Search Results

Search found 4186 results on 168 pages for 'ember router'.

Page 101/168 | < Previous Page | 97 98 99 100 101 102 103 104 105 106 107 108  | Next Page >

• Slow wired internet connection on Realtek RTL8168-8111 (Rev 6)

  - by Mark

  I keep on seeing issues people are having with their wireless. I am having an issue with being wired into my router. I installed Ubuntu 11.10 the other day, on my custom PC. The motherboard I have installed on this PC is an ASUS P8H61-M. The issue I am having is with my speed. I have a dual boot, windows 7 and the new Ubuntu. On my Windows install I am getting test speeds from Speakeasy at 17Mbps and actual downloads around 2-3MB/s. With Ubuntu, I am getting test speeds from Speakeasy at 1.14Mbps and actual downloads around 60KB/s. I have disabled IPv6 and am no using GoogleDNS for my DNS, but it hasn't resolved the issue. I have scanned my router (WRT54GS Linksys) to disable IPv6 connections, and I am not seeing any option for that. I cannot figure out why I am getting such sluggish internet connection. Any help to resolve would be great! I performed an iconfig -a with these results: mark@Mark-ASUS:~$ ifconfig -a eth0 Link encap:Ethernet HWaddr f4:6d:04:d1:2c:4e inet addr:192.168.1.103 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::f66d:4ff:fed1:2c4e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:21888 errors:0 dropped:21888 overruns:0 frame:21888 TX packets:21068 errors:0 dropped:90 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:26348337 (26.3 MB) TX bytes:2217140 (2.2 MB) Interrupt:46 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:7 errors:0 dropped:0 overruns:0 frame:0 TX packets:7 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:952 (952.0 B) TX bytes:952 (952.0 B) My specs are: mark@Mark-ASUS:~$ sudo lspci -nn 04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06) 06:00.0 PCI bridge [0604]: ASMedia Technology Inc. Device [1b21:1080] (rev 01) udev information: KERNEL[11.351405] add /devices/pci0000:00/0000:00:1c.2/0000:04:00.0/net/eth0 (net) UDEV_LOG=3 ACTION=add DEVPATH=/devices/pci0000:00/0000:00:1c.2/0000:04:00.0/net/eth0 SUBSYSTEM=net INTERFACE=eth0 IFINDEX=2 SEQNUM=1542 UDEV [11.363905] add /devices/pci0000:00/0000:00:1c.2/0000:04:00.0/net/eth0 (net) UDEV_LOG=3 ACTION=add DEVPATH=/devices/pci0000:00/0000:00:1c.2/0000:04:00.0/net/eth0 SUBSYSTEM=net INTERFACE=eth0 IFINDEX=2 SEQNUM=1542 ID_VENDOR_FROM_DATABASE=Realtek Semiconductor Co., Ltd. ID_MODEL_FROM_DATABASE=RTL8111/8168B PCI Express Gigabit Ethernet controller ID_BUS=pci ID_VENDOR_ID=0x10ec ID_MODEL_ID=0x8168 ID_MM_CANDIDATE=1 dmesg information: [ 2.855982] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.856366] r8169 0000:04:00.0: eth0: RTL8168b/8111b at 0xffffc9000064c000, f4:6d:04:d1:2c:4e, XID 0c900800 IRQ 46 [ 12.540956] r8169 0000:04:00.0: eth0: link down [ 12.540961] r8169 0000:04:00.0: eth0: link down [ 12.541173] ADDRCONF(NETDEV_UP): eth0: link is not ready I took out a lot of information that did not pertain to eth0, because the previous edits wouldn't save. If I need any more information, let me know. I would love to get this resolved. The other issue I am noticing is sometimes my connection disconnects all together, for about a minute, then it reconnects.

  Read the article

• Obtaining MAC address

  - by rink.attendant.6

  According to Obtain client MAC address in ASP.NET Application, it is not possible. I am not entirely convinced because whenever I connect to Tim Hortons WiFi, my MAC address is known. Occasionally, the network is slow and I see this URL like this before being redirected to the Connect page: http://timhortonswifi.com/cp/tdl3/index.asp ?cmd=login &switchip=172.30.129.73 &mac=60:6c:66:17:1a:83 &ip=10.40.66.229 &essid=Tim%20Hortons%20WiFi &apname=TDL-ON-NEP-02177-WAP1 &apgroup=02177 &url=http%3A%2F%2Fweather%2Egc%2Eca%2Fcity%2Fpages%2Fon-72_metric_e%2Ehtml So according to this URL, the site knows the IP address of the router, my MAC address, the IP address assigned to my device by the router, the network SSID, some other pieces of information, and the URL I was trying to access prior to connecting. There's two options: Tim Hortons WiFi Basic and Tim Hortons WiFi Plus, where the "Plus" option allows me to connect to any Tim Hortons WiFi access point in Canada automatically with this device. Registration requires an email address, so I'm assuming this is possible by checking the MAC address and storing it in a database that routers ping upon connection. More info here. According to the extension of this page, I can safely assume it is ASP. How are they obtaining this information?

  Read the article

• CakePHP Routes: Messing With The MVC

  - by thesunneversets

  So we have a real-estate-related site that has controller/action pairs like "homes/view", "realtors/edit", and so forth. From on high it has been deemed a good idea to refactor the site so that URLS are now in the format "/realtorname/homes/view/id", and perhaps also "/admin/homes/view/id" and/or "/region/..." As a mere CakePHP novice I'm finding it difficult to achieve this in routes.php. I can do the likes of: Router::connect('/:filter/h/:id', array('controller'=>'homes','action'=>'view')); Router::connect('/admin/:controller/:action/:id'); But I'm finding that the id is no longer being passed simply and elegantly to the actions, now that controller and action do not directly follow the domain. Therefore, questions: Is it a stupid idea to play fast and loose with the /controller/action format in this way? Is there a better way of stating these routes so that things don't break egregiously? Would we be better off going back to subdomains (the initial method of achieving this type of functionality, shot down on potentially spurious SEO-related grounds)? Many thanks for any advice! I'm sorry that I'm such a newbie that I don't know whether I'm asking stupid questions or not....

  Read the article

• Creating a RESTful service in CakePHP

  - by NathanGaskin

  I'm attempting to create a RESTful service in CakePHP but I've hit a bit of a brick wall. I've enabled the default RESTful routing using Router::mapResources('users') and Router::parseExtensions(). This works well if I make a GET request, and returns some nicely formatted XML. So far so good. The problem is if I want to make a POST or PUT request. CakePHP doesn't seem to be able to read the data from the request. At the moment my add(), edit() and delete() actions don't contain any logic, they're simply setting $this-data to the view. I'm testing with the following cURL command: curl -v -d "<user><username>blahblah</username><password>blahblah</password>" http://localhost/users.xml --header 'content-type: text/xml' Which only returns a 404 header. If I remove the --header parameter then it returns the view but no data is set. It feels like I'm missing something obvious here. Any ideas?

  Read the article

• Setting up magic routes for plugins in CakePHP 1.3?

  - by Matt Huggins

  I'm working on upgrading my project from CakePHP 1.2 to 1.3. In the process, it seems that the "magic" routing for plugins by which a controller name (e.g.: "ForumsController") matching the plugin name (e.g.: "forums") no longer automatically routes to the root of the plugin URL (e.g.: "www.example.com/forums" pointing to plugin "forums", controller "forums", action "index"). The error message given is as follows: Error: ForumsController could not be found. Error: Create the class ForumsController below in file: app/controllers/forums_controller.php <?php class ForumsController extends AppController { var $name = 'Forums'; } ?> In fact, even if I navigate to "www.example.com/forums/forums" or "www.example.com/forums/forums/index", I get the same exact error. Do I need to explicitly set up routes to every single plugin I use? This seems to destroy a lot of the magic I like about CakePHP. I've only found that doing the following works: Router::connect('/forums/:action/*', array('plugin' => 'forums', 'controller' => 'forums')); Router::connect('/forums', array('plugin' => 'forums', 'controller' => 'forums', 'action' => 'index')); Setting up 2 routes for every single plugin seems like overkill, does it not? Is there a better solution that will cover all my plugins, or at least reduce the number of routes I need to set up for each plugin?

  Read the article

• DELETE causing a redirect loop?

  - by robocode

  I have an express app with a postgres backend where a user can add/delete recipes, and each time they do so they get an updated list of recipes. Adding a recipe is fine, but when I delete one it seems to get stuck in a redirect loop. In app.js I have router.get('/delete/:d', delRec.deleteRecipe); which calls the following code exports.deleteRecipe = function(req, res){ pg.connect(conString, function(err, client) { client.query('DELETE FROM recipes WHERE recipe_name = ', [req.params.d], function(err, result) { if(err) { return console.error('error running query', err); } else if (result) { pg.end(); console.log('deleting'); } }); }); res.redirect('recipes'); }; If I try delete a recipe, console.log('deleting') produces deleting deleting deleting deleting deleting deleting deleting deleting deleting deleting deleting deleting deleting deleting deleting deleting deleting deleting deleting deleting deleting The recipes route is below (sorry that it's so convoluted) router.get('/recipes', function(req, res) { pg.connect(conString, function(err, client) { if(err) { return console.error('could not connect to postgres', err); } client.query('SELECT * FROM recipes', function(err, result) { if(err) { return console.error('error running query', err); } recipes = result.rows; for(var d in recipes) { if (recipes.hasOwnProperty(d)) { recipeList[d] = recipes[d].recipe_name; } } res.render('recipes', {recipes: recipes, recipeList: recipeList}); }); }); });

  Read the article

• How do I send data between two computers over the internet

  - by Johan

  I have been struggling with this for the entire day now, I hope somebody can help me with this. My problem is fairly simple: I wish to transfer data (mostly simple commands) from one PC to another over the internet. I have been able to achieve this using sockets in Java when both computers are connected to my home router. I then connected both computers to the internet using two different mobile phones and attempted to transmit the data again. I used the mobile phones as this provides a direct route to the internet and if I use my router I have to set up port forwarding, at least, that is how I understand it. I think the problem lies in the method that I set up the client socket. I used: Socket kkSocket = new Socket(ipAddress, 3333); where ipAddress is the IP address of the computer running the server. I got the IP address by right-clicking on the connection, status, support. Is that the correct IP address to use or where can I obtain the address of the server? Also, is it possible to get a fixed name for my computer that I can use instead of entering the IP address, as this changes every time I connect to the internet using my mobile phone? Alternatively, are there better methods to solving my problem such as using http, and if so, where can I find more information about this? Thanks!

  Read the article

• Why Backbone.js isn't binding my event

  - by Saif Bechan

  I have a router like this, as main entry point: window.AppRouter = Backbone.Router.extend({ routes: { '': 'login' }, login: function(){ userLoginView = new UserLoginView(); } }); var appRouter = new AppRouter; Backbone.history.start({pushState: true}); I have a model/collection/view like this: window.User = Backbone.Model.extend({}); window.Users = Backbone.Collection.extend({ model: User }); window.UserLoginView = Backbone.View.extend({ events: { 'click #login-button': 'loginAction' }, initialize: function(){ _.bindAll(this, 'render', 'loginAction'); }, loginAction: function(){ var uid = $("#login-username").val(); var pwd = $("#login-password").val(); var user = new User({uid:uid, pwd:pwd}); } }); And body of my HTML looks like this: <form action="#" method="POST" id="login-form"> <p> <label for="login-username">username</label> <input type="text" id="login-username" autofocus /> </p> <p> <label for="login-password">password</label> <input type="password" id="login-password" /> </p> <a id="login-button" href="#">Inloggen</a> </form> Note: The HTML comes from Node.js using express.js, should I maybe wait for a document ready event somewhere? Edit: I have tried this, create the view when ready, did not solve the problem. $(function(){ userLoginView = new UserLoginView(); });

  Read the article

• Benefits of "Don't Fragment" on TCP Packets?

  - by taspeotis

  One of our customers is having trouble submitting data from our application (on their PC) to a server (different geographical location). When sending packets under 1100 bytes everything works fine, but above this we see TCP retransmitting the packet every few seconds and getting no response. The packets we are using for testing are about 1400 bytes (but less than 1472). I can send an ICMP ping to www.google.com that is 1472 bytes and get a response (so it's not their router/first few hops). I found that our application sets the DF flag for these packets, and I believe a router along the way to the server has an MTU less than/equal to 1100 and dropping the packet. This affects 1 client in 5000, but since everybody's routes will be different this is expected. The data is a SOAP envelope and we expect a SOAP response back. I can't justify WHY we do it, the code to do this was written by a previous developer. So... Are there are benefits OR justification to setting the DF flag on TCP packets for application data? I can think of reasons it is needed for network diagnostics applications but not in our situation (we want the data to get to the endpoint, fragmented or not). One of our sysadmins said that it might have something to do with us using SSL, but as far as I know SSL is like a stream and regardless of fragmentation, as long as the stream is rebuilt at the end, there's no problem. If there's no good justification I will be changing the behaviour of our application. Thanks in advance.

  Read the article

• Zend_Router requirements mismatch

  - by elbicho

  Hello you all: I have two routes that match a url with the same apparent pattern, the difference lies in the $actionRoute, this should only be matched if the variable :action on it equals 'myaction'. If I go to /en/mypage/whatever/myaction it goes as expected through $actionRoute. If I go to /en/mypage/whatever/blahblah it gets rejected by $actionRoute and matched by $genRoute. If I go to /en/mypage/whatever it should be matched by $genRoute but it gets matched by $actionRoute instead throwing and exception because the action noactionAction() does not exist. Don't know what I'm doing wrong, I'd appreciate your help. $genRoute = new Zend_Controller_Router_Route( ':lang/mypage/:var1/:var2', array( 'lang' => '', 'module' => 'mymodule', 'controller' => 'index', 'action' => 'index', 'var1' => 'noone', 'var2' => 'no' ), array( 'var1' => '[a-z\-]+?', 'lang' => '(es|en|fr|de){1}' ) ); $actionRoute = new Zend_Controller_Router_Route( ':lang/mypage/:var1/:action', array( 'lang' => '', 'module' => 'mymodule', 'controller' => 'index', 'action' => 'noaction', 'var1' => 'noone', ), array( 'action' => '(myaction)+?', 'var' => '[a-z\-]+?', 'lang' => '(es|en|fr|de){1}', ) ); $router->addRoute('genroute',$genRoute); $router->addRoute('actionroute',$actionRoute);

  Read the article

• Zend_Controller_Router_Route_Chain more routes - more problems

  - by epmspec

  When i use only langRoute and moduleRoute i have not any problems. But when i add pageRoute it is not work properly. I have tried many another ways do it (Regex etc) but none gives the desired result. Can anybody help me? $front = Zend_Controller_Front::getInstance(); $router = $front->getRouter(); //Route_page needs dispatcher and request $dispatcher = $front->getDispatcher(); $request = $front->getRequest(); // Add languag routes $langRoute = new Zend_Controller_Router_Route_Hostname( ':language.domain.com', array( 'language' => 'ru', ), array( 'language' => '^(ru|en)$', ) ); // Add module routes $moduleRoute = new Zend_Controller_Router_Route_Module(array(),$dispatcher,$request); // Add page routes $pageRoute = new Zend_Controller_Router_Route( ':uri\.html', array( 'controller' => 'index', 'module' => 'default', 'action' => 'index', 'uri' => 'index', ), array ('uri' => '[0-9a-z\-]+') ); // Add chain routes $chainedRoute = new Zend_Controller_Router_Route_Chain(); $chainedRoute->chain($pageRoute); $chainedRoute->chain($langRoute)->chain($moduleRoute); $router->addRoute('default', $chainedRoute);

  Read the article

• Receiving UDP on different Android phones gives different results

  - by user1868982

  I am willing to create a server and client program on my android mobile devices. The devices communicate with each other on the same wifi network, therefore, some simple scanning mechanism must be implemented - The client phones search for a server phone through some kind of broadcast. What I did: My protocol - the client phone broadcasts a message port p on the wifi, the server listens on port p. when the server gets the broadcast message it sends a message back, therefore discovering itself to the client. My code - I have opened a broadcast socket on my app, it sends a broadcast message. Meanwhile there is a python script on my PC that listens and replies - I use python so that my testing will be easier - Wireshark on the PC and I can see everything. What happens: When I use one of my Galaxy S phones - it works and I get a response. When I use the other Galaxy S phone - it doesn't work. Now this is what I know: The phone that works actually has Nexus ROM on it Ver. 4.1.1 The phone that doesn't work has 2.3.3 regular galaxy ROM The python code says it receives both of the broadcasts sent from both phones, and replies to both of them without raising any exception. So far I was thought the problem may be 1. the older version'd phone. 2. the windows firewall 3. the router firewall So I have opened Wireshark, and Indeed I saw that both phones are sending their broadcasts - it was logged on Wireshark. But the python script only responded to the first one. So this is why 1 & 3 are irrelevant - if the router firewall was blocking my UDP I would have still seen the python server response, same with the older versioned phone. To get rid of 2 i just disabled the windows firewall - still same problem. Does anyone has a clue to why this effect might happen? Thanks!

  Read the article

• Protected object this object on the rompager server is protected

  - by Sami-L

  I have a windows home server, when I connect to any web site in it I get an authentication window with the next message: "http://mydomain.com site requires user name and password, the site says: "SmartAX". Then when I close the window I get an error page saying: Protected object this object on the rompager server is protected Could you please have an idea on this, have it relation with ADSL router ?

  Read the article

• SSL handshake failed SVN Checkout

  - by Webnet

  I'm using https://IP:PORT/svn/web/repository to checkout remotely from our network here at the office and I'm getting the error... SSL handshake failed: SSL error: unknown protocol My concern is that I've verified that SSL is running and listening on the port I'm specifying. Now.... the port I've specified is forwarded through the office router to the SVN server. Any ideas on what could be going wrong?

  Read the article

• Looking for home networking hardware and software advice

  - by phobos7

  Note: I originally wrote this up in a blog post. I've removed any affiliate links that I put in my original post to ensure I don't annoy anybody. I've recently moved home and I now need to go to the trouble of sorting out my home network yet again. We had Virgin broadband in Hertford but you can't get Virgin in the street we've moved to so I've had to go with O2 Broadband. Normally I prefer to use my own hardward, and previously used the DLink DIR-655 router which was great, but in this situation I am using the O2 Wirelss Box III since I only have an old Netgear DG834PN Wireless G modem router and I'd rather be using Wireless N. Anyway, the place we have moved into has only one phone point in the hallway, has the best TV point in one room and the best place to put the TV and other entertainment stuff in yet another room. So, networking the house up for Internet and TV is required. The diagram below shows the things that I'll have in my home network but there are three points where I'm not quite sure what hardware to us. Wireless Access Point/Bridge, that acts only as a wireless to wire bridge and not an AP, that links up a Media Centre/PC and a couple of consoles to the network. I'm pretty much settled on us an Acer Aspire Revo R3600 as my media PC, probably with Ubuntu or Windows and XBMC installed. Wireless Access Point/Bridge, that acts only as a wireless to wire bridge and not an AP, that links up a device that can decode and stream TV from a TV aerial across the network. The device that is connected to 2). At the moment I'm considering a HDHomeRun by SiliconDust. At the moment I'm considering either the TP LINK TL-WA701ND 150Mbps Wireless Lite N Access Point (very cheap at Amazon) or the Netgear 5 GHz Wireless-N HD Access Point/Bridge. I'd love to get some insight into what you would do in my situation. What Wireless Access Point/Bridge should I put at points 1) and 2)? What device should I choose for point 3) that can decode and stream a TV signal? Is the Acer Aspire Revo R3600 a good choice? ![alt text][6] Note 2: I've also posted this question on AVForums.

  Read the article

• SSL handshake failed

  - by Webnet

  I'm using https://IP:PORT/svn/web/repository to checkout remotely from our network here at the office and I'm getting the error... SSL handshake failed: SSL error: unknown protocol My concern is that I've verified that SSL is running and listening on the port I'm specifying. Now.... the port I've specified is forwarded through the office router to the SVN server. Any ideas on what could be going wrong?

  Read the article

• How to setup a static multicast ARP entry with Cisco SG300?

  - by Fredrik Hedberg

  We're running a Microsoft NLB cluster in multicast mode as a loadbalancer. Using our old Cisco IOS switches we propagate access to the cluster to our branches using a static ARP entry in the core router: arp 10.20.1.226 03bf.0a14.01e2 ARPA But how does one solve this using non-IOS based Cisco hardware such as the SG300 series? Adding a static ARP entry results in an error message telling the user that the hardware address needs to be a valid unicast MAC address.

  Read the article

• How to put the wamp server online?

  - by srisar

  hay i have setup the wamp server so now im ready to put it online. but when i put it online and also forward the port 80, now when i point the browser to the wan address of mine, it showing my router's home page???!!!! i dont know how to slove it

  Read the article

• Cisco 800 series won't forward port

  - by sam

  Hello ServerFault, I am trying to forward port 444 from my cisco router to my Web Server (192.168.0.2). As far as I can tell, my port forwarding is configured correctly, yet no traffic will pass through on port 444. Here is my config: ! version 12.3 service config no service pad service tcp-keepalives-in service tcp-keepalives-out service timestamps debug uptime service timestamps log uptime service password-encryption no service dhcp ! hostname QUESTMOUNT ! logging buffered 16386 informational logging rate-limit 100 except warnings no logging console no logging monitor enable secret 5 -removed- ! username administrator secret 5 -removed- username manager secret 5 -removed- clock timezone NZST 12 clock summer-time NZDT recurring 1 Sun Oct 2:00 3 Sun Mar 3:00 aaa new-model ! ! aaa authentication login default local aaa authentication login userlist local aaa authentication ppp default local aaa authorization network grouplist local aaa session-id common ip subnet-zero no ip source-route no ip domain lookup ip domain name quest.local ! ! no ip bootp server ip inspect name firewall tcp ip inspect name firewall udp ip inspect name firewall cuseeme ip inspect name firewall h323 ip inspect name firewall rcmd ip inspect name firewall realaudio ip inspect name firewall streamworks ip inspect name firewall vdolive ip inspect name firewall sqlnet ip inspect name firewall tftp ip inspect name firewall ftp ip inspect name firewall icmp ip inspect name firewall sip ip inspect name firewall fragment maximum 256 timeout 1 ip inspect name firewall netshow ip inspect name firewall rtsp ip inspect name firewall skinny ip inspect name firewall http ip audit notify log ip audit po max-events 100 ip audit name intrusion info list 3 action alarm ip audit name intrusion attack list 3 action alarm drop reset no ftp-server write-enable ! ! ! ! crypto isakmp policy 1 authentication pre-share ! crypto isakmp policy 2 encr 3des authentication pre-share group 2 ! crypto isakmp client configuration group staff key 0 qS;,sc:q<skro1^, domain quest.local pool vpnclients acl 106 ! ! crypto ipsec transform-set tr-null-sha esp-null esp-sha-hmac crypto ipsec transform-set tr-des-md5 esp-des esp-md5-hmac crypto ipsec transform-set tr-des-sha esp-des esp-sha-hmac crypto ipsec transform-set tr-3des-sha esp-3des esp-sha-hmac ! crypto dynamic-map vpnusers 1 description Client to Site VPN Users set transform-set tr-des-md5 ! ! crypto map cm-cryptomap client authentication list userlist crypto map cm-cryptomap isakmp authorization list grouplist crypto map cm-cryptomap client configuration address respond crypto map cm-cryptomap 65000 ipsec-isakmp dynamic vpnusers ! ! ! ! interface Ethernet0 ip address 192.168.0.254 255.255.255.0 ip access-group 102 in ip nat inside hold-queue 100 out ! interface ATM0 no ip address no atm ilmi-keepalive dsl operating-mode auto ! interface ATM0.1 point-to-point pvc 0/100 encapsulation aal5mux ppp dialer dialer pool-member 1 ! ! interface Dialer0 bandwidth 640 ip address negotiated ip access-group 101 in no ip redirects no ip unreachables ip nat outside ip inspect firewall out ip audit intrusion in encapsulation ppp no ip route-cache no ip mroute-cache dialer pool 1 dialer-group 1 no cdp enable ppp pap sent-username -removed- password 7 -removed- ppp ipcp dns request crypto map cm-cryptomap ! ip local pool vpnclients 192.168.99.1 192.168.99.254 ip nat inside source list 105 interface Dialer0 overload ip nat inside source static tcp 192.168.0.2 444 interface Dialer0 444 ip nat inside source static tcp 192.168.0.51 9000 interface Dialer0 9000 ip nat inside source static udp 192.168.0.2 1433 interface Dialer0 1433 ip nat inside source static tcp 192.168.0.2 1433 interface Dialer0 1433 ip nat inside source static tcp 192.168.0.2 25 interface Dialer0 25 ip classless ip route 0.0.0.0 0.0.0.0 Dialer0 ip http server no ip http secure-server ! ip access-list logging interval 10 logging 192.168.0.2 access-list 1 remark The local LAN. access-list 1 permit 192.168.0.0 0.0.0.255 access-list 2 permit 192.168.0.0 access-list 2 remark Where management can be done from. access-list 2 permit 192.168.0.0 0.0.0.255 access-list 3 remark Traffic not to check for intrustion detection. access-list 3 deny 192.168.99.0 0.0.0.255 access-list 3 permit any access-list 101 remark Traffic allowed to enter the router from the Internet access-list 101 permit ip 192.168.99.0 0.0.0.255 192.168.0.0 0.0.0.255 access-list 101 deny ip 0.0.0.0 0.255.255.255 any access-list 101 deny ip 10.0.0.0 0.255.255.255 any access-list 101 deny ip 127.0.0.0 0.255.255.255 any access-list 101 deny ip 169.254.0.0 0.0.255.255 any access-list 101 deny ip 172.16.0.0 0.15.255.255 any access-list 101 deny ip 192.0.2.0 0.0.0.255 any access-list 101 deny ip 192.168.0.0 0.0.255.255 any access-list 101 deny ip 198.18.0.0 0.1.255.255 any access-list 101 deny ip 224.0.0.0 0.15.255.255 any access-list 101 deny ip any host 255.255.255.255 access-list 101 permit tcp 67.228.209.128 0.0.0.15 any eq 1433 access-list 101 permit tcp host 120.136.2.22 any eq 1433 access-list 101 permit tcp host 123.100.90.58 any eq 1433 access-list 101 permit udp 67.228.209.128 0.0.0.15 any eq 1433 access-list 101 permit udp host 120.136.2.22 any eq 1433 access-list 101 permit udp host 123.100.90.58 any eq 1433 access-list 101 permit tcp any any eq 444 access-list 101 permit tcp any any eq 9000 access-list 101 permit tcp any any eq smtp access-list 101 permit udp any any eq non500-isakmp access-list 101 permit udp any any eq isakmp access-list 101 permit esp any any access-list 101 permit tcp any any eq 1723 access-list 101 permit gre any any access-list 101 permit tcp any any eq 22 access-list 101 permit tcp any any eq telnet access-list 102 remark Traffic allowed to enter the router from the Ethernet access-list 102 permit ip any host 192.168.0.254 access-list 102 deny ip any host 192.168.0.255 access-list 102 deny udp any any eq tftp log access-list 102 permit ip 192.168.0.0 0.0.0.255 192.168.99.0 0.0.0.255 access-list 102 deny ip any 0.0.0.0 0.255.255.255 log access-list 102 deny ip any 10.0.0.0 0.255.255.255 log access-list 102 deny ip any 127.0.0.0 0.255.255.255 log access-list 102 deny ip any 169.254.0.0 0.0.255.255 log access-list 102 deny ip any 172.16.0.0 0.15.255.255 log access-list 102 deny ip any 192.0.2.0 0.0.0.255 log access-list 102 deny ip any 192.168.0.0 0.0.255.255 log access-list 102 deny ip any 198.18.0.0 0.1.255.255 log access-list 102 deny udp any any eq 135 log access-list 102 deny tcp any any eq 135 log access-list 102 deny udp any any eq netbios-ns log access-list 102 deny udp any any eq netbios-dgm log access-list 102 deny tcp any any eq 445 log access-list 102 permit ip 192.168.0.0 0.0.0.255 any access-list 102 permit ip any host 255.255.255.255 access-list 102 deny ip any any log access-list 105 remark Traffic to NAT access-list 105 deny ip 192.168.0.0 0.0.0.255 192.168.99.0 0.0.0.255 access-list 105 permit ip 192.168.0.0 0.0.0.255 any access-list 106 remark User to Site VPN Clients access-list 106 permit ip 192.168.0.0 0.0.0.255 any dialer-list 1 protocol ip permit ! line con 0 no modem enable line aux 0 line vty 0 4 access-class 2 in transport input telnet ssh transport output none ! scheduler max-task-time 5000 ! end any ideas? :)

  Read the article

• My Ip Address - Windows Vista - ipconfig : Cant find my ip address

  - by meyosef

  Hi, I type in doc $ ipconfig but not get My Ip Address. I get other values but not my ip address. Please help me, Thanks Yosef My Computer: Windows Vista adsl router (for few computers) My Ip is temp each time that i connect web he change

  Read the article

• Is it possible to have the D-Link DIR-628 run in wireless bridge mode?

  - by Matt R

  Short of installing 3rd party software, does the D-Link DIR-628 run in bridged wireless? I'm trying to have the dlink hook up to an existing linksys wireless router to add more range/get stronger signal.

  Read the article

• Apple Airport Extreme and PS3/PSP remote play

  - by user5699

  I have not been able to get remote play over internet working through my AEBS. I have fiddled around with countless settings and also tried to telnet into the router, to no avail. The setup works fine inside the netowrk (I can remotely turn on my PS3 wirelessly using my PSP). However, outside the home network I cannot get it to work. Any help would be most appreciated.

  Read the article

• configure squid with windows 2008

  - by G.a.r.y.

  Hi my problem is this: I have a 3 pc (192.168.1.2,..3,..4) and a windows 2008 server (192.168.1.100) router is 192.168.1.1. I just want that the 3 pc set like gateway 192.168.1.100, are filter by squid proxy loaded in win2008 so in win2008 I 've set in control panel the proxy 192.168.1.100:3128 and in win2008 browser work, the connection is filtered by proxy, but in 3 pc not works, so maybe I should route all incoming request into squid, but I dunno how ... thanks

  Read the article

• Trouble connecting a Ubuntu system to IPv6 tunnel over NAT

  - by John Millikin

  I'm trying to set up an IPv6 tunnel, via Hurricane Electric's tunnel-broker service. I've configured my system using their example commands: # $ipv4a = tunnel server's IPv4 IP # $ipv4b = user's IPv4 IP # $ipv6a = tunnel server's side of point-to-point /64 allocation # $ipv6b = user's side of point-to-point /64 allocation ip tunnel add he-ipv6 mode sit remote $ipv4a local $ipv4b ttl 255 ip link set he-ipv6 up ip addr add $ipv6b dev he-ipv6 ip route add ::/0 dev he-ipv6 And have configured my desktop to be in my NAT router's DMZ. The router is running Tomato firmware. But I can't ping any IPv6 services: $ ping6 -I he-ipv6 '2001:470:1f04:454::1' PING 2001:470:1f04:454::1(2001:470:1f04:454::1) from 2001:470:1f04:454::2 he-ipv6: 56 data bytes From 2001:470:1f04:454::2 icmp_seq=1 Destination unreachable: Address unreachable From 2001:470:1f04:454::2 icmp_seq=2 Destination unreachable: Address unreachable I can ping my local address: $ ping6 -I he-ipv6 '2001:470:1f04:454::2' PING 2001:470:1f04:454::2(2001:470:1f04:454::2) from 2001:470:1f04:454::2 he-ipv6: 56 data bytes 64 bytes from 2001:470:1f04:454::2: icmp_seq=1 ttl=64 time=0.037 ms 64 bytes from 2001:470:1f04:454::2: icmp_seq=2 ttl=64 time=0.039 ms I don't know much about routing, but results I found online suggested the output of ip -6 route and ip addr could be useful: $ ip -6 route 2001:470:1f04:454::/64 via :: dev he-ipv6 proto kernel metric 256 mtu 1480 advmss 1420 hoplimit 4294967295 fe80::/64 dev virbr0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev eth1 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 via :: dev he-ipv6 proto kernel metric 256 mtu 1480 advmss 1420 hoplimit 4294967295 default dev he-ipv6 metric 1024 mtu 1480 advmss 1420 hoplimit 4294967295 $ ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 100 link/ether 00:1c:c0:a1:98:b2 brd ff:ff:ff:ff:ff:ff inet 192.168.1.10/24 brd 192.168.1.255 scope global eth1 inet6 fe80::21c:c0ff:fea1:98b2/64 scope link valid_lft forever preferred_lft forever 3: virbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN link/ether 36:4c:33:ab:0d:c6 brd ff:ff:ff:ff:ff:ff inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0 inet6 fe80::344c:33ff:feab:dc6/64 scope link valid_lft forever preferred_lft forever 4: vboxnet0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000 link/ether 00:76:62:6e:65:74 brd ff:ff:ff:ff:ff:ff 5: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 7e:29:5e:7c:ba:93 brd ff:ff:ff:ff:ff:ff 6: sit0: <NOARP> mtu 1480 qdisc noop state DOWN link/sit 0.0.0.0 brd 0.0.0.0 7: he-ipv6@NONE: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1480 qdisc noqueue state UNKNOWN link/sit 24.130.225.239 peer 72.52.104.74 inet6 2001:470:1f04:454::2/64 scope global valid_lft forever preferred_lft forever inet6 fe80::1882:e1ef/128 scope link valid_lft forever preferred_lft forever

  Read the article

• Ubuntu Belkin G Wireless connecting problems

  - by Mark Szymanski

  Hi, I am on Ubuntu 9.10 Karmic and have a Belkin G Wireless router with WPA2 Personal security and when I try to connect to it it just keeps prompting for the password over and over. Thanks in advance.

  Read the article

< Previous Page | 97 98 99 100 101 102 103 104 105 106 107 108  | Next Page >