Search Results

Search found 9796 results on 392 pages for 'arrange items'.

Page 101/392 | < Previous Page | 97 98 99 100 101 102 103 104 105 106 107 108  | Next Page >

  • PASS: The Budget Process

    - by Bill Graziano
    Every fiscal year PASS creates a detailed budget.  This helps us set priorities and communicate to our members what we’re going to do in the upcoming year.  You can review the current budget on the PASS Governance page.  That page currently requires you to login but I’m talking with HQ to see if there are any legal issues with opening that up. The Accounting Team The PASS accounting team is two people.  The Executive Vice-President of Finance (“EVP”) and the PASS Accounting Manager.  Sandy Cherry is the accounting manager and works at PASS HQ.  Sandy has been with PASS since we switched management companies in 2007.  Throughout this document when I talk about any actual work related to the budget that’s all Sandy :)  She’s the glue that gets us through this process.  Last year we went through 32 iterations of the budget before the Board approved so it’s a pretty busy time for her us – well, mostly her. Fiscal Year The PASS fiscal year runs from July 1st through June 30th the following year.  Right now we’re in fiscal year 2011.  Our 2010 Summit actually occurred in FY2011.  We switched to this schedule from a calendar year in 2006.  Our goal was to have the Summit occur early in our fiscal year.  That gives us the rest of the year to handle any significant financial impact from the Summit.  If registrations are down we can reduce spending.  If registrations are up we can decide how much to increase our reserves and how much to spend.  Keep in mind that the Summit is budgeted to generate 82% of our revenue this year.  How it performs has a significant impact on our financials.  The other benefit of this fiscal year is that it matches the Microsoft fiscal year.  We sign an annual sponsorship agreement with Microsoft and it’s very helpful that our fiscal years match. This year our budget process will probably start in earnest in March or April.  I’d like to be done in early June so we can publish before July 1st.  I was late publishing it this year and I’m trying not to repeat that. Our Budget Our actual budget is an Excel spreadsheet with 36 sheets.  We remove some of those when we publish it since they include salary information.  The budget is broken up into various portfolios or departments.  We have 20 portfolios.  They include chapters, marketing, virtual chapters, marketing, etc.  Ideally each portfolio is assigned to a Board member.  Each portfolio also typically has a staff person assigned to it.  Portfolios that aren’t assigned to a Board member are monitored by HQ and the ExecVP-Finance (me).  These are typically smaller portfolios such as deferred membership or Summit futures.  (More on those in a later post.)  All portfolios are reviewed by all Board members during the budget approval process, when interim financials are released internally and at year-end. The Process Our first step is to budget revenues.  The Board determines a target attendee number.  We have formulas based on historical performance that convert that to an overall attendee revenue number.  Other revenue projections (such as vendor sponsorships) come from different parts of the organization.  I hope to have another post with more details on how we project revenues. The next step is to budget expenses.  Board members fill out a sample spreadsheet with their budget for the year.  They can add line items and notes describing what the amounts are for.  Each Board portfolio typically has from 10 to 30 line items.  Any new initiatives they want to pursue needs to be budgeted.  The Summit operations budget is managed by HQ.  It includes the cost for food, electrical, internet, etc.  Most of these come from our estimate of attendees and our contract with the convention center.  During this process the Board can ask for more or less to be spent on various line items.  For example, if we weren’t happy with the Internet at the last Summit we can ask them to look into different options and/or increasing the budget.  HQ will also make adjustments to these numbers based on what they see at the events and the feedback we receive on the surveys. After we have all the initial estimates we start reviewing the entire budget.  It is sent out to the Board and we can see what each portfolio requested and what the overall profit and loss number is.  We usually start with too much in expenses and need to cut.  In years past the Board started haggling over these numbers as a group.  This past year they decided I should take a first cut and present them with a reasonable budget and a list of what I changed.  That worked well and I think we’ll continue to do that in the future. We go through a number of iterations on the budget.  If I remember correctly, we went through 32 iterations before we passed the budget.  At each iteration various revenue and expense numbers can change.  Keep in mind that the PASS budget has 200+ line items spread over 20 portfolios.  Many of these depend on other numbers.  For example, if we decide increase the projected attendees that cascades through our budget.  At each iteration we list what changed and the impact.  Ideally these discussions will take place at a face-to-face Board meeting.  Many of them also take place over the phone.  Board members explain any increase they are asking for while performing due diligence on other budget requests.  Eventually a budget emerges and is passed. Publishing After the budget is passed we create a version without the formulas and salaries for posting on the web site.  Sandy also creates some charts to help our members understand the budget.  The EVP writes a nice little letter describing some of the changes from last year’s budget.  You can see my letter and our budget on the PASS Governance page. And then, eight months later, we start all over again.

    Read the article

  • Partner Blog Series: PwC Perspectives Part 2 - Jumpstarting your IAM program with R2

    - by Tanu Sood
    Identity and access management (IAM) isn’t a new concept. Over the past decade, companies have begun to address identity management through a variety of solutions that have primarily focused on provisioning. . The new age workforce is converging at a rapid pace with ever increasing demand to use diverse portfolio of applications and systems to interact and interface with their peers in the industry and customers alike. Oracle has taken a significant leap with their release of Identity and Access Management 11gR2 towards enabling this global workforce to conduct their business in a secure, efficient and effective manner. As companies deal with IAM business drivers, it becomes immediately apparent that holistic, rather than piecemeal, approaches better address their needs. When planning an enterprise-wide IAM solution, the first step is to create a common framework that serves as the foundation on which to build the cost, compliance and business process efficiencies. As a leading industry practice, IAM should be established on a foundation of accurate data for identity management, making this data available in a uniform manner to downstream applications and processes. Mature organizations are looking beyond IAM’s basic benefits to harness more advanced capabilities in user lifecycle management. For any organization looking to embark on an IAM initiative, consider the following use cases in managing and administering user access. Expanding the Enterprise Provisioning Footprint Almost all organizations have some helpdesk resources tied up in handling access requests from users, a distraction from their core job of handling problem tickets. This dependency has mushroomed from the traditional acceptance of provisioning solutions integrating and addressing only a portion of applications in the heterogeneous landscape Oracle Identity Manager (OIM) 11gR2 solves this problem by offering integration with third party ticketing systems as “disconnected applications”. It allows for the existing business processes to be seamlessly integrated into the system and tracked throughout its lifecycle. With minimal effort and analysis, an organization can begin integrating OIM with groups or applications that are involved with manually intensive access provisioning and de-provisioning activities. This aspect of OIM allows organizations to on-board applications and associated business processes quickly using out of box templates and frameworks. This is especially important for organizations looking to fold in users and resources from mergers and acquisitions. Simplifying Access Requests Organizations looking to implement access request solutions often find it challenging to get their users to accept and adopt the new processes.. So, how do we improve the user experience, make it intuitive and personalized and yet simplify the user access process? With R2, OIM helps organizations alleviate the challenge by placing the most used functionality front and centre in the new user request interface. Roles, application accounts, and entitlements can all be found in the same interface as catalog items, giving business users a single location to go to whenever they need to initiate, approve or track a request. Furthermore, if a particular item is not relevant to a user’s job function or area inside the organization, it can be hidden so as to not overwhelm or confuse the user with superfluous options. The ability to customize the user interface to suit your needs helps in exercising the business rules effectively and avoiding access proliferation within the organization. Saving Time with Templates A typical use case that is most beneficial to business users is flexibility to place, edit, and withdraw requests based on changing circumstances and business needs. With OIM R2, multiple catalog items can now be added and removed from the shopping cart, an ecommerce paradigm that many users are already familiar with. This feature can be especially useful when setting up a large number of new employees or granting existing department or group access to a newly integrated application. Additionally, users can create their own shopping cart templates in order to complete subsequent requests more quickly. This feature saves the user from having to search for and select items all over again if a request is similar to a previous one. Advanced Delegated Administration A key feature of any provisioning solution should be to empower each business unit in managing their own access requests. By bringing administration closer to the user, you improve user productivity, enable efficiency and alleviate the administration overhead. To do so requires a federated services model so that the business units capable of shouldering the onus of user life cycle management of their business users can be enabled to do so. OIM 11gR2 offers advanced administrative options for creating, managing and controlling business logic and workflows through easy to use administrative interface and tools that can be exposed to delegated business administrators. For example, these business administrators can establish or modify how certain requests and operations should be handled within their business unit based on a number of attributes ranging from the type of request or the risk level of the individual items requested. Closed-Loop Remediation Security continues to be a major concern for most organizations. Identity management solutions bolster security by ensuring only the right users have the right access to the right resources. To prevent unauthorized access and where it already exists, the ability to detect and remediate it, are key requirements of an enterprise-grade proven solution. But the challenge with most solutions today is that some of this information still exists in silos. And when changes are made to systems directly, not all information is captured. With R2, oracle is offering a comprehensive Identity Governance solution that our customer organizations are leveraging for closed loop remediation that allows for an automated way for administrators to revoke unauthorized access. The change is automatically captured and the action noted for continued management. Conclusion While implementing provisioning solutions, it is important to keep the near term and the long term goals in mind. The provisioning solution should always be a part of a larger security and identity management program but with the ability to seamlessly integrate not only with the company’s infrastructure but also have the ability to leverage the information, business models compiled and used by the other identity management solutions. This allows organizations to reduce the cost of ownership, close security gaps and leverage the existing infrastructure. And having done so a multiple clients’ sites, this is the approach we recommend. In our next post, we will take a journey through our experiences of advising clients looking to upgrade to R2 from a previous version or migrating from a different solution. Meet the Writers:   Praveen Krishna is a Manager in the Advisory Security practice within PwC.  Over the last decade Praveen has helped clients plan, architect and implement Oracle identity solutions across diverse industries.  His experience includes delivering security across diverse topics like network, infrastructure, application and data where he brings a holistic point of view to problem solving. Dharma Padala is a Director in the Advisory Security practice within PwC.  He has been implementing medium to large scale Identity Management solutions across multiple industries including utility, health care, entertainment, retail and financial sectors.   Dharma has 14 years of experience in delivering IT solutions out of which he has been implementing Identity Management solutions for the past 8 years. Scott MacDonald is a Director in the Advisory Security practice within PwC.  He has consulted for several clients across multiple industries including financial services, health care, automotive and retail.   Scott has 10 years of experience in delivering Identity Management solutions. John Misczak is a member of the Advisory Security practice within PwC.  He has experience implementing multiple Identity and Access Management solutions, specializing in Oracle Identity Manager and Business Process Engineering Language (BPEL). Jenny (Xiao) Zhang is a member of the Advisory Security practice within PwC.  She has consulted across multiple industries including financial services, entertainment and retail. Jenny has three years of experience in delivering IT solutions out of which she has been implementing Identity Management solutions for the past one and a half years.

    Read the article

  • Why isn't this file reading/writing program working?

    - by user320950
    This program is supposed to read files and write them. I took the file open checks out because they kept causing errors. The problem is that the files open like they are supposed to and the names are correct but nothing is on any of the text screens. Do you know what is wrong? #include<iostream> #include<fstream> #include<cstdlib> #include<iomanip> using namespace std; int main() { ifstream in_stream; // reads itemlist.txt ofstream out_stream1; // writes in items.txt ifstream in_stream2; // reads pricelist.txt ofstream out_stream3;// writes in plist.txt ifstream in_stream4;// read recipt.txt ofstream out_stream5;// write display.txt float price=' ',curr_total=0.0; int wrong=0; int itemnum=' '; char next; in_stream.open("ITEMLIST.txt", ios::in); // list of avaliable items out_stream1.open("listWititems.txt", ios::out); // list of avaliable items in_stream2.open("PRICELIST.txt", ios::in); out_stream3.open("listWitdollars.txt", ios::out); in_stream4.open("display.txt", ios::in); out_stream5.open("showitems.txt", ios::out); in_stream.close(); // closing files. out_stream1.close(); in_stream2.close(); out_stream3.close(); in_stream4.close(); out_stream5.close(); system("pause"); in_stream.setf(ios::fixed); while(in_stream.eof()) { in_stream >> itemnum; cin.clear(); cin >> next; } out_stream1.setf(ios::fixed); while (out_stream1.eof()) { out_stream1 << itemnum; cin.clear(); cin >> next; } in_stream2.setf(ios::fixed); in_stream2.setf(ios::showpoint); in_stream2.precision(2); while((price== (price*1.00)) && (itemnum == (itemnum*1))) { while (in_stream2 >> itemnum >> price) // gets itemnum and price { while (in_stream2.eof()) // reads file to end of file { in_stream2 >> itemnum; in_stream2 >> price; price++; curr_total= price++; in_stream2 >> curr_total; cin.clear(); // allows more reading cin >> next; } } } out_stream3.setf(ios::fixed); out_stream3.setf(ios::showpoint); out_stream3.precision(2); while((price== (price*1.00)) && (itemnum == (itemnum*1))) { while (out_stream3 << itemnum << price) { while (out_stream3.eof()) // reads file to end of file { out_stream3 << itemnum; out_stream3 << price; price++; curr_total= price++; out_stream3 << curr_total; cin.clear(); // allows more reading cin >> next; } return itemnum, price; } } in_stream4.setf(ios::fixed); in_stream4.setf(ios::showpoint); in_stream4.precision(2); while ( in_stream4.eof()) { in_stream4 >> itemnum >> price >> curr_total; cin.clear(); cin >> next; } out_stream5.setf(ios::fixed); out_stream5.setf(ios::showpoint); out_stream5.precision(2); out_stream5 <<setw(5)<< " itemnum " <<setw(5)<<" price "<<setw(5)<<" curr_total " <<endl; // sends items and prices to receipt.txt out_stream5 << setw(5) << itemnum << setw(5) <<price << setw(5)<< curr_total; // sends items and prices to receipt.txt out_stream5 << " You have a total of " << wrong++ << " errors " << endl; }

    Read the article

  • SharePoint logging to a list

    - by Norgean
    I recently worked in an environment with several servers. Locating the correct SharePoint log file for error messages, or development trace calls, is cumbersome. And once the solution hit the cloud, it got even worse, as we had no access to the log files at all. Obviously we are not the only ones with this problem, and the current trend seems to be to log to a list. This had become an off-hour project, so rather than do the sensible thing and find a ready-made solution, I decided to do it the hard way. So! Fire up Visual Studio, create yet another empty SharePoint solution, and start to think of some requirements. Easy on/offI want to be able to turn list-logging on and off.Easy loggingFor me, this means being able to use string.Format.Easy filteringLet's have the possibility to add some filtering columns; category and severity, where severity can be "verbose", "warning" or "error". Easy on/off Well, that's easy. Create a new web feature. Add an event receiver, and create the list on activation of the feature. Tear the list down on de-activation. I chose not to create a new content type; I did not feel that it would give me anything extra. I based the list on the generic list - I think a better choice would have been the announcement type. Approximately: public void CreateLog(SPWeb web)         {             var list = web.Lists.TryGetList(LogListName);             if (list == null)             {                 var listGuid = web.Lists.Add(LogListName, "Logging for the masses", SPListTemplateType.GenericList);                 list = web.Lists[listGuid];                 list.Title = LogListTitle;                 list.Update();                 list.Fields.Add(Category, SPFieldType.Text, false);                 var stringColl = new StringCollection();                 stringColl.AddRange(new[]{Error, Information, Verbose});                 list.Fields.Add(Severity, SPFieldType.Choice, true, false, stringColl);                 ModifyDefaultView(list);             }         }Should be self explanatory, but: only create the list if it does not already exist (d'oh). Best practice: create it with a Url-friendly name, and, if necessary, give it a better title. ...because otherwise you'll have to look for a list with a name like "Simple_x0020_Log". I've added a couple of fields; a field for category, and a 'severity'. Both to make it easier to find relevant log messages. Notice that I don't have to call list.Update() after adding the fields - this would cause a nasty error (something along the lines of "List locked by another user"). The function for deleting the log is exactly as onerous as you'd expect:         public void DeleteLog(SPWeb web)         {             var list = web.Lists.TryGetList(LogListTitle);             if (list != null)             {                 list.Delete();             }         } So! "All" that remains is to log. Also known as adding items to a list. Lots of different methods with different signatures end up calling the same function. For example, LogVerbose(web, message) calls LogVerbose(web, null, message) which again calls another method which calls: private static void Log(SPWeb web, string category, string severity, string textformat, params object[] texts)         {             if (web != null)             {                 var list = web.Lists.TryGetList(LogListTitle);                 if (list != null)                 {                     var item = list.AddItem(); // NOTE! NOT list.Items.Add… just don't, mkay?                     var text = string.Format(textformat, texts);                     if (text.Length > 255) // because the title field only holds so many chars. Sigh.                         text = text.Substring(0, 254);                     item[SPBuiltInFieldId.Title] = text;                     item[Degree] = severity;                     item[Category] = category;                     item.Update();                 }             } // omitted: Also log to SharePoint log.         } By adding a params parameter I can call it as if I was doing a Console.WriteLine: LogVerbose(web, "demo", "{0} {1}{2}", "hello", "world", '!'); Ok, that was a silly example, a better one might be: LogError(web, LogCategory, "Exception caught when updating {0}. exception: {1}", listItem.Title, ex); For performance reasons I use list.AddItem rather than list.Items.Add. For completeness' sake, let us include the "ModifyDefaultView" function that I deliberately skipped earlier.         private void ModifyDefaultView(SPList list)         {             // Add fields to default view             var defaultView = list.DefaultView;             var exists = defaultView.ViewFields.Cast<string>().Any(field => String.CompareOrdinal(field, Severity) == 0);               if (!exists)             {                 var field = list.Fields.GetFieldByInternalName(Severity);                 if (field != null)                     defaultView.ViewFields.Add(field);                 field = list.Fields.GetFieldByInternalName(Category);                 if (field != null)                     defaultView.ViewFields.Add(field);                 defaultView.Update();                   var sortDoc = new XmlDocument();                 sortDoc.LoadXml(string.Format("<Query>{0}</Query>", defaultView.Query));                 var orderBy = (XmlElement) sortDoc.SelectSingleNode("//OrderBy");                 if (orderBy != null && sortDoc.DocumentElement != null)                     sortDoc.DocumentElement.RemoveChild(orderBy);                 orderBy = sortDoc.CreateElement("OrderBy");                 sortDoc.DocumentElement.AppendChild(orderBy);                 field = list.Fields[SPBuiltInFieldId.Modified];                 var fieldRef = sortDoc.CreateElement("FieldRef");                 fieldRef.SetAttribute("Name", field.InternalName);                 fieldRef.SetAttribute("Ascending", "FALSE");                 orderBy.AppendChild(fieldRef);                   fieldRef = sortDoc.CreateElement("FieldRef");                 field = list.Fields[SPBuiltInFieldId.ID];                 fieldRef.SetAttribute("Name", field.InternalName);                 fieldRef.SetAttribute("Ascending", "FALSE");                 orderBy.AppendChild(fieldRef);                 defaultView.Query = sortDoc.DocumentElement.InnerXml;                 //defaultView.Query = "<OrderBy><FieldRef Name='Modified' Ascending='FALSE' /><FieldRef Name='ID' Ascending='FALSE' /></OrderBy>";                 defaultView.Update();             }         } First two lines are easy - see if the default view includes the "Severity" column. If it does - quit; our job here is done.Adding "severity" and "Category" to the view is not exactly rocket science. But then? Then we build the sort order query. Through XML. The lines are numerous, but boring. All to achieve the CAML query which is commented out. The major benefit of using the dom to build XML, is that you may get compile time errors for spelling mistakes. I say 'may', because although the compiler will not let you forget to close a tag, it will cheerfully let you spell "Name" as "Naem". Whichever you prefer, at the end of the day the view will sort by modified date and ID, both descending. I added the ID as there may be several items with the same time stamp. So! Simple logging to a list, with sensible a view, and with normal functionality for creating your own filterings. I should probably have added some more views in code, ready filtered for "only errors", "errors and warnings" etc. And it would be nice to block verbose logging completely, but I'm not happy with the alternatives. (yetanotherfeature or an admin page seem like overkill - perhaps just removing it as one of the choices, and not log if it isn't there?) Before you comment - yes, try-catches have been removed for clarity. There is nothing worse than having a logging function that breaks your site!

    Read the article

  • SQLAuthority News – Windows Efficiency Tricks and Tips – Personal Technology Tip

    - by pinaldave
    This is the second post in my series about my favorite Technology Tips, and I wanted to focus on my favorite Microsoft product.  Choosing just one topic to cover was too hard, though.  There are so many interesting things I have to share that I am forced to turn this second installment into a five-part post.  My five favorite Windows tips and tricks. 1) You can open multiple applications using the task bar. With the new Windows 7 taskbar, you can start navigating with just one click.  For example, you can launch Word by clicking on the icon on your taskbar, and if you are using multiple different programs at the same time, you can simply click on the icon to return to Word.  However, what if you need to open another Word document, or begin a new one?  Clicking on the Word icon is just going to bring you back to your original program.  Just click on the Word icon again while holding down the shift key, and you’ll open up a new document. 2) Navigate the screen with the touch of a button – and not your mouse button. Yes, we live in a pampered age.  We have access to amazing technology, and it just gets better every year.  But have you ever found yourself wishing that right when you were in the middle of something, you didn’t have to interrupt your work flow be reaching for your mouse to navigate through the screen?  Yes, we have all been guilty of this pampered wish.  But Windows has delivered!  Now you can move your application window using your arrow keys. Lock the window to the left, right hand screen: Win+left Arrow and Win+right Arrow Maximize & minimize: Win+up arrow and Win+down arrow Minimize all items on screen: Win+M Return to your original folder, or browse through all open windows: Alt+up arrow, Alt+Left Arrow, or Alt+right arrow Close down or reopen all windows: win+home 3) Are you one of the few people who still uses Command Prompt? You know who you are, and you aren’t ashamed to still use this option that so many people have forgotten about it.  You can easily access it by holding down the shift key while RIGHT clicking on any folder. 4) Quickly select multiple files without using your mouse. We all know how to select multiple files or folders by Ctrl-clicking or Shift-clicking multiple items.  But all of us have tried this, and then accidentally released Ctrl, only to lose all our precious work.  Now there is a way to select only the files you want through a check box system.  First, go to Windows Explorer, click Organize, and then “Folder and Search Options.”  Go to the View tab, and under advanced settings, you can find a box that says “Use check boxes to select items.”  Once this has been selected, you will be able to hover your mouse over any file and a check box will appear.  This makes selecting multiple, random files quick and easy. 5) Make more out of remote access. If you work anywhere in the tech field, you are probably the go-to for computer help with friends and family, and you know the usefulness of remote access (ok, some of us use this extensively at work, as well, but we all have friends and family who rely on our skills!).  Often it is necessary to restart a computer, which is impossible in remote access as the computer will not show the shutdown menu.  To force the computer to do your wishes, we return to Command Prompt.  Open Command Prompt and type “shutdown /s” for shutdown, or “shutdown /r” for restart. I hope you will find above five tricks which I use in my daily use very important. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority News, T SQL, Technology Tagged: Personal Technology

    Read the article

  • Kanban Tools Review

    - by GeekAgilistMercenary
    The first two sessions on Sunday were Collaboration and why it is so hard and the following, which was a perfect following session was on Kanban.  While in that second session two online Saas Style Tools were mentioned; AgileZen and Leankit.  I decided right then and there that I would throw together some first impressions and setup some sample projects.  I did this by setting up an account and creating the projects. Agile Zen Account Creation Setting up the initial account required an e-mail verification, which is understandable.  Within a few seconds it was mailed out and I was logged in. Setting Up the Kanban Board The initial setup of the board was pretty easy.  I maybe clicked around an extra few times, but overall everything I needed to use the tool was immediately available.  The representation of everything was very similar to what one expects in a real Kanban Board too.  This is a HUGE plus, especially if a team is smart and places this tool in a centrally viewable area to allow for visibility. Each of the board items is just like a post it, being blue, grey, green, pink, or one of another few colors.  Dragging them onto each swim lane on the board was flawless, making changes through the work super easy and intuitive. The other thing I really liked about AgileZen is that the Kanban Board had the swim lanes setup immediately.  One can change them, but when you know you immediately need a Ready Lane, Working Lane, and a Complete Lane it is nice to just have them right in front of you in the interface.  In addition, the Backlog is simply a little tab on the left hand side.  This is perfect for the Backlog Queue.  Out of the way, with the focus on the primary items. Once  I got the items onto the board I was easily able to get back to the actual work at hand versus playing around with the tool.  The fact that it was so easy to use, fast and easy UX, and overall a great layout put me back to work on things I needed to do versus sitting a playing with the tool.  That, in the end is the key to using these tools. LeanKit Kanban Account Creation Setting up the account got me straight into the online tool.  This I thought was pretty cool. Setting Up the Kanban Board Setting up the Kanban Board within Leankit was a bit of trouble.  There were multiple UX issues in regard to process and intuitiveness.  The Leankit basically forces one to design the whole board first, making no assumptions about how the board should look.  The swim lanes in my humble opinion should be setup immediately without any manipulation with the most common lanes;  ready, working, and complete. The other UX hiccup that I had a problem with is that as soon as I managed to get the swim lanes into place, I wanted to remove the redundant Backlog Lane.  The Backlog Lane, or Backlog Bucket should be somewhere that I accidentally added as a lane.  Then on top of that I screwed up and added an item inside the lane, which then prevented me from deleting the lane.  I had to go back out of the lane manipulation, remove the item, and then remove the excess lane.  Summary Leankit wasn't a bad interface, it just wasn't as good as AgileZen.  The AgileZen interface was just better UX design overall.  AgileZen also presents a much better user interface graphical design all together.  It is much closer to what the Kanban Board would look like if it were a physical Kanban Board.  Since one of the HUGE reasons for Kanban is to increase visibility, the fact the design is similar to what a real Kanban Board is actually a pretty big deal. This is an image (click for larger) that shows the two Kanban Boards side by side.  The one on the left is AgileZen and the right is Leankit. Original Entry

    Read the article

  • Direct3D11 and SharpDX - How to pass a model instance's world matrix as an input to a vertex shader

    - by Nathan Ridley
    Using Direct3D11, I'm trying to pass a matrix into my vertex shader from the instance buffer that is associated with a given model's vertices and I can't seem to construct my InputLayout without throwing an exception. The shader looks like this: cbuffer ConstantBuffer : register(b0) { matrix World; matrix View; matrix Projection; } struct VIn { float4 position: POSITION; matrix instance: INSTANCE; float4 color: COLOR; }; struct VOut { float4 position : SV_POSITION; float4 color : COLOR; }; VOut VShader(VIn input) { VOut output; output.position = mul(input.position, input.instance); output.position = mul(output.position, View); output.position = mul(output.position, Projection); output.color = input.color; return output; } The input layout looks like this: var elements = new[] { new InputElement("POSITION", 0, Format.R32G32B32_Float, 0, 0, InputClassification.PerVertexData, 0), new InputElement("INSTANCE", 0, Format.R32G32B32A32_Float, 0, 0, InputClassification.PerInstanceData, 1), new InputElement("COLOR", 0, Format.R32G32B32A32_Float, 12, 0) }; InputLayout = new InputLayout(device, signature, elements); The buffer initialization looks like this: public ModelDeviceData(Model model, Device device) { Model = model; var vertices = Helpers.CreateBuffer(device, BindFlags.VertexBuffer, model.Vertices); var instances = Helpers.CreateBuffer(device, BindFlags.VertexBuffer, Model.Instances.Select(m => m.WorldMatrix).ToArray()); VerticesBufferBinding = new VertexBufferBinding(vertices, Utilities.SizeOf<ColoredVertex>(), 0); InstancesBufferBinding = new VertexBufferBinding(instances, Utilities.SizeOf<Matrix>(), 0); IndicesBuffer = Helpers.CreateBuffer(device, BindFlags.IndexBuffer, model.Triangles); } The buffer creation helper method looks like this: public static Buffer CreateBuffer<T>(Device device, BindFlags bindFlags, params T[] items) where T : struct { var len = Utilities.SizeOf(items); var stream = new DataStream(len, true, true); foreach (var item in items) stream.Write(item); stream.Position = 0; var buffer = new Buffer(device, stream, len, ResourceUsage.Default, bindFlags, CpuAccessFlags.None, ResourceOptionFlags.None, 0); return buffer; } The line that instantiates the InputLayout object throws this exception: *HRESULT: [0x80070057], Module: [General], ApiCode: [E_INVALIDARG/Invalid Arguments], Message: The parameter is incorrect.* Note that the data for each model instance is simply an instance of SharpDX.Matrix. EDIT Based on Tordin's answer, it sems like I have to modify my code like so: var elements = new[] { new InputElement("POSITION", 0, Format.R32G32B32_Float, 0, 0, InputClassification.PerVertexData, 0), new InputElement("INSTANCE0", 0, Format.R32G32B32A32_Float, 0, 0, InputClassification.PerInstanceData, 1), new InputElement("INSTANCE1", 1, Format.R32G32B32A32_Float, 0, 0, InputClassification.PerInstanceData, 1), new InputElement("INSTANCE2", 2, Format.R32G32B32A32_Float, 0, 0, InputClassification.PerInstanceData, 1), new InputElement("INSTANCE3", 3, Format.R32G32B32A32_Float, 0, 0, InputClassification.PerInstanceData, 1), new InputElement("COLOR", 0, Format.R32G32B32A32_Float, 12, 0) }; and in the shader: struct VIn { float4 position: POSITION; float4 instance0: INSTANCE0; float4 instance1: INSTANCE1; float4 instance2: INSTANCE2; float4 instance3: INSTANCE3; float4 color: COLOR; }; VOut VShader(VIn input) { VOut output; matrix world = { input.instance0, input.instance1, input.instance2, input.instance3 }; output.position = mul(input.position, world); output.position = mul(output.position, View); output.position = mul(output.position, Projection); output.color = input.color; return output; } However I still get an exception.

    Read the article

  • Templated Razor Delegates – Phil Haack

    - by nmarun
    This post is largely based off of Phil Haack’s article titled Templated Razor Delegates. I strongly recommend reading this article first. Here’s a sample code for the same, so you can have a look at. I also have a custom type being rendered as a table. 1: // my custom type 2: public class Device 3: { 4: public int Id { get; set; } 5: public string Name { get; set; } 6: public DateTime MfgDate { get; set; } 7: } Now I can write an extension method just for this type. 1: public static class RazorExtensions 2: { 3: public static HelperResult List(this IList<Models.Device> devices, Func<Models.Device, HelperResult> template) 4: { 5: return new HelperResult(writer => 6: { 7: foreach (var device in devices) 8: { 9: template(device).WriteTo(writer); 10: } 11: }); 12: } 13: // ... 14: } Modified my view to make it a strongly typed one and included html to render my custom type collection in a table. 1: @using TemplatedRazorDelegates 2: @model System.Collections.Generic.IList<TemplatedRazorDelegates.Models.Device> 3:  4: @{ 5: ViewBag.Title = "Home Page"; 6: } 7:  8: <h2>@ViewBag.Message</h2> 9:  10: @{ 11: var items = new[] { "one", "two", "three" }; 12: IList<int> ints = new List<int> { 1, 2, 3 }; 13: } 14:  15: <ul> 16: @items.List(@<li>@item</li>) 17: </ul> 18: <ul> 19: @ints.List(@<li>@item</li>) 20: </ul> 21:  22: <table> 23: <tr><th>Id</th><th>Name</th><th>Mfg Date</th></tr> 24: @Model.List(@<tr><td>@item.Id</td><td>@item.Name</td><td>@item.MfgDate.ToShortDateString()</td></tr>) 25: </table> We get intellisense as well! Just added some items in the action method of the controller: 1: public ActionResult Index() 2: { 3: ViewBag.Message = "Welcome to ASP.NET MVC!"; 4: IList<Device> devices = new List<Device> 5: { 6: new Device {Id = 1, Name = "abc", MfgDate = new DateTime(2001, 10, 19)}, 7: new Device {Id = 2, Name = "def", MfgDate = new DateTime(2011, 1, 1)}, 8: new Device {Id = 3, Name = "ghi", MfgDate = new DateTime(2003, 3, 15)}, 9: new Device {Id = 4, Name = "jkl", MfgDate = new DateTime(2007, 6, 6)} 10: }; 11: return View(devices); 12: } Running this I get the output as: Absolutely brilliant! Thanks to both Phil Haack and to David Fowler for bringing this out to us. Download the code for this from here. Verdict: RazorViewEngine.Points += 1;

    Read the article

  • Get Pop Up Notifications for Your RSS Feeds with Feed Notifier

    - by DigitalGeekery
    Are you looking for a way to get updates from your favorite websites right to your desktop?  If so, you’ll want to check out Feed Notifier. This free Windows application runs in the system tray and delivers pop-up notifications to your desktop when your subscribed RSS feeds are updated. Download and install Feed Notifier. (Download link below) When you are finished installing, the Feed Notifier Preferences window will open. Click on the Add… button to add an RSS feed. Copy and paste the Feed URL into the text box and click Next. Choose your polling interval. This is how often your feed will be checked for new items. You can set your polling interval for days, hours, minutes, or even seconds. Click FInish. At your configured interval, Feed Notifier will check your feeds for new items. If new items are present, they will pop up above your system tray.  You’ll get an intro portion of the article. Simply Click the headline in the feed pop up… …to open the full article in your default browser. Setting Preferences Open the preferences of Feed Notifier, by going to Start > All Programs > Feed Notifier, or right clicking on the system tray icon and selecting Preferences. On the Pop-ups tab you can configure the duration in seconds that each article stays displayed on your screen. The default is five seconds. You can also change the size of the display, the theme, and the amount of content displayed.   The Options tab offers additional configurations like article caching and using a proxy server. Filter tab allows you to filter in or out certain content. To add a filter click Add…   … then type in the filter rule. You can even choose to apply it to only certain feeds. Click OK. Feed Notifier will display on the filters tab the number of times the filter is applied. Click OK when finished.   You can scroll though the articles by using the forward and back buttons at the lower left, or use the play / pause buttons to move though the articles in a slideshow-type fashion.   Feed Notifier is nice way to get your updated feeds directly to your desktop in a timely fashion. It’s supports all RSS and Atom feeds and features a clean look and feel with plenty of customizable options. Download Feed Notifier Similar Articles Productive Geek Tips Make Outlook Stop Using Internet Explorer’s RSS FeedsChange Default Feed Reader in FirefoxView Feedburner Subscriber Numbers Even if FeedCount is Not DisplayedSubscribe to RSS Feeds in Chrome with a Single ClickOrganize your RSS Feeds with FeedDemon TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Heaven & Hell Finder Icon Using TrueCrypt to Secure Your Data Quickly Schedule Meetings With NeedtoMeet Share Flickr Photos On Facebook Automatically Are You Blocked On Gtalk? Find out Discover Latest Android Apps On AppBrain

    Read the article

  • Ajax Autocomplete Extender

    - by Jason Ulloa
    El objetivo de este post es preparar un ejemplo sobre un tema que es planteado muy frecuentemente en los Foros de MSDN, como realizar un Autocomplete contra una base de datos. Qué requerimos? Antes de poder realizar un Autocomplete debemos tener en cuenta los elementos principales que requerimos para poder hacerlo funcionar, descritos de la siguiente manera: 1. Textbox: Nuestro grandioso amigo Textbox, que será donde el usuario ingresará los datos a buscar. 2. Un Webservice: que contendrá el método que se conectara a la base de datos y devolverá una lista con la información encontrada. 3. Ajax Autocomplete Extender: este es por decirlo así, el elemento más importante. Nos servirá como medio de enlace entre el webservice que expone el método y el textbox recuperando y mostrando los datos en forma de lista desplegable. La implementación Si bien parecierá complicado, crear un autocomplete extender es bastante sencillo. Empezaremos creando un nuevo sitio asp.net, en este sitio agregaremos un textbox y dos controles muy importantes de Ajax el ToolkitScriptManager para controlar el rende rizado de los script de ajax y el AutocompleteExtender que, como mencione anteriormente, será el medio de enlace. Antes de mostrar como quedará el código de lo anterior, explicaré algunas propiedades del AutocompleteExtender para que se entienda de mejor manera: 1. El ServicePath: contiene la ruta relativa al webservice que utilizaremos. 2. MinimumPrefixLength: se refiere al número de caracteres que deben ser digitados antes de iniciar la búsqueda. 3. ServiceMethod: el nombre del metodo de nuestro webservice que se encargará de devolver los datos. 4. EnableCaching: para mantener en cache los datos consultados, obteniendo mayor velocidad. 5. TargetControlID: una de las propiedades más importantes, acá se coloca el nombre del textbox al cual se unirá el Autocomplete 6. CompletionInterval: tiempo que debe transcurrir antes de iniciar con el trabajo de los datos. Una vez, explicadas las propiedades básicas, veamos como queda implementada la primer parte de nuestro autocomplete: <form id="form1" runat="server"> <div> <asp:ToolkitScriptManager ID="manager" runat="server" /> <asp:TextBox ID="TextBox1" runat="server"></asp:TextBox> <asp:AutoCompleteExtender ID="AutoCompleteExtender1" runat="server" ServicePath="WebService.asmx" MinimumPrefixLength="1" ServiceMethod="PersonasInfo " EnableCaching="true" TargetControlID="TextBox1" UseContextKey="True" CompletionSetCount="10" CompletionInterval="0"> </asp:AutoCompleteExtender> </div> </form>   Ahora que nuestro código html está completo, es hora de trabajar directamente con nuestro webservice, este deberá contener un método que devuelva una lista o arreglo de datos, los cuales por supuesto, serán traídos desde la base de datos. Antes de implementar este método, debemos asegurarnos de que nuestra clase del webservice tiene habilitados los espacios para ser utilizada [System.Web.Script.Services.ScriptService()] [WebService(Namespace = "http://tempuri.org/")] [WebServiceBinding(ConformsTo = WsiProfiles.BasicProfile1_1)] public class WebService : System.Web.Services.WebService {}   Ahora si, nuestro metodo principal [WebMethod()] [System.Web.Script.Services.ScriptMethod()] public string[] PersonasInfo(string prefixText, int count) { string connstring = ConfigurationManager.ConnectionStrings["LocalSqlServer"].ConnectionString;   using (SqlConnection conn = new SqlConnection(connstring)) { SqlCommand comando = new SqlCommand("select nombre from personas where nombre LIKE '%' + @param + '%' ", conn); comando.Parameters.AddWithValue("@param", prefixText); SqlDataReader dr = default(SqlDataReader); comando.Connection.Open(); dr = comando.ExecuteReader(); List<string> items = new List<string>();   while (dr.Read()) { items.Add(dr["nombre"].ToString()); } comando.Connection.Close(); return items.ToArray(); } }   Del método anterior no explicaré en profundidad, pues es bastante sencillo. Una consulta a la base de datos utilizando un datareader y devolviendo los datos en una lista como arreglo. Lo más importante serían las 2 primeras líneas [WebMethod()] y el [ScriptMethod()] las cuales habilitan nuestro método para poder ser accedido y utilizado. Por último, el código de ejemplo en C# (VB Autcomplete):

    Read the article

  • Restrict number of characters to be typed for af:autoSuggestBehavior

    - by Arunkumar Ramamoorthy
    When using AutoSuggestBehavior for a UI Component, the auto suggest list is displayed as soon as the user starts typing in the field. In this article, we will find how to restrict the autosuggest list to be displayed till the user types in couple of characters. This would be more useful in the low latency networks and also the autosuggest list is bigger. We could display a static message to let the user know that they need to type in more characters to get a list for picking a value from. Final output we would expect is like the below image Lets see how we can implement this. Assuming we have an input text for the users to enter the country name and an autosuggest behavior is added to it. <af:inputText label="Country" id="it1"> <af:autoSuggestBehavior /> </af:inputText> Also, assuming we have a VO (we'll name it as CountryView for this example), with a view criteria to filter out the VO based on the bind variable passed. Now, we would generate View Impl class from the java node (including bind variables) and then expose the setter method of the bind variable to client interface. In the View layer, we would create a tree binding for the VO and the method binding for the setter method of the bind variable exposed above, in the pagedef file As we've already added an input text and an autosuggestbehavior for the test, we would not need to build the suggested items for the autosuggest list.Let us add a method in the backing bean to return us List of select items to be bound to the autosuggest list. padding: 5px; background-color: #fbfbfb; min-height: 40px; width: 544px; height: 168px; overflow: auto;"> public List onSuggest(String searchTerm) { ArrayList<SelectItem> selectItems = new ArrayList<SelectItem>(); if(searchTerm.length()>1) { //get access to the binding context and binding container at runtime BindingContext bctx = BindingContext.getCurrent(); BindingContainer bindings = bctx.getCurrentBindingsEntry(); //set the bind variable value that is used to filter the View Object //query of the suggest list. The View Object instance has a View //Criteria assigned OperationBinding setVariable = (OperationBinding) bindings.get("setBind_CountryName"); setVariable.getParamsMap().put("value", searchTerm); setVariable.execute(); //the data in the suggest list is queried by a tree binding. JUCtrlHierBinding hierBinding = (JUCtrlHierBinding) bindings.get("CountryView1"); //re-query the list based on the new bind variable values hierBinding.executeQuery(); //The rangeSet, the list of queries entries, is of type //JUCtrlValueBndingRef. List<JUCtrlValueBindingRef> displayDataList = hierBinding.getRangeSet(); for (JUCtrlValueBindingRef displayData : displayDataList){ Row rw = displayData.getRow(); //populate the SelectItem list selectItems.add(new SelectItem( (String)rw.getAttribute("Name"), (String)rw.getAttribute("Name"))); } } else{ SelectItem a = new SelectItem("","Type in two or more characters..","",true); selectItems.add(a); } return selectItems; } So, what we are doing in the above method is, to check the length of the search term and if it is more than 1 (i.e 2 or more characters), the return the actual suggest list. Otherwise, create a read only select item new SelectItem("","Type in two or more characters..","",true); and add it to the list of suggested items to be displayed. The last parameter for the SelectItem (boolean) is to make it as readOnly, so that users would not be able to select this static message from the displayed list. Finally, bind this method to the input text's autosuggestbehavior's suggestedItems property. <af:inputText label="Country" id="it1"> <af:autoSuggestBehavior suggestedItems="#{AutoSuggestBean.onSuggest}"/> </af:inputText>

    Read the article

  • RemoveHandler Issues with Custom Events

    - by Jeff Certain
    This is a case of things being more complicated that I thought they should be. Since it took a while to figure this one out, I thought it was worth explaining and putting all of the pieces to the answer in one spot. Let me set the stage. Architecturally, I have the notion of generic producers and consumers. These put items onto, and remove items from, a queue. This provides a generic, thread-safe mechanism to load balance the creation and processing of work items in our application. Part of the IProducer(Of T) interface is: 1: Public Interface IProducer(Of T) 2: Event ItemProduced(ByVal sender As IProducer(Of T), ByVal item As T) 3: Event ProductionComplete(ByVal sender As IProducer(Of T)) 4: End Interface Nothing sinister there, is there? In order to simplify our developers’ lives, I wrapped the queue with some functionality to manage the produces and consumers. Since the developer can specify the number of producers and consumers that are spun up, the queue code manages adding event handlers as the producers and consumers are instantiated. Now, we’ve been having some memory leaks and, in order to eliminate the possibility that this was caused by weak references to event handles, I wanted to remove them. This is where it got dicey. My first attempt looked like this: 1: For Each producer As P In Producers 2: RemoveHandler producer.ItemProduced, AddressOf ItemProducedHandler 3: RemoveHandler producer.ProductionComplete, AddressOf ProductionCompleteHandler 4: producer.Dispose() 5: Next What you can’t see in my posted code are the warnings this caused. The 'AddressOf' expression has no effect in this context because the method argument to 'AddressOf' requires a relaxed conversion to the delegate type of the event. Assign the 'AddressOf' expression to a variable, and use the variable to add or remove the method as the handler.  Now, what on earth does that mean? Well, a quick Bing search uncovered a whole bunch of talk about delegates. The first solution I found just changed all parameters in the event handler to Object. Sorry, but no. I used generics precisely because I wanted type safety, not because I wanted to use Object. More searching. Eventually, I found this forum post, where Jeff Shan revealed a missing piece of the puzzle. The other revelation came from Lian_ZA in this post. However, these two only hinted at the solution. Trying some of what they suggested led to finally getting an invalid cast exception that revealed the existence of ItemProducedEventHandler. Hold on a minute! I didn’t create that delegate. There’s nothing even close to that name in my code… except the ItemProduced event in the interface. Could it be? Naaaaah. Hmmm…. Well, as it turns out, there is a delegate created by the compiler for each event. By explicitly creating a delegate that refers to the method in question, implicitly cast to the generated delegate type, I was able to remove the handlers: 1: For Each producer As P In Producers 2: Dim _itemProducedHandler As IProducer(Of T).ItemProducedEventHandler = AddressOf ItemProducedHandler 3: RemoveHandler producer.ItemProduced, _itemProducedHandler 4:  5: Dim _productionCompleteHandler As IProducer(Of T).ProductionCompleteEventHandler = AddressOf ProductionCompleteHandler 6: RemoveHandler producer.ProductionComplete, _productionCompleteHandler 7: producer.Dispose() 8: Next That’s “all” it took to finally be able to remove the event handlers and maintain type-safe code. Hopefully, this will save you the same challenges I had in trying to figure out how to fix this issue!

    Read the article

  • Auto-organized / smart inventory system?

    - by VeXe
    for the past week I've been working on an inventory system with Unity3D. At first I got help from the guys at Design3 but it wasn't too long till we split path, because I really didn't like the way they did their code, it didn't have any smell of OOP whatsoever. I took it further steps ahead - items take more than one slot, advanced placement system (items tries their best to find the best close fit), local mouse system (mouse gets trapped in active bag area), etc. Here's a demo of my work. What we would like to have in our game, is an auto-organizing feature - not auto-sort. We want this feature because our inventory's going to be in 'real-time' - not like in Resident Evil 1,2,3 etc where you would pause the game and do things in your inventory. Now imagine your self in a sticky situation surrounded by zombies, and you don't have bullets, you look around, you see that there are bullets nearby on the ground, so you go for them and try to pick them up, but they don't fit! you look at your inventory and find out that if you reorganize some of the items, it will fit! - now the player - in that situation doesn't have time to reorganize because he's surrounded with zombies and will die if he stops and organizes the inventory to make space (remember inventory in real-time, no pausing) - wouldn't it be nice for that to happen automatically? - Yes! (I believe this has been implemented in some games like Dungeon siege or something, so sure it's doable) take a look at this picture for example: Yes, so if you auto-sort the issue you will get your spaces but it's bad because: 1- Expensive: it doesn't need a whole sort operation to free those spaces, in the first picture, just slide the red item at the bottom to the very left, and you get the same spaces that you got from the auto-sort. 2- It's annoying to the player: "Who the F told you to re-order my stuff?" I'm not asking for "How to write the code" for this, I'm just asking for some guidance, where to look, what algorithms are involved? Is this something related to graphs and shortest path stuff? I hope not cuz I didn't manage to continue my college studies :/ But even if it is, just tell me and I will learn the stuff related. Notice there could be more than just one solution. So I guess the first thing I have to do is figure out if the situation is 'solvable' - if I know how to determine if a situation is solvable or not, then I can 'solve' it. I just need to know the conditions that makes it 'solvable'. And I believe there must be some algorithm/data structure for this. Here's a pic for more than one solution of trying to fit a 1x3 item: The arrows show just one of the solutions, but if you look you will find more than one. This is what I ultimately not auto-sorting but find a solution and applying it. Note that if I spend time on it I will come up with a way to solve it, but it wouldn't be the best way, it's like, holding a car wheel with your feet instead of your hands! XD Or just like trying to solve an issue that requires arrays, but you're not yet aware of their existence! So what is the right approach to this? Hope somebody helps, thanks a lot in advance :)

    Read the article

  • How to Mock HttpWebRequest and HttpWebResponse using the Moq Framework?

    - by Nicholas
    How do you use the Moq Framework to Mock HttpWebRequest and HttpWebResponse in the following Unit Test? [Test] public void Verify_That_SiteMap_Urls_Are_Reachable() { // Arrange - simplified Uri uri = new Uri("http://www.google.com"); // Act HttpWebRequest request = (HttpWebRequest)WebRequest.Create(uri); HttpWebResponse response = (HttpWebResponse)request.GetResponse(); // Asset Assert.AreEqual("OK", response.StatusCode.ToString()); }

    Read the article

  • WPF FlowDocument: force calculation of height etc. "off screen"

    - by Lars
    My target: a DocumentPaginator which takes a FlowDocument with a table, which splits the table to fit the pagesize and repeat the header/footer (special tagged TableRowGroups) on every page. For splitting the table I have to know the heights of its rows. While building the FlowDocument-table by code, the height/width of the TableRows are 0 (of course). If I assign this document to a FlowDocumentScrollViewer (PageSize is set), the heights etc. are calculated. Is this possible without using an UI-bound object? Instantiating a FlowDocumentScrollViewer which is not bound to a window doesn't force the pagination/calculation of the heights. This is how I determine the height of a TableRow (which works perfectly for documents shown by a FlowDocumentScrollViewer): FlowDocument doc = BuildNewDocument(); // what is the scrollviewer doing with the FlowDocument? FlowDocumentScrollViewer dv = new FlowDocumentScrollViewer(); dv.Document = doc; dv.Arrange(new Rect(0, 0, 0, 0)); TableRowGroup dataRows = null; foreach (Block b in doc.Blocks) { if (b is Table) { Table t = b as Table; foreach (TableRowGroup g in t.RowGroups) { if ((g.Tag is String) && ((String)g.Tag == "dataRows")) { dataRows = g; break; } } } if (dataRows != null) break; } if (dataRows != null) { foreach (TableRow r in dataRows.Rows) { double maxCellHeight = 0.0; foreach (TableCell c in r.Cells) { Rect start = c.ElementStart.GetCharacterRect(LogicalDirection.Forward); Rect end = c.ElementEnd.GetNextInsertionPosition(LogicalDirection.Backward).GetCharacterRect(LogicalDirection.Forward); double cellHeight = end.Bottom - start.Top; if (cellHeight > maxCellHeight) maxCellHeight = cellHeight; } System.Diagnostics.Trace.WriteLine("row " + dataRows.Rows.IndexOf(r) + " = " + maxCellHeight); } } Edit: I added the FlowDocumentScrollViewer to my example. The call of "Arrange" forces the FlowDocument to calculate its heights etc. I would like to know, what the FlowDocumentScrollViewer is doing with the FlowDocument, so I can do it without the UIElement. Is it possible?

    Read the article

  • how to club the data split by split function

    - by udaya
    Hi my data is dat1; the split statement is var splitstr = dat1.split("-"); I have splited the data from this format 2010 -02-02 to Element 0 = 2010 Element 1 = 05 Element 2 = 22 this format..Using split function, i want to arrange that like 2010,02,02 how can i do that

    Read the article

  • How do I create midi data to trigger an Ultrabeat pattern in Logic?

    - by user289581
    I've made some Ultrabeat patterns but I can't figure out how to trigger them. I make the pattern on C-1, then I go back to the arrange window and hit record and then hit C1 on my keyboard, and it doesn't play the pattern, it just plays a single note. I have Pattern Mode enabled on Ultrabeat and I'm using a one-shot trigger but I can't seem to trigger my pattern to play at all. What am I doing wrong?

    Read the article

  • How do I install ASP.NET MVC 2 Futures?

    - by Zack Peterson
    I want to use the DataAnnotations.DisplayAttribute.Order property to arrange my fields when using the DisplayForModel and EditorForModel methods. Related question: Does the DataAnnotations.DisplayAttribute.Order property not work with ASP.NET MVC 2? I think that I need to use the ASP.NET MVC 2 Futures. But I can't get it to work. How do I install ASP.NET MVC 2 Futures? Why are my fields still out of order?

    Read the article

  • How can I disable all images for an JFace menu but leave them enabled in the toolbar

    - by David
    If I create a set of actions to be used in a JFace application and I assign images to those actions, those images show up in both the toolbar (where I want them) and in the menus (where I don't want them). Other than supplying two completely separate sets of actions (which eliminates part of the point of actions in the first place), how can I arrange to have those images displayed ONLY in the toolbar, and have the menus display only text?

    Read the article

  • QT/PyQT best practice for using QT Designer

    - by pierocampanelli
    What is your development approach with QT/PYQT and QT Designer ? Are you doing this: Put all components on the panel (without any layout) and arrange them Put components in layout (Align Vertically/Horizontally/Form/Grid) Generate UI file and start coding how do you manage when you have custom widget ? For example when you have to fine tune behaviour of a QButton or QLineEdit ? Is it possible to add this custom widget to designer?

    Read the article

< Previous Page | 97 98 99 100 101 102 103 104 105 106 107 108  | Next Page >