I am a relative newbie when it comes to this sort of thing so I hope that I have phrased this question adequately well. From the little searching I done I gathered that WebDAV can be used to map drives to a different location on the web so perhaps that is a starting point. But if that will work I need to Establish how to get WebDAV up and running on my CentOS 64 bit server. Ideally, identify a service that allows this kind of file storage and provides an API I can use in my own scripting. I'd much appreciate any help with this.

  Read the article

• How do I get mouse x / y of the world plane in Unity?

  - by Discipol

  I am trying to make a tiled landscape. The terrain itself is not made from tiles but the world has a grid which I define. I would like to place boxes/rectangles which snap to this grid, at runtime, but in order for me to do that I must get a projection from the user screen to the real-world coordinates. I have tried various examples using the Ray class but nothing worked. It compiles and outputs a constant value no matter where I put the mouse. I have tried to add some tiles and try to detect them but no luck. I also tried with one plane as big as my world but still no luck. I am using C# but even a JS version would be helpful. This technique involves calculating which tile the mouse is under by the x and y positions. Perhaps detecting which tile itself is being pointed to would be a simpler task, at which point I can just retrieve its i/j properties. Update: I got it working thanks to some answers, but the ball freaks out towards the far end of the plane. Why is this? https://www.dropbox.com/sh/9pqnl30lm6uwm6h/AACc2JcbW16z6PuHFLLfCAX6a

  Read the article

• Dual Booting WIndows 7 and Ubuntu 12.04

  - by mfes

  I have Windows 7 32 bit installed on a 64 bit Laptop. I am trying to install Ubuntu 12.04.I am trying to install Ubuntu 12.04 using USB. I created the bootable usb using live usb installer. I have 6 partitions in Windows 7 of which in Windows 7, I created a partition of 50 GB and also having an unallocated space of 50 Gb. I will install Ubuntu 12.04 in any one of these space. When I am booting from USB and selecting the option of "Try Ubuntu" and In Ubuntu desktop, when I click "Install Ubuntu 12.04" , and choosing the option as " Something Else " ( I dont want to Install Ubuntu alongside Windows or want to erase Windows totally ), only 3 paritions getting listed. One is system memory reserved as 100 mb. Second is C drive and third partition is listed as a whole space ie remaining space of the entire hard disk is listed instead of partitions. I tried Gparted Editor and it also lists the same as Ubuntu 12.04 So whats the problem and how can I make the Ubuntu to detect all the partitions so that I can install in the unallocated space or in the 50 GB Partition ? ( P.S - When I try the same in my 32 bit desktop, it is detecting all the partitions )

  Read the article

• After installing Ubuntu my computer boots into GRUB rescue mode after displaying 'no such partition' error message.

  - by VictorVictor5

  I wanted Ubuntu on my Gateway Solo Laptop. It had Win98 on the C:\ and WinXP on the D:\. Before the install, I could not boot from CD, but I could boot from floppy. I installed Ubuntu to run alongside Windows XP as that was one of the options. It didn't detect Win98, but I swear it's on there. Install seemed fine and then it asked me to reboot. When I rebooted, I got the message error: no such partition and the grub rescue> command prompt. I've looked around, but some commands, like sudo, don't work. One command I did get to work was set root=(hd0,0) if that helps. I'm a noob, and it was a pain installing Win98 and XP since this system is so old. I don't want to wipe my drive and start all over! Additional details copied from comments Addendum, I restored my master boot record via my Win98 boot floppy and typing in frisk /mbr. But, I'd still like to get ubuntu - any help? If I restored my master boot record - did I delete Ubuntu?

  Read the article

< Previous Page | 97 98 99 100 101 102 103 104 105 106 107 108  | Next Page >