Search Results

Search found 9398 results on 376 pages for 'matt dev'.

Page 101/376 | < Previous Page | 97 98 99 100 101 102 103 104 105 106 107 108  | Next Page >

• grub crc error after decompressing linux

  - by w00t

  Hi, I have a debian with a raid1 on it. Both HDDs have bootable flags and grub setup in MBR. If I only start up with sda, linux boots. If I only start up with sdb, grub shows up and says Decompressing Linux... crc error -- System halted I have reinstalled grub a few times now but still nothing. It goes like this: /dev/md0 contains /dev/sda1 /dev/sdb1 find /boot/grub/stage1 shows (hd0,1) (hd0,1) The line that boots Linux shows: root (hd0,0) kernel /vmlinuz-2.6.26-1-686 initrd /initrd.img-2.6.26-1-686 This kind of renders my "redundant" array useless. Any clues? update: just to mention, these are 2 different HDDs, sda is 320gb and sdb is 400gb. Both are WD and both have exactly the same partitions, cloned using sfdisk.

  Read the article

• CentOS package not available

  - by Bastien974

  I installed a CentOS 5.5 and the default php package is 5.1.6. I want to install 5.2.9, so I added /etc/yum.repo.d/CentOS-Testing.repo [c5-testing] name=CentOS-5 Testing baseurl=http://dev.centos.org/centos/$releasever/testing/$basearch/ enabled=0 gpgcheck=1 gpgkey=http://dev.centos.org/centos/RPM-GPG-KEY-CentOS-testing php-5.2.9-2.el5.centos.x86_64.rpm is available http://dev.centos.org/centos/5/testing/x86_64/RPMS/ So I tried: yum clean all, *yum search php-5.2.9-2.el5.centos.x86_64.rpm* -- Warning: No matches found for: php-5.2.9-2.el5.centos.x86_64.rpm What I am doing wrong ? Thanks for your help.

  Read the article

• Suppress EXT3-fs warning on mount

  - by STM

  I am familiar with output suppress on Unix machines, ie: cat /file/that/doesnt/exist > /dev/null 2>& However I can't seem to suppress the output of mount when an ext3 filesystem is mounted for the nth time, and it recommends an fsck. As it happens, fscks are run regularly by another machine, so these warning messages are needlessly interrupting the flow of output to my pretty bash script. These are the errors: # mount -t ext3 /dev/sda1 /mnt > /dev/null 2>& kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,1), internal journal EXT3-fs: mounted filesystem with ordered data mode. Can anyone shed some light on this? I'm clearly blocking both fd's, but somehow output is still getting through. This is GNU Bash v2.05a

  Read the article

• Autodetect/mount SDCards and run script for them on Linux

  - by Brendan

  Hey Everyone, I'm currently running SME Server, and need to have a script run upon the attachment of SD Cards to my server. The script itself works fine (it copies the contents of the cards), but the automounting and execution of the script is where I'm having issues. The I have a USB hub consisting of 10 USB ports; that shows up as: [root@server ~]# lsusb Bus 004 Device 002: ID 0000:0000 Bus 004 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 055: ID 1a40:0101 TERMINUS TECHNOLOGY INC. Bus 001 Device 051: ID 1a40:0101 TERMINUS TECHNOLOGY INC. Bus 001 Device 050: ID 1a40:0101 TERMINUS TECHNOLOGY INC. Bus 001 Device 001: ID 0000:0000 (The hub is the TERMINUS TECHNOLOGY INC entries) As I cannot plug SD Cards directly into the server; I use a USB to SD card attachement (10 of them) plugged into the hub to read the cards. Upon pluggig the 10 attachments (without cards) into the hub; lsusb yields the following: [root@server ~]# lsusb Bus 004 Device 002: ID 0000:0000 Bus 004 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 073: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 072: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 071: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 070: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 069: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 068: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 067: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 066: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 065: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 064: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 055: ID 1a40:0101 TERMINUS TECHNOLOGY INC. Bus 001 Device 051: ID 1a40:0101 TERMINUS TECHNOLOGY INC. Bus 001 Device 050: ID 1a40:0101 TERMINUS TECHNOLOGY INC. Bus 001 Device 001: ID 0000:0000 As you can see, the readers are the "Gensys Logic, Inc" entries. Plugging in an SD card to a reader doesn't affect lsusb (it reads exactly as above), however my system recognises the cards fine; as indicated by dmesg: Attached scsi generic sg11 at scsi54, channel 0, id 0, lun 0, type 0 USB Mass Storage device found at 73 SCSI device sdd: 31388672 512-byte hdwr sectors (16071 MB) sdd: Write Protect is on sdd: Mode Sense: 03 00 80 00 sdd: assuming drive cache: write through SCSI device sdd: 31388672 512-byte hdwr sectors (16071 MB) sdd: Write Protect is on sdd: Mode Sense: 03 00 80 00 sdd: assuming drive cache: write through sdd: sdd1 SCSI device sdd: 31388672 512-byte hdwr sectors (16071 MB) sdd: Write Protect is on sdd: Mode Sense: 03 00 80 00 sdd: assuming drive cache: write through SCSI device sdd: 31388672 512-byte hdwr sectors (16071 MB) sdd: Write Protect is on sdd: Mode Sense: 03 00 80 00 sdd: assuming drive cache: write through sdd: sdd1 SCSI device sdd: 31388672 512-byte hdwr sectors (16071 MB) sdd: Write Protect is on sdd: Mode Sense: 03 00 80 00 sdd: assuming drive cache: write through SCSI device sdd: 31388672 512-byte hdwr sectors (16071 MB) sdd: Write Protect is on sdd: Mode Sense: 03 00 80 00 sdd: assuming drive cache: write through sdd: sdd1 If I manually mount sdd1 (mount /dev/sdd1 /somedirectory/) this works fine. What I'm really after is a solution that automounts each of the cards as they are inputted into the reader; and executes a script for them (this will involve copying their contents to another directory). My problem is that I don't know how to do this; I don't think udev will work as the USB devices don't change; if I could somehow get udev working with /dev/disk/by-path/ however I think this is doable (it seems to keep constant entries). ls /dev/disk returns: pci-0000:00:1d.7-usb-0:4.1.1.1:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.1.1.2:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.1.1.3:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.1.1.4:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.1.2:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.1.3:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.1.4:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.2:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.3:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.4:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.4:1.0-scsi-0:0:0:0-part1 pci-0000:0b:01.0-scsi-0:0:1:0 pci-0000:0b:01.0-scsi-0:0:1:0-part1 pci-0000:0b:01.0-scsi-0:0:1:0-part2 From above, we can see I have only one card plugged into the reader (pci-0000:00:1d.7-usb-0:4.4:1.0-scsi-0:0:0:0-part1). Going mount /dev/disk/by-path/pci-0000\:00\:1d.7-usb-0\:4.4\:1.0-scsi-0\:0\:0\:0-part1 Works and places the card under /media/usbdisk/, however: mount /dev/disk/by-path/pci-0000\:00\:1d.7-usb-0\:4.4\:1.0-scsi-0\:0\:0\:0-part1 slot1/ doesn't work, and returns "mount: can't get address for /dev/disk/by-path/pci-0000" Any ideas and solutions would be great, I've seen the knowledge of a lot of the guys on here before so I'm hopeful someone can help me out. Thanks

  Read the article

• Recovering text files in terminal using grep on Mac OS X Snow Leopard

  - by littlejim84

  I foolishly removed some source code from my Mac OS X Snow Leopard machine with rm -rf when doing something with buildout. I want to try and recover these files again. I haven't touched the system since to try and seek an answer. I found this article and it seems like the grep method is the way to go, but when running it on my machine I'm getting 'Resource busy' when trying to run it on the disk. I'm using this command: sudo grep -a -B1000 -A1000 'video_output' /dev/disk0s2 > file.txt Where 'dev/disk0s2' is what came up when I ran df. I get this when running: grep: /dev/disk0s2: Resource busy I'm not an expert with this stuff, I'm trying my best. Please can anyone help me further? I'm on the verge of losing two days of source code work! Thank you

  Read the article

• How to add a web folder via command line (Windows)

  - by Ryan

  I am trying to add a web folder via command line in windows. At first I though I should use the "net use" command, but when I tried I kept getting System error 67: C:net use * http://dev.subdomain.domain.tdl/dav/ the user name for 'dev.subdomain.domain.tdl': correctusername the password for dev.subdomain.domain.tdl: System error 67 has occurred. The network name cannot be found. The url I used works in a browser. It's an Apache dav on basic auth LDAP authentication method being used. Here's the thing... I CAN create a web folder when I use the "Add a network place" wizard. When I do net use, I don't see it listed in the prompt that follows. What utility do I need to use to mount a web folder in command line?

  Read the article

• losetup does not decrypt device in Ubuntu 11.4 as before

  - by Kay

  I had an external volume mounted using losetup for about two years. It was created using Ubuntu 9.4 and I used the same Ubuntu installation throughout all dist upgrades. Now as I bought a new laptop I set up a fresh Ubuntu 11.4 installation on it. Problem is: losetup -e twofish /dev/loop0 /dev/sdb2 does not decrypt the volume anymore. The data in /dev/loop0 contains apparently random data. I am sure I entered the correct password. I modprobe'd cryptoloop and twofish. My question is: Has Canonical done some obscure changes to losetup like adding a salt? Does losetup depend on configuration files I did not know about? How can I decrypt the volume on my now laptop?

  Read the article

• Forwarding ports with ssh on Linux

  - by Patrick Klingemann

  I have a database server, let's call it: dbserver I have a web server with access to my dbserver, let's call it: webserver I have a development machine that I'd like to use to access a database on dbserver, let's call it: dev dbserver has a firewall rule set to allow TCP requests from webserver to dbserver:1433 I'd like to set up a tunnel from dev:1433 to dbserver:1433, so all requests to 1433 on dev are passed along to dbserver:1433 My sshd_config on webserver has the following rules set: AllowTcpForwarding yes GatewayPorts yes This is what I've tried: ssh -v -L localhost:1433:dbserver:1433 webserver In another terminal: telnet localhost 1433 Results in: Trying ::1... Connected to localhost. Escape character is '^]'. Connection closed by foreign host. Any idea what I'm doing wrong here? Thanks in advance!

  Read the article

• CentOS default installation gave 60% disk space to tmpfs partition

  - by garconcn

  I installed a CentOS server which will be used for xen hypervisor. The server has two Intel(R) Xeon(R) CPU E5620 and 148G memory. The OS was installed on a 120G SSD drive. After the installation, I found that the tmpfs partition occupied about 60% of the drive. Even though I don't need much space for the OS, will there be any problem with 71G tmp partition? Thanks for any comment. [root@cloud ~]# df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup00-LogVol00 55G 1.1G 51G 3% / /dev/sda1 99M 13M 82M 14% /boot tmpfs 71G 0 71G 0% /dev/shm

  Read the article

• Making fdisk see software RAID 0

  - by unknownthreat

  I am following http://grub.enbug.org/Grub2LiveCdInstallGuide and I am using software RAID 0. I am using Ubuntu 10.10 LiveCD and is trying to restore grub2 after installing Windows 7 in another partition. Here is the console's outputs: ubuntu@ubuntu:~$ sudo fdisk -l Unable to seek on /dev/sad ubuntu@ubuntu:~$ sudo dmraid -r /dev/sdb: nvidia, "nvidia_acajefec", stripe, ok, 488397166 sectors, data@ 0 /dev/sda: nvidia, "nvidia_acajefec", stripe, ok, 488397166 sectors, data@ 0 So do you have an idea for how to make fdisk see my RAID array? How to make fdisk detect the Software RAID like dmraid?

  Read the article

• How to determine if a CentOS system is Raid-1?

  - by Tedd Johnson

  I've tried searching for this answer, but haven't found anything elegant. I have numerous servers in a colo that is in another state. I need to find a way to check that the servers have RAID-1 on them, so that I can determine if they were setup correctly by my colo. df -h shows: Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup00-LogVol00 442G 1.5G 418G 1% / /dev/sda1 99M 19M 75M 20% /boot tmpfs 4.0G 0 4.0G 0% /dev/shm however as CentOS uses LVM by default, this doesn't indicate if a RAID-1 is present. it is supposed to be a software raid, so I'm pretty sure there should be a way to check. Thanks

  Read the article

• Resizing mysterious partition written by DDing an ISO file

  - by Jon

  I downloaded clonezilla and then wrote it to a USB flash drive with this: dd if=clonezilla.iso of=/dev/sdb I've confirmed that the system boots and clonezilla runs from the flash drive. I want to store a clonezilla backup on the same flash drive clonezilla is running on, but I tried it and ran out of space, so I started looking at how to resize the mysterious partition type that was generated from the ISO. fdisk -l /dev/sdb .... Device Boot Start End Blocks Id System /dev/sdb1 * 1 111 113664 17 Hidden HPFS/NTFS .... I've tried using ntfsresize from the Debian ntfsprogs package. I'm trying gparted next, but thought I'd ask here if anyone knows a neat way to resize a partition created on flash from a liveCD image. Thanks in advance Jon ps. Assume Debian 6 please.

  Read the article

• Cannot use scp on Mac OS X

  - by Robert

  Hi all, when I try to copy any file with scp on Mac OS X Snow Leopard from another machine I get this error: scp [email protected]:/home/me/file.zip . Password: ... ---> Couldn't open /dev/null: Permission denied this is the output of "ls -l /dev/null": crw-rw-rw- 1 root wheel 3, 2 May 14 14:10 /dev/null I am in the group wheel, and even if I do "sudo scp..." it doesn't work. It's driving me crazy, do you have any suggestion? Thanx!

  Read the article

• After Upgrading Ubuntu to 9.10 my hard drive now has a warning.

  - by Sean

  it is a 500gb hard drive format as ext3 path /dev/sdc1 The disk utility does not even see this. This Warning is from gparted: e2label: No such device or address while trying to open /dev/sdc1 Couldn't find valid filesystem superblock. Couldn't find valid filesystem superblock. dump2fs 1.41.9 (22-Aug-2009) dumpe2fs: No such device or address while trying to open /dev/sdc1 Unable to read contents of this file system? Because of this some operations may be unavailable. END OF ERROR MESSAGE Did I lose something during the upgrade of the system? Was it the hard drive or the Ubuntu system that went bad?

  Read the article

• gltail “Missing gem net-ssh”

  - by Ian

  I'm attempting to get gltail set up on my local system to monitor logs remotely. I've got all the dependencies installed, but when I go to run gltail ... ./gl_tail configfile ../config.yaml I get this output: Missing gem net-ssh. Ubuntu: sudo gem install -y net-ssh -r .. which I've done a number of times. Here is the output: dev@ubuntu:~/Desktop/Fudge-gltail-e5b252d/bin$ sudo gem install net-ssh Successfully installed net-ssh-2.0.15 1 gem installed Installing ri documentation for net-ssh-2.0.15... Installing RDoc documentation for net-ssh-2.0.15... But when I go to run it again, I get the same missing gem net-ssh error. dev@ubuntu:~/Desktop/Fudge-gltail-e5b252d/bin$ which ruby /usr/bin/ruby dev@ubuntu:~/Desktop/Fudge-gltail-e5b252d/bin$ which gem /usr/bin/gem Why isn't net-ssh being seen as properly installed?

  Read the article

• Why does Apache ignore my Directory block?

  - by Codemonkey

  I just moved my projects into a new workstation. I'm having trouble getting my Apache installation to acknowledge my .htaccess files. This is my /etc/apache2/conf.d/dev config file: <Directory /home/codemonkey/dev/myproject/> Options -Indexes AllowOverride All Order Allow,Deny Deny from all </Directory> I know the config file is being included by Apache because it complains if I put erroneous syntax in it (Action 'configtest' fails). My project is reachable through Apache by a symlink in the /var/www directory. The server is running with my user and group, so it has my permissions. My entire dev folder has permissions set to 770 recursively. Despite all this, I'm still getting an indexed display of my project folder when I visit http://localhost/myproject. Why isn't the above config making it impossible to view the folder in the browser?

  Read the article

• Why is my hosts file not working?

  - by elliot100

  I've been using the hosts file to for local website development, and it's recently stopped working. No entries other than localhost resolve. I've simplified to test, so it now contains only 127.0.0.1 localhost ::1 localhost 127.0.0.1 test.dev localhost responds to ping, test.dev does not. The file is called hosts with no extension It has no trailing spaces It's saved in C:\WINDOWS\System32\drivers\etc which matches the value of HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\DataBasePath Oddly, despite UAC being on, I can edit, delete and save the file without admin permissions No proxy is being used, PC is not connected to network for testing Stopping the DNS Client service seemed to resolve the issue for a few minutes, test.dev briefly resolved but doesn't any more. Only firewall is Windows' Machine has been restarted. Is there anything else I should try?

  Read the article

• Problem reinstalling GRUB

  - by DisgruntledGoat

  I have a PC that dual-boots Ubuntu and Windows Vista. I recently reinstalled Windows Vista after some problems and now the bootloader's gone. I've been trying to follow this Ubuntu community guide but it's not working. I have Grub Legacy according to the first part (I installed Ubuntu 9.04 originally then upgraded). From the 9.04 LiveCD, I ran this: sudo grub-install --root-directory=/media/disk /dev/sda5 sda5 is the Ubuntu partition. I get this output: grub-probe: error: Cannot open `/boot/grub/device.map` [: 494: =: unexpected operator Installing GRUB to /dev/sda5 as (hd0,4)... Installation finished.No errors reported. This is the contents...(etc) (hd0) /dev/sda In the bit below, when I run setup (hd0) I get an error, "Error 17: Cannot mount selected partition" Little help?

  Read the article

• DNS Replication issue

  - by BillN

  We host the DNS for our domain. Two weeks ago, the developer requested that we setup a new zone 'dev.ourdomain.com' and place two host records in it my.dev.ourdomain.com and admin.dev.ourdomain.com. We added the zone to our DNS and added A records for the host. Now a week later, some DNS servers like google (8.8.8.8) and gtei (4.2.2.2) will resolve the hosts, but others like OpenDNS (208.67.222.222 ) and ATT Uverse (68.94.156.1) cannot resolve it. Any Ideas?

  Read the article

• Problem booting hard drive after installing Centos from USB Stick

  - by Rick

  Here is the situation, I created a Centos Live 5.4 Bootable USB drive. I used this to install Centos on a HP Netbook. BTW: the Netbook doesn't have a CDRom so I used the usb key. When the system goes to write the Grub boot loader to disk, it wants to write the boot loader to the usb drive (/dev/sda), not the hard disk (/dev/hda). I do have the option of writing the boot loader to /dev/hda, (not to the mbr!) but when I reboot I get an load error and the Grub prompt. How can I get Centos booting from the hard disk instead of using the USB key. Thanks.

  Read the article

• Wamp virtualhost with supporting of remote access

  - by Farid

  To cut the long story short, I've setup a Wamp server with local virtual host for domain like sample.dev, now I've bind my static IP and port 80 to my Apache and asked the client to make some changes in his hosts file and add x.x.x.x sample.dev , I've also configured my httpd virtual host like this : <VirtualHost *:80> ServerAlias sample.dev DocumentRoot 'webroot_directory' </VirtualHost> Client can reach to my web server using the direct access by ip address, but when he tries using the sample domain looks like he gets in to some infinite loop. The firewall is off too. What would be the problem?! Thanks.

  Read the article

• Subdomain only accessible from one computer

  - by Edan Maor

  I recently added a wildcard A record to my domain (*.root.com), mapping it to a certain elastic ip on AWS. I've configured apache to redirect all references to something.root.com to root.com, except for one specific "dev" subdomain, which is hosting its own site (a Django app, specifically). The Problem: This setup works perfectly for me on my computer. But on other computers around the office, it doesn't seem to work. Specifically, trying to visit dev.root.com gives an "unable to find server" error. Pinging dev.root.com gives a "cannot resolve hostname" error. The weird thing: pinging any other subdomain of root.com does work, from all machines. I would think this was all due to DNS propagation, except all the computers are behind the same office router, so how could that be the case? Any ideas?

  Read the article

• Pygrub with DRBD on Xen 3.2

  - by Joril

  Hi all, we have a two-node cluster using DRBD 8.2 on CentOS 5.2 64bit. The cluster runs a few VMs on top of Xen 3.2.1, here's the configuration for an Ubuntu Jaunty VM: name = 'dev' bootloader = '/usr/bin/pygrub' memory = '512' vif = [ 'ip=192.168.1.217,mac=00:16:3E:CD:60:80' ] disk = [ 'phy:/dev/drbd24,xvda1,w', 'phy:/dev/drbd25,xvda2,w' ] As you can see, the disks are specified like "phy:", and as such pygrub doesn't know a thing about the underlying drbd device... So my problem is that even though the VM boots just fine, it doesn't handle the state of the drbd device. As a result, when for some reason the device gets to a secondary/secondary state, the VM won't boot, and I have to manually specify which node is primary. I read that starting with Xen 3.3 pygrub understands the "drbd:" specification, and I think that it would fix my problem, but I can't upgrade Xen at the moment... Is there a workaround? For example, could I use the 3.3 version of pygrub? Thanks!

  Read the article

• HELP! Free space not reclaimed after online resizing ext4 in Ubuntu 9.10

  - by TiansHUo

  My root partition was filling up, with only 500 mbs left, I wanted to resize my root partition from 20 Gb to 40Gb So I resized my partition by using these steps: Using Gparted to resize another partition to give space for the EXT4 Using fdisk, deleting the root partition (on /dev/sda2), and creating it again using the new size resize2fs /dev/sda2 Updating grub2 But now the problem is that although I can boot in my new partition and the new partition shows it is 40Gb, but the free size was still 500mb. So I booted from a LiveCD and checked with e2fsck -p /dev/sda2, it reported clean. So I added the -f flag (force check), still, the drive is full.

  Read the article

• OpenVPN route missing

  - by dajuric

  I can connect to an OpenVPN server from Windows without any problems. But when I try to connect from Ubuntu 12.04 (start OpenVPN) I receive the following: OpenVPN needs a gateway parameter for a --route option and no default was specified by either --route-gateway or --ifconfig options SERVER IP: 161.53.X.X internal network: 10.0.0.0 / 8 What I need to do ? client configuration: client dev tap proto udp remote 161.53.X.X 1194 resolv-retry infinite nobind ca ca.crt cert client.crt key client.key ns-cert-type server comp-lzo verb 3 server conf: local 161.53.X.X port 1194 proto udp dev tap dev-node OpenVPN ca ca.crt cert server.crt key server.key # This file should be kept secret dh dh1024.pem # DHCP leases addresses to clients server-bridge # Push routes to the client to allow it # to reach other private subnets behind # the server. Remember that these # private subnets will also need # to know to route the OpenVPN client # address pool (10.8.0.0/255.255.255.0) # back to the OpenVPN server. push "route 10.0.0.1 255.255.0.0" client-to-client duplicate-cn keepalive 10 120 comp-lzo verb 6

  Read the article

< Previous Page | 97 98 99 100 101 102 103 104 105 106 107 108  | Next Page >