Search Results

Search found 15578 results on 624 pages for 'place and route'.

Page 102/624 | < Previous Page | 98 99 100 101 102 103 104 105 106 107 108 109  | Next Page >

  • Server 2008, 2 NICs, 2 fixed IPs - big delays using internet

    - by user46055
    Hi geniuses I have an all in one Windows 2008 server, configured with AD/DHCP/DNS/RRAS - all set up with wizards and no specific tweaking. The server has 2 network adapters : one of which ("MyWAN") is plugged into our office's internet connection, the other ("MyLAN") is plugged into a local switch, which is also where all our desktops are connected. So this one server is doing everything. When first set up, MyLAN had a fixed IP of 192.168.2.1 and served the desktops with DHCP scope 192.168.2.50-99. It also told them to use 192.168.2.1 as DNS and gateway. MyWAN was setup to take its IP etc from DHCP, being handled by the building's router and ADSL modem etc. All desktops were setup to use DHCP. This all worked perfectly fine, until I recently changed MyWAN to have a static IP (I wanted to access it from home, and needed to give it a static IP to port map in the building's router). Things still work, but there is now a long delay when accessing the internet. The actual speed is as before when downloading, but there is a pause of 3-6 secs when connecting to new hosts (for example if I browse to slashdot from either a desktop or the server itself, it'll hang on connecting to slashdot.org, hang again on connecting to *.fsdn, *.google-analytics.com and all the other hosts referenced from the main page). If I ping slashdot.org from the server, I get the following : Pinging slashdot.org [216.34.181.45] with 32 bytes of data: Reply from 192.168.2.1: Destination host unreachable. Reply from 216.34.181.45: bytes=32 time=99ms TTL=239 Reply from 216.34.181.45: bytes=32 time=100ms TTL=239 Reply from 216.34.181.45: bytes=32 time=101ms TTL=239 Pinging anywhere external always seems to hit 192.168.2.1 first, which doesn't seem right. Trying tracert from the server gives the following : Tracing route to slashdot.org [216.34.181.45] over a maximum of 30 hops: 1 MYSERVER01.intranet [192.168.2.1] reports: Destination host unreachable Trying tracert from a desktop gives the following : Tracing route to slashdot.org [216.34.181.45] over a maximum of 30 hops: 1 <1 ms * <1 ms MYSERVER [192.168.2.1] 2 * * * Request timed out. 3 6 ms 6 ms 6 ms dsl-gw1.ge.mer.uk.webtapestry.net [217.151.111.17] 4 38 ms 239 ms 251 ms gw-router.ge.mer.uk.webtapestry.net [217.151.111.13] ...and then all is fine after that. I think that DNS is working fine because the domain names are getting translated to correct IPs immediately. DHCP seems to be okay? So perhaps it's something up with my RRAS setup - although I can't see any option during the setup wizard which I would have filled in differently. I've also tried changing the binding order of the two network connections, to prioritise MyWAN, but that doesn't seem to have done anything. Any idea what's up? Many thanks - Rob

    Read the article

  • Set up tunnel to HE.net and now only ipv6.google.com works, but other sites ping fine.

    - by AndrejaKo
    I'm setting up IPv6 using my router which is running OpenWRT, version Backfire 10.03.1-rc4. I made a tunnel using Hurricane Electric's tunnel broker and set it up on the router and I'm using RADVD to hand out IPv6 addresses. My problem is that on computers on the network, I can only access ipv6.google.com using a browser, but other sites seem to be loading forever and won't open in any browser. I can ping and traceroute to them fine, but can't open them with a browser. I can open any site normally with a browser from the router. Stopping firewall service on the router doesn't help, so it's probably not a firewall issue. All AAAA records resolve fine, so it's probably not a DNS issue. Computers on the network get their IPv6 addresses fine, so it's probably not a radvd issue. Similar setup worked fine for SixXs, but I'm having problems with my PoP there, so I decided to move to HE. Here are some traceroutes: From a client computer: Tracing route to ipv6.he.net [2001:470:0:64::2] over a maximum of 30 hops: 1 <1 ms 1 ms 1 ms 2001:470:1f0b:de5::1 2 62 ms 63 ms 62 ms andrejako-1.tunnel.tserv6.fra1.ipv6.he.net [2001:470:1f0a:de5::1] 3 60 ms 60 ms 63 ms gige-g2-4.core1.fra1.he.net [2001:470:0:69::1] 4 63 ms 68 ms 68 ms 10gigabitethernet1-4.core1.ams1.he.net [2001:470:0:47::1] 5 84 ms 74 ms 76 ms 10gigabitethernet1-4.core1.lon1.he.net [2001:470:0:3f::1] 6 146 ms 147 ms 151 ms 10gigabitethernet4-4.core1.nyc4.he.net [2001:470:0:128::1] 7 200 ms 198 ms 202 ms 10gigabitethernet5-3.core1.lax1.he.net [2001:470:0:10e::1] 8 219 ms * 210 ms 10gigabitethernet2-2.core1.fmt2.he.net [2001:470:0:18d::1] 9 221 ms 338 ms 209 ms gige-g4-18.core1.fmt1.he.net [2001:470:0:2d::1] 10 206 ms 210 ms 207 ms ipv6.he.net [2001:470:0:64::2] Trace complete. and another from a cliet computer Tracing route to whatismyipv6.com [2001:4870:a24f:2::90] over a maximum of 30 hops: 1 7 ms 1 ms 1 ms 2001:470:1f0b:de5::1 2 69 ms 70 ms 63 ms AndrejaKo-1.tunnel.tserv6.fra1.ipv6.he.net [2001:470:1f0a:de5::1] 3 57 ms 65 ms 58 ms gige-g2-4.core1.fra1.he.net [2001:470:0:69::1] 4 73 ms 74 ms 75 ms 10gigabitethernet1-4.core1.ams1.he.net [2001:470:0:47::1] 5 71 ms 74 ms 76 ms 10gigabitethernet1-4.core1.lon1.he.net [2001:470:0:3f::1] 6 141 ms 149 ms 148 ms 10gigabitethernet2-3.core1.nyc4.he.net [2001:470:0:3e::1] 7 141 ms 147 ms 143 ms 10gigabitethernet1-2.core1.nyc1.he.net [2001:470:0:37::2] 8 144 ms 145 ms 142 ms 2001:504:1::a500:4323:1 9 226 ms 225 ms 218 ms 2001:4870:a240::2 10 220 ms 224 ms 219 ms 2001:4870:a240::2 11 219 ms 218 ms 220 ms 2001:4870:a24f::2 12 221 ms 222 ms 220 ms www.whatismyipv6.com [2001:4870:a24f:2::90] Trace complete. Here's some firewall info on the router: root@OpenWrt:/# iptables -L -n Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 syn_flood tcp -- 0.0.0.0/0 0.0.0.0/0 tcp flags:0x17/0x02 input_rule all -- 0.0.0.0/0 0.0.0.0/0 input all -- 0.0.0.0/0 0.0.0.0/0 Chain FORWARD (policy DROP) target prot opt source destination zone_wan_MSSFIX all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED forwarding_rule all -- 0.0.0.0/0 0.0.0.0/0 forward all -- 0.0.0.0/0 0.0.0.0/0 reject all -- 0.0.0.0/0 0.0.0.0/0 Chain OUTPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 output_rule all -- 0.0.0.0/0 0.0.0.0/0 output all -- 0.0.0.0/0 0.0.0.0/0 Chain forward (1 references) target prot opt source destination zone_lan_forward all -- 0.0.0.0/0 0.0.0.0/0 zone_wan_forward all -- 0.0.0.0/0 0.0.0.0/0 zone_wan_forward all -- 0.0.0.0/0 0.0.0.0/0 Chain forwarding_lan (1 references) target prot opt source destination Chain forwarding_rule (1 references) target prot opt source destination nat_reflection_fwd all -- 0.0.0.0/0 0.0.0.0/0 Chain forwarding_wan (1 references) target prot opt source destination Chain input (1 references) target prot opt source destination zone_lan all -- 0.0.0.0/0 0.0.0.0/0 zone_wan all -- 0.0.0.0/0 0.0.0.0/0 zone_wan all -- 0.0.0.0/0 0.0.0.0/0 Chain input_lan (1 references) target prot opt source destination Chain input_rule (1 references) target prot opt source destination Chain input_wan (1 references) target prot opt source destination Chain nat_reflection_fwd (1 references) target prot opt source destination ACCEPT tcp -- 192.168.1.0/24 192.168.1.2 tcp dpt:80 Chain output (1 references) target prot opt source destination zone_lan_ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 zone_wan_ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 Chain output_rule (1 references) target prot opt source destination Chain reject (7 references) target prot opt source destination REJECT tcp -- 0.0.0.0/0 0.0.0.0/0 reject-with tcp-reset REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable Chain syn_flood (1 references) target prot opt source destination RETURN tcp -- 0.0.0.0/0 0.0.0.0/0 tcp flags:0x17/0x02 limit: avg 25/sec burst 50 DROP all -- 0.0.0.0/0 0.0.0.0/0 Chain zone_lan (1 references) target prot opt source destination input_lan all -- 0.0.0.0/0 0.0.0.0/0 zone_lan_ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 Chain zone_lan_ACCEPT (2 references) target prot opt source destination ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 Chain zone_lan_DROP (0 references) target prot opt source destination DROP all -- 0.0.0.0/0 0.0.0.0/0 DROP all -- 0.0.0.0/0 0.0.0.0/0 Chain zone_lan_MSSFIX (0 references) target prot opt source destination TCPMSS tcp -- 0.0.0.0/0 0.0.0.0/0 tcp flags:0x06/0x02 TCPMSS clamp to PMTU Chain zone_lan_REJECT (1 references) target prot opt source destination reject all -- 0.0.0.0/0 0.0.0.0/0 reject all -- 0.0.0.0/0 0.0.0.0/0 Chain zone_lan_forward (1 references) target prot opt source destination zone_wan_ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 forwarding_lan all -- 0.0.0.0/0 0.0.0.0/0 zone_lan_REJECT all -- 0.0.0.0/0 0.0.0.0/0 Chain zone_wan (2 references) target prot opt source destination ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:68 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 8 ACCEPT 41 -- 0.0.0.0/0 0.0.0.0/0 input_wan all -- 0.0.0.0/0 0.0.0.0/0 zone_wan_REJECT all -- 0.0.0.0/0 0.0.0.0/0 Chain zone_wan_ACCEPT (2 references) target prot opt source destination ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 Chain zone_wan_DROP (0 references) target prot opt source destination DROP all -- 0.0.0.0/0 0.0.0.0/0 DROP all -- 0.0.0.0/0 0.0.0.0/0 DROP all -- 0.0.0.0/0 0.0.0.0/0 DROP all -- 0.0.0.0/0 0.0.0.0/0 Chain zone_wan_MSSFIX (1 references) target prot opt source destination TCPMSS tcp -- 0.0.0.0/0 0.0.0.0/0 tcp flags:0x06/0x02 TCPMSS clamp to PMTU TCPMSS tcp -- 0.0.0.0/0 0.0.0.0/0 tcp flags:0x06/0x02 TCPMSS clamp to PMTU Chain zone_wan_REJECT (2 references) target prot opt source destination reject all -- 0.0.0.0/0 0.0.0.0/0 reject all -- 0.0.0.0/0 0.0.0.0/0 reject all -- 0.0.0.0/0 0.0.0.0/0 reject all -- 0.0.0.0/0 0.0.0.0/0 Chain zone_wan_forward (2 references) target prot opt source destination ACCEPT tcp -- 0.0.0.0/0 192.168.1.2 forwarding_wan all -- 0.0.0.0/0 0.0.0.0/0 zone_wan_REJECT all -- 0.0.0.0/0 0.0.0.0/0 Here's some routing info: root@OpenWrt:/# ip -f inet6 route 2001:470:1f0a:de5::/64 via :: dev 6in4-henet proto kernel metric 256 mtu 1280 advmss 1220 hoplimit 0 2001:470:1f0b:de5::/64 dev br-lan proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 0 fe80::/64 dev eth0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 0 fe80::/64 dev br-lan proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 0 fe80::/64 dev eth0.1 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 0 fe80::/64 dev eth0.2 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 0 fe80::/64 via :: dev 6in4-henet proto kernel metric 256 mtu 1280 advmss 1220 hoplimit 0 default dev 6in4-henet metric 1024 mtu 1280 advmss 1220 hoplimit 0 I have computers running windows 7 SP1 and openSUSE 11.3 and all of them have same problem. I also made a thread about this on HE's forum, but it seems that people there are out of ideas what to do.

    Read the article

  • Do Websites need Local Databases Anymore?

    - by viatropos
    If there's a better place to ask this, please let me know. Every time I build a new website/blog/shopping-cart/etc., I keep trying to do the following: Extract out common functionality into reusable code (Rubygems and jQuery plugins mostly) If possible, convert that gem into a small service so I never have to deal with a database for the objects involved (by service, I mean something lean and mean, usually built with the Sinatra Web Framework with a few core models). My assumption is, if I can remove dependencies on local databases, that will make it easier and more scalable in the long run (scalable in terms of reusability and manageability, not necessarily database/performance). I'm not sure if that's a good or bad assumption yet. What do you think? I've made this assumption because of the following reason: Most serious database/model functionality has been built on the internet somewhere. Just to name a few: Social Network API: Facebook Messaging API: Twitter Mailing API: Google Event API: Eventbrite Shopping API: Shopify Comment API: Disqus Form API: Wufoo Image API: Picasa Video API: Youtube ... Each of those things are fairly complicated to build from scratch and to make as optimized, simple, and easy to use as those companies have made them. So if I build an app that shows pictures (picasa) on an Event page (eventbrite), and you can see who joined the event (facebook events), and send them emails (google apps api), and have them fill out monthly surveys (wufoo), and watch a video when they're done (youtube), all integrated into a custom, easy to use website, and I can do that without ever creating a local database, is that a good thing? I ask because there's two things missing from the puzzle that keep forcing me to create that local database: Post API RESTful/Pretty Url API While there's plenty of Blogging systems and APIs for them, there is no one place where you can just write content and have it part of some massive thing. For every app, I have to use code for creating pretty/restful urls, and that saves posts. But it seems like that should be a service! Question is, is that what the website is? ...That place to integrate the worlds services for my specific cause... and, sigh, to store posts that only my site has access to. Will everyone always need "their own blog"? Why not just have a profile and write lots of content on an established platform like StackOverflow or Facebook? ... That way I can write apps entirely without a database and know that I'm doing it right. Note: Of course at some point you'd need a database, if you were doing something unique or new. But for the case where you're just rewiring information or creating things like videos, events, and products, is it really necessary anymore??

    Read the article

  • Git: Help an SVN novice translate trunk/branch concepts to Git

    - by Jasconius
    So I am not much of a source control expert, I've used SVN for projects in the past. I have to use Git for a particular project (client supplied Git repo). My workflow is as such that I will be working on the files from two different computers, and often I need to check in changes that are unstable when I move from place to place so I can continue my work. What then occurs is when, say, the client goes to get the latest version, they will also download the unstable code. In SVN, you can address this by creating a trunk and use working branches, or use the trunk as the working version and create stable branches. What is the equivalent concept in Git, and is there a simple way to do this via Github?

    Read the article

  • Documenting (XML) Application Settings in Visual Studio 2010

    - by SirLenz0rlot
    Hi all, I recently created a (C#) project with Visual Studio (2010) and used some Settings (which I created under Properties). The only place I found where I can add some XML comments for my documentation, would be in Settings.Designer.cs. However this file is auto-generated so whenever I change the Settings, the comments are gone. Even Visual Studio gives started giving mewarnings, "Missing XML comment for publicity visibly type or member .... " My question here is: What is the neatest way to add XML comments to my Settings? Is there a better place than Settings.Designer.cs? Should I stop the file from being auto-generated? How? Any other way?

    Read the article

  • Routing RFC1918 addresses through dd-wrt via a switch

    - by espenfjo
    I am a bit stuck with an experiment of mine. I have a network looking somewhat like this. | Internet | | ---- |Switch| ---- | | Server w/pub IP | DD-WRT router 192.168.1.1 | | RFC1918 clients 192.168.1.0/24 What I want is for the RFC1918 clients to speak directly with each others. On the server with the public IP I have this route: 192.168.1.0/24 dev eth0 scope link and can see that packets are infact reaching the dd-wrt router for 192.168.1.1, even though if I get no answer. Trying to reach one of the RFC1918 clients from the public IP server will get no result, as the dd-wrt router is not announcing that network on to its external interface (arp who-has 192.168.1.107 tell xxx.xxx.xxx.xxx, but no answer). The router being an WLAN dd-wrt router has of course a load of routes, VLANs and interfaces: xxx.xxx.xxx.1 dev vlan2 scope link 192.168.1.0/24 dev br0 proto kernel scope link src 192.168.1.1 192.168.1.0/24 dev eth1 proto kernel scope link src 192.168.1.244 84.215.64.0/18 dev vlan2 proto kernel scope link src xxx.xxx.xxx.xxx 169.254.0.0/16 dev br0 proto kernel scope link src 169.254.255.1 127.0.0.0/8 dev lo scope link 0.0.0.0 via xxx.xxx.xxx.1 dev vlan2 xxx.xxx.xxx.xxx being the public IP, and xxx.xxx.xxx.1 being the default route for the public IP. I am not sure where to continue with this. I would recon that I both need routing on the dd-wrt router, as well as some iptables magic? Why do something this complex? Why not ;) Also, do not mind that "Internet" can get RFC1918 traffic, it wont go outside of the walls. EDIT 1: Following the tip from stew I do indeed get the correct ARP flowing. And adding an iptables rule for allowing traffic from that specific public IPd machine I get traffic between the systems! Oddly enough though, the speed I get from Server w/pub IP - RFC1918 clients are the same as if the traffic were routed out onto the Internet and back. Edit 2: Ok, disconnecting the external Internet connection will still give the same, crappy transfer speed. So it has to be something else. Edit 3: Ok, I guess there are other reasons for this crappy speed. Case closed. :)

    Read the article

  • Geocoding non-addresses: Geopy

    - by Phil Donovan
    Using geopy to geocode alcohol outlets in NZ. The problem I have is that some places do not have street addresses but are places in Google Maps. For example, plugging: Furneaux Lodge, Endeavour Inlet, Queen Charlotte Sound, Marlborough 7250 into Google Maps via the browser GUI gives me However, using that in Geopy I get a GQueryError saying this geographic location does not exist. Here is the code for geocoding: def GeoCode(address): g=geocoders.Google(domain="maps.google.co.nz") geoloc = g.geocode(address, exactly_one=False) place, (lat, lng) = geoloc[0] GeoOut = [] GeoOut.extend([place, lat, lng]) return GeoOut GeoCode("Furneaux Lodge, Endeavour Inlet, Queen Charlotte Sound, Marlboroguh 7250") Meanwhile, I notice that "Eiffel Tower" works fine. Is there away to solve this and can someone explain the difference between The Eiffel Tower and Furneaux Lodge within Google 'locations'?

    Read the article

  • Visual Editor vs Manual code

    - by Albinoswordfish
    I'm not sure how it is using other frameworks but this questions is strictly regarding Java swing. Is it better to use a Visual Editor to place objects or to manually code the placement of the objects onto the frame (Layout managers or null layouts)? From my experience I've had a lot of trouble using Visual editors when it comes to different screen resolutions or changing the window size. Using manual code to place objects I've found that my GUIs behave a lot better with regard to the screen size issue. However when I want to change a small part of my GUI it takes a lot more work compared to using a visual editor Just wondering what people's thoughts were on this?

    Read the article

  • LinqToXML why does my object go out of scope? Also should I be doing a group by?

    - by Kettenbach
    Hello All, I have an IEnumerable<someClass>. I need to transform it into XML. There is a property called 'ZoneId'. I need to write some XML based on this property, then I need some decendent elements that provide data relevant to the ZoneId. I know I need some type of grouping. Here's what I have attempted thus far without much success. **inventory is an IEnumerable<someClass>. So I query inventory for unique zones. This works ok. var zones = inventory.Select(c => new { ZoneID = c.ZoneId , ZoneName = c.ZoneName , Direction = c.Direction }).Distinct(); No I want to create xml based on zones and place. ***place is a property of 'someClass'. var xml = new XElement("MSG_StationInventoryList" , new XElement("StationInventory" , zones.Select(station => new XElement("station-id", station.ZoneID) , new XElement("station-name", station.ZoneName)))); This does not compile as "station" is out of scope when I try to add the "station-name" element. However is I remove the paren after 'ZoneId', station is in scope and I retreive the station-name. Only problem is the element is then a decendant of 'station-id'. This is not the desired output. They should be siblings. What am I doing wrong? Lastly after the "station-name" element, I will need another complex type which is a collection. Call it "places'. It will have child elements called "place". its data will come from the IEnumerable and I will only want "places" that have the "ZoneId" for the current zone. Can anyone point me in the right direction? Is it a mistake select distinct zones from the original IEnumerable? This object has all the data I need within it. I just need to make it heirarchical. Thanks for any pointers all. Cheers, Chris in San Diego

    Read the article

  • Curious about python installation paths, especially on OSX.

    - by chiggsy
    First: I'm running Macports. No problems with that, except: /opt/local/Library/Frameworks/Python.framework/Versions/2.6/bin which is the value of sys.exec_prefix, for my macports python even though: /opt/local/lib/python2.6/site-packages/ seems to be quite a logical place to put things, /opt/local being the macports --prefix, as it were. Why does easy_install put things in this odd Frameworks/Python.framework thing? More importantly, can i use the methods here, to ensure that all my systemwide python, particularly the scripts which I really want in /opt/local/bin, things I use all over the place like (i|b)python for example are accessible?

    Read the article

  • Python PyQT4 - Adding an unknown number of QComboBox widgets to QGridLayout

    - by ZZ
    Hi all, I want to retrieve a list of people's names from a queue and, for each person, place a checkbox with their name to a QGridLayout using the addWidget() function. I can successfully place the items in a QListView, but they just write over the top of each other rather than creating a new row. Does anyone have any thoughts on how I could fix this? self.chk_People = QtGui.QListView() items = self.jobQueue.getPeopleOffQueue() for item in items: QtGui.QCheckBox('%s' % item, self.chk_People) self.jobQueue.getPeopleOffQueue() would return something like ['Bob', 'Sally', 'Jimmy'] if that helps.

    Read the article

  • maths: motion depending on time

    - by clamp
    hello, i have a mathematical problem: i have a function where the only parameter is the current time. the return should be a position which is used to place an object on a certain place. int position(int time) { int x = 0; //TODO implement x depending on time return x; } so basically the function is called every frame to put the object in motion. the motion should look like this (this is the actual question): a linear motion for time A, the object moves at constant speed no motion for time B, the object is stopped repeat at 1. thanks!

    Read the article

  • Building an SSL server farm

    - by dan
    I'm interested in building the the architecture in the article referenced below. I currently have a modestly-priced layer-4 load balancer and my application servers are the SSL endpoints. I want to put an SSL server farm in between my load balancer and my app servers. Then I will put another inexpensive load balancer between the SSL farm and my app servers, to do layer-7 routing. My web application has a fairly high amount of consumer traffic, that 6 servers can handle at about 50% capacity. Additionally, I have infrastructure traffic that is several orders of magnitude heavier than my consumer traffic. This is data coming in from all over the world that must integrate with my web application in real time. In total I have 18 app servers to handle all the traffic, plus 6 database servers. I will be adding 6 more app servers over the next 2 weeks and another 6 the 2 weeks after that. Conservatively, I estimate I will need to scale to 120 servers by the end of the year. My motivation right now is to separate the consumer traffic from the infrastructure traffic. The consumer traffic is higher priority than the infrastructure traffic and I cannot allow a stampede on the infrastructure side to take down my consumer-facing servers. Having a website that is always up is the top priority. However if there is a failure in one of the consumer app servers, I want to route that traffic to the servers designated for infrastructure traffic. The complication is that all the traffic is addressed using the same hostname and is nearly 100% https. The only way in my case to distinguish infrastructure from consumer traffic is by URL (poor architecture I inherited), so I need a layer 7 load balancer to be able to route. However for that to work I need either a fancy hardware-based SSL terminator or an SSL server farm as described above. Because my user base is rapidly scaling, I worry that if I go down the hardware path it will become very expensive very fast, especially since I will need 4 of everything for high availability (2 identical setups in 2 facilities). Meanwhile, the above diagram seems very flexible and more horizontally scalable. Has anyone built this before? Are there pre-built configurations? What considerations should I make and what software should I use (I've heard of people using apache with mod-ssl, nginx, and stunnel)? Also, when does it make sense to buy an expensive load balancer vs building an SSL server farm? http://1wt.eu/articles/2006_lb/index_05.html

    Read the article

  • jquery atrr("href") is not consistent ..in sharepoint

    - by alienavatar
    Hi all I have a jquery function(This is not written by me anyway still I am learning). In that we are replacing urls using f.attr("href") in several places. I am not understanding that from where this href value will be binded. And why the value(f.attr("href")) is changing place to place. I mean to say it is having some value @ one location and if I give the same it is giving me different value at other location. I read in article that The .attr() method gets the attribute value for only the first element in the matched set..What is the matched set means

    Read the article

  • How can I find a package?

    - by Roman
    In my code I have the following statement import com.apple.dnssd.*; and compiler (javac) complains about this line. It writes that the package does not exist. But I think that it could be that "javac" search the package in a wrong place (directory). In this respect I have two questions: How can I know where javac search for the packages? I think that it is very likely that I have the above mentioned package but I do not know where it is located. What are the typical place to look for the packages?

    Read the article

  • Code-Golf: Friendly Number Abbreviator

    - by David Murdoch
    Based on this question: Is there a way to round numbers into a friendly format? THE CHALLENGE - UPDATED! (removed hundreds abbreviation from spec) The shortest code by character count that will abbreviate an integer (no decimals). Code should include the full program. Relevant range is from 0 - 9,223,372,036,854,775,807 (the upper limit for signed 64 bit integer). The number of decimal places for abbreviation will be positive. You will not need to calculate the following: 920535 abbreviated -1 place (which would be something like 0.920535M). Numbers in the tens and hundreds place (0-999) should never be abbreviated (the abbreviation for the number 57 to 1+ decimal places is 5.7dk - it is unneccessary and not friendly). Remember to round half away from zero (23.5 gets rounded to 24). Banker's rounding is verboten. Here are the relevant number abbreviations: h = hundred (102) k = thousand (103) M = million (106) G = billion (109) T = trillion (1012) P = quadrillion (1015) E = quintillion (1018) SAMPLE INPUTS/OUTPUTS (inputs can be passed as separate arguments): First argument will be the integer to abbreviate. The second is the number of decimal places. 12 1 => 12 // tens and hundreds places are never rounded 1500 2 => 1.5k 1500 0 => 2k // look, ma! I round UP at .5 0 2 => 0 1234 0 => 1k 34567 2 => 34.57k 918395 1 => 918.4k 2134124 2 => 2.13M 47475782130 2 => 47.48G 9223372036854775807 3 => 9.223E // ect... . . . Original answer from related question (javascript, does not follow spec): function abbrNum(number, decPlaces) { // 2 decimal places => 100, 3 => 1000, etc decPlaces = Math.pow(10,decPlaces); // Enumerate number abbreviations var abbrev = [ "k", "m", "b", "t" ]; // Go through the array backwards, so we do the largest first for (var i=abbrev.length-1; i>=0; i--) { // Convert array index to "1000", "1000000", etc var size = Math.pow(10,(i+1)*3); // If the number is bigger or equal do the abbreviation if(size <= number) { // Here, we multiply by decPlaces, round, and then divide by decPlaces. // This gives us nice rounding to a particular decimal place. number = Math.round(number*decPlaces/size)/decPlaces; // Add the letter for the abbreviation number += abbrev[i]; // We are done... stop break; } } return number; }

    Read the article

  • Save batch file path to local harddisk

    - by Brian
    Hi, I have a batch file that is Run when a selfextraction file is executed. The self extracted files must be copied to to specefic place on the harddisc. In the batch file the user is asked where the path is (if it's not located the default place) Part of the batch file: @ECHO OFF IF EXIST "C:\Program Files\program\program.exe". ( set PROGRAMPATH=C:\Program Files\ ) ELSE ( echo Program folder was not found. Please enter the path for Program set /p PROGRAMPATH=Path: ) echo Copying data to "%PROGRAMPATH%"... copy /Y "*.txt" "%PROGRAMPATH%" Now for my question. If a user then enters a new path, is it possible to save that path. So when he executes the self extraction packagde again, it could remember that new path?

    Read the article

  • shorewall masquerading from tun0 to ppp0

    - by damir
    First interface is ppp0 (pptp vpn) Second inteface is tun0 (openvpn) Third interface eth0 (default gw interface) Openvpn is set to change default route on client for all packets to go through tun0 vpn, that part is working ok. I would like to make all packets from tun0 go to ppp0 and get out from that interface (MASQ) but somehow they always end up on eth0 (default gw interface) /etc/shorewall/masq ppp0 tun0 doesn't seem to work

    Read the article

  • What benefits are there to storing Javascript in external files vs in the <head>?

    - by RenderIn
    I have an Ajax-enabled CRUD application. If I display a record from my database it shows that record's values for each column, including its primary key. For the Ajax actions tied to buttons on the page I am able to set up their calls by printing the ID directly into their onclick functions when rendering the HTML server-side. For example, to save changes to the record I may have a button as follows, with '123' being the primary key of the record. <button type="button" onclick="saveRecord('123')">Save</button> Sometimes I have pages with Javascript generating HTML and Javascript. In some of these cases the primary key is not naturally available at that place in the code. In these cases I took a shortcut and generate buttons like so, taking the primary key from a place it happens to be displayed on screen for visual consumption: ... <td>Primary Key: </td> <td><span id="PRIM_KEY">123</span></td> ... <button type="button" onclick="saveRecord(jQuery('#PRIM_KEY').text())">DoSomething</button> This definitely works, but it seems wrong to drive database queries based on the value of text whose purpose was user consumption rather than method consumption. I could solve this by adding a series of additional parameters to various methods to usher the primary key along until it is eventually needed, but that also seems clunky. The most natural way for me to solve this problem would be to simply situate all the Javascript which currently lives in external files, in the <head> of the page. In that way I could generate custom Javascript methods without having to pass around as many parameters. Other than readability, I'm struggling to see what benefit there is to storing Javascript externally. It seems like it makes the already weak marriage between HTML/DOM and Javascript all the more distant. I've seen some people suggest that I leave the Javascript external, but do set various "custom" variables on the page itself, for example, in PHP: <script type="text/javascript"> var primaryKey = <?php print $primaryKey; ?>; </script> <script type="text/javascript" src="my-external-js-file-depending-on-primaryKey-being-set.js"></script> How is this any better than just putting all the Javascript on the page in the first place? There HTML and Javascript are still strongly dependent on each other.

    Read the article

  • Inserting contact with android and querying the result uri returns no entries

    - by th0m4d
    Im developing an application which is dealing with the android contacts API. I implemented methods to insert, update and query contacts. So far everything worked (writing and reading contacts). At one point in my project Im experiencing a strange behaviour. I insert a contact using batch mode. I receive the URI to the RawContact. I do this in a background thread. // use batchmode for contact insertion ArrayList ops = new ArrayList(); int rawContactInsertIndex = ops.size(); // create rawContact ops.add(ContentProviderOperation.newInsert(RawContacts.CONTENT_URI) .withValue(RawContacts.ACCOUNT_TYPE, ConstantsContract.ACCOUNT_TYPE) .withValue(RawContacts.ACCOUNT_NAME, accountName).build()); ops.add(createInsertOperation().withValueBackReference(Data.RAW_CONTACT_ID, rawContactInsertIndex) .withValue(Data.MIMETYPE, StructuredName.CONTENT_ITEM_TYPE) .withValue(StructuredName.DISPLAY_NAME, displayName).withValue(StructuredName.GIVEN_NAME, firstName) .withValue(StructuredName.FAMILY_NAME, lastName).build()); //other data values... ContentProviderResult[] results = context.getContentResolver().applyBatch(ContactsContract.AUTHORITY, ops); if (results.length 0) { result = results[0]; } Then i request and store the lookup uri RawContacts.getContactLookupUri(this.getContentResolver(), myContantRawContactUri); I am able to query the contact using the rawContactUri directly after inserting it (in the same thread). The lookup uri returns null. Uri rawContactUri = appUser.getRawContactUri(ctx); if (rawContactUri == null) { return null; } String lastPathSegment = rawContactUri.getLastPathSegment(); long rawContactId = Long.decode(lastPathSegment); if (rawContactUri != null) { contact = readContactWithID(rawContactId, ContactsContract.Data.RAW_CONTACT_ID); In a different place in the project I want to query the contact i inserted by the stored lookup uri or raw contact uri. Both return no rows from the content provider. I tried it in the main thread and in another background thread. ctx.getContentResolver().query(ContactsContract.Data.CONTENT_URI, null, ContactsContract.Data.RAW_CONTACT_ID + " = ? AND " + ContactsContract.Data.MIMETYPE + " = ?", new String[] { contactID + "", ContactsContract.CommonDataKinds.StructuredName.CONTENT_ITEM_TYPE }, null); My first thought was that it could be related to the context.getContentResolver(). But the android documentation states, that the ContentResolver objects scope is the application's package, so you have on ContentResolver for the whole app. Am I right? What am I doing wrong? Why does the same rawContactUri return the contact at one place and does not on another place? And why do I get a lookup uri from a raw contact, which is not working at all?

    Read the article

  • Add UIView Above All Other Views, Including StatusBar

    - by Mike Stead
    I'm wanting to create a view (UIControl) which blocks all input and shows a UIActivityIndicatorView while authenticating a user. The UIActionSheet and UIAlertView both manage to add a black semi-transparent view over the top of all other views to block input and I'd like to do similar. I've tried adding my view to the top UIWindow in the [[UIApplication sharedApplication] windows] array, and while this does place it above the UIKeyboard if it's visible, it doesn't place it over the StatusBar (which makes sense). My next attempt was to extend UIAlertView, remove all of its subviews and set its layer.contents = nil, then add the ActivityIndicator as a subview. This works well, but I can't seem to kill the default bouncy transition of the UIAlertView when you call it to "show". Does anyone have any pointers towards the best way tackle this problem that gives me full control? Oh and I know blocking input is not great but I do ensure it's for a short period of time and it has the benefit of making it clear to the user that their action, which must complete for them to progress, is processing.

    Read the article

  • Setting Up a Virtual Sound Device To Stream Output via TCP/IP

    - by Martindale
    I'm interested in installing a custom driver / device that will open a socket (or listen) and stream audio via TCP/IP in both Windows and Linux. I would like to be able to specify this device as my "Output" for specific applications so that I can route my audio through a completely unique machine (for example, in complex Synergy setups where my headphones might be connected to one machine, but audio is being generated by another.) In Linux, I expect this to be very easy, but I anticipate having to install a custom driver in Windows.

    Read the article

  • Is it inmoral to put a captcha on a login form?

    - by azkotoki
    In a recent project I put a captcha test on a login form, in order to stop possible brute force attacks. The inmediate reaction of other coworkers was a request to remove it, saying that it was innapropiate for that purpose, and that it was quite exotic to see a captcha in that place. I've seen captcha images on signup, contact, password recovery forms, etc. So I personally don't see innapropiate to put a captcha also on a place like that. Well, it obviously burns down usability a little bit, but it's a matter of time and getting used to it. With the lack of a captcha test, one would have to put some sort of blacklist / account locking mechanism, which also has some drawbacks. Is it a good choice for you? Am I getting somewhat captcha-aholic and need some sort of group therapy? Thanks in advance.

    Read the article

  • Response.Redirect in HttpModule

    - by AgentHunt
    Can I do a redirect to a custom page in an HttpModule? I have an HttpModule A which executes some javascript code when any aspx page is loaded. I would like to have a server side code check to see if the clients browsers supports cookies. Can I place that code in the HttpModule A? If so, in which event? Or do I need to have a new HttpHandler for both purposes? Also, is it possible to check for cookies in an HttpModule(without a response.redirect)? All solutions I have seen need 2 pages, 1 for setting the cookie and the other for checking if the cookie has actually been created. I am hoping there should be a way to check for cookies at one place. Thanks in advance

    Read the article

  • Can i make an installer for my delphi programme?

    - by Hendriksen123
    I have made a delphi programme, which consists of a .exe and two custom file types that i have made (called Data.data and variables.data) I want to create a programme / find a programme that would place a copy of the main .exe in a folder in the program folders of XP, along with the .data files, and then place a shortcut to the programme on the desktop (ideally it would also put a folder in the start menu - all programmes with the programme. I should probably also make an uninstaller as well, that would remove the desktop shortcut, and delete the files. Is there a free piece of software i can use to create this, or is there any way i could achieve this myself through delphi?

    Read the article

< Previous Page | 98 99 100 101 102 103 104 105 106 107 108 109  | Next Page >