Search Results

Search found 3985 results on 160 pages for 'hd dvd'.

Page 105/160 | < Previous Page | 101 102 103 104 105 106 107 108 109 110 111 112  | Next Page >

• Unable to create system partition or locate existing system partition during Windows-7 installation

  - by glenneroo

  I have Windows XP 32-bit installed on an ASUS A8N-SLI Deluxe with 2x 500gb drives in RAID1 using the NV RAID controller. On this there are 3 partitions (XP, XP backup and DATA) There are also 4x 500gb drives in RAID10 using the Silicon Image 3114R RAID controller. I just purchased a Windows 7 64-bit as an ISO download upgrade version which I promptly burned to DVD and attempted to perform an upgrade installation. Here is the error message I am getting: Firstly, where are these "Setup log files" located? Second, does this mean I need to find compatible (64-bit?) drivers for the Mainboard and put them on floppy? EDIT: As suggested on another forum, I tried downloading the nVidia Mainboard RAID drivers for Windows 2003 64-bit. I loaded the drivers successfully using the Load Driver button, but pressing NEXT still returns this error.

  Read the article

• Re-assembling the RAID-5 array reboots my CentOS-5 machine

  - by xraminx

  I have 3 HDD's, each divided into 3 partitions. I had created a RAID-1 for boot partition md0 created from sda0, sdb0 and had also created two RAID-5 arrays: md1 created from sda1, sdb1, sdc1 md2 created from sda2, sdb2, sdc2 It used to work fine but one day I had to power off the machine (cold reboot) to get any response from the machine. After that, when the system started booting, it tried for a while to reconstruct the RAID arrays but after a few minutes it crashed silently. I booted the system in linux rescue mode from the DVD and tried to re-assemble the RAID devices manually. I was able to re-assemble md0 and md1 using: mdadm --assemble --scan /dev/md0 mdadm --assemble --scan /dev/md1 But when I try to re-assemble md2 using: mdadm --assemble --scan /dev/md2 the system reboots silently again. How can I fix this problem?

  Read the article

• Minimum power requirement for VGA vs. its working

  - by Shiki

  Got a new XFX GTX260^2 video card. The only problem is the "Minimum power" is 500W on the box. I've got a Chieftec 450AA PSU with just a minimal number of attached stuff (1hdd, WD green; 6gb (4module) ram; dvd writer). Bought a cable for the 6pin power input on the card. Got picture, works in every aspect. Still. Should I get a new PSU (like a Corsair or Antec 600W)? Will the card perform slower with this PSU? (Yeah the last part is a particular question but in I'm also asking in generic. I was wondering about this so many times and I hope we'll put and end for this question for once and for all.)

  Read the article

• How to vertically split widescreen into two virtual workspaces on ubuntu/gnome?

  - by David

  My new laptop has a big 16:9 screen, and I'm finding it hard to fully utilize it during the 95% of the time that I'm not watching HD movies on it. I'd like to set it up as a kind of virtual dual screen by splitting the physical screen into two workspaces. I know I could arrange my windows manually, but I'd like to be able to maximize a window and have it only consume half the monitor, and have its pop up dialogs centered on its half-screen, that sort of thing. Is there some kind of plug in available to do this? Thanks in advance for any pointers.

  Read the article

• Linux and GEForge 8400 dual monitor

  - by Andrea Polci

  I'm trying to install a linux distribution on my PC. I have a GEForce 8400 GS with two connected monitors. I tried with fedora 12 and ubuntu 9.1 (both 64 and 32 bit) and the live cd cannot boot properly. I don't get a visible error on ubuntu, it simply hang up during the boot. With fedora I get this erro: [drm] Modeset on unsupported output type [drm] Table 0x0000 not found for 1/1 using first I tried to disconnect one of the two monitor and was able to install on my HD and boot from there, but if I try to connect the second monitor again I cannot boot. Have I to install something else? (a driver for my video card for example).

  Read the article

• snow leopard: how can i monitor loading of specific extensions?

  - by ufk

  Hiya. I'm installing VoodooHDA extension in order for Intel 82801I (ICH9 Family) HD Audio 8086:293E sound card to operate. The sound card does not work but i have no idea how to debug the issue. How can I check if the module was loaded properly? how can i make sure that there where no conflicts? how can i make sure that there were no dependencies issues with another module? Using snow leopard 64 bit. thanks!

  Read the article

• Windows Home Server backup recovery missing driver for USB Device

  - by Pat James

  I'm doing a backup recovery of a Windows 7 PC from the backup on Windows Home Server. I've done this before and am accustomed to the prompt to load drivers for devices such as the NIC from a USB flash drive, which I have all loaded up with the drivers from the special folder in the WHS backup repository for this PC. My problem on this PC is that one of the drivers the recovery CD complains is missing is "USB Device", and it fails to find the drivers when I click the button to scan for and install drivers. So it seems it can't access the USB flash drive to load the other drivers. Any suggestions? I think my next step is to pull a DVD drive from another system and plug it in with a CD burned with the device drivers.

  Read the article

• What contributes to smooth online video streaming?

  - by Wesley

  I had a general question about streaming videos online; in particular, on YouTube. What really is required to smoothly stream videos at 360p or 480p? Then for that HD goodness, what really allows a computer to smoothly stream 720p and 1080p? I'm not too sure whether it's to do with the CPU (speed, # cores, cache size), GPU (chipset, VRAM, memory type) or even HDD (IDE vs SATA). What contributes to the ability to stream regular videos and, furthermore, high-definition videos online?

  Read the article

• XEN disk mapping problem under opensolaris

  - by Louis

  I have a system with two harddisks, i wanted to use the simplicity of ZFS for my file server and i also need to run a linux. I choosed XEN virtualization for that, supported on both system. My GRUB is well configured and i can boot both system. I would like is to run both system with solaris as a dom0 and the debian installed on the 2nd HD as a virtual machine. My problem is that i want to use the partitions of my 1st harddisk (sda1 under linux) and it does not work. I didn't find my use case on the web- Here is my Opensolaris device name of this partition : /dev/rdsk/c7d0p1 But when i use : disk = [ 'phy:rdsk/c7d0p1,sda1,w' ] as a disk mapping in my XEN configuration file i have the error : Error: Device 2049 (vbd) could not be connected. error: "rdsk/c7d0p1" is not a valid block device. I am "lost".

  Read the article

• Explorer.exe keeps crashing if effects are enabled

  - by Allende

  The explorer.exe keeps crashing before every minute after starts when all the effects are activated. These are the details of the error: Problem signature: Problem Event Name: InPageError Error Status Code: c0000185 Faulting Media Type: 00000003 OS Version: 6.1.7600.2.0.0.256.48 Locale ID: 1033 Additional Information 1: a7aa Additional Information 2: a7aa91f17ea749d42a4de3b390fa5b3d Additional Information 3: a7aa Additional Information 4: a7aa91f17ea749d42a4de3b390fa5b3d Read our privacy statement online: http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409 If the online privacy statement is not available, please read our privacy statement offline: C:\Windows\system32\en-US\erofflps.txt I suspect there's a problem with my hard drive ('cause I already have to format/install twice before this error) but not pretty sure why if I disable all the effect (Performance options) help to stop the issue. Anyway if someone have any idea, thanks. I already replace shell32.dll and explorer.exe using the windows 7 dvd Laptop Model: ProBook 4520s Windows Version: Profesional 32 bits. My regards

  Read the article

• What files should be excluded from a complete Windows backup?

  - by tro

  I'm starting to use CrashPlan to backup my Win 7 PC. I've got it writing to my external HD (for quick local restores) and to CrashPlan Central (for offsite storage). I'd like to backup my entire C:\ drive (the only partition) in a way that: Preserves all of my installed software and configuration, but Avoids backing up log files and other ephemeral / temporary files that are regenerated during normal operation of the OS. Which files and/or directories should I be excluding from backups? I'd like to make this a community wiki, so that we could all contribute towards a definitive list. Here's a list of regular expressions identifying the directories and files that CrashPlan excludes on Windows by default listed at http://support.crashplan.com/doku.php/articles/admin_excludes: .*/(?:42|\d{8,})/(?:cp|~).* (?i).*/CrashPlan.*/(?:cache|log|conf|manifest|upgrade)/.* .*\.part .*/iPhoto Library/iPod Photo Cache/.* .*\.cprestoretmp.* *\.rbf :/Config\\.Msi.* .*/Google/Chrome/.*cache.* .*/Mozilla/Firefox/.*cache.* .*\$RECYCLE\.BIN/.* .*/System Volume Information/.* .*/RECYCLER/.* .*/I386.* .*/pagefile.sys .*/MSOCache.* .*UsrClass\.dat\.LOG .*UsrClass\.dat .*/Temporary Internet Files/.* (?i).*/ntuser.dat.* .*/Local Settings/Temp.* .*/AppData/Local/Temp.* .*/AppData/Temp.* .*/Windows/Temp.* (?i).*/Microsoft.*/Windows/.*\.log .*/Microsoft.*/Windows/Cookies.* .*/Microsoft.*/RecoveryStore.* (?i).:/Config\\.Msi.* (?i).*\\.rbf .*/Windows/Installer.* Other excludes: .*\.(class|obj) .*/hiberfil.sys (?i).*\.tmp (?i).*/temp/ (?i).*/tmp/ .*Thumbs\.db .*/Local Settings/History/ .*/NetHood/ .*/PrintHood/ .*/Cookies/ .*/Recent/ .*/SendTo/

  Read the article

• IBM BladeServer Chassis compatibility

  - by Matt

  Hi, I'm looking at buying a 3 year old blade server. My question is, if I buy it and want to insert a current model blade, will it fit? Also, if the chassis goes "POP" and I need to replace it, will the current model chassis fit 3 year old blades? What about Power supply replacements? The chassis I'm looking at is this: IBM FRU / PN: M8677-3XM with DVD reader The blades are all IBM HS20's. We've had a good run with IBM hardware and although there is some nice ex-lease HP hardware available, my understanding is that backwards comparability is not so well maintained. Is this true?

  Read the article

• OpenGL support no longer available

  - by Aznfin

  I've been using OpenGL hardware acceleration in programs such as Adobe Photoshop CS4 and Adobe After Effects CS4. I've noticed that recently the options for OpenGL previews are disabled because my graphics card seems to not support OpenGL. But that doesn't make any sense whatsoever. I know for a fact that my graphics card does have support for OpenGL and it worked before. I checked for driver updates just the other day. Anybody know what's going on? Info: Operating System: Windows 7 Home Premium 64-bit GPU: ATI Radeon HD 3200 Driver Packaging Version: 8.69-091211a-094296C-ATI Catalyst™ Version: 09.12 Provider: ATI Technologies Inc. 2D Driver Version: 8.01.01.994 2D Driver File Path: /REGISTRY/MACHINE/SYSTEM/ControlSet001/Control/CLASS /{4D36E968-E325-11CE-BFC1-08002BE10318}/0000 Direct3D Version: 8.14.10.0723 OpenGL Version: 6.14.10.9252 Catalyst™ Control Center Version: 2009.1211.1547.28237

  Read the article

• Intel motherboard drops HDMI output after Windows boots

  - by Nick

  I have an Intel motherboard (DH67CL) that uses Intel HD 3000 video. It has two video output ports: HDMI and DVI. Both my monitors are DVI, so I have two cables: a DVI-DVI and an HDMI-DVI. If I plug a monitor into just one of these ports, things work fine. But if I plug monitors into each of the ports, the system startup screens show on both monitors, along with the "Starting Windows..." screen, but as soon as the system boots into Windows, the HDMI-connected monitor goes to sleep. When I use the Intel video control panel, the HDMI-connected monitor is not detected. How do I get a dual-monitor setup to work?

  Read the article

• Computer Components

  - by Martin

  What is the role of a motherboard in terms of how components communicate with the processor (via the system busses). Therefore, for each component, which communication bus is involved and what is the route that data takes from the component to the processor, including; The bus name Whether bus is serial or parallel The name of any bridges involved Also, what is the the role of a bridge The components are: Internal components: Floppy Drive, Hard Drive, CD/DVD Drive, Memory, Processor Power supply, Graphics card & Sound card External devices: Monitor, Keyboard, Mouse (PS2 & USB), Printer, Pen Drive I have absolutely no idea of what the routes are and how motherboards communicate, could someone give me a start here? Thanks.

  Read the article

• Diagnose Slow Video Playback during Editing [closed]

  - by chadejah Hunter

  Possible Duplicate: I Want To Start Editing Videos But My Computer Moves Slowly I am using Windows 7 Home Premium on a PC with AMD 64bit Athlon Processor 2850e @ 1.80GHz, 2GB RAM, and a NVIDIA GeForce 6150SE nForce 430 graphics card I am using Pinnacle Studio 15 HD Ultimate. While editing videos the program moves normally but the playback is slow. When I press play the sound is normal but the picture is really slow and choppy. When the sound ends the picture continues to play and it speeds up. I updated the video card today, restarting the PC but get the same behaviour. Does anyone have any suggestions what I can do to get video working smoothly while editing?

  Read the article

• Third monitor randomly defaults to 640 x 480 on startup

  - by andybaird

  I purchased a PowerColor HD 5770 video card so I could get a third monitor working. I have two widescreen monitors, one attached via HDMI and the other attached via DVI. My third monitor is attached from DisplayPort to VGA (using a passive connector like this one) The third monitor is a 19" Hyundai L90D. I was unable to find any Windows 7 (or Vista for that matter) drivers for the monitor, so it's stuck with "Generic Non-PNP Monitor". It's native resolution is 1280 x 1024. Randomly Windows will boot up in the correct native res, but sometimes it boots up in 640 x 480 res. When it does boot up into 640 x 480 res, the screen resolution slider is stuck and I cannot slide it back to 1280 x 1024. I cannot find a pattern for when or why it will do this, I've tried rebooting five or six times in a row at times to get it to boot into native res, but this doesn't always work.

  Read the article

• RAID0 PROBLEM WITH A SONY SPORTING A NEW HDD

  - by redrock

  Sony Windows 7 PC. Originally had 2 x 300Gb HDD. One HDD completely pancaked so have replaced with a new 500Gb HDD. When both drives are connected the 300GB doesn't appear to be recognised as a 300Gb HDD as a seperate entity. BIOS sees it but the operating system only sees a total of 465GB of HD space. When both disks are attached unde disk management it shows one 465Gb as RAID 0 and the new drive as STxxxxxx 465Gb. My question I guess is what should I see in total HDD space and is this configured correctly as I thought I would see 2 seperate drives 1x500Gb and 1x300Gb. My customer insisted that prior to the HDD crash he saw 2 drives both registering as 300Gb (a c: and d: drive).

  Read the article

• unable to access shared drives n win7

  - by colin

  OK, this is doing my head in. Not your usual Win7 sharing problem. Just built a win 7 comp to go onto my home lan and be accessed by all on the network, mostly running XP SP3. Installed it as a single HD+DVD system, got it happy, then added my storage drives, set them up in the right order and letters, rebooted, and shared them. Couldn't access the computer at all from any XP machine. Set the pasword thingy in win7 to NO, and now I can "see" all four shared drives from any machine, but can access only two of them. Please tell me whats going on as I've done nothing different from one drive to the other, just installed and set up drive letters as normal, then shared the damn things. The odd thing about it? the two 1.5T drives that have a lot of data on board are accessable, the two nearly empty 500G ones are not. ANY ideas? Cheers, Colin

  Read the article

• Audigy 2 Coaxial to Coaxial/Optical connection possible?

  - by Chris

  Hello, The original question is deleted, and asked again below with accurate information. Edit: Excuse me for my ignorance, my friend has a Logitech Z-5500 set. I thought after comparing those systems on Google images that he had the Z-680, but he hasn't. This set has a single Digital coaxial for DVD or CD players or PC sound cards (requires coaxial cable, sold separately) cable. This single cable was connected to the orange tulip connector (SPDIF coaxial out) on the backside of his onboard HP Elite m9070, this connector is broken. How can I use the digital out with a single cable coaxial cable on the Audigy2 (see image below) (I have the following converters for my disposal, can I use one of these? 3.5 mm male - coax optical mini optical male - toslink optical female 2 x toslink optical female, toslink coupler, optical audio extension note: Is it possible to connect a toslink cable with an mini optical male - toslink converter on the digital out of the Audigy 2? (see image below)

  Read the article

• How to boot from a flash drive OS using VirtualBox?

  - by kokbira

  I have two flash drive, one with Slax installed and another for Android x86 Live installed, but they do not boot in my laptop (in my work they boot perfectly). I can boot from some live CDs/DVDs or its ISO files using VirtualBox, but I cannot do it for live flash drives - I put the flash drives and start a VirtualBox without any virtual HD, but VirtualBox does not recognize them as boot options, as it does for CDs/DVDs. Any ideas? Any alternatives if VirtualBox does not support it? Edit1: I'm using Windows (Windows 7) but I would like to know how to do it in Linux (Ubuntu, for example) too.

  Read the article

• 64bit on core i5 with 2GB DDR3 RAM?

  - by Jacques

  Core i5 2.3 Ghz processor 512mb ATI HD 4570 2GB 1333 RAM 64bit Windows 7 Home Premium. Should I "down-grade" to 32bit? Does running 64bit with only 2GB RAM make the laptop weaker than running 32bit with 2GB RAM or is the performance pretty much the same? Is there any performance benefit to running 64bit with only 2GB RAM? Is there an impact on battery life between 64bit and 32bit. Should I maybe just add another 2GB RAM? Thanks.

  Read the article

• Is TrueCrypt robust against data corruption?

  - by Dimitri C.

  I would expect a TrueCrypt volume to be fragile when it suffers from data corruption. This could happen for example because the hard disk, CD or DVD start to deteriorate, or when an USB stick is unplugged while a write is in progress. On the TrueCrypt FAQ it is mentioned that this problem is limited because the data is encrypted in blocks of 16 bytes. However, I'dd like to know if this really so in practice. Is there anyone who has experienced severe data loss due to only small corruptions?

  Read the article

• "EISA Configuration" partition

  - by jpbochi

  I have a new Alienware M17x running Vista x64. I just found out that it came with a misterious "EISA Configuration" partition. On Disk Management, my Disk 0 tells me that my HD has about 300 GB. The EISA partition has 12 GB. That's big enough to know why is it there. So, this is more of a bundle question. What is this "EISA Configuration" partition? Is it safe to remove it somehow? If so, how can I delete it? I mean join it with the primary partition, or set it as a secondary small partition.

  Read the article

• Ubuntu Karmic, Maximize delay problem

  - by Loukas990

  Hello, I have tried various ubuntu versions, Ubuntu Karmic Koala 9.10 x86, Ubuntu 10.04 beta DVD, Ubuntu 9.10 AMD64, Mandriva 2010 x86, also a Fedora version and after installing compiz on all OS's, everything is working normal and smooth, even the compiz effects, cube, water, fire, wobbling windows, etc, except of the Maximize effect, where i get 2seconds+ delay for the effect. Cause it got me in a lot of thinking, why im getting this delay "problem", do you think there is any solution? or at least a way to decrease the delay? Thanks in advance. ;) P.S. My laptop is a Toshiba Satellite P300d, AMD Turion 64 x2 Dual-Core TL-64 (2.20 GHz), ATI Mobility Radeon™ HD 3650 512MB, 3GB RAM.

  Read the article

< Previous Page | 101 102 103 104 105 106 107 108 109 110 111 112  | Next Page >