Search Results

Search found 3500 results on 140 pages for 'plug ins'.

Page 103/140 | < Previous Page | 99 100 101 102 103 104 105 106 107 108 109 110  | Next Page >

  • .NET development on a “Retina” MacBook Pro

    - by Jeff
    The rumor that Apple would release a super high resolution version of its 15” laptop has been around for quite awhile, and one I watched closely. After more than three years with a 17” MacBook Pro, and all of the screen real estate it offered, I was ready to replace it with something much lighter. It was a fantastic machine, still doing 6 or 7 hours after 460 charge cycles, but I wanted lighter and faster. With the SSD I put in it, I was able to sell it for $750. The appeal of higher resolution goes way back, when I would plug into a projector and scale up. Consolas, as it turns out, is a nice looking font for code when it’s bigger. While I have mostly indifference for iOS, I have to admit that a higher dot pitch on the iPhone and iPad is pretty to look at. So I ordered the new 15” “Retina” model as soon as the Apple Store went live with it, and got it seven days later. I’ve been primarily using Parallels as my VM of choice from OS X for about five years. They recently put out an update for compatibility with the display, though I’m not entirely sure what that means. I figured there would have to be some messing around to get the VM to look right. The combination that seems to work best is this: Set the display in OS X to “more room,” which is roughly the equivalent of the 1920x1200 that my 17” did. It’s not as stunning as the text at the default 1440x900 equivalent (in OS X), but it’s still quite readable. Parallels still doesn’t entirely know what to do with the high resolution, though what it should do is somehow treat it as native. That flaw aside, I set the Windows 7 scaling to 125%, and it generally looks pretty good. It’s not really taking advantage of the display for sharpness, but hopefully that’s something that Parallels will figure out. Screen tweaking aside, I got the base model with 16 gigs of RAM, so I give the VM 8. I can boot a Windows 7 VM in 9 seconds. Nine seconds! The Windows Experience Index scores are all 7 and above, except for graphics, which are both at 6. Again, that’s in a VM. It’s hard to believe there’s something so fast in a little slim package like that. Hopefully this one gets me at least three years, like the last one.

    Read the article

  • TSAM 11gR1

    - by todd.little
    The Tuxedo System and Application Monitor (TSAM) 11gR1 release provides powerful new application monitoring capabilities, as well as significant improvements in ease of use. The first thing users will notice is the completely redesigned user interface in the TSAM console. Based on Oracle ADF, the console is much easier to navigate, provides a Web 2.0 style interface with dynamically updating panels, and a look and feel familiar to those that have used Oracle Enterprise Manager. Monitoring data can be viewed in both tabular and graphical form and exported to Excel for further analysis. A number of new metrics are collected and displayed in this release. Call path monitoring now displays CPU time, message size, total transport time, and client address giving even more end-to-end information about a specific Tuxedo request. As well the call path display has been completely revamped to make it much easier to see the branches of the call path. The call pattern display now provides statistics on successful vs failed calls, system and application failures, and end-to-end average elapsed time. Service monitoring now displays minimum and maximum message size, CPU usage, and client address. System server monitoring now includes monitoring the SALT gateway servers to provide detailed performance metrics about those servers. Perhaps the most significant new feature is the consolidation of alert definitions and policy management. In previous versions of TSAM, some alerts were defined and checked on the monitored systems while others were defined and checked in the console. Policy management could be performed on both the monitored node via environment variable or command, as well as from the console. Now all alert definitions and policy definitions are only made using the console. For alerts this means that regardless of where the alert is evaluated it is defined in one and only one place. Thus the plug-in alert mechanism of previous releases can now be managed using the TSAM console, making SLA alert definition much easier and cleaner. Finally there is support in TSAM for monitoring rehosted mainframe applications. The newly announced Oracle Tuxedo Application Runtime for CICS and Batch can be monitored in the TSAM console using traditional mainframe views of the application such as regions. Look for a future blog entry with more details on this as well as some entries providing a glimpse of the console. TSAM gives users a single point for monitoring the performance of all of their Tuxedo applications.

    Read the article

  • ATG Live Webcast April 5: Managing Your Oracle E-Business Suite with Oracle Enterprise Manager

    - by BillSawyer
    The next ATG Live Webcast covers one of the hottest topic areas in E-Business Suite Tools and Technology: Lifecycle Management. Angelo Rosado, Product Manager, ATG Development will lead you through using Oracle Enterprise Manager 12c and the latest E-Business Suite Plug-in to manage E-Business Suite systems. You can register for the Apr. 5, 2012 event at: Managing Your Oracle E-Business Suite with Oracle Enterprise Manager The topics covered in this webcast will be: Manage your EBS system configurations Monitor your EBS environment's performance and uptime Keep multiple EBS environments in sync with their patches and configurations Create patches for your EBS customizations and apply them with Oracle's own patching tools Date:               Thursday, April 5, 2012Time:              8:00 AM - 9:00 AM Pacific Standard TimePresenter:    Angelo Rosado, Product Manager, ATG DevelopmentWebcast Registration Link (Preregistration is optional but encouraged)To hear the audio feed:   Domestic Participant Dial-In Number:            877-697-8128    International Participant Dial-In Number:      706-634-9568    Additional International Dial-In Numbers Link:    Dial-In Passcode:                                              99342To see the presentation:    The Direct Access Web Conference details are:    Website URL: https://ouweb.webex.com    Meeting Number:  597073984If you miss the webcast, or you have missed any webcast, don't worry -- we'll post links to the recording as soon as it's available from Oracle University.  You can monitor this blog for pointers to the replay. And, you can find our archive of our past webcasts and training here.If you have any questions or comments, feel free to email Bill Sawyer (Senior Manager, Applications Technology Curriculum) at BilldotSawyer-AT-Oracle-DOT-com. 

    Read the article

  • Introducing Glimpse – Firebug for your server

    - by Neil Davidson
    Here at Red Gate, we spend every waking hour trying to wow .NET and SQL developers with great products.  Every so often, though, we find something out in the wild which knocks our socks off by taking “ingeniously simple” to a whole new level.  That’s what a little community led by developers Nik Molnar and Anthony van der Hoorn has done with the open source tool Glimpse. Glimpse describes itself as ‘Firebug for the server.’  You drop the NuGet package into your ASP.NET project, and then — like magic* — your web pages will bare every detail of their execution.  Even by our high standards, it was trivial to get running: if you can use NuGet, you’re already there. You get all that lovely detail without changing any code. Our feelings go beyond respect for the developers who designed and wrote Glimpse; we’re thrilled that Nik and Anthony have come to work for Red Gate full-time. They’re going to stay in control of the project and keep doing open source development work on Glimpse.  In the medium term, we’re hoping to make paid-for products which plug into the free open source framework, especially in areas like performance profiling where we already have some deep technology.  First, though, Glimpse needs to get from beta to a v1. Given the breakneck pace of new development, this should only be a month or so away. Supporting an open source project is a first for Red Gate, so we’re going to be working with Nik and Anthony, with the Glimpse community and even with other vendors to figure out what ‘great’ looks like from the a user perspective.  Only one thing is certain: this technology deserves a wider audience than the 40,000 people who have already downloaded it, so please have a look and tell us what you think. You can hear more about what the Glimpse developers think on the Glimpse blog, and there are plenty more technical facts over at our product manager’s blog. If you have any questions or queries, please tweet with the #glimpse hashtag or contact the Glimpse team directly on [email protected]. [*That’s ”magic” in the Arthur C. Clarke “sufficiently advanced technology” sense, of course] Neil Davidson co-founder and Joint CEO Red Gate Software http://twitter.com/neildavidson    

    Read the article

  • Graphics card fan is loud (additional graphics card drivers cause problems)

    - by tk4muffin
    Okay this explanation is a bit longer ... but I start at the beginning: I've been using Windows 7 for a very long time, shortly after the release of v12.10 I installed Ubuntu via Windows installer. Everything worked fine but the fan of the graphics card. After a bit of research I found out, that I just had to select a different driver (nvidia-current (proprietary, tested) worked pretty well). This also fixed some graphical bugs when I just logged into my account. Due to my university I got a MSDNAA-Account (allows me to download every Windows OS for free). I downloaded and installed Windows 8. After configuration I installed ubuntu via the Windows installer once again and the first couple launches of ubuntu went well. Suddenly ubuntu didn't launched anymore...caused by some hard-disk errors and had no clue what to do. So I kept working on Windows 8 - unfortunately. After playing around with the new Windows, I put my PC to sleep-mode. I couldn't wake my PC up and it wasn't responding to anything (neither mouse-movement, -clicks or keyboard strokes, nor the power-button and the reset-button worked), so I pulled the plug. Turns out, this was a huge mistake. Somehow the BIOS broke and after restarting a couple of times, the BIOS repaired itself. Neither Windows 8, nor ubuntu where bootable. Now I had to install ubuntu several times, because after rebooting unity was hidden and I didn't know what the problem was and how to fix it. I finally realized that this problem was caused by the graphics card driver, which I've changed to the nvidia-current (This dirver worked fine before my PC "crashed"). So I installed Windows 8 again and after a bit of usage I installed ubuntu once again (via DVD). The booting of ubuntu and windows works fine - so far. But I'm still not able to change the graphics card driver without unity hiding away after restarting the OS. The noisy fan is really disturbing my work... PC Specs: Processor: Intel Core 2 Duo COU E8400 @ 3GHz x2 Memory: 7.8 GB OS type: 64-bit Graphics Card: GeForce 9600 GT Motherboard: Asus P5Q I hope the information given are enough.

    Read the article

  • Database Developer - October 2013 issue: Download Database 12c and related products

    - by Javier Puerta
    The October issue of the Database Application Developer  newsletter is now available. The focus of this issue is on downloads of Database 12c and related products. (Full newsletter here) Get Ready to Download, Deploy and Develop for Oracle Database 12c This month we're focused on downloads. We've rounded up the top developer releases (both early adopter and BETA releases) and the articles that will help you do more with Oracle 12c. See the technical content that will help you get started. If you're ready...Away we go! — Laura Ramsey, Database and Developer Community, Oracle Technology Network Team FEATURED DOWNLOADS Download: Oracle Database 12c According Tom Kyte, the Oracle 12c version has some of the biggest enhancements to the core database since version 6 - Check it out for yourself. Download: Oracle SQL Developer 4.0 Early Adopter 2 is Here Oracle SQL Developer is a free IDE that simplifies the development and management of Oracle Database. It is a complete end-to-end development platform for your PL/SQL applications that features a worksheet for running queries and scripts, a DBA console for managing the database, a reports interface, a complete data modeling solution and a migration platform for moving your 3rd party databases to Oracle.  If you are interested in checking out this new early adopter version,Oracle SQL Developer 4.0 EA is the place to go. Download: Oracle 12c Multitenant Self Provisioning Application -BETA- The -BETA- is here. The Multitenant self provisioning Application is an easy and productive way for DBAs and Developers to get familiar with powerful PDB features including create, clone, plug and unplug.   No better time to start playing with PDBs. Oracle 12c Multitenant Self Provisioning Application. Download: New! Updates to Oracle Data Integration Portfolio Oracle GoldenGate 12c and Oracle Data Integrator 12c is now available. From Real-Time data integration, transactional change data capture, data replication, transformations....to hi-volume, high-performance batch loads, event-driven, trickle-feed integration process..its now available. Go here all the details and links to downloads...and Congratulations Data Integration Team!. Download: Oracle VM Templates for Oracle 12c Features Support for Single Instance, Oracle Restart and Oracle RAC Support for all current Oracle Database 11.2 versions as well as Oracle 12c on Oracle Linux 5 Update 9 & Oracle Linux 6 Update 4. The Oracle 12c templates allow end-to-end automation for Flex Cluster, Flex ASM and PDBs. See how the Deploycluster tool was updated to support Single Instance and the new Oracle 12c features. Oracle VM Templates for Oracle Database. Download: Oracle SQL Developer Data Modeler 4.0 EA 3 If you're looking for a datamodeling and database design tool that provides an environment for capturing, modeling, managing and exploiting metadata, it's time to check out Oracle SQL Developer Data Modeler. Oracle SQL Developer Data Modeler 4.0 EA V3 is here.

    Read the article

  • Database Developer - October 2013 issue: Download Database 12c and related products

    - by Javier Puerta
    The October issue of the Database Application Developer  newsletter is now available. The focus of this issue is on downloads of Database 12c and related products. (Full newsletter here) Get Ready to Download, Deploy and Develop for Oracle Database 12c This month we're focused on downloads. We've rounded up the top developer releases (both early adopter and BETA releases) and the articles that will help you do more with Oracle 12c. See the technical content that will help you get started. If you're ready...Away we go! — Laura Ramsey, Database and Developer Community, Oracle Technology Network Team FEATURED DOWNLOADS Download: Oracle Database 12c According Tom Kyte, the Oracle 12c version has some of the biggest enhancements to the core database since version 6 - Check it out for yourself. Download: Oracle SQL Developer 4.0 Early Adopter 2 is Here Oracle SQL Developer is a free IDE that simplifies the development and management of Oracle Database. It is a complete end-to-end development platform for your PL/SQL applications that features a worksheet for running queries and scripts, a DBA console for managing the database, a reports interface, a complete data modeling solution and a migration platform for moving your 3rd party databases to Oracle.  If you are interested in checking out this new early adopter version,Oracle SQL Developer 4.0 EA is the place to go. Download: Oracle 12c Multitenant Self Provisioning Application -BETA- The -BETA- is here. The Multitenant self provisioning Application is an easy and productive way for DBAs and Developers to get familiar with powerful PDB features including create, clone, plug and unplug.   No better time to start playing with PDBs. Oracle 12c Multitenant Self Provisioning Application. Download: New! Updates to Oracle Data Integration Portfolio Oracle GoldenGate 12c and Oracle Data Integrator 12c is now available. From Real-Time data integration, transactional change data capture, data replication, transformations....to hi-volume, high-performance batch loads, event-driven, trickle-feed integration process..its now available. Go here all the details and links to downloads...and Congratulations Data Integration Team!. Download: Oracle VM Templates for Oracle 12c Features Support for Single Instance, Oracle Restart and Oracle RAC Support for all current Oracle Database 11.2 versions as well as Oracle 12c on Oracle Linux 5 Update 9 & Oracle Linux 6 Update 4. The Oracle 12c templates allow end-to-end automation for Flex Cluster, Flex ASM and PDBs. See how the Deploycluster tool was updated to support Single Instance and the new Oracle 12c features. Oracle VM Templates for Oracle Database. Download: Oracle SQL Developer Data Modeler 4.0 EA 3 If you're looking for a datamodeling and database design tool that provides an environment for capturing, modeling, managing and exploiting metadata, it's time to check out Oracle SQL Developer Data Modeler. Oracle SQL Developer Data Modeler 4.0 EA V3 is here.

    Read the article

  • It's intellisense for SQL Server

    - by Nick Harrison
    It's intellisense for SQL Server Anyone who has ever worked with me, heard me speak, or read any of writings knows that I am a HUGE fan of Reflector.    By extension,  I am a big fan of Red - Gate   I have recently begun exploring some of their other offerings and came across this jewel. SQL Prompt is a plug in for Visual Studio and SQL Server Management Studio.    It provides several tools to make dealing with SQL a little easier for your friendly neighborhood developer. When you a query window in a database, the plugin kicks in and gathers the metadata for the database that you are in.    As you type a query, you get handy feedback like a list of tables after you type select.    You can select one of the tables, specify * and then tab to expand the select clause to include all of the columns from the selected table.    As you are building up the where clause, you are prompted by the names of columns in the selected tables. If you spend any time writing ad hoc queries or building stored procedures by hand, this can save you substantial time. If you are learning a new data model, this can greatly cut down on your frustration level. The other really cool thing here is Format SQL.   I have searched all over the place for a really good SQL formatter.    Badly formatted  SQL is so much harder to read than well formatted SQL.   Unfortunately, management studio offers no support for keeping your SQL well formatted.    There are many tools available to format your SQL.   Some work better than others.    Some don't work that well at all.   Most will give you some measure of control over how the formatted SQL looks.    SQL Prompt produces good results and is easy to configure. Sadly no tool is perfect, and what would we be without a wish list.    There are some features that I would like to see: Make it easier to paste SQL in and out of code.    Strip off string builder, etc Automate replacing hard coded values with bind variables or parameters In addition to reformatting SQL, which is a huge refactor, support for other SQL refactors would be nice.    Convert join to sub query and vice versa come to mind Wish list a side, this is a wonderful tool that easily saves me an hour or more on most weeks.

    Read the article

  • Creating the Completely Customized World Just for YOU

    - by divya.malik
    OK so not a customized world, but do you know what goes into creating that customized web store front for you? How do you get those additional offers from vendors when you call in for service or when you are browsing a storefront. This is what is has been happening behind the scenes.  When a customer calls in a contact center for service, at the end of the conversation, they are offered a new product, or service. But what just transpired was that the CRM system that was in place had routed the call to the right agent, the agent got the pop up screen with the customer information, and the call request  was handled. Then came the decision point to cross-sell and up-sell, The agent got some recommended offers that were created based on analyzed data (this data had been put into a data warehouse, modeled, profiled and rules were implemented e.g.. People with profile X like product Y).  But with this system, what happens is that analytics can be applied to a very small subset. Now comes Real Time Decisioning (RTD), this helps companies make optimal decisions in the context of transactional systems. It enables companies to improve business processes with real time intelligence on every single transaction. RTD is like a service plug-in that you put at the back of your transactional systems and that you  ping to get a recommendation.  It listens to business process flows and data moving through the process, getting all that data, processes all that you can do with that data, and gives out out various offers. It takes a process centric view of analytics rather than just a data centric view. It continuously observes and learns from ever-changing customer behavior and applies those insights to providing real-time decisions and recommendations at any customer touch point. At Oracle we define Real Time Decisioning as “ The solution that addresses a business issue faced by all organizations : how to make accurate decisions, using the most up to date information, in real time…consistently and in large volumes”. Here is a video on recommendation engines that are benefiting from real time decisioning today and see how it is helping online vendors.

    Read the article

  • Working with Reporting Services Filters – Part 3: The TOP and BOTTOM Operators

    - by smisner
    Thus far in this series, I have described using the IN operator and the LIKE operator. Today, I’ll continue the series by reviewing the TOP and BOTTOM operators. Today, I happened to be working on an example of using the TOP N operator and was not successful on my first try because the behavior is just a bit different than we find when using an “equals” comparison as I described in my first post in this series. In my example, I wanted to display a list of the top 5 resellers in the United States for AdventureWorks, but I wanted it based on a filter. I started with a hard-coded filter like this: Expression Data Type Operator Value [ResellerSalesAmount] Float Top N 5 And received the following error: A filter value in the filter for tablix 'Tablix1' specifies a data type that is not supported by the 'TopN' operator. Verify that the data type for each filter value is Integer. Well, that puzzled me. Did I really have to convert ResellerSalesAmount to an integer to use the Top N operator? Just for kicks, I switched to the Top % operator like this: Expression Data Type Operator Value [ResellerSalesAmount] Float Top % 50 This time, I got exactly the results I expected – I had a total of 10 records in my dataset results, so 50% of that should yield 5 rows in my tablix. So thinking about the problem with Top N some  more, I switched the Value to an expression, like this: Expression Data Type Operator Value [ResellerSalesAmount] Float Top N =5 And it worked! So the value for Top N or Top % must reflect a number to plug into the calculation, such as Top 5 or Top 50%, and the expression is the basis for determining what’s in that group. In other words, Reporting Services will sort the rows by the expression – ResellerSalesAmount in this case – in descending order, and then filter out everything except the topmost rows based on the operator you specify. The curious thing is that, if you’re going to hard-code the value, you must enter the value for Top N with an equal sign in front of the integer, but you can omit the equal sign when entering a hard-coded value for Top %. This experience is why working with Reporting Services filters is not always intuitive! When you use a report parameter to set the value, you won’t have this problem. Just be sure that the data type of the report parameter is set to Integer. Jessica Moss has an example of using a Top N filter in a tablix which you can view here. Working with Bottom N and Bottom % works similarly. You just provide a number for N or for the percentage and Reporting Services works from the bottom up to determine which rows are kept and which are excluded.

    Read the article

  • Crash Report in Ubuntu... hardware problem?

    - by Andrew
    Got this on my machine. I was just browsing the web on Chrome and my computer froze. I recently just built this machine. I have a feeling it is a hardware problem... Possibly one of my parts arrived broken in some way.... Starting anac(h)ronistic cron Stopping anac(h)ronistic cron Stopping cold plug devices Stopping log initial device creation Starting enable remaining boot-time encrypted block devices Starting configure network device security Starting configure virtual network devices Starting save udev log and update rules Stopping configure virtual network devices Stopping save udev log and update rules Checking battery state... Stopping System V runlevel compatibility Stopping enable remaining boot-time encrypted block devices Stopping Mount filesystems on boot 91.573384] BUG: unable to handle kernel NULL pointer dereference at (null) 91.573437] IP: [<ffffffff81313514>] strcmp+0x14/0x30 91.573470] PGD 1f7822067 PUD 1ed7a6067 PMD 0 91.573498] Oops: 0000 [#1] SMP 91.573519] CPU 3 91.573531] Modules linked in: dm_crypt bnep snd_hda_codec_realtek rfcomm bluetooth parport_pc ppdev arc4 fglrx(P) rt2800usb rt2800lib crc_ccitt rt2x00usb rt2x00lib mac0021 cfg80211 psmouse snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer send_seq_device snd joydev mac_hid mei(C) soundcore serio_raw snd_page_alloc lp parport ses enclosure usbhid hid i915 drm_kms_helper drm i2c_algo_bit mxm_umi tg_video wmi usb_storage 91.573826] 91.573837] Pid: 2297, comm: update-notifier Tainted: P C O 3.2.0-29-generic #46-Ubuntu To Be Filled By O.E.M. To Be Filled By O.E.M./Z77 Extreme4 91.573912] RIP: 0010:[<ffffffff81313514>] [<ffffffff81313514>] strcmp+0x14/0x30 91.573954] RSP: 0018:ffff8801f83f5bb8 EFLAGS: 00010246 91.573982] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 91.574019] RDX: 0000000000000069 RSI: 0000000000000000 RDI: ffff88021adb26f8 91.574056] RBP: ffff8801f83f5bb8 R08: ffff88022f2d6e80 R09: 0000000000000000 91.574093] R10: ffff88021e7dbf00 R11: 0000000000000003 R12: ffff88021c10eb40 91.574130] R13: 0000000000000000 R14: ffff88021adb26f8 R15: ffff8801f83f5d40 91.574168] FS: 00007f958cf53940(0000) GS:ffff88022f2c0000(0000) kn1GS:0000000000000000 91.574210] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 91.574240] CR2: 0000000000000000 CR3: 000000021f6d7000 CR4: 00000000000406e0 91.574277] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 91.574314] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000000 91.574351] Process update-notifier (pid: 2297, threadinfo ffff801f83f4000, task ffff880208fe2e00) 91.574397] Stack: 91.574409] ffff8801f83f5be8 ffffffff811ed509 ffff88021adb26c0 ffff88021b8b7020 91.574453] ffff88021b461c60 fffffffffffffffe ffff8801f83f5c18 ffffffff811ed61f 91.574496] ffff88021adb26c0 ffff88021b8b7020 ffff8801f83f5dc8 0000000000000001 91.574539] Call Trace: 91.574558] [<ffffffff811ed509] sysfs_find_dirent+0x59/0x110 91.574591] [<ffffffff811ed61f] sysfs_lookup+0x5f/0x110 91.574621] [<ffffffff81182745] d_alloc_and_lookup+0x45/0x90 91.574654] [<ffffffff8118fe65] ? d_lookup+0x35/0x60 91.574683] [<ffffffff811848d2] do_lookup+0x202/0x310 91.574712] [<ffffffff8118660c] path_lookupat+0x11c/0x750 91.574744] [<ffffffff81318db7] ? __strncpy_from_user+0x27/0x60 91.574778] [<ffffffff81186c71] do_path_lookup+0x31/0xc0 91.574809] [<ffffffff81187779] user_path_at_empty+0x59/0xa0 91.574842] [<ffffffff81187822] ? do_filp_open+0x42/0xa0 91.574872] [<ffffffff811877d1] user_path_at+0x11/0x20 91.574902] [<ffffffff8117c80a] vfs_fstatat+0x3a/0x70 91.574933] [<ffffffff81161cff] ? kmem_cache_free+0x2f/0x110 91.574965] [<ffffffff8117c85e] vfs_lstat+-x31/0x70 91.574993] [<ffffffff8117c9fa] sys_newlstat+0x1a/0x40 91.575022] [<ffffffff81176ee1] ? do_sys_open+0x171/0x220 91.575053] [<ffffffff8117cb1a] ? sys_readlinkat+0x7a/0xb0 91.575086] [<ffffffff81661ec2] system_call_fastpath+0x16/0x1b 91.575118] Code: 83 c1 01 40 84 ff 75 ef 5d c3 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 00 55 31 c0 48 89 e5 66 2e 0f 1f 84 00 00 00 00 00 0f b6 14 07 <3a> 14 06 75 0f 48 83 c0 01 84 d2 75 ef 31 c0 5d c3 0f 1f 00 19 91.577243] RIP [<ffffffff81313514>] strcmp+0x14/0x30 91.579314] RSP <ffff8801f83f5bb8> 91.581385] CR2: 0000000000000000

    Read the article

  • Failed 12.04 installation

    - by Rob Sayer
    I tried installing Ubuntu 12.04 today. Not an upgrade, a new installation. It didn't work. My computer specs: Computer: Compaq presario CQ-104CA OS: Windows 7 Home 64 bit CPU: AMD V140 BIOS: latest Graphics: amd m880g with ati mobility radeon hd 4250 Wireless: atheros ar9285 Internal HD:SATA I wasn't connected to the internet at the time ... I know of a number of people who have installed ubuntu unconnected and just updated later. It seemed to go normally until I got to the part where I chose to install dual boot linux/windows. Then, the screen went black and the following test appeared (I left out the [OK]'s): checking battery state starting crash report submission daemon stating cpu interrupts balancing daemon stopping system V runlevel compatibility starting configure network device security stopping configure network device security stopping cold plug devices stopping log initial device creation starting enable remaining boot-time encrypting devices starting configure network device security starting save udev log and update rules stopping save udev log and update rules stopping enable remaining boot-time encrypted block devices checking for running unattended-upgrades acpid: exiting speech-dispatcher disabled: edit /etc/default/speech-disorder At this point, the CD is ejected. Then nothing. If I press the return key, it boots Windows. I don't think that's what's supposed to happen. Thinking the cd media or dvd drive may have been faulty, I downloaded the .iso again and made a bootable USB stick, as per your instructions. This time there was no cryptic crash screen. It just booted windows. I can't find any log files it may have left. Thinking the amd64 version may have been the wrong one, I tried downloading the x86 version. Same thing, both from cd and usb drive. Note I downloaded both files twice. I doubt it was a corrupted d/l. This is supposed to be a simple, transparent install. I went to the time and trouble of looking up my devices and drivers re ubuntu beforehand, and was prepared to do some configuration, though I know someone who has the same wireless device and his worked righted out of the box. But I spent over 3 hours trying to install it with only the above to show for it.

    Read the article

  • ubuntu 13.04 recognizes usb mobile broadband modem as ethernet connection

    - by Bence Mihalka
    When I plug in my usb mobile broadband modem (ZTE MF-667), in the network manager instead of a mobile broadband connection, I get an ethernet connection, called: Ethernet Network (ZTE WCDMA Technologies MSM), which of course doesn't work. Here is my lsusb output and the relevant parts of dmesg output: lsusb: Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 0cf3:3005 Atheros Communications, Inc. AR3011 Bluetooth Bus 001 Device 004: ID 04f2:b1b9 Chicony Electronics Co., Ltd Asus Integrated Webcam Bus 001 Device 005: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader Bus 002 Device 004: ID 19d2:1405 ZTE WCDMA Technologies MSM dmesg: [ 195.328467] usb 2-1.1: new high-speed USB device number 3 using ehci-pci [ 195.423545] usb 2-1.1: New USB device found, idVendor=19d2, idProduct=1225 [ 195.423555] usb 2-1.1: New USB device strings: Mfr=3, Product=2, SerialNumber=4 [ 195.423561] usb 2-1.1: Product: ZTE WCDMA Technologies MSM [ 195.423567] usb 2-1.1: Manufacturer: ZTE,Incorporated [ 195.423572] usb 2-1.1: SerialNumber: P680A1ZTED000000 [ 195.426319] scsi7 : usb-storage 2-1.1:1.0 [ 196.425354] scsi 7:0:0:0: CD-ROM CWID USB SCSI CD-ROM 2.31 PQ: 0 ANSI: 2 [ 197.447919] usb 2-1.1: USB disconnect, device number 3 [ 197.457582] sr0: scsi3-mmc drive: 243x/186x xa/form2 cdda pop-up [ 197.457594] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 197.459058] sr 7:0:0:0: Attached scsi CD-ROM sr0 [ 197.459483] sr 7:0:0:0: Attached scsi generic sg2 type 5 [ 197.759186] usb 2-1.1: new high-speed USB device number 4 using ehci-pci [ 197.854543] usb 2-1.1: New USB device found, idVendor=19d2, idProduct=1405 [ 197.854556] usb 2-1.1: New USB device strings: Mfr=4, Product=3, SerialNumber=5 [ 197.854564] usb 2-1.1: Product: ZTE WCDMA Technologies MSM [ 197.854572] usb 2-1.1: Manufacturer: ZTE,Incorporated [ 197.854579] usb 2-1.1: SerialNumber: P680A1ZTED010000 [ 197.957739] scsi8 : usb-storage 2-1.1:1.2 [ 198.076554] cdc_ether 2-1.1:1.0 eth1: register 'cdc_ether' at usb-0000:00:1d.0-1.1, CDC Ethernet Device, 00:a0:c6:00:00:00 [ 198.076583] usbcore: registered new interface driver cdc_ether [ 198.955985] scsi 8:0:0:0: CD-ROM CWID USB SCSI CD-ROM 2.31 PQ: 0 ANSI: 2 [ 198.956797] scsi 8:0:0:1: Direct-Access ZTE MMC Storage 2.31 PQ: 0 ANSI: 2 I created the appropriate mobile broadband connection manually, but I cannot enable it in network manager, since the device is not recognized as mobile broadband. Any tips how to make it work?

    Read the article

  • Referencing a picture in another DLL in Silverlight and Windows Phone 7

    - by Laurent Bugnion
    This one has burned me a few times, so here is how it works for future reference: Usually, when I add an Image control into a Silverlight application, and the picture it shows is local (as opposed to loaded from the web), I set the picture’s Build Action to Content, and the Copy to Output Directory to Copy if Newer. What the compiler does then is to copy the picture to the bin\Debug folder, and then to pack it into the XAP file. In XAML, the syntax to refer to this local picture is: <Image Source="/Images/mypicture.jpg" Width="100" Height="100" /> And in C#: return new BitmapImage(new Uri( "/Images/mypicture.jpg", UriKind.Relative)); One of the features of Silverlight is to allow referencing content (pictures, resource dictionaries, sound files, movies etc…) located in a DLL directly. This is very handy because just by using the right syntax in the URI, you can do this in XAML directly, for example with: <Image Source="/MyApplication;component/Images/mypicture.jpg" Width="100" Height="100" /> In C#, this becomes: return new BitmapImage(new Uri( "/MyApplication;component/Images/mypicture.jpg", UriKind.Relative)); Side note: This kind of URI is called a pack URI and they have been around since the early days of WPF. There is a good tutorial about pack URIs on MSDN. Even though it refers to WPF, it also applies to Silverlight Side note 2: With the Build Action set to Content, you can rename the XAP file to ZIP, extract all the files, change the picture (but keep the same name), rezip the whole thing and rename again to XAP. This is not possible if the picture is embedded in an assembly! So what’s the catch? Well the catch is that this does not work if you set the Build Action to Content. It’s actually pretty simple to explain: The pack URI above tells the Silverlight runtime to look within an assembly named MyOtherAssembly for a file named MyPicture.jpg in the Images folder. If the file is included as Content, however, it is not in the assembly. Silverlight does not find it, and silently returns nothing. The image is not displayed. And the fix? The fix, for class libraries, is to set the Build Action to Resource. With this, the picture will gets packed into the DLL itself. Of course, this will increase the size of the DLL, and any change to the picture will require recompiling the class library, which is not ideal. But in the cases where you want to distribute pictures (icons etc) together with a plug-in assembly, well, this is a good way to have everything in the same place Happy coding, Laurent   Laurent Bugnion (GalaSoft) Subscribe | Twitter | Facebook | Flickr | LinkedIn

    Read the article

  • TFS Hosting: discountasp.net TFS

    - by Enrique Lima
    In the last month or so I have been able to test and experience first hand the offering from discountasp.net for hosted TFS 2010. This first part is a description of the setup process for the account itself and getting some additional information on what you will find through the portal on their site. Not long ago, I posted a little tidbit on hosting TFS.  Through it I also did a shameless plug to my employer, our services and the type of hosting we recommend.  So, wouldn’t me running on discountasp.net be an issue?  Actually? NO. Ok, enough rambling.  Let’s get some details here. It is a Software as a Service model.  Through it we get Source Control, Version Control, Work Item Tracking and such.  What about Build?  If your need includes Build Management and such, you may need to look at some other options.  But, still this is a great offering for those that are moving from SourceSafe.  Or organizations who have 3 to 5 developers on staff, and do not foresee getting larger anytime soon.  Can it support more than 5 developers?  Yes, but then we need to get into how are you using TFS.  Do you need more than just Basic?  For example, SharePoint and Reporting Services integration. The signup process was seamless! Very easy to follow, complete and transition to Visual Studio to start working. An email followed the signup process, it contained details on how to get to the Team Foundation Server Control Panel login.  Once there, here is what I saw after the initial setup process of naming my Team Project Collection: So, moving on … once I clicked the area to get my server info, I got the following: Then it was a matter of getting the first user in there: Then on to connecting Visual Studio to my hosted TFS. Getting the server information, and the user account created I will configure those options in Visual Studio. Using Team Explorer, I am adding a new server configuration. Once this is provided, click OK, I will be challenged for a username and password, provide them and you will land on the following screen. Then Click Close. You will now be connected to your server and Team Project Collection. Since this will likely be the first time connecting, you will have no Projects (I already have 2 going). Click Connect, and you will be back in Team Explorer. My next post in the topic will be on Creating your First Team Project and uploading a Project Template to the server.

    Read the article

  • Suggestions for getting an open source electron beam tracking code going

    - by Boaz
    I work in the field of accelerator physics and synchrotron radiation. High energy electrons circulating in large rings of magnets produce x-rays that are used for a variety of different kinds of science. Running and improving these facilities requires controlling and modelling the electron beam as it circulates in the ring. A code to model this basically requires trackers to follow the electrons through the elements (something called a symplectic integrator), and then the computation of different parameters associated with this motion. The problem with these codes is that every facility has there own. In principle the code is not so complex. And as a modelling project, one might think it has some general interest. Who doesn't want to be able to create a track in space out of magnets and watch the electrons circulate? There is a Matlab based code to do this called Accelerator Toolbox, but the creator of the code is no longer in the field. I put the code in Sourceforge under the name atcollab. The basic resource is in C- it is the set of symplectic integrators. These are available in the atcollab code here. It has been useful to put the code on Sourceforge in order to exchange code, but the community of users is quite small and most are too busy to put that much time into collaboration. So in terms of really improving the code, I don't think it has been so successful. Any piece of this picture could be recreated without that much difficulty, but overall it is a bit complex, and because each lab has their own installation with lots of add-on Matlab code, people find it hard to really work together and share code. Somehow I think we need to involve a wider community in our development, or just use some standard tools. But for that, I suppose it needs to be of some general interest. I think symplectic integrators may have some general interest. And the part about a plug-in architecture to build up the ring ought to fit other patterns. Or the other option is to just accept that this is not a problem of general interest, and work harder within our small community. Suggestions, or anecdotes of analogous experience would be appreciated.

    Read the article

  • Height Map Mapping to "Chunked" Quadrilateralized Spherical Cube

    - by user3684950
    I have been working on a procedural spherical terrain generator for a few months which has a quadtree LOD system. The system splits the six faces of a quadrilateralized spherical cube into smaller "quads" or "patches" as the player approaches those faces. What I can't figure out is how to generate height maps for these patches. To generate the heights I am using a 3D ridged multi fractals algorithm. For now I can only displace the vertices of the patches directly using the output from the ridged multi fractals. I don't understand how I generate height maps that allow the vertices of a terrain patch to be mapped to pixels in the height map. The only thing I can think of is taking each vertex in a patch, plug that into the RMF and take that position and translate into u,v coordinates then determine the pixel position directly from the u,v coordinates and determine the grayscale color based on the height. I feel as if this is the right approach but there are a few other things that may further complicate my problem. First of all I intend to use "height maps" with a pixel resolution of 192x192 while the vertex "resolution" of each terrain patch is only 16x16 - meaning that I don't have any vertices to sample for the RMF for most of the pixels. The main reason the height map resolution is higher so that I can use it to generate a normal map (otherwise the height maps serve little purpose as I can just directly displace vertices as I currently am). I am pretty much following this paper very closely. This is, essentially, the part I am having trouble with. Using the cube-to-sphere mapping and the ridged multifractal algorithm previously described, a normalized height value ([0, 1]) is calculated. Using this height value, the terrain position is calculated and stored in the first three channels of the positionmap (RGB) – this will be used to calculate the normalmap. The fourth channel (A) is used to store the height value itself, to be used in the heightmap. The steps in the first sentence are my primary problem. I don't understand how the pixel positions correspond to positions on the sphere and what positions are sampled for the RMF to generate the pixels if only vertices cannot be used.

    Read the article

  • Canonicalization issue regarding academic URL vs. blog URL

    - by user5395
    I'm sorry if what I am about to write is long-winded. I only wish to be clear. I am an academic in the scientific community. I maintain a web site for my research, teaching, and other professional activities. Until recently, the content for this site was hosted in a directory on my university department's own server. The address is of the typical form (universityname).edu/~(myusername) I decided that I wanted to use WordPress in order to host and manage my page. So I set up a WordPress.com blog and then replaced the index.html file in (universityname).edu/~(myusername) with a new one consisting of a single frame, containing the WordPress.com blog. Now when a user visits (universityname).edu/~(myusername), he or she sees the blog instead. This has been pretty nice because, even when the user clicks on links between pages or posts in the blog, the only thing showing up in the address bar of the browser is www.(universityname).edu/~(myusername), because the blog is constrained to a frame. However, the effect of this change on the search side of things has not been so kind to me. Before, when someone searched for my name in Google, the first result was always (universityname).edu/~(myusername). This is the most desirable outcome, for professional reasons. (Having my academic URL come up first suggests that I am an accredited professional, and not just some crank with a blog!) But now, Google seems to have canonicalized my web presence under the blog's WordPress.com address. It has completely forgotten about my academic URL and considers the WordPress.com address to be the best address representing me on the web. Unfortunately, WordPress.com doesn't support the canonical tag, so I can't tell the blog to advertise itself as my academic URL in the header. (It doesn't seem to help at all that I have used the WordPress.com dashboard to turn on no-indexing of the blog.) One obvious solution would be to use the departmental server to host my content again, and use a local installation of the WordPress platform. For reasons beyond my control, the platform will not be deployed on the departmental server at this time. Another solution would be to use shared hosting with WordPress.org support, because the WordPress.org platform does support the canonical tag (albeit via a plug-in). But this seems to usually require purchasing a domain name and other fees, and there is no guarantee that Google will listen to the canonical tag (it might use whatever domain name I end up with instead). Is there a way I can more cleverly integrate the WordPress.com blog into a page hosted on my department's server? Is there some PHP code I can write to retrieve the blog's contents in a way that Google won't treat as a link / "perceive" the blog? Please note: I am a PHP novice at best. I just feel there should be a simpler solution to all this, within the constraints of what I have described above. Thanks!

    Read the article

  • how do I get dual monitors to work properly in Ubuntu 11.10 on a Dell Latitude D630?

    - by wes cook
    I have spent a lot of time trying to get dual monitors to work on Ubuntu 11.10 on my Dell Latitude D630 (nVidia NVS 135m video card). - For starters, the System Displays settings app always only showed one unknown monitor, even though I had the external Acer monitor connected. - So I downloaded and installed the nVidia drivers. According to what I read I would need to only use the nVidia driver app (nVidia X Server Settings), so that's what I've done. (System Displays settings continued to only show a single monitor anyway). - nVidia settings app only showed on monitor until I changed the BIOS setting to use the onboard video for external monitor (not the dock video, which it was set to, even though I don't have a docking station). - The nVidia setting app now recognized both monitors. So, I setup the X Server display config as Separate X screen for both monitors. My laptop screen shows up as AUO 1440x900 and my external monitor as Acer E211H 1920x1080. - Everything seemed like it would work, but the external monitor was just a complete white screen. The external monitor was non-functional, even though sometimes it would show the background image - still nothing would show up over there. - So, I checked the Enable Xinerama box. - Now, after logging out and back in, the wallpaper extends to both screens but I get no taskbar at the bottom or top, no system menus, and I have to press the power button to restart or log off. - After experimenting with all the shells, the only one that shows the menus and taskbars when I log in is Gnome Classic. - This is pretty much the same symptoms as found here: How do I fix 11.10 GUI?. - So, I resign myself to the older shell. - Everything works fine until ... I unplug the external monitor ... this is a laptop after all. - Anyway, after doing some work on the road, I plug back in and I still see both screens and it's functional except, ... - Now, the laptop screen (with the taskbar and menu bar) has 4 black bars at the top that windows cannot cover. The top bar is the menu bar (with Applications, Places, the date and time and the system menu on the right). But the next 3 bars (the same height as the top menu bar) are empty and are just reducing the max size of windows on that screen. - See screenshot here: http://i39.tinypic.com/35d2kh1.png - So ... 1. How do I get rid of those extra 3 black bars? They're taking valuable screen space. 2. (less critical) How do I successfully use both screens in the Ubuntu or Ubuntu 2D shell?

    Read the article

  • MSFT new trick to promote IE9 by kill IE6 first.

    - by anirudha
    Every developer know every issue on development for IE6 whenever they know things more. they are frustrated whenever they spent time in IE6 for making application cross browser compatible. not long time ago MSFT make a campaign save IE6 you can find the reference http://blogs.msdn.com/b/anna/archive/2009/04/01/save-internet-explorer-6.aspx and the webstite is here http://www.saveie6.com/ well they really make joke see what they write on the page. well why website maked in PHP whenever they can make them in asp.net or any other technology who reflect the Microsoft technology see here  http://www.saveie6.com/compare.php High security (many updates) :- you can find IE6 is how much secure you can also read Wikipedia for know. well i can say IE6 is very easily to hack. wikipedia tell you about that here http://en.wikipedia.org/wiki/Internet_Explorer_6 and for know about the security watch here http://www.google.co.in/webhp?hl=en#sclient=psy&hl=en&site=webhp&q=ie6+security+issues Lightweight (no support for silly PNG transparency, etc) :- well they tell PNG silly but tell me about the best format on internet. their is no better option as png or SVG. More screen space thanks to no tabs:-  they tell this nonsense without think anything. if they really care about more screen space why they make tab  in 7,8,9. conclusion:- IE team make a research on how to promote IE9 better then they can beat chrome and Firefox. because IE9 not have anything good like customization , plug-in ,add-ons , personas , themes and many other thing like chrome and Firefox provided perhaps IE is outdated thing even everyone their can writing about these days that IE9 have this, have performance better then this… the main problem in IE is IE6. many developer hate them because many of their time goes for making site cross browser compatible. in 2009 they still have no blah like IE9 who they have today so they make a campaign for save IE6. the list they make is a joke. they show that everything in IE6 is perfect even everyone know the truth. they listed IE6 is high security. in 2011 their is a problem for IE9 promotion called IE6. because developer hate IE6 how they can promote IE9 very well. so destroy IE6 is only option for IE9 make promote better. so you can see they make two different different campaign and both are opposite of other. well  how we can believe in IE9. thanks for reading this post. what you thinking on it. have a idea or feedback reported them.

    Read the article

  • Tools for Enterprise Architects: OmniGraffle for iPad?

    - by pat.shepherd
    Well, I have to admit to being a bit of an Apple fan and, of course, and early adopter of gadgets and technology in general.  So, when FedEx showed up with my iPad 3G last week, I was a kid in a candy store.  One of the apps that my “buy finger” was hovering over for a while (like all of 3 days) was Omnigraffle for the iPad.  I imagined that it would be very cool to use this with a customer’s EA’s to sketch out Business, Application, Information and Technology architectures.  Instead of using the blackboard, this seemed to offer promise as a white-boarding tool with obvious benefits over a traditional white-board.  I figured I’d get a VGA adapter, plug it into the customer’s projector and off we would go with a great JAD tool.  The touch pad approach offered an additional hands-on kind of feel. So, I made the $49.99 purchase + the $29.99 VGA adapter and tried to give it a go.  Well, I was both pleasantly and unpleasantly surprised.  It is both powerful and easy to use.  There are great stencils included for shapes, software icons, Visio shapes, and even UML notation.  There is even a free-hand tool that works well.  I created some diagrams pretty quickly.   The one below was just a test and took all of 10 minuets to do. The only problem was that Onmigraffle does not recognize the VGA output, so I was stopped dead in my tracks, as it were.  My use case was as a collaborative diagramming tool with other architects, though I can still use it off line.  I called Omnigraffle and they said that VGA support is on the feature request list so, hopefully, in a short amount of time, I can use the tool as I envisioned.   Review: Criteria Result Is it fun? Yes Is it Useful? Yes Does it Show Promise? Yes Did the VGA Output Work? No File/diagram Formats PDF, Onmigraffle proprietary, image   Quick Sample:     OmniGraffle for iPad - Products - The Omni Group

    Read the article

  • Automate RAC Cluster Upgrades using EM12c

    - by HariSrinivasan
    One of the most arduous processes  in DB maintenance is upgrading Databases across major versions, especially for complex RAC Clusters.With the release of Database Plug-in  (12.1.0.5.0), EM12c Rel 3 (12.1.0.3.0)  now supports automated upgrading of RAC Clusters in addition to Standalone Databases. This automation includes: Upgrade of the complete Cluster across the nodes. ( Example: 11.1.0.7 CRS, ASM, RAC DB  ->   11.2.0.4 or 12.1.0.1 GI, RAC DB)  Best practices in tune with your operations, where you can automate upgrade in steps: Step 1: Upgrade the Clusterware to Grid Infrastructure (Allowing you to wait, test and then move to DBs). Step 2: Upgrade RAC DBs either separately or in group (Mass upgrade of RAC DB's in the cluster). Standard pre-requisite checks like Cluster Verification Utility (CVU) and RAC checks Division of Upgrade process into Non-downtime activities (like laying down the new Oracle Homes (OH), running checks) to Downtime Activities (like Upgrading Clusterware to GI, Upgrading RAC) there by lowering the downtime required. Ability to configure Back up and Restore options as a part of this upgrade process. You can choose to : a. Take Backup via this process (either Guaranteed Restore Point (GRP) or RMAN) b. Set the procedure to pause just before the upgrade step to allow you to take a custom backup c. Ignore backup completely, if there are external mechanisms already in place.  High Level Steps: Select the Procedure "Upgrade Database" from Database Provisioning Home page. Choose the Target Type for upgrade and the Destination version Pick and choose the Cluster, it picks up the complete topology since the clusterware/GI isn't upgraded already Select the Gold Image of the destination version for deploying both the GI and RAC OHs Specify new OH patch, credentials, choose the Restore and Backup options, if required provide additional pre and post scripts Set the Break points in the procedure execution to isolate Downtime activities Submit and track the procedure's execution status.  The animation below captures the steps in the wizard.  For step by step process and to understand the support matrix check this documentation link. Explore the functionality!! In the next blog, will talk about automating rolling Upgrades of Databases in Physical Standby Data Guard environment using Transient Logical Standby.

    Read the article

  • Oracle Manageability Presentations at Collaborate 2012

    - by Get_Specialized!
    Attending the Collaborate 2012 event, April 22-26th in Las Vegas, and interested in learning more about becoming specialized on Oracle Manageability? Be sure and checkout these sessions below presented by subject matter experts while your onsite. Set up a meeting or be one of the first Oracle Partners onsite to ask me, and we'll request one of the limited FREE Oracle Enterprise Manager 12c partner certification exam vouchers for you. Can't travel this year? the  COLLABORATE 12 Plug Into Vegas may be another option for you to attend from your own desk presentations like session #489 Oracle Enterprise Manager 12c: What's Changed? What's New? presented by Oracle Specialized Partners like ROLTA   Session ID Title Presented by Day/Time 920 Enterprise Manager 12c Cloud Control: New Features and Best Practices Dell Sun 9536 Release 12 Apps DBA 101 Justadba, LLC Mon 932 Monitoring Exadata with Cloud Control Oracle Mon 397 OEM Cloud Control Hands On Performance Tuning Mon 118 Oracle BI Sys Mgmt Best Practices & New Features Rittman Mead Consulting Mon 548 High Availability Boot Camp: RAC Design, Install, Manage Database Administration, Inc Mon 926 The Only Complete Cloud Management Solution -- Oracle Enterprise Manager Oracle Mon 328 Virtualization Boot Camp Dell Mon 292 Upgrading to Oracle Enterprise Manager 12c - Best Practices Southern Utah University Mon 793 Exadata 101 - What You Need to Know Rolta Tues 431 & 1431 Extreme Database Administration: New Features for Expert DBAs Oracle Tue Wed 521 What's New for Oracle WebLogic Management: Capabilities that Scripting Cannot Provide Oracle Thu 338 Oracle Real Application Testing: A look under the hood PayPal Tue 9398 Reduce TCO Using Oracle Application Management Suite for Oracle E-Business Suite Oracle Tue 312 Configuring and Managing a Private Cloud with Oracle Enterprise Manager 12c Dell Tue 866 Making OEM Sing and Dance with EMCLI Portland General Electric Tue 533 Oracle Exadata Monitoring: Engineered Systems Management with Oracle Enterprise Manager Oracle Wed 100600 Optimizing EnterpriseOne System Administration Oracle Wed 9565 Optimizing EBS on Exadata Centroid Systems Wed 550 Database-as-a-Service: Enterprise Cloud in Three Simple Steps Oracle Wed 434 Managing Oracle: Expert Panel on Techniques and Best Practices Oracle Partners: Dell, Keste, ROLTA, Pythian Wed 9760 Cloud Computing Directions: Understanding Oracle's Cloud AT&T Wed 817 Right Cloud: Use Oracle Technologies to Avoid False Cloud Visual Integrator Consulting Wed 163 Forgetting something? Standardize your database monitoring environment with Enterprise Manager 11g Johnson Controls Wed 489 Oracle Enterprise Manager 12c: What's Changed? What's New? ROLTA Thu    

    Read the article

  • ArchBeat Link-o-Rama for 2012-08-29

    - by Bob Rhubart
    ORCLville: OOW 2012 - Crystal BallOracle ACE Director Floyd Teter cooks up some tongue-in-cheek predictions for news and announcements that might come out of Oracle OpenWorld 2012. What's your prediction? Oracle Optimized Solutions at Oracle OpenWorld 2012 | Oracle Hardware Hardware matters, too! The people behind the Oracle Hardware blog have put together a list of Oracle Openworld 2012 sessions focused Oracle Optimized Solutions, "designed, pre-tested, tuned and fully documented architectures for optimal performance and availability." Just plug the session ID numbers into Schedule Builder and you're good to go. AIX Checklist for stable OBIEE deployment | Dick Dunbar "OBIEE is a complicated system with many moving parts and connection points," according to Oracle Business Inteligence escalation engineer Dick Dunbar. "The purpose of this article is to provide a checklist to discuss OBIEE deployment with your systems administrators." Demo for OPN: Coherence Management with EM Cloud Control 12c Oracle Partner Network members can check out a new Coherence Management demo that showcases some of the key capabilities of Management Pack for Oracle Coherence and JVM Diagnostics. "The demo flow showcases the key enhancements made in Enterprise Manager 12c release which includes new customizable performance summary, cache data management and configuration management," according to the WebLogic Partner Community EMEA blog. The Pragmatic Architect: To Boldly Go Where No One Has Gone Before | Frank Buschmann "Many architects have technical knowledge that's both impressive and sound, which is indeed an inevitable basis for design success," says Frank Buschmann. "Yet, a lot of software projects fail or suffer due to severe challenges in their architecture. The key to mastery is how architects approach design, what they value, and where they focus their attention and work." As retail dies, whom will be the winners? | Peter Evans-Greenwood "The problem for many retailers is that how consumers shop has changed but the the retailers haven't adapted, " says Peter Evans-Greenwood. "Their sole virtue was to be the last step in a supply chain delivering somebody else's products to the consumer. However, being the last step in the supply chain is no longer a virtue when consumers skip across channels and can reach around the globe, no longer dependant on or limited to what they can find locally." Thought for the Day "Brains require stimulation. If you're locked into a pattern of work, work, and more work, your brain soon habituates - the same way that it lets you stop hearing a clock ticking. So, if you want to be more effective at work, you must, paradoxically, be less single-minded in your devotion to work. Anything you do—anything—that stimulates new segments of your brain will make you a more effective programmer or analyst. I promise, with a money-back guarantee." — Gerald M. Weinberg Source: SoftwareQuotes.com

    Read the article

  • Black screen on latest Nvidia Cards when starting LightDM/Ubuntu

    - by Luis Alvarado
    Today I installed an Nvidia GT440 on my computer, changing the one that existed there, an Nvidia 9500GT. After changing it I started getting a problem where the screen just went black when loading the lightdm login screen (Where I punt my user and password). The thing is, if I disconnect the VGA cable and connect it again I get to see the lightdm greeter and everything works perfect. The problem is that I have to connect/disconnect every time I reboot the PC. I tried installing the 285.xx drivers. Same problem. I removed the Nvidia drivers installed with Jockey, rebooted, same problem. I install the current 280.xx again, same problem. After all that I installed a fresh install of Ubuntu, selected to install the Nvidia drivers while installing it from the livecd. After booting the same problem appeared. Dmesg does not say anything wrong about it. Same goes for the log from Jockey. What else should I check or what to do to solve it. Just to clarify, this does not happen BEFORE the lightdm greeter appears. Am guessing before the actual use of the video card with X starts with all the 2D/3D stuff that is used in ligthdm and unity. I can use any tty and even see the Ubuntu logo when starting. UPDATE: When I open a game in fullscreen the problem appears again. I have to unplug the monitor cable and plug it back in to see the game. Then when I quit the game I have to do it again to see the desktop. UPDATE 2: Today I bought a HDMI cable, connected the video card to the TV am testing it with and it actually did log in correctly without any black screen but it shows the resolution a little over the actual size of the screen. So I see only half of the launcher since the left side of it is hidden outside of the real resolution and the top bar is beyond the resolution. So the black screen is related to the VGA connection.

    Read the article

< Previous Page | 99 100 101 102 103 104 105 106 107 108 109 110  | Next Page >