Search Results

Search found 19000 results on 760 pages for 'boot tool'.

Page 103/760 | < Previous Page | 99 100 101 102 103 104 105 106 107 108 109 110  | Next Page >

  • Getting Grub2 to recognize a Raid 10 boot/root

    - by xenoterracide
    I've been trying to get my raid to boot from grub2 for about 2 days now and I don't seem to be getting closer. The problem appears to be that it doesn't recognize my raid at all. It doesn't see (md0) etc. I'm not sure Why or how to change this. I'm using mdadm, 2 device (essentially a raid1) raid10,f2, which is currently degraded. I have tried adding the raid and mdraid modules with grub install along with others. I've tried several variation on grub-install such as grub-install --debug --no-floppy --modules="biosdisk part_msdos chain raid mdraid ext2 linux search ata normal" /dev/md0 I've been searching the net for an answer to what I haven't done but no luck. On my other drive which I plan on removing the raid is initialized and mounted fine on boot, but it's not the boot/root for that setup. My grub.cfg isn't recognized by grub since it can't read the raid partition so I'm not posting that. md0 is not listed in my /boot/grub/device.map.

    Read the article

  • CentOS OpenVZ fail to boot after kernel update

    - by SkechBoy
    After upgrading to latest OpenVZ kernel CentOS server won't boot. When i try go boot the latest kernel server is stuck at this point: (note that images are taken from virtual kvm) http://i.stack.imgur.com/4lusz.jpg Then i try to start the server on some old kernels and than i get this error message: kernel panic - not syncing - attempted to kill init better shown on this image: http://i.stack.imgur.com/2SReF.jpg Here is some useful information fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 2995.7 GB, 2995739688960 bytes 255 heads, 63 sectors/track, 364211 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0004c4e4 Device Boot Start End Blocks Id System /dev/sda1 1 523 4199044+ 82 Linux swap / Solaris /dev/sda2 524 785 2104515 83 Linux /dev/sda3 786 261869 2097157230 83 Linux /dev/sda4 261870 364211 822062115 83 Linux /etc/fstab proc /proc proc defaults 0 0 none /dev/pts devpts gid=5,mode=620 0 0 /dev/sda1 none swap sw 0 0 /dev/sda2 /boot ext3 defaults 0 0 /dev/sda3 / ext3 defaults 0 0 /dev/sda4 /home ext3 defaults 0 0 and grub config file: title OpenVZ (2.6.18-274.18.1.el5.028stab098.1) root (hd0,1) kernel /vmlinuz-2.6.18-274.18.1.el5.028stab098.1 ro root=/dev/sda3 vga=0x317 selinux=0 initrd /initrd-2.6.18-274.18.1.el5.028stab098.1.img title OpenVZ (2.6.18-274.7.1.el5.028stab095.1) root (hd0,1) kernel /vmlinuz-2.6.18-274.7.1.el5.028stab095.1 ro root=/dev/sda3 vga=0x317 selinux=0 initrd /initrd-2.6.18-274.7.1.el5.028stab095.1.img title OpenVZ (2.6.18-194.8.1.el5.028stab070.4) root (hd0,1) kernel /vmlinuz-2.6.18-194.8.1.el5.028stab070.4 ro root=/dev/sda3 vga=0x317 initrd /initrd-2.6.18-194.8.1.el5.028stab070.4.img Any help is greatly appreciated Thanks.

    Read the article

  • ESXi 5 Guests will not boot

    - by Adrian
    I have a problem with Guests not booting under VMWare ESXi 5.0 on my IBM x3550M3 server. Note: Investigation eventually determined that problem was with the VMware client on a Lenovo Edge laptop, the only Windows box available in a Linux IT shop. vSphere Client v4 and v5 duplicated behavior on the Lenovo Edge. As indicated in the comment to the accepted answer, replacing the workstation with one using different video was the "fix" for this particular issue. The ESXi host boots just fine. The Client connects just fine. Guests can be configured but do not successfully boot. The initial guest memory consumption jumps up to 560MB and drops down to 40MB after a few seconds. Initial CPU usage is 1 full CPU (3000Ghz per the chart) and immediately drops downm to 29Mhz. Guests do not display any output in the Console tab but show a state of 'Powered On'. No errors in the Events tab. Switching Guest from BIOS to EFI makes no difference. VMs are listed as Version 7 and the behavior is duplicated across all availabled Guest OS flavors. Problem also duplicated when server is booted up in Legacy Only mode. Logs do not contain anything particularly suspicious. Edit: No firewalls, routers, or VLANs in between the client and server. Edit 2: We have tried to Boot Guest into BIOS screen at Next Boot checkbox in the Guest Setting. Was not successful. Edit 3: 500GB datastore with 1 40GB VM on it. Plenty of space. Edit 4: Guests copied from my old ESXi 4 server DO NOT boot on the ESXi 5 system. Initially it complains about too little Video RAM being configured for the default 2500x1600, but it still doesn't work properly even after I bump the Video RAM settings or switch it to Auto-Detect.

    Read the article

  • Blank Screen at boot Ubuntu 12.04 - nvidia-current - Macbook Air 3,2

    - by soulnafein
    I've installed nvidia-current using the Additional Drivers application in Ubuntu 12.04. I need those drivers so I can use accelerated WebGL. After installing the drivers, and rebooting X fails to start and I have a frozen system/dark screen. Below is the content of Xorg.0.log How can I fix this problem? [ 4.666] X.Org X Server 1.11.3 Release Date: 2011-12-16 [ 4.666] X Protocol Version 11, Revision 0 [ 4.666] Build Operating System: Linux 2.6.42-23-generic x86_64 Ubuntu [ 4.666] Current Operating System: Linux david-macbook-air 3.2.0-34-generic #53-Ubuntu SMP Thu Nov 15 10:48:16 UTC 2012 x86_64 [ 4.666] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-34-generic root=UUID=b3d5ae2a-72af-4ef9-b775-0d40b5f80f9b ro quiet splash vt.handoff=7 [ 4.666] Build Date: 29 August 2012 12:12:33AM [ 4.666] xorg-server 2:1.11.4-0ubuntu10.8 (For technical support please see http://www.ubuntu.com/support) [ 4.666] Current version of pixman: 0.24.4 [ 4.666] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 4.666] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 4.666] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 13 10:18:02 2012 [ 4.668] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 4.668] (==) No Layout section. Using the first Screen section. [ 4.668] (==) No screen section available. Using defaults. [ 4.668] (**) |-->Screen "Default Screen Section" (0) [ 4.668] (**) | |-->Monitor "<default monitor>" [ 4.668] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 4.668] (==) Automatically adding devices [ 4.668] (==) Automatically enabling devices [ 4.668] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 4.668] Entry deleted from font path. [ 4.668] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 4.668] Entry deleted from font path. [ 4.669] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 4.669] Entry deleted from font path. [ 4.669] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 4.669] Entry deleted from font path. [ 4.669] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 4.669] Entry deleted from font path. [ 4.669] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist. [ 4.669] Entry deleted from font path. [ 4.669] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, built-ins [ 4.669] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" [ 4.669] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 4.669] (II) Loader magic: 0x7f6222467b00 [ 4.669] (II) Module ABI versions: [ 4.669] X.Org ANSI C Emulation: 0.4 [ 4.669] X.Org Video Driver: 11.0 [ 4.669] X.Org XInput driver : 16.0 [ 4.669] X.Org Server Extension : 6.0 [ 4.670] (--) PCI:*(0:2:0:0) 10de:08a3:106b:00d3 rev 162, Mem @ 0x92000000/16777216, 0x80000000/268435456, 0x90000000/33554432, I/O @ 0x00001000/128, BIOS @ 0x????????/131072 [ 4.670] (II) Open ACPI successful (/var/run/acpid.socket) [ 4.670] (II) LoadModule: "extmod" [ 4.671] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so [ 4.671] (II) Module extmod: vendor="X.Org Foundation" [ 4.671] compiled for 1.11.3, module version = 1.0.0 [ 4.671] Module class: X.Org Server Extension [ 4.671] ABI class: X.Org Server Extension, version 6.0 [ 4.671] (II) Loading extension MIT-SCREEN-SAVER [ 4.671] (II) Loading extension XFree86-VidModeExtension [ 4.671] (II) Loading extension XFree86-DGA [ 4.671] (II) Loading extension DPMS [ 4.671] (II) Loading extension XVideo [ 4.671] (II) Loading extension XVideo-MotionCompensation [ 4.671] (II) Loading extension X-Resource [ 4.671] (II) LoadModule: "dbe" [ 4.671] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so [ 4.671] (II) Module dbe: vendor="X.Org Foundation" [ 4.671] compiled for 1.11.3, module version = 1.0.0 [ 4.671] Module class: X.Org Server Extension [ 4.671] ABI class: X.Org Server Extension, version 6.0 [ 4.671] (II) Loading extension DOUBLE-BUFFER [ 4.671] (II) LoadModule: "glx" [ 4.671] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so [ 4.869] (II) Module glx: vendor="NVIDIA Corporation" [ 4.869] compiled for 4.0.2, module version = 1.0.0 [ 4.869] Module class: X.Org Server Extension [ 4.869] (II) NVIDIA GLX Module 295.40 Thu Apr 5 21:57:38 PDT 2012 [ 4.869] (II) Loading extension GLX [ 4.869] (II) LoadModule: "record" [ 4.870] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so [ 4.870] (II) Module record: vendor="X.Org Foundation" [ 4.870] compiled for 1.11.3, module version = 1.13.0 [ 4.870] Module class: X.Org Server Extension [ 4.870] ABI class: X.Org Server Extension, version 6.0 [ 4.870] (II) Loading extension RECORD [ 4.870] (II) LoadModule: "dri" [ 4.870] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so [ 4.870] (II) Module dri: vendor="X.Org Foundation" [ 4.870] compiled for 1.11.3, module version = 1.0.0 [ 4.870] ABI class: X.Org Server Extension, version 6.0 [ 4.870] (II) Loading extension XFree86-DRI [ 4.870] (II) LoadModule: "dri2" [ 4.871] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 4.871] (II) Module dri2: vendor="X.Org Foundation" [ 4.871] compiled for 1.11.3, module version = 1.2.0 [ 4.871] ABI class: X.Org Server Extension, version 6.0 [ 4.871] (II) Loading extension DRI2 [ 4.871] (==) Matched nvidia as autoconfigured driver 0 [ 4.871] (==) Matched nouveau as autoconfigured driver 1 [ 4.871] (==) Matched nv as autoconfigured driver 2 [ 4.871] (==) Matched vesa as autoconfigured driver 3 [ 4.871] (==) Matched fbdev as autoconfigured driver 4 [ 4.871] (==) Assigned the driver to the xf86ConfigLayout [ 4.871] (II) LoadModule: "nvidia" [ 4.871] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so [ 4.887] (II) Module nvidia: vendor="NVIDIA Corporation" [ 4.887] compiled for 4.0.2, module version = 1.0.0 [ 4.887] Module class: X.Org Video Driver [ 4.892] (II) LoadModule: "nouveau" [ 4.894] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so [ 4.894] (II) Module nouveau: vendor="X.Org Foundation" [ 4.894] compiled for 1.11.3, module version = 1.0.2 [ 4.894] Module class: X.Org Video Driver [ 4.894] ABI class: X.Org Video Driver, version 11.0 [ 4.894] (II) LoadModule: "nv" [ 4.895] (WW) Warning, couldn't open module nv [ 4.895] (II) UnloadModule: "nv" [ 4.895] (II) Unloading nv [ 4.895] (EE) Failed to load module "nv" (module does not exist, 0) [ 4.895] (II) LoadModule: "vesa" [ 4.895] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 4.896] (II) Module vesa: vendor="X.Org Foundation" [ 4.896] compiled for 1.11.3, module version = 2.3.0 [ 4.896] Module class: X.Org Video Driver [ 4.896] ABI class: X.Org Video Driver, version 11.0 [ 4.896] (II) LoadModule: "fbdev" [ 4.896] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 4.896] (II) Module fbdev: vendor="X.Org Foundation" [ 4.896] compiled for 1.11.3, module version = 0.4.2 [ 4.896] ABI class: X.Org Video Driver, version 11.0 [ 4.896] (==) Matched nvidia as autoconfigured driver 0 [ 4.896] (==) Matched nouveau as autoconfigured driver 1 [ 4.896] (==) Matched nv as autoconfigured driver 2 [ 4.896] (==) Matched vesa as autoconfigured driver 3 [ 4.896] (==) Matched fbdev as autoconfigured driver 4 [ 4.896] (==) Assigned the driver to the xf86ConfigLayout [ 4.896] (II) LoadModule: "nvidia" [ 4.896] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so [ 4.896] (II) Module nvidia: vendor="NVIDIA Corporation" [ 4.896] compiled for 4.0.2, module version = 1.0.0 [ 4.896] Module class: X.Org Video Driver [ 4.896] (II) UnloadModule: "nvidia" [ 4.896] (II) Unloading nvidia [ 4.896] (II) Failed to load module "nvidia" (already loaded, 32610) [ 4.896] (II) LoadModule: "nouveau" [ 4.897] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so [ 4.897] (II) Module nouveau: vendor="X.Org Foundation" [ 4.897] compiled for 1.11.3, module version = 1.0.2 [ 4.897] Module class: X.Org Video Driver [ 4.897] ABI class: X.Org Video Driver, version 11.0 [ 4.897] (II) UnloadModule: "nouveau" [ 4.897] (II) Unloading nouveau [ 4.897] (II) Failed to load module "nouveau" (already loaded, 32610) [ 4.897] (II) LoadModule: "nv" [ 4.897] (WW) Warning, couldn't open module nv [ 4.897] (II) UnloadModule: "nv" [ 4.897] (II) Unloading nv [ 4.897] (EE) Failed to load module "nv" (module does not exist, 0) [ 4.897] (II) LoadModule: "vesa" [ 4.898] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 4.898] (II) Module vesa: vendor="X.Org Foundation" [ 4.898] compiled for 1.11.3, module version = 2.3.0 [ 4.898] Module class: X.Org Video Driver [ 4.898] ABI class: X.Org Video Driver, version 11.0 [ 4.898] (II) UnloadModule: "vesa" [ 4.898] (II) Unloading vesa [ 4.898] (II) Failed to load module "vesa" (already loaded, 0) [ 4.898] (II) LoadModule: "fbdev" [ 4.898] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 4.898] (II) Module fbdev: vendor="X.Org Foundation" [ 4.898] compiled for 1.11.3, module version = 0.4.2 [ 4.898] ABI class: X.Org Video Driver, version 11.0 [ 4.898] (II) UnloadModule: "fbdev" [ 4.898] (II) Unloading fbdev [ 4.899] (II) Failed to load module "fbdev" (already loaded, 0) [ 4.899] (II) NVIDIA dlloader X Driver 295.40 Thu Apr 5 21:38:35 PDT 2012 [ 4.899] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs [ 4.899] (II) NOUVEAU driver Date: Wed Sep 12 13:42:43 2012 +0200 [ 4.899] (II) NOUVEAU driver for NVIDIA chipset families : [ 4.899] RIVA TNT (NV04) [ 4.899] RIVA TNT2 (NV05) [ 4.899] GeForce 256 (NV10) [ 4.899] GeForce 2 (NV11, NV15) [ 4.899] GeForce 4MX (NV17, NV18) [ 4.899] GeForce 3 (NV20) [ 4.900] GeForce 4Ti (NV25, NV28) [ 4.900] GeForce FX (NV3x) [ 4.900] GeForce 6 (NV4x) [ 4.900] GeForce 7 (G7x) [ 4.900] GeForce 8 (G8x) [ 4.900] GeForce GTX 200 (NVA0) [ 4.900] GeForce GTX 400 (NVC0) [ 4.900] (II) VESA: driver for VESA chipsets: vesa [ 4.900] (II) FBDEV: driver for framebuffer: fbdev [ 4.900] (++) using VT number 7 [ 4.902] (II) Loading sub module "fb" [ 4.902] (II) LoadModule: "fb" [ 4.902] (II) Loading /usr/lib/xorg/modules/libfb.so [ 4.902] (II) Module fb: vendor="X.Org Foundation" [ 4.902] compiled for 1.11.3, module version = 1.0.0 [ 4.902] ABI class: X.Org ANSI C Emulation, version 0.4 [ 4.902] (II) Loading sub module "wfb" [ 4.902] (II) LoadModule: "wfb" [ 4.903] (II) Loading /usr/lib/xorg/modules/libwfb.so [ 4.905] (II) Module wfb: vendor="X.Org Foundation" [ 4.905] compiled for 1.11.3, module version = 1.0.0 [ 4.905] ABI class: X.Org ANSI C Emulation, version 0.4 [ 4.905] (II) Loading sub module "ramdac" [ 4.905] (II) LoadModule: "ramdac" [ 4.905] (II) Module "ramdac" already built-in [ 4.907] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so [ 4.907] (II) Loading /usr/lib/xorg/modules/libwfb.so [ 4.907] (II) Loading /usr/lib/xorg/modules/libfb.so [ 4.912] (WW) Falling back to old probe method for vesa [ 4.912] (WW) Falling back to old probe method for fbdev [ 4.912] (II) Loading sub module "fbdevhw" [ 4.912] (II) LoadModule: "fbdevhw" [ 4.912] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 4.912] (II) Module fbdevhw: vendor="X.Org Foundation" [ 4.912] compiled for 1.11.3, module version = 0.0.2 [ 4.912] ABI class: X.Org Video Driver, version 11.0 [ 4.912] (II) NVIDIA(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 4.912] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32 [ 4.912] (==) NVIDIA(0): RGB weight 888 [ 4.912] (==) NVIDIA(0): Default visual is TrueColor [ 4.912] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) [ 4.912] (**) NVIDIA(0): Enabling 2D acceleration [ 5.442] (EE) NVIDIA(0): Failed to initialize the display subsystem for the NVIDIA [ 5.442] (EE) NVIDIA(0): graphics device! [ 5.442] (EE) NVIDIA(0): Failed to get supported display device(s) [ 5.442] (EE) NVIDIA(0): Failed to initialize dac HAL [ 5.442] (II) UnloadModule: "nvidia" [ 5.442] (II) Unloading nvidia [ 5.442] (II) UnloadModule: "wfb" [ 5.442] (II) Unloading wfb [ 5.442] (II) UnloadModule: "fb" [ 5.443] (II) Unloading fb [ 5.443] (EE) Screen(s) found, but none have a usable configuration. [ 5.443] Fatal server error: [ 5.443] no screens found [ 5.443] Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 5.443] Please also check the log file at "/var/log/Xorg.0.log" for additional information. [ 5.443] [ 5.447] ddxSigGiveUp: Closing log [ 5.447] Server terminated with error (1). Closing log file.

    Read the article

  • "Operation System not found" Dell XPS 15Z L511Z

    - by akikara
    Although title is the same problem is different. I've installed Ubuntu 14.04 Trusty on my HP EliteBook 6930p Notebook. And I was trying to create a bootable usb for my DELL XPS 15z. After successful creation of usb with usb-creator-gtk I plugged in bootable usb stick to DELL laptop. The error message was "Operation System not found". I tried several things but could not make it. When I check from working Ubuntu, I can see that usb is bootable and has files for installation.

    Read the article

  • Backtrack installation interrupted once, installed another time

    - by Bernard
    I installed Backtrack 5 from a Live CD yesterday and while installing, i closed my laptop to let it run while I sleep. But then I remembered my friend told me the plastic of his computer melted this way, so i opened it again. It put it on power save, and somehow the installation was interrupted. The day after, I tried again and this time it worked. Now, I have a GRUB Menu With Win7 and twice the Ubuntu + Safe mode or whatever it's called. How can I remove the failed installation without deleting Win7 or the successful installation? Normally I would use EasyBCD and delete the partitions, but this time I couldn't start Backtrack then. Thanks in advance Bernard

    Read the article

  • Problems with graphics of Sony Vaio Z

    - by dpcat237
    Hello, I have problem with my Sony Vaio Z VPCZ1. It has physical selector of GPUs which Linux kernel not detect. So after GRUB I see black display (I tried different distributions of Ubuntu and other Linux OS). I read in Ubuntu 10.10 was solve same problem with hybrid graphics but not in my case ^^ I found solutions (not easy at do) for oldest models. But I'm not expert in Linux and before I prefer ask people with more experience. Somebody can help me? Someone installed Ubuntu in same laptop? PS. for more information I found different webs: http://goo.gl/ktvq Thanks Regards

    Read the article

  • My fresh installed ubuntu 12,4 won´t start without live usb drive

    - by Alexander Neira
    I just installed a fresh copy of ubuntu 12,04 in my netbook, through a live USB drive. I used the whole HDD and erased an existent win 7 partition. It installed everything and then asked me to reboot. When I did that, after rebooting, it only appeared the writer marker on top of a black screen and only that. Then, i plugged in again my usb drive and reboot. It loaded, but in the loading screen sent me (once) an error about the hard drive, that some file was missing (sorry i coulnd't write down the exact message). After that, I tried to re install ubuntu using my USB drive, but it sends me inmediately to the login screen. How do I solve this?

    Read the article

  • Couldn't pass the signin screen

    - by Amokrane
    I have an issue here with my computer using ubuntu 10.10 on a 64 bits machine. When I start it, I have the login screen, I enter my credentials but instead of starting the session it reloads the login screen again. I checked the disc using fsck and it seems clean. How should I proceed to diagnose and repair this issue? Thanks! [Edit] I went to the log files, this is what I got: auth.log pam_unix (gdm:session): session opened for user amokrane by (uid=0) pam_ck_connector (gdm:session): nox11 mode, ignoring PAM_TTY :0 pam_unix (gdm:session) :session closed for user amokrane messages.log No ACPI video bus found I also took a shot with my camera of the black screen that appears between the two login screens, it says something like: fsck from util-linux-ng 2.17.2 /dev/sdc4 : propre, xxxx files, xxxx blocs Starting AppArmor profiles Skipping profiles in /etc/apparmor.d/disable: usr.bin.firefox Setting sensors limits Starting postgreSQL ... /var/log/Xorg.0.log [ 25.375] (II) intel(0): Modeline "1920x1080"x60.0 172.80 ... [ 28.850] (II) Power Button: Close [ 28.850] (II) UnloadModule: "evdev" [ 29.910] (II) Power Button: Close [ 28.910] (II) UnloadModule: "evdev" [ 28.941] (II) AT Translated Set 2 keyboard: Close [ 29.000] (II) ImPS/2 Generic Wheel Mouse: Close [ 29.000] (II) UnloadModule: "evdev" [ 29.039] ddxSigGiveUp: Closing log Update I tried the following: Ctrl-Alt-F1 on the login screen (to runt the console). sudo pkill startx sudo rm /tmp/.X0-locl startx But it tells me that the x server is already running.

    Read the article

  • Having problems booting xubuntu after installation

    - by lagaffenewbe
    I'm newbie with ubuntu, I tried to install ubuntu, at the beginning xubuntu work for the first upgrade to xubuntu 12.04, but after the reboot, no winxp media center ether Xubuntu won't start and I have a screen Ctrl+Alt+Del nothing else. I read a little about, maybe the sata enabled on the bios. What is the problem and can it be fixed or do I have to remove xubuntu. Partition is : 100gb xubuntu 220gb winxp I have an external drive 1 tb Thanks for the help.

    Read the article

  • How to "un-automount" external harddrive?

    - by Timon
    So I dualboot 12.10 and Win7. Both OSs are on the primary SSD while all commonly used data (documents, movies, music, profiles etc) is on a secondary NTFS-formatted HDD. Since I needed the NTFS drive to automatically mount in Ubuntu right at startup, I downloaded ntfs-config and set it to automount my NTFS drive. Problem is, I also accidentally told it to automount my external hard drive (which is also NTFS formatted). When booting up Ubuntu, it now checks for the presence of that drive every single time, which is getting annoying 'cause I don't always have it connected. I've tried un- and reinstalling ntfs-config, telling it to not automount the external HD, but to no avail. Any suggestions?

    Read the article

  • USB install from second internal hard drive in a MacBook Pro

    - by aaron.anderson
    I am trying to install Ubuntu (among others) on a second internal hard drive on my MacBook Pro. I have an 80 GB internal SSD with OS X on it, along with a 750 GB internal HD with a few partitions, one of which being for Ubuntu. I currently have rEFInd installed for switching between the OS's. I was wondering how one would go about installing Ubuntu from the USB install stick. I have followed the instructions on creating a bootable USB. Once this is bootable, could I just hold the Option key on startup, and it should appear in the menu? Or am I missing something?

    Read the article

  • Ubuntu 14.04.1 will not load - stops in tty1

    - by Mitya Stiglitz
    I was following some "guides" on how to clean my system and have cleaned it so well that it doesn't work anymore. Example: in synaptic, I completely removed all packages in "Not installed: residual configuration" and a ton of other packages I "don't need". I know this has probably been asked a trillion times but I really need to find out how to get back to the working OS I had about two hours ago. One hour of googling has not helped me, so I am asking here. When I start Ubuntu, usually nothing happens for quite some time and then tty1 starts. I can log in normally, but I don't know how to proceed from there. I can do: less /var/log/apt/history.log and get a log, but I don't know how to get started with this...

    Read the article

  • How do I stop Gimp from autolaunching on startup?

    - by Joshua Fox
    Gimp launches every time I log into Xubuntu (v. 13.10). Gimp is not shown under Settings Manager- Sessions and startup. It does not appear in ~/.config/autostart. I immediately close Gimp in these cases, so it is not running when I shut down the session. How do I stop Gimp from autolaunching on startup? Diagnostic Info: Note that cd / find . -name gimp.desktop Only produces ./usr/share/applications/gimp.desktop and nothing else Here is the output of grep -lIr 'gimp' ~/ ~/Gimp-search-results.txt sbin/vgimportclone home/joshua/.gimp-2.8/controllerrc home/joshua/.gimp-2.8/tags.xml home/joshua/.gimp-2.8/dockrc home/joshua/.gimp-2.8/gimprc home/joshua/.gimp-2.8/themerc home/joshua/.gimp-2.8/templaterc home/joshua/.gimp-2.8/gtkrc home/joshua/.gimp-2.8/sessionrc home/joshua/.gimp-2.8/toolrc home/joshua/.gimp-2.8/pluginrc home/joshua/.gimp-2.8/menurc home/joshua/Gimp-search-results.txt home/joshua/.local/share/ristretto/mime.db home/joshua/.wine/drive_c/windows/system32/gecko/1.4/wine_gecko/dictionaries/en-US.dic home/joshua/.wine/drive_c/windows/syswow64/gecko/1.4/wine_gecko/dictionaries/en-US.dic home/joshua/.cache/software-center/piston-helper/rec.ubuntu.com,api,1.0,recommend_app,skype,,0495938f41334883bd3a67d3b164c1d1 home/joshua/.cache/software-center/piston-helper/rec.ubuntu.com,api,1.0,recommend_app,gnome-utils,,91bba9b826fb21dbfc3aad6d3bd771cb home/joshua/.cache/software-center/piston-helper/rec.ubuntu.com,api,1.0,recommend_app,icedtea-plugin,,7bb5e4ad0469ef8277032c048b9d7328 home/joshua/.cache/software-center/piston-helper/reviews.ubuntu.com,reviews,api,1.0,review-stats,any,any,,1c66e24123164bb80c4253965e29eed7 home/joshua/.cache/software-center/piston-helper/rec.ubuntu.com,api,1.0,recommend_app,wine1.4,,2bac05a75dcec604ee91e58027eb4165 home/joshua/.cache/software-center/piston-helper/software-center.ubuntu.com,api,2.0,applications,en,ubuntu,saucy,amd64,,32b432ef7e12661055c87e3ea0f3b5d5 home/joshua/.cache/software-center/apthistory.p home/joshua/.cache/software-center/reviews.ubuntu.com_reviews_api_1.0_review-stats-pkgnames.p home/joshua/.cache/oneconf/861c4e30b916e750f16fab5652ed5937/package_list_861c4e30b916e750f16fab5652ed5937 home/joshua/.cache/sessions/xfwm4-23e853443-fb4b-42fd-aa61-33fa99fdc12c.state home/joshua/.cache/sessions/xfce4-session-athena:0 home/joshua/.config/abiword/profile

    Read the article

  • Difference between LiveCD, LiveUSB, full-install, and persistence?

    - by Jay
    I am currently running Ubuntu as a guest vm on a Win 7 host via VirtualBox, but I would like to have a portable version of Ubuntu when I am not using my laptop. I am unsure as to the difference between the following: 1)LiveCD with persistence; 2)LiveCD without persistence; 3)LiveUSB with persistence; 4)LiveUSB without persistence; 5)Full-install. I have a USB flash drive (32GB), and I also have empty DVDs lying around. I know that persistence means that data can be saved, but I am unsure as to which option to choose. What is the difference between a LiveUSB and a full-install on a USB thumbdrive and why would I want to pick one over the other? Thanks for any help.

    Read the article

  • Black screen when running xubuntu 13.10 after upgrade

    - by user213030
    I have a xubuntu v12 that I updated to v13.10. Sice the upgrade I get the black screen at a startup. I can get to the console and login. How can I run it in graphic mode? I run it on Oracle Virtualbox. Starting the VirtualBox Guest Additions ...done. Starting VirtualBox Guest Addition service ...done. saned disabled; edit /etc/default/saned; * Restoring resolver state... [ OK ] And it hangs on this.

    Read the article

  • Unable to configure a service to run at startup with update-rc.d

    - by ujjain
    I would like to have transmission-daemon and vnstat automatically run at startup. I was able to configure this for apache2 and proftpd with exactly the same commands. 795 sudo update-rc.d transmission-daemon remove 797 sudo update-rc.d -f transmission-daemon remove 798 sudo update-rc.d transmission-daemon defaults 799 sudo update-rc.d vnstat remove 800 sudo update-rc.d -f vnstat remove 801 sudo update-rc.d -f vnstat defaults 802 sudo update-rc.d -f vnstat enable 805 reboot 807 history root@htpc:/home/administrator# sudo update-rc.d -f transmission-daemon remove Removing any system startup links for /etc/init.d/transmission-daemon ... /etc/rc0.d/K20transmission-daemon /etc/rc1.d/K20transmission-daemon /etc/rc2.d/S20transmission-daemon /etc/rc3.d/S20transmission-daemon /etc/rc4.d/S20transmission-daemon /etc/rc5.d/S20transmission-daemon /etc/rc6.d/K20transmission-daemon root@htpc:/home/administrator# sudo update-rc.d -f transmission-daemon defaults Adding system startup for /etc/init.d/transmission-daemon ... /etc/rc0.d/K20transmission-daemon -> ../init.d/transmission-daemon /etc/rc1.d/K20transmission-daemon -> ../init.d/transmission-daemon /etc/rc6.d/K20transmission-daemon -> ../init.d/transmission-daemon /etc/rc2.d/S20transmission-daemon -> ../init.d/transmission-daemon /etc/rc3.d/S20transmission-daemon -> ../init.d/transmission-daemon /etc/rc4.d/S20transmission-daemon -> ../init.d/transmission-daemon /etc/rc5.d/S20transmission-daemon -> ../init.d/transmission-daemon root@htpc:/home/administrator# service vnstat status * vnStat daemon is not running root@htpc:/home/administrator# service transmission-daemon status * transmission-daemon is not running root@htpc:/home/administrator# service transmission-daemon start * Starting bittorrent daemon transmission-daemon [ OK ] root@htpc:/home/administrator# service vnstat start * Starting vnStat daemon vnstatd [ OK ] root@htpc:/home/administrator# service apache2 status Apache2 is running (pid 1137). root@htpc:/home/administrator#

    Read the article

  • How to fix no splash screen in Ubuntu after nvidia proprietary driver installation (also black borders)

    - by Fabio Trevisiol
    This is soultion how to fix no splash screen in Ubuntu after nvidia proprietary driver installation. It's no matter what Ubuntu version you use, it should work anyway. (TESTED ON 14.04) Open your terminal and type: sudo apt-get install v86d (TEST WITHOUT) Then: sudo gedit /etc/default/grub Find this line: #GRUB_GFXMODE=640x480 Add below (of course choose your resolution): GRUB_GFXMODE=1024x768x32 (TRY WITHOUT OR DIFFERENT BIT DEPTH) GRUB_GFXPAYLOAD_LINUX=1920x1080x32 (YOU CAN ALSO USE THE KEEP OPTION) Save file and type in terminal: echo FRAMEBUFFER=y | sudo tee /etc/initramfs-tools/conf.d/splash (ALLOWS TO AVOID THAT THE SPLASH SCREEN IS DISPLAYED FOR A FEW SECONDS) sudo update-initramfs -u sudo update-grub2 For all those who complain about the presence of black borders in "plymouth", try to make these changes before installing the nvidia driver or switch back from nvidia to nouveau and from nouveau to nvidia. Kernel update from the Software Updater? It happened to me; I don't know if it matters. I don't know for which of these reasons, but after a few reboots, the black borders are gone. UPDATE discovered the secret: during all these beautiful things, something strange happened. glxinfo | grep vendor server glx vendor string: SGI client glx vendor string: Mesa Project and SGI OpenGL vendor string: nouveau

    Read the article

  • Black screen after installing ubuntu 12.04

    - by neodyme
    :) After installing Ubuntu 12.04 from a CD, everything goes perfectly until I restart the computer (after the installation process) im not able to see the login screen, I just get a black screen! so I press randomly keys and sometimes im able to see the background wallpaper but almost instantly the black screen appears. I think that I have to update the nVidia drivers or something like this I tried to start from the recovery mode, update my package, but still the same problem I can't start with the graphical interface as well, i get an error message 'no screen' !! I dont understand why I have this problem because before the installation im able to try ubuntu (from the cd) and works perfect. Thanks !!

    Read the article

  • System displays "File system maintenance error, press ctrl+d" while booting

    - by user3215
    In my office I've Ubuntu 8.10 desktop installed and it's running for a long time. When ever the system is started, I'll get a file system maintenance error and something it's prompted for the root password or (press ctrl+d to continue). After pressing Ctrl+D the system normally boots up. I could not resolve this issue for a long time and I think something should be done in the fstab file. I'm not sure to do anything and expecting the experts here to help to perfectly fix this. Any help is appreciated. Thanks!

    Read the article

  • HP ENVY TouchSmart 15t-j000 Quad Edition + custom mSata Plextor M5M 64GB SSD

    - by Akash Ramani
    The ssd did not come along with the laptop, so i bought one myself and physically installed it. I've booted into Ubuntu from a USB drive and my goal is to install / and /home in the SSD. (because most of the actual media exists on the HDD) The only problem is i'm unable to detect the SSD while configuring the partitions. I know the SSD is not the problem because it recognizes in a different laptop. I've followed the instructions shown in https://help.ubuntu.com/community/UEFI but that still doesn't help in identifying the SSD partition. Any help would be appreciated. (p.s: I'm wondering if i have to prepare the SSD through windows or something like that)

    Read the article

  • Can I use MSBuild to build old VS6 C++ projects?

    - by awe
    I have a build computer where Visual Studio not installed, only MSbuild which can build VS2008 projcets without having any Visual Studio installed. I wonder whether it is possible to use MSbuild with VC++ 6.0 project files, although I am thinking this could not be possible. In the past I have used it with a VS2008 solution file for C++, but not for building C++ 6.0 dsw file. For Vb6 we have an extension package for Msbuild (MSBuild.ExtensionPack.VisualStudio.VB6). Is anything similar available for C++ 6.0 projects? An alternative could be if there are lightweight build tools that can built VC6++ .dsw files without having to install Visual Studio 6.0 ?

    Read the article

  • Windows 8 + Ubuntu dualboot problem - ubuntu does not load after windows updates

    - by Michal Biros
    I have installed Windows 8 64-bit and Ubuntu 14.04 64-bit in dualboot with EFI mode. Everything worked great. I could run Ubuntu or Windows without any problems. Only one little issue was that Windows locked NTFS partitions when I shut it down. When I clicked on restart button in Windows and started Ubuntu, partitions mounted successfully. But today ... I opened windows and downloaded all available updates. When I wanted to come back to Ubuntu I noticed that grub did not count down seconds to automatic start. After choosing Ubuntu option manually, the OS did not load. Just black screen with white underscore in the upper left corner. Windows is accessible always without such issues. Last time I solved it by reinstalling ubuntu but I dont want to do it each time windows downloads some updates. Have you ever meet such problem, or do you know how to solve it? EDIT Ubuntu boots, but it won't start. It ends on loading screen.

    Read the article

  • Ubuntu installation on Windows , I can't find my way back.

    - by Poofs
    So recently I have installed Ubuntu as an OS in addition to my Windows because it looked good and I have used it in the past and I liked it. Before I installed Ubuntu, they (the website) have given me a help list that shows that I will have the option of having Windows aside to Ubuntu (dual install), while I work with the Ubuntu OS. They told me that if I either put it in a CD or USB drive, I'll be okay. So there I was, installing Ubuntu, saving the Ubuntu file on my USB drive first, then afterwards clicking it and therefore proceeded to install. The problem is once I installed Ubuntu, it directed me to the 'login' page without giving me an option for dual-installing (you know, the language portion and so on). Now I tried both to suspend and shut off, and it seems like I cannot access my Windows files/account anymore and it really is unfortunate. Now I am FREAKING out, because this is a shared computer that my family uses (it's like a main computer in the house) and everyone's files are on this. It is extremely crucial for me to get these Windows files back because if I don't, my life will end tonight. Please, if someone can help me, I will love you forever. Please just help me, this is urgent. I'm sure a lot of people have experienced this too, but I have found nothing on the website helpful for me as Ubuntu is a very new thing for me. Thanks everyone! :)

    Read the article

  • Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block 0,0

    - by AlbertK
    I've read the following two solution: Kernel Panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) kernel panic not syncing vfs unable to mount root fs on unknown block oo swapper not tainted ,but still got the same problem. Here's my full error code: [1.902269] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [1.902299] Pid: 1, comm: swapper/0 Not tainted 3.2.0-29-generic #46-Ubuntu [1.902325] Call Trace: [1.902348] [<ffffffff81640ec8>] panic+0x91/0x1a4 [1.902373] [<ffffffff81cfc01e>] mount_block_root+0xdc/0x18e [1.902400] [<ffffffff81002930>] ? populate_rootfs_wait+0x300/0x9d0 [1.902426] [<ffffffff81cfc257>] mount_root+0x54/0x59 [1.902450] [<ffffffff81cfc3c9>] prepare_namespace+0x16d/0x1a6 [1.902476] [<ffffffff81cfbd63>] kernel_init+0x153/0x158 [1.902501] [<ffffffff81664034>] kernel_thread_helper+0x4/0x10 [1.902527] [<ffffffff81cfbc10>] ? start_kernel+0x3bd/0x3bd [1.902551] [<ffffffff81664030>] ? gs_change+0x13/0x13 I don't know what these error messages mean at all, but I hope that these will help to solve this problem I'm running Ubuntu 12.04. Thanks for any advice.

    Read the article

< Previous Page | 99 100 101 102 103 104 105 106 107 108 109 110  | Next Page >