Search Results

Search found 3062 results on 123 pages for 'zend translate'.

Page 102/123 | < Previous Page | 98 99 100 101 102 103 104 105 106 107 108 109  | Next Page >

• Height Map Mapping to "Chunked" Quadrilateralized Spherical Cube

  - by user3684950

  I have been working on a procedural spherical terrain generator for a few months which has a quadtree LOD system. The system splits the six faces of a quadrilateralized spherical cube into smaller "quads" or "patches" as the player approaches those faces. What I can't figure out is how to generate height maps for these patches. To generate the heights I am using a 3D ridged multi fractals algorithm. For now I can only displace the vertices of the patches directly using the output from the ridged multi fractals. I don't understand how I generate height maps that allow the vertices of a terrain patch to be mapped to pixels in the height map. The only thing I can think of is taking each vertex in a patch, plug that into the RMF and take that position and translate into u,v coordinates then determine the pixel position directly from the u,v coordinates and determine the grayscale color based on the height. I feel as if this is the right approach but there are a few other things that may further complicate my problem. First of all I intend to use "height maps" with a pixel resolution of 192x192 while the vertex "resolution" of each terrain patch is only 16x16 - meaning that I don't have any vertices to sample for the RMF for most of the pixels. The main reason the height map resolution is higher so that I can use it to generate a normal map (otherwise the height maps serve little purpose as I can just directly displace vertices as I currently am). I am pretty much following this paper very closely. This is, essentially, the part I am having trouble with. Using the cube-to-sphere mapping and the ridged multifractal algorithm previously described, a normalized height value ([0, 1]) is calculated. Using this height value, the terrain position is calculated and stored in the first three channels of the positionmap (RGB) – this will be used to calculate the normalmap. The fourth channel (A) is used to store the height value itself, to be used in the heightmap. The steps in the first sentence are my primary problem. I don't understand how the pixel positions correspond to positions on the sphere and what positions are sampled for the RMF to generate the pixels if only vertices cannot be used.

  Read the article

• 3D Model not translating correctly (visually)

  - by ChocoMan

  In my first image, my model displays correctly: But when I move the model's position along the Z-axis (forward) I get this, yet the Y-axis doesnt change. An if I keep going, the model disappears into the ground: Any suggestions as to how I can get the model to translate properly visually? Here is how Im calling the model and the terrain in draw(): cameraPosition = new Vector3(camX, camY, camZ); // Copy any parent transforms. Matrix[] transforms = new Matrix[mShockwave.Bones.Count]; mShockwave.CopyAbsoluteBoneTransformsTo(transforms); Matrix[] ttransforms = new Matrix[terrain.Bones.Count]; terrain.CopyAbsoluteBoneTransformsTo(ttransforms); // Draw the model. A model can have multiple meshes, so loop. foreach (ModelMesh mesh in mShockwave.Meshes) { // This is where the mesh orientation is set, as well // as our camera and projection. foreach (BasicEffect effect in mesh.Effects) { effect.EnableDefaultLighting(); effect.PreferPerPixelLighting = true; effect.World = transforms[mesh.ParentBone.Index] * Matrix.CreateRotationY(modelRotation) * Matrix.CreateTranslation(modelPosition); // Looking at the model (picture shouldnt change other than rotation) effect.View = Matrix.CreateLookAt(cameraPosition, modelPosition, Vector3.Up); effect.Projection = Matrix.CreatePerspectiveFieldOfView( MathHelper.ToRadians(45.0f), aspectRatio, 1.0f, 10000.0f); effect.TextureEnabled = true; } // Draw the mesh, using the effects set above. prepare3d(); mesh.Draw(); } //Terrain test foreach (ModelMesh meshT in terrain.Meshes) { foreach (BasicEffect effect in meshT.Effects) { effect.EnableDefaultLighting(); effect.PreferPerPixelLighting = true; effect.World = ttransforms[meshT.ParentBone.Index] * Matrix.CreateRotationY(0) * Matrix.CreateTranslation(terrainPosition); // Looking at the model (picture shouldnt change other than rotation) effect.View = Matrix.CreateLookAt(cameraPosition, terrainPosition, Vector3.Up); effect.Projection = Matrix.CreatePerspectiveFieldOfView( MathHelper.ToRadians(45.0f), aspectRatio, 1.0f, 10000.0f); effect.TextureEnabled = true; } // Draw the mesh, using the effects set above. prepare3d(); meshT.Draw(); DrawText(); } base.Draw(gameTime); } Im suspecting that there may be something wrong with how I'm handling my camera. The model rotates fine on its Y-axis.

  Read the article

• Business Insight, IT Execution: 9 Project Management Tips

  - by Sylvie MacKenzie, PMP

  Excerpt from Profit Magazine - by David Rosenbaum When Marcos Baccetto was first asked to be the business-side project lead on Eaton Corporation’s Vehicle Group South America (VGSA) Oracle project, the operations services manager responsible for running manufacturing was, he confesses, “a little afraid” because of his lack of IT experience. Today, Baccetto calls the project “a fantastic experience,” and he is a true believer in the benefits of a close relationship between IT implementers and their line-of-business peers. Through his partnership with Jesiele Lima, then VGSA IT manager, Baccetto and Eaton’s South American operations team came to understand several important principles of business and IT. Here he shares nine tips managers should consider when working on an enterprise technology project. 1. Make it a business project, not an IT project. All levels of functional management must have ownership, responsibility, and accountability for the success of the implementation. 2. Share responsibility. Business owners should sign off on tests and data conversion. 3. Clean your data. Dedicating a team to improve core data quality prior to project launch can be a significant time-saver. 4. Select resources properly. Have functional people who can translate business needs to IT and can influence organizational change. 5. Manage scope. Follow project management methodologies and disciplines. 6. Adopt common processes, global solutions. Avoid customized, local solutions. The big-picture business goals can get lost in the details. 7. Implement processes prior to the go-live date. Change management can be key. Keep the workforce informed and train users in advance. 8. Define metrics milestones. Assume there will be a crisis during deployment. Having baseline metrics to compare against will help implementers keep their cool—and the project moving forward. 9. The sponsor’s commitment is critical. It is needed to support the truly difficult decisions.

  Read the article

• 3D terrain map with Hexagon Grids (XNA)

  - by Rob

  I'm working on a hobby project (I'm a web/backend developer by day) and I want to create a 3D Tile (terrain) engine. I'm using XNA, but I can use MonoGame, OpenGL, or straight DirectX, so the answer does not have to be XNA specific. I'm more looking for some high level advice on how to approach this problem. I know about creating height maps and such, there are thousands of references out there on the net for that, this is a bit more specific. I'm more concerned with is the approach to get a 3D hexagon tile grid out of my terrain (since the terrain, and all 3d objects, are basically triangles). The first approach I thought about is to basically draw the triangles on the screen in the following order (blue numbers) to give me the triangles for terrain (black triangles) and then make hexes out of the triangles (red hex). http://screencast.com/t/ebrH2g5V This approach seems complicated to me since i'm basically having to draw 4 different types of triangles. The next approach I thought of was to use the existing triangles like I did for a square grid and get my hexes from 6 triangles as follows http://screencast.com/t/w9b7qKzVJtb8 This seems like the easier approach to me since there are only 2 types of triangles (i would have to play with the heights and widths to get a "perfect" hexagon, but the idea is the same. So I'm looking for: 1) Any suggestions on which approach I should take, and why. 2) How would I translate mouse position to a hexagon grid position (especially when moving the camera around), for example in the second image if the mouse pointer were the green circle, how would I determine to highlight that hexagon and then translating that into grid coordinates (assuming it is 0,0)? 3) Any references, articles, books, etc - to get me going in the right direction. Note: I've done hex grid's and mouse-grid coordinate conversion before in 2d. looking for some pointers on how to do the same in 3d. The result I would like to achieve is something similar to the following: http :// www. youtube .com / watch?v=Ri92YkyC3fw (sorry about the youtube link, but it will only let me post 2 links in this post... same rep problem i mention below...) Thanks for any help! P.S. Sorry for not posting the images inline, I apparently don't have enough rep on this stack exchange site.

  Read the article

• Walmart's Mobile Self-Checkout

  - by David Dorf

  Reuters recently reported that Walmart was testing an iPhone-based self-checkout at a store near its headquarters.  Consumers scan items as they're placed in the physical basket, then the virtual basket is transferred to an existing self-checkout station where payment is tendered.  A very solid solution, but not exactly original. Before we go further, let's look at the possible cost savings for Walmart.  According to the article: Pushing more shoppers to scan their own items and make payments without the help of a cashier could save Wal-Mart millions of dollars, Chief Financial Officer Charles Holley said on March 7. The company spends about $12 million in cashier wages every second at its Walmart U.S. stores. Um, yeah. Using back-of-the-napkin math, I calculated Walmart's cashiers are making $157k per hour.  A more accurate statement would be saving $12M per year for each second saved on the average transaction time.  So if this self-checkout approach saves 2 seconds per transaction on average, Walmart would save $24M per year on labor.  Maybe.  Sometimes that savings will be used to do other tasks in the store, so it may not directly translate to less employees. When I saw this approach demonstrated in Sweden, there were a few differences, which may or may not be in Walmart's plans.  First, the consumers were identified based on their loyalty card.  In order to offset the inevitable shrink, retailers need to save on labor but also increase basket size, typically via in-aisle promotions.  As they scan items, retailers should target promos, and that's easier to do if you know some shopping history.  Last I checked, Walmart had no loyalty program. Second, at the self-checkout station consumers were randomly selected for an audit in which they must re-scan all the items just like you do at a typical self-checkout.  If you were found to be stealing, your ability to use the system can be revoked.  That's a tough one in the US, especially when the system goes wrong, either by mistake or by lying.  At least in my view, the Swedes are bit more trustworthy than the people of Walmart. So while I think the idea of mobile self-checkout has merit, perhaps its not right for Walmart.

  Read the article

• Bullet Physics - Casting a ray straight down from a rigid body (first person camera)

  - by Hydrocity

  I've implemented a first person camera using Bullet--it's a rigid body with a capsule shape. I've only been using Bullet for a few days and physics engines are new to me. I use btRigidBody::setLinearVelocity() to move it and it collides perfectly with the world. The only problem is the Y-value moves freely, which I temporarily solved by setting the Y-value of the translation vector to zero before the body is moved. This works for all cases except when falling from a height. When the body drops off a tall object, you can still glide around since the translate vector's Y-value is being set to zero, until you stop moving and fall to the ground (the velocity is only set when moving). So to solve this I would like to try casting a ray down from the body to determine the Y-value of the world, and checking the difference between that value and the Y-value of the camera body, and disable or slow down movement if the difference is large enough. I'm a bit stuck on simply casting a ray and determining the Y-value of the world where it struck. I've implemented this callback: struct AllRayResultCallback : public btCollisionWorld::RayResultCallback{ AllRayResultCallback(const btVector3& rayFromWorld, const btVector3& rayToWorld) : m_rayFromWorld(rayFromWorld), m_rayToWorld(rayToWorld), m_closestHitFraction(1.0){} btVector3 m_rayFromWorld; btVector3 m_rayToWorld; btVector3 m_hitNormalWorld; btVector3 m_hitPointWorld; float m_closestHitFraction; virtual btScalar addSingleResult(btCollisionWorld::LocalRayResult& rayResult, bool normalInWorldSpace) { if(rayResult.m_hitFraction < m_closestHitFraction) m_closestHitFraction = rayResult.m_hitFraction; m_collisionObject = rayResult.m_collisionObject; if(normalInWorldSpace){ m_hitNormalWorld = rayResult.m_hitNormalLocal; } else{ m_hitNormalWorld = m_collisionObject->getWorldTransform().getBasis() * rayResult.m_hitNormalLocal; } m_hitPointWorld.setInterpolate3(m_rayFromWorld, m_rayToWorld, m_closestHitFraction); return 1.0f; } }; And in the movement function, I have this code: btVector3 from(pos.x, pos.y + 1000, pos.z); // pos is the camera's rigid body position btVector3 to(pos.x, 0, pos.z); // not sure if 0 is correct for Y AllRayResultCallback callback(from, to); Base::getSingletonPtr()->m_btWorld->rayTest(from, to, callback); So I have the callback.m_hitPointWorld vector, which seems to just show the position of the camera each frame. I've searched Google for examples of casting rays, as well as the Bullet documentation, and it's been hard to just find an example. An example is really all I need. Or perhaps there is some method in Bullet to keep the rigid body on the ground? I'm using Ogre3D as a rendering engine, and casting a ray down is quite straightforward with that, however I want to keep all the ray casting within Bullet for simplicity. Could anyone point me in the right direction? Thanks.

  Read the article

• Help with Collision of spawned object(postion fixed) with objects that there are translating on screen

  - by Amrutha

  Hey guys I am creating a game using Corona SDK and so coding it in Lua. So there are 2 separate functions, To translate the hit objects and change their color when they are tapped The link below is the code I am using to for the first function http://developer.anscamobile.com/sample-code/fishies Spawn objects that will hit the translating objects on collision. Alos on collision the spawned object disappears and the translating object bears a color(indicating the collision). In addition the size of this spawned object is dependent on i/p volume level. The function I have written is as follows: --VOICE INPUT CODE local r = media.newRecording() r:startRecording() r:startTuner() --local function newBar() -- local bar = display.newLine( 0, 0, 1, 0 ) -- bar:setColor( 0, 55, 100, 20 ) -- bar.width = 5 -- bar.y=400 -- bar.x=20 -- return bar --end local c1 = display.newImage("str-minion-small.png") c1.isVisible=false local c2 = display.newImage("str-minion-mid.png") c2.isVisible=false local c3 = display.newImage("str-minion-big.png") c3.isVisible=false --SPAWNING local function spawnDisk( event ) local phase = event.phase local volumeBar = display.newLine( 0, 0, 1, 0 ) volumeBar.y = 400 volumeBar.x = 20 --volumeBar.isVisible=false local v = 20*math.log(r:getTunerVolume()) local MINTHRESH = 30 local LEFTMARGIN = 20 local v2 = MINTHRESH + math.max (v, -MINTHRESH) v2 = (display.contentWidth - 1 * LEFTMARGIN ) * v2 / MINTHRESH volumeBar.xScale = math.max ( 20, v2 ) local l = volumeBar.xScale local cnt1 = 0 local cnt2 = 0 local cnt3 = 0 local ONE =1 local val = event.numTaps --local px=event.x --local py=event.y if "ended" == phase then --audio.play( popSound ) --myLabel.isVisible = false if l > 50 and l <=150 then --c1:setFillColor(10,105,0) --c1.isVisible=false c1.x=math.random( 10, 450 ) c1.y=math.random( 10, 300 ) physics.addBody( c1, { density=1, radius=10.0 } ) c1.isVisible=true cnt1= cnt1+ ONE return c1 elseif l > 100 and l <=250 then --c2:setFillColor(200,10,0) c2.x=math.random( 10, 450 ) c2.y=math.random( 10, 300 ) physics.addBody( c2, { density=2, radius=9000.0 } ) c2.isVisible=true cnt2= cnt2+ ONE return c2 elseif l >=250 then c3.x=math.random( 40, 450 ) c3.y=math.random( 40, 300 ) physics.addBody( c3, { density=2, radius=7000.0 , bounce=0.0 } ) c3.isVisible=true cnt3= cnt3+ ONE return c3 end end end buzzR:addEventListener( "touch", spawnDisk ) -- touch the screen to create disks Now both functions work fine independently but there is no collision happening. Its almost as if the translating object and the spawn object are on different layers. The translating object passes through the spawn object freely. Can anyone please tell me how to resolve this problem. And how can I get them to collide. Its my first attempt at game development, that too for a mobile platform so would appreciate all help. Also if I have not been specific do let me know. I'll try to frame the query better :). Thanks in advance.

  Read the article

• Career Change Need Advice: Professional Web Developer

  - by bikedorkseattle

  I'm hoping to get some advice here on the steps I should take to make a career change into professional web development. I've been working in cancer research the last 14 years and I need a change. The job market is terrible, the pay is worse, and despite what one would think the atmosphere is generally un-collegial, even in your own group. Venture funding never returned after the dot com burst and with 3 to 5 wars our country is now in, NIH funding is only going to get worse. I know things are not going to get better for my field, sadly, and I know I need to move on. For probably just as long I have fiddled around with web development, I even run a fairly popular site with close to 1 million/month pageviews that pulls a decent income, but not stable enough to live off of right now. My skills are ok for being self taught. I enjoy the fast paced nature of the web and the tools the community creates and how eager people are to help and share knowledge; it's what science should be. I have been trying to find an entry level developer job doing standard HTML/CSS/PHP/MySQL/JS/jQuery type work. A good 50%+ of the jobs want someone with a CS degree, and most want 5 years experience. Having no professional experience and no formal education, I know I'm at a huge disadvantage. I am now considering my options on how to move forward professionally. The way I see it I have basically 3 options. Build up my portfolio of work as much as I can and continue to learn as much as I can on my own. Try to contribute on some open source project when time allows. Network like crazy and go to meetups. Be confident and pray a lot in private. OR While doing above, do some certification programs in PHP and Java, possibly others. Get a Zend Certification. OR Spend a few years getting a CS degree while doing 1. I've already done the work fulltime go to school thing and it doesn't excite me one bit. I didn't have the greatest college experience and am not too eager to return, but I have a family to feed. Is the degree really necessary or is it more of a right of passage type thing in most instances? I appreciate everyones input. Thanks for taking the time to respond.

  Read the article

• Help with Collision of spawned object(postion fixed) with objects that there are translating on screen

  - by Amrutha

  Hey guys I am creating a game using Corona SDK and so coding it in Lua. So there are 2 separate functions, To translate the hit objects and change their color when they are tapped The link below is the code I am using to for the first function http://developer.anscamobile.com/sample-code/fishies Spawn objects that will hit the translating objects on collision. Alos on collision the spawned object disappears and the translating object bears a color(indicating the collision). In addition the size of this spawned object is dependent on i/p volume level. The function I have written is as follows, --VOICE INPUT CODE local r = media.newRecording() r:startRecording() r:startTuner() --local function newBar() -- local bar = display.newLine( 0, 0, 1, 0 ) -- bar:setColor( 0, 55, 100, 20 ) -- bar.width = 5 -- bar.y=400 -- bar.x=20 -- return bar --end local c1 = display.newImage("str-minion-small.png") c1.isVisible=false local c2 = display.newImage("str-minion-mid.png") c2.isVisible=false local c3 = display.newImage("str-minion-big.png") c3.isVisible=false --SPAWNING local function spawnDisk( event ) local phase = event.phase local volumeBar = display.newLine( 0, 0, 1, 0 ) volumeBar.y = 400 volumeBar.x = 20 -- volumeBar.isVisible=false local v = 20*math.log(r:getTunerVolume()) local MINTHRESH = 30 local LEFTMARGIN = 20 local v2 = MINTHRESH + math.max (v, -MINTHRESH) v2 = (display.contentWidth - 1 * LEFTMARGIN ) * v2 / MINTHRESH volumeBar.xScale = math.max ( 20, v2 ) local l = volumeBar.xScale local cnt1 = 0 local cnt2 = 0 local cnt3 = 0 local ONE =1 local val = event.numTaps --local px=event.x --local py=event.y if "ended" == phase then --audio.play( popSound ) --myLabel.isVisible = false if l > 50 and l <=150 then -- c1:setFillColor(10,105,0) -- c1.isVisible=false c1.x=math.random( 10, 450 ) c1.y=math.random( 10, 300 ) physics.addBody( c1, { density=1, radius=10.0 } ) c1.isVisible=true cnt1= cnt1+ ONE return c1 elseif l > 100 and l <=250 then --c2:setFillColor(200,10,0) c2.x=math.random( 10, 450 ) c2.y=math.random( 10, 300 ) physics.addBody( c2, { density=2, radius=9000.0 } ) c2.isVisible=true cnt2= cnt2+ ONE return c2 elseif l >=250 then c3.x=math.random( 40, 450 ) c3.y=math.random( 40, 300 ) physics.addBody( c3, { density=2, radius=7000.0 , bounce=0.0 } ) c3.isVisible=true cnt3= cnt3+ ONE return c3 end end end buzzR:addEventListener( "touch", spawnDisk ) -- touch the screen to create disks Now both functions work fine independently but there is no collision happening. Its almost as if the translating object and the spawn object are on different layers. The translating object passes through the spawn object freely. Can anyone please tell me how to resolve this problem. And how can I get them to collide. Its my first attempt at game development, that too for a mobile platform so would appreciate all help. Also if I have not been specific do let me know. I ll try to frame the query better :). Thanks in advance.

  Read the article

• Big-name School for Undergrad Students

  - by itaiferber

  As a soon-to-be graduating high school senior in the U.S., I'm going to be facing a tough decision in a few months: which college should I go to? Will it be worth it to go to Cornell or Stanford or Carnegie Mellon (assuming I get in, of course) to get a big-name computer science degree, internships, and connections with professors, while taking on massive debt; or am I better off going to SUNY Binghamton (probably the best state school in New York) and still get a pretty decent education while saving myself from over a hundred-thousand dollars worth of debt? Yes, I know questions like this has been asked before (namely here and here), but please bear with me because I haven't found an answer that fits my particular situation. I've read the two linked questions above in depth, but they haven't answered what I want to know: Yes, I understand that going to a big-name college can potentially get me connected with some wonderful professors and leaders in the field, but on average, how does that translate financially? I mean, will good connections pay off so well that I'd be easily getting rid of over a hundred-thousand dollars of debt? And how does the fact that I can get a fifth-years master's degree at Carnegie Mellon play into the equation? Will the higher degree right off the bat help me get a better-paying job just out of college, or will the extra year only put me further into debt? Not having to go to graduate school to get a comparable degree will, of course, be a great financial relief, but will getting it so early give it any greater worth? And if I go to SUNY Binghamton, which is far lesser-known than what I've considered (although if there are any alumni out there who want to share their experience, I would greatly appreciate it), would I be closing off doors that would potentially offset my short-term economic gain with long-term benefits? Essentially, is the short-term benefit overweighed by a potential long-term loss? The answers to these questions all tie in to my final college decision (again, permitting I make it to these schools), so I hope that asking the skilled and knowledgeable people of the field will help me make the right choice (if there is such a thing). Also, please note: I'm in a rather peculiar situation where I can't pay for college without taking out a bunch of loans, but will be getting little to no financial aid (likely federal or otherwise). I don't want to elaborate on this too much (so take it at face value), but this is mainly the reason I'm asking the question. Thanks a lot! It means a lot to me.

  Read the article

• At $20/month Windows Azure host my website with 99.97% uptime

  - by Gopinath

  Couple of years ago a reliable and decent performing Windows hosting was not affordable to many enthusiastic developers who want to try a startup idea or build a hobby site. I tried to start an ASP.NET website few years ago to provide services like – Mobile Tracing, Vehicle Tracing. But due to high cost of Windows hosting I developed those services using PHP (not an easy task for .NET developer) and hosted on them Linux servers.  But with recent evolution of Windows Azure, hosting ASP.NET websites on highly reliable servers is affordable. Today anyone can host a high responsive and available ASP.NET website for just $20/month using Windows Azure. My website coziie.com is running on Windows Azure and serves close to quarter millions visitors a month with 99.97% of uptime and most of the page load times are less than 3 seconds. All I spend to run this website is just around $20, if you translate it to India rupees its roughly Rs.1000. The web sever of coziie.com is powered by a single Extra Small Web role instance and the backend is powered by a SQL Azure instance. Azure is quite impressive to provide 99.97% of uptime. Response times during peak are around 3 seconds and on nomarl loads it is around 1.5 seconds. Here is the report of uptime provided by Royal Pingdom over last one year For just $20/month Windows Azure takes care of the following apart from hosting Patches up Windows OS to the latest version Upgrades ASP.NET to the latest version – coziie.com is running on ASP.NET MVC 3 and soon I’ll upgrade it to ASP.NET MVC 4 Hosts data on latest and best version Sql Server database SQL Azure maintains 3 copies of database and automatically recovers in case of server failures and disasters. I never worry about database backups/restore. Provides staging environment for deploying applications for testing purpose and move them to production – I upgrade  twice a month on average With Windows Azure I no longer focus on server maintenance or data backups. They are taken up by Microsoft team and I just focus on building my website. Wish there is a low cost Linux version of Windows Azure so that I can stop worrying about server maintenance of this blog!! If you are looking for a Windows hosting, look no further than Windows Azure. If you find $20/month is a bit expensive to start with you may explore Azure Website (sort of shared hosted environment) which is free to start with and as your traffic grows you can move to paid hosting.

  Read the article

• Home directory messed up

  - by nuthan

  Recently, I installed Ubuntu 12.04. For some reason, i backed-up my home directory contents to another directory(say bkp dir). Precisely, I moved Documents, Pictures, Downloads, etc.. to bkp directory. Now, Deleted all my original home directory contents. I restored all the bkp directory content back to home. I find them all on my Desktop. I believe some kinda chain is broken. I dont find respective home directories icons on them. How do i restore it? Also, i dont find them in my places options. Messed up image link Thanks... ls -lh ~ ~/Desktop nuthan@nuthan-desktop:~$ ls -lh ~ ~/Desktop /home/nuthan: total 2.8M drwxr-x--- 11 nuthan nuthan 4.0K May 28 20:05 android-sdk-linux drwxrwxr-x 4 nuthan nuthan 4.0K May 25 13:36 android-sdks drwxrwxr-x 2 nuthan nuthan 4.0K May 18 17:30 convert -rw-rw-r-- 1 nuthan nuthan 0 May 30 09:07 dependancies~ drwxr-xr-x 2 nuthan nuthan 4.0K Jun 6 14:16 Desktop drwxrwxrwx 6 nuthan nuthan 4.0K Jun 6 12:06 Documents drwxr-xr-x 28 nuthan nuthan 12K Jun 6 13:52 Downloads drwxrwxr-x 2 nuthan nuthan 4.0K Mar 6 13:23 examples -rw-r--r-- 1 nuthan nuthan 8.3K May 11 16:19 examples.desktop drwxrwxr-x 4 nuthan nuthan 4.0K May 18 19:04 github -rw-rw-r-- 1 nuthan nuthan 0 May 28 18:40 linux~ drwxr-xr-x 2 nuthan nuthan 4.0K May 11 16:46 Music drwxrwxr-x 2 nuthan nuthan 4.0K May 30 08:48 node-code drwxrwxr-x 4 nuthan nuthan 4.0K May 30 08:40 node_modules drwxr-xr-x 7 nuthan nuthan 4.0K May 25 13:55 noduino drwxrwxr-x 2 nuthan nuthan 4.0K May 30 11:58 nuthan drwxrwxrwx 3 nuthan nuthan 4.0K May 24 11:13 Pictures drwxrwxr-x 6 nuthan nuthan 4.0K Mar 6 13:23 public drwxr-xr-x 2 nuthan nuthan 4.0K May 25 11:44 Public drwxrwxr-x 2 nuthan nuthan 4.0K May 29 18:50 python -rw-rw-r-- 1 nuthan nuthan 983K Jun 6 14:16 Screenshot from 2012-06-06 14:16:37.png -rw-rw-r-- 1 nuthan nuthan 980K Jun 6 14:20 Screenshot from 2012-06-06 14:20:24.png -rw-rw-r-- 1 nuthan nuthan 731K Jun 6 14:22 Screenshot from 2012-06-06 14:22:06.png drwxrwxr-x 3 nuthan nuthan 4.0K May 31 18:17 sketchbook drwxrwxr-x 2 nuthan nuthan 4.0K Jun 6 13:05 sql -rw-rw-r-- 1 nuthan nuthan 201 May 28 22:08 sql~ drwxr-xr-x 2 nuthan nuthan 4.0K May 11 16:46 Templates -rw-rw-r-- 1 nuthan nuthan 5.1K Jun 4 12:29 test~ drwxrwxr-x 3 nuthan nuthan 4.0K May 14 11:09 Titanium_Studio drwxrwxr-x 4 nuthan nuthan 4.0K May 14 21:00 Titanium Studio Workspace drwxrwxr-x 4 nuthan nuthan 4.0K Jun 1 18:29 TPM_Trak drwxrwxr-x 2 nuthan nuthan 4.0K May 24 17:30 Ubuntu One drwxr-xr-x 2 nuthan nuthan 4.0K May 11 16:46 Videos drwxrwxr-x 6 nuthan nuthan 4.0K May 31 15:10 workspace drwxrwxr-x 3 nuthan nuthan 4.0K May 14 11:57 Zend /home/nuthan/Desktop: total 20K -rw-rw-r-- 1 nuthan nuthan 441 May 30 09:07 dependancies -rw-rw-r-- 1 nuthan nuthan 1.6K May 28 18:40 linux -rw-rw-r-- 1 nuthan nuthan 470 May 28 22:16 sql -rw-rw-r-- 1 nuthan nuthan 5.1K Jun 4 19:34 test nuthan@nuthan-desktop:~$

  Read the article

• How to run software, that is not offered though package managers, that requires ia32-libs

  - by Onno

  I'm trying to install the Arma 2 OA dedicated server on a Virtualbox VM so I can test my own missions in a sandbox environment in a way that lets me offload them to another computer in my network. (The other computer is running the VM, but it's a windows machine, and I didn't want to hassle with its installation) It needs at least 2, and preferably 4GB of ram, so I thought I would install the AMD64 version of ubuntu 13.10 to get this going. 'How do you run a 32-bit program on a 64-bit version of Ubuntu?' already explained how to install 32bit software though apt-get and/or dpkg, but that doesn't apply in this case. The server is offered as a compressed download on the site of BI Studio, the developer of the Arma games. Its installation instructions are obviously slightly out of date with the current state of the art. (probably because the state of the art has been updated quite recently :) ) It states that I have to install ia32-libs, which has now apparently been deprecated. Now I have to find out how to get the right packages installed to make sure that it will run. My experience level is like novice-intermediate when it comes to these issues. I've installed a lot of packages though apt-get; I've solved dependency issues in the past; I haven't installed much software without using package managers. I can handle myself with basic administrative work like editing conf files and such. I have just gone ahead and tried to install it without installing ia32-libs through apt-get but to install gcc to get the libs after all. My reasoning being that gcc will include the files for backward compatibility coding and on linux all libs are (as far as I can tell) installed at a system level in /libs . So far it seems to start up. (I can connect with the game server trough my in-game network browser, so it's communicating) I'm not sure if there's any dependency checking going on when running the game server program, so I'm left with a couple of questions: Does 13.10 catch any calls to ia32libs libraries and translate the calls to the right code on amd64? If it runs, does that mean that all required libraries have been loaded correctly, or is there a change of it crashing later on when a library that was needed is missing after all? Is it necessary to do a workaround such as installing gcc? How do I find out what libraries I might need to run this software? (or any other piece of 32-bit software that isn't offered through a package manager)

  Read the article

• Do I need to go to a big-name university?

  - by itaiferber

  As a soon-to-be graduating high school senior in the U.S., I'm going to be facing a tough decision in a few months: which college should I go to? Will it be worth it to go to Cornell or Stanford or Carnegie Mellon (assuming I get in, of course) to get a big-name computer science degree, internships, and connections with professors, while taking on massive debt; or am I better off going to SUNY Binghamton (probably the best state school in New York) and still get a pretty decent education while saving myself from over a hundred-thousand dollars worth of debt? Yes, I know questions like this has been asked before (namely here and here), but please bear with me because I haven't found an answer that fits my particular situation. I've read the two linked questions above in depth, but they haven't answered what I want to know: Yes, I understand that going to a big-name college can potentially get me connected with some wonderful professors and leaders in the field, but on average, how does that translate financially? I mean, will good connections pay off so well that I'd be easily getting rid of over a hundred-thousand dollars of debt? And how does the fact that I can get a fifth-years master's degree at Carnegie Mellon play into the equation? Will the higher degree right off the bat help me get a better-paying job just out of college, or will the extra year only put me further into debt? Not having to go to graduate school to get a comparable degree will, of course, be a great financial relief, but will getting it so early give it any greater worth? And if I go to SUNY Binghamton, which is far lesser-known than what I've considered (although if there are any alumni out there who want to share their experience, I would greatly appreciate it), would I be closing off doors that would potentially offset my short-term economic gain with long-term benefits? Essentially, is the short-term benefit overweighed by a potential long-term loss? The answers to these questions all tie in to my final college decision (again, permitting I make it to these schools), so I hope that asking the skilled and knowledgeable people of the field will help me make the right choice (if there is such a thing). Also, please note: I'm in a rather peculiar situation where I can't pay for college without taking out a bunch of loans, but will be getting little to no financial aid (likely federal or otherwise). I don't want to elaborate on this too much (so take it at face value), but this is mainly the reason I'm asking the question. Thanks a lot! It means a lot to me.

  Read the article

• Rotate camera around player and set new forward directions

  - by Samurai Fox

  I have a 3rd person camera which can rotate around the player. When I look at the back of the player and press forward, player goes forward. Then I rotate 360 around the player and "forward direction" is tilted for 90 degrees. So every 360 turn there is 90 degrees of direction change. For example when camera is facing the right side of the player, when I press button to move forward, I want player to turn to the left and make that the "new forward". I have Player object with Camera as child object. Camera object has Camera script. Inside Camera script there are Player and Camera classes. Player object itself, has Input Controller. Also I'm making this script for joystick/ controller primarily. My camera script so far: using UnityEngine; using System.Collections; public class CameraScript : MonoBehaviour { public GameObject Target; public float RotateSpeed = 10, FollowDistance = 20, FollowHeight = 10; float RotateSpeedPerTime, DesiredRotationAngle, DesiredHeight, CurrentRotationAngle, CurrentHeight, Yaw, Pitch; Quaternion CurrentRotation; void LateUpdate() { RotateSpeedPerTime = RotateSpeed * Time.deltaTime; DesiredRotationAngle = Target.transform.eulerAngles.y; DesiredHeight = Target.transform.position.y + FollowHeight; CurrentRotationAngle = transform.eulerAngles.y; CurrentHeight = transform.position.y; CurrentRotationAngle = Mathf.LerpAngle(CurrentRotationAngle, DesiredRotationAngle, 0); CurrentHeight = Mathf.Lerp(CurrentHeight, DesiredHeight, 0); CurrentRotation = Quaternion.Euler(0, CurrentRotationAngle, 0); transform.position = Target.transform.position; transform.position -= CurrentRotation * Vector3.forward * FollowDistance; transform.position = new Vector3(transform.position.x, CurrentHeight, transform.position.z); Yaw = Input.GetAxis("Right Horizontal") * RotateSpeedPerTime; Pitch = Input.GetAxis("Right Vertical") * RotateSpeedPerTime; transform.Translate(new Vector3(Yaw, -Pitch, 0)); transform.position = new Vector3(transform.position.x, transform.position.y, transform.position.z); transform.LookAt(Target.transform); } }

  Read the article

• Career advice: stay with PHP or start a new career in something else ( .Net?)

  - by Christian P

  I'm planning on moving to NY in 6-12 months tops, so I'm forced to find a new job. When I'm planing to start my life in another city it's also probably a good time to think about career changes. I've found a lot of different opinions about PHP vs .Net vs Java and this is not topic here. I don't want to start a new fight about which language is better. Knowing programming language is not the most important thing for being a software developer. To be a really good developer you need to know OOP, design patterns, testing... and language is just a tool to make things happen. So back to my question. I have mixed experience in IT - 1 year as an IT support guy (Windows administration and support), around 2 years of experience in embedded programming (VB.Net 2005) and for the last 2 years I'm working with PHP/MySQL. I have worked with Magento web shop, assisted in some projects in Symfony, modified few Drupal sites. My main concerns are following: Do I continue to improve my skills in PHP e.g. to start learning some major PHP framework like Zend, Symfony maybe get some PHP certification. Or do I start learning .NET or Java. I'm more familiar to .NET so I'll probably choose it if choice falls between .NET and Java ( or you could convince me to choose Java :). Career-wise, I don't know what is the best choice. Learning new framework and language is more time consuming then improving my existing skills in PHP. But with .NET you have a lot of possibilities (Windows 7 Phone development, Silverlight, WPF) and possibly bigger chances to find better jobs. PHP jobs are less payed then .NET, at least, according to my researches (correct me if I'm wrong). But if I start now with .NET I'm just a beginner and my salary will be low. I need at least 2+ years of experience in some language to even try to find some job that is paying higher than $50-60k in NY. My main goal in next 2-3 years is to try to find a job in a $60-80k category. Don't get me wrong, I'm not just chasing money, but money is an important factor when you're trying to start a family. I'm 27 years old and I feel that there isn't a lot of room for wrong decisions regarding my career, so any advice will be very welcome. Update Thank you all for spending time to help me with my problem. All of the answers and comments have been very helpful. I have decided to stick with PHP but also to learn C# and Silverlight 4. We'll see where the life will take me.

  Read the article

• Ray Picking Problems

  - by A Name I Haven't Decided On

  I've read so many answers on here about how to do Ray Picking, that I thought I had the idea of it down. But when I try to implement it in my game, I get garbage. I'm working with LWJGL. Here's the code: public static Ray getPick(int mouseX, int mouseY){ glPushMatrix(); //Setting up the Mouse Clip Vector4f mouseClip = new Vector4f((float)mouseX * 2 / 960f - 1, 1 - (float)mouseY * 2 / 640f ,0 ,1); //Loading Matrices FloatBuffer modMatrix = BufferUtils.createFloatBuffer(16); FloatBuffer projMatrix = BufferUtils.createFloatBuffer(16); glGetFloat(GL_MODELVIEW_MATRIX, modMatrix); glGetFloat(GL_PROJECTION_MATRIX, projMatrix); //Assigning Matrices Matrix4f proj = new Matrix4f(); Matrix4f model = new Matrix4f(); model.load(modMatrix); proj.load(projMatrix); //Multiplying the Projection Matrix by the Model View Matrix Matrix4f tempView = new Matrix4f(); Matrix4f.mul(proj, model, tempView); tempView.invert(); //Getting the Camera Position in World Space. The 4th Column of the Model View Matrix. model.invert(); Point cameraPos = new Point(model.m30, model.m31, model.m32); //Theoretically getting the vector the Picking Ray goes Vector4f rayVector = new Vector4f(); Matrix4f.transform(tempView, mouseClip, rayVector); rayVector.translate((float)-cameraPos.getX(),(float) -cameraPos.getY(),(float) -cameraPos.getZ(), 0f); rayVector.normalise(); glPopMatrix(); //This Basically Spits out a value that changes as the Camera moves. //When the Mouse moves, the values change around 0.001 points from screen edge to edge. System.out.format("Vector: %f %f %f%n", rayVector.x, rayVector.y, rayVector.z); //return new Ray(cameraPos, rayVector); return null; } I don't really know why this isn't working. I was hoping some more experienced eyes might be able to help me out. I can get the camera position like a champ, it's the vector the rays going in that I can't seem to get right. Thanks.

  Read the article

• How to make an object move again after being stopped by collision in Unity?

  - by Matthew Underwood

  I have a player object which position is always centered on the main camera's viewport. This object has a Rigidbody 2D, a box and circle collider. The player moves around a level, the level has a polygon collider attached. I move the camera until the object hits against the collider, which stops the movement of the camera by setting its speed to 0. The problem happens when I want to move the camera / player object away from the collider. As the speed is already at 0, it cannot move away from the collider. The script attached to the player object, checks for collisions and applies the speed to 0 on the main camera's test script. using UnityEngine; using System.Collections; public class move : MonoBehaviour { public float speed; public test testing; // Use this for initialization void Start () { speed = 10F; testing = Camera.main.GetComponent<test>(); } // Update is called once per frame void FixedUpdate () { Vector3 p = Camera.main.ViewportToWorldPoint(new Vector3(0.5F, 0.5F, Camera.main.nearClipPlane)); transform.position = new Vector3(p.x, p.y, -1); } void OnCollisionEnter2D(Collision2D col) { testing.speed = 0; } void OnCollisionExit2D(Collision2D col) { testing.speed = 10F; } } This is the script attached to the main camera; just a simple script that changes the camera's position. using UnityEngine; using System.Collections; public class test : MonoBehaviour { public float speed; public float translationY; public float translationX; // Use this for initialization void Start () { speed = 10F; } void FixedUpdate () { translationY = Input.GetAxis("Vertical") * speed * Time.deltaTime; translationX = Input.GetAxis("Horizontal") * speed * Time.deltaTime; transform.Translate(translationX, translationY, 0); } } The player object isn't kinematic and is a fixed angle, the colliders aren't triggers and the polygon collider isn't a trigger either. The player is the red square, the collider is the pink area. -- EDIT -- From the latest change the collider set up for the player So if the X speed was disabled. It wouldnt move into the side of the polygon colider which is good, but yet you couldnt move away from it. And moving down would move inside the colider.

  Read the article

• Powerful Lessons in Data from the Presidential Election

  - by Christina McKeon

  Now that we’ve had a few days to recover from the U.S. presidential election, it’s a good time to take a step back from politics and look for the customer experience lessons that we can take away. The most powerful lesson is that when you know more about your base, you will have an advantage over your competition. That advantage will translate into you winning and your competition losing. Michael Scherer of TIME was given access to Obama’s data analysts two days before the election. His account is documented in Inside the Secret World of the Data Crunchers Who Helped Obama Win. What we learned from Scherer’s inside view is how well Obama’s team did in getting the right data, analyzing it, and acting on it. This data team recognized how critical it was to break down data silos within the campaign. As Scherer noted, they created “a single system that merged information from pollsters, fundraisers, field workers, consumer databases, and social-media and mobile contacts with the main Democratic voter files in the swing states.” The Obama analysis was so meticulous that they knew which celebrity and which type of celebrity event would help them maximize campaign contributions. With a single system, their data models became more precise. They determined which messages were more successful with specific demographic groups and that who made the calls mattered. Data analysis also led to many other changes in Obama’s campaign including a new ad buying strategy, using social media and applications to tap into supporters’ friends, and using new social news sites. While we did not have that same inside view into Romney’s campaign, much of the post-mortem coverage indicates that Romney’s team did not have the right analysis. As Peter Hamby of CNN wrote in Analysis: Why Romney Lost, “Romney officials had modeled an electorate that looked something like a mix of 2004 and 2008….” That historical data did not account for the changing demographics in the U.S. Does your organization approach data like the Obama or Romney team? Do you really know your base? How well can you predict what is going to happen in your business? If you haven’t already put together a strategy and plan to know more, this week’s civics lesson is a powerful reason to do it sooner rather than later. Your competitors are probably thinking the same thing that you are!

  Read the article

• Our own Daily WTF

  - by Dennis Vroegop

  Originally posted on: http://geekswithblogs.net/dvroegop/archive/2014/08/20/our-own-daily-wtf.aspxIf you're a developer, you've probably heard of the website the DailyWTF. If you haven't, head on over to http://www.thedailywtf.com and read. And laugh. I'll wait. Read it? Good. If you're a bit like me probably you've been wondering how on earth some people ever get hired as a software engineer. Most of the stories there seem to weird to be true: no developer would write software like that right? And then you run into a little nugget of code one of your co-workers wrote. And then you realize: "Hey, it happens everywhere!" Look at this piece of art I found in our codebase recently: public static decimal ToDecimal(this string input) {     System.Globalization.CultureInfo cultureInfo = System.Globalization.CultureInfo.InstalledUICulture;     var numberFormatInfo = (System.Globalization.NumberFormatInfo)cultureInfo.NumberFormat.Clone();     int dotIndex = input.IndexOf(".");     int commaIndex = input.IndexOf(",");     if (dotIndex > commaIndex)         numberFormatInfo.NumberDecimalSeparator = ".";     else if (commaIndex > dotIndex)         numberFormatInfo.NumberDecimalSeparator = ",";     decimal result;     if (decimal.TryParse(input, System.Globalization.NumberStyles.Float, numberFormatInfo, out result))         return result;     else         throw new Exception(string.Format("Invalid input for decimal parsing: {0}. Decimal separator: {1}.", input, numberFormatInfo.NumberDecimalSeparator)); }  Me and a collegue have been looking long and hard at this and what we concluded was the following: Apparently, we don't trust our users to be able to correctly set the culture in Windows. Users aren't able to determine if they should tell Windows to use a decimal point or a comma to display numbers. So what we've done here is make sure that whatever the user enters, we'll translate that into whatever the user WANTS to enter instead of what he actually did. So if you set your locale to US, since you're a US citizen, but you want to enter the number 12.34 in the Dutch style (because, you know, the Dutch are way cooler with numbers) so you enter 12,34 we will understand this and respect your wishes! Of course, if you change your mind and in the next input field you decide to use the decimal dot again, that's fine with us as well. We will do the hard work. Now, I am all for smart software. Software that can handle all sorts of input the user can think of. But this feels a little uhm, I don't know.. wrong.. Or am I too old fashioned?

  Read the article

• Help with calculation to steer ship in 3d space

  - by Aaron Anodide

  I'm a beginner using XNA to try and make a 3D Asteroids game. I'm really close to having my space ship drive around as if it had thrusters for pitch and yaw. The problem is I can't quite figure out how to translate the rotations, for instance, when I pitch forward 45 degrees and then start to turn - in this case there should be rotation being applied to all three directions to get the "diagonal yaw" - right? I thought I had it right with the calculations below, but they cause a partly pitched forward ship to wobble instead of turn.... :( Here's current (almost working) calculations for the Rotation acceleration: float accel = .75f; // Thrust +Y / Forward if (currentKeyboardState.IsKeyDown(Keys.I)) { this.ship.AccelerationY += (float)Math.Cos(this.ship.RotationZ) * accel; this.ship.AccelerationX += (float)Math.Sin(this.ship.RotationZ) * -accel; this.ship.AccelerationZ += (float)Math.Sin(this.ship.RotationX) * accel; } // Rotation +Z / Yaw if (currentKeyboardState.IsKeyDown(Keys.J)) { this.ship.RotationAccelerationZ += (float)Math.Cos(this.ship.RotationX) * accel; this.ship.RotationAccelerationY += (float)Math.Sin(this.ship.RotationX) * accel; this.ship.RotationAccelerationX += (float)Math.Sin(this.ship.RotationY) * accel; } // Rotation -Z / Yaw if (currentKeyboardState.IsKeyDown(Keys.K)) { this.ship.RotationAccelerationZ += (float)Math.Cos(this.ship.RotationX) * -accel; this.ship.RotationAccelerationY += (float)Math.Sin(this.ship.RotationX) * -accel; this.ship.RotationAccelerationX += (float)Math.Sin(this.ship.RotationY) * -accel; } // Rotation +X / Pitch if (currentKeyboardState.IsKeyDown(Keys.F)) { this.ship.RotationAccelerationX += accel; } // Rotation -X / Pitch if (currentKeyboardState.IsKeyDown(Keys.D)) { this.ship.RotationAccelerationX -= accel; } I'm combining that with drawing code that does a rotation to the model: public void Draw(Matrix world, Matrix view, Matrix projection, TimeSpan elsapsedTime) { float seconds = (float)elsapsedTime.TotalSeconds; // update velocity based on acceleration this.VelocityX += this.AccelerationX * seconds; this.VelocityY += this.AccelerationY * seconds; this.VelocityZ += this.AccelerationZ * seconds; // update position based on velocity this.PositionX += this.VelocityX * seconds; this.PositionY += this.VelocityY * seconds; this.PositionZ += this.VelocityZ * seconds; // update rotational velocity based on rotational acceleration this.RotationVelocityX += this.RotationAccelerationX * seconds; this.RotationVelocityY += this.RotationAccelerationY * seconds; this.RotationVelocityZ += this.RotationAccelerationZ * seconds; // update rotation based on rotational velocity this.RotationX += this.RotationVelocityX * seconds; this.RotationY += this.RotationVelocityY * seconds; this.RotationZ += this.RotationVelocityZ * seconds; Matrix translation = Matrix.CreateTranslation(PositionX, PositionY, PositionZ); Matrix rotation = Matrix.CreateRotationX(RotationX) * Matrix.CreateRotationY(RotationY) * Matrix.CreateRotationZ(RotationZ); model.Root.Transform = rotation * translation * world; model.CopyAbsoluteBoneTransformsTo(boneTransforms); foreach (ModelMesh mesh in model.Meshes) { foreach (BasicEffect effect in mesh.Effects) { effect.World = boneTransforms[mesh.ParentBone.Index]; effect.View = view; effect.Projection = projection; effect.EnableDefaultLighting(); } mesh.Draw(); } }

  Read the article

• How to snap a 2D Quad to the mouse cursor using OpenGL 3.0/WIN32?

  - by NoobScratcher

  I've been having issues trying to snap a 2D Quad to the mouse cursor position I'm able : 1.) To get values into posX, posY, posZ 2.) Translate with the values from those 3 variables But the quad positioning I'm not able to do correctly in such a way that the 2D Quad is near the mouse cursor using those values from those 3 variables eg."posX, posY, posZ" I need the mouse cursor in the center of the 2D Quad. I'm hoping someone can help me achieve this. I've tried searching around with no avail. Heres the function that is ment to do the snapping but instead creates weird flicker or shows nothing at all only the 3d models show up : void display() { glClearColor(0.0,0.0,0.0,1.0); glClear(GL_COLOR_BUFFER_BIT|GL_DEPTH_BUFFER_BIT); for(std::vector<GLuint>::iterator I = cube.begin(); I != cube.end(); ++I) { glCallList(*I); } if(DrawArea == true) { glReadPixels(winX, winY, 1, 1, GL_DEPTH_COMPONENT, GL_FLOAT, &winZ); cerr << winZ << endl; glGetDoublev(GL_MODELVIEW_MATRIX, modelview); glGetDoublev(GL_PROJECTION_MATRIX, projection); glGetIntegerv(GL_VIEWPORT, viewport); gluUnProject(winX, winY, winZ , modelview, projection, viewport, &posX, &posY, & posZ); glBindTexture(GL_TEXTURE_2D, DrawAreaTexture); glPixelStorei(GL_UNPACK_ALIGNMENT, 1); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST); glTexEnvf(GL_TEXTURE_ENV, GL_TEXTURE_ENV_MODE, GL_DECAL); glTexImage2D (GL_TEXTURE_2D, 0, GL_RGB, DrawAreaSurface->w, DrawAreaSurface->h, 0, GL_RGBA, GL_UNSIGNED_BYTE, DrawAreaSurface->pixels); glEnable(GL_TEXTURE_2D); glBindTexture(GL_TEXTURE_2D, DrawAreaTexture); glTranslatef(posX , posY, posZ); glBegin(GL_QUADS); glTexCoord2f (0.0, 0.0); glVertex3f(0.5, 0.5, 0); glTexCoord2f (1.0, 0.0); glVertex3f(0, 0.5, 0); glTexCoord2f (1.0, 1.0); glVertex3f(0, 0, 0); glTexCoord2f (0.0, 1.0); glVertex3f(0.5, 0, 0); glEnd(); } SwapBuffers(hDC); } I'm using : OpenGL 3.0 WIN32 API C++ GLSL if you really want the full source here it is - http://pastebin.com/1Ncm9HNf , Its pretty messy.

  Read the article

• rotating spheres

  - by Dave

  I want to continuously rotate 2 spheres, however the rotation does not seem to work. Here is my code: float angle = 0.0f; void light(){ glEnable(GL_LIGHTING); glEnable(GL_LIGHT0); glEnable(GL_LIGHT1); // Create light components GLfloat positionlight1[] = { 9.0, 5.0, 1.0, 0.0 }; GLfloat positionlight2[] = {0.2,2.5,1.3,0.0}; GLfloat light_ambient1[] = { 0.0, 0.0, 1.0, 1.0}; GLfloat light_diffuse[] = { 1.0, 1.0, 1.0, 1.0 }; glLightfv(GL_LIGHT0, GL_AMBIENT, light_ambient1); glLightfv(GL_LIGHT1, GL_DIFFUSE, light_diffuse); glLightfv(GL_LIGHT0, GL_POSITION, positionlight1); glLightfv(GL_LIGHT1, GL_POSITION, positionlight2); } void changeSize(int w, int h) { if (h==0) // Prevent A Divide By Zero By { h=1; // Making Height Equal One } glMatrixMode(GL_PROJECTION); // Select The Projection Matrix glLoadIdentity(); // Reset The Projection Matrix glViewport(0,0,w,h);// Reset The Current Viewport // Calculate The Aspect Ratio Of The Window gluPerspective(45.0f,(GLfloat)w/(GLfloat)h,0.1f,100.0f); glMatrixMode(GL_MODELVIEW); // Select The Modelview Matrix // Reset The Modelview Matrix } void renderScene(void) { glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); glPushMatrix(); //set where to start the current object glTranslatef(0.0,1.2,-6); glRotatef(angle,0,1.2,-6); glutSolidSphere(1,50,50); glPopMatrix(); //end the current object transformations glPushMatrix(); //set where to start the current object glTranslatef(0.0,-2,-6); glRotatef(angle,0,-2,-6); glutSolidSphere(0.5,50,50); glPopMatrix(); //end the current object transformations angle=+0.1; glutSwapBuffers(); } int main(int argc, char **argv) { // init GLUT and create window glutInit(&argc, argv); glutInitDisplayMode(GLUT_DEPTH | GLUT_DOUBLE | GLUT_RGBA); glutInitWindowPosition(100,100); glutInitWindowSize(500,500); glutCreateWindow("Hello World"); // register callbacks light(); glutDisplayFunc(renderScene); glutReshapeFunc(changeSize); glutIdleFunc(renderScene); // enter GLUT event processing loop glutMainLoop(); return 1; } Graphicstest::Graphicstest(void) { } In the renderscene where i draw,translate and rotate my 2 spheres. It does not seem to rotate the spheres continuously. What am i doing wrong?

  Read the article

• Encapsulating code in F# (Part 1)

  - by MarkPearl

  I have been looking at F# for a while now and seem a few really interesting samples and snippets on howto’s. This has been great to see the basic outline of the language and the possibilities, however a nagging question in the back of my mind has been what does an F# project look like? How do I code group code in F# so that it can be modularized and brought in and out of a project easily? My Expert F# book has an entire chapter (7) dedicated to this and after browsing the other chapters of the book I decided that this topic was something I really wanted to know more about now! Because of my C# background I keep trying to think in F# of objects. So to try and get a clearer idea of how to do things the F# way I am first going to take a very simplified C# example and try to “translate” it. using System; namespace ConsoleApplication1 { namespace ExampleOfEncapsulationInCSharp { class Program { static void EncapsulatedVariableInAMethod() { int count = 10; Console.WriteLine(count); } static void Main(string[] args) { EncapsulatedVariableInAMethod(); Console.ReadLine(); } } } } From the above example the count integer is encapsulated within EncapsulatedVariableInAMethod method. You couldn’t access the count variable from outside the scope of its parent method but have full access to it within the method. Lets look at my F# equivalent… open System let EncapsulatedVariableInAMethod = let count = 10 Console.WriteLine(count) () EncapsulatedVariableInAMethod Console.ReadLine()   Now, when I first attempted to write the F# code I got stuck… I didn’t have the Console.WriteLine calls but had the following… open System let EncapsulatedVariableInAMethod = let count = 10 EncapsulatedVariableInAMethod Console.ReadLine()   The compiler didn’t like the let before the count = 10. This is because every F# expression must evaluate to a value. If I did not want to make the Console call, I would still need to evaluate the expression to something – and for this reason the Unit Type is provided. I could have done something like…. open System let EncapsulatedVariableInAMethod = let count = 10 () EncapsulatedVariableInAMethod Console.ReadLine()   Which the compiler would be happy with…

  Read the article

• Response: Agile's Second Chasm

  - by Malcolm Anderson

  William Pietri over at Agile Focus has written an interesting article entitled, "Agile’s Second Chasm (and how we fell in)" in which he talks about how agile development has fallen into a common trap where large companies are now spending a lot of money hiring agile (Scrum) consultants just so that they can say they are agile, but all the while avoiding any change that is required by Scrum.   It echoes the questions that I've been asking for a while, "Can a fortune 500 company actually do agile development?"  I'm starting to think that the answer is "usually not"   William ask 3 questions at the end of his article that I will answer here.   1) Have I seen agile development brought in and then preemptively customized (read: made into ScrummerFall)?   Yes, Scrum is hard and disruptive.  It's a spotlight on company dysfunction.  In a low trust environment like most fortune 500 companies Scrum will be subverted by anyone who has ever seen "transparency" translate into someone being laid off.   2) If I had to do it all over again, would I change anything?  No, this is a natural progression, but the agile principles are powerful enough, that the companies that don't adopt them will no longer be competitive and will start to fail.   3) Is this situation solvable?  I think it is.  I think that one of the issues is that you often see companies implementing Scrum, but avoiding the agile engineering practices.  I believe that you cannot do one without the other.  Scrum keeps the ship sailing in smooth deep waters.  The agile engineering practices keep the engine running smoothly and cleanly.  If you implement agile engineering practices without Scrum, you run the risk of ending up with a great running piece of software that is useful to no one.  On the other hand, implementing cargo-cult Scrum without the agile engineering practices and you end up (especially in a fortune 500 company) being steered in the right direction, but with your development practices coming to a dead halt because you have code that can not keep up with the changes in requirements.   If you are trying to do Scrum, make sure that you hire some agile engineering coaches, or else you may find your deveolpment engines grinding to a dead halt in the middle of the open ocean.

  Read the article

< Previous Page | 98 99 100 101 102 103 104 105 106 107 108 109  | Next Page >