Search Results

Search found 5881 results on 236 pages for 'xor power'.

Page 101/236 | < Previous Page | 97 98 99 100 101 102 103 104 105 106 107 108  | Next Page >

  • Xubuntu vs Ubuntu 10.04 Performance

    - by wag2639
    I know it just came out today, but are there any statistics with memory requirements, system resources, power usage, and performance to decide which is better Xubuntu or Ubuntu (XFCE vs Gnome)? My main concern is running it as secondary OS on my Lenovo T400 laptop to just get online quickly and using SSH from a terminal to connect to remote web servers.

    Read the article

  • Asus EEE PC 1005HA battery not being detected

    - by Imran
    My EEE PC's battery is not being detected since this morning. The battery indicator doesn't turn on, Power Options in Windows doesn't detect a battery either. Apart from removing the battery and plugging it back again (which I already did), what can I do??

    Read the article

  • Eject disk on Mac Pro running VMWare ESXi

    - by DougN
    I'm almost embarrassed to ask this, but I'm stuck. I installed VMWare ESXi on a Mac Pro. It's working great! The problem is that you press F12 to eject the disk, and F12 is what you use to shutdown ESX. I can power down, open the case, pull out the CD drive and use a paper clip to force the drawer open, but that's kind of a pain. Any other way to do this?

    Read the article

  • Ubuntu suddenly freezes

    - by tapan
    I've a strange problem with my ubuntu 10.04 installation. Whenever i boot into ubuntu the entire system freezes / hangs soon after (~ 2 mins in). This problem exists on my windows 7 installation too. However if i start World of Warcraft or Warcraft on windows it doesnt hang for the duration i'm playing the game. After i stop playing and exit the game my laptop hangs inside 2 mins. Here is when it gets weirder. If i disconnect the charger, the laptop doesn't hang. However when I start it in ubuntu recovery mode and drop to root shell and use the 'startx' command everything works perfectly. I cannot figure out what the problem is. i have an intel core2duo 2.2ghz processor, intel mobile 965 graphics, 2 GB RAM for more details here is the output of cat /proc/cpuinfo : processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping : 11 cpu MHz : 2201.000 cache size : 4096 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm ida tpr_shadow vnmi flexpriority bogomips : 4389.80 clflush size : 64 power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping : 11 cpu MHz : 2201.000 cache size : 4096 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm ida tpr_shadow vnmi flexpriority bogomips : 4388.96 clflush size : 64 power management: here is the output of cat /proc/meminfo MemTotal: 2052440 kB MemFree: 55924 kB Buffers: 579352 kB Cached: 821752 kB SwapCached: 704 kB Active: 897124 kB Inactive: 1032256 kB Active(anon): 412140 kB Inactive(anon): 264804 kB Active(file): 484984 kB Inactive(file): 767452 kB Unevictable: 0 kB Mlocked: 0 kB HighTotal: 1178440 kB HighFree: 6012 kB LowTotal: 874000 kB LowFree: 49912 kB SwapTotal: 995988 kB SwapFree: 986616 kB Dirty: 8928 kB Writeback: 0 kB AnonPages: 527596 kB Mapped: 76536 kB Slab: 39480 kB SReclaimable: 21100 kB SUnreclaim: 18380 kB PageTables: 5672 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 2022208 kB Committed_AS: 1856400 kB VmallocTotal: 122880 kB VmallocUsed: 11928 kB VmallocChunk: 104644 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 4096 kB DirectMap4k: 16376 kB DirectMap4M: 892928 kB Also the kern.log doesn't show any errors. What I want to know is what might be the problem, how i could test for it and if there are any solutions I could try. Thanks :).

    Read the article

  • Powering-down USB Powered Devices on laptop sleep

    - by Carl
    I recently purchased a Targus Lap Chill Mat, which is a USB powered device, but doesn't have any interface/storage/etc function. I'd like it to power-down when my (macbook) laptop sleeps (since the fan obviously doesn't need to be running when the laptop is idle) without having to unplug it. Any suggestions?

    Read the article

  • Illustrator CS4 Gradient Following a Path

    - by James B
    I'm trying to draw a power cable in illustrator, I want the cable to have one side dark and the other light with a gradient in the middle, because the cable has curved corners it won't work the usual way. I have tried making an art brush with a gradient in it which definitely didn't give me the effect I was looking for. Do you know anyway I can solve this problem?

    Read the article

  • How repair/uninstall Visual Web Developer 2010 Beta 2?

    - by Sprinter
    I cannot uninstall Visual Web Developer 2010 Beta 2. When I was trying to uninstall the first time, the power went off to my machine and screwed up the Beta 2 installation. I cannot find a Visual Web Developer 2010 Beta 2 download on the Microsoft website any longer to repair the Beta 2 installation. How can I get VWD 2010 Beta 2 off of my system so I can install the new release?

    Read the article

  • Acer Aspire One AOA 150 netbook health monitoring software

    - by iceman
    I have a Acer Aspire One AOA 150 with Windows Xp Home. I want to monitor the voltages from the power supply, the temperature of the system, the CPU and fan speeds. Much like the functionality of GKrellM(though I haven't used this on the netbook yet) , a GTK applet designed to make an impressive panel of monitors or xsensors in Linux. Is this possible with the netbook? I want a software for Windows 7 and Windows Xp.

    Read the article

  • Ubuntu/Windows suddenly freezes

    - by tapan
    I've a strange problem with my ubuntu 10.04 installation. Whenever i boot into ubuntu the entire system freezes / hangs soon after (~ 2 mins in). This problem exists on my windows 7 installation too. However if i start World of Warcraft or Warcraft on windows it doesnt hang for the duration i'm playing the game. After i stop playing and exit the game my laptop hangs inside 2 mins. Here is when it gets weirder. If i disconnect the charger, the laptop doesn't hang. However when I start it in ubuntu recovery mode and drop to root shell and use the 'startx' command everything works perfectly. I cannot figure out what the problem is. i have an intel core2duo 2.2ghz processor, intel mobile 965 graphics, 2 GB RAM for more details here is the output of cat /proc/cpuinfo : processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping : 11 cpu MHz : 2201.000 cache size : 4096 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm ida tpr_shadow vnmi flexpriority bogomips : 4389.80 clflush size : 64 power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping : 11 cpu MHz : 2201.000 cache size : 4096 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm ida tpr_shadow vnmi flexpriority bogomips : 4388.96 clflush size : 64 power management: here is the output of cat /proc/meminfo MemTotal: 2052440 kB MemFree: 55924 kB Buffers: 579352 kB Cached: 821752 kB SwapCached: 704 kB Active: 897124 kB Inactive: 1032256 kB Active(anon): 412140 kB Inactive(anon): 264804 kB Active(file): 484984 kB Inactive(file): 767452 kB Unevictable: 0 kB Mlocked: 0 kB HighTotal: 1178440 kB HighFree: 6012 kB LowTotal: 874000 kB LowFree: 49912 kB SwapTotal: 995988 kB SwapFree: 986616 kB Dirty: 8928 kB Writeback: 0 kB AnonPages: 527596 kB Mapped: 76536 kB Slab: 39480 kB SReclaimable: 21100 kB SUnreclaim: 18380 kB PageTables: 5672 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 2022208 kB Committed_AS: 1856400 kB VmallocTotal: 122880 kB VmallocUsed: 11928 kB VmallocChunk: 104644 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 4096 kB DirectMap4k: 16376 kB DirectMap4M: 892928 kB Also the kern.log doesn't show any errors. What I want to know is what might be the problem, how i could test for it and if there are any solutions I could try. Thanks :).

    Read the article

  • Access IIS Admin without local administrator rights

    - by Carl
    We are running Microsoft Server 2003 with IIS. We would like to give our developers access to manage IIS (through IIS Admin) but do not want them to be administrators of the entire machine. Putting them in "Power Users" group does not seem to work. What permissions should we grant to our developers to allow them to manage IIS (e.g. add websites, modify app pools, etc.) without giving them full admin rights to the server?

    Read the article

  • Attach radeon driver to specific PCI devices?

    - by genpfault
    I have two Radeon cards in this machine, a 6570 and a 6950: lspci | grep VGA: 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Turks [Radeon HD 6570] 02:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Cayman PRO [Radeon HD 6950] I'm trying to get VGA passthrough to work with KVM on Debian Wheezy, passing through the 6950 as a secondary video card to a Windows 7 guest. This works fine if I blacklist the radeon kernel module via /etc/modprobe.d/. If I remove the blacklist to run X11 (or even just a KMS console) on the 6570 the radeon module seems to attach to both cards: dmesg | egrep "01:00.0|02:00.0|radeon": pci 0000:01:00.0: [1002:6759] type 0 class 0x000300 pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref] pci 0000:01:00.0: reg 18: [mem 0xf7e20000-0xf7e3ffff 64bit] pci 0000:01:00.0: reg 20: [io 0xe000-0xe0ff] pci 0000:01:00.0: reg 30: [mem 0xf7e00000-0xf7e1ffff pref] pci 0000:01:00.0: supports D1 D2 pci 0000:02:00.0: [1002:6719] type 0 class 0x000300 pci 0000:02:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:02:00.0: reg 18: [mem 0xf7d20000-0xf7d3ffff 64bit] pci 0000:02:00.0: reg 20: [io 0xd000-0xd0ff] pci 0000:02:00.0: reg 30: [mem 0xf7d00000-0xf7d1ffff pref] pci 0000:02:00.0: supports D1 D2 vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=none,locks=none vgaarb: bridge control possible 0000:02:00.0 vgaarb: bridge control possible 0000:01:00.0 pci 0000:01:00.0: Boot video device [drm] radeon kernel modesetting enabled. radeon 0000:01:00.0: setting latency timer to 64 radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF [drm] radeon: 1024M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. radeon 0000:01:00.0: irq 46 for MSI/MSI-X radeon 0000:01:00.0: radeon: using MSI. [drm] radeon: irq initialized. radeon 0000:01:00.0: WB enabled [drm] radeon: ib pool ready. [drm] radeon: power management initialized fbcon: radeondrmfb (fb0) is primary device fb0: radeondrmfb frame buffer device [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0 radeon 0000:02:00.0: enabling device (0000 -> 0003) radeon 0000:02:00.0: setting latency timer to 64 radeon 0000:02:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used) radeon 0000:02:00.0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF [drm] radeon: 2048M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. radeon 0000:02:00.0: irq 49 for MSI/MSI-X radeon 0000:02:00.0: radeon: using MSI. [drm] radeon: irq initialized. radeon 0000:02:00.0: WB enabled [drm] radeon: ib pool ready. [drm] radeon: power management initialized fb1: radeondrmfb frame buffer device [drm] Initialized radeon 2.12.0 20080528 for 0000:02:00.0 on minor 1 [drm] radeon: finishing device. radeon 0000:02:00.0: ffff88041a941800 unpin not necessary [drm] radeon: ttm finalized pci-stub 0000:02:00.0: claimed by stub pci-stub 0000:02:00.0: irq 49 for MSI/MSI-X This causes the Win7 VM to bluescreen on boot. How can I configure things so that the radeon module only attaches to the 6570 and not the 6950?

    Read the article

  • Unable to Set Up Remote Access on Windows Home Server

    - by Matt Hanson
    When trying to turn on Remote Access on my Windows Home Server (HP MediaSmart Ex485, MediaSmart Server 3.0, Power Pack 3), I am not able to continue through the wizard as this first check fails: "Verifying that your remote Web site is available locally" Everything else on the server works fine, including being able to: Ping server RDP to server Access all shares as expected Browse to both http://servername and http://servername:55000 I have noticed though that I am unable to browse to http://servername:56000 as I should be able to do. I've performed a server recovery to reset the installation to factory defaults, with no such luck.

    Read the article

  • VMware Workstation reboot 32-bit host when starting 32/64-bit guest using VT-x

    - by Powerman
    I'm trying to start 64-bit guest (MacOSX and Windows7) on 32-bit host (Hardened Gentoo Linux, kernel 2.6.28-hardened-r9) using VMware Workstation (6.5.3.185404 and 7.0.1.227600). If VT-X disabled in BIOS, VMware refuse to start 64-bit guest (as expected). If VT-X enabled in BIOS, VMware start guest without complaining, but then, in about a second (I suppose as soon as guest try to switch on 64-bit) my host reboots (actually, it's more like reset - normal reboot procedure skipped and BIOS POST start immediately). My hardware is Core 2 Duo 6600 on ASUS P5B-Deluxe with latest stable BIOS 1101. I've power-cycled system, then enabled Vanderpool in BIOS. My CPU doesn't support Trusted Execution Technology, and there no way to disable it in BIOS. I've rebooted several times after that, sometimes with power-cycled, and ensure Vandertool is enabled in BIOS. I've also run VMware-guest64check-5.5.0-18463 tool, and it report "This host is capable of running a 64-bit guest operating system under this VMware product.". About a year ago I tried to disable hardened in kernel to ensure this isn't because of PaX/GrSecurity, but that doesn't help. I have not checked 32-bit guests with VT-X enabled yet, but without VT-X they works ok. ASUS provide "beta" BIOS updates, but according to their descriptions these updates doesn't fix this issue, so I'm not sure is it good idea to try it. My best guess now it's motherboard/BIOS bug. Any ideas? Update 1: I've tried to boot vt.iso provided at http://communities.vmware.com/docs/DOC-8978 and here is it report: CPU 0: VT is enabled on this core CPU 1: VT is enabled on this core Update 2: I've just tried to boot 32-bit guests (Windows7, Ubuntu9.04 and Gentoo) using all possible virtualization modes. In Automatic, Automatic with Replay, Binary translation everything works, in Intel VT-x/EPT or AMD-V/RVI I got message "This host does not support EPT. Using software virtualization with a software MMU." and everything works. BUT in Intel VT-x or AMD-V mode all 32-bit guests reset host just like 64-bit guests! So, this issue is not specific to 64-bit guests. One more thing. Using Intel VT-x or AMD-V mode for both 32/64-bit guests my host reset right after starting VM, i.e. before VM BIOS POST and before guest even start booting. But using Intel VT-x/EPT or AMD-V/RVI VM BIOS runs ok, then 64-bit guests start booting (Windows7 completed "Loading files" progressbar), and only after that host reset.

    Read the article

  • MacBook hangs when restarting to Vista through BootCamp

    - by John
    I have Vista Pro installed on my Macbook and while it mostly works well, sometimes when I select Windows from the boot screen after turning the thing on, the screen just goes black and it all stops. If I hold the power button until it powers down and repeat, it works. It's not getting as far as Windows at all, I think, because if Windows was previously shut down to Hibernate, it still restores fine... and I'm pretty sure if Windows' startup had hung and been force-rebooted my session would be borked?

    Read the article

  • Logitech Media Elite Func button

    - by Noam Gal
    I have the aforementioned keyboard, and occasionally the "Func" key will get unpressed. It gets especially annoying when I try to rename a file, and start winword by accident, or try to refresh a page, and nothing happens (It's the undo - no effect inside a browser usually). I know I can rebind those keys to just do nothing, but I just wanted to know why does the func mode changes by itself? Can it be something with power management/screen saver?

    Read the article

  • How to fix an external HDD?

    - by Bogdan
    Hi, I have a Verbatim 1080p external HDD (47535 model). When i plug it in, the power and the hdd leds are lighting, but it has an anoying sound every half second or so. Is there any posibility to fix it OR retrieve my data? Or is a mechanical problem? Thanks!

    Read the article

  • WD1000FYPS harddrive is marked 0 mb in 3ware (and no SMART)

    - by osgx
    After reboot my SATA 1TB WD1000FYPS (previously is was "Drive error") is marked 0 mb in 3ware web gui. Complete message: Available Drives (Controller ID 0) Port 1 WDC WD1000FYPS-01ZKB0 0.00 MB NOT SUPPORTED [Remove Drive] SMART gives me only Device Model and ATA protocol version 1 (not 7-8 as it must be for SATA) What does it mean? Just before reboot, when is was marked only with "Device Error", smart was: Device Model: WDC WD1000FYPS-01ZKB0 Serial Number: WD-WCASJ1130*** Firmware Version: 02.01B01 User Capacity: 1,000,204,886,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Sun Mar 7 18:47:35 2010 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled SMART overall-health self-assessment test result: PASSED SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0003 188 186 021 Pre-fail Always - 7591 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 229 5 Reallocated_Sector_Ct 0x0033 199 199 140 Pre-fail Always - 3 7 Seek_Error_Rate 0x000e 193 193 000 Old_age Always - 125 9 Power_On_Hours 0x0032 078 078 000 Old_age Always - 16615 10 Spin_Retry_Count 0x0012 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0012 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 77 192 Power-Off_Retract_Count 0x0032 198 198 000 Old_age Always - 1564 193 Load_Cycle_Count 0x0032 146 146 000 Old_age Always - 164824 194 Temperature_Celsius 0x0022 117 100 000 Old_age Always - 35 196 Reallocated_Event_Count 0x0032 199 199 000 Old_age Always - 1 197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 What can be wrong with he? Can it be restored? PS new smart is === START OF INFORMATION SECTION === Device Model: WDC WD1000FYPS-01ZKB0 Serial Number: [No Information Found] Firmware Version: [No Information Found] Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 1 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Mon Mar 8 00:29:44 2010 MSK SMART is only available in ATA Version 3 Revision 3 or greater. We will try to proceed in spite of this. SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 82-83 don't show if SMART supported. Checking for SMART support by trying SMART ENABLE command. Command failed, ata.status=(0x00), ata.command=(0x51), ata.flags=(0x01) Error SMART Enable failed: Input/output error SMART ENABLE failed - this establishes that this device lacks SMART functionality. A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options. PPS There was a rapid grow of " 192 Power-Off_Retract_Count " before dying. The hard was used in raid, with several hards from the same fabric packaging box (close id's). The hard drives were placed identically. Rapid means almost linear grow from 300 to 1700 in 6-7 hours. Maximal temperature was 41C. (thanks to munin's smart monitoring)

    Read the article

  • How do you reset a Nexxt 54M Wireless AP Router?

    - by Fernando
    I have this Nexxt router, and I haven't been able to reset it correctly. I pressed the thin button in the back (which you have to press with a pen point or something similar, really slim), but haven't managed to make it work. The CPU, WLAN and power lights go on and remain still. The lights for the connected cables don't turn on...

    Read the article

  • 2.0 speeds on USB hub?

    - by Matthew Robertson
    How capable are USB hubs? I have an AirPort Extreme router with a printer attached (it's not powered by USB). I want to extend this and add two hard drives (one for Time Machine and the other for EyeTV recordings). Can a 4-port USB hub (I'm considering this one) achieve USB 2.0 speeds and power the hard drives? What difference would a self-powered vs externally-powered hub produce?

    Read the article

  • Xenserver 5.5 U2 a bit unstable with an unstable W2003 VM

    - by twistedbrain
    In the last week I had to reboot the host system twice and the second one by means of the power button. The system is a Dell PE 6950 (4 Opteron dual core, 2,8 Ghz, 16 GB RAM, 900 GB disk in a RAID 10 array composed by 4 450GB 15000 rpm disks) with XenServer 5.5 U2. We're installing it and at now there are working in production a 2003 32 bit Windows server VM with 2 GB RAM, 3 vcpu and about 200 GB disk in 4 partition (12 GB boot, 20 GB program, 80 GB user data, 80 GB other data). The first time I was compressing many Windows 2003 folders (some tens GB by means of W2003 compressed folder option) from a Windows remote console and some hours before my colleague installed Backup Exec agent that was alredy installed and that required a reboot (that was pending). The console stopped responding, it was no more possible to connect by means of remote console or by means of the console of the XenCentre, it was still possible from the network to use the shared folder of the VM and the programs on it (2 db and a GIS program), but the print server didn't work any more and I couldn't give remote reboot from other domain controller hosts. I couldn't stop the virtual machine neither from the XenCentre, neither from the command line of the host also forcing the reboot. I had to reboot the host server. Yesterday it has been worst. I installed a template of another VM, CentOS 5.3 and then, put the DVD in the drive of the host. Then, before the install and after the boot I checked for defect the DVD and the W2003 VM began to respond slowly (I was connected by means of an administration remote console) the task manager showed only mid or low load, it is, only the first of the 3 vcpu was loaded (about 70%), while the other two were about at 20% and also the disk I/O was not so heavy. Then the users were not so happy because they couldn't any more use the MS word docs on the server. I immediately stopped the check of the DVD (to do that I had to force the stop of such Centos 5.3 VM), then some users could again use their docs, but other had still problems, so I decided to reboot the VM, but it doesn't stopped, neither from XenCenter, neither from command line, neither forcing the reboot. Then I tried to reboot of the host, but it didn't worked, neither from the XenCentre, neither from the host prompt (shutdown -r now as root: it told that it was shutting down, but then it didn't did that). So I had to power off by means of the power button of the server (before I tried some Magic SyS REQ, but I saw that Xen isn't compiled with this option enabled). What could you suggest about my problem, what can I look, search and see? In the W2003 VM logs there are no errors or warning to explain what happened. Some more exciting, amusing and inspiring words of poetry (the facts happened around 11 am): \# egrep -i 'err|warning' xensource.log [20100219 10:32:05.597|debug|culo|6301 unix-RPC|VBD.plug R:c81bcda701f6|xenops] watch: watching xenstore paths: [ /xapi/0/frontend/vbd/51712/hotplug; /local/domain/0/backend/vbd/0/51712/tapdisk-error ] with timeout 1200.000000 seconds [20100219 10:32:05.597|debug|culo|6301 unix-RPC|VBD.plug R:c81bcda701f6|xenops] watch: fired on /local/domain/0/backend/vbd/0/51712/tapdisk-error [20100219 10:32:14.314|debug|culo|6335 unix-RPC|VBD.unplug R:9258f54578d6|xenops] watch: watching xenstore paths: [ /local/domain/0/backend/vbd/0/51712/shutdown-done; /local/domain/0/error/device/vbd/51712/error ] with timeout 1200.000000 seconds [20100219 10:32:14.337|debug|culo|6335 unix-RPC|VBD.unplug R:9258f54578d6|xenops] xenstore-rm /local/domain/0/error/backend/vbd/0 [20100219 10:32:14.337|debug|culo|6335 unix-RPC|VBD.unplug R:9258f54578d6|xenops] xenstore-rm /local/domain/0/error/device/vbd/51712 [20100219 10:32:14.338|debug|culo|6335 unix-RPC|VBD.unplug R:9258f54578d6|xenops] watch: fired on /local/domain/0/error/device/vbd/51712/error [20100219 10:53:48.903|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|helpers] Ignoring exception: INTERNAL_ERROR: [ Xb.Noent ] while Vmops.destroy_domain: Destroying domid 14 guest session [20100219 10:53:52.048|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/0/error/backend/tap/14 [20100219 10:53:52.048|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/14/error/device/vbd/51744 [20100219 10:53:52.085|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/0/error/backend/tap/14 [20100219 10:53:52.086|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/14/error/device/vbd/51728 [20100219 10:53:52.122|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/0/error/backend/tap/14 [20100219 10:53:52.122|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/14/error/device/vbd/51712 [20100219 10:53:52.127|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/0/error/backend/vbd/14 [20100219 10:53:52.128|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/14/error/device/vbd/51760 [20100219 10:53:52.496|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] Device.Vif.hard_shutdown about to blow away backend and error paths [20100219 10:53:52.497|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/0/error/backend/vif/14 [20100219 10:53:52.497|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/14/error/device/vif/0 [20100219 10:53:53.385|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] Device.Vif.hard_shutdown about to blow away backend and error paths [20100219 10:53:53.386|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/0/error/backend/vif/14 [20100219 10:53:53.386|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/14/error/device/vif/1 [20100219 10:53:53.389| warn|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|hotplug] Warning, deleting 'vif' entry from /xapi/14/hotplug/vif/0 [20100219 10:53:53.391| warn|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|hotplug] Warning, deleting 'vif' entry from /xapi/14/hotplug/vif/1 [20100219 11:20:49.766|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|helpers] Ignoring exception: INTERNAL_ERROR: [ Xb.Noent ] while Vmops.destroy_domain: Destroying domid 11 guest session [20100219 11:20:50.339|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|xenops] xenstore-rm /local/domain/0/error/backend/tap/11 [20100219 11:20:50.339|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|xenops] xenstore-rm /local/domain/11/error/device/vbd/832 [20100219 11:20:50.360|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|xenops] xenstore-rm /local/domain/0/error/backend/tap/11 [20100219 11:20:50.360|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|xenops] xenstore-rm /local/domain/11/error/device/vbd/768 [20100219 11:20:50.366|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|xenops] xenstore-rm /local/domain/0/error/backend/vbd/11 [20100219 11:20:50.366|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|xenops] xenstore-rm /local/domain/11/error/device/vbd/5696 [20100219 11:20:50.753|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|xenops] Device.Vif.hard_shutdown about to blow away backend and error paths [20100219 11:20:50.754|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|xenops] xenstore-rm /local/domain/0/error/backend/vif/11 [20100219 11:20:50.754|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|xenops] xenstore-rm /local/domain/11/error/device/vif/1 [20100219 11:20:50.757| warn|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|hotplug] Warning, deleting 'vif' entry from /xapi/11/hotplug/vif/1 [20100219 11:28:13.803|debug|culo|6610 inet-RPC|Connection to VM console R:e9f8b76e8975|console] error: INTERNAL_ERROR: [ Unix.Unix_error(63, "connect", "") ]

    Read the article

  • XServe won't let me log in

    - by niklassaers
    Hi guys, After a power-failure, my Xserve won't let me log in on the login screen. I can still SSH into the box and access its other services, but the login box just shakes when I write either a local username and password or an ldap based username and password (this server is the LDAP server). Any suggestions on how I can go about solving this problem? Cheers Nik

    Read the article

  • How to recover data from an external HDD?

    - by Bogdan
    Hi, I have a Verbatim 1080p external HDD (47535 model). When i plug it in, the power and the hdd leds are lighting, but it has an anoying sound every half second or so. Is there any posibility to fix it OR retrieve my data? Or is a mechanical problem? Thanks!

    Read the article

  • How to recover data from an external HDD?

    - by Bogdan
    Hi, I have a Verbatim 1080p external HDD (47535 model). When i plug it in, the power and the hdd leds are lighting, but it has an anoying sound every half second or so. Is there any posibility to fix it OR retrieve my data? Or is a mechanical problem? Thanks!

    Read the article

  • Noisy compaq 610 laptop

    - by Dave
    Hi, I just bought a new compaq 610 laptop and the fan seems to be constantly on. I updated the bios and am using their recommended power settings. Am I missing something? Is there anything I can do to fix it?

    Read the article

< Previous Page | 97 98 99 100 101 102 103 104 105 106 107 108  | Next Page >