Search Results

Search found 6411 results on 257 pages for 'binary vector'.

Page 101/257 | < Previous Page | 97 98 99 100 101 102 103 104 105 106 107 108  | Next Page >

• Optimizing Levenshtein Distance Algorithm

  - by Matt

  I have a stored procedure that uses Levenshtein Distance to determine the result closest to what the user typed. The only thing really affecting the speed is the function that calculates the Levenshtein Distance for all the records before selecting the record with the lowest distance (I've verified this by putting a 0 in place of the call to the Levenshtein function). The table has 1.5 million records, so even the slightest adjustment may shave off a few seconds. Right now the entire thing runs over 10 minutes. Here's the method I'm using: ALTER function dbo.Levenshtein ( @Source nvarchar(200), @Target nvarchar(200) ) RETURNS int AS BEGIN DECLARE @Source_len int, @Target_len int, @i int, @j int, @Source_char nchar, @Dist int, @Dist_temp int, @Distv0 varbinary(8000), @Distv1 varbinary(8000) SELECT @Source_len = LEN(@Source), @Target_len = LEN(@Target), @Distv1 = 0x0000, @j = 1, @i = 1, @Dist = 0 WHILE @j <= @Target_len BEGIN SELECT @Distv1 = @Distv1 + CAST(@j AS binary(2)), @j = @j + 1 END WHILE @i <= @Source_len BEGIN SELECT @Source_char = SUBSTRING(@Source, @i, 1), @Dist = @i, @Distv0 = CAST(@i AS binary(2)), @j = 1 WHILE @j <= @Target_len BEGIN SET @Dist = @Dist + 1 SET @Dist_temp = CAST(SUBSTRING(@Distv1, @j+@j-1, 2) AS int) + CASE WHEN @Source_char = SUBSTRING(@Target, @j, 1) THEN 0 ELSE 1 END IF @Dist > @Dist_temp BEGIN SET @Dist = @Dist_temp END SET @Dist_temp = CAST(SUBSTRING(@Distv1, @j+@j+1, 2) AS int)+1 IF @Dist > @Dist_temp SET @Dist = @Dist_temp BEGIN SELECT @Distv0 = @Distv0 + CAST(@Dist AS binary(2)), @j = @j + 1 END END SELECT @Distv1 = @Distv0, @i = @i + 1 END RETURN @Dist END Anyone have any ideas? Any input is appreciated. Thanks, Matt

  Read the article

• How does symbol binding work for shared libraries in linux

  - by bbazso

  When compiling a cpp program with g++ -O0 I noticed that my binary does not contain the symbol for the empty string (basic_string): _S_empty_rep_storage When I do compile this same program with -O2 I notice that the aforementioned symbol is indeed contained within the binary as follows (using nm on the bin): 00000000006029a0 V _ZNSs4_Rep20_S_empty_rep_storageE@@GLIBCXX_3.4 My application uses several .so (dynamic libraries) and when my aplication loads I notice that several of these .so files bind as follows (I set LD_DEBUG=all and ran my program): 28596: binding file /home/bbazso/usr/local/lib/mydynamiclib.so [0] to /usr/lib64/libstdc++.so.6 [0]: normal symbol `_ZNSs4_Rep20_S_empty_rep_storageE' [GLIBCXX_3.4] 28596: binding file /home/bbazso/usr/local/lib/mydynamiclib.so [0] to /home/bbazso/workspace/mytestapplication [0]: normal symbol `_ZNSs4_Rep20_S_empty_rep_storageE' [GLIBCXX_3.4] 28596: binding file /home/bbazso/workspace/mytestapplication [0] to /usr/lib64/libstdc++.so.6 [0]: normal symbol `_ZNSs4_Rep20_S_empty_rep_storageE' [GLIBCXX_3.4]** But I also noticed that one of my .so only binds as follows: 28087: binding file /home/bbazso/usr/local/lib/anotherdynamiclib.so [0] to /usr/lib64/libstdc++.so.6 [0]: normal symbol `_ZNSs4_Rep20_S_empty_rep_storageE' [GLIBCXX_3.4] but never binds to the binary (mytestapplication) as shown above for the mydynamiclib.so. So I was wondering what this actually means? Does this mean that anotherdynamiclib.so will use a different symbol for the empty string above than the rest of the application? I guess what I'm really asking is how does symbol binding work in the context of the example above? Thanks!

  Read the article

• Convert 4 bytes to int

  - by Oscar Reyes

  I'm reading a binary file like this: InputStream in = new FileInputStream( file ); byte[] buffer = new byte[1024]; while( ( in.read(buffer ) > -1 ) { int a = // ??? } What I want to do it to read up to 4 bytes and create a int value from those but, I don't know how to do it. I kind of feel like I have to grab 4 bytes at a time, and perform one "byte" operation ( like << & FF and stuff like that ) to create the new int What's the idiom for this? EDIT Ooops this turn out to be a bit more complex ( to explain ) What I'm trying to do is, read a file ( may be ascii, binary, it doesn't matter ) and extract the integers it may have. For instance suppose the binary content ( in base 2 ) : 00000000 00000000 00000000 00000001 00000000 00000000 00000000 00000010 The integer representation should be 1 , 2 right? :- / 1 for the first 32 bits, and 2 for the remaining 32 bits. 11111111 11111111 11111111 11111111 Would be -1 and 01111111 11111111 11111111 11111111 Would be Integer.MAX_VALUE ( 2147483647 )

  Read the article

• Image Wells, Core Data, and Sqlite files.

  - by Sway

  I've got a mac application that I've developed. I use it to create sqlite files that are bundled with my iphone app. The mac app uses Core Data and bindings and is working fine except for one "weird" issue. I use an NSImageView (or Image Well) to allow me to drag and drop jpg files. This is bound through to an optional binary attribute in my model class. For some reason when I drag and drop a 4k jpg file it onto the image well and save the sqlite file. The data saved to the binary column is over 15 times larger than it should be. Whereas if I use an application like SQLiteManager and add the image into the row in the database. The binary data is the correct (expected size). File 4k jpg Actual size: 2371. Persisted via Core Data size: 35810. Can anyone give me a suggestion as to why this might be happening? Do I need to set some setting in Interface Builder or write some custom code?

  Read the article

• html5 vs flash - full comparison chart anywhere?

  - by iddqd

  So since Steve Jobs said Flash sucks and implied that HTML5 can do everything Flash can without the need for a Plugin, I keep hearing those exact words from a lot of People. I would really like to have a Chart somewhere (similar to http://en.wikipedia.org/wiki/Comparison_of_layout_engines_%28HTML5%29#Form_elements_and_attributes ) that I can just show to those people. Showing all the little things that Flash can do right now, that HTML5/Ajax/CSS is not yet even thinking about. But of course also the things that HTML5 does better. I would like to see details compared like audio playback, realtime audio processing, byte level access, bitmap data manipulation, webcam access, binary sockets, stuff in the works such as P2P technology (adobe stratus) and all the stuff I don't know about myself. Ideally with examples of what can be accomplished with, lets say Binary Sockets (such as a POP3 client) because otherwise it won't mean a lot to non-programmers since they will just say "well we can do without Binary Sockets". And ideally with some current benchmarks and some examples of websites that use this technology. I've searched the web and am surprised not to find anything. So is there such a comparison somewhere? Or does anybody want to create this and post it to Wikipedia? ;-)

  Read the article

• Capturing exit status from STDIN in Perl

  - by zigdon

  I have a perl script that is run with a command like this: /path/to/binary/executable | /path/to/perl/script.pl The script does useful things to the output for the binary file, then exits once STDIN runs out (< returns undef). This is all well and good, except if the binary exits with a non-zero code. From the script's POV, it thinks the script just ended cleanly, and so it cleans up, and exits, with a code of 0. Is there a way for the perl script to see what the exit code was? Ideally, I'd want something like this to work: # close STDIN, and if there was an error, exit with that same error. unless (close STDIN) { print "error closing STDIN: $! ($?)\n"; exit $?; } But unfortunately, this doesn't seem to work: $ (date; sleep 3; date; exit 1) | /path/to/perl/script.pl /tmp/test.out Mon Jun 7 14:43:49 PDT 2010 Mon Jun 7 14:43:52 PDT 2010 $ echo $? 0 Is there a way to have it Do What I Mean?

  Read the article

• Libraries for developing NCPDP SCRIPT based systems (a standard for e-prescribing)

  - by Kaveh Shahbazian

  What are (based on experiences) best (commercial or open source) libraries for developing NCPDP-based systems? Background: NCPDP (National Council for Prescription Drug Programs) is a not-for-profit, ANSI-accredited, standards development organization. One of it's standards is the SCRIPT Standard for Electronic Prescribing, which allows PHARMACY, PRESCRIBER (i.e. Physician) and PAYERS (patient or more often insurer) communicate. So the SCRIPT standard is about data transmission. Problem: One step in implementing such systems is to develop models for data based on SCRIPT standard. These models should have utilities for serializing/deserializing to/from SCRIPT binary format and SCRIPT XML format (there are two distinct formats here; both must be supported). Here rises the problem (for me at least). To develop this subsystem for handling the model, implementing serializing and deserializing facilities and keep it uptodate with the SCRIPT standard specifications is a lot of work; it needs it's own team and team management issues (to support a standard implementation). So I am looking for a solution to this problem; to keep standard implementation out of the way and focusing on main problems. Thanks to all (Thankyou Freiheit for your hints!) Edit 2: Thanks to all for help! NCPDP (National Council for Prescription Drug Programs) is an standard for e-prescribing. It defines two formats for message transmission: binary and XML. Implementing XML is somehow easier because it is a standard format which in turn gives us more tooling options. The binary format has a very big specification and time-consuming to implement. I did not find an open source solution to work with. So I am looking for commercial alternatives. Edit 1: Please guide me; what's wrong with this question?

  Read the article

• From ASPX to WCF

  - by Barguast

  I'm hoping someone can advise me on how to solve my networking scenario. Both the client and server are to be C# / .NET based. I basically want to invoke some kind of web service from my client in order to retrieve both binary data (e.g. files) and serialised objects and lists of objects (e.g. database query results). At the moment, I'm using ASPX pages, using the query string to provide parameters and I get back either the binary data, or the binary data of the serialised messages. This affords me a lot of flexbility, and I can choose how to transmit the data, perform simulatanous requests, cancel ongoing requests, etc. Since I can control the serialised format, I can also deserialise lists of objects as they are received which is crucial. My problem isn't a problem as such, but this feels a little hack-ish and I can't help but wonder if there are better ways to go about it. I'm considering moving on to WCF or perhaps another technology to see if it helps. However, I need to know if it helps with my scenarios above that is; Can a WCF method return a list of objects, and can the client receive the items of this list as they arrive as opposed to getting the entire list on completion (i.e. streaming). Does anyone know of any examples of this? Am I likely to get any performance benefits from this? I don't know how well ASPX pages are tuned for this, as it surely isn't their primary purpose. Are there any other approaches I should consider? Thanks for your time spent reading this. I hope you can help.

  Read the article

• What header file is where the boost libray define its own primitive data type?

  - by ronghai

  Recently, I try to use the boost::spirit::qi binary endian parser to parse some binary data depends on the endianness of the Platform. There is a simple example, like following: Using declarations and variables: using boost::spirit::qi::little_word; using boost::spirit::qi::little_dword; using boost::spirit::qi::little_qword; boost::uint16_t us; boost::uint32_t ui; boost::uint64_t ul; Basic usage of the little endian binary parsers: test_parser_attr("\x01\x02", little_word, us); assert(us == 0x0201); test_parser_attr("\x01\x02\x03\x04", little_dword, ui); assert(ui == 0x04030201); test_parser_attr("\x01\x02\x03\x04\x05\x06\x07\x08", little_qword, ul); assert(ul == 0x0807060504030201LL); test_parser("\x01\x02", little_word(0x0201)); test_parser("\x01\x02\x03\x04", little_dword(0x04030201)); test_parser("\x01\x02\x03\x04\x05\x06\x07\x08", little_qword(0x0807060504030201LL)); It works very well. But my questions come, why do we need use some data types like boost::uint16_t, boost::uint32_t here? Can I use unsigned long or unsigned int here? And if I want to parse double or float data type, what boost data type should I use? And please tell me where is boost define the above these types? Thanks a lot.

  Read the article

• How to convert a printer driver to a stand-alone console application which can generate a printer fi

  - by Thorbjørn Ravn Andersen

  I have a situation where the only way to generate a certain datafile is to print it manually to FILE: under Windows and save it in a file for further processing. I would really like to have a small stand-alone program which embeds this binary printer driver so I can run it from a batch file and have it generate that binary file for me, as we can then fully automate the "save file in Visio, 'print' it and upload it to the final destination and trigger a remote test". Is this possible with a suitable Windows SDK? I am a Java programmer, so I do not know Visual Studio and the possibilities with MSDN - yet! - but I'd appreciate pointers. EDIT: I have the installation files for that printer driver, both 32 and 64 bit. Older versions may include a 16 bit driver. EDIT: The "print to FILE:" functionality is just what was recommended by the documentation. I have played a little bit with using the LPR-protocol to see what it can do. I'd still prefer the "invoke small binary" approach.

  Read the article

• Is it possible to use SqlGeography with Linq to Sql?

  - by cofiem

  I've been having quite a few problems trying to use Microsoft.SqlServer.Types.SqlGeography. I know full well that support for this in Ling to Sql is not great. I've tried numerous ways, beginning with what would the expected way (Database type of geography, CLR type of SqlGeography). This produces the NotSupportedException, which is widely discussed via blogs. I've then gone down the path of treating the geography column as a varbinary(max), as geography is a UDT stored as binary. This seems to work fine (with some binary reading and writing extension methods). However, I'm now running into a rather obscure issue, which does not seem to have happened to many other people. System.InvalidCastException: Unable to cast object of type 'Microsoft.SqlServer.Types.SqlGeography' to type 'System.Byte[]'. This error is thrown from an ObjectMaterializer when iterating through a query. It seems to only occur when the tables containing geography columns are included in a query implicitly (ie. using the EntityRef<> properties to do joins). System.Data.Linq.SqlClient.ObjectReaderCompiler.ObjectReader`2.MoveNext() My question: If I'm retrieving the geography column as varbinary(max), I might expect the reverse error: can't cast byte[] to SqlGeography. That I would understand. This I don't. I do have some properies on the partial LINQ to SQL classes that hide the binary conversion... could those be the issue? Any help appreciated, and I know there's probably not enough information.

  Read the article

• Writing a VM - well formed bytecode?

  - by David Titarenco

  Hi, I'm writing a virtual machine in C just for fun. Lame, I know, but luckily I'm on SO so hopefully no one will make fun :) I wrote a really quick'n'dirty VM that reads lines of (my own) ASM and does stuff. Right now, I only have 3 instructions: add, jmp, end. All is well and it's actually pretty cool being able to feed lines (doing it something like write_line(&prog[1], "jmp", regA, regB, 0); and then running the program: while (machine.code_pointer <= BOUNDS && DONE != true) { run_line(&prog[machine.cp]); } I'm using an opcode lookup table (which may not be efficient but it's elegant) in C and everything seems to be working OK. My question is more of a "best practices" question but I do think there's a correct answer to it. I'm making the VM able to read binary files (storing bytes in unsigned char[]) and execute bytecode. My question is: is it the VM's job to make sure the bytecode is well formed or is it just the compiler's job to make sure the binary file it spits out is well formed? I only ask this because what would happen if someone would edit a binary file and screw stuff up (delete arbitrary parts of it, etc). Clearly, the program would be buggy and probably not functional. Is this even the VM's problem? I'm sure that people much smarter than me have figured out solutions to these problems, I'm just curious what they are!

  Read the article

• How to define trees with more than one type in ML programing language

  - by user550413

  Well, I am asked to do the next thing: To define a binary tree which can contain 2 different types: ('a,'b) abtree and these are the requirements: Any inner vertex (not a leaf) must be of the type 'a or 'b and the leafs have no value. For every path in the tree all 'a values must appear before the 'b value: examples of paths: 'a->'a->'a-'b (legal) 'a->'b->'b (legal) 'a->'a->'a (legal) 'b->'b->'b (legal) 'a->'b->'a (ILLEGAL) and also I need to define another tree which is like the one described above but now I have got also 'c and in the second requirement it says that for every path I 'a values appear before the 'b values and all the 'b values appear before the 'c values. First, I am not sure how to define binary trees to have more than 1 type in them. I mean the simplest binary tree is: datatype 'a tree = leaf | br of 'a * 'a tree * 'a tree; And also how I can define a tree to have these requirements. Any help will be appreciated. Thanks.

  Read the article

• 32/64 bit problems with Eclipse CDT on Ubuntu

  - by waffleShirt

  I have just recently started running Linux on my PC and I am trying to start learning OpenGL. I am using the latest version of Eclipse CDT as my IDE, and my system is Ubuntu 10.10, 64 bit version. The problem I am having is that whenever I try to run a build from within the IDE I get the error message "Launch Failed. Binary Not Found." Ive done a lot of looking around on the internet but I still cant solve the problem. I know for a fact that the binary is built, it can be run from a terminal window. According to posts I have seen the problem is that Eclipse tries to run a 32 bit binary, but GCC 4.4.5 defaults to 64 bit binaries on a 64 bit system. Ive seen a lot of information about using the -m32 flag in makefiles, but then I still get the following output in Eclipse: make all g++ -o HelloWorld2 main.o /usr/bin/ld: i386 architecture of input file `main.o' is incompatible with i386:x86-64 output /usr/bin/ld: final link failed: Invalid operation collect2: ld returned 1 exit status make: *** [HelloWorld2] Error 1 What I would like to know is how to either get Eclipse to launch the 64 bit binaries, or have Eclipse correctly compile 32 bit binaries.

  Read the article

• Reading bmp file for encrypting and decrypting txt file into it

  - by Shantanu Gupta

  I am trying to read a bmp file in C++(Turbo). But i m not able to print binary stream. I want to encode txt file into it and decrypt it. How can i do this. I read that bmp file header is of 54 byte. But how and where should i append txt file in bmp file. ? I know only Turbo C++, so it would be helpfull for me if u provide solution or suggestion related to topic for the same. int main() { ifstream fr; //reads ofstream fw; // wrrites to file char c; int random; clrscr(); char file[2][100]={"s.bmp","s.txt"}; fr.open(file[0],ios::binary);//file name, mode of open, here input mode i.e. read only if(!fr) cout<<"File can not be opened."; fw.open(file[1],ios::app);//file will be appended if(!fw) cout<<"File can not be opened"; while(!fr) cout<<fr.get(); // error should be here. but not able to find out what error is it fr.close(); fw.close(); getch(); } This code is running fine when i pass txt file in binary mode

  Read the article

• Windows loader problem - turn on verbose mode

  - by doobop

  Hi, I'm in the process of reorganizing some of the legacy libraries in our application which has unmanaged code calling into libraries of managed code. While I have the code reorganized, it produces the following loader error: ... 'app.exe': Loaded 'C:\WINDOWS\system32\CsDisp.dll' 'app.exe': Loaded 'C:\WINDOWS\system32\psapi.dll' 'app.exe': Loaded 'C:\WINDOWS\system32\shell32.dll' 'app.exe': Loaded 'C:\appCode\Debug\daq206_32.dll', Binary was not built with debug information. 'app.exe': Loaded 'C:\appCode\Debug\SiUSBXp.dll', Binary was not built with debug information. 'app.exe': Loaded 'C:\appCode\Debug\AdlinkDAQ.dll', Symbols loaded. 'app.exe': Loaded 'C:\WINDOWS\system32\P9842.dll', Binary was not built with debug information. LDR: LdrRelocateImageWithBias() failed 0xc0000018 LDR: OldBase : 10000000 LDR: NewBase : 00A80000 LDR: Diff : 0x7c90d6fa0012f6cc LDR: NextOffset : 00000000 LDR: *NextOffset : 0x0 LDR: SizeOfBlock : 0xa80000 Debugger:: An unhandled non-continuable exception was thrown during process load I believe 0xc0000018 error is an overlapping address range. So, I have two questions. First, what linker options may cause this error? I'm currently linking with /DYNAMICBASE:NO and /FIXED:No as this was how some of the previous libraries were set up. Second, is there a way to turn on verbose mode for the loader so I can see what exactly it's trying to load? P9842 is a third party library so I imagine it is getting to one of my libraries after P9842 and failing on that one. Can I narrow it down? Thanks.

  Read the article

• BinaryFormatter in C# a good way to read files?

  - by mr-pac

  I want to read a binary file which was created outside of my program. One obvious way in C# to read a binary file is to define class representing the file and then use a BinaryReader and read from the file via the Read* methods and assign the return values to the class properties. What I don't like with the approach is that I manually have to write code that reads the file, although the defined structure represents how the file is stored. I also have to keep the order correct when I read. After looking a bit around I came across the BinaryFormatter which can automatically serialize and deserialze object in binary format. One great advantage would be that I can read and also write the file without creating additional code. However I wonder if this approach is good for files created from other programs on not just serialized .NET objects. Take for example a graphics format file like BMP. Would it be a good idea to read the file with a BinaryFormatter or is it better to manually and write via BinaryReader and BinaryWriter? Or are there any other approaches which suit better? I'am not looking for concrete examples but just for an advice what is the best way to implement that.

  Read the article

• Read varbinary data in java

  - by masoud farahani

  I made a Java application which reads some files from SQL server. Those files are saved to a varbinary(MAX) field in SQL Server by a third party web service. My problem is that when I want to read those files with my Java application, those binary data show different content in the Java application. In fact, I read data byte by byte and I figured out that some bytes did not show the real values which were saved in the database. I found out what the problem is, but I couldn’t find a solution yet. I found out that in the web service every varbinary data is saved to database as byte data (in .Net each byte takes 0 to 255). But, when I want to read the binary data in Java, it takes different values and cause an exception with some values, because in Java a byte value takes -127 to 127. In my Java application I want to write those data to a file by OutputStream.write(byte[]) method. How can I solve this problem? I think that I have to find a way to convert c# byte[] to a Java byte[] (or binary data), but how can I do that?

  Read the article

• What to set the scalar type to contain a byte []. Entity in MVC2

  - by Brad8118

  I'm trying out the EF 4.0 and using the Model first approach. I'd like to store images into the database and I'm not sure of the best type for the scalar in the entity. I currently have it(the image scalar type) setup as a binary. From what I have been reading the best way to store the image in the db is a byte[]. So I'm assuming that binary is the way to go. If there is a better way I'd switch. In my controller I have: //file from client to store in the db HttpPostedFileBase file = Request.Files[inputTagName]; if (file.ContentLength > 0) { keyToAdd.Image = new byte[file.ContentLength]; file.InputStream.Write(keyToAdd.Image, 0, file.ContentLength); } This builds fine but when I run it I get an exception writing the stream to keyToAdd.Image. The exception is something like: Method does not exist. Any ideas? Note that when using a EF 4.0 model first approach I only have int16, int32, double, string, decimal, binary, byte, DateTime, Double, Single, and SByte as available types. Thanks

  Read the article

• Microsoft Management Console stops working when I add snap-in to it

  - by JayaprakashReddy

  I have Windows 7 Ultimate OS. I'm opening mmc.exe as administrator and trying add Certificates or any other snap-in, then while loading that snap-in MMC breaks and displays following message and after that it closes automatically once I click on close button on that message. What could be the problem? I did following to fix the problem but couldn't succeed any of these: I tried to repair the OS I repaired files using this method Even repaired the installation using this link Update: *@oldskool: Here is the debug process output:* Sorry its a long output text. 'mmc.exe': Loaded 'C:\Windows\System32\mmc.exe', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\ntdll.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\kernel32.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\KernelBase.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\gdi32.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\user32.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\lpk.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\usp10.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\msvcrt.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\mfc42u.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\ole32.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\rpcrt4.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\oleaut32.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\odbc32.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\advapi32.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\sechost.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\mmcbase.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\shlwapi.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\uxtheme.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\duser.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\imm32.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\msctf.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\odbcint.dll', Binary was not built with debug information. 'mmc.exe': Loaded 'C:\Windows\System32\dui70.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\winsxs\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7600.16661_none_420fe3fa2b8113bd\comctl32.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\shell32.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\cryptbase.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\urlmon.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\wininet.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\iertutil.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\crypt32.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\msasn1.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\clbcatq.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\mmcndmgr.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\dwmapi.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\oleacc.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\cryptsp.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\rsaenh.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\RpcRtRemote.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\mlang.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\xmllite.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\version.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\apphelp.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\msi.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Program Files\Microsoft Visual Studio 8\SDK\v2.0\Bin\mscormmc.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\mscoree.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\winsxs\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4927_none_d08a205e442db5b5\msvcr80.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\azroleui.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\atl.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\secur32.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\netutils.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\dsrole.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\logoncli.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\dsuiext.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\ntdsapi.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\ws2_32.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\nsi.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\activeds.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\adsldpc.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\Wldap32.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\mpr.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\netapi32.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\srvcli.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\wkscli.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\certmgr.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\certcli.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\CertEnroll.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\cryptui.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\ncrypt.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\bcrypt.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\wintrust.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\imagehlp.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\sspicli.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\aclui.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\IPHLPAPI.DLL', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\winnsi.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\slc.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\comsnap.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\mfc42.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\mycomput.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\devmgr.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\setupapi.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\cfgmgr32.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\devobj.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\devrtl.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\newdev.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\dmdskmgr.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\dmutil.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\dmdskres.dll', Binary was not built with debug information. 'mmc.exe': Loaded 'C:\Windows\System32\dmdskres2.dll', Binary was not built with debug information. 'mmc.exe': Loaded 'C:\Windows\System32\gpedit.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\dssec.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\authz.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\dfscli.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\samcli.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\gpapi.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\framedynos.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\wtsapi32.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\ipsmsnap.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\winipsec.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\userenv.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\profapi.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\ipsecsnp.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\polstore.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\localsec.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\wdc.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\pdh.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\pdhui.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\comdlg32.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\credui.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\wevtapi.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\pla.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\tdh.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\winsta.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\utildll.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\browcli.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\vdmdbg.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\pmcsnap.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\winspool.drv', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\puiapi.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\wsecedit.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\scecli.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\filemgmt.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Program Files\Microsoft SQL Server\100\Tools\Binn\SqlManager.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\winsxs\x86_microsoft.vc80.mfc_1fc8b3b9a1e18e3b_8.0.50727.4053_none_cbf21254470d8752\mfc80u.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\winsxs\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4927_none_d08a205e442db5b5\msvcp80.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\winsxs\x86_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.4053_none_d1c738ec43578ea1\ATL80.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\winsxs\x86_microsoft.windows.common-controls_6595b64144ccf1df_5.82.7600.16661_none_ebfb56996c72aefc\comctl32.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\winsxs\x86_microsoft.vc80.mfcloc_1fc8b3b9a1e18e3b_8.0.50727.4053_none_03ca5532205cb096\mfc80ENU.dll', Binary was not built with debug information. 'mmc.exe': Loaded 'C:\Program Files\Microsoft SQL Server\100\Tools\Binn\Resources\1033\SqlManager.rll', Binary was not built with debug information. 'mmc.exe': Loaded 'C:\Windows\System32\msxml6.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Program Files\Microsoft SQL Server\90\Tools\Binn\SqlManager.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\wbem\wbemcntl.dll', Cannot find or open the PDB file The thread 'Win32 Thread' (0xf74) has exited with code 0 (0x0). Unhandled exception at 0x774d35e3 in mmc.exe: 0xC0000374: A heap has been corrupted.

  Read the article

• How to fix "ruby installation is missing psych (for YAML output)." on CentOS?

  - by ohho

  After rvm installation on CentOS 5.8: [rails@localhost ~]$ rvm -v rvm 1.16.17 [rails@localhost ~]$ which ruby ~/.rvm/rubies/ruby-1.9.3-p286/bin/ruby [rails@localhost ~]$ ruby -v ruby 1.9.3p286 (2012-10-12 revision 37165) [i686-linux] [rails@localhost ~]$ which gem ~/.rvm/rubies/ruby-1.9.3-p286/bin/gem there is a warning: $ gem -v /home/rails/.rvm/rubies/ruby-1.9.3-p286/lib/ruby/1.9.1/yaml.rb:56:in `<top (required)>': It seems your ruby installation is missing psych (for YAML output). To eliminate this warning, please install libyaml and reinstall your ruby. 1.8.24 I followed some advice: $ rvm pkg install libyaml Fetching yaml-0.1.4.tar.gz to /home/rails/.rvm/archives Extracting yaml-0.1.4.tar.gz to /home/rails/.rvm/src Prepare yaml in /home/rails/.rvm/src/yaml-0.1.4. Configuring yaml in /home/rails/.rvm/src/yaml-0.1.4. Compiling yaml in /home/rails/.rvm/src/yaml-0.1.4. Installing yaml to /home/rails/.rvm/usr Please note that it's required to reinstall all rubies: rvm reinstall all --force and then: $ rvm reinstall all --force Removing /home/rails/.rvm/src/ruby-1.8.7-p371... Removing /home/rails/.rvm/rubies/ruby-1.8.7-p371... No binary rubies available for: centos/5.8/i386/ruby-1.8.7-p371. Continuing with compilation. Please read 'rvm mount' to get more information on binary rubies. Installing Ruby from source to: /home/rails/.rvm/rubies/ruby-1.8.7-p371, this may take a while depending on your cpu(s)... ruby-1.8.7-p371 - #downloading ruby-1.8.7-p371, this may take a while depending on your connection... ruby-1.8.7-p371 - #extracting ruby-1.8.7-p371 to /home/rails/.rvm/src/ruby-1.8.7-p371 ruby-1.8.7-p371 - #extracted to /home/rails/.rvm/src/ruby-1.8.7-p371 Applying patch /home/rails/.rvm/patches/ruby/1.8.7/stdout-rouge-fix.patch Applying patch /home/rails/.rvm/patches/ruby/1.8.7/no_sslv2.diff ruby-1.8.7-p371 - #configuring ruby-1.8.7-p371 - #compiling ruby-1.8.7-p371 - #installing Removing old Rubygems files... Installing rubygems-1.8.24 for ruby-1.8.7-p371 ... Installation of rubygems completed successfully. Saving wrappers to '/home/rails/.rvm/bin'. ruby-1.8.7-p371 - #adjusting #shebangs for (gem irb erb ri rdoc testrb rake). ruby-1.8.7-p371 - #importing default gemsets (/home/rails/.rvm/gemsets/) Install of ruby-1.8.7-p371 - #complete Please be aware that you just installed a ruby that requires 2 patches just to be compiled on up to date linux system. This may have known and unaccounted for security vulnerabilities. Please consider upgrading to Ruby 1.9.3-286 which will have all of the latest security patches. Making gemset ruby-1.8.7-p371 pristine. Making gemset ruby-1.8.7-p371@global pristine. Removing /home/rails/.rvm/src/ruby-1.9.3-p286... Removing /home/rails/.rvm/rubies/ruby-1.9.3-p286... No binary rubies available for: centos/5.8/i386/ruby-1.9.3-p286. Continuing with compilation. Please read 'rvm mount' to get more information on binary rubies. Installing Ruby from source to: /home/rails/.rvm/rubies/ruby-1.9.3-p286, this may take a while depending on your cpu(s)... ruby-1.9.3-p286 - #downloading ruby-1.9.3-p286, this may take a while depending on your connection... ruby-1.9.3-p286 - #extracting ruby-1.9.3-p286 to /home/rails/.rvm/src/ruby-1.9.3-p286 ruby-1.9.3-p286 - #extracted to /home/rails/.rvm/src/ruby-1.9.3-p286 ruby-1.9.3-p286 - #configuring ruby-1.9.3-p286 - #compiling ruby-1.9.3-p286 - #installing Removing old Rubygems files... Installing rubygems-1.8.24 for ruby-1.9.3-p286 ... Installation of rubygems completed successfully. Saving wrappers to '/home/rails/.rvm/bin'. ruby-1.9.3-p286 - #adjusting #shebangs for (gem irb erb ri rdoc testrb rake). ruby-1.9.3-p286 - #importing default gemsets (/home/rails/.rvm/gemsets/) Install of ruby-1.9.3-p286 - #complete Making gemset ruby-1.9.3-p286 pristine. Making gemset ruby-1.9.3-p286@global pristine. Too bad, the warning is still there: $ gem -v /home/rails/.rvm/rubies/ruby-1.9.3-p286/lib/ruby/1.9.1/yaml.rb:56:in `<top (required)>': It seems your ruby installation is missing psych (for YAML output). To eliminate this warning, please install libyaml and reinstall your ruby. 1.8.24 How can I get rid of the warning? UPDATE: (applying rvm reinstall 1.9.3 --movable) $ rvm reinstall 1.9.3 --movable Removing /home/rails/.rvm/src/ruby-1.9.3-p286... Removing /home/rails/.rvm/rubies/ruby-1.9.3-p286... Fetching yaml-0.1.4.tar.gz to /home/rails/.rvm/archives Extracting yaml-0.1.4.tar.gz to /home/rails/.rvm/src Prepare yaml in /home/rails/.rvm/src/yaml-0.1.4. Configuring yaml in /home/rails/.rvm/src/yaml-0.1.4. Compiling yaml in /home/rails/.rvm/src/yaml-0.1.4. Installing yaml to /home/rails/.rvm/rubies/ruby-1.9.3-p286 Installing Ruby from source to: /home/rails/.rvm/rubies/ruby-1.9.3-p286, this may take a while depending on your cpu(s)... ruby-1.9.3-p286 - #downloading ruby-1.9.3-p286, this may take a while depending on your connection... ruby-1.9.3-p286 - #extracting ruby-1.9.3-p286 to /home/rails/.rvm/src/ruby-1.9.3-p286 ruby-1.9.3-p286 - #extracted to /home/rails/.rvm/src/ruby-1.9.3-p286 Applying patch /home/rails/.rvm/patches/ruby/1.9.3/ruby-multilib.patch Error running 'patch -F 25 -p1 -N -f -i /home/rails/.rvm/patches/ruby/1.9.3/ruby-multilib.patch', please read /home/rails/.rvm/log/ruby-1.9.3-p286/patch.apply.ruby-multilib.log There has been an error applying the specified patches. Halting the installation. Making gemset ruby-1.9.3-p286 pristine. Making gemset ruby-1.9.3-p286@global pristine.

  Read the article

• build error with boost spirit grammar (boost 1.43 and g++ 4.4.1)

  - by lurscher

  I'm having issues getting a small spirit/qi grammar to compile. The build stack trace is fugly enought to not make any sense to me (despite some assertion_failed i could notice in there but that didn't brought much information) the input grammar header: inputGrammar.h #include <boost/config/warning_disable.hpp> #include <boost/spirit/include/qi.hpp> #include <boost/spirit/include/phoenix_core.hpp> #include <boost/spirit/include/phoenix_operator.hpp> #include <boost/spirit/include/phoenix_fusion.hpp> #include <boost/spirit/include/phoenix_stl.hpp> #include <boost/fusion/include/adapt_struct.hpp> #include <boost/variant/recursive_variant.hpp> #include <boost/foreach.hpp> #include <iostream> #include <fstream> #include <string> #include <vector> namespace sp = boost::spirit; namespace qi = boost::spirit::qi; using namespace boost::spirit::ascii; //using namespace boost::spirit::arg_names; namespace fusion = boost::fusion; namespace phoenix = boost::phoenix; using phoenix::at_c; using phoenix::push_back; template< typename Iterator , typename ExpressionAST > struct InputGrammar : qi::grammar<Iterator, ExpressionAST(), space_type> { InputGrammar() : InputGrammar::base_type( block ) { tag = sp::lexeme[+(alpha) [sp::_val += sp::_1]];//[+(char_ - '<') [_val += _1]]; block = sp::lit("block") [ at_c<0>(sp::_val) = sp::_1] >> "(" >> *instruction[ push_back( at_c<1>(sp::_val) , sp::_1 ) ] >> ")"; command = tag [ at_c<0>(sp::_val) = sp::_1] >> "(" >> *instruction [ push_back( at_c<1>(sp::_val) , sp::_1 )] >> ")"; instruction = ( command | tag ) [sp::_val = sp::_1]; } qi::rule< Iterator , std::string() , space_type > tag; qi::rule< Iterator , ExpressionAST() , space_type > block; qi::rule< Iterator , ExpressionAST() , space_type > function_def; qi::rule< Iterator , ExpressionAST() , space_type > command; qi::rule< Iterator , ExpressionAST() , space_type > instruction; }; the test build program: i seems the build fails at qi::phrase_parse, i am using boost 1.43 and g++ 4.4.1 #include <iostream> #include <string> #include <vector> using namespace std; //my grammar #include <InputGrammar.h> struct MockExpressionNode { std::string name; std::vector< MockExpressionNode > operands; typedef std::vector< MockExpressionNode >::iterator iterator; typedef std::vector< MockExpressionNode >::const_iterator const_iterator; iterator begin() { return operands.begin(); } const_iterator begin() const { return operands.begin(); } iterator end() { return operands.end(); } const_iterator end() const { return operands.end(); } bool is_leaf() const { return ( operands.begin() == operands.end() ); } }; BOOST_FUSION_ADAPT_STRUCT( MockExpressionNode, (std::string, name) (std::vector<MockExpressionNode>, operands) ) int const tabsize = 4; void tab(int indent) { for (int i = 0; i < indent; ++i) std::cout << ' '; } template< typename ExpressionNode > struct ExpressionNodePrinter { ExpressionNodePrinter(int indent = 0) : indent(indent) { } void operator()(ExpressionNode const& node) const { cout << " tag: " << node.name << endl; for (int i=0 ; i < node.operands.size() ; i++ ) { tab( indent ); cout << " arg "<<i<<": "; ExpressionNodePrinter(indent + 2)( node.operands[i]); cout << endl; } } int indent; }; int test() { MockExpressionNode root; InputGrammar< string::const_iterator , MockExpressionNode > g(); std::string litA = "litA"; std::string litB = "litB"; std::string litC = "litC"; std::string litD = "litD"; std::string litE = "litE"; std::string litF = "litF"; std::string source = litA+"( "+litB+" ,"+litC+" , "+ litD+" ( "+litE+", "+litF+" ) "+ " )"; string::const_iterator iter = source.begin(); string::const_iterator end = source.end(); bool r = qi::phrase_parse( iter , end , g , root , space ); ExpressionNodePrinter< MockExpressionNode > np; np( root ); }; int main() { test(); } finally, the build error is the following: /usr/bin/make -f nbproject/Makefile-linux_amd64_devel.mk SUBPROJECTS= .build-conf make[1]: se ingresa al directorio `/home/mineq/NetBeansProjects/InputParserTests' /usr/bin/make -f nbproject/Makefile-linux_amd64_devel.mk dist/linux_amd64_devel/GNU-Linux-x86/vpuinputparsertests make[2]: se ingresa al directorio `/home/mineq/NetBeansProjects/InputParserTests' mkdir -p build/linux_amd64_devel/GNU-Linux-x86 rm -f build/linux_amd64_devel/GNU-Linux-x86/tests_main.o.d g++ `llvm-config --cxxflags` `pkg-config --cflags unittest-cpp` `pkg-config --cflags boost-1.43` `pkg-config --cflags boost-coroutines` -c -g -I../InputParser -MMD -MP -MF build/linux_amd64_devel/GNU-Linux-x86/tests_main.o.d -o build/linux_amd64_devel/GNU-Linux-x86/tests_main.o tests_main.cpp from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/auto.hpp:16, from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi.hpp:15, from /home/mineq/third_party/boost_1_43_0/boost/spirit/include/qi.hpp:16, from ../InputParser/InputGrammar.h:12, from tests_main.cpp:14: /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp: In function ‘bool boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, boost::spirit::qi::skip_flag::enum_type, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::proto::exprns_::expr<boost::proto::tag::terminal, boost::proto::argsns_::term<boost::spirit::tag::char_code<boost::spirit::tag::space, boost::spirit::char_encoding::ascii> >, 0l>]’: In file included from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/detail/parse_auto.hpp:14, /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp:125: instantiated from ‘bool boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::spirit::ascii::space_type]’ tests_main.cpp:206: instantiated from here /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp:99: error: no matching function for call to ‘assertion_failed(mpl_::failed************ (boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, boost::spirit::qi::skip_flag::enum_type, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::proto::exprns_::expr<boost::proto::tag::terminal, boost::proto::argsns_::term<boost::spirit::tag::char_code<boost::spirit::tag::space, boost::spirit::char_encoding::ascii> >, 0l>]::error_invalid_expression::************)(InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode> (*)()))’ /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp:125: instantiated from ‘bool boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::spirit::ascii::space_type]’ tests_main.cpp:206: instantiated from here /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp:100: error: no matching function for call to ‘assertion_failed(mpl_::failed************ (boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, boost::spirit::qi::skip_flag::enum_type, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::proto::exprns_::expr<boost::proto::tag::terminal, boost::proto::argsns_::term<boost::spirit::tag::char_code<boost::spirit::tag::space, boost::spirit::char_encoding::ascii> >, 0l>]::error_invalid_expression::************)(MockExpressionNode))’ from /home/mineq/third_party/boost_1_43_0/boost/proto/proto.hpp:12, from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/support/meta_compiler.hpp:17, from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/meta_compiler.hpp:14, from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/action/action.hpp:14, from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/action.hpp:14, from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi.hpp:14, from /home/mineq/third_party/boost_1_43_0/boost/spirit/include/qi.hpp:16, from ../InputParser/InputGrammar.h:12, from tests_main.cpp:14: /home/mineq/third_party/boost_1_43_0/boost/proto/detail/expr0.hpp: At global scope: /home/mineq/third_party/boost_1_43_0/boost/proto/proto_fwd.hpp: In instantiation of ‘boost::proto::exprns_::expr<boost::proto::tag::terminal, boost::proto::argsns_::term<InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>()>, 0l>’: In file included from /home/mineq/third_party/boost_1_43_0/boost/proto/core.hpp:13, /home/mineq/third_party/boost_1_43_0/boost/utility/enable_if.hpp:59: instantiated from ‘boost::disable_if<boost::proto::result_of::is_expr<boost::proto::exprns_::expr<boost::proto::tag::terminal, boost::proto::argsns_::term<InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>()>, 0l>, void>, void>’ /home/mineq/third_party/boost_1_43_0/boost/spirit/home/support/meta_compiler.hpp:200: instantiated from ‘boost::spirit::result_of::compile<boost::spirit::qi::domain, InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), boost::fusion::unused_type, void>’ /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp:107: instantiated from ‘bool boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, boost::spirit::qi::skip_flag::enum_type, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::proto::exprns_::expr<boost::proto::tag::terminal, boost::proto::argsns_::term<boost::spirit::tag::char_code<boost::spirit::tag::space, boost::spirit::char_encoding::ascii> >, 0l>]’ /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp:125: instantiated from ‘bool boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::spirit::ascii::space_type]’ tests_main.cpp:206: instantiated from here /home/mineq/third_party/boost_1_43_0/boost/proto/detail/expr0.hpp:64: error: field ‘boost::proto::exprns_::expr<boost::proto::tag::terminal, boost::proto::argsns_::term<InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>()>, 0l>::child0’ invalidly declared function type from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/auto.hpp:16, from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi.hpp:15, from /home/mineq/third_party/boost_1_43_0/boost/spirit/include/qi.hpp:16, from ../InputParser/InputGrammar.h:12, from tests_main.cpp:14: /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp: In function ‘bool boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, boost::spirit::qi::skip_flag::enum_type, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::proto::exprns_::expr<boost::proto::tag::terminal, boost::proto::argsns_::term<boost::spirit::tag::char_code<boost::spirit::tag::space, boost::spirit::char_encoding::ascii> >, 0l>]’: In file included from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/detail/parse_auto.hpp:14, /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp:125: instantiated from ‘bool boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::spirit::ascii::space_type]’ tests_main.cpp:206: instantiated from here /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp:107: error: request for member ‘parse’ in ‘boost::spirit::compile [with Domain = boost::spirit::qi::domain, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>()](((InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode> (&)())((InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode> (*)())expr)))’, which is of non-class type ‘InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>()’ from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/auto.hpp:15, from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi.hpp:15, from /home/mineq/third_party/boost_1_43_0/boost/spirit/include/qi.hpp:16, from ../InputParser/InputGrammar.h:12, from tests_main.cpp:14: /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/skip_over.hpp: In function ‘void boost::spirit::qi::skip_over(Iterator&, const Iterator&, const T&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, T = boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, boost::spirit::qi::skip_flag::enum_type, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::proto::exprns_::expr<boost::proto::tag::terminal, boost::proto::argsns_::term<boost::spirit::tag::char_code<boost::spirit::tag::space, boost::spirit::char_encoding::ascii> >, 0l>]::skipper_type]’: In file included from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/auto/auto.hpp:19, /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp:112: instantiated from ‘bool boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, boost::spirit::qi::skip_flag::enum_type, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::proto::exprns_::expr<boost::proto::tag::terminal, boost::proto::argsns_::term<boost::spirit::tag::char_code<boost::spirit::tag::space, boost::spirit::char_encoding::ascii> >, 0l>]’ /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp:125: instantiated from ‘bool boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::spirit::ascii::space_type]’ tests_main.cpp:206: instantiated from here /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/skip_over.hpp:27: error: ‘const struct MockExpressionNode’ has no member named ‘parse’ make[2]: *** [build/linux_amd64_devel/GNU-Linux-x86/tests_main.o] Error 1 make[2]: se sale del directorio `/home/mineq/NetBeansProjects/InputParserTests' make[1]: *** [.build-conf] Error 2 make[1]: se sale del directorio `/home/mineq/NetBeansProjects/InputParserTests' make: *** [.build-impl] Error 2 BUILD FAILED (exit value 2, total time: 1m 48s)

  Read the article

• Ball to Ball Collision - Detection and Handling

  - by Simucal

  With the help of the Stack Overflow community I've written a pretty basic-but fun physics simulator. You click and drag the mouse to launch a ball. It will bounce around and eventually stop on the "floor". My next big feature I want to add in is ball to ball collision. The ball's movement is broken up into a x and y speed vector. I have gravity (small reduction of the y vector each step), I have friction (small reduction of both vectors each collision with a wall). The balls honestly move around in a surprisingly realistic way. I guess my question has two parts: What is the best method to detect ball to ball collision? Do I just have an O(n^2) loop that iterates over each ball and checks every other ball to see if it's radius overlaps? What equations do I use to handle the ball to ball collisions? Physics 101 How does it effect the two balls speed x/y vectors? What is the resulting direction the two balls head off in? How do I apply this to each ball? Handling the collision detection of the "walls" and the resulting vector changes were easy but I see more complications with ball-ball collisions. With walls I simply had to take the negative of the appropriate x or y vector and off it would go in the correct direction. With balls I don't think it is that way. Some quick clarifications: for simplicity I'm ok with a perfectly elastic collision for now, also all my balls have the same mass right now, but I might change that in the future. In case anyone is interested in playing with the simulator I have made so far, I've uploaded the source here (EDIT: Check the updated source below). Edit: Resources I have found useful 2d Ball physics with vectors: 2-Dimensional Collisions Without Trigonometry.pdf 2d Ball collision detection example: Adding Collision Detection Success! I have the ball collision detection and response working great! Relevant code: Collision Detection: for (int i = 0; i < ballCount; i++) { for (int j = i + 1; j < ballCount; j++) { if (balls[i].colliding(balls[j])) { balls[i].resolveCollision(balls[j]); } } } This will check for collisions between every ball but skip redundant checks (if you have to check if ball 1 collides with ball 2 then you don't need to check if ball 2 collides with ball 1. Also, it skips checking for collisions with itself). Then, in my ball class I have my colliding() and resolveCollision() methods: public boolean colliding(Ball ball) { float xd = position.getX() - ball.position.getX(); float yd = position.getY() - ball.position.getY(); float sumRadius = getRadius() + ball.getRadius(); float sqrRadius = sumRadius * sumRadius; float distSqr = (xd * xd) + (yd * yd); if (distSqr <= sqrRadius) { return true; } return false; } public void resolveCollision(Ball ball) { // get the mtd Vector2d delta = (position.subtract(ball.position)); float d = delta.getLength(); // minimum translation distance to push balls apart after intersecting Vector2d mtd = delta.multiply(((getRadius() + ball.getRadius())-d)/d); // resolve intersection -- // inverse mass quantities float im1 = 1 / getMass(); float im2 = 1 / ball.getMass(); // push-pull them apart based off their mass position = position.add(mtd.multiply(im1 / (im1 + im2))); ball.position = ball.position.subtract(mtd.multiply(im2 / (im1 + im2))); // impact speed Vector2d v = (this.velocity.subtract(ball.velocity)); float vn = v.dot(mtd.normalize()); // sphere intersecting but moving away from each other already if (vn > 0.0f) return; // collision impulse float i = (-(1.0f + Constants.restitution) * vn) / (im1 + im2); Vector2d impulse = mtd.multiply(i); // change in momentum this.velocity = this.velocity.add(impulse.multiply(im1)); ball.velocity = ball.velocity.subtract(impulse.multiply(im2)); } Source Code: Complete source for ball to ball collider. Binary: Compiled binary in case you just want to try bouncing some balls around. If anyone has some suggestions for how to improve this basic physics simulator let me know! One thing I have yet to add is angular momentum so the balls will roll more realistically. Any other suggestions? Leave a comment!

  Read the article

• BOOST program_options: parsing multiple argument list.

  - by Arman

  Hello, I would like to pass the multiple arguments with positive or negative values. Is it possible to parse it? Currently I have a following initialization: vector<int> IDlist; namespace po = boost::program_options; po::options_description commands("Allowed options"); commands.add_options() ("IDlist",po::value< vector<int> >(&IDlist)->multitoken(), "Which IDs to trace: ex. --IDlist=0 1 200 -2") ("help","print help") ; and I would like to call: ./test_ids.x --IDlist=0 1 200 -2 unknown option -2 So,the program_options assumes that I am passing -2 as an another option. Can I configure the program_options in such a way that it can accept the negative integer values? Thanks Arman.

  Read the article

• Extracting, then passing raw data into another class - How to avoid copying twice while maintaining

  - by Kache4

  Consider a class Book with a stl container of class Page. each Page holds a screenshot, like page10.jpg in raw vector<char> form. A Book is opened with a path to a zip, rar, or directory containing these screenshots, and uses respective methods of extracting the raw data, like ifstream inFile.read(buffer, size);, or unzReadCurrentFile(zipFile, buffer, size). It then calls the Page(const char* stream, int filesize) constructor. Right now, it's clear that the raw data is being copied twice. Once to extract to Book's local buffer and a second time in the Page ctor to the Page::vector<char>. Is there a way to maintain encapsulation while getting rid of the middleman buffer?

  Read the article

< Previous Page | 97 98 99 100 101 102 103 104 105 106 107 108  | Next Page >