Search Results

Search found 7715 results on 309 pages for 'ms pl'.

Page 101/309 | < Previous Page | 97 98 99 100 101 102 103 104 105 106 107 108  | Next Page >

• Ubuntu Server Cannot Route to the Internet

  - by ejes

  I've been having this problem for weeks now, and I can't seem to figure out the problem. My server can route the local network and serves it well, however it cannot access the internet. It can't be the router because everything else on this lan can route through the router. I've even switched the ethernet port. Any help would be appreciated. I've tried all the usual places, anyway, here are the configs: root@uhs:~# uname -a Linux uhs 3.0.0-16-generic-pae #28-Ubuntu SMP Fri Jan 27 19:24:01 UTC 2012 i686 i686 i386 GNU/Linux root@uhs:~# cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface # auto eth1 # iface eth1 inet dhcp auto eth0 iface eth0 inet static address 192.168.0.3 netmask 255.255.255.0 broadcast 192.168.0.255 gateway 192.168.0.1 root@uhs:~# ping -c 4 192.168.0.1 PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data. 64 bytes from 192.168.0.1: icmp_req=1 ttl=64 time=0.334 ms 64 bytes from 192.168.0.1: icmp_req=2 ttl=64 time=0.339 ms 64 bytes from 192.168.0.1: icmp_req=3 ttl=64 time=0.324 ms 64 bytes from 192.168.0.1: icmp_req=4 ttl=64 time=0.339 ms --- 192.168.0.1 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 2997ms rtt min/avg/max/mdev = 0.324/0.334/0.339/0.006 ms root@uhs:~# ping -c 4 209.85.145.103 PING 209.85.145.103 (209.85.145.103) 56(84) bytes of data. --- 209.85.145.103 ping statistics --- 4 packets transmitted, 0 received, 100% packet loss, time 3023ms root@uhs:~# ifconfig eth0 Link encap:Ethernet HWaddr 00:0c:6e:a0:92:6e inet addr:192.168.0.3 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::20c:6eff:fea0:926e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13131114 errors:0 dropped:0 overruns:0 frame:0 TX packets:10540297 errors:0 dropped:0 overruns:5 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3077922794 (3.0 GB) TX bytes:3827489734 (3.8 GB) Interrupt:10 Base address:0xa000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:7721 errors:0 dropped:0 overruns:0 frame:0 TX packets:7721 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:551950 (551.9 KB) TX bytes:551950 (551.9 KB) root@uhs:~# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 100 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 root@uhs:~# # PRETEND Traceroute root@uhs:~# for i in {1..30}; do ping -t $i -c 1 209.85.145.103; done | grep "Time to live exceeded" root@uhs:~#

  Read the article

• Why can't I install Microsoft Office 2007 in Ubuntu 11.04?

  - by DK new

  I am very new to Ubuntu and only just getting a hang of it, and my questions might sound stupid especially because I am a learner in terms of techie things as well. So because of the nature of work where everyone uses stupid Windows and Microsoft, I need to have access to MS Office 2007/2010 as documents with too many tables or images open all haywire in Libre Office (which has otherwise been great!). I have been reading up about installing MS Office through WINE/PlayonLinux, but have been unsuccessful so far. I downloaded a MS Office 2007 package from Pirate Bay, which I extracted into a folder. I tried numerous different ways to install through WINE and PlayonLinux, but will discuss the one which seems to be getting me somewhere. http://www.webupd8.org/2011/01/how-to-install-microsoft-office-2007-in.html ..... Initially, when I would click on the install button of MS Office, I get a message saying "The install location you selected does not have 1558MB free space. Free up space from the selected install location or choose a different install location". The install location in this case said "C:\Program Files\Microsoft Office", which confused me as I don't have drives named as C, Z etc. I went to configure WINE and under the drives tab, created a drive named A with the path location /media/cd025f16-433b-4a90-abb6-bb7a025d0450/. Also the space thing is confusing as I have at least 450GB of unused space on my computer. anyways, when I selected the A drive for installation, the installation starts, but soon I get the following error message, "Office cannot find Office.en-us\OfficeLR.Cab. Browse to a valid installation source" .... The part saying "OfficeLR.Cab" have said different things after the Office bit every time I have made an attempt. When I select the Office.en-us sub-folder or any other folder within the folder where MS Office 2007 is saved, it says "invalid source"! I have been trying to get this sorted since 15hrs now (addictive!) and have learnt loads of things in the process, but have not managed to crack it. It might be something stupidly simple I am not aware off that is stopping it. I would really appreciate some help! Thanks a lot.. Also I am still getting used to the language, so might have many questions Also I am using Ubuntu 11.04 (tag 11.04). Also I think I don't have windows -- when my friend installed Ubuntu on my new laptop which had Windows 7, he was trying to keep windows in a separate partition, but something happened and windows was not there! Looking forward to some support! Again thanks a lot

  Read the article

• CPU and Data alignment

  - by MS

  Dear All, Pardon me if you feel this has been answered numerous times, but I need answers to the following queries! Why data has to be aligned (on 4 byte/ 8 byte/ 2 byte boundaries)? Here my doubt is when the CPU has address lines Ax Ax-1 Ax-2 ... A2 A1 A0 then it is quite possible to address the memory locations sequentially. So why there is the need to align the data at specific boundaries? How to find the alignment requirements when I am compiling my code and generating the executatble? If for e.g the data alignment is 4 byte boundary, does that mean each consecutive byte is located at modulo 4 offsets? My doubt is if data is 4 byte aligned does that mean that if a byte is at 1004 then the next byte is at 1008 (or at 1005)? Your thoughts are much welcome. Thanks in advance! /MS

  Read the article

• AWStats is processing log files but does not display them

  - by Wouter

  I've setup AWStats on my VPS to get some more insight into the traffic coming to my site. As instructed I ran a manual build/update which ran fine: sudo -u www-data ./awstats.pl -config=xxxx.com Create/Update database for config "/etc/awstats/awstats.xxxx.com.conf" by AWStats version 6.9 (build 1.925) From data in log file "/usr/share/doc/awstats/examples/logresolvemerge.pl /var/www/xxxx.com/logs/*-access.log |"... Phase 1 : First bypass old records, searching new record... Searching new records from beginning of log file... Phase 2 : Now process new records (Flush history on disk after 20000 hosts)... Warning: awstats has detected that some hosts names were already resolved in your logfile /usr/share/doc/awstats/examples/logresolvemerge.pl /var/www/xxxx.com/logs/*-access.log |. If DNS lookup was already made by the logger (web server), you should change your setup DNSLookup=1 into DNSLookup=0 to increase awstats speed. Jumped lines in file: 0 Parsed lines in file: 814 Found 0 dropped records, Found 0 corrupted records, Found 0 old records, Found 814 new qualified records. It also produced the file in the DatDir: /var/lib/awstats/awstats052010.xxxx.com.txt which contains what I would expect. BUT when I visit: xxxx.com/awstats/awstats.pl it tells me Last Update: Never updated (See 'Build/Update' on awstats_setup.html page) and the rest of the page is blank. I'm pretty sure I set it up correctly but now I cannot figure out why this is happening. Hopefully someone smarter then me can help me. Thank you in advanced.

  Read the article

• OTRS upgrade 3.0 to 3.1 fails

  - by Valentin0S

  Today I've started upgrading OTRS from version 2.3 to 2.4 , 2.4 to 3.0 and 3.0 to 3.1. Everything went smoothly except the upgrade from 3.0 to 3.1 OTRS provides a few perl scripts which make the upgrade easier. I've used these scripts for each upgrade step. The upgrade from 3.0 to 3.1 fails at the following after using the upgrade script. scripts/DBUpdate-to-3.1.pl The error is : root@tickets:/opt/otrs# su - otrs $ scripts/DBUpdate-to-3.1.pl Migration started... Step 1 of 24: Refresh configuration cache... If you see warnings about 'Subroutine Load redefined', that's fine, no need to worry! Subroutine Load redefined at /opt/otrs/Kernel/Config/Files/ZZZAAuto.pm line 5. Subroutine Load redefined at /opt/otrs/Kernel/Config/Files/ZZZAuto.pm line 4. done. Step 2 of 24: Check framework version... done. Step 3 of 24: Creating DynamicField tables (if necessary)... done. DBD::mysql::db do failed: Cannot add or update a child row: a foreign key constraint fails (`pp_otrs`.`dynamic_field`, CONSTRAINT `FK_dynamic_field_create_by_id` FOREIGN KEY (`create_by`) REFERENCES `users` (`id`)) at /opt/otrs-3.1.10/Kernel/System/DB.pm line 478. ERROR: OTRS-DBUpdate-to-3.1-10 Perl: 5.14.2 OS: linux Time: Wed Sep 5 15:36:20 2012 Message: Cannot add or update a child row: a foreign key constraint fails (`pp_otrs`.`dynamic_field`, CONSTRAINT `FK_dynamic_field_create_by_id` FOREIGN KEY (`create_by`) REFERENCES `users` (`id`)), SQL: 'INSERT INTO dynamic_field (name, label, field_order, field_type, object_type, config, valid_id, create_time, create_by, change_time, change_by) VALUES (?, ?, ?, 'Text', 'Ticket', '--- {} ', 1, '2012-09-05 15:36:20' , 1, '2012-09-05 15:36:20' , 1)' Traceback (20405): Module: main::_DynamicFieldCreation (v1.85) Line: 466 Module: scripts/DBUpdate-to-3.1.pl (v1.85) Line: 95 Could not create new DynamicField TicketFreeKey1 at scripts/DBUpdate-to-3.1.pl line 477. Step 4 of 24: Create new dynamic fields for free fields (text, key, date)... $ Did anyone else face the same issue? Thanks in advance

  Read the article

• flask, lighttpd with fastcgi can't get it to work

  - by kurojishi

  i'm tring to deploy a simple flask script to a lighttpd server with fastcgi. this is the configuration file for lighttpd builded using the flask documentation http://flask.pocoo.org/docs/deploying/fastcgi/#configuring-lighttpd server.modules = ( "mod_access", "mod_alias", "mod_compress", "mod_redirect", "mod_rewrite", "mod_fastcgi", ) server.document-root = "/var/www" server.upload-dirs = ( "/var/cache/lighttpd/uploads" ) server.errorlog = "/var/log/lighttpd/error.log" server.pid-file = "/var/run/lighttpd.pid" server.username = "www-data" server.groupname = "www-data" index-file.names = ( "index.php", "index.html", "index.htm", "default.htm", " index.lighttpd.html" ) url.access-deny = ( "~", ".inc" ) static-file.exclude-extensions = ( ".php", ".pl", ".fcgi" ) var.home_dir = "/var/lib/lighttpd" var.socket_dir = home_dir + "sockets/" ## Use ipv6 if available #include_shell "/usr/share/lighttpd/use-ipv6.pl" dir-listing.encoding = "utf-8" server.dir-listing = "enable" compress.cache-dir = "/var/cache/lighttpd/compress/" compress.filetype = ( "application/x-javascript", "text/css", "text/html", "text/plain" ) include_shell "/usr/share/lighttpd/create-mime.assign.pl" include_shell "/usr/share/lighttpd/include-conf-enabled.pl" fastcgi.server = ("weibo/callback.fcgi" => (( "socket" => "/tmp/weibocrawler-fcgi.sock", "bin-path" => "/var/www/weibo/callback.fcgi", "check-local" => "disable", "max-procs" => 1 )) ) url.rewrite-once = ( "^(/weibo($|/.*))$" => "$1", "^(/.*)$" => "weibo/callback.fcgi$1" and this is the script i'm tring to run: #!/home/nrl/kuro/weiboenv/bin/python from flup.server.fcgi import WSGIServer from callback import app if __name__ == '__main__': WSGIServer(application, bindAddress='/tmp/weibocrawler-fcgi.sock').run() but i have this error testing the configuration file i get this error: 2013-07-02 17:15:42: (configfile.c.912) source: lighttpd.conf.new line: 52 pos: 1 parser failed somehow near here: weibo/callback.fcgi$1 when i remove the urlrewrite i get these errors in the log even if the daemon start: 2013-07-02 16:25:53: (log.c.166) server started 2013-07-02 16:25:53: (mod_fastcgi.c.1104) the fastcgi-backend fcgi.py failed to start: 2013-07-02 16:25:53: (mod_fastcgi.c.1108) child exited with status 2 fcgi.py 2013-07-02 16:25:53: (mod_fastcgi.c.1111) If you're trying to run your app as a FastCGI backend, make sure you're using the FastCGI-enabled version. If this is PHP on Gentoo, add 'fastcgi' to the USE flags. 2013-07-02 16:25:53: (mod_fastcgi.c.1399) [ERROR]: spawning fcgi failed. 2013-07-02 16:25:53: (server.c.938) Configuration of plugins failed. Going down.

  Read the article

• on debian, lighttpd apache2 using 80 port, lighttpd throws :address already use error

  - by user1960581

  I bought the linode(linode.com) server the other day. I've been trying to run lighttpd and apache2 at the same port, using lighttpd for static files. As linode is only providing ONE ipv4 address, I tried to bind lighttpd on the ipv6 address. That's where I got the same error each and very single time: can't bind to port [ipv6] 80 Address already in use. I tried bind the ipv4 address. Everything worked. Please help me, this is driving me nuts for the last two days. my lighttpd.conf file:(the ipv6 address isn't true) server.modules = ( "mod_access", "mod_alias", "mod_compress", "mod_redirect", # "mod_rewrite", ) server.document-root = "/var/www" server.upload-dirs = ( "/var/cache/lighttpd/uploads" ) server.errorlog = "/var/log/lighttpd/error.log" server.pid-file = "/var/run/lighttpd.pid" server.username = "www-data" server.groupname = "www-data" server.port = 80 server.bind = "2600:3c02::0000" server.use-ipv6 = "enable" #server.pid-file = "/var/run/lighttpd.pid" index-file.names = ( "index.php", "index.html", "index.lighttpd.html" ) url.access-deny = ( "~", ".inc" ) static-file.exclude-extensions = ( ".php", ".pl", ".fcgi" ) compress.cache-dir = "/var/cache/lighttpd/compress/" compress.filetype = ( "application/javascript", "text/css", "text/html", "text/plain" ) # default listening port for IPv6 falls back to the IPv4 port #include_shell "/usr/share/lighttpd/use-ipv6.pl " + server.port include_shell "/usr/share/lighttpd/create-mime.assign.pl" include_shell "/usr/share/lighttpd/include-conf-enabled.pl" ### ipv6 ### $SERVER["socket"] == "[2600:3c02::0000]:80" { # accesslog.filename = "var/log/lighttpd/ipv6/access.log" # server.document-root = "/var/www/" # server.error-handler-404 = "/index.php?error=404" } and the error message: can't bind to port, 2600:3c02::0000 Address already in use.

  Read the article

• OpenVPN: ERROR: could not read Auth username from stdin

  - by user56231

  I managed to setup openvpn but now I want to integrate a user/pass authentication method so, even though I haven't added the auth-nocache in the server config, whenever I try to connect it returns with the following message on the client side: ERROR: could not read Auth username from stdin My server.conf file contains basic stuff, everything works up untill I try to implement this for of authentication. mode server dev tun proto tcp port 1194 keepalive 10 120 plugin /usr/lib/openvpn/openvpn-auth-pam.so login client-cert-not-required username-as-common-name auth-user-pass-verify /etc/openvpn/auth.pl via-env ca /etc/openvpn/easy-rsa/2.0/keys/ca.crt cert /etc/openvpn/easy-rsa/2.0/keys/server.crt key /etc/openvpn/easy-rsa/2.0/keys/server.key dh /etc/openvpn/easy-rsa/2.0/keys/dh1024.pem user nobody group nogroup server 10.8.0.0 255.255.255.0 persist-key persist-tun #persist-local-ip status openvpn-status.log verb 3 client-to-client push "redirect-gateway def1" push "dhcp-option DNS 10.8.0.1" log-append /var/log/openvpn comp-lzo I searched all over the net for a solution and all answers seems to be related to the auth-nocache param which I haven't set. The directive auth-user-pass-verify /etc/openvpn/auth.pl via-env points to a script which is executed to perform the authentication. A false authentication should result in a exit 1 while a true one should result with exit 0. For testing, that script auth.pl returns exit 0 no matter what the input is but it seems that the file is not executed before the error raises. auth.pl file contents: #!/usr/bin/perl my $user = $ENV{username}; my $passwd = $ENV{password}; printf("$user : $passwd\n"); exit 0; Any ideas?

  Read the article

• Centos 5.xx Nagios sSMTP mail cannot be sent from nagios server, but works great from console

  - by adam

  I spent last 3 hours of reasearch on how to get nagios to work with email notifications, i need to send emails form work where the only accesible smtp server is the company's one. i managed to get it done from the console using: mail [email protected] working perfectly for the purpouse i set up ssmtp.conf so as: root=adam.xxxx@company.pl mailhub=smtp.company.com:587 AuthUser=adam.xxx@company.pl AuthPass=mypassword FromLineOverride=YES useSTARTTLS=YES rewriteDomain=company.pl hostname=nagios UseTLS=YES i also edited the file /etc/ssmtp/revaliases so as: root:[email protected]:smtp.company.com:587 nagios:[email protected]:smtp.company.com:587 nagiosadmin:[email protected]:smtp.company.com:587 i also edited the file permisions for /etc/ssmtp/* so as: -rwxrwxrwx 1 root nagios 371 lis 22 15:27 /etc/ssmtp/revaliases -rwxrwxrwx 1 root nagios 1569 lis 22 17:36 /etc/ssmtp/ssmtp.conf and i assigned to proper groups i belive: cat /etc/group |grep nagios mail:x:12:mail,postfix,nagios mailnull:x:47:nagios nagios:x:2106:nagios nagcmd:x:2107:nagios when i send mail manualy, i recieve it on my priv box, but when i send mail from nagios the mail log says: Nov 22 17:47:03 certa-vm2 sSMTP[9099]: MAIL FROM:<[email protected]> Nov 22 17:47:03 certa-vm2 sSMTP[9099]: 550 You are not allowed to send mail from this address it says [email protected] and im not allowed to send mails claiming to be [email protected], its suppoused to be [email protected], what am i doing wrong? i ran out of tricks... kind regards Adam xxxx

  Read the article

• How can I enable IIS to run Perl scripts?

  - by eidylon

  we're trying to get awstats up and running on our IIS6 server. awstats is running fine and generating output and all that jazz... no problem there. When trying to change the selected month/year in the output page though, it is trying to run awstats.pl through IIS, and coming up with a 404 error. To debug I made a simple hello.pl in my root, and tried to run that, also 404s. I followed the directions on this page http://support.microsoft.com/kb/245225 regarding installing ActiveState Perl and then configuring IIS. I added the extension mapping on my directory and registered the web services extension as directed. The perl scripts all run fine and output if run from the command line, so I know perl is good, but I can't get IIS to find the files. Here is the configuration on my the home directory tab of my site: Here is the configuration of my web service extension: I turned on directory browsing for this site, and when i get the listing of the directory, IIS actually does show the .pl files being in the directory. But if I click on one of them, I get the 404 error. 12/17 15:22 Also tried adding .pl as a mime-type on my site's configuration. This did not help. 12/17 16:57 Also tried Everyone Read/Execute permissions on both the Perl direcory and the directory housing awstats. This did not help.

  Read the article

• C# Confusing Results from Performance Test

  - by aip.cd.aish

  I am currently working on an image processing application. The application captures images from a webcam and then does some processing on it. The app needs to be real time responsive (ideally < 50ms to process each request). I have been doing some timing tests on the code I have and I found something very interesting (see below). clearLog(); log("Log cleared"); camera.QueryFrame(); camera.QueryFrame(); log("Camera buffer cleared"); Sensor s = t.val; log("Sx: " + S.X + " Sy: " + S.Y); Image<Bgr, Byte> cameraImage = camera.QueryFrame(); log("Camera output acuired for processing"); Each time the log is called the time since the beginning of the processing is displayed. Here is my log output: [3 ms]Log cleared [41 ms]Camera buffer cleared [41 ms]Sx: 589 Sy: 414 [112 ms]Camera output acuired for processing The timings are computed using a StopWatch from System.Diagonostics. QUESTION 1 I find this slightly interesting, since when the same method is called twice it executes in ~40ms and when it is called once the next time it took longer (~70ms). Assigning the value can't really be taking that long right? QUESTION 2 Also the timing for each step recorded above varies from time to time. The values for some steps are sometimes as low as 0ms and sometimes as high as 100ms. Though most of the numbers seem to be relatively consistent. I guess this may be because the CPU was used by some other process in the mean time? (If this is for some other reason, please let me know) Is there some way to ensure that when this function runs, it gets the highest priority? So that the speed test results will be consistently low (in terms of time). EDIT I change the code to remove the two blank query frames from above, so the code is now: clearLog(); log("Log cleared"); Sensor s = t.val; log("Sx: " + S.X + " Sy: " + S.Y); Image<Bgr, Byte> cameraImage = camera.QueryFrame(); log("Camera output acuired for processing"); The timing results are now: [2 ms]Log cleared [3 ms]Sx: 589 Sy: 414 [5 ms]Camera output acuired for processing The next steps now take longer (sometimes, the next step jumps to after 20-30ms, while the next step was previously almost instantaneous). I am guessing this is due to the CPU scheduling. Is there someway I can ensure the CPU does not get scheduled to do something else while it is running through this code?

  Read the article

• Why is numpy's einsum faster than numpy's built in functions?

  - by Ophion

  Lets start with three arrays of dtype=np.double. Timings are performed on a intel CPU using numpy 1.7.1 compiled with icc and linked to intel's mkl. A AMD cpu with numpy 1.6.1 compiled with gcc without mkl was also used to verify the timings. Please note the timings scale nearly linearly with system size and are not due to the small overhead incurred in the numpy functions if statements these difference will show up in microseconds not milliseconds: arr_1D=np.arange(500,dtype=np.double) large_arr_1D=np.arange(100000,dtype=np.double) arr_2D=np.arange(500**2,dtype=np.double).reshape(500,500) arr_3D=np.arange(500**3,dtype=np.double).reshape(500,500,500) First lets look at the np.sum function: np.all(np.sum(arr_3D)==np.einsum('ijk->',arr_3D)) True %timeit np.sum(arr_3D) 10 loops, best of 3: 142 ms per loop %timeit np.einsum('ijk->', arr_3D) 10 loops, best of 3: 70.2 ms per loop Powers: np.allclose(arr_3D*arr_3D*arr_3D,np.einsum('ijk,ijk,ijk->ijk',arr_3D,arr_3D,arr_3D)) True %timeit arr_3D*arr_3D*arr_3D 1 loops, best of 3: 1.32 s per loop %timeit np.einsum('ijk,ijk,ijk->ijk', arr_3D, arr_3D, arr_3D) 1 loops, best of 3: 694 ms per loop Outer product: np.all(np.outer(arr_1D,arr_1D)==np.einsum('i,k->ik',arr_1D,arr_1D)) True %timeit np.outer(arr_1D, arr_1D) 1000 loops, best of 3: 411 us per loop %timeit np.einsum('i,k->ik', arr_1D, arr_1D) 1000 loops, best of 3: 245 us per loop All of the above are twice as fast with np.einsum. These should be apples to apples comparisons as everything is specifically of dtype=np.double. I would expect the speed up in an operation like this: np.allclose(np.sum(arr_2D*arr_3D),np.einsum('ij,oij->',arr_2D,arr_3D)) True %timeit np.sum(arr_2D*arr_3D) 1 loops, best of 3: 813 ms per loop %timeit np.einsum('ij,oij->', arr_2D, arr_3D) 10 loops, best of 3: 85.1 ms per loop Einsum seems to be at least twice as fast for np.inner, np.outer, np.kron, and np.sum regardless of axes selection. The primary exception being np.dot as it calls DGEMM from a BLAS library. So why is np.einsum faster that other numpy functions that are equivalent? The DGEMM case for completeness: np.allclose(np.dot(arr_2D,arr_2D),np.einsum('ij,jk',arr_2D,arr_2D)) True %timeit np.einsum('ij,jk',arr_2D,arr_2D) 10 loops, best of 3: 56.1 ms per loop %timeit np.dot(arr_2D,arr_2D) 100 loops, best of 3: 5.17 ms per loop The leading theory is from @sebergs comment that np.einsum can make use of SSE2, but numpy's ufuncs will not until numpy 1.8 (see the change log). I believe this is the correct answer, but have not been able to confirm it. Some limited proof can be found by changing the dtype of input array and observing speed difference and the fact that not everyone observes the same trends in timings.

  Read the article

• Is there any way that an export-to-Excel function can be scalable?

  - by MusiGenesis

  Summary: ASP.Net website with a couple hundred users. Data is exported to Excel files which can be relatively large (~5 MB). In the pilot phase (just a few users), we are already seeing occasional errors on the server in the exporting method. Here's the stack trace: System.Web.HttpUnhandledException: Exception of type 'System.Web.HttpUnhandledException' was thrown. --- System.OutOfMemoryException: Exception of type 'System.OutOfMemoryException' was thrown. at System.IO.MemoryStream.set_Capacity(Int32 value) at System.IO.MemoryStream.EnsureCapacity(Int32 value) at System.IO.MemoryStream.Write(Byte[] buffer, Int32 offset, Int32 count) at MS.Internal.IO.Packaging.TrackingMemoryStream.Write(Byte[] buffer, Int32 offset, Int32 count) at MS.Internal.IO.Packaging.SparseMemoryStream.WriteAndCollapseBlocks(Byte[ ] buffer, Int32 offset, Int32 count) at MS.Internal.IO.Packaging.SparseMemoryStream.Write(Byte[] buffer, Int32 offset, Int32 count) at MS.Internal.IO.Packaging.CompressEmulationStream.Write(Byte[] buffer, Int32 offset, Int32 count) at MS.Internal.IO.Packaging.CompressStream.Write(Byte[] buffer, Int32 offset, Int32 count) at MS.Internal.IO.Zip.ProgressiveCrcCalculatingStream.Write(Byte[] buffer, Int32 offset, Int32 count) at MS.Internal.IO.Zip.ZipIOModeEnforcingStream.Write(Byte[] buffer, Int32 offset, Int32 count) at System.IO.StreamWriter.Flush(Boolean flushStream, Boolean flushEncoder) at System.IO.StreamWriter.Write(String value) at System.Xml.XmlTextEncoder.Write(String text) at System.Xml.XmlTextWriter.WriteString(String text) at System.Xml.XmlText.WriteTo(XmlWriter w) at System.Xml.XmlAttribute.WriteContentTo(XmlWriter w) at System.Xml.XmlAttribute.WriteTo(XmlWriter w) at System.Xml.XmlElement.WriteTo(XmlWriter w) at System.Xml.XmlElement.WriteContentTo(XmlWriter w) at System.Xml.XmlElement.WriteTo(XmlWriter w) at System.Xml.XmlElement.WriteContentTo(XmlWriter w) at System.Xml.XmlElement.WriteTo(XmlWriter w) at System.Xml.XmlElement.WriteContentTo(XmlWriter w) at System.Xml.XmlElement.WriteTo(XmlWriter w) at System.Xml.XmlDocument.WriteContentTo(XmlWriter xw) at System.Xml.XmlDocument.WriteTo(XmlWriter w) at System.Xml.XmlDocument.Save(Stream outStream) at OfficeOpenXml.ExcelWorksheet.Save() in C:\temp\XXXXXXXXXX\ExcelPackage\ExcelWorksheet.cs:line 605 at OfficeOpenXml.ExcelWorkbook.Save() in C:\temp\XXXXXXXXXX\ExcelPackage\ExcelWorkbook.cs:line 439 at OfficeOpenXml.ExcelPackage.Save() in C:\temp\XXXXXXXXXX\ExcelPackage\ExcelPackage.cs:line 348 at Framework.Exporting.Business.ExcelExport.BuildReport(HttpContext context) at WebUserControl.BtnXLS_Click(Object sender, EventArgs e) in C:\TEMP\XXXXXXXXXX\XXXXXXXXXX\OneList\UserControls\TicketReportExporter. ascx.cs:line 108 at System.Web.UI.WebControls.Button.OnClick(EventArgs e) at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) at System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.Rai sePostBackEvent(String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) --- End of inner exception stack trace --- at System.Web.UI.Page.HandleError(Exception e) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest() at System.Web.UI.Page.ProcessRequestWithNoAssert(HttpContext context) at System.Web.UI.Page.ProcessRequest(HttpContext context) at ASP.XXXXXXXXXXX_aspx.ProcessRequest(HttpContext context) in c:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\Temporary ASP.NET Files\XXXX\cdf32a52\d1a5eabd\App_Web_enxdwlks.1.cs:line 0 at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpAppli cation.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) Even aside from this particular problem, in general exporting to Excel requires the instantiation of huge Excel objects on the server for each request, which I've always assumed to mean disqualifies Excel for "serious" work on a highly-loaded server. Is there any general way to export to Excel in a "light-weight" manner? Would simply streaming the data into a CSV file work for this?

  Read the article

• Exception showing a erroneous web page in a WPF frame

  - by H4mm3rHead

  I have a small application where i need to navigate to an url, I use this method to get the Frame: public override System.Windows.UIElement GetPage(System.Windows.UIElement container) { XmlDocument doc = new XmlDocument(); doc.Load(Location); string webSiteUrl = doc.SelectSingleNode("website").InnerText; Frame newFrame = new Frame(); if (!webSiteUrl.StartsWith("http://")) { webSiteUrl = "http://" + webSiteUrl; } newFrame.Source = new Uri(webSiteUrl); return newFrame; } My problem is now that the page im trying to show generates a error (or so i think), when i load the page in a browser it never fully loads, keeps saying "loading1 element" in the load bar and the green progress line (IE 8) keeps showing. When i attach my debugger i get this error: System.ArgumentException was unhandled Message="Parameter and value pair is not valid. Expected form is parameter=value." Source="WindowsBase" StackTrace: at MS.Internal.ContentType.ParseParameterAndValue(String parameterAndValue) at MS.Internal.ContentType..ctor(String contentType) at MS.Internal.WpfWebRequestHelper.GetContentType(WebResponse response) at System.Windows.Navigation.NavigationService.GetObjectFromResponse(WebRequest request, WebResponse response, Uri destinationUri, Object navState) at System.Windows.Navigation.NavigationService.HandleWebResponse(IAsyncResult ar) at System.Windows.Navigation.NavigationService.<>c__DisplayClassc.<HandleWebResponseOnRightDispatcher>b__8(Object unused) at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Boolean isSingleParameter) at System.Windows.Threading.ExceptionWrapper.TryCatchWhen(Object source, Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler) at System.Windows.Threading.DispatcherOperation.InvokeImpl() at System.Threading.ExecutionContext.runTryCode(Object userData) at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Windows.Threading.DispatcherOperation.Invoke() at System.Windows.Threading.Dispatcher.ProcessQueue() at System.Windows.Threading.Dispatcher.WndProcHook(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled) at MS.Win32.HwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled) at MS.Win32.HwndSubclass.DispatcherCallbackOperation(Object o) at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Boolean isSingleParameter) at System.Windows.Threading.ExceptionWrapper.TryCatchWhen(Object source, Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler) ved System.Windows.Threading.Dispatcher.InvokeImpl(DispatcherPriority priority, TimeSpan timeout, Delegate method, Object args, Boolean isSingleParameter) at MS.Win32.HwndSubclass.SubclassWndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam) at MS.Win32.UnsafeNativeMethods.DispatchMessage(MSG& msg) at System.Windows.Threading.Dispatcher.TranslateAndDispatchMessage(MSG& msg) at System.Windows.Threading.Dispatcher.PushFrameImpl(DispatcherFrame frame) at System.Windows.Application.RunInternal(Window window) at GreenWebPlayerWPF.App.Main() i C:\Development\Hvarregaard\GWDS\GreenWeb\GreenWebPlayerWPF\obj\Debug\App.g.cs:linje 0 at System.AppDomain._nExecuteAssembly(Assembly assembly, String[] args) at Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly() at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Threading.ThreadHelper.ThreadStart() InnerException: Anyone? Or any way to capture it and respond to it, tried a try/catch around my code, but its not caught - seems something deep inside the guts of the CLR is failing.

  Read the article

• SQL Developer Blitz at ODTUG Kscope12

  - by thatjeffsmith

  Oracle Development Tools User Group (ODTUG) puts on an outstanding event, and I enjoy that the content comes FIRST. Yes, the after-event parties and entertainment are first class, but I look forward most to sitting in on some excellent sessions. For Kscope12 one would expect Oracle to have a large presence, and you would be absolutely correct! The APEX team will be there in full force, and we’ll have sessions on JDeveloper, ADF, and .NET. But what I want to talk about today is our awesome line-up of coverage for Oracle SQL Developer (Surprise!) DB and Developer’s Toolbox Symposium Kris Rice or @krisrice, Product Development Manager for SQL Developer, will speak at 10AM Sunday about SQL Developer Data Modeler. Our free data modeling solution allows one to reverse engineer a data dictionary to a model, modify it, and create a script of the changes. Collaboration is an important part of any development team; with built-in subversion support, the modeler makes collaboration easy, not just possible. After the morning break, I’ll be talking about SQL Developer’s PL/SQL support. From creating your code, to debugging, tuning, testing, and documenting PL/SQL – SQL Developer fits the bill. Since I have a full hour, I should have time to do a little riff on using source control to version and manage your revisions too! At 3:15 Jagan Athreya will talk about the new integration between SQL Developer and Enterprise Manager Cloud Control 12c. Enabling developers to define changes in SQLDeveloper and allowing DBAs to promote these changes to Test and Production via Enterprise Manager will reduce errors, accelerate productivity, and help eliminate unplanned downtime. Get your SQL Developer groove on at ODTUG Kscope12! Presentations SQL Developer Tips and Tricks Monday June 25, Session 5, 4:15 pm – 5:15 pm I’ll take you through my favorite keyboard shortcuts, top 10 preferences every user should tweak, and spotlight features that the average user probably hasn’t discovered yet. My goal for this session is for everyone to take 1-2 tips they can implement immediately to save mucho time. I enjoy interacting with the audience so no two versions of this presentation are the same. Oracle SQL Developer and Data Modeler New Features When: Tuesday June 26, Session 6, 8:30 am – 9:30 am Ashley Chen, my PM-partner-in-crime, will be covering all the new features from our two latest updates. So if you’re new to SQL Developer, or you’ve been using an older version, stop by and see what new toys you have to play with. I also have a bet with Ashley that she will have more attendees than me, so be sure to show up so I can collect. Debugging PL/SQL With SQL Developer When: Wednesday June 27, Session 16, 3:00 pm – 4:00 pm Me again – sorry. This time I have an entire hour to JUST talk about PL/SQL and debugging! Should you use a watch with a break condition, or a breakpoint with a passcount? How does external debugging with a Perl script work? Can I just debug an anonymous PL/SQL block. So if debugging to you is just a DBMS_OUTPUT.PUT_LINE() call, stop by and see how our IDE can help you take things to the next level! Or is that level++? Hands-on-Training SQL Developer Soup to Nuts When: Tuesday, 8:00 AM – 9:30 AM If you learn by doing, this is the session for you. Bring your own laptop or use one of the lab machines. We’ll give you a VirtualBox OEL image running 11gR2 EE Database with all the fixin’s (that’s Southern speak for Partitioning, Advanced Compression, Tuning & Diagnostic Packs, etc), TimesTen, APEX and much more. All you have to do is login and run through our lab exercises. You can start with a model and work your way up to debugging and testing your own appliction, or you can pick and choose your lessons to suit your needs. We’ll have people on hand to help you out and answer your questions. Booth Hours We’ll be in the vendor area and have our very own ‘demo pod’ for SQL Developer. Between Kris, Ashley, and I we should be able to answer your questions or show you how to ‘do that thing’ in the tool. Or just stop by and say hello! We’ll be around the following hours’ish: Sunday, June 24, 2012 6:00 PM – 8:00 PM Monday, June 25, 2012 9:00 AM – 4:30 PM Tuesday, June 26, 2012 9:30 AM – 3:30 PM Wednesday, June 27, 2012 10:15 AM – 2:00 PM No Excuses – If You Have Questions, This is Your Chance to Get Your Answers! We’re doing just about everything outside of a scavenger hunt to bring information and value to our users. Let us know what you like, what you don’t like, and we’ll do our best to do more of the former and less of the latter!

  Read the article

• Silent application installation script

  - by Achu

  I use the following script to install application from the server: ECHO OFF IF EXIST "C:\SCRIPTS\drvsw01.cmd" GOTO :L1 C: LABEL System_Drive CD\ MD SCRIPTS COPY U:\Scripts\*.* C:\SCRIPTS\ install.exe -i silent -DLICENSE_ACCEPTED=true -f response_file ECHO "SCRIPTS FOLDER INSTALLATION SUCCESSFUL" :L1 ECHO "JAVA INSTALLATION" U:\Softwares\Java_Run_Time\jre-6u26-windows-i586.exe ECHO "JAVA INSTALLATION SUCCESSFUL" ECHO "OFFICE SOFTWARE INSTALLATION" ECHO "MS OFFICE INSTALLATION" U:\Softwares\Office_2007\setup.exe ECHO "MS-OFFICE INSTALLATION SUCCESSFUL" U:\Softwares\SaveAsPDFandXPS.exe ECHO "MS-OFFICE PDF%XPS Add in INSTALLATION SUCCESSFUL" ECHO "NETWORK SCAN GEAR INSTALLATION" U:\Softwares\ScanGear\english\DISK1\setup.exe ECHO "NETWORK SCAN GEAR INSTALLATION SUCCESSFUL" ECHO "7ZIP INSTALLATION" U:\Softwares\7ZIP\7z457.EXE E CHO "7ZIP INSTALLATION SUCCESSFUL" ECHO "IFAN VIEW INSTALLATION" U:\Softwares\IrfanView_4.5\iview425_setup.exe ECHO "IFAN VIEW INSTALLATION SUCCESSFUL" U:\Softwares\IrfanView\irfanview_plugins_425_setup.exe ECHO "IFAN VIEW PLUGINS INSTALLATION SUCCESSFUL" U:\Softwares\Firefox4\Firefox4.exe ECHO "FIREFOX INSTALLATION SUCCESSFUL" ECHO "FIREFOX PLUGIN INSTALLATION" U:\Softwares\Flash_Player_10\install_flash_player.EXE U:\Softwares\Flash_Player_10\install_flash_player_10_active_x.exe ECHO "FIREFOX INSTALLATION SUCCESSFUL" ECHO "ACROBAT READER 10 INSTALLATION" U:\Softwares\Adobe_Acrobat_Reader_10\AdbeRdr10.exe ECHO "ACROBAT 10 Installation SuccESSFUL" ECHO "INSTALLATION CD burner WINDOWS XP" U:\Softwares\CDburnerxpsetup.exe ECHO "Installation of CD burner Successful" ECHO "INSTALLATION IE8 for WINDOWS XP" U:\SOFTWARE\IE8\IE8-WindowsXP-x86-ENU.exe ECHO "INSTALLATION IE8 SUCCESSFUL" ECHO "THE USER ACCOUNT WOULD BE DELETED" NET USER USER /DELETE ECHO "USER ACCOUNT DELETE SUCCESSFUL" echo %ERRORLEVEL% Now, i want to make this script installing everything silently except MS-Office. Ms-Office b/c i have to customize installing only word, excel & powerpoint. How can i make this script silent? or are there a nice script for this? Thanks,

  Read the article

• remote telnet and email

  - by Mustafa Ismail Mustafa

  This issue has been occupying my work for the last few days and I will be understating when I say its driven me up the blasted walls. Essentially, I can ping and tracert the domain jnrcs.org and the subdomains mail.jnrcs.org and mail.jordanredcrescent.org. All three mentioned point to ip address 212.38.147.97. About 4 days ago, when we registered the domain "jnrcs.org" suddenly all external connection to the mail server from outside was lost. Not just mail, but other http based port-forwarded or natted services (such as camera surveillance and pbx services). I tried good old telnet (I'm a linux user) and I get the following output: telnet> o mail.jnrcs.org 25 Trying 212.38.147.97... telnet: Unable to connect to remote host: No route to host telnet> Tracert gives me: traceroute to mail.jnrcs.org (212.38.147.97), 30 hops max, 60 byte packets 1 192.168.1.2 (192.168.1.2) 0.869 ms 0.944 ms * 2 * * * 3 * * * 4 * * * 5 * * * 6 * 212.38.128.118 (212.38.128.118) 33.875 ms 39.187 ms 7 * * * 8 * * * 9 * * * 10 * * * 11 * * 212.38.147.97 (212.38.147.97) 67.621 ms I am stumped. Other friends from all around the world can telnet no problem. What could have possibly happened to make telnet/smtp/pop/imap/http access stop? Please bear in mind I'm primarily a developer but I [am under the delusion] that I can carry my weight in IT administration :) TIA

  Read the article

• Mpd as pppoe server with authorisation by freeradius2

  - by Korjavin Ivan

  I install freeradius2, add to raddb/users: test Cleartext-Password := "test1" Service-Type = Framed-User, Framed-Protocol = PPP, Framed-IP-Address = 10.36.0.2, Framed-IP-Netmask = 255.255.255.0, start radiusd, and check auth: radtest test test1 127.0.0.1 1002 testing123 Sending Access-Request of id 199 to 127.0.0.1 port 1812 User-Name = "test" User-Password = "test1" NAS-IP-Address = 127.0.0.1 NAS-Port = 1002 Message-Authenticator = 0x00000000000000000000000000000000 rad_recv: Access-Accept packet from host 127.0.0.1 port 1812, id=199, length=44 Service-Type = Framed-User Framed-Protocol = PPP Framed-IP-Address = 10.36.0.2 Framed-IP-Netmask = 255.255.255.0 Works fine. Next step. Add to mpd.conf: radius: set auth disable internal set auth max-logins 1 CI set auth enable radius-auth set radius timeout 90 set radius retries 2 set radius server 127.0.0.1 testing123 1812 1813 set radius me 127.0.0.1 create link template L pppoe set link action bundle B set link max-children 1000 set link no multilink set link no shortseq set link no pap chap-md5 chap-msv1 chap-msv2 set link enable chap set pppoe acname Internet load radius create link template em1 L set pppoe iface em1 set link enable incoming And trying to connect, auth failed, here is mpd log: mpd: [em1-2] LCP: auth: peer wants nothing, I want CHAP mpd: [em1-2] CHAP: sending CHALLENGE #1 len: 21 mpd: [em1-2] LCP: LayerUp mpd: [em1-2] CHAP: rec'd RESPONSE #1 len: 58 mpd: [em1-2] Name: "test" mpd: [em1-2] AUTH: Trying RADIUS mpd: [em1-2] RADIUS: Authenticating user 'test' mpd: [em1-2] RADIUS: Rec'd RAD_ACCESS_REJECT for user 'test' mpd: [em1-2] AUTH: RADIUS returned: failed mpd: [em1-2] AUTH: ran out of backends mpd: [em1-2] CHAP: Auth return status: failed mpd: [em1-2] CHAP: Reply message: ^AE=691 R=1 mpd: [em1-2] CHAP: sending FAILURE #1 len: 14 mpd: [em1-2] LCP: authorization failed Then i start freeradius as radiusd -fX, and get this log: rad_recv: Access-Request packet from host 127.0.0.1 port 46400, id=223, length=282 NAS-Identifier = "rubin.svyaz-nt.ru" NAS-IP-Address = 127.0.0.1 Message-Authenticator = 0x14d36639bed8074ec2988118125367ea Acct-Session-Id = "815965-em1-2" NAS-Port = 2 NAS-Port-Type = Ethernet Service-Type = Framed-User Framed-Protocol = PPP Calling-Station-Id = "00e05290b3e3 / 00:e0:52:90:b3:e3 / em1" NAS-Port-Id = "em1" Vendor-12341-Attr-12 = 0x656d312d32 Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Client-Endpoint:0 = "00:e0:52:90:b3:e3" User-Name = "test" MS-CHAP-Challenge = 0xbb1e68d5bbc30f228725a133877de83e MS-CHAP2-Response = 0x010088746ae65b68e435e9d045ad6f9569b60000000000000000b56991b4f20704cb6c68e5982eec5e98a7f4b470c109c1b9 # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop [mschap] Found MS-CHAP attributes. Setting 'Auth-Type = mschap' ++[mschap] returns ok [eap] No EAP-Message, not doing EAP ++[eap] returns noop [files] users: Matched entry DEFAULT at line 172 ++[files] returns ok Found Auth-Type = MSCHAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group MS-CHAP {...} [mschap] No Cleartext-Password configured. Cannot create LM-Password. [mschap] No Cleartext-Password configured. Cannot create NT-Password. [mschap] Creating challenge hash with username: test [mschap] Client is using MS-CHAPv2 for test, we need NT-Password [mschap] FAILED: No NT/LM-Password. Cannot perform authentication. [mschap] FAILED: MS-CHAP2-Response is incorrect ++[mschap] returns reject Failed to authenticate the user. Login incorrect: [test] (from client localhost port 2 cli 00e05290b3e3 / 00:e0:52:90:b3:e3 / em1) Using Post-Auth-Type REJECT # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> test attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 2 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 2 Sending Access-Reject of id 223 to 127.0.0.1 port 46400 MS-CHAP-Error = "\001E=691 R=1" Why i have error "[mschap] No Cleartext-Password configured. Cannot create LM-Password." ? I define cleartext-password in users. I check raddb/sites-enabled/default authorize { chap mschap eap { ok = return } files } looks ok for me. Whats wrong with mpd/chap/radius ?

  Read the article

• Parralelization in Microsoft SQL Server 2008 R2

  - by stan31337

  We have a specific accounting and production software, called 1C, which uses single user connection to the MS SQL 2008 R2 database. And there are about 500 users connecting to 1C server to perform their tasks. 1C and SQL 2008 are on separate servers. How to configure MS SQL 2008 R2 to effectively use parallelization in this configuration? We have 24 cores, and only one is loaded at 100% at MS SQL 2008 R2 server. We have already configured MS SQL max parallelizm from this MSDN article: http://msdn.microsoft.com/en-us/library/ms181007(v=sql.105).aspx Thank you!

  Read the article

• What does the number after 7-zip's -m switch mean?

  - by AndreKR

  7-zip has a command line switch to set the compression method, -m followed by a number, e.g. -m0=LZMA. What does the number (0 in the example) mean? Different numbers produce slightly different compression results and performance: time 7z -m0=LZMA -mx=9 -ms=on -mmt=off real 0m2.292s user 0m2.190s sys 0m0.080s time 7z -m1=LZMA -mx=9 -ms=on -mmt=off real 0m2.405s user 0m3.240s sys 0m0.070s time 7z -m0=LZMA -mx=9 -ms=on -mmt=on real 0m1.038s user 0m1.920s sys 0m0.150s time 7z -m1=LZMA -mx=9 -ms=on -mmt=on real 0m1.187s user 0m2.800s sys 0m0.130s

  Read the article

• No External Network Access Through Ubuntu VPN

  - by trobrock

  I have setup pptpd as my VPN server on Ubuntu Server 9.04, I am able to connect to the VPN from the client and can access the server's local network, but I am unable to connect to the external network via the VPN. If I login to the server via SSH: $ ping google.com PING google.com (74.125.67.100) 56(84) bytes of data. 64 bytes from gw-in-f100.google.com (74.125.67.100): icmp_seq=1 ttl=49 time=65.9 ms 64 bytes from gw-in-f100.google.com (74.125.67.100): icmp_seq=2 ttl=49 time=63.2 ms 64 bytes from gw-in-f100.google.com (74.125.67.100): icmp_seq=3 ttl=49 time=63.9 ms 64 bytes from gw-in-f100.google.com (74.125.67.100): icmp_seq=4 ttl=49 time=66.0 ms If I connect to the VPN and ping locally: $ ping google.com ping: cannot resolve google.com: Unknown host I have a feeling it is some routing issue on the server but I am unsure.

  Read the article

• django sphinx automodule -- basics

  - by haras.pl

  Hi, I have a projects with several large apps and where settings and apps files are split. directory structure goes something like that: project_name __init__.py apps __init__.py app1 app2 3rdparty __init__.py lib1 lib2 settings __init__.py installed_apps.py path.py templates.py locale.py ... urls.py every app is like that __init__.py admin __init__.py file1.py file2.py models __init__.py model1.py model2.py tests __init__.py test1.py test2.py views __init__.py view1.py view2.py urls.py how to use a sphinx to autogenerate documentation for that? I want something like that for each in settings module or INSTALLED_APPS (not starting with django.* or 3rdparty.*) give me a auto documentation output based on docstring and autogen documentation and run tests before git commit btw. I tried doing .rst files by hand with .. automodule:: module_name :members: but is sucks for such a big project, and it does not works for settings Is there an autogen method or something? I am not tied to sphinx, is there a better solution for my problem?

  Read the article

• Retrieving a virtual box vdh that has been deleted from within Virtual box itself

  - by WillNZ

  I had a MS Virtual machine that I imported to virtual box to see how it worked. I decided that in this case MS Virtual machine worked just as good so removed the virtual machine from Virtual Box. In the process I accidently removed/deleted the vhd file that MS Virtual machine uses. Can I get this back from somewhere within virtual box or the recycle bin or do I have to use a undelete utlilty?

  Read the article

• Linq2SQL vs NHibernate performance (have I gone mad?)

  - by HeavyWave

  I have written the following tests to compare performance of Linq2SQL and NHibernate and I find results to be somewhat strange. Mappings are straight forward and identical for both. Both are running against a live DB. Although I'm not deleting Campaigns in case of Linq, but that shouldn't affect performance by more than 10 ms. Linq: [Test] public void Test1000ReadsWritesToAgentStateLinqPrecompiled() { Stopwatch sw = new Stopwatch(); Stopwatch swIn = new Stopwatch(); sw.Start(); for (int i = 0; i < 1000; i++) { swIn.Reset(); swIn.Start(); ReadWriteAndDeleteAgentStateWithLinqPrecompiled(); swIn.Stop(); Console.WriteLine("Run ReadWriteAndDeleteAgentState: " + swIn.ElapsedMilliseconds + " ms"); } sw.Stop(); Console.WriteLine("Total Time: " + sw.ElapsedMilliseconds + " ms"); Console.WriteLine("Average time to execute queries: " + sw.ElapsedMilliseconds / 1000 + " ms"); } private static readonly Func<AgentDesktop3DataContext, int, EntityModel.CampaignDetail> GetCampaignById = CompiledQuery.Compile<AgentDesktop3DataContext, int, EntityModel.CampaignDetail>( (ctx, sessionId) => (from cd in ctx.CampaignDetails join a in ctx.AgentCampaigns on cd.CampaignDetailId equals a.CampaignDetailId where a.AgentStateId == sessionId select cd).FirstOrDefault()); private void ReadWriteAndDeleteAgentStateWithLinqPrecompiled() { int id = 0; using (var ctx = new AgentDesktop3DataContext()) { EntityModel.AgentState agentState = new EntityModel.AgentState(); var campaign = new EntityModel.CampaignDetail { CampaignName = "Test" }; var campaignDisposition = new EntityModel.CampaignDisposition { Code = "123" }; campaignDisposition.Description = "abc"; campaign.CampaignDispositions.Add(campaignDisposition); agentState.CallState = 3; campaign.AgentCampaigns.Add(new AgentCampaign { AgentState = agentState }); ctx.CampaignDetails.InsertOnSubmit(campaign); ctx.AgentStates.InsertOnSubmit(agentState); ctx.SubmitChanges(); id = agentState.AgentStateId; } using (var ctx = new AgentDesktop3DataContext()) { var dbAgentState = ctx.GetAgentStateById(id); Assert.IsNotNull(dbAgentState); Assert.AreEqual(dbAgentState.CallState, 3); var campaignDetails = GetCampaignById(ctx, id); Assert.AreEqual(campaignDetails.CampaignDispositions[0].Description, "abc"); } using (var ctx = new AgentDesktop3DataContext()) { ctx.DeleteSessionById(id); } } NHibernate (the loop is the same): private void ReadWriteAndDeleteAgentState() { var id = WriteAgentState().Id; StartNewTransaction(); var dbAgentState = agentStateRepository.Get(id); Assert.IsNotNull(dbAgentState); Assert.AreEqual(dbAgentState.CallState, 3); Assert.AreEqual(dbAgentState.Campaigns[0].Dispositions[0].Description, "abc"); var campaignId = dbAgentState.Campaigns[0].Id; agentStateRepository.Delete(dbAgentState); NHibernateSession.Current.Transaction.Commit(); Cleanup(campaignId); NHibernateSession.Current.BeginTransaction(); } Results: NHibernate: Total Time: 9469 ms Average time to execute 13 queries: 9 ms Linq: Total Time: 127200 ms Average time to execute 13 queries: 127 ms Linq lost by 13.5 times! Event with precompiled queries (both read queries are precompiled). This can't be right, although I expected NHibernate to be faster, this is just too big of a difference, considering mappings are identical and NHibernate actually executes more queries against the DB.

  Read the article

• Windows 8 ignores more specific route

  - by Lander

  OS: Windows 8 I have a cabled NIC (connected to router with ip 192.168.1.0) and a WIFI NIC (connected to a router with ip 192.168.1.1) . I want all traffic to go through the cabled NIC, except the 192.168.1.0/8 range should use the wifi-nic. This was working fine in Windows 7, without any manual configuration. In Windows 8 however, it's not. My routing table: =========================================================================== Interface List 14...f2 7b cb 13 e7 f0 ......Microsoft Wi-Fi Direct Virtual Adapter 13...b8 ac 6f 54 d2 5c ......Realtek PCIe FE Family Controller 12...f0 7b cb 13 e7 f0 ......Dell Wireless 1397 WLAN Mini-Card 1...........................Software Loopback Interface 1 15...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 16...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.198 30 0.0.0.0 0.0.0.0 192.168.0.1 192.168.0.233 20 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.0.0 255.255.255.0 On-link 192.168.0.233 276 192.168.0.233 255.255.255.255 On-link 192.168.0.233 276 192.168.0.255 255.255.255.255 On-link 192.168.0.233 276 192.168.1.0 255.255.255.0 192.168.1.1 192.168.1.198 31 192.168.1.198 255.255.255.255 On-link 192.168.1.198 286 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.0.233 276 224.0.0.0 240.0.0.0 On-link 192.168.1.198 286 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.0.233 276 255.255.255.255 255.255.255.255 On-link 192.168.1.198 286 =========================================================================== Persistent Routes: None I added the rule for 192.168.1.0. I would think Windows should use this rule for the IP 192.168.1.1 because it's more specific than the default-route. However it's not: C:\Windows\system32>tracert 192.168.1.1 Tracing route to 192.168.1.1 over a maximum of 30 hops 1 58 ms 4 ms 4 ms 192.168.0.1 2 68 ms 12 ms 11 ms ^C So... What do I do wrong? And how can I make Windows use the wireless NIC for 192.168.1.0/8

  Read the article

< Previous Page | 97 98 99 100 101 102 103 104 105 106 107 108  | Next Page >