Search Results

Search found 4783 results on 192 pages for 'tests'.

Page 101/192 | < Previous Page | 97 98 99 100 101 102 103 104 105 106 107 108  | Next Page >

  • How to achieve reliable Gigabit Ethernet Link with my Acer Aspire Revo R3610?

    - by The Operator
    I want to stream HD movies over my wired Gigabit LAN from my PC to my Acer Aspire Revo R3610. It's connected with a 3ft Cat5e patch cable to my Netgear GS605v2 Switch. The PC acting as File Server is connected at 1Gbps to the Switch. Network driver options are set to defaults, including automatic speed/duplex negotiation on both machines. The Revo will not connect to my Network Switch at 1Gbps - the OS reports that it reverts to 100Mbps either shortly after connection or immediately upon connection. Through a process of elimination (trying different drivers, patch cables, ports on the switch, and other 1Gbps-capable devices connected to the Network switch which successfully achieve 1Gbps links and performance) I have drawn the conclusion there is either a Hardware or Software (Driver) issue with the Revo itself. I have performed tests using Windows 7 and Ubuntu 9.10. Can anyone offer insight on Gigabit Ethernet with the Revo?

    Read the article

  • How to troubleshoot intermittent and irregular connection errors on home network (preferrably Mac client)

    - by Martin
    Hi, I'm experiencing intermittent connection errors in our home network from two different computers, normally "Connection Reset" when browsing, but also other issues such as very slow throughput. I have approximately a network setup as below: ISP-Cable Modem-Dlink DIR 655 Router-(Ethernet)-Fon Router-Mac/Windows laptop Basically, is there a simple way to monitor the network and detect where issues are coming from? Right now we don't know if it is the Fon router, the Dlink router, the modem or the ISP. As the issue is intermittent, is there a software that regularly traceroutes a set of destinations and tests e.g. throughput, something that can help us figure out where in the chain the errors are introduced? The more automatic network monitor, the better.

    Read the article

  • Laptop monitor goes black under intense graphics

    - by drahcir
    I have a dell inspiron 1520 with a nvidia GeForce 8600M GT video card. I have Windows 7 professional as an operating system. Yesterday when I was using it the screen started to somewhat flicker then go completely black. I restarted it and in the boot screen everything seems fine, when I entered the login screen it became flickery again, and when I logged in, when a couple of windows popped up it went black again. I hooked it up to a tft monitor and the monitor works fine, and did some more tests that confirmed that under higher graphics causes the laptop monitor to go black. Is there a reason why this is happening?

    Read the article

  • PSKill does not run from VbScript

    - by David
    We have a site on our local IIS6 Windows 2003 server that occasionally locks up, and we would like a VbScript to kill the process. It is located in the system32 folder. I'm running these tests on the local machine. For simplicity, my VbScript file simply has lines such as these: WScript.Echo "PSKill.exe " & W3WP.ProcessId WshShell.Run "PSKill.exe " & W3WP.ProcessId WScript.Echo "Killed Process" Obtained earlier in the script, W3WP.ProcessId contains the correct process ID. The script outputs to the screen: PSKill.exe 6884 But the line that is supposed to execute the command does nothing. If I type the command in, it works fine. Why does PsKill work fine when I type it, but not from VbScript?

    Read the article

  • How reliable is HDD SMART data?

    - by andahlst
    Based on SMART data, you can judge the health of a disk, at least that is the idea. If I, for instance, run sudo smartctl -H /dev/sda on my ArchLinux laptop, it says that the hard drive passed the self tests and that it should be "healthy" based on this. My question is how reliable this information is, or more specifically: If according to the SMART data this disk is healthy, what are the odds of the disk suddenly failing despite this? This assumes the failure is not due to some catastrophic event that impossibly could have been predicted, such as the laptop falling down on the floor causing the drive heads to hit the disk. If the SMART data does not say the disk is in good shape, what are the odds of the disk failing within some amount of time? Is it possible that there will be false positives and how common are these? Of course, I keep backups no matter what. I am mostly curious.

    Read the article

  • What can I do to improve a project if there is a no-listening situation. Developers vs Management

    - by NazGul
    Hi all, I hope that I'm not the only one and I can get a answer from someone with more experience than me, so I can think cleaner and I don't get depressed with this developer's life. I'm working as developer for a small company three years now. In that three years I'm working in the same project and sincerely, I think this project could be used as a CASE STUDY because it has all the situations that cannot happen in a project and that makes a project fails. To begin with, and I believe you've already noticed, the project has 3 years already (develoment only) and is still unfinished, because in every meeting there is a "new priority" ,or a "new problem" to be solve or a "new feature" to be add. So, first problem is no target set. How can you know when something is finished if you don't know what you want? I understand Management, because they see an oportunity and try to get that, but I don't understand how can they not see (or hear us) that they'll lose all they already have and what they'll eventually get. Second, there is no team group. My team consists of three people, a Senior Developer, a DBA and, finally, I for all the work (support, testing, new features, bug fixing, meeting, projet management of clients, etc) aka Junior Developer. The first (senior developer), does not perform any tests on his changes, so, most of the time, his changes give us problems (us = me, since I'm the one who will fix it). The second (DBA) is an uncompromising person and you can not talk to him, believe me, I tried! In his view, everything he does is fantastic... even if it is the most complicated to make it... And he does everything he wants, even if we need that only for 5 months later and would help some extra-hand to do the things we have to do for now. As you can see, there is very hard to work with no help... Third, there is no testings. Every... I repeat, Every release of the project, the customers wants to kill us, because there is a lot of bugs. Management? They say that they want tests before the release. Us? We say the same. Time? No time. Management? There is always some time to open the application and click in some buttons. Us? Try to explain that it is not so simple. Management doesn't care... end of story. Actually, must of the bugs could be avoid with a rigorous work... Some people just want to do the show to the Management. "Did you ask for this? Cool, it's done. Bugs? The Do-all-the-work guy will solve." Unfortunally for me, sometimes the Do-all-the-work also has to finish it. And to makes this all better, I'm the person who will listen the complaints from the customers. Cool, huh? I know, everyone makes mistakes. But there is mistakes and mistakes... To complete, in the Management view, "the problem is the lack of an individual project management", because we cannot do all the stuff they ask, even if there is no PM for the project itself. And ask us to work overtime without any reward... I do say all this stuff to the management and others members, but by telling this, the I'm the bad guy, the guy who is complain when everything is going well... but we need to work overtime... sigh What can I do to make it works? Anyone has a situation like this, what did you do? I hope you could understand my problem, my English is a little rusty. Thanks.

    Read the article

  • how to find the clientname of an remote desktop session?

    - by Hemal Pandya
    We have servers on which we run tests and all users connect using the same credentials. The server allows 2 connections. What happens often is that one user is already active and the other two users keep hijacking the remaining session. Using query session, I can find out what are the active connections. But it does not list the client machine from where the session originates, which taskmanager displays. How do I get this information from a remote machine? I prefer a command line solution. Thanks in advance.

    Read the article

  • Trigger ZFS dedup one-off scan/rededup

    - by Jake Wharton
    I have a ZFS filesystems which has been running for some time and I recently had the opportunity to upgrade it (finally!) to the latest ZSF version. Our data doesn't scream dedup but I firmly believe based on small tests that we could gain anywhere from 5-10% of our space back for free by utilizing it. I have enabled dedup on the filesystem and new files are slowly being dedupified but the majority (95%+) of our data already exists on the filesystem. Short of moving the data off-pool and then recopying it back, is there any way to trigger a dedup scan of existing data? It doesn't have to be asynchronous or live. (And FYI there isn't enough room on the pool to copy the entire filesystem to another and then just switch the mounts.)

    Read the article

  • My D-Link's Ethernet bridge downlink just got 10-30x slower?

    - by Jay Levitt
    TL;DR: I unplugged my network to move my desk, and now downloading via my DIR-655's Ethernet LAN bridge is 10-30x slower than the Ethernet switch it's plugged into. Background My network is SMC cable modem <-> Cisco firewall <-> Netgear switch <-> D-Link WiFi† | | | | SMC8014 ASA-5505 GS608v2 gigE DIR-655 rev A3 gigE †The DIR-655 is used as an access point, not a router (although what D-Link calls an access point, I'd call a bridge). The "WAN" port is unused; the Netgear connects to the built-in 4-port Ethernet LAN switch, inside the built- in router/firewall. Endpoints: MacBook Pro 17" mid-2010 iPhone 4S Fedora 12 Linux server running reasonably fast dual-Athlon X2, VelociRaptors, etc. All cables are <10 feet, mostly CAT-5e, some CAT-6, all premade. All WiFi endpoints are within three feet of the D-Link. Yesterday I unplugged and rearranged stuff, and now connecting via the D-Link - even through the wired switch, right next to the incoming network cable - is 30x slower than connecting directly to the Netgear switch, on both my MacBook and iPhone. How I'm measuring "slower" I'm mostly using http://speedtest.net, which of course only really measures broadband speeds. I've also installed http://www.speedtest.net/mini.php on my local server, but can't test the iPhone with that. Results Speedtest.net, closest server over Comcast business-class: CONFIG | PING (ms) | DOWN (Mbps) | UP (Mbps) Mac <-> Ethernet <-> Netgear | 9 | 31.6 | 6.8 Mac <-> Ethernet <-> D-Link | 8 | 4.1 | 6.0 Mac <-> WiFi <-> D-Link | 9 | 1.4 | 2.9 iPhone <-> WiFi <-> D-Link | 67 | 0.4 | 1.6 Speedtest Mini on Linux PC: CONFIG | DOWN (Mbps) | UP (Mbps) Mac <-> Ethernet <-> NetGear | 97.2 | 76.9 Mac <-> Ethernet <-> D-Link | 8.2 | 24.2 Mac <-> WiFi <-> D-Link | 1.0 | 8.6 Slow typing in SSH: Mac <-> Ethernet <-> Netgear <-> Linux PC: smooth Mac <-> Ethernet <-> D-Link <-> Linux PC: choppy Note that D-Link upload speeds are normal on broadband, slower locally (but I'd believe that's a D-Link limitation), and always faster than the downloads! Since ssh is choppy just with slow typing, I don't believe it's a throttling-type problem either; that's not a lot of bandwidth. What I've tried Swapping all "good" and "bad" cables Re-plugging "bad" cable from D-Link to Netgear and watching it be the "good" cable pulling cables away from power lines Verify that the Mac auto-detects the D-Link as gigE Try to verify the link speed of the D-Link <- Netgear connection, but the firmware doesn't report that Verify that the D-Link sees no TX/RX errors or collisions Use different Ethernet ports on both Netgear and D-Link Reset the D-Link to factory settings Upgrade the D-Link firmware from 1.21 to 1.35NA, 2010/11/12, the latest Reboot everything at least once On the Mac, disable Wi-Fi during the Ethernet tests, and unplug Ethernet during the Wi-Fi tests Using iStumbler, verify that the D-Link isn't picking overloaded Wi-Fi channels (usually just 1-5 neighbors on my and adjacent channels, average for my apt building) Verify that the only client connected to the Wi-Fi was the iPhone Verify that nothing was being chatty on my network according to the WISH log Enable and disable all sorts of D-Link settings, including forcing WAN auto-detect to gigE So. I don't mind buying a new access point—I wouldn't mind having a dual-link network—but as a guy who's been networking since gated v4 was a drastic rewrite, and who often used physical sniffers in the days before Wireshark, I'm baffled. I hate being baffled. What could I possibly have changed that would result in this? How can I measure it? All I can think of is a static zap—thick carpet, socks, HVAC—but I didn't feel one, and does that really happen anymore? Can I test if it's Ethernet vs. TCP layer slowness? I'm not familiar with modern network utilities; it's hard to Google without hitting "Q: Why is my network slow? A: Is your microwave on?" If I don't get an answer here, will someone big and powerful help me migrate it to serverfault without getting screamed back here? In the words of Inigo Montoya, "I must know." Don't get all Dread Pirate Roberts on me.

    Read the article

  • Fluxbox startup file not working

    - by Jack
    I am placing apps into my fluxbox startup file as per the instructions, however nothing starts up except fluxbox. It doesn't matter what app I try, so it isn't an app problem. here is my startup file: #!/bin/sh # # fluxbox startup-script: # # Lines starting with a '#' are ignored. # Change your keymap: xmodmap "/home/josh/.Xmodmap" # Applications you want to run with fluxbox. # MAKE SURE THAT APPS THAT KEEP RUNNING HAVE AN ''&'' AT THE END. tint2 & tilda & # And last but not least we start fluxbox. # Because it is the last app you have to run it with ''exec'' before it. exec fluxbox # or if you want to keep a log: # exec fluxbox -log "/home/josh/.fluxbox/log" I have also tried tests such as "touch ~/testwoked" and such, nothing works. It makes no difference if the file is executable or not.

    Read the article

  • Process of carrying out a BER Test

    - by data
    I am subscribed to an ISP supplying a 3meg ADSL line. Lately (for the last 4 weeks) speeds have dropped from the usual average downstream speed of ~250kbps to just 0.14Mbps (according to speedtest.net) and employees are complaining about lack of access to the server. I have been calling customer support and logging calls for the last 3 weeks, but they have been unable to determine the source of the problem other than carrying out a few bitstream tests and checking the DHCP renewal times. I am going to call back and suggest carrying out a BER test. What type of equipment is needed to carry out this test? I have access to a wide range of Cisco networking equipment. Other: We don't need a leased line as there are less than ten employees.

    Read the article

  • wpftoolkit DataGridTemplateColumn Template binding

    - by Guillaume
    I want my datagrid columns to share a cell/celledit template. I have the solution do that (thanks to WPF DataGridTemplateColumn shared template?). Now what I would love to is improving the readability by avoiding all the node nesting. My current view looks like that: <wpftk:DataGrid ItemsSource="{Binding Tests}" AutoGenerateColumns="False"> <wpftk:DataGrid.Resources> <DataTemplate x:Key="CustomCellTemplate"> <TextBlock Text="{TemplateBinding Content}"/> </DataTemplate> <DataTemplate x:Key="CustomCellEditingTemplate"> <TextBox Text="{TemplateBinding Content}"></TextBox> </DataTemplate> </wpftk:DataGrid.Resources> <wpftk:DataGrid.Columns> <wpftk:DataGridTemplateColumn Header="Start Date"> <wpftk:DataGridTemplateColumn.CellTemplate> <DataTemplate> <ContentPresenter ContentTemplate="{StaticResource CustomCellTemplate}" Content="{Binding StartDate}"/> </DataTemplate> </wpftk:DataGridTemplateColumn.CellTemplate> <wpftk:DataGridTemplateColumn.CellEditingTemplate> <DataTemplate> <ContentPresenter ContentTemplate="{StaticResource CustomCellEditingTemplate}" Content="{Binding StartDate}"/> </DataTemplate> </wpftk:DataGridTemplateColumn.CellEditingTemplate> </wpftk:DataGridTemplateColumn> <!--and again the whole block above for each columns...--> </wpftk:DataGrid.Columns> </wpftk:DataGrid> What I would like to achieve is to bind the value at the DataGridTemplateColumn level and propagate it to the template level. Anyone know how to do that? What I tried to do is something like that: <wpftk:DataGrid ItemsSource="{Binding Tests}" AutoGenerateColumns="False"> <wpftk:DataGrid.Resources> <DataTemplate x:Key="CustomCellTemplate"> <TextBlock Text="{Binding}"/> </DataTemplate> <DataTemplate x:Key="CustomCellEditingTemplate"> <TextBox Text="{Binding}"></TextBox> </DataTemplate> </wpftk:DataGrid.Resources> <wpftk:DataGrid.Columns> <wpftk:DataGridTemplateColumn Header="Start Date" Binding="{Binding StartDate}" CellTemplate="{StaticResource CustomCellTemplate}" CellEditingTemplate="{StaticResource CustomCellEditingTemplate}"/> <wpftk:DataGridTemplateColumn Header="End Date" Binding="{Binding EndDate}" CellTemplate="{StaticResource CustomCellTemplate}" CellEditingTemplate="{StaticResource CustomCellEditingTemplate}"/> </wpftk:DataGrid.Columns> </wpftk:DataGrid> Obviously the binding porperty is not a valid property of the DataGridTemplateColumn but maybe by playing with the datacontext and some relative source could do the trick but frankly I can't find a way to implement that. Not sure if what I want is possible and i'm willing to accept a "no way you can do that" as an answer NOTE: The TextBlock/TextBox in the template is just for test (the real template is much more complex) DataGridTextColumn will not do the trick Thanks in advance

    Read the article

  • PC will be turned off in safe mode

    - by abbasi
    I wanted to scan a Dell inspiron N5010 laptop in safe mode. When I took it to the safe mode environment and ran the AV to scan, after some while the PC went out! The power options menu options (when plug is in) are as follows: Screensaver after 4 mins. Dim to display after 10 mins. Turn off display after 15 mins. Hard disk, sleep and hibernate are all off (set to never). I tested the machine without scanning it, i.e, went to the safe mode and waited to see what occurs after time elapsing. By observations so far (because I can apply more tests to determine that where the problem exactly is), the problem is when the machine is in safe mode and is doing something (in current case, scanning). What do you think? Why it goes out in this situation please? Thanks in advance.

    Read the article

  • Is there a program that compares image files and reports if they are exactly the same pixel-wise?

    - by Nathaniel Drake
    I'm making a regression testing suite for some rendering software. I need to be able to load an image file (PNG or TGA, ideally) and compare the pixel values to a standard approved image. I'd like it to be command line driven too, so I can make a batch file to run all the tests. All the compare utilities I have found so far either show differences (I just need it to fail if they are different) or compare all the bytes, meaning that meta-data will trigger a fail. Anyone got any suggestions? I am not a coder, and can only barely cobble a batch script together. Thanks for any suggestions.

    Read the article

  • Run python script on server over ssh session in the background persistantly

    - by Stefan R. Falk
    I got an account from my professor for our universities CUDA server for running some tests. I am connecting via ssh over terminal. The thing is, as I close the terminal the server also seems to kill the running script. As I reconnect it has stopped. No it is not possible that the script already terminated since those test runs should take a few hours even on those machine.. Can anybody help me here? OS: Linux cuda01 3.13-1-amd64 #1 SMP Debian 3.13.7-1 (2014-03-25) x86_64 GNU/Linux

    Read the article

  • Methodologies for performance-testing a WAN link

    - by Chopper3
    We have a pair of new diversely-routed 1Gbps Ethernet links between locations about 200 miles apart. The 'client' is a new reasonably-powerful machine (HP DL380 G6, dual E56xx Xeons, 48GB DDR3, R1 pair of 300GB 10krpm SAS disks, W2K8R2-x64) and the 'server' is a decent enough machine too (HP BL460c G6, dual E55xx Xeons, 72GB, R1 pair of 146GB 10krpm SAS disks, dual-port Emulex 4Gbps FC HBA linked to dual Cisco MDS9509s then onto dedicated HP EVA 8400 with 128 x 450GB 15krpm FC disks, RHEL 5.3-x64). Using SFTP from the client we're only seeing about 40Kbps of throughput using large (2GB) files. We've performed server to 'other local server' tests and see around 500Mbps through the local switches (Cat 6509s), we're going to do the same on the client side but that's a day or so away. What other testing methods would you use to prove to the link providers that the problem is theirs?

    Read the article

  • Test site speed

    - by Elad Lachmi
    I am test driving an Akmai CDN architecture and before committing to buy, I would like to gauge the real performance gain from the acceleration feature. What would be the best MO for doing speed tests from different locations around the world? I would like to test the page load speed and not just the server response time. I would like to test speed from as many edge locations as possible. I do not mind a paid service as well, if it is optimal. Thank you!

    Read the article

  • Configure spamassassin to mark very similar messages as spam

    - by Caleb Gray
    Users on my server have been receiving spam, consistently, for some time now. I have most of spamassassin's plugins enabled, and I have made sure to enable verbose logging, where I can see that all of the plugins are working. Why is it, then, that my users are able to receive the same exact junk mail several times in a day without the message being flagged in some way? Here are the relevant headers of an email that I personally have received several copies of: X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on sub.domain.tld X-Spam-Level: *** X-Spam-Status: No, score=3.0 required=4.0 tests=BAYES_50,FSL_HELO_NON_FQDN_1, HELO_NO_DOMAIN,HTML_MESSAGE,RCVD_IN_BRBL_LASTEXT,RDNS_NONE autolearn=no version=3.3.1 Have I accidentally missed the plugin that can see that I, and others, have received the same message multiple times in a short period of time?

    Read the article

  • Configuring BitLocker on existing Windows Server 2008

    - by neildeadman
    On our file server, we want to enable BitLocker so that we can encrypt a single drive and I know that we have to also encrypt the drive the system is installed on. In my tests with VMs, I have to create a partition on the same disk as Windows is installed either before I install Windows or after (I can use the BitLocker Drive Preparation Tool). This tool shrinks the C: drive to make way for a 1.5GB partition. I'm a little concerned about doing this with a live system so wanted to see if it was possible to get BitLocker to use a partition on another drive?

    Read the article

  • how can i use apache log files to recreate usage scenario

    - by daigorocub
    Recently i installed a website that had too many requests and it was too slow. Many improvements have been made to the web site code and we've also bought a new server. I want to test the new server with exactly the same requests that made the old server slow. After that, i will double the requests, make new tests and so on. These requests are logged in the apache log files. So, I can parse those files and make some kind of script to make the same requests. Of course, in this case, the requests will be made only by my computer against the server, but hey, better than nothing. Questions: - is there some app that does this already? - would you use wget? ab? python script? Thanks!

    Read the article

  • maven test cannot load cross-module resources/properties ?

    - by smallufo
    I have a maven mantained project with some modules . One module contains one XML file and one parsing class. Second module depends on the first module. There is a class that calls the parsing class in the first module , but maven seems cannot test the class in the second module. Maven test reports : java.lang.NullPointerException at java.util.Properties.loadFromXML(Properties.java:851) at foo.firstModule.Parser.<init>(Parser.java:92) at foo.secondModule.Program.<init>(Program.java:84) In "Parser.java" (in the first module) , it uses Properties and InputStream to read/parse an XML file : InputStream xmlStream = getClass().getResourceAsStream("Data.xml"); Properties properties = new Properties(); properties.loadFromXML(xmlStream); The "data.xml" is located in first module's resources/foo/firstModule directory , and it tests OK in the first module. It seems when testing the second module , maven cannot correctly load the Data.xml in the first module . I thought I can solve the problem by using maven-dependency-plugin:unpack to solve it . In the second module's POM file , I add these snippets : <plugin> <groupId>org.apache.maven.plugins</groupId> <artifactId>maven-dependency-plugin</artifactId> <version>2.1</version> <executions> <execution> <id>data-copying</id> <phase>test-compile</phase> <goals> <goal>unpack</goal> </goals> <configuration> <artifactItems> <artifactItem> <groupId>foo</groupId> <artifactId>firstModule</artifactId> <type>jar</type> <includes>foo/firstModule/Data.xml</includes> <outputDirectory>${project.build.directory}/classes</outputDirectory> </artifactItem> </artifactItems> </configuration> </execution> </executions> </plugin> In this POM file , I try to unpack the first module , and copy the Data.xml to classes/foo/firstModule/ directory , and then run tests. And indeed , it is copied to the right directory , I can find the "Data.xml" file in "target/classes/foo/firstModule" directory. But maven test still complains it cannot read the File (Properties.loadFromXML() throws NPE). I don't know how to solve this problem. I tried other output directory , such as ${project.build.directory}/resources , and ${project.build.directory}/test-classes , but all in vain... Any advices now ? Thanks in advanced. Environments : Maven 2.2.1 , eclipse , m2eclipse

    Read the article

  • Ping from windows 7 get no reply but sets errorlevel to 0

    - by Doron
    From a Windows 7 machine, I ping an IP address of a turned-off machine. C:\>ping 192.168.1.222 Pinging 192.168.1.222 with 32 bytes of data: Reply from 192.168.1.222: Destination host unreachable. Reply from 192.168.1.222: Destination host unreachable. Reply from 192.168.1.222: Destination host unreachable. Ping statistics for 192.168.1.222: Packets: Sent = 3, Received = 3, Lost = 0 (0% loss) Even though there is no reply, the errorlevel is set to 0. What I am trying to do, is figure out if a remote machine is replying to ping. One of my tests is to turn off the machine and ping it. For some reason, ping sets errorlevel to 0.

    Read the article

  • Can't serve files without extension because they "appear to be script" on IIS7.5

    - by madd0
    I created a certain number of static JSON files with no extension in a subfolder of my site. I want to use them for tests. The problem is that IIS is refusing to serve them because : HTTP Error 404.17 - Not Found The requested content appears to be script and will not be served by the static file handler. The folder is a subfolder of an ASP.NET application and I can't create an application just for it, neither can I change the parent application's application pool. Actually, I don't have access to the IIS configuration other than through the web.config file in the folder in question. I assume there must be a way to get a web server to serve static files, right?

    Read the article

  • 27 days after domain transfer name servers not propogated

    - by Thom Seddon
    We recently bought the domain: embarrassingnightclubphotos.com 7 days after accepting the transfer the domain finally transferred to our registrar and we immediately changed the name servers from ns*.netregistry.net to amy.ns.cloudflare.com and cody.ns.cloudflare.com 20 days after changing the name servers, the majority of tests show that both old and new nameservers are still being reported: http://intodns.com/embarrassingnightclubphotos.com http://www.whatsmydns.net/#NS/embarrassingnightclubphotos.com We are now ready to launch the new site but this issue is plagueing us as a high proportion of the traffic is still receiving the old nameserves and so hitting the old server. You can tell if you have hit the old or new server as the old server has the value "A" for the meta tag "Location" and the new server has "U". (The old server just has an iframe too!) I have never had this problem before - who is causing this and how should we go about reaching a resolution? Thanks

    Read the article

  • Using Apache Environment Variables to set custom ErrorDocument

    - by Tad
    I've got a set of RewriteCond rules that test for various mobile devices and then set environment variables like "env=device:.iphone" or "env=device:.smartphone" if the useragent matches an iPhone or Android device. I'm trying to now redirect the user to custom-styled 404/500 server error pages for each device, by way of the error pages. Ideally I'd like to be able to test for a variable being there, and then write in a custom ErrorDocument string. But an apache doesn't seem to work in this case. Any ideas how I can construct if/else tests in an apache conf file for environment vars?

    Read the article

< Previous Page | 97 98 99 100 101 102 103 104 105 106 107 108  | Next Page >