Search Results

Search found 34836 results on 1394 pages for 'off the shelf software'.

Page 103/1394 | < Previous Page | 99 100 101 102 103 104 105 106 107 108 109 110  | Next Page >

• Debian software raid 1: boot from both disk

  - by bsreekanth

  I newly installed debian squeeze with software raid.The way I did was, as also given in this thread. I have 2 HDD with 500 GB each. For each of them, I created 3 partitions (/boot, / and swap) I selected the hard drive and created a new partition table I created a new partition that was 1GB. I then specified to use the partition as a Physical Volume for RAID. and used for /boot and enabled bootable. Created another partition, which is of 480 GB, and then specified to use the partition as a Physical Volume for RAID. and used for /. Created another partion and used for swap Then RAID configuration: Through Configure RAID menu - create MD device - (2 for the number of drives, 0 for spare devices) Next select the partitions you want to be members of /dev/MD0. I selected /dev/sda1 and /dev/sdb1 (for /boot) Next select the partitions you want to be members of /dev/MD1. I selected /dev/sda6 and /dev/sdb6 (for /) And no RAID for swap partitions 'Finish Partitioning and write changes to disk' -- Finish the rest of the install like normal Everything is ok now, except I am not sure how to test my raid config. When I pull the power of the HDD, it only boots from one disk. I read in some forum that I may have to install GRUB manually on the other. In Debian Squeeze, there is no grub command. Not sure how to make my software raid bootable from both disk. Also, please comment on my steps above. Anything unusual. I configured /boot partitions of both disks to be boot=yes. Not sure whether that is ok. Thanks, Bsr

  Read the article

• Mac Book Pro and Photosohp working canvas lost off screen somewhere

  - by chris

  I seem to have a unique issue. I have a mac book pro which I often have connected to one or 2 additional monitors, and I think this is in part my issue. Cause when Im at home working with only the built in monitor and I go to open something new or existing in photoshop my canvas if you will call it that is no where to be found. I checked my display settings, its treating it as a one monitor solution. I've tried to in photoshop to bring all my windows to front, Ive tried to cascade and tile my windows, ive tried to reset my work area, and to no avail I can't for the life of me get the canvas to come to my screen so I can work with what ever I intend to work on. Anyone else have this problem or run into similar? How did you fix it?

  Read the article

• Handle Sysinternals software does not accept -c parameter

  - by Alex

  I am trying to close a handle to a locked file in Windows, using Sysinternals Handle software (http://technet.microsoft.com/en-us/sysinternals/bb896655). First I search for opened handle: handle.exe "C:\Temp" It issues me the following: Far.exe pid: 1144 type: File 2E8: C:\Temp Far.exe pid: 1144 type: File 3A8: C:\Temp Next I run handle.exe with -c parameter. However, whichever number I enter, it does not do anything. I have tried both: 1144, 2E8, 3A8 and 1144 in hex (478) as the software help says it accepts PID in hexademic. Whatever I enter, it just issues the following: Handle v3.46 Copyright (C) 1997-2011 Mark Russinovich Sysinternals - www.sysinternals.com usage: handle [[-a [-l]] [-u] | [-c <handle> [-y]] | [-s]] [-p <process>|<pid>] [name] -a Dump all handle information. -l Just show pagefile-backed section handles. -c Closes the specified handle (interpreted as a hexadecimal number). You must specify the process by its PID. WARNING: Closing handles can cause application or system instability. -y Don't prompt for close handle confirmation. -s Print count of each type of handle open. -u Show the owning user name when searching for handles. -p Dump handles belonging to process (partial name accepted). name Search for handles to objects with <name> (fragment accepted). No arguments will dump all file references. What am I doing wrong?

  Read the article

• Getting my IP off the hotmail blacklist

  - by Kai

  I got a new server with a new IP address. Apparently this IP is listed in the hotmail blacklists so that I can't send mails to hotmail users out of my webapplication. postfix/smtp[24706]: 8F31C9404B: to=<[email protected]>, relay=mx3.hotmail.com[65.55.37.88]:25, delay=0.66, delays=0.01/0/0.48/0.16, dsn=5.0.0, status=bounced (host mx3.hotmail.com[65.55.37.88] said: 550 SC-001 Unfortunately, messages from 78.47.228.xxx weren't sent. Please contact your Internet service provider since part of their network is on our block list. You can also refer your provider to http://mail.live.com/mail/troubleshooting.aspx#errors. (in reply to MAIL FROM command)) My hoster will not help me get that address removed from the blacklist. So I tried to find a way to do it on my own, but I can't find a way to ask Microsoft to remove my IP from that list. Has anyone managed to remove a falsely listed address? And if yes: how?

  Read the article

• Experiences with hosted (off-site) Microsoft Dynamics CRM?

  - by Beau

  We're currently testing Microsoft Dynamics CRM hosted by Fpweb. I've been asked by the lead on the project how we can increase the speed at which CRM pages in IE load. The delay seems reasonable to me for a virtual server located across the country. Has anyone succeeded in speeding things up with aggressive caching (i.e. a WAN accelerator) or by some other means? Do your employees complain about the speed of hosted Dynamics CRM?

  Read the article

• Windows 7 Desktop icons turned off after every reboot

  - by DrStalker

  I have a windows 7 x64 laptop, and every time I reboot all icons on my desktop are missing. I can get them back by right clicking on the desktop and selecting View - Show Desktop Icons, but I'd prefer they stayed on. Is there a setting or known problem I should be looking at to fix this?

  Read the article

• spam mail filter or ward-off

  - by zapping

  Can you please let me know on a anti-spam that can be used with qmail.

  Read the article

• Application to automate Windows software installation in a test lab

  - by Marc

  I have several test environments (hyper-V) which contain a variety of windows servers. Each machine needs periodically rolling back to a given snapshot and then re-installing with the latest version of our software to test. The software installs are quite complex MSI's with a fair few option screens. I know that the installs can be driven from the command line, passing in parameters to override the wizard options. At the simplest level I suppose I could just write a batch file to kick off each install with the required parameters, however the values that are passed in do need to change from time to time (and environment to environment) so a tool with a config file and simple GUI seems like a better idea. I think what makes it slightly more painful is the multiple environments. For example one environment might contain 4 servers and need a config file with all the server names, service endpoints etc. Another environment might be a 1-box install with all names and endpoints set to localhost. So, ideally I want to be able to store different setup configurations and use them to run all the required installers with the relevant settings against the relevant machines. Before I go off to write the thing, does anyone know of an existing, simple, free tool that will let me achieve this?

  Read the article

• Software Diagnostics Tool recommendations for Debugging a Windows 8 freeze

  - by Stuart

  I've had my HP Pavillion dv6 laptop since last November - and it has had 8GB RAM and a 256GB Crucial M4 SSD installed since the start. I use it for software development and it's had a Windows 8 RTM installation since early September. Yesterday I had to give a presentation at a customer site - so used Powerpoint for the first time since installing Win8... since that point my machine has 'frozen' every 2 hours or so after startup. There doesn't seem to be any easy to see reason behind the freeze - the system just freezes, even if I have left it idle with just a desktop there. My immediate suspicion is that the SSD is the mostly likely cause of the problem. I've looked at some of the questions on here - e.g. How do I troubleshoot hardware issues related to a computer freeze/crash? - but don't really want to start taking my laptop apart. Another suspicion is that this might be related to the WiFi adapter (Broadcom 802.11n) since I have noticed that this doesn't seem to play perfectly with things like Hyper-V in Win8. Can anyone recommend any software diagnostic tools that I can run in order to evaluate the health of the SSD or of other parts of the system? Thanks Stuart P.S. I doubt Powerpoint is the cause of this, but I may use it as an excuse never to use it again... More realistically perhaps something got damaged during travel to the customer site?

  Read the article

• Turn off forcing www.

  - by Kemo

  I have a 'clean' CentOS system with webmin, running Apache2 and BindDNS. When I try accessing the domain without www, I get instantly redirected to www.domain.name, as the Firebug Net console screenshot below displays http://pokit.etf.ba/upload/pokit141661fa46b11782745bb974d5140004.png What I need to know is; which are the most often reasons for this? If you need any more info, cfg or log files, please let me know

  Read the article

• Turn off Window Change on Hover in Mac OS X

  - by romant

  Was mucking around with OmniDazzle, and appropriately pressed every keyboard shortcut to see all the effects. Unfortunately now, when I hover over 'another' window - it comes into focus without me invoking via a click. Could someone please point me in the direction of what I changed?

  Read the article

• Boot linux off hard drive and then switch to run from usb flash disk

  - by Jesse

  I have an older laptop that I want to use as a simple media server on my home network. I would like to avoid using the internal hard drive except for booting (BIOS does NOT support booting from USB). My thought was to mirror the hard drive (currently has current install of Arch Linux) onto the flash drive and then after booting switch over to run everything from the flash drive. I read the following article about using a RAM disk (HOW-TO: Boot OS into RAM for speed and silence) but ran into problem because the USB subsystem does not seem to be initialized soon enough (I create root and home paritions on the flash disk and modified fstab to pick those - didn't work). Any thoughts?

  Read the article

• Laptop kicks other users off the wifi when it connects, then gets disconnected itself

  - by Devon

  I've got an Acer Aspire One running Linux. When I connect to my building's wifi, everything seems fine for a short period of time (I can google a few things or start downloading an Apt package), but then other devices on the network lose their IP addresses. Shortly after that, my computer also gets disconected. My computer is set to use DHCP. What causes this, and do you know how it could be fixed? Am I causing a broadcast storm?

  Read the article

• Win 7 laptop taking a long time to log on when off the domain

  - by pigeon

  I've clicked through on a few forums but unable to find a suggestion for this issue. I have a user with a HP laptop which will boot perfectly fine whilst connected to the network but at home it will take 4 minutes to log on. Some suggestions I have had is that its looking for the DNS server of the domain. Another was that it was suggested it was a roaming profile (it isn't). So hoping someone has encountered Windows 7 acting like this and has some suggestions. The other users on this domain don't have the issue and its a mix of XP and Win 7 client PCs.

  Read the article

• Dell 2970 - HP 1/8 G2 autoloader keeps falling off LSI 2032 SCSI chain

  - by middaparka

  I've a somewhat irritating problem with a Dell 2970 that has a HP 1/8 G2 autoloader (the Ultrium LTO 2 model) attached to the Dell/LSI 2032 non-RAID SCSI card. In essence, sometimes the autoloader/drive completely fails to appear on the SCSI chain (i.e.: there's neither a media changer or tape drive present within the device manager) and sometimes it appears but then subsequently disappears at a seemingly random (yet always inconvenient) time, resulting in backup failures. On most occasions, there are simply no errors logged in the system event log, but I did manage to capture a series of LSI_SCSI event ID 11 ("The driver detected a controller error on \Device\RaidPort0") errors followed by an event ID 129, ("Reset to device, \Device\RaidPort0, was issued") error during testing. I've tried two different cables, both with the same effect – sometimes the autoloader appears (for a while), sometimes it's completely absent. There's only one terminator I've tried to use, but as I've since successfully tested the autoloader on multiple occasions (albeit via a Adaptec U160 card on a different machine), my gut feel is that the issue doesn't lie with the terminator, or indeed the autoloader itself. As such, I'm just wondering if anyone has any ideas? It's most likely not relevant, but this is all under Windows SBS 2008, running Backup Exec 12.5 SBS edition (the Dell version), both fully patched. Addidtionally, the autoloader is running the latest firmware. It's been a while since I've dealt with anything SCSI, so all suggestions will be gratefully, gratefully received.

  Read the article

• I need to understand why my server turned off

  - by Dema

  Our organization was robbed and definitely it was inside job. I was set up. I work as a manager and as system administrator in this organization and everything goes against me. The only clue I have is that someone accidentally or intentionally turned of a server that is in the office indicating that some one was inside at the time that no one should be. This is the only evidence I have that can justify me.  I looked the log files and they show that the Power button was pressed. Can you help me to find out that that was not a bug or systems overheat? I will post the log files and if you will ask more I will gladly provide the information. Messages: Dec 24 21:43:14 jamx shutdown[27883]: shutting down for system halt Dec 24 21:43:15 jamx init: Switching to runlevel: 0 Dec 24 21:43:15 jamx smartd[3047]: smartd received signal 15: Terminated Dec 24 21:43:15 jamx smartd[3047]: smartd is exiting (exit status 0) Dec 24 21:43:15 jamx avahi-daemon[3015]: Got SIGTERM, quitting. Dec 24 21:43:15 jamx avahi-daemon[3015]: Leaving mDNS multicast group on interface eth0.IPv6 with address fe80::221:85ff:fe11:8221. Dec 24 21:43:15 jamx avahi-daemon[3015]: Leaving mDNS multicast group on interface eth0.IPv4 with address 82.207.41.239. Dec 24 21:43:15 jamx shutdown[27962]: shutting down for system halt Dec 24 21:43:15 jamx saslauthd[2983]: server_exit     : master exited: 2983 Dec 24 21:43:29 jamx nmbd[2921]: [2010/12/24 21:43:29, 0] nmbd/nmbd.c:terminate(58) Dec 24 21:43:29 jamx nmbd[2921]:   Got SIGTERM: going down... Dec 24 21:43:31 jamx clamd[2526]: Pid file removed. Dec 24 21:43:31 jamx clamd[2526]: --- Stopped at Fri Dec 24 21:43:31 2010 Dec 24 21:43:31 jamx clamd[2526]: Socket file removed. Dec 24 21:43:31 jamx mydns[2645]: jamx.org.ua up 9h44m48s (35088s) 117 questions (0/s) NOERROR=117 SERVFAIL=0 NXDOMAIN=0 NOTIMP=0 REFUSED=0 (100% TCP, 117 queries) Dec 24 21:43:31 jamx mydns[2645]: terminated Dec 24 21:43:34 jamx ntpd[2512]: ntpd exiting on signal 15 Dec 24 21:43:34 jamx hcid[2265]: Got disconnected from the system message bus Dec 24 21:43:35 jamx rpc.statd[2167]: Caught signal 15, un-registering and exiting. Dec 24 21:43:35 jamx portmap[28473]: connect from 127.0.0.1 to unset(status): request from unprivileged port Dec 24 21:43:35 jamx auditd[2021]: The audit daemon is exiting. Dec 24 21:43:35 jamx kernel: audit(1293219815.505:4044): audit_pid=0 old=2021 by auid=4294967295 Dec 24 21:43:35 jamx pcscd: pcscdaemon.c:572:signal_trap() Preparing for suicide Dec 24 21:43:36 jamx pcscd: hotplug_libusb.c:376:HPRescanUsbBus() Hotplug stopped Dec 24 21:43:36 jamx pcscd: readerfactory.c:1379:RFCleanupReaders() entering cleaning function Dec 24 21:43:36 jamx pcscd: pcscdaemon.c:532:at_exit() cleaning /var/run Dec 24 21:43:36 jamx kernel: Kernel logging (proc) stopped. Dec 24 21:43:36 jamx kernel: Kernel log daemon terminating. Dec 24 21:43:37 jamx exiting on signal 15 Acpid: [Fri Dec 24 21:43:14 2010] received event "button/power PWRF 00000080 00000001" [Fri Dec 24 21:43:14 2010] notifying client 2382[68:68] [Fri Dec 24 21:43:14 2010] executing action "/bin/ps awwux | /bin/grep gnome-power-manager | /bin/grep -qv grep || /sbin/shutdown -h now" [Fri Dec 24 21:43:14 2010] BEGIN HANDLER MESSAGES [Fri Dec 24 21:43:15 2010] END HANDLER MESSAGES [Fri Dec 24 21:43:15 2010] action exited with status 0 [Fri Dec 24 21:43:15 2010] completed event "button/power PWRF 00000080 00000001" [Fri Dec 24 21:43:15 2010] received event "button/power PWRF 00000080 00000002" [Fri Dec 24 21:43:15 2010] notifying client 2382[68:68] [Fri Dec 24 21:43:15 2010] executing action "/bin/ps awwux | /bin/grep gnome-power-manager | /bin/grep -qv grep || /sbin/shutdown -h now" [Fri Dec 24 21:43:15 2010] BEGIN HANDLER MESSAGES [Fri Dec 24 21:43:15 2010] END HANDLER MESSAGES [Fri Dec 24 21:43:15 2010] action exited with status 0 [Fri Dec 24 21:43:15 2010] completed event "button/power PWRF 00000080 00000002" [Fri Dec 24 21:43:34 2010] exiting

  Read the article

• 2 subnets off of 1 PC with 2 NICs

  - by Jeff

  I have a general setup I'd like to do with some IP cameras. This seems like it will work but I think I may be missing something. Our system consists of a video recorder PC connected to a switch which is connected to a number of IP cameras. I'd like to connect this system into an existing network but I want it on a different subnet. The main reason is that the cameras use a lot of bandwidth that I don't want slowing down the existing network. My idea was to install 2 NICs on the video recorder pc. 1 NIC connects to the existing network on 192.169.1.x for example, and the other NIC connect to the switch with the cameras. This NIC would be 192.168.100.x. Then we could remote to the video recorder PC with a GoToMyPC type thing for administration via the existing network. I've included a diagram of how I see this working but I'm a little fuzzy on the setup of the NICs (if this can work at all). My problem may be trying to deal with 2 subnets without a router but It really doesn't seem like it's necessary in this situation. BTW, gliffy is cool.

  Read the article

• Trusted Sites via GPO: <*.> gets left off

  - by HannesFostie

  As stated in the question title: one of our end users has to make use of a web application which requires her to add the website to trusted sites. By default, this is disabled, but after my colleague added the sites to the GPO pushing these in such form: *.domain.com it shows up as domain.com in her trusted sites. Has anyone encountered or even fixed this issue?

  Read the article

• DVD drive won't work after installing software

  - by Dan

  DVD drive was already region-free but for some reason would not play a certain DVD as it was the "wrong region". This is the first time I've played a DVD on the drive, but I've imported a lot of CDs before and they always worked fine, even CDs bought from the USA (I live in the UK). To get around this, I downloaded a piece of software called "DVD Region Killer". (Clicking the link won't start the download, so go ahead and check it.) After this, the drive isn't recognised. It won't show up in "My Computer", and when I insert a disc it will start to whir but not take action, i.e. iTunes won't recognise that I have put a CD in. In the Device Manager, the drive shows up with a caution-sign. The device status reads: Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19) Disabling, uninstalling and reinstalling does not help. Clearly the software download is the issue, but it is difficult to remove. The only files I can find in Program Files are: C:\Program Files (x86)\Elaborate Bytes\DVD Region Killer which contains a changelog and a HTML document which has no info on uninstalling. It doesn't show up on "Add or Remove Programs", or even as a background process when I press ctrl-alt-del. Apparently it has no interface as such, and can be accessed by an icon in the system tray, (see review in link) but I don't see the icon. If it helps to know, I have a Dell Inspiron running Windows 8 64-bit, and the model of the DVD drive is: MATSHITA DVD+-RW UJ8C2 Thanks in advance.

  Read the article

• Windows 2003 - logging off the Administrator account makes web applications inaccessible

  - by Saravana

  Consider a web application installed on a Windows Server 2003 SP2 machine with the admin account. The application is accessible in the server as well as in the network when at least one session of the admin account is logged in. If there are no active sessions of the admin account, the web application is not accessible via the network, nor accessible locally when logged in with another user account. What would cause the web application to be inaccessible there's no Administrator session? Please suggest anything that might help find the solution.

  Read the article

• Turn off anti-aliasing for text in MS Paint

  - by Ambo100

  I've been using Microsoft Paint for a project I've been working on many years. I started to work on the project for the first time in almost two years and I've noticed, despite using the same font, size and settings the text I create is anti-aliased. I'm using MS Paint 6.0. EDIT: I changed my NVidia Driver Settings to this, but it's not working Update: I managed to fix this by turning of cleartype, however webpages now look worse.

  Read the article

• Turn off error hiding on iis7

  - by Toby Allen

  I just installed IIS 7 on Vista, got PHP running, but I cant avoid the stupid default 500 error page if there is a problem with my php script, eg a compliation error etc. How do I set up IIS (or maybe php) to show me the error thats causing the 500 problem. Thanks

  Read the article

• Can't select hard disk off Windows 7 system image creator

  - by David

  When I try to create a system image in Windows 7 from the Control Panel (Control Panel\All Control Panel Items\Backup and Restore) I get the option to select a hard disk or a removeable disk to select, I have 2 disks and wanted to create the image on my spare one. However when I click refresh it doesn't show either of my disks but shows my CDROM under the removable disks area, anyone have this problem? Also, when I select a USB disk instead, it tries to iamge both my disks! I can't select my active Windows 7 installed disk! How pointless!

  Read the article

• Western Digital My Book not recognized by WD software

  - by Kari

  A few years ago I bought a WD My Book Pro 2. It worked fine for a while, then one of the drives failed and I sent it back to be replaced under warranty. I never got around to setting up the new one when I got it back. I finally ran out of room on my internal drive, so I tried to use the external - no go. Both drives spin up, but aren't recognized by either Disk Utility (Mac) or the WD Drive Manager. I tried on a PC as well with fresh software. Then I pulled the drives out of the enclosure (warranty is already expired) and plugged them straight into the PC. Both recognized and working 100% in RAID0. BIOS recognizes either disk as functional; Windows only sees them when both are connected due to the RAID which I can't change without the WD software. The drives that were returned to me are the "Green" drives which I've read are NOT recommended for RAID. Is it possible that this is interfering with them reading externally? Any other ideas? My main computer is a laptop so using them internally isn't an option :(

  Read the article

• Software/hardware to build video streaming server?

  - by Sasha Yanovets

  I am looking for a video streaming server solution, something like online TV server, with ability to make live broadcasts in the internet. What software could you recommend for that? What kind of hardware it should run on, should be there anything special? I am looking for a solution that could be scaled up to at least 1000 simultaneous users online with good resolution of video. I think it is good to have general answer on what direction to choose. But here more details on my specific case: I just looking for a solution almost from scratch. We have some video content that we've produced, but it is not delivered over internet yet. We do not tied to any particular vendor for now. We want to make 24 hours of steaming three 8 hour blocks with change of content every day. We want the ability to make regular live broadcasts. I guess we will need to have several options of streaming quality (low ~56 kb/s mid ~273 kb/s). Some terms just foreign to me (like play-truncation rate), if you could point out what parameters we should avare of, it would be great. Uplink to the internet is to be determined. We plan to start from something and scale up on the way. If you are already have some kind of media streaming server, just describe its configuration here (hardware, OS, software), peak number of concurrent users it serves. I think it could help people approaching this task.

  Read the article

< Previous Page | 99 100 101 102 103 104 105 106 107 108 109 110  | Next Page >