Search Results

Search found 5084 results on 204 pages for 'policy routing'.

Page 100/204 | < Previous Page | 96 97 98 99 100 101 102 103 104 105 106 107  | Next Page >

  • Other SecurityManager implementations available?

    - by mhaller
    Is there any other implementation (e.g. in an OSS project) of a Java SecurityManager available which has more features than the one in the JDK? I'm looking for features like configurable at runtime policies updateable at runtime, read from other data sources than a security.policy file Thread-aware, e.g. different policies per Thread Higher-level policies, e.g. "Disable network functions, but allow JDBC traffic" Common predefined policies, e.g. "Allow read-access to usual system properties like file.encoding or line.separator, but disallow read-access to user.home" Monitoring and audit trace logging, e.g. "Log all file access, log all network access going NOT to knownhost.example.org" Blocking jobs "requesting" a permission until an administrator grants permission, letting the thread/job continue ... I'm pretty sure that application servers (at least the commercial ones) have their own SecurityManager implementation or at least their own policy configuration. I'm wondering if there is any free project with similar requirements.

    Read the article

  • What is your company's stance on Developers using Laptops?

    - by codepunk
    I am a developer and my company is moving towards a "no laptop" policy in fear of them being lost or stolen and source code being compromised. Now I don't work for NASA, the military or anything labeled Top Secret but our code is very important to our business nonetheless (as all source code would be). I'll be honest, I disagree with this policy against laptops and wanted to see what others think. I'd like to know: What is your team/company's stance on laptops Your company's size and/or field (small, medium or large, Fortune 500, etc). Whether you've had to take any extra precautions (signing any additional legal, ensure your hard drive is encrypted, etc). Thanks!

    Read the article

  • Using JavaScript to change the URL used when a page is bookmarked...

    - by user30997
    JavaScript doesn't allow you to update window.location without triggering a reload. While I agree with this policy in principle (it shouldn't be possible to visit my website and have JavaScript change the location bar to read www.yourbankingsite.com,) I believe that it should be possible to change www.foo.org/index to www.foo.org/help. The only reason I care about this is for bookmarking. I'm working on a photo browser, and when a user is previewing a particular image, I want that image to be the default if they should bookmark that page. For example, if they are viewing foo.org/preview/images0-30 and they click on image #15, that image is expanded to a medium-sized view. If they then bookmark the page, I want the bookmark URL to be foo.org/preview/images0-30/active15. Any thoughts, or is there a security barrier on this one as well? I can certainly understand the same policy being applied here, but one can dream.

    Read the article

  • Can't get Angular Dart Router to work

    - by JesterXL
    I've tried this syntax in AngularDart 0.11.0: Angular Dart passing data from route service into a controller module.value(RouteInitializerFn, configureRoutes); void configureRoutes(Router router, RouteViewFactory views) { print("configureRoutes"); views.configure({ 'login': ngRoute( path: '/login', view: 'login/login.tpl.html'), 'today': ngRoute( path: '/today', view: '/today/today.tpl.html') }); However, my routing function never seems to get called. I've used both a print statement and breakpoint to no avail. When I attempt to call it like so: WorkoutLoggerApplication(this.rootScope, this.router) { print("WorkoutLoggerApplication::constructor"); new Future.delayed(new Duration(seconds: 2), () { router.go("login", {}); }); } I get: Bad state: Invalid route name: login I've tried 0.10.0, but no dice. I've also tried 3 varieties of the new bind function format, both also don't seem to ever fire the routing function.

    Read the article

  • SBT equivalent of Ant target

    - by adelbertc
    What is the SBT equivalent (if any) of Ant targets? For example, a snippet in a build.xml file for Ant would be: <target name="runClient" description="run client"> <java classname="client.Client" fork="true"> <jvmarg value="-Djava.rmi.server.codebase=${client_web_codebase}"/> <jvmarg value="-Djava.security.policy=policy"/> <arg value="localhost"/> <classpath> <pathelement location="dist/client.jar"/> </classpath> </java> </target> And then I would do something like ant runClient to launch the application "client.Client" with the jvmargs specified in the XML.. is there an SBT equivalent, or a way for SBT to hook into Ant to do this?

    Read the article

  • Running ASP.NET MVC 1.0 application

    - by Jack Daniels
    Hello I'm trying to build an app with ASP.NET MVC 1.0. I already have installed MVC 1.0 but after running the application It trows an exception: Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately. Compiler Error Message: CS1705: Assembly 'MVC_CustomControls, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null' uses 'System.Web.Routing, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' which has a higher version than referenced assembly 'System.Web.Routing, Version=0.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' Any help is greatly appreciated.

    Read the article

  • Permissions error for a signed Java applet when including external JAR files

    - by sri
    I have a signed Java applet. And it works fine. But now I have to integrate some 3rd party JAR files with it. When I test it from Eclipse, the whole thing works correctly. But when I test it as an applet, it gives me a FilePermission error. I thought this was because those 3rd party JAR files don't have a java.policy.applet within them. But manually adding the policy file doesn't get rid of the error. What am I missing? Thanks! ============================ All the 3rd party JAR files sit on the server filesystem like so: A.jar, B.jar, C.jar. And I include them in the applet tag like so: <applet archive="my.jar,A.jar,B.jar,C.jar"> </applet> Also, in the MANIFEST/MANIFEST.MF file in my.jar, I include those JAR files like so: Class-Path: A.jar,B.jar,C.jar

    Read the article

  • TFS 2008 ignores team project check-in settings

    - by JoshEarl
    I'm trying to set up our TFS 2008 instance to require that projects build before they can be checked in. I have created a check-in policy using the out of the box "Builds" policy, but I'm still able to check broken projects in after mangling the code and attempting to build the project. We're a small shop, and TFS was originally set up with our team's Active Directory group listed as TFS admins. Is this the problem? Do check-in policies apply to TFS admins? Any other suggestions?

    Read the article

  • AS3 / Java - Socket Connection from live Flash to local java

    - by PitchBlackCat
    Hey guys, I'm trying to get a live flash that lives on a webserver to talk to a local java server, that will live on the clients PC. I'm trying to achieve this with a socket connection. (port 6000) Now, at first flash was able to connect, but it just sends <policy-file-request/>. After this nothing happens. Now, some people at Kirupa suggested to send an cross-domain-policy xml as soon as any connection is established from the java side. http://www.kirupa.com/forum/showthread.php?t=301625 However, my java server just throws the following: End Exception: java.net.SocketException: Software caused connection abort: recv failed I've already spend a great amount of time on this subject, and was wondering if anyone here knows what to do?

    Read the article

  • No method error in controller create action

    - by user2799827
    I have read a number of Q&As on SO in search of some help on this but have so far not solved my issue. I am trying to teach myself ruby/rails, and as a test project, I want to create a list of tvshows and a list of characters where each tvshow has_many characters and each character belongs_to a specific show. I am sure I am doing something basic incorrectly. Any assistance would be greatly appreciated. here is the characters controller: class CharactersController < ApplicationController before_action :set_character, only: [:show, :edit, :update, :destroy] # GET /characters # GET /characters.json def index @characters = Character.all end # GET /characters/1 # GET /characters/1.json def show end # GET /characters/new def new @character = Character.new end # GET /characters/1/edit def edit end # POST /characters # POST /characters.json def create @character = @tvshow.characters.create(params[:character]) respond_to do |format| if @character.save format.html { redirect_to @character, notice: 'Character was successfully created.' } format.json { render action: 'show', status: :created, location: @character } else format.html { render action: 'new' } format.json { render json: @character.errors, status: :unprocessable_entity } end end end # PATCH/PUT /characters/1 # PATCH/PUT /characters/1.json def update respond_to do |format| if @character.update(character_params) format.html { redirect_to @character, notice: 'Character was successfully updated.' } format.json { head :no_content } else format.html { render action: 'edit' } format.json { render json: @character.errors, status: :unprocessable_entity } end end end # DELETE /characters/1 # DELETE /characters/1.json def destroy @character.destroy respond_to do |format| format.html { redirect_to characters_url } format.json { head :no_content } end end private # Use callbacks to share common setup or constraints between actions. def set_character @character = Character.find(params[:id]) end # Never trust parameters from the scary internet, only allow the white list through. def character_params params.require(:character).permit(:first_name, :last_name, :bio) end end character model: class Character < ActiveRecord::Base belongs_to :tvshow default_scope -> { order('created_at DESC') } validates :tvshow_id, presence: true end tvshow model: class Tvshow < ActiveRecord::Base has_many :characters, dependent: :destroy end error gets returned when I attempt to create a character. here is the full trace: app/controllers/characters_controller.rb:27:in `create' actionpack (4.0.0) lib/action_controller/metal/implicit_render.rb:4:in `send_action' actionpack (4.0.0) lib/abstract_controller/base.rb:189:in `process_action' actionpack (4.0.0) lib/action_controller/metal/rendering.rb:10:in `process_action' actionpack (4.0.0) lib/abstract_controller/callbacks.rb:18:in `block in process_action' activesupport (4.0.0) lib/active_support/callbacks.rb:413:in `_run__1211653665462320621__process_action__callbacks' activesupport (4.0.0) lib/active_support/callbacks.rb:80:in `run_callbacks' actionpack (4.0.0) lib/abstract_controller/callbacks.rb:17:in `process_action' actionpack (4.0.0) lib/action_controller/metal/rescue.rb:29:in `process_action' actionpack (4.0.0) lib/action_controller/metal/instrumentation.rb:31:in `block in process_action' activesupport (4.0.0) lib/active_support/notifications.rb:159:in `block in instrument' activesupport (4.0.0) lib/active_support/notifications/instrumenter.rb:20:in `instrument' activesupport (4.0.0) lib/active_support/notifications.rb:159:in `instrument' actionpack (4.0.0) lib/action_controller/metal/instrumentation.rb:30:in `process_action' actionpack (4.0.0) lib/action_controller/metal/params_wrapper.rb:245:in `process_action' activerecord (4.0.0) lib/active_record/railties/controller_runtime.rb:18:in `process_action' actionpack (4.0.0) lib/abstract_controller/base.rb:136:in `process' actionpack (4.0.0) lib/abstract_controller/rendering.rb:44:in `process' actionpack (4.0.0) lib/action_controller/metal.rb:195:in `dispatch' actionpack (4.0.0) lib/action_controller/metal/rack_delegation.rb:13:in `dispatch' actionpack (4.0.0) lib/action_controller/metal.rb:231:in `block in action' actionpack (4.0.0) lib/action_dispatch/routing/route_set.rb:80:in `call' actionpack (4.0.0) lib/action_dispatch/routing/route_set.rb:80:in `dispatch' actionpack (4.0.0) lib/action_dispatch/routing/route_set.rb:48:in `call' actionpack (4.0.0) lib/action_dispatch/journey/router.rb:71:in `block in call' actionpack (4.0.0) lib/action_dispatch/journey/router.rb:59:in `each' actionpack (4.0.0) lib/action_dispatch/journey/router.rb:59:in `call' actionpack (4.0.0) lib/action_dispatch/routing/route_set.rb:655:in `call' rack (1.5.2) lib/rack/etag.rb:23:in `call' rack (1.5.2) lib/rack/conditionalget.rb:35:in `call' rack (1.5.2) lib/rack/head.rb:11:in `call' actionpack (4.0.0) lib/action_dispatch/middleware/params_parser.rb:27:in `call' actionpack (4.0.0) lib/action_dispatch/middleware/flash.rb:241:in `call' rack (1.5.2) lib/rack/session/abstract/id.rb:225:in `context' rack (1.5.2) lib/rack/session/abstract/id.rb:220:in `call' actionpack (4.0.0) lib/action_dispatch/middleware/cookies.rb:486:in `call' activerecord (4.0.0) lib/active_record/query_cache.rb:36:in `call' activerecord (4.0.0) lib/active_record/connection_adapters/abstract/connection_pool.rb:626:in `call' activerecord (4.0.0) lib/active_record/migration.rb:369:in `call' actionpack (4.0.0) lib/action_dispatch/middleware/callbacks.rb:29:in `block in call' activesupport (4.0.0) lib/active_support/callbacks.rb:373:in `_run__2792846465963916895__call__callbacks' activesupport (4.0.0) lib/active_support/callbacks.rb:80:in `run_callbacks' actionpack (4.0.0) lib/action_dispatch/middleware/callbacks.rb:27:in `call' actionpack (4.0.0) lib/action_dispatch/middleware/reloader.rb:64:in `call' actionpack (4.0.0) lib/action_dispatch/middleware/remote_ip.rb:76:in `call' actionpack (4.0.0) lib/action_dispatch/middleware/debug_exceptions.rb:17:in `call' actionpack (4.0.0) lib/action_dispatch/middleware/show_exceptions.rb:30:in `call' railties (4.0.0) lib/rails/rack/logger.rb:38:in `call_app' railties (4.0.0) lib/rails/rack/logger.rb:21:in `block in call' activesupport (4.0.0) lib/active_support/tagged_logging.rb:67:in `block in tagged' activesupport (4.0.0) lib/active_support/tagged_logging.rb:25:in `tagged' activesupport (4.0.0) lib/active_support/tagged_logging.rb:67:in `tagged' railties (4.0.0) lib/rails/rack/logger.rb:21:in `call' actionpack (4.0.0) lib/action_dispatch/middleware/request_id.rb:21:in `call' rack (1.5.2) lib/rack/methodoverride.rb:21:in `call' rack (1.5.2) lib/rack/runtime.rb:17:in `call' activesupport (4.0.0) lib/active_support/cache/strategy/local_cache.rb:83:in `call' rack (1.5.2) lib/rack/lock.rb:17:in `call' actionpack (4.0.0) lib/action_dispatch/middleware/static.rb:64:in `call' railties (4.0.0) lib/rails/engine.rb:511:in `call' railties (4.0.0) lib/rails/application.rb:97:in `call' rack (1.5.2) lib/rack/lock.rb:17:in `call' rack (1.5.2) lib/rack/content_length.rb:14:in `call' rack (1.5.2) lib/rack/handler/webrick.rb:60:in `service' /Users/dariusgoore/.rvm/rubies/ruby-1.9.3-p194/lib/ruby/1.9.1/webrick/httpserver.rb:138:in `service' /Users/dariusgoore/.rvm/rubies/ruby-1.9.3-p194/lib/ruby/1.9.1/webrick/httpserver.rb:94:in `run' /Users/dariusgoore/.rvm/rubies/ruby-1.9.3-p194/lib/ruby/1.9.1/webrick/server.rb:191:in `block in start_thread'

    Read the article

  • Should a company prevent employees from publishing an app in an appstore in their free time?

    - by Tommy
    My company is trying to pass a policy forbidding distribution of any application (even free) in any appstore for all developers. Their reasoning is that "outside work activities create a conflict of interest". They don't want that "you use your spare time to work on your app, and once it takes off you quit your job" (quoting the Head of Development). A few developers (myself included) have already said it was an abusive, pointless and most of all counter-productive policy (developers will actually be demotivated to work here under such control and to be denied of the freedom to distribute their project). Personally, I think it is actually in the interest of the company to promote side projects (even commercial activities, if there is no conflict). I'm also curious, is that common practice?

    Read the article

  • Windows 2008 unable to execute c# powershell app. Returning access exception.

    - by scope-creep
    Hi, Does anybody know why I can't access the folder where my powershell scripts are in windows 2008 Ent. When I try to create a script with textpad it craps out. When I try and execute a c# powershell app, which is stored on another win 2003 drive, it craps out with an access exception as well. I've set powershell execution policy to unrestricted for both normal users and admin users with 'run as admin' on powershell, but it doesn't seem to make a difference. There must be a policy setting, doesn't allow scripts access to a directory, but where, and how to set it. Any help would be appreciated. scope_creep

    Read the article

  • Log On As A Service Permission getting removed

    - by VicF
    We have PC's that are in a domain that run a windows service on startup. They continually are having the Log On As A Service permission removed for the domain account that is running the service. So when the PC restarts the service won't run. We can re-add the permission by hand to the Group Policy on the machine or retype the password on the service (which grants the permission) and it runs fine for a day or so. What could be removing it? Could it be a Default Policy that does not have this domain account being applied to the PCs thus removing the Log On As A Service permission?

    Read the article

  • OpenVPN: Connection established but can’t connect to server

    - by Maik
    I am trying to set up OpenVPN to allow me to connect a number of laptops to my network in a way that allows the laptops to connect to specific computers via HTTP (to e.g. a server management page) and windows shares (to access files) In the test environment my laptops live in a network with a 192.168.1.X address range. The host-network has a 10.66.77.X address range The server hosting the OpenVPN server has address 10.77.10.20. I need to access some application server web pages on this machine, accessible on various ports The server with the windows shares as well as some other web based pages I need to access is on address 10.66.77.20 The config files for server and laptop are attached below. The laptop establishes the VPN connection without problems, but I cannot access any of the machines, even a simple ping fails. Maybe a routing problem? The routing table for the laptop is shown below as well - every idea is appreciated! Thanks! Maik Server config file port 1194 dev tun tls-server ca /etc/openvpn/keys/ca.crt cert /etc/openvpn/keys/projects.crt key /etc/openvpn/keys/projects.key dh /etc/openvpn/keys/dh1024.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt push "route 10.66.77.0 255.255.255.0" keepalive 10 60 inactive 600 route 10.8.0.1 255.255.255.0 user openvpn group openvpn persist-tun persist-key verb 4 client config file dev tun proto udp remote SERVERADDR 1194 resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert accountingLaptop.crt key accountingLaptop.key ns-cert-type server comp-lzo verb 3 Resulting routing table on client laptop C:\Documents and Settings\User>route print =========================================================================== Interface List 0x1 ........................... MS TCP Loopback interface 0x2 ...00 23 5a 9b 64 9b ...... Atheros AR8132 PCI-E Fast Ethernet Controller - Packet Scheduler Miniport 0x3 ...00 24 2c 35 c9 6b ...... Dell Wireless 1395 WLAN Mini-Card - Packet Sched uler Miniport 0x4 ...00 ff 5e 03 43 9b ...... TAP-Win32 Adapter V9 - Packet Scheduler Miniport =========================================================================== =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.129 25 10.8.0.1 255.255.255.255 10.8.0.5 10.8.0.6 1 10.8.0.4 255.255.255.252 10.8.0.6 10.8.0.6 30 10.8.0.6 255.255.255.255 127.0.0.1 127.0.0.1 30 10.66.77.0 255.255.255.0 10.8.0.5 10.8.0.6 1 10.255.255.255 255.255.255.255 10.8.0.6 10.8.0.6 30 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 192.168.1.0 255.255.255.0 192.168.1.129 192.168.1.129 25 192.168.1.129 255.255.255.255 127.0.0.1 127.0.0.1 25 192.168.1.255 255.255.255.255 192.168.1.129 192.168.1.129 25 224.0.0.0 240.0.0.0 10.8.0.6 10.8.0.6 30 224.0.0.0 240.0.0.0 192.168.1.129 192.168.1.129 25 255.255.255.255 255.255.255.255 10.8.0.6 2 1 255.255.255.255 255.255.255.255 10.8.0.6 10.8.0.6 1 255.255.255.255 255.255.255.255 192.168.1.129 192.168.1.129 1 Default Gateway: 192.168.1.1 =========================================================================== Persistent Routes: None

    Read the article

  • Useful Command-line Commands on Windows

    - by Sung Meister
    The aim for this Wiki is to promote using a command to open up commonly used applications without having to go through many mouse clicks - thus saving time on monitoring and troubleshooting Windows machines. Answer entries need to specify Application name Commands Screenshot (Optional) Shortcut to commands && - Command Chaining %SYSTEMROOT%\System32\rcimlby.exe -LaunchRA - Remote Assistance (Windows XP) appwiz.cpl - Programs and Features (Formerly Known as "Add or Remove Programs") appwiz.cpl @,2 - Turn Windows Features On and Off (Add/Remove Windows Components pane) arp - Displays and modifies the IP-to-Physical address translation tables used by address resolution protocol (ARP) at - Schedule tasks either locally or remotely without using Scheduled Tasks bootsect.exe - Updates the master boot code for hard disk partitions to switch between BOOTMGR and NTLDR cacls - Change Access Control List (ACL) permissions on a directory, its subcontents, or files calc - Calculator chkdsk - Check/Fix the disk surface for physical errors or bad sectors cipher - Displays or alters the encryption of directories [files] on NTFS partitions cleanmgr.exe - Disk Cleanup clip - Redirects output of command line tools to the Windows clipboard cls - clear the command line screen cmd /k - Run command with command extensions enabled color - Sets the default console foreground and background colors in console command.com - Default Operating System Shell compmgmt.msc - Computer Management control.exe /name Microsoft.NetworkAndSharingCenter - Network and Sharing Center control keyboard - Keyboard Properties control mouse(or main.cpl) - Mouse Properties control sysdm.cpl,@0,3 - Advanced Tab of the System Properties dialog control userpasswords2 - Opens the classic User Accounts dialog desk.cpl - opens the display properties devmgmt.msc - Device Manager diskmgmt.msc - Disk Management diskpart - Disk management from the command line dsa.msc - Opens active directory users and computers dsquery - Finds any objects in the directory according to criteria dxdiag - DirectX Diagnostic Tool eventvwr - Windows Event Log (Event Viewer) explorer . - Open explorer with the current folder selected. explorer /e, . - Open explorer, with folder tree, with current folder selected. F7 - View command history find - Searches for a text string in a file or files findstr - Find a string in a file firewall.cpl - Opens the Windows Firewall settings fsmgmt.msc - Shared Folders fsutil - Perform tasks related to FAT and NTFS file systems ftp - Transfers files to and from a computer running an FTP server service getmac - Shows the mac address(es) of your network adapter(s) gpedit.msc - Group Policy Editor gpresult - Displays the Resultant Set of Policy (RSoP) information for a target user and computer httpcfg.exe - HTTP Configuration Utility iisreset - To restart IIS InetMgr.exe - Internet Information Services (IIS) Manager 7 InetMgr6.exe - Internet Information Services (IIS) Manager 6 intl.cpl - Regional and Language Options ipconfig - Internet protocol configuration lusrmgr.msc - Local Users and Groups Administrator msconfig - System Configuration notepad - Notepad? ;) mmsys.cpl - Sound/Recording/Playback properties mode - Configure system devices more - Displays one screen of output at a time mrt - Microsoft Windows Malicious Software Removal Tool mstsc.exe - Remote Desktop Connection nbstat - displays protocol statistics and current TCP/IP connections using NBT ncpa.cpl - Network Connections netsh - Display or modify the network configuration of a computer that is currently running netstat - Network Statistics net statistics - Check computer up time net stop - Stops a running service. net use - Connects a computer to or disconnects a computer from a shared resource, or displays information about computer connections odbcad32.exe - ODBC Data Source Administrator pathping - A traceroute that collects detailed packet loss stats perfmon - Opens Reliability and Performance Monitor ping - Determine whether a remote computer is accessible over the network powercfg.cpl - Power management control panel applet quser - Display information about user sessions on a terminal server qwinsta - See disconnected remote desktop sessions reg.exe - Console Registry Tool for Windows regedit - Registry Editor rasdial - Connects to a VPN or a dialup network robocopy - Backup/Restore/Copy large amounts of files reliably rsop.msc - Resultant Set of Policy (shows the combined effect of all group policies active on the current system/login) runas - Run specific tools and programs with different permissions than the user's current logon provides sc - Manage anything you want to do with services. schtasks - Enables an administrator to create, delete, query, change, run and end scheduled tasks on a local or remote system. secpol.msc - Local Security Settings services.msc - Services control panel set - Displays, sets, or removes cmd.exe environment variables. set DIRCMD - Preset dir parameter in cmd.exe start - Starts a separate window to run a specified program or command start. - opens the current directory in the Windows Explorer. shutdown.exe - Shutdown or Reboot a local/remote machine subst.exe - Associates a path with a drive letter, including local drives systeminfo -Displays a comprehensive information about the system taskkill - terminate tasks by process id (PID) or image name tasklist.exe - List Processes on local or a remote machine taskmgr.exe - Task Manager telephon.cpl - Telephone and Modem properties timedate.cpl - Date and Time title - Change the title of the CMD window you have open tracert - Trace route wmic - Windows Management Instrumentation Command-line winver.exe - Find Windows Version wscui.cpl - Windows Security Center wuauclt.exe - Windows Update AutoUpdate Client

    Read the article

  • Cannot ping Localhost so I can't shutdown Tomcat

    - by gav
    Hi, I installed Tomcat 6 using the tar-ball via wget. Startup of the server is fine but on shutdown I get a timeout exception. root@88:/usr/local/tomcat/logs# /usr/local/tomcat/bin/shutdown.sh Using CATALINA_BASE: /usr/local/tomcat Using CATALINA_HOME: /usr/local/tomcat Using CATALINA_TMPDIR: /usr/local/tomcat/temp Using JRE_HOME: /usr Using CLASSPATH: /usr/local/tomcat/bin/bootstrap.jar 30-Mar-2010 17:33:41 org.apache.catalina.startup.Catalina stopServer SEVERE: Catalina.stop: java.net.ConnectException: Connection timed out at java.net.PlainSocketImpl.socketConnect(Native Method) at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333) at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195) at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182) at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366) ... I read that this might be because I have a firewall blocking incoming connections on the shutdown port (8005). I have a default Ubuntu 9.04 installation running on a VPS with no rules in my iptables. How can I tell if that port is blocked? How can I check that the server is listening for connections on 8005? Bizarrely pinging localhost or the IP of my server fails from the server itself, whereas pinging the IP of my server from another machine succeeds. -------- EDIT -------- (In reply to Davey) Thanks for all the tips and suggestions! netstat -nlp Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 127.0.0.1:8005 0.0.0.0:* LISTEN 9611/java tcp 0 0 127.0.0.1:3306 0.0.0.0:* LISTEN 28505/mysqld tcp 0 0 0.0.0.0:8080 0.0.0.0:* LISTEN 9611/java tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN ... So we can see that tomcat is listening, I just don't seem to be able to reach it. root@88:/usr/local/tomcat# telnet localhost 8005 Trying 127.0.0.1... Trying to telnet to the port Hangs indefinitely. I have no rules in my iptables so I don't think it's a firewall thing. root@88:/usr/local/tomcat# iptables --list Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination This is the contents of /etc/hosts 127.0.0.1 localhost.localdomain localhost # Auto-generated hostname. Please do not remove this comment. 88.198.31.14 88.198.31.14 88 88 But I still can't ping localhost... do I need to check a loopback device is enabled properly or something? (I'm unsure how to do that if you do say yes :)). root@88:/usr/local/tomcat# ping localhost PING localhost (127.0.0.1) 56(84) bytes of data. --- localhost ping statistics --- 7 packets transmitted, 0 received, 100% packet loss, time 5999ms Trying to find out what the loop back is configured as; root@88:~# ifconfig lo lo Link encap:Local Loopback LOOPBACK MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) SOLUTION THANKS TO DAVEY I needed to bring up the interface (Not sure why it wasn't running). ifconfig lo up did the trick. root@88:~# ifconfig lo up root@88:~# ifconfig lo lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) root@88:~# ping localhost PING localhost.localdomain (127.0.0.1) 56(84) bytes of data. 64 bytes from localhost.localdomain (127.0.0.1): icmp_seq=1 ttl=64 time=0.025 ms Thanks again, Gav

    Read the article

  • iptable CLUSTERIP won't work

    - by Rad Akefirad
    We have some requirements which explained here. We tried to satisfy them without any success as described. Here is the brief information: Here are requirements: 1. High Availability 2. Load Balancing Current Configuration: Server #1: one static (real) IP for each 10.17.243.11 Server #2: one static (real) IP for each 10.17.243.12 Cluster (virtual and shared among all servers) IP: 10.17.243.15 I tried to use CLUSTERIP to have the cluster IP by the following: on the server #1 iptables -I INPUT -i eth0 -d 10.17.243.15 -j CLUSTERIP --new --hashmode sourceip --clustermac 01:00:5E:00:00:20 --total-nodes 2 --local-node 1 on the server #2 iptables -I INPUT -i eth0 -d 10.17.243.15 -j CLUSTERIP --new --hashmode sourceip --clustermac 01:00:5E:00:00:20 --total-nodes 2 --local-node 2 When we try to ping 10.17.243.15 there is no reply. And the web service (tomcat on port 8080) is not accessible either. However we managed to get the packets on both servers by using TCPDUMP. Some useful information: iptable roules (iptables -L -n -v): Chain INPUT (policy ACCEPT 21775 packets, 1470K bytes) pkts bytes target prot opt in out source destination 0 0 CLUSTERIP all -- eth0 * 0.0.0.0/0 10.17.243.15 CLUSTERIP hashmode=sourceip clustermac=01:00:5E:00:00:20 total_nodes=2 local_node=1 hash_init=0 Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 14078 packets, 44M bytes) pkts bytes target prot opt in out source destination Log messages: ... kernel: [ 7.329017] e1000e: eth3 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None ... kernel: [ 7.329133] e1000e 0000:05:00.0: eth3: 10/100 speed: disabling TSO ... kernel: [ 7.329567] ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready ... kernel: [ 71.333285] ip_tables: (C) 2000-2006 Netfilter Core Team ... kernel: [ 71.341804] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ... kernel: [ 71.343168] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully ... kernel: [ 108.456043] device eth0 entered promiscuous mode ... kernel: [ 112.678859] device eth0 left promiscuous mode ... kernel: [ 117.916050] device eth0 entered promiscuous mode ... kernel: [ 140.168848] device eth0 left promiscuous mode TCPDUMP while pinging: tcpdump: listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes 12:11:55.335528 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto ICMP (1), length 84) 10.17.243.1 > 10.17.243.15: ICMP echo request, id 16162, seq 2390, length 64 12:11:56.335778 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto ICMP (1), length 84) 10.17.243.1 > 10.17.243.15: ICMP echo request, id 16162, seq 2391, length 64 12:11:57.336010 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto ICMP (1), length 84) 10.17.243.1 > 10.17.243.15: ICMP echo request, id 16162, seq 2392, length 64 12:11:58.336287 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto ICMP (1), length 84) 10.17.243.1 > 10.17.243.15: ICMP echo request, id 16162, seq 2393, length 64 And there is no ping reply as I said. Does anyone know which part I missed? Thanks in advance.

    Read the article

  • NFS Mounts Issues

    - by user554005
    Having some issue with a NFS Setup on the clients it just times out refuses to connect [root@host9 ~]# mount 192.168.0.17:/home/export /mnt/export mount: mount to NFS server '192.168.0.17' failed: timed out (retrying). mount: mount to NFS server '192.168.0.17' failed: timed out (retrying). mount: mount to NFS server '192.168.0.17' failed: timed out (retrying). mount: mount to NFS server '192.168.0.17' failed: timed out (retrying). Here are the settings I'm using: [root@host17 /home/export]# cat /etc/hosts.allow # # hosts.allow This file contains access rules which are used to # allow or deny connections to network services that # either use the tcp_wrappers library or that have been # started through a tcp_wrappers-enabled xinetd. # # See 'man 5 hosts_options' and 'man 5 hosts_access' # for information on rule syntax. # See 'man tcpd' for information on tcp_wrappers # portmap: 192.168.0.0/255.255.255.0 lockd: 192.168.0.0/255.255.255.0 rquotad: 192.168.0.0/255.255.255.0 mountd: 192.168.0.0/255.255.255.0 statd: 192.168.0.0/255.255.255.0 [root@host17 /home/export]# cat /etc/hosts.deny # # hosts.deny This file contains access rules which are used to # deny connections to network services that either use # the tcp_wrappers library or that have been # started through a tcp_wrappers-enabled xinetd. # # The rules in this file can also be set up in # /etc/hosts.allow with a 'deny' option instead. # # See 'man 5 hosts_options' and 'man 5 hosts_access' # for information on rule syntax. # See 'man tcpd' for information on tcp_wrappers # portmap:ALL lockd:ALL mountd:ALL rquotad:ALL statd:ALL [root@host17 /home/export]# cat /etc/exports /home/export 192.168.0.0/255.255.255.0(rw) [root@host17 /home/export]# iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination RH-Firewall-1-INPUT all -- anywhere anywhere Chain FORWARD (policy ACCEPT) target prot opt source destination RH-Firewall-1-INPUT all -- anywhere anywhere Chain OUTPUT (policy ACCEPT) target prot opt source destination Chain RH-Firewall-1-INPUT (2 references) target prot opt source destination ACCEPT all -- anywhere anywhere ACCEPT icmp -- anywhere anywhere icmp any ACCEPT esp -- anywhere anywhere ACCEPT ah -- anywhere anywhere ACCEPT udp -- anywhere 224.0.0.251 udp dpt:mdns ACCEPT udp -- anywhere anywhere udp dpt:ipp ACCEPT tcp -- anywhere anywhere tcp dpt:ipp ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT tcp -- anywhere anywhere state NEW tcp dpt:ssh ACCEPT tcp -- anywhere anywhere state NEW tcp dpt:http ACCEPT tcp -- anywhere anywhere state NEW tcp dpt:https ACCEPT tcp -- anywhere anywhere state NEW tcp dpt:6379 ACCEPT udp -- 192.168.0.0/24 anywhere state NEW udp dpt:sunrpc ACCEPT tcp -- 192.168.0.0/24 anywhere state NEW tcp dpt:sunrpc ACCEPT tcp -- 192.168.0.0/24 anywhere state NEW tcp dpt:nfs ACCEPT tcp -- 192.168.0.0/24 anywhere state NEW tcp dpt:32803 ACCEPT udp -- 192.168.0.0/24 anywhere state NEW udp dpt:filenet-rpc ACCEPT tcp -- 192.168.0.0/24 anywhere state NEW tcp dpt:892 ACCEPT udp -- 192.168.0.0/24 anywhere state NEW udp dpt:892 ACCEPT tcp -- 192.168.0.0/24 anywhere state NEW tcp dpt:rquotad ACCEPT udp -- 192.168.0.0/24 anywhere state NEW udp dpt:rquotad ACCEPT tcp -- 192.168.0.0/24 anywhere state NEW tcp dpt:pftp ACCEPT udp -- 192.168.0.0/24 anywhere state NEW udp dpt:pftp REJECT all -- anywhere anywhere reject-with icmp-host-prohibited on the clients here is some rpcinfos [root@host9 ~]# rpcinfo -p 192.168.0.17 program vers proto port 100000 4 tcp 111 portmapper 100000 3 tcp 111 portmapper 100000 2 tcp 111 portmapper 100000 4 udp 111 portmapper 100000 3 udp 111 portmapper 100000 2 udp 111 portmapper 100011 1 udp 875 rquotad 100011 2 udp 875 rquotad 100011 1 tcp 875 rquotad 100011 2 tcp 875 rquotad 100005 1 udp 45857 mountd 100005 1 tcp 55772 mountd 100005 2 udp 34021 mountd 100005 2 tcp 59542 mountd 100005 3 udp 60930 mountd 100005 3 tcp 53086 mountd 100003 2 udp 2049 nfs 100003 3 udp 2049 nfs 100003 4 udp 2049 nfs 100227 2 udp 2049 nfs_acl 100227 3 udp 2049 nfs_acl 100003 2 tcp 2049 nfs 100003 3 tcp 2049 nfs 100003 4 tcp 2049 nfs 100227 2 tcp 2049 nfs_acl 100227 3 tcp 2049 nfs_acl 100021 1 udp 59832 nlockmgr 100021 3 udp 59832 nlockmgr 100021 4 udp 59832 nlockmgr 100021 1 tcp 36140 nlockmgr 100021 3 tcp 36140 nlockmgr 100021 4 tcp 36140 nlockmgr 100024 1 udp 46494 status 100024 1 tcp 49672 status [root@host9 ~]# [root@host9 ~]# rpcinfo -u 192.168.0.17 nfs rpcinfo: RPC: Timed out program 100003 version 0 is not available [root@host9 ~]# rpcinfo -u 192.168.0.17 portmap program 100000 version 2 ready and waiting program 100000 version 3 ready and waiting program 100000 version 4 ready and waiting [root@host9 ~]# rpcinfo -u 192.168.0.17 mount rpcinfo: RPC: Timed out program 100005 version 0 is not available [root@host9 ~]# I'm running CentOS 5.8 on all systems

    Read the article

  • virturalmin webmin dose not respond

    - by Miranda
    I have installed Virtualmin on a CentOS remote server, but it dose not seem to work https://115.146.95.118:10000/ at least the Webmin page dose not work. I have opened those ports http ALLOW 80:80 from 0.0.0.0/0 ALLOW 443:443 from 0.0.0.0/0 ssh ALLOW 22:22 from 0.0.0.0/0 virtualmin ALLOW 20000:20000 from 0.0.0.0/0 ALLOW 10000:10009 from 0.0.0.0/0 And restarting Webmin dose not solve it: /etc/rc.d/init.d/webmin restart Stopping Webmin server in /usr/libexec/webmin Starting Webmin server in /usr/libexec/webmin And I have tried to use Amazon EC2 this time, still couldn't get it to work. http://ec2-67-202-21-21.compute-1.amazonaws.com:10000/ [ec2-user@ip-10-118-239-13 ~]$ netstat -an | grep :10000 tcp 0 0 0.0.0.0:10000 0.0.0.0:* LISTEN udp 0 0 0.0.0.0:10000 0.0.0.0:* [ec2-user@ip-10-118-239-13 ~]$ sudo iptables -L -n Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:20 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:21 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:53 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:20000 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:10000 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:443 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:993 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:143 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:995 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:110 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:20 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:21 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:53 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:587 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:25 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination Since I need more than 10 reputation to post image, you can find the screenshots of the security group setting at the Webmin Support Forum. I have tried: sudo iptables -A INPUT -p tcp -m tcp --dport 10000 -j ACCEPT It did not change anything. [ec2-user@ip-10-118-239-13 ~]$ sudo yum install openssl perl-Net-SSLeay perl-Crypt-SSLeay Loaded plugins: fastestmirror, priorities, security, update-motd Loading mirror speeds from cached hostfile * amzn-main: packages.us-east-1.amazonaws.com * amzn-updates: packages.us-east-1.amazonaws.com amzn-main | 2.1 kB 00:00 amzn-updates | 2.3 kB 00:00 Setting up Install Process Package openssl-1.0.0j-1.43.amzn1.i686 already installed and latest version Package perl-Net-SSLeay-1.35-9.4.amzn1.i686 already installed and latest version Package perl-Crypt-SSLeay-0.57-16.4.amzn1.i686 already installed and latest version Nothing to do [ec2-user@ip-10-118-239-13 ~]$ nano /etc/webmin/miniserv.conf GNU nano 2.0.9 File: /etc/webmin/miniserv.conf port=10000 root=/usr/libexec/webmin mimetypes=/usr/libexec/webmin/mime.types addtype_cgi=internal/cgi realm=Webmin Server logfile=/var/webmin/miniserv.log errorlog=/var/webmin/miniserv.error pidfile=/var/webmin/miniserv.pid logtime=168 ppath= ssl=1 env_WEBMIN_CONFIG=/etc/webmin env_WEBMIN_VAR=/var/webmin atboot=1 logout=/etc/webmin/logout-flag listen=10000 denyfile=\.pl$ log=1 blockhost_failures=5 blockhost_time=60 syslog=1 session=1 server=MiniServ/1.585 userfile=/etc/webmin/miniserv.users keyfile=/etc/webmin/miniserv.pem passwd_file=/etc/shadow passwd_uindex=0 passwd_pindex=1 passwd_cindex=2 passwd_mindex=4 passwd_mode=0 preroot=virtual-server-theme passdelay=1 sessiononly=/virtual-server/remote.cgi preload= mobile_preroot=virtual-server-mobile mobile_prefixes=m. mobile. anonymous=/virtualmin-mailman/unauthenticated=anonymous ssl_cipher_list=ECDHE-RSA-AES256-SHA384:AES256-SHA256:AES256-SHA256:RC4:HIGH:MEDIUM:+TLSv1:!MD5:!SSLv2:+SSLv3:!ADH:!aNULL:!eNULL:!NULL:!DH:!ADH:!EDH:!AESGCM

    Read the article

  • Cannot connect to MySQL Server on RHEL 5.7

    - by Jeffrey Wong
    I have a standard MySQL Server running on Red hat 5.7. I have edited /etc/my.cnf to specify the bind address as my server's public IP address. [mysqld] datadir=/var/lib/mysql socket=/var/lib/mysql/mysql.sock user=mysql # Default to using old password format for compatibility with mysql 3.x # clients (those using the mysqlclient10 compatibility package). old_passwords=1 # Disabling symbolic-links is recommended to prevent assorted security risks ; # to do so, uncomment this line: # symbolic-links=0 [mysqld_safe] log-error=/var/log/mysqld.log pid-file=/var/run/mysqld/mysqld.pid bind-address=171.67.88.25 port=3306 And I have also restarted my firewall sudo /sbin/iptables -A INPUT -i eth0 -p tcp --destination-port 3306 -j ACCEPT /sbin/service iptables save The network administrator has already opened port 3306 for this box. When connecting from a remote computer (running Ubuntu 10.10, server is running RHEL 5.7), I issue mysql -u jeffrey -p --host=171.67.88.25 --port=3306 --socket=/var/lib/mysql/mysql.sock but receive a ERROR 2003 (HY000): Can't connect to MySQL server on '171.67.88.25' (113). I've noticed that the socket file /var/lib/mysql/mysql.sock is blank. Should this be the case? UPDATE The result of netstat -an | grep 3306 tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN Result of sudo netstat -tulpen Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:2208 0.0.0.0:* LISTEN 0 7602 3168/hpiod tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN 27 7827 3298/mysqld tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 5110 2802/portmap tcp 0 0 0.0.0.0:8787 0.0.0.0:* LISTEN 0 8431 3326/rserver tcp 0 0 0.0.0.0:915 0.0.0.0:* LISTEN 0 5312 2853/rpc.statd tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 7655 3188/sshd tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 7688 3199/cupsd tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 0 8025 3362/sendmail: acce tcp 0 0 127.0.0.1:2207 0.0.0.0:* LISTEN 0 7620 3173/python udp 0 0 0.0.0.0:909 0.0.0.0:* 0 5300 2853/rpc.statd udp 0 0 0.0.0.0:912 0.0.0.0:* 0 5309 2853/rpc.statd udp 0 0 0.0.0.0:68 0.0.0.0:* 0 4800 2598/dhclient udp 0 0 0.0.0.0:36177 0.0.0.0:* 70 8314 3476/avahi-daemon: udp 0 0 0.0.0.0:5353 0.0.0.0:* 70 8313 3476/avahi-daemon: udp 0 0 0.0.0.0:111 0.0.0.0:* 0 5109 2802/portmap udp 0 0 0.0.0.0:631 0.0.0.0:* 0 7691 3199/cupsd Result of sudo /sbin/iptables -L -v -n Chain INPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 6373 2110K RH-Firewall-1-INPUT all -- * * 0.0.0.0/0 0.0.0.0/0 Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 RH-Firewall-1-INPUT all -- * * 0.0.0.0/0 0.0.0.0/0 Chain OUTPUT (policy ACCEPT 1241 packets, 932K bytes) pkts bytes target prot opt in out source destination Chain RH-Firewall-1-INPUT (2 references) pkts bytes target prot opt in out source destination 572 861K ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 1 28 ACCEPT icmp -- * * 0.0.0.0/0 0.0.0.0/0 icmp type 255 0 0 ACCEPT esp -- * * 0.0.0.0/0 0.0.0.0/0 0 0 ACCEPT ah -- * * 0.0.0.0/0 0.0.0.0/0 46 6457 ACCEPT udp -- * * 0.0.0.0/0 224.0.0.251 udp dpt:5353 0 0 ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0/0 udp dpt:631 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:631 782 157K ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 2 120 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:22 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:443 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:23 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:80 4970 1086K REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-host-prohibited Result of nmap -P0 -p3306 171.67.88.25 Host is up (0.027s latency). PORT STATE SERVICE 3306/tcp filtered mysql Nmap done: 1 IP address (1 host up) scanned in 0.09 seconds Solution When everything else fails, go GUI! system-config-securitylevel and add port 3306. All done!

    Read the article

  • IMAPSync Migration to Exchange 2010 SP1: Exchange drops connections while checking for existence of folders

    - by Benjamin Priestman
    I'm migrating from ZImbra Collaboration Suite to Exchange 2010 SP1. I'm testing IMAPSync as a possible migration tool and have hit a problem with the IMAP server in Exchange 2010. For each account it migrates, IMAPSync loops through the list of folders in the source mailbox and tests for the existence of each one in the destination mailbox. It then goes on to create those folders that do not exist and copy over the messages. It's the intial testing for the existence of the folders that is giving me a problem. The response given by the Exchange server when the folder does not yet exist is given as an error: "R=""16 NO IMAPSyncTest/8 doesn't exist."" After ten of these errors have been issued in succession, the Exchange server appears to stop responding to the IMAP session. Enabling protocol logging for IMAP confirms that the 10th request for a non-existant folder is the last request to be logged on the server. IMAPSync carries on merrily without seeming to realise its connection has gone and thus fails to create any folders. I've logged this with the tool's creator. Does anyone have any idea why Exchange is stopping responding to the connections though? The behaviour looks rather like throttling, although the 'ten strikes and you're out' trigger does not seem to correspond to any of the triggers on the ThrottlingPolicies. Just to check, I've tried creating a new ThrottlingPolicy, turned everything that I think might be relevant up to 11 and applied it to the my test mailbox. Policy settings are listed below, along with IMAP settings. Everything else should be pretty much as default. Throttling Policy RunspaceId : afa3159c-32a6-4906-986f-8adfbe50868b IsDefault : False AnonymousMaxConcurrency : 1 AnonymousPercentTimeInAD : AnonymousPercentTimeInCAS : AnonymousPercentTimeInMailboxRPC : EASMaxConcurrency : 10 EASPercentTimeInAD : EASPercentTimeInCAS : EASPercentTimeInMailboxRPC : EASMaxDevices : 10 EASMaxDeviceDeletesPerMonth : EWSMaxConcurrency : 10 EWSPercentTimeInAD : 50 EWSPercentTimeInCAS : 90 EWSPercentTimeInMailboxRPC : 60 EWSMaxSubscriptions : 5000 EWSFastSearchTimeoutInSeconds : 60 EWSFindCountLimit : 1000 IMAPMaxConcurrency : 1000 IMAPPercentTimeInAD : 400 IMAPPercentTimeInCAS : 400 IMAPPercentTimeInMailboxRPC : 400 OWAMaxConcurrency : 5 OWAPercentTimeInAD : 30 OWAPercentTimeInCAS : 150 OWAPercentTimeInMailboxRPC : 150 POPMaxConcurrency : 20 POPPercentTimeInAD : POPPercentTimeInCAS : POPPercentTimeInMailboxRPC : PowerShellMaxConcurrency : 18 PowerShellMaxTenantConcurrency : PowerShellMaxCmdlets : PowerShellMaxCmdletsTimePeriod : ExchangeMaxCmdlets : PowerShellMaxCmdletQueueDepth : PowerShellMaxDestructiveCmdlets : PowerShellMaxDestructiveCmdletsTimePeriod : RCAMaxConcurrency : 1000 RCAPercentTimeInAD : 400 RCAPercentTimeInCAS : 400 RCAPercentTimeInMailboxRPC : 400 CPAMaxConcurrency : 20 CPAPercentTimeInCAS : 205 CPAPercentTimeInMailboxRPC : 200 MessageRateLimit : RecipientRateLimit : ForwardeeLimit : CPUStartPercent : 75 AdminDisplayName : ExchangeVersion : 0.10 (14.0.100.0) Name : TestMigrationThrottling DistinguishedName : CN=TestMigrationThrottling,CN=Global Settings,CN=Our Company,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=cimex,DC=com Identity : TestMigrationThrottling Guid : 240049b3-2023-4df1-8edc-fbfc1fc80b87 ObjectCategory : domain.com/Configuration/Schema/ms-Exch-Throttling-Policy ObjectClass : {top, msExchGenericPolicy, msExchThrottlingPolicy} WhenChanged : 21/04/2011 18:48:19 WhenCreated : 21/04/2011 18:07:20 WhenChangedUTC : 21/04/2011 17:48:19 WhenCreatedUTC : 21/04/2011 17:07:20 OrganizationId : OriginatingServer : a-domain-controller IsValid : True IMAPSettings RunspaceId : afa3159c-32a6-4906-986f-8adfbe50868b ProtocolName : IMAP4 Name : 1 MaxCommandSize : 10240 ShowHiddenFoldersEnabled : False UnencryptedOrTLSBindings : {192.168.x.x:143} SSLBindings : {192.168.x.x:993} InternalConnectionSettings : {mail.office.domain.com:143:TLS, mail.office.domain.com:993:SSL} ExternalConnectionSettings : {mail.office.domain.com:143:TLS, mail.office.domain.com:993:SSL} X509CertificateName : mail.domain.com Banner : The Microsoft Exchange IMAP4 service is ready. LoginType : SecureLogin AuthenticatedConnectionTimeout : 00:30:00 PreAuthenticatedConnectionTimeout : 00:01:00 MaxConnections : 2147483647 MaxConnectionFromSingleIP : 2147483647 MaxConnectionsPerUser : 16 MessageRetrievalMimeFormat : BestBodyFormat ProxyTargetPort : 143 CalendarItemRetrievalOption : iCalendar OwaServerUrl : EnableExactRFC822Size : False LiveIdBasicAuthReplacement : False SuppressReadReceipt : False ProtocolLogEnabled : True EnforceCertificateErrors : False LogFileLocation : C:\Program Files\Microsoft\Exchange Server\V14\Logging\Imap4 LogFileRollOverSettings : Daily LogPerFileSizeQuota : 0 B (0 bytes) ExtendedProtectionPolicy : None EnableGSSAPIAndNTLMAuth : True Server : CMX-OFFICE-EX01 AdminDisplayName : ExchangeVersion : 0.10 (14.0.100.0) DistinguishedName : CN=1,CN=IMAP4,CN=Protocols,CN=EXCHANGE01,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=Our COmpany,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=com Identity : EXCHANGE01\1 Guid : 48f9dc37-74c2-4fb0-a042-641f863f45f2 ObjectCategory : domain.com/Configuration/Schema/ms-Exch-Protocol-Cfg-IMAP-Server ObjectClass : {top, protocolCfg, protocolCfgIMAP, protocolCfgIMAPServer} WhenChanged : 21/04/2011 17:03:39 WhenCreated : 15/04/2011 13:51:58 WhenChangedUTC : 21/04/2011 16:03:39 WhenCreatedUTC : 15/04/2011 12:51:58 OrganizationId : OriginatingServer : a-domain-server IsValid : True

    Read the article

  • Exchange Mail Flow

    - by Tuck918
    Hello. I have a question. We have one Exchange 2003 server and two Exchange 2007 servers. Most all of our mailboxes are on 2007 but we do still have one shared mailbox, unity mailbox and a journling mailbox on 2003. Public Folders have been set to replicate to 2007. I have set up a send connector on 2007 with a cost of 1. Receive connectors have Anonymous Users checked on 2007. On 2003 there are two connectors: the Internet Email connector and the connector that connects 2003 to 2007. We have a SPAM filtering device that email goes through before it is handed off to Exchange. The SPAM filtering device is set to send email to one of our Exchange 2007 servers. Here is my question/problem: Even though the SPAM filtering device is set to forward email to Exchange 2007, somehow all of our email is still going through the Exchange 2003 server before it finally hits the users mailboxes on the Exchange 2007 server. How can I change it so that all email goes directly to Exchange 2007 and never routes through Excahnge 2003 both ways, inbound and outbound? Would also like to add: In the EMC under Org- Hub- Send Connector there are two connectors. One is the "Internet Connector" from the 2003 box and the other is the new one I created. THe address space on the 2003 one is set to a cost of 2, no smart hosts and the 2003 box is listed as the Source Server. THe other Send Connector has an address space of 1, no smart host and has the 2 excahnge 2007 servers listed as the source servers. In EMC under Server- Hub- my two exchange 2007 servers are listed. Each one has 2 receive connectors. Both Recieve Connectors are setup the same way. THe Default Receive Connector has Anonymous Users checked. The other Recieve Connector is labled "Client" and I am not sure what it does or why its there. Anonymous Users are not checked. No smart hosts configured on 2003. Additional details Currently we have 3 excahnge servers. One exchange 2003 server and two excahnge 2007 servers. THe exchange 2003 server is the acting "bridgehead" serverand all email is routing through this server, inbound and outbound. We are wanting to decommission this server and use our two exchange 2007 servers as our mailbox servers. All of of user mailboxes are already on one of the exchange 2007 boxes and we want to put whats left on the exchange 2003 box on our other excahnge 2007 box. Both excahnge 2007 servers are currently CAS, HT and MB servers. We have a SPAM filtering device that sits between our excahnge servers and the firewall and have it configured to send messages to one of the excahgne 2007 servers but when we look at the message headers we can see that messgaes are still being routed to the excahnge 2003 box. We want to bypass the exchange 2003 in the routing process as it is dying and is starting to have major issues so everytime it goes down our email is down. Is there possible some sort of AD routing link/site link stuff going on?

    Read the article

  • vconfig created virtual interface and trunking - is the the interface untagged or tagged for that VLAN ID?

    - by kce
    I am trying to setup an additional VLAN on our Debian-based router/firewall (which exists as a virtual machine on Hyper-V), our core switch (an HP Procurve 5406) and a remote HP ProCurve 2610 that is connected via a WAN Transparent Lan Service (TLS) link. Let's work backwards from the network edge: The Debian server has an external connection attached to eth0. The internal interface is eth1, which is connected directly from our Hyper-V host to the 5406. The port that eth1 is attached to is setup as Trk12. The 2610 is attached to Trk9 (which trunks a whole slew of VLANs - Trk9 is our TLS head). I can successfully ping the management IP addresses for my VLAN from both switches but I cannot ping, from either switch, the virtual interface for my new VLAN on the Debian-base router and firewall. The existing VLAN works fine. What gives? The port eth1 is attached to is a trunk, the existing VLAN (ID 98) is untagged on the trunk, the new VLAN (ID 198) is tagged. VLAN 198 is tagged on Trk9 on the 5406 and on the 2610. I can ping the other switch's management IP (10.100.198.2 and 10.100.198.3) from the other respective switch. That leg of the VLAN works - however I cannot communicate with eth1.198's 10.100.198.1. I feel like I'm missing something elementary but what it is remains illusive to me. I suspect the issue is with the vconfig created eth1.198. It should pass the tagged VLAN 198 packets correct? But they cannot seem to get any further than the 5406. Communication on the existing VLAN 98 works fine. From the Debian box: eth1: eth1 Link encap:Ethernet HWaddr 00:15:5d:34:5e:03 inet addr:10.100.0.1 Bcast:10.100.255.255 Mask:255.255.0.0 inet6 addr: fe80::215:5dff:fe34:5e03/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:12179786 errors:0 dropped:0 overruns:0 frame:0 TX packets:20210532 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1586498028 (1.4 GiB) TX bytes:26154226278 (24.3 GiB) Interrupt:9 Base address:0xec00 eth1.198: eth1.198 Link encap:Ethernet HWaddr 00:15:5d:34:5e:03 inet addr:10.100.198.1 Bcast:10.100.198.255 Mask:255.255.255.0 inet6 addr: fe80::215:5dff:fe34:5e03/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1496 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:72 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:3528 (3.4 KiB) # cat /proc/net/vlan/eth1.198: eth1.198 VID: 198 REORDER_HDR: 0 dev->priv_flags: 1 total frames received 0 total bytes received 0 Broadcast/Multicast Rcvd 0 total frames transmitted 72 total bytes transmitted 3528 total headroom inc 0 total encap on xmit 39 Device: eth1 INGRESS priority mappings: 0:0 1:0 2:0 3:0 4:0 5:0 6:0 7:0 EGRESS priority mappings: # ip route 10.100.198.0/24 dev eth1.198 proto kernel scope link src 10.100.198.1 206.174.64.0/20 dev eth0 proto kernel scope link src 206.174.66.14 10.100.0.0/16 dev eth1 proto kernel scope link src 10.100.0.1 default via 206.174.64.1 dev eth0 # iptables -L -v Chain INPUT (policy DROP 6875 packets, 637K bytes) pkts bytes target prot opt in out source destination 41 4320 ACCEPT all -- lo any anywhere anywhere 11481 1560K ACCEPT all -- any any anywhere anywhere state RELATED,ESTABLISHED 107 8058 ACCEPT icmp -- any any anywhere anywhere 0 0 ACCEPT tcp -- eth1 any 10.100.0.0/24 anywhere tcp dpt:ssh 701 317K ACCEPT udp -- eth1 any anywhere anywhere udp dpts:bootps:bootpc Chain FORWARD (policy DROP 1 packets, 40 bytes) pkts bytes target prot opt in out source destination 156K 25M ACCEPT all -- eth1 any anywhere anywhere 215K 248M ACCEPT all -- eth0 eth1 anywhere anywhere state RELATED,ESTABLISHED 0 0 ACCEPT all -- eth1.198 any anywhere anywhere 0 0 ACCEPT all -- eth0 eth1.198 anywhere anywhere state RELATED,ESTABLISHED Chain OUTPUT (policy ACCEPT 13048 packets, 1640K bytes) pkts bytes target prot opt in out source destination From the 5406: # show vlan ports trk12 detail Status and Counters - VLAN Information - for ports Trk12 VLAN ID Name | Status Voice Jumbo Mode ------- -------------------- + ---------- ----- ----- -------- 98 WIFI | Port-based No No Untagged 198 VLAN198 | Port-based No No Tagged

    Read the article

  • Print directly to CUPS server from non-local clients (Ubuntu 14.04)

    - by OEP
    I set up a CUPS server with a few queues and printing from local clients (the CUPS test page and Samba) seems to work just fine. It seems like the CUPS server is denying non-local clients though: 130.127.48.70 - - [03/Jun/2014:14:29:19 -0400] "POST /printers/m137 HTTP/1.1" 200 390 Validate-Job successful-ok 130.127.48.70 - - [03/Jun/2014:14:29:19 -0400] "POST /printers/m137 HTTP/1.1" 200 339 Create-Job client-error-not-authorized localhost - - [03/Jun/2014:14:40:50 -0400] "POST /printers/m137 HTTP/1.1" 200 410869 Print-Job successful-ok This makes me think I have some sort of host-based restriction in my configuration file, but I can't find it. I've even set my default policy to Allow all only to get the same log message. I'm working from a configuration file which had previously worked on an older version of CUPS, which looks quite similar to the example cupsd.conf. I could be wrong but it looks like that final <Limit All> block ought to allow the actions the logs complain about. MaxLogSize 2000000000 # Log general information in error_log - change "info" to "debug" for # troubleshooting... LogLevel info #AccessLog syslog #ErrorLog syslog #PageLog syslog # Administrator user group... SystemGroup sys root lp # Only listen for connections from the local machine. Listen 0.0.0.0:631 Listen :::631 Listen /var/run/cups/cups.sock ServerName <snipped> # Show shared printers on the local network. Browsing Off BrowseOrder allow,deny # (Change '@LOCAL' to 'ALL' if using directed broadcasts from another subnet.) BrowseAllow @LOCAL # Default authentication type, when authentication is required... DefaultAuthType Basic # Restrict access to the server... <Location /> Order allow,deny Allow all </Location> # Restrict access to the admin pages... <Location /admin> AuthType Default Require user @SYSTEM Encryption Required Order allow,deny Allow all </Location> # Restrict access to configuration files... <Location /admin/conf> AuthType Default Require user @SYSTEM Encryption Required Order allow,deny Allow all </Location> # Set the default printer/job policies... <Policy default> # Job-related operations must be done by the owner or an administrator... <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job CUPS-Move-Job> Require user @OWNER @SYSTEM Order deny,allow </Limit> # All administration operations require an administrator to authenticate... <Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default> AuthType Default Require user @SYSTEM Order deny,allow </Limit> # All printer operations require a printer operator to authenticate... <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After CUPS-Accept-Jobs CUPS-Reject-Jobs> AuthType Default Require user @SYSTEM Order deny,allow </Limit> # Only the owner or an administrator can cancel or authenticate a job... <Limit Cancel-Job CUPS-Authenticate-Job> Require user @OWNER @SYSTEM Order deny,allow </Limit> <Limit All> Order allow,deny </Limit> </Policy>

    Read the article

  • Set up two IP addresses with one gateway?

    - by Ahmed
    I would like to ask if it is possible to set up two static IPs from same subnet through one gateway? and How if it is? What I am interested in is described here Routing for multiple uplinks/providers, but in my case I have two IP addresses from one provider, both are on same subnet and off course I have internet access on both. I have two NICs, but I don't mind to go with one if that makes it possible. Any thought is appreciated!

    Read the article

< Previous Page | 96 97 98 99 100 101 102 103 104 105 106 107  | Next Page >