Search Results

Search found 3985 results on 160 pages for 'hd dvd'.

Page 102/160 | < Previous Page | 98 99 100 101 102 103 104 105 106 107 108 109  | Next Page >

• Computer POST's and draws the BIOS screens very slowly - Motherboard issue?

  - by Ssvarc

  I have a desktop that refuses to boot into Windows. I used Hitachi DFT and the HD came back OK. I then used Memtest86+ and it took hours for the test to run. After 8+ hours it was up to test number 6. I aborted and ran Memtest86. It ran at basically the same speed. I aborted and went to look at the BIOS settings. The computer is running slow at POST. It takes a long time for the keyboard to be recognized, etc. The BIOS settings takes time to be (slowly) drawn on the screen. What could be causing such behavior? EDIT: I gave back the computer a while back without ever discovering the cause so I'm closing the question.

  Read the article

• Computer still in boot loop

  - by user2856410

  My computer is in a boot loop and despite all my efforts, I haven't been able to load windows XP with it. When the computer loads, I see some white loading bar at the bottom, then the windows XP loading screen, then the DELL boot screen, then windows XP loading screen, and it just keeps looping. The blue screen error is: UNMOUNTABLE_BOOT_VOLUME Stop: 0x000000ED (0x823D6C08, 0xC000009C, 0x000000000, 0x000000000) I have booted using Hiren's mini XP, and ran CHKDSK /f /r, but it didn't affect the boot loop. Is there anything else I can try to get my computer to start up? I don't have my windows XP disc, but I have a dvd burner on another computer, and can burn a downloaded ISO if it could help me get out of this loop. Thanks!

  Read the article

• How to copy directories using debugfs?

  - by tjbp

  The debugfs manpage gives the impression that the command 'rdump . .' will recursively copy all files found on the specified filesystem from the debugfs cwd to the native filesystem's cwd. Instead I seem to receive a syntax error, and no copy is initiated? These are the commands I run: cd /path/to/transfer/destination debugfs /dev/sda1 -R rdump . . My task is to copy the entire contents of a clean yet unmountable USB storage device to its host machine's HD. The host machine does not support the inode size used by the USB device's filesystem (256) and its software is not upgradeable, so my intention was to use debugfs to transfer the files. If anyone has any other suggestions for this task I'd be grateful.

  Read the article

• How do I fix Handbrake mp4s that produce Error -2041 when loaded in QuickTime?

  - by magnifico

  After encoding a DVD video to MP4 using Handbrake 0.9.4(2009112300) using the High Profile preset, my video will not open in QuickTime. I receive the following error: Error -2041: An invalid sample description was found in the movie (Movie.mp4) Here is the preset used to encode the video: <Preset> <Category>Regular</Category> <Name>High Profile</Name> <Query>-e x264 -q 20.0 -a 1,1 -E faac,ac3 -B 160,160 -6 dpl2,auto -R 48,Auto -D 0.0,0.0 -f mp4 --detelecine --decomb --loose-anamorphic -m -x b-adapt=2:rc-lookahead=50</Query> <PictureSettings>true</PictureSettings> <Version>0.9.4</Version> </Preset> How can I adjust this preset or fix the files so that they will play in QuickTime?

  Read the article

• Missing graphics accelerator for Toshiba C855D-s5232

  - by user2387429

  I formatted the drive and re-installed Windows 7 64-bit on a Toshiba Satellite C855D-S5232. Now I am missing the graphics accelerator. I have been to Toshiba's website but cannot find the right one. Same is so for AMD. It has AMD E1-1200 APU with Radeon HD Graphics. The machine is recognizing a standard VGA. I ordered a recovery disk on eBay and it was supposed to be here yesterday. Can anyone help with other options?

  Read the article

• Dedicated GPU in Dell PowerEdge C1100

  - by Eli Gundry

  We recently purchased a Dell PowerEdge C1100 off lease with the initention of using it for graphics processing. We installed an AMD HD 7000 series GPU in it that runs off of board power and it sends video to the display. That said, the video is very choppy, leading us to belive that the onboard video is doing all the processing and sending it to the card. Is there any way to either disable the VGA on this server or tell the OS to only use the dedicated card. More info: The server is running REHL 6.4 The graphics running the proprietary AMD drivers The video card only works in OS and does not show the BIOS on boot (we know that it's impossible to change this) Any ideas, guys? Update We are now thinking that the GPU is doing the graphics processing, but not working at the full speed of the PCI bus. Which is odd, because it is an x16 slot, but probably optimized to use a RAID card (if that makes any sense). Is there any way to remedy the choppy graphics on this server?

  Read the article

• How do I get VDPAU working with Ubuntu 9.1?

  - by Brad Robertson

  What do I need to do to get MKV HD videos playing with VDPAU and also Blu-ray discs? Lots of people say you need to compile the latest MPlayer (which I haven't had luck doing) for VDPAU. I found an mplayer ppa that says it has VDPAU compiled into it so I'd like to use that. What packages do I need for playing MKV files and Blu-ray with the video decoding offloaded to my GPU? So far I haven't had any luck with any of the tutorials I've found. I'm just looking for a quick synopsis that will tell me what I'm looking for as I'm kind of shooting in the dark. (I didn't know what VDPAU was until a few days ago.)

  Read the article

• Ubuntu OpenLDAP and Mac OS X Roaming Profiles

  - by Sam Hammamy

  Today, I'm installing OpenLDAP on Ubuntu 11.04. I have gone through the installation before a few times, but what I have never been able to do is use Mac OSX Lion's Directory Utility to administer the LDAP server, and also never got roaming profiles working. SO the question is: 1) Is there a configuration I need in OpenLDAP so I can administer it remotely. I vaguely remember something like that, but I can't find the answer online. 2) What do I need to setup roaming profiles for a mac os x. I'd like to backup all my laptop data to the LDAP's machine, and potentially, also backup with time machine to an external HD mounted no the Ubutnu machine (but that's a few days ahead of time for now).

  Read the article

• Can the NVIDIA ION chipset handle streaming and gaming reasonable well?

  - by true_gritt

  I'm considering getting a small-footprint "nettop" computer to use as a home theater PC with my Samsung LN40A550 HDTV. I've been looking at systems like the AS Rock ION HT330, the Acer AspireRevo 3610, or the Asus EeeBox PC EB1501. These are all systems with NVIDIA ION chipset (Intel Atom N330 dual core CPU + NVIDIA GeForce 9400 GPU). Is the NVIDIA ION chipset powerful enough to support media streaming at HD resolutions (e.g. via Boxee, Hulu, Netflix) and casual gaming (e.g. World of Warcraft, Madden NFL) reasonably well without herky-jerky video output?

  Read the article

• Ubuntu 14.04 disk utility SMART self-test failed threshold not exceeded

  - by user2323470

  I'm using the "Disks" program in Ubuntu 14.04 (live DVD) to assess the health of a drive I suspect is failing. However, when I first opened the program, it showed that the overall health was OK and all assessments are OK as well. I then tried to run a short self-test, but now the overall assessment shows a red "SELF-TEST FAILED". In the details section it says "Last self-test failed (read)" and "threshold not exceeded". All individual assessments are still OK though!! What I don't understand is, does that mean that the test executed and determined that the drive is a goner, or does it mean that the test didn't actually execute properly?

  Read the article

• Can't Use Switchable Graphics

  - by Rev

  I can't get my switchable graphics cards working on my Acer 4820TG laptop. It came installed with Windows 7, but I've installed the RTM build of Windows 8. I have to keep the "Graphics" setting on the BIOS set to "Discrete," if it's set to "Switchable" the screen turns black after the boot animation is complete. The machine has an Intel graphics card and an AMD Mobility Radeon HD 5650, and I know that the Intel card is working. I've seen it work a couple of times with Windows 8 installed, but for some reason it just doesn't anymore. I know that it's not broken, because when I plug in a secondary monitor, and move the cursor to the right, I can see it on that monitor. Are there drivers or something I need to install? I've tried a number of drivers and utilities from Acer's website, none of which have fixed the problem.

  Read the article

• unable to install new versions of linux on my PC

  - by iamrohitbanga

  I have an MSI-RC410 motherboard with onboard ATI Radeon XPress 200 series Graphics card. I have used OpenSuse-11.0 on my PC for over an year. but when I tried to upgrade to OpenSuse-11.1, I managed to install it only to find that several features were missing. for example /dev/cdrom was missing. Also install DVD of Fedora 11 did not work. I have also tried Ubuntu-9.10 live cd. When I boot from the CD i get the initramfs command prompt. Still able to install old versions of these OSs. What is the reason for this behavior? Does it have to do anything with the new version of the linux kernel not being compatible with my hardware? What should i do to install new versions of Linux?

  Read the article

• Use Internet Explorer 6 and 7 in Virtual Box.

  - by Sharon

  Hello. I am trying to install the vhds (virtual hard drive image) of IE6 on XP and IE 7 on XP packs available from Microsoft on Virtual Box. Virtual Box will only mount CD/DVD's and/or ISO's. How do I get it to use the Microsoft files? I need this to test web pages in IE6/IE7s. I am running Windows 7 Home Premium. Is there a way to do this, or another way that will allow me to load XP/IE6 and XP/IE7 in Virtualbox Edit: Ok I got it to work but it says XP must be updated in 3 days due to hardware changes. Microsoft said this would be activated til January 1st 2010. Is there a way to bypass that?

  Read the article

• VMWare Workstation Performance

  - by tekiegreg

  Hi there, awhile ago I upgraded my laptop to Windows 7 x64 from Windows XP 32 bit edition. However not before virtualizing the physical installation and I continue to run it under VMWare Workstation today. The performance on the resulting VM is just absolutely atrocious! I've done a lot of uninstalling stuff that's not longer needed since the machine is virtual in an effort to reduce RAM, but in general the responsiveness seems sluggish. I also run the Virtual Machine on it's own separate HD that is seldom used by the host OS. I'm just hoping for some general tips in increasing VMWare performance anywhere, thoughts? EDIT: Both of the below answers were excellent starting points for me. However I did like the selected answer's strategies on disk management. I am running the Virtual Machine in a separate external hard disk, likely I'm going to have to reconfigure somehow. Thanks all!

  Read the article

• Help importing video from old Sony digital tape HandyCam

  - by thatryan

  Some friends gave me their old HandyCam and a bunch of tapes asking me to put them on a DVD. The model is Sony DCR-TVR103 and it records onto Hi8 digital tapes. It has a firewire port also. I am trying to use import function in iMovie on OS X 10.6. Every import though the video is super fast, like playing in fast forward. Ever seen anything like this? How can I import this video? Thank you.

  Read the article

• Why does my Mac always crash when I enable `ask for password after screensaver ended`?

  - by Koning Baard XIV

  I have enabled these two things: Placing the mouse-pointer in the bottom-left corner of any display makes the screensaver appear After the screensaver or stand-by has ended, ask for password However, this combination always leads to this (Black Screen of Death) after entering the screensaver with the bottom-left corner: Here are my system specs: Hardware Overview: Model Name: iMac Model Identifier: iMac9,1 Processor Name: Intel Core 2 Duo Processor Speed: 2,66 GHz Number Of Processors: 1 Total Number Of Cores: 2 L2 Cache: 6 MB Memory: 2 GB Bus Speed: 1,07 GHz Boot ROM Version: IM91.008D.B08 SMC Version (system): 1.44f0 Serial Number (system): W89171JF0TF Hardware UUID: 323A90F0-8A2F-5057-B501-2087489E0DFF System Software Overview: System Version: Mac OS X 10.6.3 (10D573) Kernel Version: Darwin 10.3.0 Boot Volume: Macintosh HD Boot Mode: Normal Computer Name: YOU SHOULD NOT KNOW THIS User Name: YOU SHOULD NOT KNOW THIS Secure Virtual Memory: Not Enabled 64-bit Kernel and Extensions: No Time since boot: 11:46 Can anyone help me? Thanks

  Read the article

• Windows 7 EFI Partition Deleted

  - by Sam Clark

  I converted my Windows 7 GPT disk to dynamic, which resulted in it being unable to boot. So I used EaseUs Partition Master on my second Win 7 installation to convert the disk back to basic. Now, I have one partition, which is my C: drive, and I can't figure out how to recovery my EFI partition. I no longer see the "Windows" entry in my EFI boot menu. The Windows 7 repair on the install DVD doesn't see my installation. Please let me know how to restore the EFI partition.

  Read the article

• Laptop Touch-pad stops working after reattaching parts

  - by kb67

  I was trying to replace my LCD screen for the first time, and it was a very hard process to do. I had to unscrew everything from the bottom of the laptop (Ram, HD, etc) and detach everything that was under the keyboard. After reattaching the LCD, putting everything back together, the touch-pad has stop working. Everything works except for that. Anybody know why it stopped working? I have an HP G61-429WM Laptop. Sorry if this was the wrong place to ask.

  Read the article

• Windows 8.1 unable to play Music or the Audio from videos through Optical Out

  - by Zion Fox

  I am having an issue with my audio output, where any music file, and the audio side of videos are not being played through my optical audio output. I am running a Realtek HD Audio device built on Revision 1.0 on a GA-P55A-UD6 Gigabyte Board, which runs through it's optical output to an Astro A40 Mixamp, which does some upscaling before sending it to the headset. Now, notification sounds, and sounds/videos/music played through the browser or programs like Skype or games are working fine. This seems to specifically effect Foobar2000 and Media Player Classic. I have updated these two programs to their latest revisions, in addition to the soundcard drivers to no avail, and searching the error code thrown by Foobar2000: Unrecoverable playback error: The parameter is incorrect. (0x80070057) through Google returns not very helpful results, other than the one potentially mentioning DRM. This issue I am having a very hard time resolving, and am wondering if anyone here has experienced similar issues after updating.

  Read the article

• Unable to mount portable hard drive on Ubuntu

  - by VoY

  My portable hard drive (WD My Passport), which used to work correctly now does not automount on my Ubuntu system. It does work on a Windows machine or even when plugged into WD HD TV, which is a Linux based device. There's one NTFS partition spanning the whole drive. When I plug the disk in, I see the following in dmesg: [269259.504631] usb 1-2.2: new high speed USB device using ehci_hcd and address 20 [269259.604674] usb 1-2.2: configuration #1 chosen from 1 choice However it does not mount in GNOME and I don't see it when I type: sudo fdisk -l Any suggestions why this might be? I repaired the partition using chkdsk on Windows, so the issue is probably not filesystem related.

  Read the article

• Moving my bcd from HDD to SSD - Windows 7

  - by lelouch

  I have windows 7 installed on my SSD, but the /boot/ and bootmgr are on my hard-drive. I want to move them to my SSD for faster booting times. So i figured that I can fix the problem using the Windows startup repair tool. I made a bootable windows 7 flash drive, and ran Windows startup repair. However, it exits with an error. I also can't see my OS in the list of installed OSs. I then tried fixing via the command prompt with bootrec /fixmbr, bootrec /fixboot, bootrec /rebuildbcd. Bootrec /rebuildbcd finds the OS, but gives me the error "The requested system device cannot be found" when i try fixing it. Does anyone know why this is failing? I read somewhere that the Windows Repair environment doesn't support a flash drive, which is why I'm getting that error. Is this true? Unforunately my dvd drive is playing up so I can't use it to test this.

  Read the article

• What is the S.M.A.R.T. page?

  - by Mads Skjern

  I've just listened to Steve Gibson talk about his SpinRite software, on the Security Now podcast episode 336 (transscript). At 33:20 he says: I can show and do show on the SMART page that sectors are being relocated and that errors are being corrected. That SMART analysis page sometimes scares people because it shows, wait a minute, this thing says we're correcting so many errors per megabyte. What is this SMART page? 1) Some information saved on the HD by SMART, that I can access with a SMART tool like smartmontools? 2) A page (tab) in his SpinRite software? In any case, can I see, in any way, what sectors are marked as bad, without using SpinRite? Preferably using smartmontools!

  Read the article

• Copying Firefox profile

  - by ChrisW

  My computer (well, Windows XP) failed. I got everything off the HD, including my Firefox profile, which I especially wanted because I had lots of open unsaved tabs in my current session (yes, I know that's bad practice!), but also to rescue bookmarks etc. I've now got Windows 7, and reinstalled Firefox. I've read the instructions on the Firefox website about creating new profiles, and I'm not sure they're very intuitive. It says that you can copy all the contents from an old profile into a new 'default' one, which I have done (http://support.mozilla.org/en-US/kb/back-and-restore-information-Firefox-profiles). However, when I open Firefox, the data from this profile isn't being used and Firefox doesn't seem to recognise the data that's there. What am I doing wrong?!

  Read the article

• Robocopy Mirror Backup gone awry

  - by Aznfin

  I have created a simple batch file script for running Robocopy. It is set to make a backup of my user account folder to my external hard drive. Here's the parameters for Robocopy: ROBOCOPY "C:\Users\Finnly" "F:\Backups\Finnly (Backup)" /ZB /COPY:DAT /DCOPY:T /MIR /256 /MT:32 /XF *.log *.log* *.dat *.tmp *.temp *.old "ntuser*" "SyncToy*" "UpgKit.txt" ".recently-used.xbel" /XD ".gimp-2.6" ".thumbnails" ".VirtualBox" "AppData" "Application Data" "Adobe" "Camtasia Studio" "Cookies" "CyberLink" "DivX Movies" "DVD Architect Pro 5.0 Projects" "dwhelper" "GTA San Andreas User Files" "Lightroom" "Local Settings" "NetHood" "PrintHood" "Scripts" "temp" "Templates" "The KMPlayer" "Tracing" /R:3 /W:10 /V /TS /FP /ETA /LOG+:F:\Backups\Sync.log /TEE For some reason when I run it, it backs up the files and then it seems to back them up again. The size of my user account directory is 18.3 GB but the backup of it occupies over 30 GB. After reading the contents of the log generated, it is obvious that it's copying files more than once. Why is this happening? I'm running Windows Seven Home Premium 64-bit.

  Read the article

• Triple ghost animated cursor

  - by R G A

  Since installing the driver for Intuos 4 Graphics tablet, animated cursors display as a triple ghost cursor. I cannot find any reference to this problem elsewhere. System specifications: new Dell XPS, Windows 7, ATI Mobility Radeon HD 4670. Graphics tablet and graphics software are virtually useless since the cursor hotspot is nearly impossible to identify. All drivers and software are current. Any thoughts? Vendors deny any knowledge or responsibility. Removing the Intuos driver does not fix this.

  Read the article

< Previous Page | 98 99 100 101 102 103 104 105 106 107 108 109  | Next Page >