Search Results

Search found 3325 results on 133 pages for 'route'.

Page 102/133 | < Previous Page | 98 99 100 101 102 103 104 105 106 107 108 109  | Next Page >

• How can I get my routers to forward ports correctly?

  - by Giffyguy

  My network currently looks like this (simplified): Note that Router #2 is connected to the LAN interface of Router #1. This should be familiar to anyone who has seen a standard static-IP setup with an additional firewall for a residence or other small building. Router #1 is actually my cable gateway, but since it is a fully functional router/firewall, I am going to refer to it as a router. Now, I need to open various ports in both firewalls for incoming communication to my server - port 80 is a good example. So I've opened up port 80 in Router #2, and so far all incoming traffic at the public IP X.X.X.129 is being routed correctly. The problem is that I also need my server to respond to incoming traffic at the public IP X.X.X.130 on the WAN interface of Router #1. Naturally, I can't just tell Router #1 to forward port 80 to another public IP. Port forwarding is only supported when the traffic is being directed to the LAN subnet. I am willing to restructure my network topology if required, with the following conditions: Router #1 cannot have its WAN IP reassigned - X.X.X.130 is mandatory. Router #1 cannot be moved or disconnected from the cloud. The server cannot be given a second IP address. I would prefer the server to have a private IP address - e.g. 10.0.0.10 I'd like to keep Router #2, but it can have a private IP - e.g. 10.0.1.10 Following these rules, I need to get my server to receive incoming traffic on port 80 from both public IP addresses. Does anyone on SU know if this is possible? So far my only theories have been to set up a static route on either router, or to somehow combine my two subnets into a single subnet.

  Read the article

• Secondary IP (eth0:0) acts like main server IP

  - by George Tasioulis

  I have a CentOS server, configured with 4 consecutive IPs: eth0 5.x.x.251 eth0:0 5.x.x.252 eth0:1 5.x.x.253 eth0:2 5.x.x.254 The problem is that all traffic goes out to the internet with eth0:0 (5.x.x.252) as the source IP, instead of eth0. # curl ifconfig.me 5.x.x.252 How can I fix this, so that all traffic goes out via eth0, ie my main IP? PS: My server is VPS running on a Xen dom0, the latter being configured in routed mode networking. Thanks in advance! Server configuration # ifconfig eth0 Link encap:Ethernet HWaddr 00:x:x:x:x:AE inet addr:5.x.x.251 Bcast:5.x.x.255 Mask:255.255.255.255 inet6 addr: fe80::x:x:x:x/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:14675569 errors:0 dropped:0 overruns:0 frame:0 TX packets:9463227 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4122016502 (3.8 GiB) TX bytes:25959110751 (24.1 GiB) Interrupt:23 eth0:0 Link encap:Ethernet HWaddr 00:x:x:x:x:AE inet addr:5.x.x.252 Bcast:5.x.x.255 Mask:255.255.255.224 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:23 eth0:1 Link encap:Ethernet HWaddr 00:x:x:x:x:AE inet addr:5.x.x.253 Bcast:5.x.x.255 Mask:255.255.255.224 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:23 eth0:2 Link encap:Ethernet HWaddr 00:x:x:x:x:AE inet addr:5.x.x.254 Bcast:5.x.x.255 Mask:255.255.255.224 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:23 # cat /etc/hosts 127.0.0.1 localhost.localdomain localhost 5.x.x.251 [fqdn] [hostname] # cat ifcfg-eth0 DEVICE=eth0 BOOTPROTO=static ONBOOT=yes IPADDR=5.x.x.251 NETMASK=255.255.255.224 SCOPE="peer 5.x.y.82" # cat ifcfg-eth0:0 DEVICE=eth0:0 BOOTPROTO=static ONBOOT=yes IPADDR=5.x.x.252 NETMASK=255.255.255.224 # cat route-eth0 ADDRESS0=0.0.0.0 NETMASK0=0.0.0.0 GATEWAY0=5.x.y.82 # netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 5.x.y.82 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 5.x.x.224 0.0.0.0 255.255.255.224 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 0.0.0.0 5.x.y.82 0.0.0.0 UG 0 0 0 eth0

  Read the article

• Installing FIREFOX with extensions/addons manually? (not really auto install)

  - by BrownChiLD

  I've been reading around with regards to creating firefox installers, bundling it w/ addons, using scripts, and CLI lines and a whole bunch of stuffs ... but it seems that going through this route is just too complicated and time consuming.. Since i don't mind a bit of manually copying files and stuff, I was planning to do the following: on my test machine, 1) install firefox on a machine AND configure it the way i want it 2) install addons AND set the configurations for it 3) set advanced configurations for firefox (about:config) Then once i'm all set, I just simply copy the contents of the firefox/profiles folder (for this particular tests it's ....\AppData\Local\Mozilla\Firefox\Profiles\6m0mef0s.default for deployment, all i have to do is: 1) Install the same version (offline installer) of the Firefox i used.. 2) overwrite the contents of the new profiles folder (randomly named by Firefox installer as usual) .. This should set all my configs and addons right? or what other folders do i have to backup and copy manually into the new profiles folder? I don't think i need to tinker w/ any registries right? anyway, if this works, though it's a bit manual, it's a whole lot simplier, and straight forward than fiddling w/ Installers and Packages etc.. PS I do this a lot w/ other simple (and some complex) software that i use and they seem to work fine for years.. i'm just not sure with firefox and how it's structured..

  Read the article

• Azure load-balancing strategy

  - by growse

  I'm currently building out a small web deployment using VM instances on MS Azure. The main problem I'm facing at the moment is trying to figure out how to get the load-balancing to detect if a particular VM has failed and not route traffic to that VM. As far as I can tell, there are only only two load-balancing options: Have multiple VMs (web01, web02, web03 etc.) within the same 'cloud service' behind a single VIP, and configure the endpoints to be load balanced. Create multiple 'cloud services', put a single web VM in each and create a traffic manager service across all these services. It appears that (1) is extremely simplistic and doesn't attempt to do any host failure detection. (2) appears to be much more varied, but requires me to put all my webservers in their own individual cloud service. Traffic manager appears to be much more directed at a geographic failover scenario, where you have multiple cloud services across different regions. This approach also has the disadvantage in that my web servers won't be able to communicate with my databases on internal IP addresses, unlike scenario (1). What's the best approach here?

  Read the article

• "ImportError: No module named flask" - Trouble with nginx + uWSGI + Flask in a virtualenv setup

  - by vjk2005

  I got nginx + uWSGI running on localhost inside a virtualenv with a simple hello world program, but I get this error when I replace the hello world with a simple Flask app: File "./wsgi_configuration_module.py", line 1, in <module> from flask import Flask ImportError: No module named flask unable to load app mountpoint Here's the flask app (wsgi_configuration_module.py): from flask import Flask application = Flask(__name__) @application.route("/") def hello(): return "hello world" if __name__ == "__main__": application.run() uWSGI config (app_conf.xml): <uwsgi> <socket>127.0.0.1:9001</socket> <chdir>/srv/www/labs/application</chdir> <pythonpath>/srv/www</pythonpath> <module>wsgi_configuration_module</module> <callable>application</callable> <no-site>true</no-site> </uwsgi> nginx config: server { listen 80; server_name localhost; access_log /srv/www/labs/logs/access.log; error_log /srv/www/labs/logs/error.log; location / { include uwsgi_params; uwsgi_pass 127.0.0.1:9001; } location /static { root /srv/www/labs/public_html/static/; index index.html index.htm; } } virtualenv stored in ~/virtual_env with Python 2.7 + nginx + uWSGI + Flask installed in a virtualenv called basic. Things I've tried to solve this: set the --home (-H) option to my virtualenv folder ~/virtual_env while running uWSGI. Other info: I have the same setup working outside of a virtualenv. Things go wrong only when I try to replicate the setup inside of a virtualenv. Where have I gone wrong?

  Read the article

• NATing IPv4 while routing IPv6

  - by Hugo

  I've the following setup: client(s) <---> (eth0) router (eth1) <---> wan I have a static IPv4 address and a /48 IPv6 address block. I need to connect all the clients to (wan). Each client will have it's own public IPv6. Meanwhile, I need to NAT those same clients over to (wan). Everything IPv4-related and the NAT are working fine. The IPv6 communication to/from (eth0)<-(clients) works fine, as does the IPv6 communication from (eth1)<-(wan) works fine. To provide IPv6 to all my clients, I've thought of too choices: Having the router as a gateway, which different IP on each interface. This sounds like I need to tell my ISP to route the entire block through that single IP, so it's not really an option. Transparently pass IPv6 packets to/from eth0<-eth1, so all clients can communicate with the upstream gateway (I would actually have a switch here if it weren't for the need to remain IPv4 compatible). So, since I've opted for the second choice, I'm in doubt: How can I pass all IPv6 traffic from eth0 to eth1 transparently? What I need is a level 3 bridge, but linux's bridgeutils create a level 2 bridge (which would bridge ipv4 as well, and I can't have that). This is a DD-WRT device, but it's pretty much an embeded linux, so most suggestions that would work on linux are welcome. Thanks.

  Read the article

• How to handle server failure in an n-tier architecture?

  - by andy

  Imagine I have an n-tier architecture in an auto-scaled cloud environment with say: a load balancer in a failover pair reverse proxy tier web app tier db tier Each tier needs to connect to the instances in the tier below. What are the standard ways of connecting tiers to make them resilient to failure of nodes in each tier? i.e. how does each tier get the IP addresses of each node in the tier below? For example if all reverse proxies should route traffic to all web app nodes, how could they be set up so that they don't send traffic to dead web app nodes, and so that when new web app nodes are brought online they can send traffic to it? I could run an agent that would update all the configs to all the nodes, but it seems inefficient. I could put an LB pair between each tier, so the tier above only needs to connect to the load balancers, but how do I handle the problem of the LBs dying? This just seems to shunt the problem of tier A needing to know the IPs of all nodes in tier B, to all nodes in tier A needing to know the IPs of all LBs between tiers A and B. For some applications, they can implement retry logic if they contact a node in the tier below that doesn't respond, but is there any way that some middleware could direct traffic to only live nodes in the following tier? If I was hosting on AWS I could use an ELB between tiers, but I want to know how I could achieve the same functionality myself. I've read (briefly) about heartbeat and keepalived - are these relevant here? What are the virtual IPs they talk about and how are they managed? Are there still single points of failure using them?

  Read the article

• Vyatta masquerade out bridge interface

  - by miquella

  We have set up a Vyatta Core 6.1 gateway on our network with three interfaces: eth0 - 1.1.1.1 - public gateway/router IP (to public upstream router) eth1 - 2.2.2.1/24 - public subnet (connected to a second firewall 2.2.2.2) eth2 - 10.10.0.1/24 - private subnet Our ISP provided the 1.1.1.1 address for us to use as our gateway. The 2.2.2.1 address is so the other firewall (2.2.2.2) can communicate to this gateway which then routes the traffic out through the eth0 interface. Here is our current configuration: interfaces { bridge br100 { address 2.2.2.1/24 } ethernet eth0 { address 1.1.1.1/30 vif 100 { bridge-group { bridge br100 } } } ethernet eth1 { bridge-group { bridge br100 } } ethernet eth2 { address 10.10.0.1/24 } loopback lo { } } service { nat { rule 100 { outbound-interface eth0 source { address 10.10.0.1/24 } type masquerade } } } With this configuration, it routes everything, but the source address after masquerading is 1.1.1.1, which is correct, because that's the interface it's bound to. But because of some of our requirements here, we need it to source from the 2.2.2.1 address instead (what's the point of paying for a class C public subnet if the only address we can send from is our gateway!?). I've tried binding to br100 instead of eth0, but it doesn't seem to route anything if I do that. I imagine I'm just missing something simple. Any thoughts?

  Read the article

• Unable to logon to vpn

  - by nitin pande

  My openvpn client log file- The interesting bit: Tue Oct 26 12:32:49 2010 TLS Error: cannot locate HMAC in incoming packet from 67.228.223.12:3389 Tue Oct 26 12:32:49 2010 Fatal TLS error (check_tls_errors_co), restarting Tue Oct 26 12:32:49 2010 TCP/UDP: Closing socket The rest of the log just in case: Tue Oct 26 12:32:35 2010 OpenVPN 2.0.9 Win32-MinGW [SSL] [LZO] built on Oct 1 2006 Tue Oct 26 12:32:48 2010 IMPORTANT: OpenVPN's default port number is now 1194, based on an official port number assignment by IANA. OpenVPN 2.0-beta16 and earlier used 5000 as the default port. Tue Oct 26 12:32:48 2010 Control Channel Authentication: using 'ta.key' as a OpenVPN static key file Tue Oct 26 12:32:48 2010 Outgoing Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication Tue Oct 26 12:32:48 2010 Incoming Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication Tue Oct 26 12:32:48 2010 LZO compression initialized Tue Oct 26 12:32:48 2010 Control Channel MTU parms [ L:1544 D:168 EF:68 EB:0 ET:0 EL:0 ] Tue Oct 26 12:32:48 2010 Data Channel MTU parms [ L:1544 D:1450 EF:44 EB:135 ET:0 EL:0 AF:3/1 ] Tue Oct 26 12:32:48 2010 Local Options hash (VER=V4): 'ee93268d' Tue Oct 26 12:32:48 2010 Expected Remote Options hash (VER=V4): 'bd577cd1' Tue Oct 26 12:32:48 2010 Attempting to establish TCP connection with 67.228.223.12:3389 Tue Oct 26 12:32:48 2010 TCP connection established with 67.228.223.12:3389 Tue Oct 26 12:32:48 2010 TCPv4_CLIENT link local: [undef] Tue Oct 26 12:32:48 2010 TCPv4_CLIENT link remote: 67.228.223.12:3389 Tue Oct 26 12:32:49 2010 TLS: Initial packet from 67.228.223.12:3389, sid=bd5f79fe 8475497f Tue Oct 26 12:32:49 2010 TLS Error: cannot locate HMAC in incoming packet from 67.228.223.12:3389 Tue Oct 26 12:32:49 2010 Fatal TLS error (check_tls_errors_co), restarting Tue Oct 26 12:32:49 2010 TCP/UDP: Closing socket Tue Oct 26 12:32:49 2010 SIGUSR1[soft,tls-error] received, process restarting Tue Oct 26 12:32:49 2010 Restart pause, 5 second(s) Tue Oct 26 12:32:54 2010 IMPORTANT: OpenVPN's default port number is now 1194, based on an official port number assignment by IANA. OpenVPN 2.0-beta16 and earlier used 5000 as the default port. Tue Oct 26 12:32:54 2010 Re-using SSL/TLS context Tue Oct 26 12:32:54 2010 LZO compression initialized Tue Oct 26 12:32:54 2010 Control Channel MTU parms [ L:1544 D:168 EF:68 EB:0 ET:0 EL:0 ] Tue Oct 26 12:32:54 2010 Data Channel MTU parms [ L:1544 D:1450 EF:44 EB:135 ET:0 EL:0 AF:3/1 ] Tue Oct 26 12:32:54 2010 Local Options hash (VER=V4): 'ee93268d' Tue Oct 26 12:32:54 2010 Expected Remote Options hash (VER=V4): 'bd577cd1' Tue Oct 26 12:32:54 2010 Attempting to establish TCP connection with 67.228.223.12:3389 Tue Oct 26 12:32:54 2010 TCP connection established with 67.228.223.12:3389 Tue Oct 26 12:32:54 2010 TCPv4_CLIENT link local: [undef] Tue Oct 26 12:32:54 2010 TCPv4_CLIENT link remote: 67.228.223.12:3389 Tue Oct 26 12:32:54 2010 TLS: Initial packet from 67.228.223.12:3389, sid=1643b931 ce240d5f Tue Oct 26 12:32:54 2010 TLS Error: cannot locate HMAC in incoming packet from 67.228.223.12:3389 Tue Oct 26 12:32:54 2010 Fatal TLS error (check_tls_errors_co), restarting Tue Oct 26 12:32:54 2010 TCP/UDP: Closing socket Tue Oct 26 12:32:54 2010 SIGUSR1[soft,tls-error] received, process restarting Tue Oct 26 12:32:54 2010 Restart pause, 5 second(s) Tue Oct 26 12:32:59 2010 IMPORTANT: OpenVPN's default port number is now 1194, based on an official port number assignment by IANA. OpenVPN 2.0-beta16 and earlier used 5000 as the default port. Tue Oct 26 12:32:59 2010 Re-using SSL/TLS context Tue Oct 26 12:32:59 2010 LZO compression initialized Tue Oct 26 12:32:59 2010 Control Channel MTU parms [ L:1544 D:168 EF:68 EB:0 ET:0 EL:0 ] Tue Oct 26 12:32:59 2010 Data Channel MTU parms [ L:1544 D:1450 EF:44 EB:135 ET:0 EL:0 AF:3/1 ] Tue Oct 26 12:32:59 2010 Local Options hash (VER=V4): 'ee93268d' Tue Oct 26 12:32:59 2010 Expected Remote Options hash (VER=V4): 'bd577cd1' Tue Oct 26 12:32:59 2010 Attempting to establish TCP connection with 67.228.223.12:3389 Tue Oct 26 12:33:00 2010 TCP connection established with 67.228.223.12:3389 Tue Oct 26 12:33:00 2010 TCPv4_CLIENT link local: [undef] Tue Oct 26 12:33:00 2010 TCPv4_CLIENT link remote: 67.228.223.12:3389 Tue Oct 26 12:33:00 2010 TLS: Initial packet from 67.228.223.12:3389, sid=cd439fb2 d625ca0d Tue Oct 26 12:33:00 2010 TLS Error: cannot locate HMAC in incoming packet from 67.228.223.12:3389 Tue Oct 26 12:33:00 2010 Fatal TLS error (check_tls_errors_co), restarting Tue Oct 26 12:33:00 2010 TCP/UDP: Closing socket Tue Oct 26 12:33:00 2010 SIGUSR1[soft,tls-error] received, process restarting Tue Oct 26 12:33:00 2010 Restart pause, 5 second(s) Tue Oct 26 12:33:05 2010 IMPORTANT: OpenVPN's default port number is now 1194, based on an official port number assignment by IANA. OpenVPN 2.0-beta16 and earlier used 5000 as the default port. Tue Oct 26 12:33:05 2010 Re-using SSL/TLS context Tue Oct 26 12:33:05 2010 LZO compression initialized Tue Oct 26 12:33:05 2010 Control Channel MTU parms [ L:1544 D:168 EF:68 EB:0 ET:0 EL:0 ] Tue Oct 26 12:33:05 2010 Data Channel MTU parms [ L:1544 D:1450 EF:44 EB:135 ET:0 EL:0 AF:3/1 ] Tue Oct 26 12:33:05 2010 Local Options hash (VER=V4): 'ee93268d' Tue Oct 26 12:33:05 2010 Expected Remote Options hash (VER=V4): 'bd577cd1' Tue Oct 26 12:33:05 2010 Attempting to establish TCP connection with 67.228.223.12:3389 Tue Oct 26 12:33:06 2010 TCP connection established with 67.228.223.12:3389 Tue Oct 26 12:33:06 2010 TCPv4_CLIENT link local: [undef] Tue Oct 26 12:33:06 2010 TCPv4_CLIENT link remote: 67.228.223.12:3389 Tue Oct 26 12:33:06 2010 TLS: Initial packet from 67.228.223.12:3389, sid=28f0cb87 69c90cde Tue Oct 26 12:33:06 2010 TLS Error: cannot locate HMAC in incoming packet from 67.228.223.12:3389 Tue Oct 26 12:33:06 2010 Fatal TLS error (check_tls_errors_co), restarting Tue Oct 26 12:33:06 2010 TCP/UDP: Closing socket Tue Oct 26 12:33:06 2010 SIGUSR1[soft,tls-error] received, process restarting Tue Oct 26 12:33:06 2010 Restart pause, 5 second(s) Tue Oct 26 12:33:11 2010 IMPORTANT: OpenVPN's default port number is now 1194, based on an official port number assignment by IANA. OpenVPN 2.0-beta16 and earlier used 5000 as the default port. Tue Oct 26 12:33:11 2010 Re-using SSL/TLS context Tue Oct 26 12:33:11 2010 LZO compression initialized Tue Oct 26 12:33:11 2010 Control Channel MTU parms [ L:1544 D:168 EF:68 EB:0 ET:0 EL:0 ] Tue Oct 26 12:33:11 2010 Data Channel MTU parms [ L:1544 D:1450 EF:44 EB:135 ET:0 EL:0 AF:3/1 ] Tue Oct 26 12:33:11 2010 Local Options hash (VER=V4): 'ee93268d' Tue Oct 26 12:33:11 2010 Expected Remote Options hash (VER=V4): 'bd577cd1' Tue Oct 26 12:33:11 2010 Attempting to establish TCP connection with 67.228.223.12:3389 Tue Oct 26 12:33:11 2010 TCP connection established with 67.228.223.12:3389 Tue Oct 26 12:33:11 2010 TCPv4_CLIENT link local: [undef] Tue Oct 26 12:33:11 2010 TCPv4_CLIENT link remote: 67.228.223.12:3389 Tue Oct 26 12:33:12 2010 TLS: Initial packet from 67.228.223.12:3389, sid=128becf9 f62adf0c Tue Oct 26 12:33:12 2010 TLS Error: cannot locate HMAC in incoming packet from 67.228.223.12:3389 Tue Oct 26 12:33:12 2010 Fatal TLS error (check_tls_errors_co), restarting Tue Oct 26 12:33:12 2010 TCP/UDP: Closing socket Tue Oct 26 12:33:12 2010 SIGUSR1[soft,tls-error] received, process restarting Tue Oct 26 12:33:12 2010 Restart pause, 5 second(s) Tue Oct 26 12:33:17 2010 IMPORTANT: OpenVPN's default port number is now 1194, based on an official port number assignment by IANA. OpenVPN 2.0-beta16 and earlier used 5000 as the default port. Tue Oct 26 12:33:17 2010 Re-using SSL/TLS context Tue Oct 26 12:33:17 2010 LZO compression initialized Tue Oct 26 12:33:17 2010 Control Channel MTU parms [ L:1544 D:168 EF:68 EB:0 ET:0 EL:0 ] Tue Oct 26 12:33:17 2010 Data Channel MTU parms [ L:1544 D:1450 EF:44 EB:135 ET:0 EL:0 AF:3/1 ] Tue Oct 26 12:33:17 2010 Local Options hash (VER=V4): 'ee93268d' Tue Oct 26 12:33:17 2010 Expected Remote Options hash (VER=V4): 'bd577cd1' Tue Oct 26 12:33:17 2010 Attempting to establish TCP connection with 67.228.223.12:3389 Tue Oct 26 12:33:20 2010 TCP/UDP: Closing socket Tue Oct 26 12:33:20 2010 SIGTERM[hard,init_instance] received, process exiting Guys I am extremely sorry for not presenting my error Log properly, please forgive me and give me your valuable advice. I am using windows 7 and I am using openvpn mainly to bypass censorship at UAE. I am using only client config file. Ca.crt file is in config folder Thanks and regards Nitin My error Log with Config1 file Tue Oct 26 21:24:34 2010 OpenVPN 2.0.9 Win32-MinGW [SSL] [LZO] built on Oct 1 2006 Tue Oct 26 21:24:46 2010 IMPORTANT: OpenVPN's default port number is now 1194, based on an official port number assignment by IANA. OpenVPN 2.0-beta16 and earlier used 5000 as the default port. Tue Oct 26 21:24:46 2010 Control Channel Authentication: using 'ta.key' as a OpenVPN static key file Tue Oct 26 21:24:46 2010 Outgoing Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication Tue Oct 26 21:24:46 2010 Incoming Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication Tue Oct 26 21:24:46 2010 LZO compression initialized Tue Oct 26 21:24:46 2010 Control Channel MTU parms [ L:1544 D:168 EF:68 EB:0 ET:0 EL:0 ] Tue Oct 26 21:24:46 2010 Data Channel MTU parms [ L:1544 D:1450 EF:44 EB:135 ET:0 EL:0 AF:3/1 ] Tue Oct 26 21:24:46 2010 Local Options hash (VER=V4): 'ee93268d' Tue Oct 26 21:24:46 2010 Expected Remote Options hash (VER=V4): 'bd577cd1' Tue Oct 26 21:24:46 2010 Attempting to establish TCP connection with 67.228.223.12:3389 Tue Oct 26 21:24:47 2010 TCP connection established with 67.228.223.12:3389 Tue Oct 26 21:24:47 2010 TCPv4_CLIENT link local: [undef] Tue Oct 26 21:24:47 2010 TCPv4_CLIENT link remote: 67.228.223.12:3389 Tue Oct 26 21:24:47 2010 TLS: Initial packet from 67.228.223.12:3389, sid=4244e662 e5a0572a Tue Oct 26 21:24:47 2010 TLS Error: cannot locate HMAC in incoming packet from 67.228.223.12:3389 Tue Oct 26 21:24:47 2010 Fatal TLS error (check_tls_errors_co), restarting Tue Oct 26 21:24:47 2010 TCP/UDP: Closing socket Tue Oct 26 21:24:47 2010 SIGUSR1[soft,tls-error] received, process restarting client config file: client dev tun proto tcp remote openvpn1.flashvpn.com 3389 float resolv-retry infinite nobind persist-key persist-tun ca ca.crt ns-cert-type server tls-auth ta.key 1 comp-lzo verb 3 mute 20 auth-user-pass route-method exe route-delay 2

  Read the article

• How do I set up DNS with nic.io to point to an AWS EC2 server?

  - by Chad Johnson

  I purchased a domain one week ago via nic.io. I have elected to provide my own DNS [because they provided no other option]. I'm trying to point my .io domain at my EC2 server instance. I've allocated an elastic IP and associated it with the instance. I can SSH into the instance and access point 80 via the IP address just fine. The IP is 54.235.201.241. nic.io support said the following: "You have selected to provide your own DNS and therefore if there is an issue with the set-up of the name servers you will need to contact your DNS provider." So, I created a Hosted Zone via Route 53 in AWS. This created NS and SOA records. I then set the Primary and Secondary servers at nic.io's domain admin page to the SOA record domains. Additionally, I set the optional servers to the NS domains. I did this two days ago, and I can't access the server via the domain. I ran a DNS check here...still not sure what I need to do: http://mydnscheck.com/?domain=chadjohnson.io&ns1=&ns2=&ns3=&ns4=&ns5=&ns6=. I have no idea what I'm supposed to do. Does anyone have any ideas?

  Read the article

• Will having 2 MX records pointing to different mail server types cause delivery issues?

  - by Lyken

  I've inherited a setup where the mail server is exchange 2010. For some reason, I'm not sure why there is 2 MX records setup. One being the exchange server which is the higher priority while the external (non-exchange) server is the secondary mx record. I don't believe this was done for redundancy reasons as the other mail server is not set to route mail back to the exchange server (it's just the webhosts email for their hosting) The client has been experiencing disappearing email, however after my investigations its not actually disappearing, but exchange is successfully receiving the mail and then passing it on to the external server. It isn't happening all the time, just with some email messages from some domains. My question: Is exchange passing the mail on because it can see the secondary MX record and is configured (somewhere) to send mail out? If so, how do I stop it? Is it as easy as just removing the second MX record pointing to the external mail server and exchange will stop passing mail on? I'm not exchange expert so I'm kinda stumped. Exchange MX tools are saying everything is setup and configured correctly from an external point of view.

  Read the article

• Giving VPN connections access to all locations?

  - by Jeff

  I have asked a similiar question, but didn't get any answers so i am going to try and rephrase. i have 4 locations corporate and 3 remotes when you are at the corporate location, you have full access to all networks. 192.168.3.x 192.168.2.x 192.168.1.x 192.168.0.x all locations are connected via site-to-site vpn with the corporate location. if you are at a remote location, you have access to that location & the corporate location. the corporate location handles all VPN traffic. however, when you VPN into the corporate location, you can not see outside the corporate location. can anyone provide some information or a link explaining how to allow the VPN users to see all locations? thanks static route configuration: Gateway of last resort is 207.255.x.1 to network 0.0.0.0 C 207.255.x.0 255.255.255.0 is directly connected, outside S 10.0.1.6 255.255.255.255 [1/0] via 207.255.x.1, outside S 10.0.1.5 255.255.255.255 [1/0] via 207.255.x.1, outside S 192.168.0.0 255.255.255.0 [1/0] via 192.168.0.1, inside C 192.168.1.0 255.255.255.0 is directly connected, inside S 192.168.2.0 255.255.255.0 [1/0] via 192.168.2.1, inside S 192.168.3.0 255.255.255.0 [1/0] via 192.168.3.1, inside S* 0.0.0.0 0.0.0.0 [1/0] via 207.255.x.1, outside [1/0] via 192.168.1.1, outside

  Read the article

• 502: proxy: pass request body failed

  - by Andrei Serdeliuc

  Sometimes I get the following error (in apache's error.log) when viewing my site over https: (502)Unknown error 502: proxy: pass request body failed to xxx.xxx.xxx.xxx:443 I'm not entirely sure what this is and why it happens, it's also not consistent. The request route is: Browser Proxy server (apache with mod_proxy + mod_ssl) Load balancer (aws) Web server (apache with mod_ssl) The configuration on the proxy server is as follows: <VirtualHost *:443> ProxyRequests Off ProxyVia On ServerName www.xxx.co.uk ServerAlias xxx.co.uk <Directory proxy:*> Order deny,allow Allow from all </Directory> <Proxy *> AddDefaultCharset off Order deny,allow Allow from all </Proxy> ProxyPass / balancer://cluster:443/ lbmethod=byrequests ProxyPassReverse / balancer://cluster:443/ ProxyPreserveHost off SSLProxyEngine On SSLEngine on SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL SSLCertificateFile /var/www/vhosts/xxx/ssl/www.xxx.co.uk.cert SSLCertificateKeyFile /var/www/vhosts/xxx/ssl/www.xxx.co.uk.key <Proxy balancer://cluster> BalancerMember https://xxx.eu-west-1.elb.amazonaws.com </Proxy> </VirtualHost> Any idea what the issue might be?

  Read the article

• Headless VirtualBox VM NAT Network

  - by dirt

  I have a remote linux server accessible through SSH only. My goal is to host multiple Virtual Machines on this host server using VirtualBox. The host server has 1 IP address, so NAT will be used to route to the VMs for example 10022 will forward to server1:22 and 20022 will forward to server2:22. I have installed VirtualBox and copied a pre-configured CentOS VM to the host server. I start the VM, but cannot establish a connection to the server for example ssh -p 10022 127.0.0.1 times out. I've tried many things: Method 1: Copied existing .vdi, attached to new VM Method 2: Imported .Ova VM (thought it would help any MAC re-init issues?) NAT network type, tried natnet1 192.168/16 and 10.0/16 VBoxManage modifyvm "hermes.awoms.com" --natnet1 "192.168/16" Port forwarding with and without specifying VM ip in modifyvm --natpf1 command VBoxManage modifyvm "hermes" --natpf1 "guestssh,tcp,,10022,,,22" VBoxManage modifyvm "hermes" --natpf1 "guestssh,tcp,,10022,192.168.0.15,22" I can't see if VM is even booting (VBoxHeadless "hermes" --start & runs with no errors) I can't tell if VM is getting an IP address Is there anything else I can do to get more information from VirtualBox or the VM starting up when the only access I have is SSH?

  Read the article

• PNP4Nagios, nagiosgraph, separate Cacti, or something else for Nagios trending

  - by Matt

  I've been using Nagios for a while now and recently started using Cacti after being dissatisfied with the lack of scaling and lack of any GUI in MRTG. I'm interested in adding trending to my Nagios installation and wondered what was the best route to go. I've looked around a bit and have seen what's available, but there's not a lot of information around to differentiate them from each other. My Nagios install has about 250 hosts and 1100 service checks, but many of them are just simple network devices and there's only about 20 servers and 300 services associated with them. All servers but 2 are running Windows Server 2003. What are the main highlights of PNP4Nagios vs. nagiosgraph, or would I be better off using some sort of tool to convert the data to RRD form and just view it directly in Cacti? Is there a completely different direction I could go that would be even better? Please comment if you need any more information, I tend to be too wordy and tried to keep this question brief. Thanks!

  Read the article

• KVM network bridge with two NICs

  - by Eil

  Greetings, I'm trying to set up bridged networking with KVM and am getting nowhere. There are docs and tutorials on the subject, but they all seem to conflict or don't provide enough info. I was wondering if someone can give me a high-level overview of how to get this working. I can probably work out the details myself (configuring the interfaces, adding routes, etc), I just need help on the big picture: how everything is interconnected. I have a RHEL5 server with KVM installed and running. It has two physical NICs, eth0 and eth1 in the same VLAN. I would like to use eth1 for all traffic between the guests and the rest of the network and reserve eth0 for host management, guest migrations, etc if possible. I'm not picky about which one gets the default route, although it would be nice if we could make it eth0. All of the guests will have static IPs. I would prefer that when a new guest is added, the networking configuration only needs to be set from within the guest itself. Basically, I want this: eth0: all host traffic eth1: all guest traffic Open to any other suggestions if this isn't possible or will be kludgy/difficult. Pointers to existing documentation might not be helpful since I've already been though just about everything out there. Thanks for any help.

  Read the article

• VPN Trunk Between Cisco ASA 5520 and DrayTek Vigor 2930

  - by David Heggie

  I'm a bit of a VPN newbie, so please go easy on me ... I'm trying to use the VPN trunking capabilities of the DrayTek Vigor 2930 firewall to bond two IPSec VPN connections to a Cisco ASA 5520 device and I'm getting myself tied in knots and hope someone here with more knowledge / experience can help. I have a remote site with two ADSL connections and the DrayTek box. The main office site has the Cisco ASA device. I am able to setup a single IPSec connection between the two sites on either of the ADSL connections' public IP addresses, but as soon as I try to use the VPN bonding, nothing works. The VPN tunnels are both still up, but the traffic is getting lost somewhere. I suspect it's due to the ASA not knowing how to route the traffic back over the VPN - one minute, traffic from my remote office's network is coming from public ip address #1, the next it's coming from public address #2 and it doesn't know what to do. Well, that's my newbie impression of what's going wrong, but I don't really know: If this is really what's happening If what I'm trying to do (bond two VPN connections from a single remote network to improve the bandwidth / resiliency) is possible with the kit I've got Could anyone help?

  Read the article

• SSH client and Command Prompt replacements Windows look-and-feel

  - by Oddthinking

  The Problem I've worked exclusively in Windows. I can handle that. I've worked exclusively in DOS (a long time ago!). I can handle that. I've worked exclusively in Unix. I can handle that. Right now, I am developing a command-line (python) application on a Windows machine, testing it in a DOS box (i.e. Windows' Command prompt), and then deploying it to Linux, and running it with PuTTY. I cannot handle that. My productivity drops dramatically when CTRL-C cuts in one window (Windows) and kills the process in another (DOS, Linux). My productivity drops dramatically when Enter copies the selection in one window (DOS), and deletes the selection in another (Windows), and runs the current half-edited command in the third (PuTTY). My productivity drops dramatically when I cannot hit Undo, Home or End. The Solution I am Seeking An SSH/Bash command-line client that runs on Windows and, to the extent possible, uses all the standard Windows shortcuts (Cut, Copy, Paste, Undo, Home, End, Insert, Shift-Arrows, etc.) work on a bash command line. Bonus points if it puts the cursor between letters, rather than on them. Plus, an equivalent DOS command-line drop-in that runs on Windows, and provides the same interface. I appreciate there may need to be special buttons to actually transfer CTRL codes (like CTRL-C) through in the cases I need them. I suspect the SSH client will need to be specific to a shell (so it knows when it is at the command prompt, and when it is inside a running app.) I know there are many SSH clients, but I am looking for advice for a particular need. PuTTY feels like an escape route for Unix programmers stuck on Windows. I am the opposite. Can anyone recommend one (or maybe a combination of an SSH client and an Command-Line replacement)?

  Read the article

• How do I get "Back to My Mac" (using MobileMe) from Windows?

  - by benzado

  I have a MobileMe subscription and a Mac at home with "Back to My Mac" enabled. When I'm away from home, this service lets me use another Mac to connect to my Mac back home and access file sharing, screen sharing, etc. As far as I know, the service doesn't use any proprietary protocols, so in theory I should also be able to get "Back to My Mac" from a Windows PC. This MacWorld article explains how it works. Basically, it uses Wide-Area Bonjour to give your Mac a domain name like hostname.username.members.mac.com. Remote computers can find your Mac using that address, then connect to it using a private VPN. The "Wide Area Bonjour" part seems to make it a little more complicated than simply a regular domain name, though. Note that I'm not interested in using the methods described by LifeHacker, which doesn't use the MobileMe service at all. I don't want to use a totally different dynamic DNS service. I'd like to use the one I'm already paying for, or at least find out why that's not possible from Windows. Also, my primary problem is finding a network route back to my mac... once I've got that I know how to enable services so that Windows can talk to it. UPDATE: Based on some additional research, it appears that Apple is only assigning IPv6 addresses to the hostname.username.members.mac.com names. So any solution will require enabling IPv6 support on Windows, if possible.

  Read the article

• MySQL-Cluster or Multi-Master for production? Performance issues?

  - by Phillip Oldham

  We are expanding our network of webservers on EC2 to a number of different regions and currently use master/slave replication. We've found that over the past couple of months our slave has stopped replicating a number of times which required us to clear the db and initialise the replication again. As we're now looking to have servers in 3 different regions we're a little concerned about these MySQL replication errors. We believe they're due to auto_increment values, so we're considering a number of approaches to quell these errors and stabilise replication: Multi-Master replication; 3 masters (one in each region), with the relevant auto_increment offsets, regularly backing up to S3. Or, MySQL-Cluster; 3 nodes (one in each region) with a separate management node which will also aggregate logs and statistics. After investigating it seems they both have down-sides (replication errors for the former, performance issues for the latter). We believe the cluster approach would allow us to manage and add new nodes more easily than the Multi-Master route, and would reduce/eliminate the replication issues we're currently seeing. But performance is a priority. Are the performance issues of MySQL-Cluster as bad as people say?

  Read the article

• OpenVPN: ifup tap0 drops all connections

  - by raspi

  I'm trying to create star shaped "virtual" LAN with OpenVPN which is not connected to physical network. ie. tap0 packets should not go to eth0. Packet should only go through OpenVPN to connected clients. This setup works with my OpenVPN testing machine which runs Virtual Box but not on my actual server which is running on top of Xen. Both servers are running Ubuntu Intrepid. /etc/network/interfaces: iface tap0 inet manual address 10.10.10.1 netmask 255.255.255.0 gateway 10.10.10.1 /etc/openvpn/server.conf mode server tls-server port 1194 proto udp dev tap client-to-client ca /etc/openvpn/easy-rsa/keys/ca.crt cert /etc/openvpn/easy-rsa/keys/servername.crt key /etc/openvpn/easy-rsa/keys/servername.key dh /etc/openvpn/easy-rsa/keys/dh384.pem ifconfig-pool-persist ipp.txt server-bridge 10.10.10.1 255.255.255.0 10.10.10.128 10.10.10.250 push .route 10.10.10.1 255.255.255.0 keepalive 5 60 comp-lzo persist-key persist-tun status /var/log/openvpn-status.log log-append /var/log/openvpn.log verb 3 user nobody group nogroup ifup tap0 on Virtual Box: everything ok, SSH keeps running. But on Xen SSH connection drops and I have to reboot whole machine. What I'm missing?

  Read the article

• How to get my W2003-server (back) into the web (after setting up bridged networking)

  - by MBaas

  I have recently set up Virtualbox on a W2003-Server (which is also used as webserver, accessed from the web). My vbox worked nicely, but then I wanted more, I wanted to have the vm appear in the intranet like any ordinary pc. I was advised to setup bridged networking as opposed to NAT. I did so, and in the server's network connections have bridged the LAN-Connection and the "VirtualBox Host-Only Network" (yes, it says "host only network", but I assure that VBox networking is configured to use network bridge). So now my VM is visible in the intranet and it also has www-accesss, the server can also access the web. The only problem that came up is that the server is no longer accessible from the web. I've traced an HTTP-Request and it says "Can't connect to *:80 (connect: No route to host)". So maybe something in the router's config needs to be adjusted (yeah, well, the server's IP-Address changed from 192.168.1.199 to ...198). So I went into the router-config, reviewed port-forwarding for port 80 and adjusted the IP there, but it still didn't work. Unsure if it was a router-problem or rather something in the server's config, I've setup a "demilitarized zone" in the router and have put the server into it. (My understanding is that this would put the server straight into the web...) But the result of the HTTP-Requests is still the same :(

  Read the article

• How to make Exchange 2003 non-authoritive

  - by Romski

  Background We are a small company with an internally hosted Exchange 2003. It receives email for 2 domains (the company was renamed a few years back). For the sake of argument, the domains are: oldname.com newname.com We have moved newname.com to a hosted exchange service, and our DNS record is correctly routing emails. Our internal server still receives email for oldname.com, although we have asked our hosting company to accept emails for that domain. Problem My problem is that emails generated internally from monitoring software, printer, etc. are being caught by our (defunct) internal server and being delivered to the old mailboxes. I believe that what is happening is that our internal exchange server considers itself to be the authoritive server for newname.com. I think it must be looking in active directory for a mailbox and delivering it internally without ever going outside. Attempt to fix I started to follow the article here: http://support.microsoft.com/kb/321721. I removed the SMTP recipient policy for newname.com, and added a dummy address and made it primary. I also answered yes for updating the associated emails. I then restarted the Microsoft Exchange Routing System and SMTP, but emails are still being routed internally. Is there a way to force the exchange server to route all emails for the domain newname.com to the new hosted service?

  Read the article

• Changing Mac OS X 10.6 Routing after VPN'd In

  - by Matt Rogish

  I have a coffee shop around the corner that I use to do some work when I want to get away from home. They offer free wi-fi and I then use my Mac 10.6 VPN to log into my work network. I have "Send all traffic over VPN connection" checked. Before, their network was 10.0.0.x. I think they got a new router because it's now 192.168.2.x However, this interferes with one of the subnets at work so now I can't visit 192.168.2.x at work. So: 1) Office network: VPN gives IPs as 192.168.1.x. Another network is 192.168.2.x 2) Coffee network: Gives IPs as 192.168.2.x I think if I set a route to send all 2.x traffic over the tunnel, it would blow up my routing to their system, right? What should I do? I know the individual IPs of the servers I want... Maybe I could add each one, or can I add all of them minus the default gateway of their router? How do I set that up "temporarily" in my Mac? Thanks!!

  Read the article

• Cisco ASA 5505: Force NAT before IPsec?

  - by WuckaChucka

  I'm trying to route public-to-public IPs over an IPSec tunnel. However, the src IP is not "interesting" to the Cisco's IPSec engine because it doesn't appear to be getting translated to the outside IP before being evaluated by the Cisco's IPSec engine. From WEST to EAST, my public-to-public IPSec works fine: I can make a request from 192.168.0.5:any to 200.200.200.200:80 because the Vyatta does the NAT translation before the IPSec tunnel inspects the traffic, so the remote-subnet and local-subnet matches (see below). However from EAST to WEST, I see a deny in my Cisco logging buffer for Deny tcp src inside:192.168.1.5/59195 dst outside:100.100.100.100/80 which leads me to believe that the IPSec engine is not matching the encrypt_acl because the address has not been translated yet. Any ideas? WEST (Vyatta): inside: 192.168.0.0/24 inside host: 192.168.0.5/24 outside: 100.100.100.100 IPSec local-subnet: 100.100.100.100/32 IPSec remote-subnet: 200.200.200.200/32 EAST (Cisco): inside: 192.168.1.0/24 inside host: 192.168.1.5/24 (DNAT'ed on port 80 to outside) outside: 200.200.200.200 IPSec local-subnet: 200.200.200.200/32 IPSec remote-subnet: 100.100.100.100/32

  Read the article

< Previous Page | 98 99 100 101 102 103 104 105 106 107 108 109  | Next Page >