Search Results

Search found 4057 results on 163 pages for 'welcome'.

Page 100/163 | < Previous Page | 96 97 98 99 100 101 102 103 104 105 106 107  | Next Page >

• How to eliminate overscan on Ubuntu HTPC

  - by Norman Ramsey

  I'm using an Ubuntu box with Nvidia graphics card as an HTPC. My HDTV is a Sony Bravia KDS-R50XBR1; this is a rear-projection unit with many inputs. I am using the HDMI input. I'm using the proprietary Nvidia drivers and they recognize the 1080x1920 resolution just fine. The display is a little fuzzy but at 50 inches it's perfect for movies. My problem is that the TV has three overscan settings, and none of them reduces overscan to zero. When I was using dual-screen this was fine, but I'm moving to where the TV is my only screen, and the Gnome panels are not visible because of the overscan. I'd like to figure out how to eliminate the overscan, without trying to scale my 1080p content down to 920p or something ridiculous like that. Ideally there would be some scurvy trick, perhaps involving the TV service menu, to get rid of the overscan on the TV side. Or I could move the Gnome panels, but I still would be missing the edges of my movies. Suggestions most welcome.

  Read the article

• Windows 7 Not Recognizing Camera Nor iPhone as Camera

  - by taudep

  I've been struggling with this one for a few days. I've recently upgraded an older computer to Windows 7 Home Premium. Neither my digital camera (A Canon SD1200IS) nor iPhone are ever detected as cameras, nor ever show up as accessable in Explorer. With the Canon camera, no driver is required. It's supposed to work with the default Windows 7 drivers. However, in the Control Panel's Device Manager, I'm always seeing a yellow icon next to the "Canon Digital Camera" device. I've uninstalled the device and let Windows attempt to reinstall, but it can never find a driver to install. With the iPhone, it's very similar. One big difference, though, is that iTunes can see the iPhone and back it up, etc. However, again when I go to the Device Manager, there's a yellow icon next to the iPhone. I've uninstalled iTunes, reinstalled, rebooted, deleted drivers, and let Window try to reinstall the driver, but it can never find the driver. So there seems to be some correlation that my machine can't detect cameras properly, and that it might be even a lower-level type of driver I'm struggling with. I know that USB however, does work, because I have have an external drive hooked into the machine. I've gone through the web and tried two hours worth of fixes, without success. I feel like if I can get the Canon camera detected, then the iPhone will be on it's way to being fixed too. BTW, I couldn't really find anything of use in the Event viewer. Any and all suggestions welcome.

  Read the article

• Does Windows 8 RTM Support VB6 (SP6) Runtime files? If so, which ones?

  - by user51047

  Basically, I'm trying to find out which of the following files come packaged with the Windows 8 RTM (that is, the final version). Just to be clear, we're not wanting to know if any of the runtime files (listed below) are or were included with any of the previous versions (Beta, CTP, RS etc) or releases of Windows 8 - we are just interested in this compatibility question as far as Windows 8 RTM (Final Version) is concerned. In addition, if possible, we would also like to know which of the below files (if any) come shipped and registered with the Windows 8 RT (on ARM) version. As far as the ARM version is concerned, you're welcome to base your answer on the latest version of Windows 8 RT (on ARM) that is available at the date and time your answer is posted. (This will also serve to future-proof this question as additional releases or versions of Windows 8 and Windows 8 RT on ARM come out). Here are the list of files (which are basically the VB6 SP6 runtime files): File name Version Size Asycfilt.dll 2.40.4275.1 144 KB (147,728 bytes) Comcat.dll 4.71.1460.1 21.7 KB (22,288 bytes) Msvbvm60.dll 6.0.97.82 1.32 MB (1,386,496 bytes) Oleaut32.dll 2.40.4275.1 584 KB (598,288 bytes) Olepro32.dll 5.0.4275.1 160 KB (164,112 bytes) Stdole2.tlb 2.40.4275.1 17.5 KB (17,920 bytes) Of course, the most important file in there is MSVBVM60.DLL, so if you cannot provide details for all files relating to both Windows Releases, then basing the answer on as many of the files possible would also be useful. Thank you for reading and for your anticipated assistance in putting this question/answer on record.

  Read the article

• Nginx Server Block Port 8081 Path to Root Folder

  - by Pamela

  I'm trying to password protect all of port 8081 on my Nginx server. The only thing this port is used for is PhpMyAdmin. When I navigate to https://www.example.com:8081, I successfully get the default Nginx welcome page. However, when I try navigating to the PhpMyAdmin directory, https://www.example.com:8081/phpmyadmin, I get a "404 Not Found" page. Permission for my htpasswd file is set to 644. Here is the code for my server block: server { listen 8081; server_name example.com www.example.com; root /usr/share/phpmyadmin; auth_basic "Restricted Area"; auth_basic_user_file htpasswd; } I have also tried entirely commenting out #root /usr/share/phpmyadmin; However, it doesn't make any difference. Is my problem confined to using the incorrect root path? If so, how can I find the root path for PhpMyAdmin? If it makes any difference, I'm using Ubuntu 14.04.1 LTS with Nginx 1.4.6 and ISPConfig 3.0.5.4p3.

  Read the article

• Acer Aspire one is falling apart on Ubuntu

  - by Narcolapser

  Question: How do I have my netbook detect and install hardware? Info: I have an Acer Aspire One, it came with windows XP and I loaded it with Win7. I decided I wanted to change to Ubuntu so I tried Ubuntu netbook remix, which failed horribly, and so after attempting 3 or so other OS's I ended with Ubuntu Desktop 9.10. Which worked fine for a while, but there were some minor issues so I asked a question about it here and decided to change my OS again. This last weekend I tried mandriva like that guy in my other question suggested, no success. when I had though my netbook lost the ability to use it's touch pad, I didn't think much of it, just thought it must be a driver or something. But When Mandriva failed, and I also while I was at it tried Damn small linux and Debian, which both failed to, I decided to switch back to Ubuntu Desktop(some where in here my keyboard stopped working for one attempt to). But first I gave the netbook remix one more try. it worked this time, with the exception of it didn't have any networking. I thought it was a driver issue again and finished the weekend with ubuntu desktop 9.10 again. But now things get really crazy. it doesn't know it has a wireless card or an ethernet card. It doesn't know my phone is connected trying to provide wireless broadband either. I'm clueless on what could be the problem. And with only a minimal amount of experience with Ubuntu can't navigate the entire interface with only my keyboard(it doesn't detect a USB mouse when I plug it in, it had when I installed it. in fact the network interfaces were working just fine when I live boot ubuntu to installed it). Even so, I don't know where to go or what to do to make it recognize it's hardware. I'm in a dire situation, any help is welcome.

  Read the article

• Windows 7: Image thumbnails fail to appear

  - by Fopedush

  All right, I've got a pretty strange one here. Since I installed Windows 7 on this machine some time ago, image thumbnails have never worked properly. For the vast majority of images, they completely fail to show up, showing the icon of the default image viewing application instead. Please note that the “Always show icons, never thumbnails” option in folder options is not checked. I've taken a screenshot demonstrating the problem, here: Sometimes, a few image thumbnails will show up correctly, maybe about one in ten, with the rest failing as well. Another screenshot, with a handful of thumbnails visible, can be seen here: Windows explorer does not appear to make any effort to populate the missing thumbnails, and there is no appreciable CPU usage. I can leave a window with missing thumbnails open all night and they will still never appear. Newly created images never generate thumbnails, only images that have been on the system since day one will occasionally show them. This leads me to believe that explorer is set to show thumbnails, but whatever process is supposed to be in charge of actually generating them has failed somehow. In previous versions of windows, explorer.exe itself was responsible for thumbnail generation – has this changed? Any suggestions at all – even if you aren't sure that they will work – are welcome. I'd hate to have to wipe and reinstall on this machine for such a minor annoyance.

  Read the article

• Dell Inspiron 1564 overheating but fan not switching on, how to diagnose?

  - by Smugrik

  I've got a Dell Inspiron 1564 laptop that is about one and a half years old. Since about a week, the laptop started to overheat, causing it to switch off unexpectedly... The cpu fan is working erratically, it can start to spin for a while, doing its job and cooling down the cpu before it stops, but then the temperature goes up, and the fan doesn't reacts, once the temperature reaches a critical point (over 85 celsius, checked with speedfan...), the laptop switches off... I already cleaned the vents and fan from dust, to no avail, and it was actually quite clean anyway. Drivers and bios are up-to-date, no crapware was ever installed on this machine. I don't know how to diagnose the problem, could it be the temperature sensors that sends wrong information, so the fan doesn't reacts? but then I believe the computer wouldn't detect the overheat and stop... Is there a way I can pin point the problem? Maybe some low-level diagnostic tools to check functionality of sensors and fans??? The warranty is already over so any suggestion would be welcome. Thanks!!

  Read the article

• Thunderbird: how to move mails into correct thread? (mailing lists)

  - by unor

  I'm subscribed to some mailing lists and every day people reply to a wrong mail (or they don't reply at all), so that their mail lands in the wrong (or a new) thread. I set the mail display in "View ? Sort by" to "Threaded". Example: mailing list "Foobar": [Foobar] random topic Re: [Foobar] random topic Re: [Foobar] random topic Re: [Foobar] random topic Re: [Foobar] random topic [Foobar] I'm John Doe Re: [Foobar] I'm John Doe Re: [Foobar] Welcome, John Re: [Foobar] random topic There are two discussions, one about "random topic", one about "John Doe". The subject line changes in the discussion about John Doe, which is fine (no problem here). But the last mail should be pigeonholed in the first thread. Instead it is at the top-level. Now, how can I move that last mail into the correct thread? I tried to drag&drop it at the mail I think it should be a reply to, but this doesn't work. I think theoretically it should be possible by fiddling with the mail headers after receiving the mail, but this doesn't seem to be a comfortable way.

  Read the article

• Apache (Solaris 10): 2 symlinks to the same file, one works the other doesn't

  - by justcatchingrye

  I'm seeing a strange issue with Apache I have a system that pulls a configuration file from a web server. I want to use a symlink with the name 'ocds-dpsarch01a.rules'. This doesn't work. However, if I change one character in that name and link it to the same file, it works - See below I can't think of any reason why one symlink would work when another doesn't? I would have thought either the Apache configuration is right and all symlinks work, or it isn't and no syslinks work(?) Any thoughts welcome ls -l /REMOVED/apache2/htdocs/rules/syslog/*cds-dpsarch01a.rules lrwxrwxrwx 1 root root 62 May 13 13:55 ocds-dpsarch01a.rules - /REMOVED/apache2/htdocs/templates/syslog/DCM_SST_DPST_01.rules lrwxrwxrwx 1 root root 62 May 13 13:52 xcds-dpsarch01a.rules - /REMOVED/apache2/htdocs/templates/syslog/DCM_SST_DPST_01.rules 1) Application starting and successfully reading configuration from the web server 13/05/2010 13:56:37: Information: Connecting ... 13/05/2010 13:56:37: Debug: Reading REMOVED:// REMOVED /rules/syslog/xcds-dpsarch01a.rules 13/05/2010 13:56:37: Debug: HTTP response: HTTP/1.1 200 OK Date: Thu, 13 May 2010 13:56:34 GMT Server: Apache Last-Modified: Fri, 09 Apr 2010 12:28:26 GMT ETag: "5073-a744-ee92ae80" Accept-Ranges: bytes Content-Length: 42820 Cache-Control: max-age=5 Expires: Thu, 13 May 2010 13:56:39 GMT NL7C-Filtered: Content-Type: text/plain Connection: close 13/05/2010 13:56:37: Debug: Plain text rules file detected. 2) Application starting and failing to read configuration from the web server 13/05/2010 13:56:55: Information: Connecting ... 13/05/2010 13:56:55: Debug: Reading REMOVED :// REMOVED /rules/syslog/ocds-dpsarch01a.rules 13/05/2010 13:56:55: Debug: HTTP response: HTTP/1.1 403 Forbidden Date: Wed, 12 May 2010 15:25:11 GMT Server: Apache Vary: accept-language,accept-charset Accept-Ranges: bytes Connection: close Content-Type: text/html; charset=iso-8859-1 Content-Language: en Expires: Wed, 12 May 2010 15:25:11 GMT 13/05/2010 13:56:55: Error: HTTP: HTTP/1.1 403 Forbidden Date: Wed, 12 May 2010 15:25:11 GMT Server: Apache Vary: accept-language,accept-charset Accept-Ranges: bytes Connection: close Content-Type: text/html; charset=iso-8859-1 Content-Language: en Expires: Wed, 12 May 2010 15:25:11 GMT 13/05/2010 13:56:55: Error: HTTP GET failed 13/05/2010 13:56:55: Error: Failed to open Rules file: REMOVED :// REMOVED /rules/syslog/ocds-dpsarch01a.rules

  Read the article

• Setting up a purely Node.js http server on port 80

  - by Luke Burns

  I'm using a fresh install of Centos 5.5. I have Node installed and working (I'm just using Node -- no apache, or nginx.), but I cannot figure out how to make a simple server on port 80. Node is running and is listening to port 80. I'm just using the demo app: var http = require('http'); http.createServer(function (req, res) { res.writeHead(200, {'Content-Type': 'text/plain'}); res.end('Hello World\n'); }).listen(80, "x.x.x.x"); console.log('Server listening to port 80.'); When I visit my IP, it does not work. I obtained my ipaddress using ifconfig. I've tried different ports. So there must be something I am missing. What do I need to configure on my server to make this work? I would like to do this without installing apache or nginx. Luke Edit-- Ok so, I installed nginx and started it up, to see whether or not it is related to node, and I don't see its welcome page. So it definitely has something to do with the server. Am I retrieving the IP Address correctly by running: ifconfig then reading the inet addr under eth0?

  Read the article

• NATing IPv4 while routing IPv6

  - by Hugo

  I've the following setup: client(s) <---> (eth0) router (eth1) <---> wan I have a static IPv4 address and a /48 IPv6 address block. I need to connect all the clients to (wan). Each client will have it's own public IPv6. Meanwhile, I need to NAT those same clients over to (wan). Everything IPv4-related and the NAT are working fine. The IPv6 communication to/from (eth0)<-(clients) works fine, as does the IPv6 communication from (eth1)<-(wan) works fine. To provide IPv6 to all my clients, I've thought of too choices: Having the router as a gateway, which different IP on each interface. This sounds like I need to tell my ISP to route the entire block through that single IP, so it's not really an option. Transparently pass IPv6 packets to/from eth0<-eth1, so all clients can communicate with the upstream gateway (I would actually have a switch here if it weren't for the need to remain IPv4 compatible). So, since I've opted for the second choice, I'm in doubt: How can I pass all IPv6 traffic from eth0 to eth1 transparently? What I need is a level 3 bridge, but linux's bridgeutils create a level 2 bridge (which would bridge ipv4 as well, and I can't have that). This is a DD-WRT device, but it's pretty much an embeded linux, so most suggestions that would work on linux are welcome. Thanks.

  Read the article

• 403 Forbidden when Deploying asp.net 4.0 site to IIS 7

  - by Jordan

  So I have an EC2 instance running, the URL NoWeatherSurprises.com I have the DNS pointing there, and I set up a new site in IIS 7 and pointed it to a folder. I used Visual Studios Web Developer 2010 express to publish to this folder. It now has the binaries and such. However if I go to NoWeatherSurprises.com I get the welcome to IIS 7 screen. I'd expect to go to my application If I navigate to http://noweathersurprises.com/weather/ [weather was the folder I published to under wwwroot] I get a 403 forbidden. I have no idea why, I am guessing that it is trying to do a directory listing or something instead of launching my MVC Application. So 2 problems in summary. It is not pointing the domain to the folder directly and I need to add /weather I am getting a 403 forbidden instead of the results of my home controller with the index action. I am new to IIS 7, I had been using IIS 6 and had a lot less trouble setting it up, but I suspect that's my own fault and i am just missing something. Thanks in advance for any help

  Read the article

• Best CPUs for speeding up compiling times of C++ w/ DistGCC

  - by Jay

  I'm putting together a distributed build farm with DistGCC to speed up our teams compile times and just looking for thoughts on which processors to use in the hosts. Are we going to get a noticeable decrease in time using 8 cores vs. 4-hyperthreaded cores? Big difference in time between i7 and Xeon? etc, etc. Just need advice from people who've put together kick-a build clusters. We've got a majority of the normal things to speed up builds in place (pre-compiled headers, ccache, local gigabit connections between them, tons of ram, etc) so please just give advice on the best processor to use. And money is a factor, but anythings doable if the performance increase is noticeable. Thanks. Jay EDIT: Although any advice IS welcome, please refrain from "Do this first" posts as we're not planning on skimping on things like SSD, maxed out RAM, etc. My personal system is a iMac Quad-core i5 with 8GB of RAM. When I build our project locally, my processor floats around 99-100% a majority of the time, which makes me assume it is a bottleneck, even if you made everything else faster. My ram on the other hand doesn't even get close to maxing out. It's also worth noting that I did research this, however every discussion I could find was primarily for gaming machines, which is obviously a different beast in usage. These machines won't even have monitors or anything but integrated graphics since they have one purpose: Build freakin fast. (hopefully)

  Read the article

• Vista failing to load after apparently being repaired

  - by Joomaz

  Hi, I apologise if I'm a litre vague and can give more info if needed. My vista machine has been working fine until today when I tried booting it. Vista loads showing the loading bar then goes to a black screen with the cursor on which you can move. It then remains like this for several minutes, during this time the computer doesn't sound like it's doing much, it is relatively quiet. Finally the welcome screen appears. It stays on this for several minutes again and the computer reboots. This keeps happening and the machine fails to load in safe mode - the same happens. I booted the pc with the vista disk in and ran repair your computer and used the system repair. It took about 20 minutes saying it was repairing damaged giles. I booted the pc again and the same happened. I loaded the pc with yeh vista disk again and chose repair my computer again. System repair seemed to run automatically this time and agian it did the same. I rebooted and the problem persisted. I then tried system restore to a few days ago. After half a hour as it finished it said it failed due to a portion being corrupt. I am really not sure what to do now. Any advice appreciated!

  Read the article

• Best CPUs for speeding up compiling times of C++ w/ DistGCC

  - by Jay

  I'm putting together a distributed build farm with DistGCC to speed up our teams compile times and just looking for thoughts on which processors to use in the hosts. Are we going to get a noticeable decrease in time using 8 cores vs. 4-hyperthreaded cores? Big difference in time between i7 and Xeon? etc, etc. Just need advice from people who've put together kick-a build clusters. We've got a majority of the normal things to speed up builds in place (pre-compiled headers, ccache, local gigabit connections between them, tons of ram, etc) so please just give advice on the best processor to use. And money is a factor, but anythings doable if the performance increase is noticeable. Thanks. Jay EDIT: Although any advice IS welcome, please refrain from "Do this first" posts as we're not planning on skimping on things like SSD, maxed out RAM, etc. My personal system is a iMac Quad-core i5 with 8GB of RAM. When I build our project locally, my processor floats around 99-100% a majority of the time, which makes me assume it is a bottleneck, even if you made everything else faster. My ram on the other hand doesn't even get close to maxing out. It's also worth noting that I did research this, however every discussion I could find was primarily for gaming machines, which is obviously a different beast in usage. These machines won't even have monitors or anything but integrated graphics since they have one purpose: Build freakin fast. (hopefully)

  Read the article

• Best CPUs for speeding up compiling times of C++ w/ DistGCC

  - by Jay

  I'm putting together a distributed build farm with DistGCC to speed up our teams compile times and just looking for thoughts on which processors to use in the hosts. Are we going to get a noticeable decrease in time using 8 cores vs. 4-hyperthreaded cores? Big difference in time between i7 and Xeon? etc, etc. Just need advice from people who've put together kick-a build clusters. We've got a majority of the normal things to speed up builds in place (pre-compiled headers, ccache, local gigabit connections between them, tons of ram, etc) so please just give advice on the best processor to use. And money is a factor, but anythings doable if the performance increase is noticeable. Thanks. Jay EDIT: Although any advice IS welcome, please refrain from "Do this first" posts as we're not planning on skimping on things like SSD, maxed out RAM, etc. My personal system is a iMac Quad-core i5 with 8GB of RAM. When I build our project locally, my processor floats around 99-100% a majority of the time, which makes me assume it is a bottleneck, even if you made everything else faster. My ram on the other hand doesn't even get close to maxing out. It's also worth noting that I did research this, however every discussion I could find was primarily for gaming machines, which is obviously a different beast in usage. These machines won't even have monitors or anything but integrated graphics since they have one purpose: Build freakin fast. (hopefully)

  Read the article

• How to connect to a computer that is in Sleep mode over the internet

  - by Gerhard Weiss

  How to connect to a computer that is in Sleep mode over the internet? I am using LogMeIn to connect to another computer offsite. I just installed Windows 7 RC on that system and found that the Sleep mode actually works. Currently LogMeIn does not connect when the system is in Sleep mode or Hibernate mode (that is what their error message displays when you try). Is there a way to get LogMeIn to connect to a system in Sleep mode? Is there other software that gives simliar LogMeIn functionallity (like RDP, etc.) that could be used on Windows 7 instead. I just use LMI for connecting and nothing else (no printing or file transfers). A Non-expensive options (such as free) would be better. I have seen web sites mentioning "Wake on LAN". Does anyone have some good links on how to set this up to be accessed over the internet? Edited: It looks like LogMeIn BETA might be the solution. https://beta.logmein.com/welcome/nextgen/ Has anyone tried this beta yet?

  Read the article

• Networking DOS within Windows 7 XP Mode, with a Windows XP/7 Networked Share

  - by theonlylos

  For awhile now, one of my clients has been stuck with Corel Paradox 4.0 (it used to be the biggest database system in the DOS days, until Microsoft released Access in the early 90's) so for awhile I've managed to keep it on life support on Windows XP for a few years, however since switching to Windows 7 x64, I've had to resort to using XP Mode as the sandbox to keep it up and running. While I am able to run Paradox as usual in XP Mode, I'm having a serious issue where if I try connecting the install to the network share (which is located on the Windows 7 portion of the system), Paradox keeps exiting because it says the serial number is invalid. Now, I know for a fact that this is an issue with the virtual loopback adapter and also having the VM linked to the physical ethernet adapter -- and while I have solved this issue before, most of my fixes have been bandages since after a few weeks the issue pops up again. Long story short, I wanted to ask if there is a permanent way to link a DOS program to a network share address. For example, when I try doing \tsclient\paradox (the Windows 7 Address) I keep getting an error saying I need a valid network address. I've tried mapping that folder to various drive letters such as P:\Paradox -- but for some reason that keeps failing over time. For what it's worth, Paradox uses a .SOM file to store the network settings, however it isn't editable in Notepad but rather it's controlled by a wizard in Paradox. But if that extension rings any bells, I'd welcome any insights.

  Read the article

• nginx rewrite regex for API versioning

  - by MSpreij

  What I want is for the first to be turned into the second.. /widget => /widget/index.php /widget/ => /widget/index.php /widget?act=list => /widget/index.php?act=list /widget/?act=list => /widget/index.php?act=list /widget/list => /widget/index.php?act=list /widget/v2?act=list => /widget/v2.php?act=list /widget/v2/?act=list => /widget/v2.php?act=list /widget/v2/list => /widget/v2.php?act=list v2 could also be v45, basically "v\d+" act, "list" in this case, can have many values and more will be added. Any additional query parameters would just be passed on with $args, I guess. Basically URLs not specifying the version will go to index.php, which can then decide what specific version file to include. What I am afraid of happening is loops - this should sit in location /widget { right?. (As for putting the version of the API in the URL, I'm not trying to be RESTful, and target audience is small) Resources on how to do this entirely in index.php using "routers" also welcome :-/

  Read the article

• Running Jackd on Ubuntu for my External Firewire Sound card

  - by Asaf

  Hello, I'm running Ubuntu 10.04 and I have an external Sound card: Phonic Firefly 302. I've connected the device, installed Jackd, added the lines: @audio - rtprio 99 @audio - memlock 500000 @audio - nice -10 to /etc/security/limits.conf logged out, logged back in, ran qjackctl (sudo qjackctl to be exact), ran the settings and chose "firewire" on the driver option, pressed "Start" and that was the output: 20:10:19.450 Patchbay deactivated. 20:10:19.578 Statistics reset. 20:10:19.601 ALSA connection graph change. 20:10:19.828 ALSA connection change. 20:10:21.293 Startup script... 20:10:21.293 artsshell -q terminate sh: artsshell: not found 20:10:21.695 Startup script terminated with exit status=32512. 20:10:21.695 JACK is starting... 20:10:21.695 /usr/bin/jackd -dfirewire -r44100 -p1024 -n3 jackd 0.118.0 Copyright 2001-2009 Paul Davis, Stephane Letz, Jack O'Quinn, Torben Hohn and others. jackd comes with ABSOLUTELY NO WARRANTY This is free software, and you are welcome to redistribute it under certain conditions; see the file COPYING for details 20:10:21.704 JACK was started with PID=22176. no message buffer overruns JACK compiled with System V SHM support. loading driver .. libffado 2.0.0 built Mar 31 2010 14:47:42 firewire ERR: Error creating FFADO streaming device cannot load driver module firewire no message buffer overruns 20:10:21.819 JACK was stopped successfully. 20:10:21.819 Post-shutdown script... 20:10:21.822 killall jackd jackd: no process found 20:10:22.230 Post-shutdown script terminated with exit status=256. 20:10:23.865 Could not connect to JACK server as client. - Overall operation failed. - Unable to connect to server. Please check the messages window for more info. Error: "/tmp/kde-asaf" is owned by uid 1000 instead of uid 0.

  Read the article

• USB device goes to "Unknown device" randomly

  - by ILovePaperTowels

  We have a kiosk that uses a bio scanner from m2sys (usb device). It scans your palm to recognize you. Every so often, maybe 1-3 times a day, the bio scanner will become an unknown device. We are unable to see any patterns or commonalities. When we unplug and plug it back in, it becomes available again. We have custom software that uses the bio scanner's software to communicate with it. We've added a crap load of logging on everything but there doesn't seem to be any pattern of when the thing shuts off. We have these devices deployed to multiple locations (100+) and they are all seeing the issues but we can not reproduce it here, at the main office. I've evaluated the software and I don't see anything. I'm thinking it's a driver or hardware issue (but we can't reproduce the issues here in the main office) or maybe environmental interference of some sort like from scan guns, automatic doors, microwaves or something else. Any ideas would be welcome. I'm looking for possible causes of the usb device becoming unknown or ways to figure out what the cause is. no other usb devices have this issue, only the scanner We've contacted the manufacturer and they blame our software We're getting help from Microsoft, but they haven't found anything OS is embedded XP http://www.m2sys.com/palm-vein-reader.htm

  Read the article

• RemoteApp .rdp embed creds?

  - by Chris_K

  Windows 2008 R2 server running Remote Desktop Services (what we used to call Terminal Services back in the olden days). This server is the entry point into a hosted application -- you could call it Software as a Service I suppose. We have 3rd party clients connecting to use it. Using RemoteApp Manager to build RemoteApp .rdp shortcuts to distribute to client workstations. These workstations are not in the same domain as the RDS server. There is no trust relationship between domains (nor will there be). There is a tightly controlled site to site VPN between workstations and the RDS server, we're quite confident we have access to the server locked down. The remoteApp being run is an ERP application with its own authentication scheme. The issue? I'm trying to avoid the need to create AD logins for every end user when connecting to the RemoteApp server. In fact, since we're doing a remoteApp and they have to authenticate to that app, I'd rather just not prompt them at all for AD creds. I certainly don't want them caught up in managing AD passwords (and periodic expirations) for accounts they only use to get to their ERP login. However, I can't figure out how to embed AD creds in a RemoteApp .rdp file. I don't really want to turn off all authentication on the RDS server at that level. Any good options? My goal is to make this as seamless as possible for the end-users. Clarifying questions are welcome.

  Read the article

• Trying to Set Up SSH Tunneling To MySQL Server for MySQL Query Browser

  - by Teno

  I'm trying to set up SSH tunneling on a remote web server to another MySQL server so that the database can be browsed easily with MySQL Query Browser. I'm following this page but cannot connect to the MySQL server. http://www.howtogeek.com/howto/ubuntu/access-your-mysql-server-remotely-over-ssh/ What I've done: logged in to the web server with Putty via SSH. typed ssh -L 33060:[database]:3306 [myusername]@[webserver_address] where [...]s are altered by the actual information. I was asked a password and typed it and got the following message. So it seems login was successful. socket: Protocol not supported Last login: .... 2012 from .... Copyright (c) 1980, 1983, 1986, 1988, 1990, 1991, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 7.1-RELEASE.... Welcome to FreeBSD! Opened MySQL Query Browser in Windows and entered Server Host: localhost Port: 33060 UserName: myusername PassWord: mypassword And it says, Could not connect to the specified instance. MySQL Error Number 2003 Can't connect to MySQL Server on 'localhost' (10061) Sorry if this is too basic. Thanks for your information.

  Read the article

• Archive software for big files and fast index

  - by AkiRoss

  I'm currently using tar for archiving some files. Problem is: archives are pretty big, contains many data and tar is very slow when listing and extracting. I often need to extract single files or folders from the archive, but I don't currently have an external index of files. So, is there an alternative for Linux, allowing me to build uncompressed archive files, preserving the file attributes AND having fast access list table? I'm talking about archives of 10 to 100 GB, and it's pretty impractical to wait several minutes to access a single file. Anyway, any trick to solve this problem is welcome (but single archives are non-optional, so no rsync or similar). Thanks in advance! EDIT: I'm not compressing archives, and using tar I think they are too slow. To be precise about "slow", I'd like that: listing archive content should take time linear in files count inside the archive, but with very little constant (e.g. if a list of all the files is included at the head of the archive, it could be very fast). extraction of a target file/directory should (filesystem premitting) take time linear with the target size (e.g. if I'm extracting a 2MB PDF file in a 40GB directory, I'd really like it to take less than few minutes... If not seconds). Of course, this is just my idea and not a requirement. I guess such performances could be achievable if the archive contained an index of all the files with respective offset and such index is well organized (e.g. tree structure).

  Read the article

• IE 8 crashes when opening an html file from an autorun CD

  - by dave4351

  On Windows 7, when I insert a CD with a very simple HTML page referenced in the autorun.inf file, Internet Explorer 8 opens and then immediately crashes, with the error message "Internet Explorer has stopped working" and then checks for a solution. Then it says "A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." On Windows Vista, IE 8 just opens and then closes silently, with no error messages or help of any kind. I have since discovered this is due to IE 8's "protected mode" and turning this off fixes the issue so that the HTML file on the CD launches normally. What I'd like to know: is there any way to get around this, so that I can launch a simple HTML file in the user's default browser, using an autorun.inf file on a CD, without first having my users open IE 8 and turn off protected mode? Perhaps the most bizarre thing is that if IE is already open when you insert the CD, the HTML page just opens--no crash. It only crashes if IE 8 happens to be closed when you insert the CD. And so a possible workaround may be to get the default browser to launch and then open the HTML file. All suggestions welcome.

  Read the article

< Previous Page | 96 97 98 99 100 101 102 103 104 105 106 107  | Next Page >