Search Results

Search found 3651 results on 147 pages for 'direct booking'.

Page 103/147 | < Previous Page | 99 100 101 102 103 104 105 106 107 108 109 110  | Next Page >

• WD my cloud 4th is Super Slow

  - by Saduser

  I am using a WD my cloud 4Tb and I have read other posts about users complaining about getting only 10Mb per second. My problem is that I am getting about 100kb/s to transfer a 125gb iPhoto library. Estimated time is 11 days to transfer this file. This is unacceptable. On the back of the WD cloud I am getting a solid green light and from what I read this means that I am on a gigabyte network. I have mac book pro running Mac OS Mavericks. I have tried 4 different cables and turned off my router firewall. I don't run anti-virus nor any firewall on the mac. Other things I have checked: direct connection to both router and WD cloud device. Tried wireless but it is even slower. Previously I was able to transfer a 55Gb iPhoto library in 14 hours which I felt was acceptable. I figured it would take approximately double the time to transfer the 125gb file but 11 days is ridiculous. Any other suggestions? Anything else I can check (how to check it) what is the bottle neck?

  Read the article

• Why are folders disappearing in Windows XP?

  - by XenoFoxx

  I am researching a problem for a friend, and unfortunatly do not have direct access to his computer. I've tried to gather as much information as possible and I have researched it on various websites. I've not found anyone having the same problem my friend is having. So here goes: He has a media server in his home running Microsoft Windows XP. It has 3 drives, 1 for the OS and 2 for mass storage. Not long ago he went to access one of the mass storage media drives and it was empty, except for a single folder. His first assumption was that his roommate had deleted everything on the drive (excluding the remaining folder). He then checked the properties of the drive and it was still saying that the hard drive was nearly full. I told him to check the recycling bin, thinking that whoever deleted them didn't clear them from recycling and that they were still taking up space on the drive. My friend said the recycling bin was empty. So we have a drive that the Windows file management system says is empty (again except for the remaining folder), but the properties of the drive say it's mostly full. Now it gets weirder My friend tried to create a new folder on this drive and it auto-named itself "New Folder(1)" which means that it recognizes there is already a "New Folder" in that directory. He tried to rename it to a name that he KNEW was there previsouly, and Windows wouldn't allow it because it was a duplicate folder name. SO now it seems the folders are there, but not displaying in Windows Explorer. Both of us have no idea why this is occuring, why the folders vanished, why the one remaining folder didn't vanish, or how to make them visable again. Anyone else ever experience this? I can get more details if needed.

  Read the article

• Raid-5 Performance per spindle scaling

  - by Bill N.

  So I am stuck in a corner, I have a storage project that is limited to 24 spindles, and requires heavy random Write (the corresponding read side is purely sequential). Needs every bit of space on my Drives, ~13TB total in a n-1 raid-5, and has to go fast, over 2GB/s sort of fast. The obvious answer is to use a Stripe/Concat (Raid-0/1), or better yet a raid-10 in place of the raid-5, but that is disallowed for reasons beyond my control. So I am here asking for help in getting a sub optimal configuration to be as good as it can be. The array built on direct attached SAS-2 10K rpm drives, backed by a ARECA 18xx series controller with 4GB of cache. 64k array stripes and an 4K stripe aligned XFS File system, with 24 Allocation groups (to avoid some of the penalty for being raid 5). The heart of my question is this: In the same setup with 6 spindles/AG's I see a near disk limited performance on the write, ~100MB/s per spindle, at 12 spindles I see that drop to ~80MB/s and at 24 ~60MB/s. I would expect that with a distributed parity and matched AG's, the performance should scale with the # of spindles, or be worse at small spindle counts, but this array is doing the opposite. What am I missing ? Should Raid-5 performance scale with # of spindles ? Many thanks for your answers and any ideas, input, or guidance. --Bill Edit: Improving RAID performance The other relevant thread I was able to find, discusses some of the same issues in the answers, though it still leaves me with out an answer on the performance scaling.

  Read the article

• Need to get SMTP server on MS Server 2003

  - by Matt Dawdy

  Long story short, client paid networking company to move their website in house. Now I have to figure out how to email out from their website even though they don't have an SMTP server. At least until I install one. Their email is hosted with Gmail right now (the client's domain through Google App for Your Domain). I changed my code to connect as one of their users "[email protected]" and send email. Worked great for about 12 hours. All of a sudden none of the automated emails are going out now, and google is sending the emails back saying that it is a permanent failure and Message Rejected. The link they direct me to, http://mail.google.com/support/bin/answer.py?answer=69585 is telling me that our emails look like spam. They aren't. They are emails we send to out clients about the status of their applications. Seriously, they are NOT spam. So...long story short is out the window, sorry...but I need to get an SMTP server setup inside their domain that I can send emails out of. This thing won't need to receive emails ever, and really only needs 1 email account customercare. What can I do? Will I have to have the networking company open a port in the firewall? Is there one built into Server 2003?

  Read the article

• If I scp a file through an intermediate server, is the file stored temporarily on the server?

  - by Blacklight Shining

  For the sake of simplicity (I find it easier to remember names than arbitrary letters), I will dispense with letters and use names to refer to the machines in this scenario. Say I have two machines, applejack and pinkie-pie, each on their own separate LANs and not in the same physical location. I also have a server, cadance, with a direct Internet-facing connection. I want to copy a file from applejack to pinkie-pie, so to avoid dealing with port forwarding and such, I set up an ssh tunnel from pinkie-pie to cadance (ssh -R etc cadance). Now I can connect to pinkie-pie from anywhere, by connecting to cadance and specifying an alternate port to use. I can also easily copy files to pinkie-pie with scp -P $that_port $some_file cadance:$some_path. My understanding of how it works is this: A secure connection is made from applejack to cadance I am authenticated to cadance A secure connection is made from applejack to pinkie-pie that spans the existing reverse tunnel and the new connection from step 1. I am authenticated to pinkie-pie Files are copied directly from applejack to pinkie-pie over this connection. Am I correct here? How secure is this approach? If I'm wrong…are files copied this way decrypted at cadance before being passed on to pinkie-pie? Is there a possibility that traces of unencrypted data could remain on cadance?

  Read the article

• Can't do more than one activity at a time after switching modems

  - by vallorn

  I had to replace the Motorola 2210 DSL modem that I got when I signed up for AT&T DSL Direct a few years ago. The modem kept randomly restarting and it eventually gave out on me. I am assuming overheating was the cause here because it was almost too hot to touch. In any case, I replaced it with a Netgear DM111PSP. It works fine but I can't do more than one activity at a time with it. If my wife is watching Netflix, there is a noticeable delay/latency when trying to view web sites. It's even worse if I try to play an on-line game while she's streaming; the game is basically unplayable. The odd thing is, the only other activity I can do while she's streaming is stream another Netflix show myself. There is no delay when doing that, no buffering either. I'm not a networking guy so maybe there is an explanation for it but I find that kind of odd. I've tried using QoS through my Buffalo N600 wireless router and it doesn't seem to help. With the old Motorola modem, she could be watching Netflix while I play a game and everything worked just fine. Is there anything I can check or reconfigure possibly on the modem that would account for this? Should I just ditch the Netgear and get another modem instead? I have the Netgear modem connected to the Buffalo router in a bridged mode. Its the same exact setup as I had with the Motorola and as far as I can tell, it's not the router that is the cause.

  Read the article

• Error installing new rails version. Failed to build gem native extension.

  - by davidcmolina

  I am trying to build my first ruby on rails app using the following guide (http://ruby.railstutorial.org/chapters/a-demo-app#code-demo_gemfile_sqlite_version_redux) and have run into a few obstacles. The first, receiving errors when upgrading to the latest rails version 3.2.8. bash-3.2$ gem install rails Building native extensions. This could take a while... ERROR: Error installing rails: ERROR: Failed to build gem native extension. /Users/davidmolina/.rvm/rubies/ruby-1.9.3-p194/bin/ruby extconf.rb creating Makefile make compiling generator.c make: /usr/bin/gcc-4.2: No such file or directory make: *** [generator.o] Error 1 Gem files will remain installed in /Users/davidmolina/.rvm/gems/ruby-1.9.3-p194/gems/json-1.7.5 for inspection. Results logged to /Users/davidmolina/.rvm/gems/ruby-1.9.3-p194/gems/json-1.7.5/ext/json/ext/generator/gem_make.out Even when trying to install from rails app: $ gem install rails Building native extensions. This could take a while... ERROR: Error installing rails: ERROR: Failed to build gem native extension. /Users/davidmolina/.rvm/rubies/ruby-1.9.3-p194/bin/ruby extconf.rb creating Makefile make compiling generator.c make: /usr/bin/gcc-4.2: No such file or directory make: *** [generator.o] Error 1 Gem files will remain installed in /Users/davidmolina/.rvm/gems/ruby-1.9.3-p194/gems/json-1.7.5 for inspection. Results logged to /Users/davidmolina/.rvm/gems/ruby-1.9.3-p194/gems/json-1.7.5/ext/json/ext/generator/gem_make.out When trying to Bundle Install: $ bundle install Could not locate Gemfile Background details: Mac OS X Version 10.8.2 Ruby 1.9.3 Rails 2.3.4 I'm wondering if there is a direct one-liner or gem that is missing?

  Read the article

• MDT 2010 Litetouch.vbs Fails to Launch

  - by Mitch

  I have the custom image captured. Import the image and files. Prepare the customsettings.ini and the boot.ini to minimize the questions the deployment team will need to answer. Everything works like a charm on virtual machines but when I map to the scripts folder on the deployment share and double-click litetouch.vbs it creates the c:\minint folder, subfolders, and a couple of log files then nothing. Here's what the log files look like: <![LOG[Property LogPath is now = C:\MININT\SMSOSD\OSDLOGS]LOG]!><time="15:54:28.000+000" date="03-08-2011" component="LiteTouch" context="" type="1" thread="" file="LiteTouch"> <![LOG[Property CleanStart is now = ]LOG]!><time="15:54:28.000+000" date="03-08-2011" component="LiteTouch" context="" type="1" thread="" file="LiteTouch"> <![LOG[Microsoft Deployment Toolkit version: 5.1.1642.01]LOG]!><time="15:54:28.000+000" date="03-08-2011" component="LiteTouch" context="" type="1" thread="" file="LiteTouch"> <![LOG[Property Debug is now = FALSE]LOG]!><time="15:54:28.000+000" date="03-08-2011" component="LiteTouch" context="" type="1" thread="" file="LiteTouch"> <![LOG[GetAllFixedDrives(False)]LOG]!><time="15:54:28.000+000" date="03-08-2011" component="LiteTouch" context="" type="1" thread="" file="LiteTouch"> Anyone encounter this before or know what might be happening/not happening and can direct me in the right way? I've only found a couple of other references to this anywhere and they had no solution/cause listed either. I'm stumped.

  Read the article

• Password Manager that allows syncing accross platforms

  - by lexu

  I use OS X, Linux, Solaris and windows for work and from home. There are good tools that allow me to manage the many logins/passwords required platform independently. But mostly they expect me to carry a thumb-drive around or require direct access to a central location (a sky drive in the cloud). The thumb-drive is too easily lost (= synchronized backup needed), the central location not always reachable/ mountable. Besides company policy rightly prevents this often. Is there a tool that allows me to add passwords locally and then syncs it's DB with the "mother-ship" later. Or is there another approach that you use, that solves my problem? EDIT My question is more about "synchronize" than cross platform. I've evaluated (=read feature list) some good cross platform tools, but need one that does the synchronizing for me. By synchronize I mean "merge two versions" not "replace (hopefully) old file with new." I'm not sure I'm always disciplined/awake enough to prevent data loss. UPDATE Lifehacker just posted that AgileSolutions now have a beta version of 1Password for Windows.

  Read the article

• Brick-level backup and restore with exchange 2007

  - by V. Romanov

  In the company I'm working for, we use exchange 2007 and backup it using netbackup. The backup is a daily complete backup of the information store and the direct corollary of this is that restores are hell. We need to restore the entire information store (over 80 gb), somehow merge it back with the original store, which causes problems. Alternatively, we tried using QUEST software to emulate exchange and restore mails from the emulation. However, this proved unreliable. The main problem with this entire situation is that we have to restore the whole information store and walk it through the restore process manually, and its quite absurd to be forced spend more than a day restoring even one erased email. (we have erased mail retention, but sometimes we need to restore older mail). in comparison, back in the day of XCH2003 and backupexec 12, we had complete brick level backup and restore at the push of a button. I've spoken to one of our chief sysadmins who claimed that the official response from microsoft to this issue was - "sorry guys, no brick level backup in XCH2007" which sounds ridiculous to me. Can someone shed some light on the situation? How do you backup your exchange2007 stores? Can you restore a single email quickly? A mailbox, perhaps?

  Read the article

• RabbitMQ message consumers stop consuming messages

  - by Bruno Thomas

  Hi server fault, Our team is in a spike sprint to choose between ActiveMQ or RabbitMQ. We made 2 little producer/consumer spikes sending an object message with an array of 16 strings, a timestamp, and 2 integers. The spikes are ok on our devs machines (messages are well consumed). Then came the benchs. We first noticed that somtimes, on our machines, when we were sending a lot of messages the consumer was sometimes hanging. It was there, but the messsages were accumulating in the queue. When we went on the bench plateform : cluster of 2 rabbitmq machines 4 cores/3.2Ghz, 4Gb RAM, load balanced by a VIP one to 6 consumers running on the rabbitmq machines, saving the messages in a mysql DB (same type of machine for the DB) 12 producers running on 12 AS machines (tomcat), attacked with jmeter running on another machine. The load is about 600 to 700 http request per second, on the servlets that produces the same load of RabbitMQ messages. We noticed that sometimes, consumers hang (well, they are not blocked, but they dont consume messages anymore). We can see that because each consumer save around 100 msg/sec in database, so when one is stopping consumming, the overall messages saved per seconds in DB fall down with the same ratio (if let say 3 consumers stop, we fall around 600 msg/sec to 300 msg/sec). During that time, the producers are ok, and still produce at the jmeter rate (around 600 msg/sec). The messages are in the queues and taken by the consumers still "alive". We load all the servlets with the producers first, then launch all the consumers one by one, checking if the connexions are ok, then run jmeter. We are sending messages to one direct exchange. All consumers are listening to one persistent queue bounded to the exchange. That point is major for our choice. Have you seen this with rabbitmq, do you have an idea of what is going on ? Thank you for your answers.

  Read the article

• Speeding up Outlook Express on Windows XP over satellite

  - by John

  My brother is in the field with Doctors Without Borders. I'm posting this question on his behalf. We use outlook express (on a pc running windows XP) and a 9600 baud dial up satellite phone modem to get our email direct from the server in Paris. As this is a very expensive way to communicate (our satellite bill is $50K a year, no joke), it seems like trying to streamline is a good idea. Here's the question- when we connect, the sequence goes: Send outbox mails. This goes pretty quickly, probably 10-15 seconds for each email, up to maybe a couple minutes for an email of 150k or so). The status bar moves pretty quickly, according to the emails sent. The system then says "Checking for new messages on (our account name), and "Receiving list of messages from server". This takes a long time. Like 10-15 minutes. The status bar crawls along. Then it receives the messages. "Receiving messages from server". Again, each message takes 10-15 seconds, and this part moves along reasonably fast. I'm curious as to what is going on in the second part. It takes forever, and doesn't seem to be part of the sending or receiving messages themselves. Is there a way to speed up the process by changing a preference with communicating with the server or something? Does anyone have any advice for him speeding up what Outlooks Express is doing? Obviously his software is ancient and adding more software is not realistic based on the connection speed. Thanks!

  Read the article

• how to design pound -> varnish -> jboss for ha + loadbalancing

  - by andreash

  Hello, I'm planning a new infrastructure for our web application. We have two JBossAS5 servers, running in a cluster. Session state will be replicated via JBoss Cache. In front of that, there should be some cache, to speed up delivery of static elements. However, most of the traffic to our app will be via HTTPS. So far, I had been thinking of two Varnish caches in front of the JBossASs, each being configured for loadbalancing to the two JBossASs via round-robin. Since Varnish doesn't handle HTTPS, then there would need to be two pound proxies in front of the Varnishs, dealing with the HTTPS. The two pounds would be made high-available with Heartbeat/LinuxHA. The traffic to www.example.com would then be going through our firewall, from there to the virtual IP of the pounds, from there to the Varnishs, and from there to the JBossASs. Question 1: Does this make sense? Or is it overly complicated, and the same goal can be reached with simpler methods? Question 2: If my layout is fine, how do I configure the pound - Varnish step? Should I a) make the Varnish service high-available through Heartbeat/LinuxHA as well and direct traffic from pound to the virtual IP of the Varnishs, or should I rather b) Configure two independent Varnishs and use load-balancing in pound to address the different Varnishs? Thanks a lot for your insight! Andreas.

  Read the article

• Backup data rate on Raspberry Pi maxing out at 5 Mb/s. Why?

  - by bastibe

  I set up my Raspberry Pi as a Time Machine, as documented here. At the moment, the Raspberry Pi is connected to my MacBook Pro using a direct Ethernet cable. Also, an external hard drive (laptop drive) is connected to the Raspberry Pi using the USB port. However, backups are pretty slow. Activity Monitor claims that the Network is transferring a very steady 5 Mb/s, where my Time Capsule is transferring up to 8 Mb/s with a lot of fluctuation. The Raspberry Pi self-reports (top) that its CPU is only half-used, with about equal parts afpd, usb-storage and jbd2/sda1-8. Thus, I think that the processing power of the Raspberry Pi does not seem to be the problem here. To me, this looks like there is some kind of bottleneck that maxes out at 5 Mb/s thus potentially having my backups run at less than their potential speed. To the best of my knowledge, this might be the afp-daemon, the usb-bus or the external hard drive. So, my question is, how could I identify the true culprit and what can I do about it?

  Read the article

• Can't mount FAT32 drive under Ubuntu Linux

  - by Josh

  I have a 320GB USB drive with a single large FAT32 partition. The volume mounts perfectly fine on my Mac OS X 10.5.8 machine and Disk Utility on the mac reports no issues with the volume. I can read/write all data on the drive. However when I connect the drive to my Ubuntu 9.10 Karmic system, the partition does not mount. dmesg|tail says: [ 2752.334822] scsi3 : SCSI emulation for USB Mass Storage devices [ 2752.335040] usb-storage: device found at 3 [ 2752.335044] usb-storage: waiting for device to settle before scanning [ 2757.330301] usb-storage: device scan complete [ 2757.331005] scsi 3:0:0:0: Direct-Access WD 3200AAK External 1.65 PQ: 0 ANSI: 0 [ 2757.331772] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 2757.355647] sd 3:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 2757.360737] sd 3:0:0:0: [sdb] Write Protect is off [ 2757.360749] sd 3:0:0:0: [sdb] Mode Sense: 00 00 00 00 [ 2757.360755] sd 3:0:0:0: [sdb] Assuming drive cache: write through [ 2757.367618] sd 3:0:0:0: [sdb] Assuming drive cache: write through [ 2757.367631] sdb: sdb1 [ 2762.797622] sd 3:0:0:0: [sdb] Assuming drive cache: write through [ 2762.797636] sd 3:0:0:0: [sdb] Attached SCSI disk [ 2822.866228] FAT: bogus number of reserved sectors [ 2822.866237] VFS: Can't find a valid FAT filesystem on dev sdb1. When I run fsck.vfat -a /dev/sdb1 I get: root@cartman:~# fsck.vfat -a /dev/sdb1 dosfsck 3.0.3, 18 May 2009, FAT32, LFN Logical sector size is zero. Googling "vfat Logical sector size is zero" produced no consensus as to the solution. I would prefer not to have to completely reformat the disk if possible because it contains about 280GB of data I would rather not have to find a temporary home for. Any suggestions?

  Read the article

• Why can't this user connect to domain share?

  - by Saariko

  Part of my reorganizing credentials in the domain, I have created several users that will be used solely for services (backup, LDAP, etc) The idea is that systems that need specific usage will use a user/service user, that will give them what they need. However, I am having trouble setting the correct needed data. For this example, I have a NAS (Ready NAS 1100 by Netgear), that runs it's own backup jobs. The job reads from a domain share: \domain\qa and copies all data to another location. When using the domain\administrator everything works. When I input the domain\srv.backup user I get an error connecting to the folder. The srv.backup is part of the 'Domain Admins' group, which is a member of 'Administrators' I thought there might be propagation issues, but even when the srv.backup user was a direct member of 'Administrators' the error still occurred. I have 2 DC's (W2K8R2 replicas) - I thought that could also cause a problem, AFAIKT it's not the issue. Sharing permissions are open to everyone The Security on the folder is as follow This is the test window from the NAS dashboard I doubled check that the 'srv.domain' is part of the 'Domain Admins' group As well as tried with a simple 1-9 password. What else do I need to check? thanks.

  Read the article

• X11 performance problem after upgrading from Centos3 to Centos5 with an ATI Rage XL

  - by Marcelo Santos

  After upgrading a computer from Centos3 to Centos5 an application that does a lot of scrolling took a very high performance hit. top tells me that X is using a lot of CPU and that was not happening before. The machine has an ATI Rage XL with 8MB and X is using the ati driver as there is no proprietary ATI driver for this board on linux. The xorg.conf: Section "Device" Identifier "Videocard0" Driver "ati" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 Modes "1024x768" "800x600" "640x480" EndSubSection EndSection Section "DRI" Group 0 Mode 0666 EndSection A similar machine that still has Centos3 installed is able to start DRI on the X server while this one is not, this is the Xorg.0.log for the Centos5 machine: drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed [drm] failed to load kernel module "mach64" (II) ATI(0): [drm] drmOpen failed (EE) ATI(0): [dri] DRIScreenInit Failed (II) ATI(0): Largest offscreen areas (with overlaps): (II) ATI(0): 1024 x 1279 rectangle at 0,768 (II) ATI(0): 768 x 1280 rectangle at 0,768 (II) ATI(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles Indirect CPU to Screen color expansion Solid Lines Offscreen Pixmaps Setting up tile and stipple cache: 32 128x128 slots 10 256x256 slots (==) ATI(0): Backing store disabled (==) ATI(0): Silken mouse enabled (II) ATI(0): Direct rendering disabled (==) RandR enabled I also tried using EXA instead of XAA and setting: Option "AccelMethod" "XAA" Option "XAANoOffscreenPixmaps" "true" uname -a Linux sir5.erg.inpe.br 2.6.18-128.7.1.el5 #1 SMP Mon Aug 24 08:20:55 EDT 2009 i686 i686 i386 GNU/Linux rpm -qa | grep xorg-x11-server xorg-x11-server-utils-7.1-4.fc6 xorg-x11-server-sdk-1.1.1-48.52.el5 xorg-x11-server-Xvfb-1.1.1-48.52.el5 xorg-x11-server-Xnest-1.1.1-48.52.el5 xorg-x11-server-Xorg-1.1.1-48.52.el5 The drmOpenDevice error continues when using the suggested Option "AIGLX" "true".

  Read the article

• Bad sectors, S.M.A.R.T., SpinRite, firmware on platter and drive id questions.

  - by Christopher Galpin

  Is it possible for S.M.A.R.T. to give false readings (say I was fiddling with lots of recovery programs, transfers, so on and so forth) or is it absolutely a read-only direct correlation to the physical status of a drive? Does SpinRite level 5 "recover bad sectors" operate on those marked at the factory? Are they on the same level as your generic bad sector, with SpinRite thus having full access? (Also I'm curious if SMART's bad sector count is zero'd afterward or if it includes factory marked sectors.) The main firmware of some drives, like a WD Passport is stored on the platter. How is it protected? Is it through marking them as bad sectors? If so, I'm wondering if SpinRite's sector recovery could bring about firmware corruption on these drives. Is the failure of a drive to report valid identity information (hdparm -I /dev/xx) consistent with corrupted firmware, or just general disk failure? I may be misunderstanding the role of firmware here. I feel I've read a drive's identity information is on the platter, just like the partition tables and so on. Is this true? (Apologizes if this is more appropriate for SuperUser.)

  Read the article

• Amazon CloudFront and EC2: Global Load Balancing

  - by Matt Rogish

  We have an app that is going to store and serve up a decent amount of data in S3 to a global audience where latency should be minimized. So, we've been doing tests with Amazon CloudFront and have seen favorable results. However, we need a thin middleware layer (to do security etc.) and we'd like to put that in EC2. Due to security restrictions, this middleware layer will do the file streaming from S3/CloudFront: S3/CloudFront - EC2 - Clients We can geographically distribute the EC2 nodes (US East/West, and Ireland) but the problem is that a client in the EU would hit our US server and be fed data from there, thus rendering much of the performance benefit of CloudFront moot. I've been digging through the EC2 docs but I can't find a built-in way to get a geographically distributed version of EC2 a la CloudFront. Elastic Load Balancing sounds like the way to go, but I can't seem to find a way with that to direct based on routing... Preferably, we'd like to keep the amount of stuff outside of EC2/S3/etc. to a minimum (for obvious reasons). Any ideas how to do that within the EC2/S3 framework? DNS/routing tricks? Thanks!

  Read the article

• Thin client - cloud machine - to run via iPad, iPhone, most Androids etc

  - by Carl Lindberg

  I'm tired of having a laptop macbook that breaks down or having files that I need to sync via dropbox etc all the time via the machines to different OS installations. It sucks. I want a thin client where I can login on any machine - my iPhone, PC desktop, iPad etc to one running machine. I would like to replace a modernly powerful desktop iMac with a thin client running via my iPad. I will connect the iPad with a keyboard/mouse too so you get the idea. But I want to be able to use some of the Android phones as well (I guess most Android phones today has a good enough performance/resolution etc to run a thin client). Of course it has to be able to have input/output in sound. Printing can be solved by PDF/emailing etc - so no direct communication to the printer ports to USB etc is necessary. Is there such a service today? It should cost somewhere under something like $40/ month. I will run stuff like CPU heavy duty ableton for music production, xCode for making iOS apps, some games etc. And on the thin client also run virtual machines. VM of Ubuntu and Windows.

  Read the article

• PLS HLP Chrome & Internet Explorer won't connect after infected Fire Fox works.

  - by Zack

  HI Guys Please Help I am pretty New Here. I'm having problems. Cannot connect with chrome or Internet Explorer. Fire Fox works fine. It seems it happens when I was infected by a "Trojan Horse Generic 17.BWIK" and a "Trojan Horse SHeur.UHL", when I reply to a post for a Thread I posted. I have removed the treat and got Fire Fox working, "so i think", but not G'Chrome or IE still cannot connect. I do not want to loose Chrome History so re-setting would be my last option and uninstall and install will be out of the question. Is there a way around this? I am using XP Pro on a desktop and DSL connection. Be aware from "Fake_Antispyware.FAH", which I had on my computer, I just found out while doing this, according to my AVG anti-virus security. Please can you direct me for a cure. Thank you in advance for your sincere willingness contributions.

  Read the article

• Running a VM off a USB 2.0 Flash Drive - Mac/Parallels/XP

  - by geerlingguy

  I use a MacBook Air as my primary machine, and the 128GB SSD means space is precious. To save about 10 GB, I've been running Parallels with a Windows XP VM off an external USB hard drive, which performs as well in everyday use as running the VM off the internal SSD. So, I bought a tiny 32GB USB 2.0 flash drive, plugged it into the MacBook Air, formatted it first as ExFAT (which was slow), then as Mac OS Extended (Journaled) (which was also slow), and copied over my VM file, and ran Parallels off it. My full experience is documented here: http://www.midwesternmac.com/blogs/jeff-geerling/running-windows-xp-vm Straight file copies are really fast — 30 MB/sec read (solid the whole time), and 10-11 MB/sec write (solid the whole time). But I noticed that once XP started running, the disk access rates were in the low KB ranges. Are USB flash drives really that poor at random access, or could I possibly be missing something (the format of the flash drive, etc.?)? Of note, I've tried the following, to no great effect: Formatting the drive as either ExFAT or Mac OS Extended (Journaled) Unplugging all other USB devices and turning off Bluetooth (which runs on the right-side-port USB bus). Plugging in the flash drive either direct in the right side port, or the left side port, or into a USB 2.0 hub

  Read the article

• Passive FTP Server Port Configuration Troubles Win2003

  - by Chris

  Win2003 Ports 20 & 21 are open IIS6 - Direct Metabase Edit enabled Configured FTP service passive range to 5500-5550 5500-5550 added to windows firewall iisreset and double checked by restarting ftp service nothing has changed, when I connect and enter passive, it still hangs when ever I try to LIST or transfer files. Active is just as useless. Microsoft Windows [Version 6.1.7600] Copyright (c) 2009 Microsoft Corporation. All rights reserved. C:\Users\user>ftp ftp> open x.x.x.x Connected to x.x.x.x. 220-Microsoft FTP Service xxxxxxxxxxxxxxxxxx 220 xxxxxxxxxxxxxxxxxx User (x.x.x.x:(none)): user 331 Password required for user. Password: 230-YOUR ACTIVITY IS BEING RECORDED TO THE FULLEST EXTENT 230 User user logged in. ftp> QUOTE PASV 227 Entering Passive Mode (82,19,25,134,21,124) ftp> ls 200 PORT command successful. 150 Opening ASCII mode data connection for file list. and it hangs.. Now I can see from microsooft documentation that on newer windows releases, additional steps such as these are suggested, but they dont work on 2003... netsh advfirewall firewall add rule name=”FTP Service” action=allow service=ftpsvc protocol=TCP dir=in netsh advfirewall set global StatefulFTP disable is there anything I am missing, what is this StatefulFTP malarkey at the end EDIT I can connect and transfer binary files using WinSCP client - Therefore the problem must be with my ftp commands no? Can anyone see anything wrong with my windows ftp client example? why would it hang on ls, i tried QUOTE LIST as well, and that just hangs, and the windows ftp client doesnt work in active, it hangs if I try to go "binary" then put - This worked before I added 5500-5550 on the router. I have since added this range to the router but no difference to the windows ftp client.

  Read the article

• One Comcast Business Gateway, One Router, Two Web Servers

  - by Kevin Scheidt

  I have a Comcast business account with a router and a web server (info) attached. behind the router there are multiple computers and a second web server (info) which also serves as a file server. (info) has two nics in it. One direct to comcast and one connected to the router. It needs to serve the world it's websites. It needs however, to also be able to see all the internal computers and (com)'s served files. With just 1 nic (the one connected to the router, not comcast), (info) works fine but no one outside can see it. (com) services port 80 and (info) needs to handle port 80 as well. I have two domain names registered, and 5 static ip's from comcast. right now h t t p: / /www.graceamazing.com handled by (com) works fine and h t t p: / /www.graceamazing.com:1307 handled by (info) works fine. but as soon as I enable the 2nd nic in (info) h t t p: / /www.graceamazing.info runs extremely slow (Horribly slow). however, h t t p: / /www.graceamazing.com:1307 and .com work fine. (com) has an ip address via the router 70.89.233.41 (info) has a ip addy of 70.89.233.46 via comcast (2nd nic) and a internal ip of 192.168.x.100 via static behind the router. Any suggestions or changes to make that will make h t t p: / /www.graceamazing.info perform with the same speed it has when going through h t t p: / /graceamazing.com:1307 is there a setting I should check / could have misssed?

  Read the article

• What is the fastest and best way to convert an rmvb video to mp4/mkv without losing any quality?

  - by Eric Leung

  the file will be played in a popbox3d. my old method was to convert the video using vidcoder (an offshoot of handbrake) using normal settings, but i've recently confirmed that this significantly reduces video and audio quality. i bumped up the conversion quality to 'high profile' and this produced a higher quality video but raised the conversion time to about twice the video length (95 minutes to convert a 45 minute video) on a core2duo laptop. this is less than ideal when a large number of videos need to be converted. i have tried a direct remuxing using mkv toolnix but this produced a video that refused to display video on the popbox3d, which is consistent with the reported: [quote=other old thread] it is possible to put RealMedia A/V in MKV container (used MKVtoolnix) - however, it is awkward to play later. RV40 is only suspected to be based on H.264 - simplify, is not consistent with MPEG-4 AVC specification. [/quote] i have read that ... [quote=from old thread] Under normal circumstances, [ffmpeg] should convert the video to .video.mp4 and the audio to (.wav then to) .audio.mp4, then mux the video and audio into a new .mp4 file and delete the temporary video-only and audio-only files.[/quote] and i am currently attempting to discover how this is done. help? PS: i download a lot of series from asia and for some strange reason, rmvb is a really popular format over there. sometimes, it's the only format that's available. unfortunately, it's a format that is incompatible with the popbox3d, so i have to convert the files before i can watch them on my tv.

  Read the article

< Previous Page | 99 100 101 102 103 104 105 106 107 108 109 110  | Next Page >