Search Results

Search found 4345 results on 174 pages for 'partition'.

Page 101/174 | < Previous Page | 97 98 99 100 101 102 103 104 105 106 107 108  | Next Page >

  • Recover data from hard drive with partitions (but not most data) overwritten

    - by Macha
    I have a 500GB hard drive I've been keeping around to recover data from that I removed from a failing NAS drive that got sort of... erratic at the end. I finally got rid of the NAS when during a firmware update it removed the partition table. Fast forward to a week ago, when I was building a new PC, and a mixup resulted in me placing the hard drive in question in the new PC and installing Windows XP on the first 100GB. I'm presuming any data on that first 100GB is now gone, but for the rest of it, is there any way I can recover it at home, as professional data recovery is currently too expensive? I have a blank 1TB HDD if I can store any images of that hard drive on. The problem was definitely with the NAS and not the hard drive, as the hard drive had a successful install of Windows when mistakenly place in the new PC, and there were capacitors in the NAS's circuitry clearly broken. The data I want to recover (in order of priority) is: High: Some jpgs of family photos. Medium: Some RAW files. (There are also jpg versions of all of these) Low: Some mp3s, avis and ISOs, I can re-rip most of these if need be, but it'd be handy not to have to. (I don't need a backup lecture, and if you can hold it in from nagging Jeff Atwood for it, you can hold it in from nagging me for it) In short: The partition tables are gone and overwritten. The data is not overwritten, except for an amount equal to the size of a Windows XP SP3 installation.

    Read the article

  • How do you recreate the System Recovery environment in Windows 7?

    - by Howiecamp
    I'm running Windows 7 Home Premium RTM (64-bit) and I want to take advantage of the system recovery tools (eg the Command Prompt) without using the Windows 7 DVD. My understanding is that this environment (WinRE) should be installed to your HDD by default as part of the Windows 7 installation. However, when I hit F8 on boot and select "Repair", I get: Windows failed to start. A recent hardware or software change might be the cause. To fix the problem... Status: 0xc000000e Info: The boot selection failed because a required device is inaccessible. The "Info" line seems like the smoking gun. My next step was to boot from the Windows 7 DVD, and choose "Repair". It indicated my Recovery Environment wasn't on the Windows 7 boot menu (perfect) and offered to fix it. I said yes and rebooted, however same issue as above. In addition, when I booted in to Windows 7 and I looked at the boot menu options, the recovery/repair option was not there. Only my Windows installation. Finally, I ran the Disk Management tool (diskmgmt.msc) and took a look at the contents of my "System Reserved" partition (which was set to "Active" as normal). It's unclear to me what the contents should look like, however it is my understanding that the WinRE environment gets installed to this partition. (As part of the above troubleshooting I followed http://superuser.com/questions/25728/how-to-fix-windows-7-boot-process which lead to http://www.sevenforums.com/tutorials/668-system-recovery-options.html).

    Read the article

  • RAID degraded on Ubuntu server

    - by reano
    We're having a very weird issue at work. Our Ubuntu server has 6 drives, set up with RAID1 as follows: /dev/md0, consisting of: /dev/sda1 /dev/sdb1 /dev/md1, consisting of: /dev/sda2 /dev/sdb2 /dev/md2, consisting of: /dev/sda3 /dev/sdb3 /dev/md3, consisting of: /dev/sdc1 /dev/sdd1 /dev/md4, consisting of: /dev/sde1 /dev/sdf1 As you can see, md0, md1 and md2 all use the same 2 drives (split into 3 partitions). I also have to note that this is done via ubuntu software raid, not hardware raid. Today, the /md0 RAID1 array shows as degraded - it is missing the /dev/sdb1 drive. But since /dev/sdb1 is only a partition (and /dev/sdb2 and /dev/sdb3 are working fine), it's obviously not the drive that's gone AWOL, it seems the partition itself is missing. How is that even possible? And what could we do to fix it? My output of cat /proc/mdstat: Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md1 : active raid1 sda2[0] sdb2[1] 24006528 blocks super 1.2 [2/2] [UU] md2 : active raid1 sda3[0] sdb3[1] 1441268544 blocks super 1.2 [2/2] [UU] md0 : active raid1 sda1[0] 1464710976 blocks super 1.2 [2/1] [U_] md3 : active raid1 sdd1[1] sdc1[0] 2930133824 blocks super 1.2 [2/2] [UU] md4 : active raid1 sdf2[1] sde2[0] 2929939264 blocks super 1.2 [2/2] [UU] unused devices: <none> FYI: I tried the following: mdadm /dev/md0 --add /dev/sdb1 But got this error: mdadm: add new device failed for /dev/sdb1 as 2: Invalid argument Output of mdadm --detail /dev/md0 is: /dev/md0: Version : 1.2 Creation Time : Sat Dec 29 17:09:45 2012 Raid Level : raid1 Array Size : 1464710976 (1396.86 GiB 1499.86 GB) Used Dev Size : 1464710976 (1396.86 GiB 1499.86 GB) Raid Devices : 2 Total Devices : 1 Persistence : Superblock is persistent Update Time : Thu Nov 7 15:55:07 2013 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 0 Spare Devices : 0 Name : lia:0 (local to host lia) UUID : eb302d19:ff70c7bf:401d63af:ed042d59 Events : 26216 Number Major Minor RaidDevice State 0 8 1 0 active sync /dev/sda1 1 0 0 1 removed

    Read the article

  • Using Truecrypt to secure mySQL database, any pitfalls?

    - by Saul
    The objective is to secure my database data from server theft, i.e. the server is at a business office location with normal premises lock and burglar alarm, but because the data is personal healthcare data I want to ensure that if the server was stolen the data would be unavailable as encrypted. I'm exploring installing mySQL on a mounted Truecrypt encrypted volume. It all works fine, and when I power off, or just cruelly pull the plug the encrypted drive disappears. This seems a load easier than encrypting data to the database, and I understand that if there is a security hole in the web app , or a user gets physical access to a plugged in server the data is compromised, but as a sanity check , is there any good reason not to do this? @James I'm thinking in a theft scenario, its not going to be powered down nicely and so is likely to crash any DB transactions running. But then if someone steals the server I'm going to need to rely on my off site backup anyway. @tomjedrz, its kind of all sensitive, individual personal and address details linked to medical referrals/records. Would be as bad in our field as losing credit card data, but means that almost everything in the database would need encryption... so figured better to run the whole DB in an encrypted partition. If encrypt data in the tables there's got to be a key somewhere on the server I'm presuming, which seems more of a risk if the box walks. At the moment the app is configured to drop a dump of data (weekly full and then deltas only hourly using rdiff) into a directory also on the Truecrypt disk. I have an off site box running WS_FTP Pro scheduled to connect by FTPs and synch down the backup, again into a Truecrypt mounted partition.

    Read the article

  • Microsoft Deployment Toolkit 2012 Error

    - by Jacob Schaer
    I just started with MDT2012 recently in hopes of eventually getting away with using Ghost to deploy all of our department computers. When I test deploy in VirtualBox, it deploys the OS properly, but stops because of a network driver failure (it gets the "could not allocate resources" issue). On physical hardware (Latitude E6500, Optiplex 980, and an older Latitude) it gets through the multicast and stops immediately after with: "Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information" I've looked at the logs and never see anything really of note. Originally I was using DriverPacks from DriverPacks.net, but thinking it was a driver issue, I switched over to using Dell's cab driver packs. Still the same issue. I check and it did the HDD is all fine - it was properly partitioned, set to bootable, and was loaded with all the proper OS installer files. I'm using a flash drive to do the install - when I make changes to the deployment share I rebuild and copy the ISO to the drive, then use YUMI multiboot to start the ISO (probably irrelevant).

    Read the article

  • Cloning a failing disk (Win 7)

    - by daveh551
    I have a Windows 7 machine with several partitions on a 1.5T drive. Windows has been complaining about disk errors and imminent failure, so I have purchased a new 2TB drive. The failing disk has not completely failed, and, in fact, I was able to boot Windows from it (after a couple tries) and examine the SMART logs - the only RED item was 1 sector being reallocated. But when I try to Clone it to the new Drive using Acronis True Image Home (2010), True Image can see the drive, the partitions, and the contents, but when it goes to actually do the clone, it says "Failed to move. Make sure the destination disk is not smaller than the source disk, and that there are not errors on the disk" (or something like that). What are some other options for simply cloning the failing drive. I'd like to clone the entire disk, but am willing to do it partition by partition if necessary. Was this a known failing of the 2010 edition of ATI, or is it really something hosed in my system. Would upgrading to the 2012 edition be likely to work any better? (I'd download the trial and try it out, but if I remember right, the cloning operation is disabled in the trial version), and I don't have enough free disk space to make an entire image.) What are some other cloning software packages if ATI won't work? Note that I'm only looking to clone the disk, not make an image as a back up - I use Ghost for that, and can fall back to that if I have to. It looks to me like CloneZilla would do the job. Any recommendations? Thanks, and if this duplicates other questions, I apologize.

    Read the article

  • Grub rescue, unknown file system. Can't boot into Windows 7

    - by Sam J
    So, I'm confused, so I'm also going to use this question to get clarification and fix my computer. So, some background: I had Windows 7 on a 1 TB HDD and decided to partition my hard drive into two ~500 GB, one for Windows 7 and one for Ubuntu or whatever flavour I desired (like a sandbox partition...) I installed Ubuntu but the installation had issues so I decided to uninstall. Note before uninstallation I had to press f12 when I turned on to boot from my primary HDD, then choose what OS I wanted to use. Undesirable, but it worked. Anyway, after I decided to uninstall Ubuntu I went into Windows 7 Start Computer Manage and deleted the EXT4 filesystem (Ubuntu parition) giving me 4xx GB of free space. However when I restarted Windows 7, I am now unable to boot Windows. When I DON'T hit f12, I see a blank screen with a flashing underscore. When I DO hit f12, I choose my primary HDD, and then I get a GRUB error: Unknown filesystem: grub rescue _ Something I'm unclear of: GRUB boots linux partitions, right? What boots Windows? Is GRUB "overwriting" the Windows bootloader? How can I completely get Windows back to normal? (IE, It boots automatically without hitting f12.) Thanks for any help, I'm on a live CD version of Ubuntu right now until I can get back on Windows.

    Read the article

  • Lost Windows 7 boot after EasyBCD with EFI

    - by drent
    I've got a Lenovo Y580 with a 64GB SSD and a 1TB HDD setup using GPT and setup to boot from (U?)EFI. I was trying to get my Linux Mint installation on the Windows boot manager using EasyBCD (I didn't realise EFI but it wiped my boot partition/loader and I cannot seem to get Windows back (and I still can't get a bootable Linux Mint). Using the System Recovery utility, Startup Repair can't "see" windows (it might be because I'm using a 7 Pro disk to recover Home Premium?). In command prompt, Bootrec tools don't do anything and bootsect can't run because it says that it's for BIOS only and I've booted with EFI. I can see the EFI data on the 200mb SSD partition using diskpart but I don't know how to add Windows back onto whatever bootloader I have/need. At the moment the only options I can see are: Do a fresh install of Windows and hope that the setup remains as fast as the default one (the SSD is some kind of cache for Windows but I can't quite see how it works given that the rest of the SSD is unpartitioned space). This seems like overkill given that Windows was working fine til EasyBCD deleted it. Try forcing BIOS mode and see if that somehow magically fixes things Try converting from GPT to MBR to try and use the bootrec/bootsect tools (and maybe back again) which seems like a really bad idea. Anyone have any ideas?

    Read the article

  • Unnamed, hidden partitions on my 500 GB HD, HP Pavilion dm4 Laptop

    - by emotionull
    I have multiple doubts here. Its a Seagate 500GB 7200RPM HD. I had installed it few months back after my original Laptop HD stopped working. The current drives on my latop, as shown by the Windows Disk Management are: After installing the new HD, I had done a complete clean install of Windows 7 and I didn't create any parition myself, manually. So there are 4 drives. Even previously, before I installed this new HD, my laptop had 4 Partitions. But the there were no un-named partitions like the two in this case. The other two were HP tools and Recovery or something. It was pre-configured, Factory installed Windows. Also, now when I right cick on the unnamed Drives from Disk Management, all the options are greyed out (see image) except the delete partition image. So how do I know what's inside those partitions? Will it be ok if I delete them? I want install Ubuntu and dual boot it with my current windows installation. I cannot do it in current setup as there are already 4 partitions of my HD and if I will try to make a new partition, it will be a logical one (correct me if I am wrong here). So can I delete the un-named, hidden partitions and use them for Ubuntu? A bit unrelated question. As a backup option, can I use the Windows 7's Backup and Restore facility to keep a complete backup of all the drivers and system softwares.

    Read the article

  • Dual boot Windows 8 and Ubuntu 12.10 across a reboot

    - by AK4749
    My Setup: I have two separate SSDs, and each contains an independently bootable OS - W8 and U12.10. From my extremely limited knowledge, this means each has a functioning EFI partition(?). My default boot order (GA-Z68XP-UD3P mobo with UEFI firmware update) boots the UEFI partition containing windows first, but if I enter the BIOS I can select the "ubuntu" entry to successfully boot ubuntu. Both drives are GPT, and are EFI boots. What I want to do: Reboot Windows 8, re-enter W8 (this is happening now due to the default boot order). What I want to change, however, is to boot into Ubuntu if i reboot from ubuntu. Essentially, I would like to work within one OS unless I consciously choose otherwise. Normally, I would not even ask to something I thought was impossible, but... Why I think this is possible: When trying EasyBCD to add ubuntu to the W8 UEFI bootloader, I noticed an "iReboot" addon or something that allows you to select which OS to boot into from within the OS. Note that I ended up not using the NeoGrub entry to chain Ubuntu off the W8 bootloader because I couldn't get much help with it. Is this possible? Have I had too much coffee and gone insane? Thank you all for your time, AK

    Read the article

  • Windows Server 2003 (w/Exchange) move to new machine

    - by James Booker
    I have an ageing domain controller (the only one on a 10-pc network) which needs rebooting often. I have a Dell Poweredge 2850 server doing nothing, so I'd like to move the DC to that, but here's the catch - I don't have Win2k Server Std install media any more as it's been lost. I purchased "Easus Todo Backup Advanced Server" which claims to be able to recover to dissimilar metal, but it's not quite working (although I don't think it's the product's fault) I know the server and PERC RAID card are good because I installed Ubuntu on the logical drive (4 x 72GB disks RAID 5) no problems. I've booted frmo the Easus Todo backup CD (which is WinPE based) and recovered to the logical disk on the RAID (after installing driver inside the WinPE environment from a NAS drive) The problem is when I boot the server, I can get the OS selection menu, but any option results in a blank screen, with no errors. I figure this is probably because the driver wasn't installed on the old machine (which is IDE-based (i know, i know!) and doesn;t have a RAID controller) I've booted from the CD and copied the mraid35x.sys file to the c:\windows\system32\drivers folder on the recovered system, but it makes no difference. I made a boot.ini with rdisks 0-10 defined, and booting from each of these resulted in a file error (i.e. 'this isn't a real disk') - the only disk that gets any response (the blank screen) is multi(0)disk(0)rdisk(0)partition(1) which just gives me the blank black screen and no disk activity. Is there any way I can force the drvier to be installed on the source system (so i can do a full backup again), i've tried right-clicking the oemsetup.inf and clicking install, but it didn't actually do anything. I attempted to force it with the 'Add new hardware' wizard and forcing with the 'have disk' option but it still gave me no hardware to select. Also I've got an identical machine running WinXP which uses the PERC driver successfully (which was obviously done at install time) and the boot.ini settings are the same : multi(0)disk(0)rdisk(0)partition(1) Any ideas would be appreciated.

    Read the article

  • Diff bios - corrupt video driver

    - by sfonck
    Hi, I'm using an Dell M90 Precision Laptop which has a NVidia Quadro FX 2500M graphics card and is running Windows XP. Laptop has been running fine - but a few weeks ago screen went 'white' - restarted computer- bios and startup screens show weird green dots and stripes, normal startup only shows a black screen... only VGA mode works to display something. I've been trying to remove and reinstall the correct drivers downloaded from Dell's website - no solution. I gave up and reinstalled XP - everything was working perfect again. 2 weeks later - again the white screen - tried everything again (flashin new bios also - nothing works) Reinstalled XP - everyhting was working again, so I made a DriveSnapShot of the partition. Today - again the 'white screen'. Ok, no problem ...I was thinking all I needed to do was to restore the DriveSnapShot backup... Few minutes later the backup is restored ... but guess what: video driver does not work correctly... As the DriveSnapShot restored the complete partition, as it was at the time everything was working perfectly, this would mean my driver problems are due to 'settings' in the bios or on the graphics-card itself + these 'settings' can get overridden by doing a new XP-install.... I'm out of options, can somebody help me to find a solution for this problem: Is there some way to backup and restore a bios after seeing some problems? Is there some way to know what is causing this problem like a bios diff utility? Thanks!

    Read the article

  • I (stupidly) converted a TrueCrypt encrypted disk to GPT in Disk Management: now TrueCrypt won't mount it

    - by asilentfire
    Backstory: After moving a Macrium Reflect disk image from my TrueCrypt external drive (with whole disk encryption) onto a unencrypted drive and using Windows PE with Macrium Reflect to restore my internal disk to the recovery image on the external unencrypted drive, my Windows 8 failed to boot. I then went back and also recovered the System Partition (looking now, it is currently EFI), but I still couldn't boot into my backup.. I was in a hurry to get online for something so I just did a clean install of Windows 8, without the backup.. After I installed Windows 8, I went into Disk Management out of curiosity to see if there were other partitions with Windows 8 that Macruim might have missed, and there is (by default) a Recovery Partition of 100MB. My memory of this is hazy, as I was trying to get up and running for an exam at 4 AM: Something in Disk Management prompted me to convert my encrypted external drive to GPT.. I have no idea why I did this, but I went ahead and allowed it to convert my TrueCrypt drive to GPT. Now, I can't mount the drive in TrueCrypt.. Disk Management sees it as Disk 1, Basic, and Unallocated. I tried converting it back to MBR with Disk Management, but no dice with TrueCrypt :( If I try to mount the disk in TrueCrypt I get the message: Incorrect password or not a TrueCrypt volume I should never have messed with a Truecrypt drive in Disk Management, but I did. I have important college work in that drive, and fear I have lost it forever. PLEASE HELP

    Read the article

  • Best format for hard drive for Windows and Mac?

    - by Neil
    I have a 500 GB USB External Hard Drive. I need four partitions on it, for the following purposes: 160 GB for a bootable backup of my Mac. 160 GB for a bootable backup of my Windows. 11 GB for a bootable Snow Leopard Install Disk Rest as for file storage. Now I need a partition table which will get recognised on both Windows and Mac, without needing extra software on Windows, which will let me keep bootable copies of both OS'es, but let me access the file storage from both OS'es. Currently, I have a GUI Partition Table, with Mac OS Extended (Journaled) Partitions for the two backups, Mac OS Extended for the Install Disk, and NTFS for the file storage. While this gets recognised perfectly on my Mac, thanks to an NTFS for Mac driver from Paragon, when connected to Windows, the drive is detected by the machine (listed in Safely Remove USB), but not recognised in Windows Explorer unless I install MacDrive, which is not feasible for me to install on public Windows Machines I might wanna access my storage area on. Can someone recommend the best combination of formats and software/drivers to get this done seamlessly?

    Read the article

  • Corsair SSD appears completely blank and does not retain written data

    - by ebanders
    I have a 180GB Corsair SSD (model# CSSD-F180GB2-BRKT) as the primary drive in a Windows laptop. Recently the machine became unbootable after installing Windows updates. Windows installed updates before the machine shut down and the next time the machine boot up it complained about not being able to find a bootable device. After finding fixmbr unsuccessful at making the machine unbootable, I investigated a little within knoppix. Fdisk revealed an empty partition table. A scan by Testdisk came up empty. And finally 'head -c 1024 | hd' reveals all zeros. Creating a primary partition spanning the whole disk completes successfully, but after a reboot the disk appears empty again. dmesg reveals no read or write errors. smartctl indicates that the drive is healthy- although the SMART attribute values do not appear to be read properly. "Data Page | WARNING: PREVIOUS ATTRIBUTE HAS TWO" and "Threshold Page | INCONSISTENT IDENTITIES IN THE DATA" messages appear within the table of values. I don't have much experience with SSDs. Is this drive dead or something? Can anyone recommend any diagnostic tools that may be suited for diagnosing SSDs?

    Read the article

  • Concatenating gziped Apache logs

    - by markdrayton
    We rotate and compress our Apache logs each day but it's become apparent that this isn't frequently enough. An uncompressed log is about 6G, which is getting close to filling our log partition (yep, we'll make it bigger in the future!) as well as taking a lot of time and CPU to compress each day. We have to produce a gziped log for each day for our stats processing. Obviously we could move our logs to a partition with more space but I also want to spread the compression overhead throughout the day. Using Apache's rotatelogs we can rotate and compress the log more often -- hourly, say -- but how can I concatenate all the hourly compressed logs into a running compressed log for the day, without decompressing the previous logs? I don't want to uncompress 24 hours' worth of data and recompress it because that has all the disadvantages of our current solution. Gzip doesn't seem to offer any append or concatenate option but perhaps I've missed something obvious. This question suggests straight shell concatenation "works" in that the archive can be decompressed but that gzip -l doesn't work seems a bit dodgy. Alternatively, perhaps this is still a bad way to do things. Other suggestions are welcome -- our only constraints are our relatively small log partitions and the need to provide a daily compressed log.

    Read the article

  • Hungry hungry BIOS: why do I have less than 4 GiB of memory?

    - by Rhymoid
    I thought I had 4 GiB of memory, but just to be sure, let's ask the BIOS about that: ?: sudo dmidecode --type 20 # dmidecode 2.12 SMBIOS 2.6 present. Handle 0x000B, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0007FFFFFFF Range Size: 2 GB Physical Device Handle: 0x000A Memory Array Mapped Address Handle: 0x000E Partition Row Position: Unknown Interleave Position: Unknown Interleaved Data Depth: Unknown Handle 0x000D, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00080000000 Ending Address: 0x000FFFFFFFF Range Size: 2 GB Physical Device Handle: 0x000C Memory Array Mapped Address Handle: 0x000E Partition Row Position: Unknown Interleave Position: Unknown Interleaved Data Depth: Unknown Alright, 4 GiB it is. But I can't use all of it: ?: cat /proc/meminfo | head -n 1 MemTotal: 3913452 kB Somehow, somewhere, I lost 274 MiB. Where did 6% of my memory go? Now I know the address ranges in DMI are incorrect, because the ACPI memory map reports usable ranges well beyond the ending address of the second memory module: ?: dmesg | grep -E "BIOS-e820: .* usable" [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dee7bfff] usable [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000117ffffff] usable I get pretty much the same info from /proc/iomem (except for the 4 kiB hole 0x000-0xFFF), which also shows that the kernel only accounts for less than 8 MiB. I guess 0x00000000-0x7FFFFFFF is indeed mapped to the first memory module, and 0x80000000-0xDFFFFFFF to part of the second memory module (a bunch of ACPI NVS things live between 0xDEE7C000 and 0xDEF30FFF, and the remaining 16-something MiB of that range are just 'reserved'). I guess the highest 0x18000000 bytes of the second memory module are mapped above the 4 GiB mark. But even then, there are two problems: 128 MiB (0x08000000 bytes, living somewhere between 0xE0000000 and 0xFFFFFFFF) are still completely unaccounted for. To note, my graphics card is on PCI-Express and (allegedly) has 1 GiB dedicated memory, so that shouldn't be the culprit. Did the BIOS screw up in moving the memory, leaving it partially shadowed by MMIO? Even with this mediocre explanation, I only 'found' 128 MiB. But /proc/meminfo is reporting a much larger deficit; where's the other 146 MiB? How does Linux count MemTotal?

    Read the article

  • phpMyadmin issue on cpanel

    - by user1149244
    I logged in into our cpanel to view phpMyAdmin but I can't open it. It give me this error message: Warning: session_write_close() [function.session-write-close]: write failed: No space left on device (28) in /usr/local/cpanel/base/3rdparty/phpMyAdmin/index.php on line 42 Warning: session_write_close() [function.session-write-close]: Failed to write session data (files). Please verify that the current setting of session.save_path is correct (/var/cpanel/userhomes/cpanelphpmyadmin/sessions) in /usr/local/cpanel/base/3rdparty/phpMyAdmin/index.php on line 42 Warning: Cannot modify header information - headers already sent by (output started at /usr/local/cpanel/base/3rdparty/phpMyAdmin/index.php:42) in /usr/local/cpanel/base/3rdparty/phpMyAdmin/index.php on line 99 I contacted the support to assist me with. They just told me that the server is unmanaged. They told me to delete the free the partition but I don't know how to do it. I'm noob on that matter. The /var/log/btmp is over 8GB as they said. I want to delete that file. How would I do this? I need to free the space of the partition. I need some steps on how to do it and also steps on how to delete the /var/log/btmp. I have been googling around but I haven't found anything.

    Read the article

  • I really need help resolving a Window Vista BSOD (Blue Screen Crash) on my desktop

    - by anonymous
    Hi, thanks for taking the time to read this. I'll get straight to the details. My desktop is on the fritz; it keeps going to blue screen with the stop message of 0x0000007E immediately after the loading bar of vista, right before transitioning to the account selection screen. My desktop runs on a dual-core 32-bit processor with windows Vista Home(?) installed. I have 3 GB of ram as two separate modules, a 1GB acer module and a 2GB geil module. I have an ati video card, unfortunately I cannot recall the exact name but the chipset is ATI and the manufacturer is Sapphire and the card is on the lower end. My hard drive is 320GB (i think) partitioned into two. The C:\ partition is red lined, while the D:\ partition is still pretty empty. As per the advice of my friend, i tried restarting the system with the graphics card removed. Upon failure, i repeated the process removing one RAM module one at a time, but the system still failed to load. Vista would attempt to repair the system and it would initially report that the system was fixed, but vista really failed to fix the problem. After removing the memory modules, vista started to report it's inability to fix the problem. I tried running on safe mode and the driver listing would always stop at crcdisk.sys. I ran memory diagnostics using the windows memory diagnostic tool found in the screen after vista's failed attempt to fix the problem with no luck. the problem details are as such: Problem Event Name : StartupRepairV2 Problem Signature 01: AutoFailover 02: (vista's version number?) 03: 6 04: 720907 05: 0x7e 06: 0x7e 07: 0 08: 2 09: WrpRepair 10: 0 OS Version: 6.0.6000.2.0.0.256.1 Locale ID 1033 any correct advice would be appreciated as i really need my pc to work so i can work on my projects. kinda sad, but i'm college of computer science and i have no idea what to do :P

    Read the article

  • Install Windows 8 on SSD and Program & Users on HDD

    - by Foe
    I have been dealing with a few problems while installing Windows 8 on my computer. On my old configuration, I had Windows 7 installed on my 60Go SSD, and my programs and user data on my 1To HDD, thanks to relative links. Yet, while installing Windows 8 on my SSD, he made a small partition on my HDD "System related". Plus, I'm afraid using only links is a bit cheap, and I saw lots of people messing with their registry when trying to put user data on another drive. I read a lot about optimizing Windows 8 for SSD, putting Users on another drive, and very similar situation that didn't quite correspond to what I was trying to achieve. Here's what I tried : http://www.eightforums.com/tutorials/4275-user-profiles-relocate-another-partition-disk.html Booting on Audit mode and using an XML to relocate Users didn't work as the specified version in the file is a test one, and I don't what to enter if I'm using the last release. Booting with the install DVD in repair mode to do a copy of the User and create a relative link, resulting in an error on the logon screen while entering my password saying that "The profile can't be load" (average translation of my error from french to english) Do anyone know how to do a clean separated install of Windows 8, with OS on a drive, and the other data on a second one ? Thanks.

    Read the article

  • SSD won't boot anymore

    - by LordrAider
    Yesterday I put the computer to sleep. Something went wrong because it didn't go fully to sleep. So I restarted the pc and now it won't boot windows 7 anymore. It said : "Please insert valid boot device". I ran Windows 7 restore disc and tried restoring, first it said, mbr fixed. No result but now it said : "Operating system could not be loaded" I ran Windows 7 restore disc again and then it said something about a corrupt partition and that he fixed it. But got the same msg at restart about operating system not found. I ran Windows 7 restore disc again and used diskpart and watched the volumes. My SSD shows up as RAW filesystem... not as NTFS. The size of the disk seems correct. In the bios it also shows up as Healthy disk. What could went wrong and could I recover data with testdisk? I assume something went wrong with the partition :(. It's a Plextor SSD 256M2P SSD, only 3 months old. Thx in advance

    Read the article

  • How many bootable partitions are possible to have on one hard drive?

    - by draiden
    This may not be the correct place to post this; if that's the case, just let me know and point me in the right direction please! I'm thinking of building a box that needs to be lightweight and portable, and would need to be able to boot multiple installations of windows. I am needing to have multiple installations so that I can, for example, plug the box in to the network at one location, boot in to that location's partition, and have full access to everything I would normally need to do on a computer that has already been set up on that network. Then, when I go to the next client, I would be able to do the same thing, with the new location's partition, and have all of those network settings, drive mappings, etc., available there. Obviously I'd need to go through and set them all up on the different locations/networks, I'm not expecting it to magically know where I am and what I'm doing. It would be like I'm carrying around a computer that is configured for each place I need to go in one little box, instead of having to have multiple computers or having to reconfigure all the settings and such every time I go to another client. Or is there an easier way to do this that I haven't learned of?

    Read the article

  • Installing Debian 7.6.0 on Lenovo Y50

    - by Girauder
    I was trying to install Debian on my new laptop: a Lenovo Y50 64bit running Windows 8. I got together with a friend and installed Debian in his computer first and had no problems. However I've tried to install Debian several times using the AMD64 KDE and netinst versions and accomplished nothing. First try: installed the KDE version. Grub would let me choose which operating system I wanted, but when I selected Debian it would only load the command line. Second try: Reinstalled but this time with the netinst version. I only got a black screen where I could type but nothing else. Third Try. Tried the netinst again. This time after making the partitions I got a message that said that no EFI partition was found. I ignored the message and this time it wouldn't even load Grub. only a command like interface with grub rescue or something. Not once did I get an error during the installation. What am I doing wrong? I assume the problem is I need to make an EFI partition or something like that. So why is it that during the first installations I didn't ask me for that. And if that is indeed the problem, How can I solve it? Update So the installation failed again... as predicted. Here you can find the Disk Management picture. http://postimg.org/image/433cpfkjz/ Please somebody help me. I keep getting the grub rescue thing. secure boot is disabled and legacy support is set first.

    Read the article

  • How to create multiboot flash drive

    - by Nrew
    I've found a guide here: http://www.pendrivelinux.com/boot-multiple-iso-from-usb-multiboot-usb/ And found this menu.lst in my flash drive, which seems to be the one that I'm seeing when I boot using my flash drive: # This Menu Created by Lance http://www.pendrivelinux.com # Ongoing Suggested Menu Entries and the Suggestor are noted! default 0 timeout 30 color NORMAL HIGHLIGHT HELPTEXT HEADING splashimage=(hd0,0)/splash.xpm.gz foreground=FFFFFF background=0066FF title Memtest86+ find --set-root /memtest86+-4.00.iso map --mem /memtest86+-4.00.iso (hd32) map --hook root (hd32) chainloader (hd32) # Suggested by madprofessor title Boot Clonezilla root (hd0,0) kernel /clonezilla/live/vmlinuz live-media-path=clonezilla/live bootfrom=/dev/sd boot=live union=aufs noprompt ocs_live_run="ocs-live-general" ocs_live_extra_param="" ocs_live_keymap="" ocs_live_batch="no" ocs_lang="" vga=791 ip=frommedia initrd /clonezilla/live/initrd.img title Parted Magic 4.9 (Partition Tools) find --set-root /pmagic-4.9.iso map /pmagic-4.9.iso (hd32) map --hook root (hd32) chainloader (hd32) # Suggested by Deb title Partition Wizard 4.2 (Partition Tools) find --set-root /pwhe42.iso map /pwhe42.iso (hd32) map --hook root (hd32) chainloader (hd32) title Balder DOS image (FreeDOS) map --unsafe-boot /balder10.img (fd0) map --hook chainloader --force (fd0)+1 rootnoverify (fd0) # Suggested by Szymon Silski title Linux Mint 8 find --set-root /LinuxMint-8.iso map /LinuxMint-8.iso (0xff) map --hook root (0xff) kernel /casper/vmlinuz file=/cdrom/preseed/mint.seed boot=casper persistent iso-scan/filename=/LinuxMint-8.iso splash initrd /casper/initrd.lz title Ubuntu 10.04 find --set-root /ubuntu-10.04-desktop-i386.iso map /ubuntu-10.04-desktop-i386.iso (0xff) map --hook root (0xff) kernel /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper persistent iso-scan/filename=/ubuntu-10.04-desktop-i386.iso splash initrd /casper/initrd.lz title Xubuntu 10.04 (XFCE Desktop) find --set-root /xubuntu-10.04-desktop-i386.iso map /xubuntu-10.04-desktop-i386.iso (0xff) map --hook root (0xff) kernel /casper/vmlinuz file=/cdrom/preseed/xubuntu.seed boot=casper persistent iso-scan/filename=/xubuntu-10.04-desktop-i386.iso splash initrd /casper/initrd.lz title Kubuntu 10.04 (KDE Desktop) find --set-root /kubuntu-10.04-desktop-i386.iso map /kubuntu-10.04-desktop-i386.iso (0xff) map --hook root (0xff) kernel /casper/vmlinuz file=/cdrom/preseed/kubuntu.seed boot=casper persistent iso-scan/filename=/kubuntu-10.04-desktop-i386.iso splash initrd /casper/initrd.lz # Suggested by Ambriel title Lubuntu 10.04 (LXDE Lightweight Desktop) find --set-root /lubuntu-10.04.iso map /lubuntu-10.04.iso (0xff) map --hook root (0xff) kernel /casper/vmlinuz file=/cdrom/preseed/lubuntu.seed boot=casper persistent iso-scan/filename=/lubuntu-10.04.iso splash initrd /casper/initrd.lz title Ubuntu 10.04 Netbook Remix (NetBook Distro) find --set-root /ubuntu-10.04-netbook-i386.iso map /ubuntu-10.04-netbook-i386.iso (0xff) map --hook root (0xff) kernel /casper/vmlinuz file=/cdrom/preseed/netbook-remix.seed boot=casper persistent iso-scan/filename=/ubuntu-10.04-netbook-i386.iso splash initrd /casper/initrd.lz title Ubuntu 10.04 Server Edition Installer (32 bit Installer Only) find --set-root /ubuntu-10.04-server-i386.iso map /ubuntu-10.04-server-i386.iso (0xff) map --hook root (0xff) kernel /install/vmlinuz file=/cdrom/preseed/ubuntu-server.seed boot=install iso-scan/filename=/ubuntu-10.04-server-i386.iso splash initrd /install/initrd.gz title Ubuntu 9.10 find --set-root /ubuntu-9.10-desktop-i386.iso map /ubuntu-9.10-desktop-i386.iso (0xff) map --hook root (0xff) kernel /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper persistent iso-scan/filename=/ubuntu-9.10-desktop-i386.iso splash initrd /casper/initrd.lz title Xubuntu 9.10 find --set-root /xubuntu-9.10-desktop-i386.iso map /xubuntu-9.10-desktop-i386.iso (0xff) map --hook root (0xff) kernel /casper/vmlinuz file=/cdrom/preseed/xubuntu.seed boot=casper persistent iso-scan/filename=/xubuntu-9.10-desktop-i386.iso splash initrd /casper/initrd.lz title Kubuntu 9.10 find --set-root /kubuntu-9.10-desktop-i386.iso map /kubuntu-9.10-desktop-i386.iso (0xff) map --hook root (0xff) kernel /casper/vmlinuz file=/cdrom/preseed/kubuntu.seed boot=casper persistent iso-scan/filename=/kubuntu-9.10-desktop-i386.iso splash initrd /casper/initrd.lz # Ubuntu Server and Netbook Remix suggested by Wojciech Holek title Ubuntu 9.10 Server Edition Installer (Installer Only) find --set-root /ubuntu-9.10-server-i386.iso map /ubuntu-9.10-server-i386.iso (0xff) map --hook root (0xff) kernel /install/vmlinuz file=/cdrom/preseed/ubuntu-server.seed boot=install iso-scan/filename=/ubuntu-9.10-server-i386.iso splash initrd /install/initrd.gz title Ubuntu 9.10 Netbook Remix (NetBook Distro) find --set-root /ubuntu-9.10-netbook-remix-i386.iso map /ubuntu-9.10-netbook-remix-i386.iso (0xff) map --hook root (0xff) kernel /casper/vmlinuz file=/cdrom/preseed/netbook-remix.seed boot=casper persistent iso-scan/filename=/ubuntu-9.10-netbook-remix-i386.iso splash initrd /casper/initrd.lz title Ubuntu 9.10 Rescue Remix (Recovery Tools) find --set-root /ubuntu-rescue-remix-9-10-revision1.iso map /ubuntu-rescue-remix-9-10-revision1.iso (0xff) map --hook root (0xff) kernel /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper iso-scan/filename=/ubuntu-rescue-remix-9-10-revision1.iso splash initrd /casper/initrd.lz title DSL 4.4.10 find --set-root /dsl-4.4.10-initrd.iso map --mem /dsl-4.4.10-initrd.iso (hd32) map --hook root (hd32) chainloader (hd32) title AVG Rescue CD (Anti-Virus + Anti-Spyware) find --set-root /avg_arl_en_90_100114.iso map /avg_arl_en_90_100114.iso (hd32) map --hook chainloader (hd32) title Ultimate Boot CD 4.11 find --set-root /ubcd411.iso map /ubcd411.iso (hd32) map --hook chainloader (hd32) title OphCrack XP 2.3.1 (XP Password Cracker) find --set-root /ophcrack-xp-livecd-2.3.1.iso map /ophcrack-xp-livecd-2.3.1.iso (0xff) map --hook root (0xff) kernel /boot/bzImage rw root=/dev/null vga=normal lang=C kmap=us screen=1024x768x16 autologin initrd /boot/rootfs.gz title OphCrack Vista 2.3.1 (Vista Password Cracker) find --set-root /ophcrack-vista-livecd-2.3.1.iso map /ophcrack-vista-livecd-2.3.1.iso (0xff) map --hook root (0xff) kernel /boot/bzImage rw root=/dev/null vga=normal lang=C kmap=us screen=1024x768x16 autologin initrd /boot/rootfs.gz # Suggested by Greg Steer title Offline NT Password & Registy Editor find --set-root /cd080802.iso map /cd080802.iso (hd32) map --hook chainloader (hd32) title SliTaz 2.0 find --set-root /slitaz-2.0.iso map --mem /slitaz-2.0.iso (hd32) map --hook chainloader (hd32) title Riplinux 9.3 find --set-root /RIPLinuX-9.3.iso map --heads=0 --sectors-per-track=0 /RIPLinuX-9.3.iso (0xff) || map --heads=0 --sectors-per-track=0 --mem /RIPLinuX-9.3.iso (0xff) map --hook chainloader (0xff) # Suggested by Sunny title YlmF (Windows Like OS) find --set-root /YlmF_OS_EN_v1.0.iso map /YlmF_OS_EN_v1.0.iso (0xff) map --hook root (0xff) kernel /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper persistent iso-scan/filename=/YlmF_OS_EN_v1.0.iso splash initrd /casper/initrd.lz # Suggested by Martin Andersson title DBAN 1.0.7 (Drive Nuker) find --set-root /dban-1.0.7_i386.iso map --mem /dban-1.0.7_i386.iso (hd32) map --hook root (hd32) chainloader (hd32) # Suggested by Robin McGough title xPUD 0.9.2 (NetBook Distro) find --set-root --ignore-floppies --ignore-cd /xpud-0.9.2.iso map --heads=0 --sectors-per-track=0 /xpud-0.9.2.iso (hd32) map --hook chainloader (hd32) title Puppy 4.3.1 find --set-root /puppy/pup-431.sfs kernel /puppy/vmlinuz initrd /puppy/initrd.gz # Suggested by Relst title Run a Linux OS from the Internet kernel /gpxe.lkrn I also put some .iso files for os installers (Windows xp sp2 and Ubuntu 10.04) But they didn't show up in the list when I booted Do I need to: extract the .iso files and put in in their respective folders? Add the os that I added on the menu.lst? How do I add the iso image(os) in the menu.lst? Before adding the .iso files I first made a folder named Windows xp sp2 then placed the .iso files in there. Please help, I think I need to add the folder name or the file name on the menu.lst but I don't know how

    Read the article

  • Problem installing Ubuntu 10.04 64 bit side by side with Vista by using a bootable USB drive. What n

    - by Adam Siddhi
    What happened I decided to install Ubuntu 10.04 64 bit side by side with Vista Home Premium (I guess on another partition) with a USB stick. I found instructions on how to do this here: https://help.ubuntu.com/community/Installation/FromUSBStick To create the bootable USB drive I had to download a program called Unetbootin. That process was simple enough. All I had to do was just choose the disk image option, select the ubuntu-10.04-desktop-amd64.iso image, make sure it recognizes my USB drive and then press OK. It takes only like a few minutes to create a working bootable USB drive. Then I have to restart my computer, enter the BIOS, select my USB drive as the first boot drive, save options and continue with booting up. After this Ubuntu actually loads up. I think this is known as the Live version of Ubuntu so you can try it out before fully installing it. Any ways, on the Ubuntu 10.04 desktop I saw an installer. I click it and begin the installation process. Just so you know, I tried installing it 2 times. I will explain what happened each time: The first time I tried installing Ubuntu 10.04 I got stuck at step 4 of 7. I remember selecting the last option in the window which was Specify Partitions Manually (Advanced) I made my partition for Ubuntu like 52 gigs. I clicked forward and a little pop up window appeared saying Please Wait. So the installation process stalled on this window so I closed out of it and quit the installation process. So at this point I was worried because I had already selected the partition size and assumed it started making it. Since it stalled I had to quit out though. Anyways, once again I reached step 4 of 7 a decided to select the first option which is Install them side by side choosing between them each startup. I figured this was the safe way to go. I did that and the pop up window saying Please Wait popped up again but lasted only like 10 seconds. Then I got to I guess step 6 where it asks you to enter your desired name and password. Did that and clicked forward. The Ubuntu 10.04 installation load screen appeared and the loading bar at the bottom started filling up. So I got to 83% and stalled during the Importing other profile information (I think it was called this. I had the option to do this during I think step 6) process. So at this point I decided to get stop the installation process. I was getting very nervous. I tried to restart the computer but all that happened was that Ubuntu restarted. I finally got the computer to restart. I was pretty sure I had screwed something up big time by this point. As my computer was restarting I entered BIOS again and switched back to it booting from my main hard drive containing Vista. Saved it and continued the boot process. My worst fears were confirmed as Vista would not boot up. I mean I saw the little Microsoft Windows choppy animated green loading bar at the bottom of the screen and then boom! It decided to restart. When it restarted I had the option to run a memory test check to see if there was anything that needed to be repaired. That took like 20 minutes and at the end I saw that I did indeed have to repair something. I had to go through 2 repair processes. After each I had to restart the computer. The 2nd time it went through the repair process it said that it could not fully repair the damage. I was scared and restarted but Vista did load up. I got to my desktop and saw a message saying something like Repairs have been made, Please restart for changes to take effect I noticed that some Notification icons were missing and I could not hear volume in a video. Things were a bit funky. So I did restart and here I am. Now what?! So since I got back into Vista and thankfully have a working Internet connection I am trying to find answers to my problem (that is why I am writing this post). I am scared that I have partioned my hard drive 2 times after researching Installing Ubuntu 10.04 and seeing this post http://techie-buzz.com/foss/ubuntu-10-04-lts-installation-guide.html The author shows screen shots of installing Ubuntu 10.04. He shows the image of step 4 of 7 with a caption at the bottom. I will recreate it below: Select a partitioning option. Unless you want to format all the hard drive and install Ubuntu afresh, select the last option and proceed. Questions If I have indeed partitioned my HD 2 times (which I am sure it is), how do I get to a point where I can see all my bad, unfinished Ubuntu partitions and get rid of them? How do I clean this big mess up? & How can I ensure that this mess will not happen next time I try installing Ubuntu 10.04? Thank you Adam

    Read the article

< Previous Page | 97 98 99 100 101 102 103 104 105 106 107 108  | Next Page >