Search Results

Search found 3695 results on 148 pages for 'failure'.

Page 103/148 | < Previous Page | 99 100 101 102 103 104 105 106 107 108 109 110  | Next Page >

  • No Outbound Internet on Windows Home Server

    - by Kyle B.
    Could someone provide some steps for me to check my internet connection on my Windows Home Server? It seems to have intermittent connectivity issues and I am unsure of how to diagnose the problem because it is a headless (no monitor, no keyboard) machine so the only way to get to the device is via remote desktop (which works fine). When connected to the machine, it doesn't pull up any microsoft.com sites and some other sites it does pull up (i.e. gmail.com) and some it doesn't (stackoverflow.com). To make matters more complicated, it has worked intermittently in the past for reasons unknown. Are there tools I can use to properly diagnose the reason for the connection failure? I can ping 127.0.0.1 just fine, I have internet working on my other router-connected machines, so I'm not sure why this one would fail. Any suggestions would be much appreciated and up-voted :) ** edit - thanks for suggestions guys, I'm going to try these tonight and will update my post. ** edit #2 - I hoping this is a more permanant fix, but I have both changed my port on the router as well as restarted the router at the same time. The internet (for the moment) appears to be working. I will be sure to try everything we have discussed should this problem persist. Thanks, Kyle

    Read the article

  • external drive enclosure -> software RAID 5?

    - by memilanuk
    Hello all, I have two older PCs on my LAN posing as 'servers'... one running FreeNAS off a USB stick using three 500GB hdds in a ZFS RAID-Z pool serving as storage for the LAN and one running Debian Lenny with an 80GB drive used as a general purpose 'tinker' box that I can ssh into, etc. Problem is that the SMART report for one of those 500GB drives in the FreeNAS box is showing some pre-failure attributes, and the whole array is a little small anyways. Rather than simply replace one 500GB drive with another 500GB drive, and have no backup of the file server, I'd like to upgrade all the drives to 2TB ones - but I have no where to store that much data in the mean while. As such, I started looking at getting a 4-bay external drive enclosure with an eSATA card for the Debian box, with the hopes of creating a RAID5 + LVM setup using those drives and backing the data up to that external drive enclosure. After the backup is done, replace the drives in the FreeNAS box and rebuild the array there and mirror the data back. Then, I'd have both the primary storage (on the FreeNAS box) and a backup (which I don't have currently) using the external drive enclosure on the Debian box. My big question is... most of these external drive boxes seem to claim support for JBOD, RAID 0, 1, 10, 5, etc. - should I presume that is simply fake RAID like many commodity mobos have, and not really usable in Linux? In that case, with all the drives hanging off the one eSATA connection, will Linux (specifically Debian Squeeze, as I plan on upgrading that box here shortly) see all four drives, or just the first one? Will I be able to configure them in a RAID5 array as desired? Thanks, Monte

    Read the article

  • openssl client authentication error: tlsv1 alert unknown ca: ... SSL alert number 48

    - by JoJoeDad
    I've generated a certificate using openssl and place it on the client's machine, but when I try to connect to my server using that certificate, I error mentioned in the subject line back from my server. Here's what I've done. 1) I do a test connect using openssl to see what the acceptable client certificate CA names are for my server, I issue this command from my client machine to my server: openssl s_client -connect myupload.mysite.net:443/cgi-bin/posupload.cgi -prexit and part of what I get back is as follow: Acceptable client certificate CA names /C=US/ST=Colorado/L=England/O=Inteliware/OU=Denver Office/CN=Tim Drake/[email protected] /C=US/ST=Colorado/O=Inteliware/OU=Denver Office/CN=myupload.mysite.net/[email protected] 2) Here is what is in the apache configuration file on the server regarding SSL client authentication: SSLCACertificatePath /etc/apache2/certs SSLVerifyClient require SSLVerifyDepth 10 3) I generated a self-signed client certificate called "client.pem" using mypos.pem and mypos.key, so when I run this command: openssl x509 -in client.pem -noout -issuer -subject -serial here is what is returned: issuer= /C=US/ST=Colorado/O=Inteliware/OU=Denver Office/CN=myupload.mysite.net/[email protected] subject= /C=US/ST=Colorado/O=Inteliware/OU=Denver Office/CN=mlR::mlR/[email protected] serial=0E (please note that mypos.pem is in /etc/apache2/certs/ and mypos.key is saved in /etc/apache2/certs/private/) 4) I put client.pem on the client machine, and on the client machine, I run the following command: openssl s_client -connect myupload.mysite.net:443/cgi-bin/posupload.cgi -status -cert client.pem and I get this error: CONNECTED(00000003) OCSP response: no response sent depth=1 /C=US/ST=Colorado/L=England/O=Inteliware/OU=Denver Office/CN=Tim Drake/[email protected] verify error:num=19:self signed certificate in certificate chain verify return:0 574:error:14094418:SSL routines:SSL3_READ_BYTES:tlsv1 alert unknown ca:/SourceCache/OpenSSL098/OpenSSL098-47/src/ssl/s3_pkt.c:1102:SSL alert number 48 574:error:140790E5:SSL routines:SSL23_WRITE:ssl handshake failure:/SourceCache/OpenSSL098/OpenSSL098-47/src/ssl/s23_lib.c:182: I'm really stumped as to what I've done wrong. I've searched quite a bit on this error and what I found is that people are saying the issuing CA of the client's certificate is not trusted by the server, yet when I look at the issuer of my client certificate, it matches to one of the accepted CA returned by my server. Can anyone help, please? Thank you in advance.

    Read the article

  • Trouble serving vhosts when trying to set up wildcard subdomains with dnsmasq in local development e

    - by Jeremy Kendall
    I'm trying to get wildcard DNS enabled on my laptop using dnsmasq. I realize that this has been asked and answered more than once on this forum, but I can't get the solution to work for me. Steps taken so far: Installed dnsmasq Set address=/example.dev/127.0.0.1 in dnsmasq.conf Set listen-address=127.0.0.1 in dnsmasq.conf Ensured nameserver 127.0.0.1 is in /etc/resolv.conf Set prepend domain-name-servers 127.0.0.1; in /etc/dhcp3/dhclient.conf Created a vhost for example.dev Restarted apache and dnsmasq Note: example.dev is not set in /etc/hosts My vhost for example.dev <VirtualHost *:80> ServerName example.dev DocumentRoot /home/jkendall/public_html/example/public ServerAlias *.example.dev # This should be omitted in the production environment SetEnv APPLICATION_ENV development <Directory /home/jkendall/public_html/example/public> DirectoryIndex index.php AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> The setup above will server example.dev locally without any problem. It will also serve test.example.dev, but test.example.dev returns the default apache "It works!" index.html from /var/www rather than my index.php in /home/jkendall/public_html/example/public. The solution in this Server Fault thread suggests that address=/.example.dev/127.0.0.1 would resolve my problem, but when I try to use that solution, restarting dnsmasq results in a failure with the error message dnsmasq: error at line 62 of /etc/dnsmasq.conf For grins, I moved my project over to /var/www/example and modified the vhost appropriately. I got the same result as described above. At this point I'm not sure what other steps I can take to resolve the issue. Thoughts?

    Read the article

  • How to rip AVI from VOB using ffmpeg

    - by Linux Jedi
    I am trying to convert a VOB to an AVI. I have ripped an AVI from this VOB before using ffmpeg, but for some reason it's not working this time. This is what I tried: ffmpeg -sameq -acodec copy -i VTS_01_2.VOB output.avi This is the output I get: FFmpeg version 0.6.1, Copyright (c) 2000-2010 the FFmpeg developers built on Dec 29 2010 18:02:10 with gcc 4.2.1 (Apple Inc. build 5664) configuration: libavutil 50.15. 1 / 50.15. 1 libavcodec 52.72. 2 / 52.72. 2 libavformat 52.64. 2 / 52.64. 2 libavdevice 52. 2. 0 / 52. 2. 0 libswscale 0.11. 0 / 0.11. 0 [mpeg2video @ 0x101014200]mpeg_decode_postinit() failure Last message repeated 6 times Input #0, mpeg, from 'VTS_01_2.VOB': Duration: 26:30:29.20, start: 140.171311, bitrate: 90 kb/s Stream #0.0[0x1e0]: Video: mpeg2video, yuv420p, 720x480 [PAR 32:27 DAR 16:9], 9800 kb/s, 31.44 fps, 29.97 tbr, 90k tbn, 59.94 tbc Stream #0.1[0xa0]: Audio: pcm_s16be, 48000 Hz, 2 channels, s16, 1536 kb/s Output #0, avi, to 'output.avi': Metadata: ISFT : Lavf52.64.2 Stream #0.0: Video: mpeg4, yuv420p, 720x480 [PAR 32:27 DAR 16:9], q=2-31, 200 kb/s, 29.97 tbn, 29.97 tbc Stream #0.1: Audio: pcm_s16be, 48000 Hz, 2 channels, 1536 kb/s Stream mapping: Stream #0.0 -> #0.0 Stream #0.1 -> #0.1 Could not write header for output file #0 (incorrect codec parameters ?)

    Read the article

  • Acer Aspire One -- strange battery problem, charges only up to ~90%

    - by houbysoft
    I have this strange problem on the acer aspire one d250. It happened already once before, stayed for about two weeks, and then "fixed itself". The problem is as follows: the battery can't seem to get fully charged; ie the indicator is stuck at about 90% (it's probably not a software problem -- I have ArchLinux and Windows 7 installed and both report exactly the same) and it never passes that value, but it still shows the status as "charging" (I tried everything I could think of -- leaving it charging for extremely long amounts of time, doing a few complete charge-recharge cycles, removing/reinserting the battery, cleaning the connectors, even updating the BIOS, etc., and nothing helped). Also, when it is getting charged, it charges pretty fast until about 70% and then progresses extremely slowly. The battery holds the charge that appears on the battery indicator normally. Just can't get the battery to charge fully -- I can't get it past the 90%. At first I thought this would be a simple battery failure (even if the computer is not that old, about 6-7 months), but as I mentioned it happened once before, and then one day it fixed itself. I tried contacting Acer about this, but the support was not helpful, completely stupid, it seemed like they used canned responses, the usual. Any thoughts on how to fix this?

    Read the article

  • Mac Port error installing gsoap

    - by Kevin
    Hi All, I have installed Mac Ports V1.8.1 no worries. I ran sudo port -v selfupdate no worries. I ran sudo port install gsoap And get the following error message. --- Computing dependencies for gsoap --- Fetching gsoap --- Attempting to fetch gsoap_2.7.13.tar.gz from http://optusnet.dl.sourceforge.net/gsoap2 --- Verifying checksum(s) for gsoap --- Extracting gsoap --- Applying patches to gsoap --- Configuring gsoap Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_gsoap/work/gsoap-2.7" && ./configure --prefix=/opt/local --enable-samples " returned error 77 Command output: checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... no checking for mawk... no checking for nawk... no checking for awk... awk checking whether make sets $(MAKE)... no checking build system type... i386-apple-darwin10.2.0 checking host system type... i386-apple-darwin10.2.0 checking whether make sets $(MAKE)... (cached) no checking for C++ compiler default output file name... configure: error: C++ compiler cannot create executables See `config.log' for more details. Error: Status 1 encountered during processing. Any ideas as to why it is failing. Regards Kevin

    Read the article

  • sql developer cannot establish connection to oracle db with listener running

    - by lostinthebits
    I am working from home and connected to my work's vpn. I have tried to connect to the work db with sql developer (the latest version and the previous version) on the following environments: mac os x 10.8.5 (with sql developer launched and installed directly on the iMac. sql developer launched and installed directly on a vm on same computer (guest Ubuntu 12.04 LTS) sql developer launched and installed directly on a vm on same computer (guest Windows 7.0 Professional) I get Status Failure Test Failed : IO Error - The Network Adapter could not establish the connection. I have read dba forums and googled and the most common suggestion is that the oracle listener is not up and running. I can conclusively say this is not the case because I have the option of using remote desktop and accessing the oracle db in question on my work computer. If the listener was down, according to my DBA, no one would be able to connect. My sysadmin and dba are stumped so I assume it is something unique to my home system. The reason I do not want to continue with the remote desktop workaround is because remote desktop has an annoying (infuriating often) lag.

    Read the article

  • Exchange DEAD! Server recovered but no users can log in

    - by erotsppa
    Yesterday we had a hardware failure and brought our exchange server down. The hardware was repaired and the server was brought back up. Windows server 2008 did the disk check upon bootup and everything was recovered. However, no users can log into their exchange account! This is true with IMAP, Exchange and OWA! All three of them, refused to accept any users. For example when I try to access OWA, I get the following page http://pastie.org/584061 We verified that all the services are up (IMAP, POP, SMTP, IIS etc). We were able to connect to all those services with their respective ports through telnet. What could be the problem? It looks like the database cannot be mounted, from Exchange management console, when I try to mount the database it gives: Microsoft Exchange Error Failed to mount database 'Mailbox Database'. Mailbox Database Failed Error: Exchange is unable to mount the database that you specified. Specified database: SERVER\First Storage Group\Mailbox Database; Error code: MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=-528) . I read online that there is a repair utility, so I tried it. I navigated to my edb file and ran eseutil /p "Mailbox Database.edb". It printed the following output *Repair completed. Database corruption has been repaired! Note: It is recommended that you immediately perform a full backup of this database. If you restore a backup made before the repair, the database will be rolled back to the state it was in at the time of that backup. Operation completed successfully with 595 (JET_wrnDatabaseRepaired, Database cor ruption has been repaired) after 885.750 seconds.* However I am still unable to mount!

    Read the article

  • 554 - Sending MTA’s poor reputation

    - by Phil Wilks
    I am running an email server on 77.245.64.44 and have recently started to have problems with remote delivery of emails sent using this server. Only about 5% of recipients are rejecting the emails, but they all share the following common message... Remote host said: 554 Your access to this mail system has been rejected due to the sending MTA's poor reputation. As far as I can tell my server is not on any blacklists, and it is set up correctly (the reverse DNS checks out and so on). I'm not even sure what the "Sending MTA" is, but I assume it's my server. If anyone could shed any light on this I'd really appreciate it! Here's the full bounce message... Could not deliver message to the following recipient(s): Failed Recipient: [email protected] Reason: Remote host said: 554 Your access to this mail system has been rejected due to the sending MTA's poor reputation. If you believe that this failure is in error, please contact the intended recipient via alternate means. -- The header and top 20 lines of the message follows -- Received: from 79-79-156-160.dynamic.dsl.as9105.com [79.79.156.160] by mail.fruityemail.com with SMTP; Thu, 3 Sep 2009 18:15:44 +0100 From: "Phil Wilks" To: Subject: Test Date: Thu, 3 Sep 2009 18:16:10 +0100 Organization: Fruity Solutions Message-ID: MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_01C2_01CA2CC2.9D9585A0" X-Mailer: Microsoft Office Outlook 12.0 Thread-Index: Acosujo9LId787jBSpS3xifcdmCF5Q== Content-Language: en-gb x-cr-hashedpuzzle: ADYN AzTI BO8c BsNW Cqg/ D10y E0H4 GYjP HZkV Hc9t ICru JPj7 Jd7O Jo7Q JtF2 KVjt;1;YwBoAGEAcgBsAG8AdAB0AGUALgBoAHUAbgB0AC0AZwByAHUAYgBiAGUAQABzAHUAbgBkAGEAeQAtAHQAaQBtAGUAcwAuAGMAbwAuAHUAawA=;Sosha1_v1;7;{F78BB28B-407A-4F86-A12E-7858EB212295};cABoAGkAbABAAGYAcgB1AGkAdAB5AHMAbwBsAHUAdABpAG8AbgBzAC4AYwBvAG0A;Thu, 03 Sep 2009 17:16:08 GMT;VABlAHMAdAA= x-cr-puzzleid: {F78BB28B-407A-4F86-A12E-7858EB212295} This is a multipart message in MIME format. ------=_NextPart_000_01C2_01CA2CC2.9D9585A0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit

    Read the article

  • How To Set Up A Loadbalanced High-Availability Apache Cluster On Windows

    - by bReAd
    Setting up a two-node Apache web server cluster that provides high-availability. In front of the Apache cluster we create a load balancer that splits up incoming requests between the two Apache nodes. Because we do not want the load balancer to become another “Single Point Of Failure”, we must provide high-availability for the load balancer, too. Therefore our load balancer will in fact consist out of two load balancer nodes that monitor each other using heartbeat, and if one load balancer fails, the other takes over silently. The following setup is proposed: Apache node 1: webserver1.example.com (webserver1) – IP address: 192.168.0.101; Apache document root: /var/www Apache node 2: webserver2.example.com (webserver2) – IP address: 192.168.0.102; Apache document root: /var/www Load Balancer node 1: loadb1.example.com (loadb1) – IP address: 192.168.0.103 Load Balancer node 2: loadb2.example.com (loadb2) – IP address: 192.168.0.104 Virtual IP Address: 192.168.0.105 (used for incoming requests) Currently, there are many solutions for Linux machines and there aren't any on windows. I've tried searching a long time for solutions on Windows platform How do I create the virtual IP in windows and perform monitoring and make the load balancer listen to the virtual IP Address?

    Read the article

  • How do I use a self encrypting drive?

    - by Unique_Key
    I recently purchased a Micron RealSSD c400 self encrypting drive, and I am having a few issues when trying to get it recognized by my laptop (HP Elitebook 8440p running Windows 7 x64; also tried on a custom-built desktop). When I try to initialize the drive from disk management, I get a CRC error; also, when attempting to partition it from Windows setup, the program can't create the partitions. I also tried with UBCD, nothing. I assume this is due to drive security, but I haven't been able to find much information about this online; do I need a management software or something? I'm completely stumped here. EDIT As requested, when I try partitioning the device from Windows setup I get a 0x80300024 error; when I try initializing it from disk management, I get a "Data error (cyclic redundancy check)" message, and the event log shows the following under System: Source: VDS Basic Provider, message: unexpected failure. error code 490@01010004 (2x) Source: Virtual Disk Service, message: VDS fails to write boot code on a disk during clean operation. Error code: 80070001@02070008 (1x) Source: Disk, message: The device \Device\Harddisk2\DR2 has a bad block (2x) The security logs show nothing related. Also, when attempting to configure it from UBCD (utility: HDAT2), I get an error along the lines of "can't edit partition information" or something to that tune.

    Read the article

  • Mirror a RAID0 volume

    - by Ghostrider
    I have two SSD running in RAID0. The capacity and speed are just great. I use Windows Home Server to do incremental daily backups. This is fine and well and I've successfully restored from these backups. However. When one of the disks physically died. I was stuck without a working system until the replacement arrives so that I can restore the array from backup. WHS restoration takes about 5 hours which basically means that I'm losing entire day for the process. Is it possible to set up kind of a recovery volume for the RAID array? Use a single mechanical HDD that would be updated with the exact clone of the RAID array on a daily basis. This way if the array goes offline for some reason, I can just boot from the mechanical HDD, lose some perf but will still be able to work. The machine in question runs Windows 7. Creating RAID01 is not an option because of the high price of the SSD and the fact that it still doesn't protect against failure of RAID controller. Is there any way it can be set up?

    Read the article

  • Ubuntu server PPTPD with OS X clients Problems

    - by Nakedsteve
    I'm trying to get a PPTP server running on a ubuntu server, but I've run into some issues with it. I followed this guide on how to set up pptpd on my server, and everything went smooth, but when I try to connect with my mac, it gives me this error: Here's my configuration: Does anyone have any idea as to what I'm doing wrong here? Update: Here's what the pptpd.log has to say about it: steve@debian:~$ sudo tail /var/log/pptpd.log sudo: unable to resolve host debian Sep 3 21:46:43 debian pptpd[2485]: MGR: Manager process started Sep 3 21:46:43 debian pptpd[2485]: MGR: Maximum of 11 connections available Sep 3 21:46:43 debian pptpd[2485]: MGR: Couldn't create host socket Sep 3 21:46:43 debian pptpd[2485]: createHostSocket: Address already in use Sep 3 21:46:56 debian pptpd[2486]: CTRL: Client 192.168.1.101 control connection started Sep 3 21:46:56 debian pptpd[2486]: CTRL: Starting call (launching pppd, opening GRE) Sep 3 21:46:56 debian pptpd[2486]: GRE: read(fd=6,buffer=204d0,len=8196) from PTY failed: status = -1 error = Input/output error, usually caused by unexpected termination of pppd, check option syntax and pppd logs Sep 3 21:46:56 debian pptpd[2486]: CTRL: PTY read or GRE write failed (pty,gre)=(6,7) Sep 3 21:46:56 debian pptpd[2486]: CTRL: Reaping child PPP[2487] Sep 3 21:46:56 debian pptpd[2486]: CTRL: Client 192.168.1.101 control connection finished My pptpd options are: asyncmap 0 noauth crtscts lock hide-password modem debug proxyarp lcp-echo-interval 30 lcp-echo-failure 4 nopix

    Read the article

  • UPS with a HP Proliant server

    - by Groo
    We placed a EATON Ellipse Max 1500 (900W) as the UPS for our HP Proliant ML350 G6. Upon first power failure (actually we only moved the UPS' input plug to a different socket), server immediatelly turned off, and the Health LED turned red and started blinking. UPS was in operation for about a week before that, with battery fully charged to 100%. Since our server's hot-plug supply is 460W, we are pretty sure we haven't overloaded it, the server was completely idle at that time (no web or win apps running except Windows Server core services). Then we tried to do the same with a different, no-name older PC (Core 2 Duo, 2Gb RAM) with a generic power supply (not sure what the power is) and it continued working when we pulled the plug out. UPS load was less than 15% (measured in the provided Eaton utility). We measured the UPS' output voltage using a smart oscilloscope and the THD of the UPS output waveform turned out to be 40%. Did you have similar experiences? Could this be a faulty UPS? Or a faulty power supply? Or some HP sensors configured to trigger too strictly? I wouldn't like replacing this UPS with the same brand, to get same results. [Edit] I also tried to do this while the server is turned off. While the UPS is working on battery, server will not start - as soon as I press the power button, Health LED starts blinking red.

    Read the article

  • Active Directory LDAP and user issues (using apache2 for svn access)

    - by CaCl
    I currently have a setup where I work that lets users use their active directory domain logins and passwords to authenticate and authorize access to Subversion. Currently I need to allow application accounts the same access. So our IT group creates application accounts in the active directory for us to use. But they want to be "secure" so they set the "Workstations Allowed" to be only a limited number of workstations. So when an application account hits the apache2 server for authentication they can't login for some reason and I'm having a heck of a time trying to debug. The error logs only show me: [Tue Apr 06 11:24:25 2010] [warn] [client 24.24.24.24] [3469] auth_ldap authenticate: user appuser13 authentication failed; URI /svn [ldap_simple_bind_s() to check user credentials failed][Invalid credentials] [Tue Apr 06 11:24:25 2010] [error] [client 24.24.24.24] user appuser13: authentication failure for "/svn": Password Mismatch I've checked the password numerous times and it appears to be correct but I can't seem to get the user to authenticate properly. Below is a snippet of the apache configuration for ldap: # Auth providers # Active Directory <AuthnProviderAlias ldap ldap1> AuthBasicProvider ldap AuthLDAPURL "ldap://dmain.company.com:389/dc=dmain,dc=company,dc=com?sAMAccountName?sub?(objectClass=*)" AuthLDAPBindDN "CN=svnuser13,OU=Application Accounts,dc=dmain,dc=teradata,dc=com" AuthLDAPBindPassword secret3 </AuthnProviderAlias> # Another set of users from a different group <AuthnProviderAlias ldap ldap2> AuthBasicProvider ldap AuthLDAPURL ldap://diffldapserver:389/dc=specialusers,dc=com?uid </AuthnProviderAlias> # Another set of users from a different group <AuthnProviderAlias file file1> AuthUserFile /var/svn/auth/htpasswd </AuthnProviderAlias> <Location /svn> DAV svn SVNPath /var/svn Satisfy Any Require valid-user AuthType Basic AuthName "SVN Repository" AuthBasicProvider ldap1 file1 ldap2 AuthzSVNAccessFile /var/svn/auth/access AuthzLDAPAuthoritative on Require valid-user </Location> Any help, like tips for debugging is appreciated!

    Read the article

  • Does water damage a fiber optic / cat5 cable

    - by chris
    One of the buildings I support recently had an adventure with a broken fire sprinkler. Lots of water everywhere. One of the "drains" the water used was the vertical risers between network closets. The cable plant in this building has bundles of cat5e as well as conduit with bundles of multimode fiber optic cables. The fiber is standard multi strand plenum rated stuff that terminates in boxes that have the patches to the switches. As far as I can tell, no water got near the ends of the cables (fiber or copper) but the conduit was saturated, and is likely still saturated because there isn't any air flow to dry the cables out. My gut reaction is that while it didn't do the cables any favors, it likely also isn't going to cause any problems. A little more reading / googling around leads me to believe that the water may cause problems down the road. Some pretty pictures so everyone knows what I'm talking about: Fiber conduit: Vertical riser, going down: Vertical riser, going up: Does anyone have any experience with this sort of damage and how to deal with it? Should we just ask the insurance adjuster to add "pull new structured cable" to the list of things to be replaced? And, if the opinion is "replace it because it'll start failing randomly over time" please include links that describe the specific failure modes, so I've got some ammo to use with the adjuster.

    Read the article

  • Requiring SSH-key Login From Specific IP Ranges

    - by Sean M
    I need to be able to access my server (Ubuntu 8.04 LTS) from remote sites, but I'd like to worry a bit less about password complexity. Thus, I'd like to require that SSH keys be used for login instead of name/password. However, I still have a lot to learn about security, and having already badly broken a test box when I was trying to set this up, I'm acutely aware of the chance of screwing myself while trying to accomplish this. So I have a second goal: I'd like to require that certain IP ranges (e.g. 10.0.0.0/8) may log in with name/password, but everyone else must use an SSH key to log in. How can I satisfy both of these goals? There already exists a very similar question here, but I can't quite figure out how to get to what I want from that information. Current tactic: reading through the PAM documentation (pam_access looks promising) and looking at /etc/ssh/sshd_config. Edit: Alternatively, is there a way to specify that certain users must authenticate with SSH keys, and others may authenticate with name/password? Solution that's currently working: # Globally deny logon via password, only allow SSH-key login. PasswordAuthentication no # But allow connections from the LAN to use passwords. Match Address 192.168.*.* PasswordAuthentication yes The Match Address block can also usefully be a Match User block, answering my secondary question. For now I'm just chalking the failure to parse CIDR addresses up to a quirk of my install, and resolving to try again when I go to Ubuntu 10.04 not too long from now. PAM turns out not to be necessary.

    Read the article

  • Postfix SASL Authentication using PAM_Python

    - by Christian Joudrey
    Cross-post from: http://stackoverflow.com/questions/4337995/postfix-sasl-authentication-using-pam-python Hey guys, I just set up a Postfix server in Ubuntu and I want to add SASL authentication using PAM_Python. I've compiled pam_python.so and made sure that it is in /lib/security. I've also added created the /etc/pam.d/smtp file and added: auth required pam_python.so test.py The test.py file has been placed in /lib/security and contains: # # Duplicates pam_permit.c # DEFAULT_USER = "nobody" def pam_sm_authenticate(pamh, flags, argv): try: user = pamh.get_user(None) except pamh.exception, e: return e.pam_result if user == None: pam.user = DEFAULT_USER return pamh.PAM_SUCCESS def pam_sm_setcred(pamh, flags, argv): return pamh.PAM_SUCCESS def pam_sm_acct_mgmt(pamh, flags, argv): return pamh.PAM_SUCCESS def pam_sm_open_session(pamh, flags, argv): return pamh.PAM_SUCCESS def pam_sm_close_session(pamh, flags, argv): return pamh.PAM_SUCCESS def pam_sm_chauthtok(pamh, flags, argv): return pamh.PAM_SUCCESS When I test the authentication using auth plain amltbXkAamltbXkAcmVhbC1zZWNyZXQ= I get the following response: 535 5.7.8 Error: authentication failed: no mechanism available In the postfix logs I have this: Dec 2 00:37:19 duo postfix/smtpd[16487]: warning: SASL authentication problem: unknown password verifier Dec 2 00:37:19 duo postfix/smtpd[16487]: warning: SASL authentication failure: Password verification failed Dec 2 00:37:19 duo postfix/smtpd[16487]: warning: localhost.localdomain[127.0.0.1]: SASL plain authentication failed: no mechanism available Any ideas? tl;dr Anyone have step by step instructions on how to set up PAM_Python with Postfix? Christian

    Read the article

  • How to repair a damage transaction log file for Exchange 2003

    - by Markus Larsson
    Hi! Yesterday we had a power failure and the UPS did not work (it has worked perfect before). Everything seem to be ok when I started all the servers again except of the mail, when I try to mount the store I get the following message: “The database files in this store are corrupted” Server: Exchange 2003 running on a Small Business Server Latest full backup: one week old Backup program: Backup Exec 9.0 This is what I have done: 1. Copy every file in the MDBDATA folder (edb, stm, log) 2. Run Eseutil /d for priv1.edb 3. Run Eseutil /p for priv1.edb (took seven hours) 4. Run Isintig –fix –test alltests, now it breaks down. Isintig fails with the following error: Isinteg cannot initiate verification process. Please review the log file for more information. The problem is that there is no log file created. 5. Giving up on this route I decide to do a restore from the backup, it fails with the following error: Unable to read the header of logfile E00.log. Error -501, and the error: Information Store (5976) Callback function call ErrESECBRestoreComplete ended with error 0xC80001F5 The log file is damaged. My conclusion is that E00.log is damage, so how can I repair it so that I can restore the database? Or should I give up and try some other route?

    Read the article

  • SharePoint Backup/Restore without stsadm

    - by Kevin
    Due to problems we found with the restore of sites/site collections using stsadm (our tasks generated from workflows were not restored), we've taken a different route for backup/restore. We plan a major customization to our SP site and want to take a backup so we can rollback in case the install fails. In our System Testing (not production) environment, we've backed up the 12 hive, the virtual dir's that the IIS points to SharePoint, and the SharePoint databases in SQL (using SQL server to do the db backups). We have custom event handlers and workflows built with Visual Studio, and deploy the dlls to the GAC as version 2 (signed and versioned in Visual Studio). So when we deploy, the GAC will contain 2 versions of the workflows - version 1 and version 2. During the deploy we use SP stsadm features to install/activate the WF's. We also go to each library and add the new, version 2 WFs. This automatically sets the version 1 WF's to "Not Allow" new instances (which is what we want) and the version 2 as active - perfect so far. When we've completed the install, we then assume a failure and attempt to restore to the same machines (SharePoint on one server, SQL on another). We start by uninstalling the version 2 WF's from the GAC, reset IIS (to clear cache of these ver. 2 WF dlls'), restore the 12-hive and virtual directory folders, then restore the SQL dbs. This is all just as manual as you read it - no stsadm here. All seems to work after our restore, it appears the restore was successful - the mods we made to column names, data changes, etc during the install are all reverted back to the original pre-install state. With one exception. When we run a workflow, it always fails and the Logs in the 12-hive indicates the WF is still trying to use the version 2 of the dll (System.IO file not found error) We think we've backed up and restored all the moving pieces of Sharepoint but we're missing something here, does anybody have any ideas why the version 2 WF dlls are still being referenced eventhough we restored all the folders and db's of SharePoint? Thanks, Kevin

    Read the article

  • Startup script for Red5 on Ubuntu 9.04

    - by user49249
    I am creating startup script for Red5 on Ubuntu. Red5 is installed in /opt/red5 Following is a working script on a CentOS Box on which Red5 is running [code] ==========Start init script ========== #!/bin/sh PROG=red5 RED5_HOME=/opt/red5/dist DAEMON=$RED5_HOME/$PROG.sh PIDFILE=/var/run/$PROG.pid # Source function library . /etc/rc.d/init.d/functions [ -r /etc/sysconfig/red5 ] && . /etc/sysconfig/red5 RETVAL=0 case "$1" in start) echo -n $"Starting $PROG: " cd $RED5_HOME $DAEMON >/dev/null 2>/dev/null & RETVAL=$? if [ $RETVAL -eq 0 ]; then echo $! > $PIDFILE touch /var/lock/subsys/$PROG fi [ $RETVAL -eq 0 ] && success $"$PROG startup" || failure $"$PROG startup" echo ;; stop) echo -n $"Shutting down $PROG: " killproc -p $PIDFILE RETVAL=$? echo [ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/$PROG ;; restart) $0 stop $0 start ;; status) status $PROG -p $PIDFILE RETVAL=$? ;; *) echo $"Usage: $0 {start|stop|restart|status}" RETVAL=1 esac exit $RETVAL [/code] What do I need to replace for Ubuntu in the above script. My Red5 is in /opt/red5/ and to start it manually I always do /opt/red5/dist/red5.sh from Ubuntu As I did not find rc.d/functions on Ubuntu on my laptop also /etc/init.d/functions I did not existed. I would like to be able to use them with service as Red hat distributions do. I checked /lib/lsb/init-functions.

    Read the article

  • Way to speed up load-balanced ssl using nginx?

    - by paulnsorensen
    So the setup for our website is 4 nodes running rails 3 and nginx 1 that all use the same GoDaddy certificate. Because we are a paid site, we have to maintain PCI-DSS compliance and thus have to use the more expensive SSL ciphers -- also we force SSL using Rack. I've recently switched over to Linode's NodeBalancer (which I've read is an HACluster), and we're not getting the performance we'd ideally like. From what I've read, it looks like terminating the SSL on the nodes using the high cipher is what is causing the poor performance, but I'd like to be thorough. Is there anything I can do? I've read about other ways to terminate the SSL before the NodeBalancer (like using stud), but I don't know enough about these solutions. We certainly don't want to do anything experimental or anything that has a single point of failure. If there really isn't anything I can do to speed up the SSL handshake, my alternative would be to support certain pages on Rails using a secure and insecure subdomain. I've found a few guides that walk through that, but my resulting question is in this situation, would it be better to have nginx handle forcing ssl on the secure subdomain instead of rails? Thanks!

    Read the article

  • PHP extension causes symbol lookup error

    - by Christian
    Dear, I installed - or better tried to - the NMCryptGate Extension for PHP on my Debian 5.0.8 server. I did this by compiling the sources which came up with no error message. Calling phpinfo() I can see the extension as enabled. BUT, whenever I try calling a method from this extension I get an error logged to the apache error log: /usr/sbin/apache2: symbol lookup error: /usr/lib/php5/20060613+lfs/nmcryptgate.so: undefined symbol: nmlistalloc What is missing? I got two packages from the software company: the php module sources and some files which should - according to their path inside the tar - go to /usr/local/bin|doc|include|lib. I moved them there without any effect. Each of these two packages has its own config file almost looking the same: \# libnmcryptgate.la - a libtool library file \# Generated by ltmain.sh - GNU libtool 1.3.4 (1.385.2.196 1999/12/07 21:47:57) \# \# Please DO NOT delete this file \# It is necessary for linking the library \# The name that we can dlopen(3) dlname='' \# Names of this library library_names='libnmcryptgate.so.1 libnmcryptgate.so libnmcryptgate.so' \# The name of the static archive old_library='' \# Libraries that this one depends upon dependency_libs=' -L. -L/usr/ssl/lib -L/usr/local/ssl/lib -L/usr/local/lib -lssl -lcrypto' \# Version information for libnmcryptgate current=1 age=0 revision=29 \# Is this an already installed library installed=yes \# Directory that this library needs to be installed in libdir='/usr/local/lib' I tried several ways to get it right: moving files, symlinking, changing configurations - always followed by restarting apache - no success. I guess I just have to move the files to the correct location or change the libdir inside the config files but meanwhile I'm totally confused by the two packages: do I need both, which config rules what, do I have to use the libdir variable? And for what? ... Anybody out there hinting me to my source of failure? Thank you in advance, regards, Christian

    Read the article

  • Repairing inconsistent pages in database

    - by Raj
    We have a SQL 2000 DB. The server crashed due to Raid array failure. Now when we run DBCC CHECKDB, we get an error that there are 27 consistency errors in 9 pages. When we run DBCC PAGE on these pages, we get this: Msg 8939, Level 16, State 106, Line 1 Table error: Object ID 1397580017, index ID 2, page (1:8404521). Test (m_freeCnt == freeCnt) failed. Values are 2 and 19. Msg 8939, Level 16, State 108, Line 1 Table error: Object ID 1397580017, index ID 2, page (1:8404521). Test (emptySlotCnt == 0) failed. Values are 1 and 0. Since the indicated index is non-clustered and is created by a unique constarint that includes 2 columns, we tried dropping and recreating the index. This resulted in the following error: CREATE UNIQUE INDEX terminated because a duplicate key was found for index ID 2. Most significant primary key is '3280'. The statement has been terminated. However running Select var_id,result_on from tests group by var_id,result_on having count(*)>1 returns 0 rows. Here is what we are planning to do: Restore a pre-server crash copy of the DB and run DBCC CHECKDB If that returns clean, then restore again with no recovery Apply all subequent TLOG backups Stop production app, take a tail log backup and apply that too Drop prod DB and rename the freshly restored DB to make it prod Start prod app Could someone please punch holes in this approach? Maybe, suggest a different approach? What we need is minimum downtime. SQL 2000 DB Size 94 GB The table that has corrupt pages has 460 Million+ rows of data Thanks for the help. Raj

    Read the article

< Previous Page | 99 100 101 102 103 104 105 106 107 108 109 110  | Next Page >