Search Results

Search found 18556 results on 743 pages for 'facebook connect'.

Page 101/743 | < Previous Page | 97 98 99 100 101 102 103 104 105 106 107 108  | Next Page >

• Can't connect to a machine via Cisco VPN on Mac

  - by Alex

  Hi there, I have a curious problem. I can connect to work's vpn using Cisco VPN Client. I can get internet through that vpn. When I go check the IP online it tells me the IP address of the server I connected. However, when I try to ping one of the machines at work I get nothing. And traceroute says there is no route to the destination. But works for google. Any ideas? Is some traffic not sent through the VPN on mac Alex

  Read the article

• Can't connect to wireless router anymore due to data rate problem

  - by Jay White

  I was playing around with my wireless router, and switched the mode to a fixed mode B. Now< I can no longer assoicate to the AP. Windows does not give any particular error message, but with wireshark I see that the returned error is that the client does not support the necessary data rate. My wireless card is type n, and it is set to mode a/b/g compatible. I tried setting ot to just b, however this made no difference. How can I set the data rate of my card so that I can connect again to my AP? I would prefer not to just reset the device, as there has been some configuration done that would be a pain to redo, and as well I do not have the ISP password handy. Regardless I would like to understand this situation better.

  Read the article

• Linux Mint Wireless doesn't connect [migrated]

  - by guisantogui

  I'm having a great problem, I've installed Linux mint debian edition (LMDE), and following this tutorial http://community.linuxmint.com/tutorial/view/161 I did installed the network driver. The available connections appears to me, but when i try to connect to my connection at first time, I got this message: "(4) Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken." And the following tries, I got this another message: "(32) Insufficient privileges." I'm accepting ideas. Thanks.

  Read the article

• VM can't connect to outside in bridged mode

  - by Kamal

  I am not able to ping any machine(not even the host) from Guest VM in bridged mode. But I got an IP which is on the same subnet as host. I can ping my guest VM from the host and can use ssh to connect to the guest. I am using Vmware workstation 6.5. Guest VM is a centos VM and host is windows xp. Every thing works fine in NAT mode. Any clues as to what could be happening. I tried disabling all the firewalls I have.

  Read the article

• Not able to connect to a mac client from a windows machine

  - by Manish

  I have a Server.exe file which I use to connect to a mac.(I am fairly confident that server.exe is not buggy ).When i try to do this I get this often cited error "No connection could be made because the target machine actively refused it " I did search some existing questions about this on the forum and it looked like this might be a firewall issue.FWIW I dont have any firewall set on my mac (client) and on my server machine (Windows 7 64 bit ) under the firewall settings I have :- Incoming connections : Block all connections to programs that are not on the list of allowed programs. Active Domain Networks: Same domain as the one which my client is on. Windows Firewire State: Off. Do you think i need to change something here?Can someone help me with next steps?

  Read the article

• Unable to connect SQL Server instance from Visual Studio 2008 SP1 on Vista x64

  - by Shimmy

  Hi folks! I installed on a Vista x64 machine Visual Studio 2008 SP1 (with integrated SQL from the installation package) and when I try to add an MDF file to a project or to the App_Data when working with web, I get the following message: Connections to SQL Server Files (*.mdf) require SQL Server Express 2005 to function properly. Please verify the installation of the component or download from the URl: http:go.microsoft.com/fwlink/?linkID=49251. Just to make sure: SQL 2005 express is installed and I connect to it via SSMS. Update: I am 90% sure that this is a Microsoft bug with x64 machines.

  Read the article

• Connect to SVN repository with Netbeans using SVN+SSH

  - by shuby_rocks

  Hello all, I am trying to connect to a SVN server in order to import my project into it with svn+ssh authentication method. I am using the NetBeans IDE (6.8) with subversion plugin installed on Windows XP SP2. I have plink installed with its path set in the Windows PATH env variable. When I use the similar looking repository URL (XXXX and YYYY replaced with sensible things) svn+ssh://XXXX@YYYY/home/dce/svn/trunk along with this external tunnel command plink -l <myUserName> -i C:\\privateKey.ppk I keep getting this error: org.tigris.subversion.javahl.ClientException: Network connection closed unexpectedly I searched about it on the Internet and tried many things but didn't work out. Please help if anybody has some idea what may be going wrong. Thanks a lot in advance.

  Read the article

• unable to connect gmail and hotmail via telnet

  - by codeomnitrix

  Hey all i am try to connect to gmail and hotmail server via telnet. As: $: telnet smtp.gmail.com 25 Trying 74.125.127.109... Connected to gmail-smtp-msa.l.google.com. Escape character is '^]'. 220 mx.google.com ESMTP j3sm3044317ybe.11 helo 250 mx.google.com at your service 220 2.0.0 Ready to start TLS mail from: [email protected] Connection closed by foreign host. Here codeomnitrix is a user of smtp.localhost.com. And i am running postfix at my system with sitename being smtp.localhost.com. And i am able to sent mail locally from one user to another user but can't send to any other user who is not local. Thanks in advance:)

  Read the article

• Using Squid on Debian, Cannot Connect Error

  - by Zed Said

  I am trying to set up Squid on Debian and am getting a connection refused error: squidclient http://www.apple.com/ > test client: ERROR: Cannot connect to 127.0.0.1:3128: Connection refused Here is my config: visible_hostname none cache_effective_user proxy cache_effective_group proxy cache_dir ufs /var/spool/squid 2048 16 256 cache_mem 512 MB cache_access_log /var/log/squid/access.log emulate_httpd_log on strip_query_terms off read_ahead_gap 128 Kb collapsed_forwarding on refresh_stale_hit 30 seconds retry_on_error on maximum_object_size_in_memory 1 MB acl all src 0.0.0.0/0.0.0.0 acl purgehosts src 127.0.0.1/255.255.255.255 # Caching static objects in __data is important. # Without that, apache processes sit around spooling static objects. acl QUERY urlpath_regex /cgi-bin/ /_edit /_admin /_login /_nocache /_recache /__lib /__fudge acl PURGE method PURGE acl POST method POST cache deny QUERY cache deny POST http_access allow PURGE purgehosts http_access deny PURGE http_access allow all http_port 127.0.0.1:80 http_port 50.56.206.139:80 cache_peer 127.0.0.1 parent 80 0 originserver no-query no-digest default redirect_rewrites_host_header off read_ahead_gap 128 Kb shutdown_lifetime 5 seconds Any ideas why this is happening? What have I missed?

  Read the article

• Unable to connect to the Report Server

  - by pghcpa

  Win/7 Professional SQL Server 2008 R2 Express Reporting Services Configuration Manager When I launch it, shows correct Server Name, but report server instance is blank. When I press FIND I get: "Unable to connect to the Report Server " This is my development workstation, so no IIS installed. Seems to work fine on XP. SSMS works fine - no issues. I tried uninstalling SQL Server completely, rebooting, reinstalling a fresh download. Same result. I've googled every article I can find - nothing. Can anyone point me in the right direction in case you've come across this yourself? Thanks.

  Read the article

• Linux clients and Windows Servers can connect but not windows clients

  - by Mustafa Ismail Mustafa

  This is driving me insane because I can't make head or tails of it. We have two DCs (W2K3 SP1) and I'v tried this once on each machine as a sanity check. DHCP is being served by either one of the machines and all machines get an address no problem. The servers can connect/ping/browse to the www and so can all our linux clients. But NONE of our windows clients (all windows 7). I can do anything within the network, I can even ping the firewall/router but nothing from the windows clients is leaving the confines of our subnet. I don't get it. The linux and windows clients are both served from the same DHCP server, the gateway is the same, everything is the same. Anyone care to take a shot at how to resolve this? I tried adding explicit routes at the clients, but still no go. TIA SMIM

  Read the article

• Windows 7 can't connect to via ethernet to Airpot Extreme

  - by Mr AJL

  I have an Airport Extreme, and everything works beautifully on the Mac, but my Windows 7 computer, which is connected via a regular ethernet cable, can't see any network. The Windows computer says there's no cable connected. Any ideas? Is there some kind of setting you have to enable with the Airport utility? I looked everywhere but can't find anything. Or do I need to install that Airport utility something on the PC just to connect to the router? (Haven't tried because the PC has no CD drive)

  Read the article

• Can't connect to Windows Server 2008 shared folders via VPN connection

  - by Pearl

  I set up an VPN connection on my 2008 server using RRAS. The VPN seems to work fine. I can connect from outside the network. I am also able to establish a remote access connection via the VPN-IP. However, I can't access my shared folders. After connecting to the VPN I can ping the server, but it is not shown in my networks. using \ip or \server-name doesn't work either, cannot be found. I checked ipconfig and this is what I found regarding the VPN: DNS-Suffix: Description: test Physical Adress: DHCP activated: No Auto-Config: Yes IPv4-Adress: 192.168.2.114 Sub: 255.255.255.255 Standard-gateway: DNS-Server: 192.168.0.1 NetBIOS: activated To clarify my IP-situation: server is connected to router with 192.168.0.x, the test-client is in an external network connected to a router with 192.168.1.x, server-client connection is using static ips with 192.168.2.x Can anyone help me with this one? The VPN should be ok since I am able to establish remote access.

  Read the article

• MySQL: creating a user that can connect from multiple hosts

  - by DrStalker

  I'm using MySQL and I need to create an account that can connect from either the localhost of from another server, 10.1.1.1. So I am doing: CREATE USER 'bob'@'localhost' IDENTIFIED BY 'password123'; CREATE USER 'bob'@'10.1.1.1 IDENTIFIED BY 'password123'; GRANT SELECT, INSERT, UPDATE, DELETE on MyDatabse.* to 'bob'@'localhost', 'bob'@'10.1.1.1; This works fine, but is there any more elegant way to create a user account that is linked to multiple IPs or does it need to be done this way? My main worry is that in the future permissions will be updated form 'bob' account and not the other.

  Read the article

• Connect two subnets without router

  - by Shcheklein

  I got two Comcast routers with two different subnets on each. Every subnet contains 5 static IPs. Two questions: Are there any problems if both routers and machines from both subnets are connected into one switch? Security issues doesn't matter there. I need to know if there are some performance or other problems. Is it possible to make machines from different subnets to see each other if they all are connected into one switch? Some static routing, add ARP records or somethig else ... I just want to avoid configuring second ethernet adaptors, third router or something. And I need to connect these subnets vai high-speed local network.

  Read the article

• Rails: Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock'

  - by misbehavens

  So I've got a Ruby on Rails application that I am trying to run (in development) on Snow Leopard. I've got it working on my Ubuntu computer, but now I need to get my Snow Leopard environment set up. Originally, I installed the MySQL 2.8.1 Ruby Gem and was running into this issue: uninitialized constant MysqlCompat::MysqlRes But thanks to this tutorial I was able to resolve it by running this command and installing a previous version of the Gem: export ARCHFLAGS="-arch i386 -arch x86_64" ;sudo gem install --no-rdoc --no-ri -v=2.7 mysql -- --with-mysql-dir=/usr/local/mysql --with-mysql-config=/usr/local/mysql/bin/mysql_config Now that I've resolved that issue, I'm running into a different error: Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' This happens when I try to run rake db:migrate as well as when the server is running. How can I resolve this issue?

  Read the article

• Connect to SVN repository with Netbeans using SVN+SSH

  - by shuby_rocks

  I am trying to connect to a SVN server in order to import my project into it with svn+ssh authentication method. I am using the NetBeans IDE (6.8) with subversion plugin installed on Windows XP SP2. I have plink installed with its path set in the Windows PATH env variable. When I use the similar looking repository URL (XXXX and YYYY replaced with sensible things) svn+ssh://XXXX@YYYY/home/dce/svn/trunk along with this external tunnel command plink -l <myUserName> -i C:\\privateKey.ppk I keep getting this error: org.tigris.subversion.javahl.ClientException: Network connection closed unexpectedly I searched about it on the Internet and tried many things but didn't work out. Please help if anybody has some idea what may be going wrong. Thanks a lot in advance.

  Read the article

• Yet another "can't connect to MySQL over the network" question - but i seriously tried everything

  - by mireille raad

  Hello, I was left with the easy task of installing moodle. I am VPNing to 2 servers, one for the database and the other apache/php server 1 must connect over LAN to the mySQL db on server 2 I added a user with following priveleges : +---------------+------------+ | host | user | +---------------+------------+ | % | mir | | 10.10.40.15 | mir | | x.x.x.x | mir | | localhost | mir | Disabled firewall temporary made sure that my username/password combinations are correct, flushed priveleges, restarted mysqld i wnt to /etc/my.cnf .. if i try to add the port=3306 bind-address=10.10.40.15 or anything that is different from 0.0.0.0 or 127.0.0.1 - mysql wouldn't restart i read and tried many forums and pages and asked friends for tips but nothing works So my question to you : are there any networking extensions that need to be installed for mysql, how do i know nothing is missing from the installation any troubleshooting tips, any idea how to fix this, any step by step check list, am i missing something simple/stupid, please anything that comes to mind, let me know Appreciate your feedback on this friday night stuck at work :P

  Read the article

• Connect a 2.5" (laptop hard disk) SATA hard disk to Desktop PC

  - by Lawliet

  Can I connect a laptop SATA hard disk to Desktop PC? Do I have to use some adapters or I can just plug in SATA power connector and SATA data cable like my Desktop hard disk is connected? I noticed that both laptop and desktop SATA disks use same connectors, but I'm afraid that I might fry my laptop hard disk because the SATA connector has both 12V and 5V voltage (given the fact that laptop hard disks has input voltage of 5V) I bought a all-in-one Modex-to-SATA power adapter and SATA cable and I still don't know what to do. I have read various forums and a lot of people are stating that it's perfectly ok, but some are scaring me that by connecting it so, it fried their hard disk. And some also mentioned cutting the yellow 12V wire if I'm planning to use Modex-to-SATA power. Thanks in advance

  Read the article

• Connect a 2.5" (laptop hard disk) SATA hard disk to Desktop PC

  - by Lawliet

  Can I connect a laptop SATA hard disk to Desktop PC? Do I have to use some adapters or I can just plug in SATA power connector and SATA data cable like my Desktop hard disk is connected? I noticed that both laptop and desktop SATA disks use same connectors, but I'm afraid that I might fry my laptop hard disk because the SATA connector has both 12V and 5V voltage (given the fact that laptop hard disks has input voltage of 5V) I bought a all-in-one Modex-to-SATA power adapter and SATA cable and I still don't know what to do. I have read various forums and a lot of people are stating that it's perfectly ok, but some are scaring me that by connecting it so, it fried their hard disk. And some also mentioned cutting the yellow 12V wire if I'm planning to use Modex-to-SATA power. Thanks in advance

  Read the article

• Connect three computers (including one laptop) to one monitor

  - by Jesse Beder

  I have the following hardware: 2 Desktop PCs, running Windows XP and Ubuntu Macbook Pro a LCD monitor, a wired keyboard, and a wired mouse Currently, I'm using an oldish IOGear KVM switch to connect the two PCs to the input/output (and it works very well). I'd like a setup that includes the laptop as well, ideally maintaining as much portability as possible (meaning I'd like to be able to sit down, easily plug in my laptop, work on all computers, then easily pick up and leave with the laptop - is docking station the right word here?). What hardware do I need to do this?

  Read the article

• Problem to connect to MySQL server (error #2002) in PHP

  - by Martin

  I installed ZWAMP 1.0.7 (on Windows 7), but I'm having a weird problem. I can't connect to my MySQL server from any PHP script. If I try to use MySQL command line everything works fine but PHPMyAdmin retruns error #2002. I'm not sure whether it's important or not but MySQL server is not able to create socket file. I don't know what's the problem but I think everything is configured in my.cnf properly. Do you have any ideas?

  Read the article

• Can't connect to exchange thru my smart phone

  - by Hoorayo

  We just moved Exchange server from our company to Local data center. Everything is working except mobile access. There is no problem with receiving and sending email from outlook of my laptop, but I can’t connect to exchange server from my smart phone to receive email. While I am setting up exchange account for my phone(Google) , it recognizes when I put wrong password. But it says “Unable to open connection to server” with right password and ID. Is there any option for IP address for this service when I move my server to different location? Please, help me out for any clue.

  Read the article

• Connect to MS Sql 2008 on local VM

  - by Campo

  I have a test machine. Server 2008 with Hyper V MSSQL 2008 Enterprise Lets call it MACHINE A on the VM it is as well Server 2008 with another MSSQL 2008 Ent Call it VM B I setup a DB on MACHINE A then backed it up and restored following the prepare database for mirroring instructions on MSDN onto VM B. I used to be able to connect to the VM B Instance from the main test server (MACHINE A) but now I cannot for some reason. It cannot seem to find the instance at all even when I browse network databases. I can ping the VM from any computer on the network and access its shares so I know it is discoverable. Just the end of a long day maybe I am missing something here.

  Read the article

• TeamViewer cannot connect

  - by Cetin Sert

  Last week I decided to use TeamViewer VPN to administer software on a server behind a firewall using RemoteDesktop. It was easy to configure to start-up with the system and make VPN available on the other side but now it fails to connect at the step shown below: The remote machine is running Windows Server 2008 R2. Is there a native way to circumvent the external firewall using a server role or feature to make Windows Server do the VPN work? Do people have better / more reliable experiences with other products such as Hamachi? The requirements are as follows: Start at remote system start-up time Make VPN connections to the remote machine possible

  Read the article

< Previous Page | 97 98 99 100 101 102 103 104 105 106 107 108  | Next Page >