solid snake - Page 103 - Developer IT

Adaptec 5805 not recognized after reboot

- by Rakedko ShotGuns

After rebooting the system, the controller is not recognized. It only works if the computer is shut down and turned off. I have recently updated the firmware to "Adaptec RAID 5805 Firmware Build 18948". How do I fix the problem? Configuration summary --------------------------- 1. Server name.....................raid_test Adaptec Storage Manager agent...7.31.00 (18856) Adaptec Storage Manager console.7.31.00 (18856) Number of controllers...........1 Operating system................Windows Configuration information for controller 1 ------------------------------------------------------- Type............................Controller Model...........................Adaptec 5805 Controller number...............1 Physical slot...................2 Installed memory size...........512 MB Serial number...................8C4510C6C9E Boot ROM........................5.2-0 (18948) Firmware........................5.2-0 (18948) Device driver...................5.2-0 (16119) Controller status...............Optimal Battery status..................Charging Battery temperature.............Normal Battery charge amount (%).......37 Estimated charge remaining......0 days, 16 hours, 12 minutes Background consistency check....Disabled Copy back.......................Disabled Controller temperature..........Normal (40C / 104F) Default logical drive task priority High Performance mode................Dynamic Number of logical devices.......1 Number of hot-spare drives......0 Number of ready drives..........0 Number of drive(s) assigned to MaxCache cache0 Maximum drives allowed for MaxCache cache8 MaxCache Read Cache Pool Size...0 GB NCQ status......................Enabled Stay awake status...............Disabled Internal drive spinup limit.....0 External drive spinup limit.....0 Phy 0...........................No device attached Phy 1...........................No device attached Phy 2...........................No device attached Phy 3...........................1.50 Gb/s Phy 4...........................No device attached Phy 5...........................No device attached Phy 6...........................No device attached Phy 7...........................No device attached Statistics version..............2.0 SSD Cache size..................0 Pages on fetch list.............0 Fetch list candidates...........0 Candidate replacements..........0 69319...........................31293 Logical device..................0 Logical device name............. RAID level......................Simple volume Data space......................148,916 GB Date created....................09/19/2012 Interface type..................Serial ATA State...........................Optimal Read-cache mode.................Enabled Preferred MaxCache read cache settingEnabled Actual MaxCache read cache setting Disabled Write-cache mode................Enabled (write-back) Write-cache setting.............Enabled (write-back) Partitioned.....................Yes Protected by hot spare..........No Bootable........................Yes Bad stripes.....................No Power Status....................Disabled Power State.....................Active Reduce RPM timer................Never Power off timer.................Never Verify timer....................Never Segment 0.......................Present: controller 1, connector 0, device 0, S/N 9RX3KZMT Overall host IOs................99075 Overall MB......................4411203 DRAM cache hits.................71929 SSD cache hits..................0 Uncached IOs....................29239 Overall disk failures...........0 DRAM cache full hits............71929 DRAM cache fetch / flush wait...0 DRAM cache hybrid reads.........3476 DRAM cache flushes..............-- Read hits.......................0 Write hits......................0 Valid Pages.....................0 Updates on writes...............0 Invalidations by large writes...0 Invalidations by R/W balance....0 Invalidations by replacement....0 Invalidations by other..........0 Page Fetches....................0 0...............................0 73..............................10822 8...............................3 46138...........................4916 27184...........................15226 20875...........................323 16982...........................1771 1563............................5317 1948............................2969 Serial attached SCSI ----------------------- Type............................Disk drive Vendor..........................Unknown Model...........................ST3160815AS Serial Number...................9RX3KZMT Firmware level..................3.AAD Reported channel................0 Reported SCSI device ID.........0 Interface type..................Serial ATA Size............................149,05 GB Negotiated transfer speed.......1.50 Gb/s State...........................Optimal S.M.A.R.T. error................No Write-cache mode................Write back Hardware errors.................0 Medium errors...................0 Parity errors...................0 Link failures...................0 Aborted commands................0 S.M.A.R.T. warnings.............0 Solid-state disk (non-spinning).false MaxCache cache capable..........false MaxCache cache assigned.........false NCQ status......................Enabled Phy 0...........................1.50 Gb/s Power State.....................Full rpm Supported power states..........Full rpm, Powered off 0x01............................113 0x03............................98 0x04............................99 0x05............................100 0x07............................83 0x09............................75 0x0A............................100 0x0C............................99 0xBB............................100 0xBD............................100 0xBE............................61 0xC2............................39 0xC3............................69 0xC5............................100 0xC6............................100 0xC7............................200 0xC8............................100 0xCA............................100 Aborted commands................0 Link failures...................0 Medium errors...................0 Parity errors...................0 Hardware errors.................0 SMART errors....................0 End of the configuration information for controller 1

Read the article

How should I use my new SSD drive?

- by jasondavis

I just built a new PC the other day. Specs... Processor: Intel i7-930 quad core CPU CPU Cooler: COOLER MASTER Hyper 212 Motherboard: AsRock X58 Extreme 3 RAM/Memory: 6gb G-Skill tripple channel DDR3 memory (3 sticks of 2gb planning to get another kit to make it 12gb total soon) Operating System Hard drive: Intel X25-M 80GB Mainstream SATA2 Solid State Drive Video Cards: 2 XFX ATI Redeon HD 4650 cards to run 3-4 monitors Case: Lian Li PC-B10 Midtower case Power Supply: Antec TruePower New TP-750 Blue 750W Operating System Windows 7 Pro 64bit Not sure if the specs are helpful at all but I posted them just in case. So I got everything put together and running great so far but I need some advice/ideas/help/tips. I got the SSD drive in hopes of using it strictly for my windows 7 install along with all my other programs I install. I am then going to get another drive or 2 just for data (video,music,photos, etc). So my plan is to just install the new data drives and then in windows 7 I will change my "My documents" "My Music" "My Video" "MY Photos" library's to be located on the data drives instead of the OS SSD drive. I would ultimately like to install all my programs with my windows install on the SSD drive and then create an IMAGE of the drive and then 6 months down the road if things are sluggish I can just wipe the drive and restore my IMAGE with all my programs and settings in tact still. So here are some questions now. 1) How can I verify that TRIM is working on my new SSD? 2) Is there anything above that I missed that I should be doing? I think I once read that there is a page file or some sort of file that windows changes a lot and that it should be moved off f an SSD an onto my data drives. DOes anyone know what I might of heard? If you do can you explain the pros and cons of doing such a thing as well as how to possibly? 3) Any tips or advice to get the best performance from all this, I built a pretty nice system and I just want to make it stay that way as long as I can.

Read the article

Windows 7 Home hangs at "Welcome" screen

- by White Phoenix

I'm asking on behalf of a friend who's currently having problems with his machine. Windows 7 Home 32-bit. He's too far away for me to help by going over to his house - I'm helping him over the Internet. This is his current machine: http://www.newegg.com/Product/Product.aspx?Item=N82E16883227134 The only two changes he made to that machine is to swap out the gfx card for a EVGA GTX 460 and the PSU for a Corsair TX650. Here's what happened: He was playing a computer game (fairly CPU/GPU intensive) and had some music going in the background in foobar while playing. Suddenly, he notices the music stopped playing, so he switches to foobar to try to close it, but it freezes up (window won't respond). So he figures it's just foobar having a bad day and force quits that program. Suddenly, his game won't respond, so he force quits that, then the entire computer just went to crap at that point, so he hits the restart button on his machine. Computer POSTS fine, but now he gets stuck at the Windows "welcome" screen (his account is set to auto-login). HD activity light is solid yellow but he doesn't hear HDD activity. He tried booting into Safe Mode - gets stuck at the "welcome screen". Tried a STartup Repair within Windows 7, it found a few problems, but still gets stuck at welcome. I advised him to boot off the DVD - sfc /scannow found nothing (couldn't use the regular /scannow option; says there's a repair pending, had to use use offbootdir/offwindir command switches). Ran startup repair 3 times - found nothing. My friend runs virus/malware scans on a regular basis, so he's fairly sure it's not that either. Right now I'm having my friend run chkdsk /R on the computer while in this Startup Recovery mode - so far it's caught a few bad sectors. However at this point I'm kinda wondering which way to go if chkdsk doesn't fix it. Quick Google search said someone had success by booting Windows with bootlogging on - some others have success with running the aforemented chkdsk, etc. The fact that Windows cannot even boot into Safe Mode concerns me. While we're waiting for chkdsk /R to finish, are there any other options I can give my friend short of reinstalling Windows 7? He has his data on a separate partition so that's not a major problem (though it'll be an annoyance for him). I suspect his hard drive may be having some issues, but my main concern is getting him back up and running before we start diagnosing the hard drive (I may have him run some sort of SMART test utility later).

Read the article

How can I reverse mouse movement (X & Y axis) system-wide? (Win 7 x64)

- by Scivitri

Short Version I'm looking for a way to reverse the X and Y mouse axis movements. The computer is running Windows 7, x64 and Logitech SetPoint 6.32. I would like a system-level, permanent fix; such as a mouse driver modification or a registry tweak. Does anyone know of a solid way of implementing this, or how to find the registry values to change this? I'll settle quite happily for how to enable the orientation feature in SetPoint 6.32 for mice as well as trackballs. Long Version People seem never to understand why I would want this, and I commonly hear "just use the mouse right-side up!" advice. Dyslexia is not something which can be cured by "just reading things right." While I appreciate the attempts to help, I'm hoping some background may help people understand. I have a user with an unusual form of dyslexia, for whom mouse movements are backward. If she wants to move her cursor left, she will move the mouse right. If she wants the cursor to move up, she'll move the mouse down. She used to hold her mouse upside-down, which makes sophisticated clicking difficult, is terrible for ergonomics, and makes multi-button mice completely useless. In olden times, mouse drivers included an orientation feature (typically a hot-air balloon you dragged upward to set the mouse movement orientation) which could be used to set the relationship between mouse movement and cursor movement. Several years ago, mouse drivers were "improved" and this feature has since been limited to trackballs. After losing the orientation feature she went back to upside-down mousing for a bit, until finding UberOptions, a tweak for Logitech SetPoint, which would enable all features for all pointing devices. This included the orientation feature. And there was much rejoicing. Now her mouse has died, and current Logitech mice require a newer version of SetPoint for which UberOptions has not been updated. We've also seen MAF-Mouse (the developer indicated the version for 64-bit Windows does not support USB mice, yet) and Sakasa (while it works, commentary on the web indicate it tends to break randomly and often. It's also just a running program, so not system-wide.). I have seen some very sophisticated registry hacks. For example, I used to use a hack which would change the codes created by the F1-F12 keys when the F-Lock key was invented and defaulted to screwing my keyboard up. I'm hoping there's a way to flip X and Y in the registry; or some other, similar, system-level tweak out there. Another solution could be re-enabling the orientation feature for mice, as well as trackballs. It's very frustrating that input device drivers include the functionality we desperately need for an accessibilty concern, but it's been disabled in the name of making the drivers more idiot-proof.

Read the article

I want to virtualize my workstation (Tier 1), Looking for Bare Metal Hypervisor for consumer grade components

- by Chase Florell

I find myself in this similar bind at least once a year. The bind whereby I'm either upgrading a motherboard, or an OS hard drive. It drives me crazy to have to reinstall Windows, Visual Studio, all my addins, reconfigure my settings etc... every single time. I have a layout and I like and I want to stick with it. My question is... Is there a Bare Metal Hypervisor on the market that will enable me to virtualize my consumer grade workstation? I really want to avoid Host/Client virtualization. Bare Metal is definitely a better way to go for my needs. Is this a good approach, or am I going to suffer some other undesirable side effects by doing this? Clarification My machine has very limited purposes. My primary use is Visual Studio 2010 Professional where I develop ASP.NET MVC Web Applications. The second piece of software that I use (that's system intensive) is Photoshop CS3. Beyond that, my applications are limited to Outlook, Internet Explorer, Firefox, Opera, Chrome, LinqPad, and various other (small) apps. Beyond this, I'm considering working on a node.js project and might run ubuntu on the same hypervisor if possible. System Specs: Gigabyte Motherboard Intel i7 920 12 GB Ram basic 500GB 7200RPM HDD for OS 4 VelociRaptors in Raid 1/0 for build disk Dual GTS250 (512MB) Graphics cards (non SLI) for quad monitors On a side note I also wouldn't be opposed to an alternative suggestion if the limitations are too great. I could install the ESXi (or Zen Server) on my box, and build a separate "thin client" to RDP into the virtual machine. It appears as though RDP supports dual monitors. Edit (Dec 9, 2011) It's been nearly a year since I first asked this question. Since then, there have been a lot of great strides in Hypervisor technology... AND MokaFive is now released for corporate use. I'd love to dig into this question a little more and find out if there is a solid BareMetal Hypervisor for workstations running consumer grade components (IE: not Dell, HP, Lenovo, Etc).

Read the article

Is there a switch that will connect directly to my modem and allow my router to serve only as a WiFi connection?

- by Abner

Details . . Devices . Internets -50Mbps Cable Internet Modem - Motorola Surfboard Extreme Router - Netgear WNDR3700v3 Switch - D-Link DGS-1008G Wired Ethernet Cable - Cat6_24Awg_ Device Configuration - Modem\Router\Switch . . Internet Usage . Wired Demand XBOX 360 1 Gaming PC 2 PC - HD video . WiFi Demand 3 android + 1 Laptop for browsing and group video chat simultaneously . . Specifics . I am experiencing problems with network speeds and reliability on both wired and wireless connections. On many occasions I experience WiFi Speeds that vary between the 15mbps to 0.50 mbs (or less) and ping ranging from 15ms to 500ms. These results are from when I notice problems with internet lag and run speedtest.net to get details of problems. I have a stretched out floor-plan and old building materials drastically affecting my cellphone signal strength as well). After Reading the "Known Issues" Section on the webpage below http://www.dd-wrt.com/wiki/index.php/Netgear_WNDR3700#Known_Issues I bought the switch and Cat6 cable to increase speed and relieve stress on router in an attempt to fix the symptoms. I thought I'd use the router in a Modem\Switch\Router configuration. I thought I'd only have to use the router for mobile WiFi connections like android or Laptops when necessary (hopefully eliminating the problem caused by the router when subjected to all those demanding Ethernet connections) When I started unboxing the switch, I noticed the manual of this DGS-1008G shows it being connected in the Modem\Router\Switch order and not in the Modem\Switch\Router configuration I was aiming for. I have not been able to find a solid plan to remedy my specific problem without buying another expensive router. I would like to get the speeds I am paying for without buying another router. (My WiFi Adapters would also need to be updated if new router is required, meaning more $$$). I can always sell the switch and get a better one that will bypass the router because my most demanding internet connections are Wired. . . Questions Can I accomplish a Modem\Switch\Router configuration with current switch? Is there a different way to get the wired speed I need while providing WiFi only when necessary? . .

Read the article

Anti-virus protection question?

- by DaBaer

About 4 years ago, I found Kaspersky and have been using the most current version since. Most people try and argue the use of AVG or Avast to me, and there are some very solid reasons I do not go that route. Over the years, I have found Kasp to become bulkier and bulkier, and have had issues setting it up for friends/family/clients. I am just curios on possible recommendations from other users, with my criteria in mind: What I like about Kasp in the past: The license sold in stores in a 3 pack, is considered a commercial license, and emails from Kasp in response to my questions, make it clear that I can do with the 3 licenses that I want, providing I do not use more than 3 installs per Key. So, allowed me to buy 3, 5, and 7 packs, and resell to users at a cheaper cost than what they would pay if they bought their own license. The ability to easily obtain a currently updated .exe for installation on multiple peoples machines. Power of the scan. Kasp has been a good solution for me (even when using a trial license) on cleaning up machines that were badly infected (in which AVG and AVAST were unable to.) Speed of install/update. After a cleanup of malwarebytes, spybot, mcafee stinger, ccleaner, and combofix, I used to be able to get Kasp Int Security installed and updated in around 5 minutes. The issues that I have with the free AV, is strength of protection. In my opinion for someone who is a 'power use' these are good alternatives, because such a user should be trained or knowledgeable enough to be careful and not get themselves in trouble. Most of the users I assist, are too PC ignorant to know any better, and go hogwild on the web. It has been my experience that the number of people coming back to me with spyware/malware/virus issues since I have converted from AVG to Kasp has been cut down to around 20% of what it used to be 4 or 5 years ago. In a perfect world, I could install and use Kasp Internet Security 2008, and be very happy. But this is not the case anymore. So after this long description of what I used, and have used, does anyone have any good recommendations on AV that isn't going to cost me too much per install?

Read the article

All internet requests in Windows time out

- by Brandon

So, I've run into a very strange problem with my home wireless network. Previously, at seemingly random times, the router seemed to disconnect all wireless hosts and cause all of the wired hosts to have a "limited connection" according to windows. In order to fix this, I had to unplug all of the wired hosts from the router, unplug the modem from the router, and power cycle the router. This seemed to solve the problem for a while until the exact same thing happened a day later and I had to go through the same process again. That's where I noticed something weird happening. There was one wireless host (a Windows Vista laptop) that seemed to be causing the router to disconnect the other hosts whenever it connected. When this happened, only that laptop was able to use the wireless from the router. When this happened, I disconnected it from the wireless (by disabling the wireless adapter) then reconnected it (by re-enabling it) and now it, like the other hosts, couldn't connect. I've never really seen anything this strange happen on our network before. So, I restored the router to factory settings and the problem seems to have vanished except one crucial problem. There's another host (a Windows 7 laptop) that was perfectly able to connect before all of the router issues and even in between the crashing and power-cycling events but now says its connected and says it's able to reach the Internet, but all requests time out. In any browser I've tried, the tab says connecting to [site]... for a solid minute and then tells me the request timed out. When I try to ping google.com in cmd it also says request timed out. In frustration, I booted into a dual-boot Ubuntu installation on the Windows 7 host and the connection works fine, to my surprise, as ubuntu is where I am now typing this rather long question. I haven't looked through the event log in windows but will post anything I find in an edit I haven't tried connecting (in Windows 7) to any other wireless network, since The fact that it works in Ubuntu suggests its Windows and not the router but I didn't change any wireless settings in windows before it being able to reach the Internet and not. Does anyone have any clue what could have happened. I opened to buying another router as this one is almost a year old :) but I would like to know whats going on here. Thanks in Advance! P.S. Sorry for how long my question is, I'm a little anxious (:

Read the article

Strange monitor issue - screen goes black after a few seconds

- by Scott Szretter

My LCD monitor display is going black (turning off). It's a Samsung SYncMaster 2233 widescreen. I am trying to figure out if there is anything I can do about it, or if the monitor is junk. I have tried multiple computers, all have the same issue. I have tried a different vga cable, same issue. Power and video cables are tight / double checked. When I power on the monitor, the blue light turns on at the bottom. Then a second or two later the video comes up as expected and it looks fine. However, about 2-3 seconds after that, the screen goes black. The blue light is still on and solid at the bottom (blue light normally flashes when the monitor is sleeping). If I power cycle the monitor, same thing happens. With no computer connected or when I unplug the vga cable, I see the searching for signal message "digital", then the screen goes black. However it usually shows "digital" then "analog" after that and switches between the two a few times. The buttons on the side do not do anything, although they may be, I just can not see if they are or not. I can usually get the "digital" message by pressing the buttons on the side, but then it quickly goes black again. What is really strange is sometimes I can get it to work fine. I am not sure what the difference is. Last week I connected it up and it worked fine and it stayed fine for at least a week! I did not turn it off or anything, I just let the OS put the display to sleep. Then this week one morning I started having the screen going black issue again. Seems like something is either loose inside or beginning to fail. Do you think there is any hope for it? update: pushing the input select button causes the "digital" and "analog" messages to flash on the screen, but only for a few seconds then it goes black. When it was working properly, those messages would flash back and fourth for probably 10-20 seconds then a message would show saying check input signal, but now just a black screen.

Read the article

Windows Server 2008 R2 bare metal restore to different hardware

- by S Falken

Scenario: I have a Windows Server 2008 R2 x64 installation whose main disk drive is now 7 years old and showing signs of age. For the last couple of months it's been displaying increased errors and requirements to run checkdisk. I have successfully created a bare metal restore (BMR) image on a separate data drive on the server, which can be seen from the Windows Recovery console; I tested it by booting to and using the Windows Server installation DVD's recovery utilities. The BMR image includes the system drive with boot partition, system state, and the D:\ drive of the server, which is where I have followed the practice of installing any program that does not require a C:\ installation path. Therefore, the BMR includes both the C:\ and D:\ drives, system state and boot partition. The C:\ drive is a 7-year old Seagate 160GB. The D:\ drive is a rather newer 120GB Western Digital. I have purchased a 128GB solid state Samsung 830 that I want to restore these partitions to, using the BMR. Questions: In the above-referenced article, Microsoft seems to be indicating that I am only able to restore to like-kind hardware, which doesn't help at all and is difficult to believe. Is this really true? I've cleaned these drives up and minimized the size of partition they require. C:\ will need about a 70GB partition, and the data on D:\ will need about 50GB. Will Windows Server backup allow me to restore the BMR to newly-created partitions on the SSD, discarding extra space? I don't need a "how-to": I just need an "is it possible". Justification: Before posting this question, I checked ServerFault articles with the following titles, but none of them were about this exact scenario: Restore SBS 2008 Backup to Same Hardware but Different Disk Configuration Restoring Windows Server 2008 to different hardware - OEM License Restoring II6 server after a hardware failure windows 2008 r2 fail to restore Domain controller failed to restore using windows backup tools How does restore to dissimilar hardware work? Migrating Windows 2008 R2 from a PC to a different PC TFS 2005 Server restore from one hardware to another I also researched Microsoft but only received an oblique answer which was not precisely aimed at my question, at the following URL: http://support.microsoft.com/kb/249694#method3

Read the article

Reliable file copy (move) process - mostly Unix/Linux

- by mfinni

Short story : We have a need for a rock-solid reliable file mover process. We have source directories that are often being written to that we need to move files from. The files come in pairs - a big binary, and a small XML index. We get a CTL file that defines these file bundles. There is a process that operates on the files once they are in the destination directory; that gets rid of them when it's done. Would rsync do the best job, or do we need to get more complex? Long story as follows : We have multiple sources to pull from : one set of directories are on a Windows machine (that does have Cygwin and an SSH daemon), and a whole pile of directories are on a set of SFTP servers (Most of these are also Windows.) Our destinations are a list of directories on AIX servers. We used to use a very reliable Perl script on the Windows/Cygwin machine when it was our only source. However, we're working on getting rid of that machine, and there are other sources now, the SFTP servers, that we cannot presently run our own scripts on. For security reasons, we can't run the copy jobs on our AIX servers - they have no access to the source servers. We currently have a homegrown Java program on a Linux machine that uses SFTP to pull from the various new SFTP source directories, copies to a local tmp directory, verifies that everything is present, then copies that to the AIX machines, and then deletes the files from the source. However, we're finding any number of bugs or poorly-handled error checking. None of us are Java experts, so fixing/improving this may be difficult. Concerns for us are: With a remote source (SFTP), will rsync leave alone any file still being written? Some of these files are large. From reading the docs, it seems like rysnc will be very good about not removing the source until the destination is reliably written. Does anyone have experience confirming or disproving this? Additional info We will be concerned about the ingestion process that operates on the files once they are in the destination directory. We don't want it operating on files while we are in the process of copying them; it waits until the small XML index file is present. Our current copy job are supposed to copy the XML file last. Sometimes the network has problems, sometimes the SFTP source servers crap out on us. Sometimes we typo the config files and a destination directory doesn't exist. We never want to lose a file due to this sort of error. We need good logs If you were presented with this, would you just script up some rsync? Or would you build or buy a tool, and if so, what would it be (or what technologies would it use?) I (and others on my team) are decent with Perl.

Read the article

How to manually patch Blogger template to use Disqus

- by user317944

I'm trying to add disqus to my blog and I tried following this guide to do so: http://disqus.com/docs/patch-blogger/ However their instructions are completely off with what I have on my custom template. Here is the template: <b:skin><![CDATA[/*----------------------------------------------- Blogger Template Style Name: Picture Window Designer: Josh Peterson URL: www.noaesthetic.com ----------------------------------------------- */ /* Variable definitions ==================== */ /* Content ----------------------------------------------- */ body { font: $(body.font); color: $(body.text.color); } html body .region-inner { min-width: 0; max-width: 100%; width: auto; } .content-outer { font-size: 90%; } a:link { text-decoration:none; color: $(link.color); } a:visited { text-decoration:none; color: $(link.visited.color); } a:hover { text-decoration:underline; color: $(link.hover.color); } .body-fauxcolumn-outer { background: $(body.background); } .content-outer { background: $(content.background); -moz-border-radius: $(content.border.radius); -webkit-border-radius: $(content.border.radius); -goog-ms-border-radius: $(content.border.radius); border-radius: $(content.border.radius); -moz-box-shadow: 0 0 $(content.shadow.spread) rgba(0, 0, 0, .15); -webkit-box-shadow: 0 0 $(content.shadow.spread) rgba(0, 0, 0, .15); -goog-ms-box-shadow: 0 0 $(content.shadow.spread) rgba(0, 0, 0, .15); box-shadow: 0 0 $(content.shadow.spread) rgba(0, 0, 0, .15); margin: $(content.margin) auto; } .content-inner { padding: $(content.padding); } /* Header ----------------------------------------------- */ .header-outer { background: $(header.background.color) $(header.background.gradient) repeat-x scroll top left; _background-image: none; color: $(header.text.color); -moz-border-radius: $(header.border.radius); -webkit-border-radius: $(header.border.radius); -goog-ms-border-radius: $(header.border.radius); border-radius: $(header.border.radius); } .Header img, .Header #header-inner { -moz-border-radius: $(header.border.radius); -webkit-border-radius: $(header.border.radius); -goog-ms-border-radius: $(header.border.radius); border-radius: $(header.border.radius); } .header-inner .Header .titlewrapper, .header-inner .Header .descriptionwrapper { padding-left: $(header.padding); padding-right: $(header.padding); } .Header h1 { font: $(header.font); text-shadow: 1px 1px 3px rgba(0, 0, 0, 0.3); } .Header h1 a { color: $(header.text.color); } .Header .description { font-size: 130%; } /* Tabs ----------------------------------------------- */ .tabs-inner { margin: .5em $(tabs.margin.sides) $(tabs.margin.bottom); padding: 0; } .tabs-inner .section { margin: 0; } .tabs-inner .widget ul { padding: 0; background: $(tabs.background.color) $(tabs.background.gradient) repeat scroll bottom; -moz-border-radius: $(tabs.border.radius); -webkit-border-radius: $(tabs.border.radius); -goog-ms-border-radius: $(tabs.border.radius); border-radius: $(tabs.border.radius); } .tabs-inner .widget li { border: none; } .tabs-inner .widget li a { display: block; padding: .5em 1em; margin-$endSide: $(tabs.spacing); color: $(tabs.text.color); font: $(tabs.font); -moz-border-radius: $(tab.border.radius) $(tab.border.radius) 0 0; -webkit-border-top-left-radius: $(tab.border.radius); -webkit-border-top-right-radius: $(tab.border.radius); -goog-ms-border-radius: $(tab.border.radius) $(tab.border.radius) 0 0; border-radius: $(tab.border.radius) $(tab.border.radius) 0 0; background: $(tab.background); border-$endSide: 1px solid $(tabs.separator.color); } .tabs-inner .widget li:first-child a { padding-$startSide: 1.25em; -moz-border-radius-top$startSide: $(tab.first.border.radius); -moz-border-radius-bottom$startSide: $(tabs.border.radius); -webkit-border-top-$startSide-radius: $(tab.first.border.radius); -webkit-border-bottom-$startSide-radius: $(tabs.border.radius); -goog-ms-border-top-$startSide-radius: $(tab.first.border.radius); -goog-ms-border-bottom-$startSide-radius: $(tabs.border.radius); border-top-$startSide-radius: $(tab.first.border.radius); border-bottom-$startSide-radius: $(tabs.border.radius); } .tabs-inner .widget li.selected a, .tabs-inner .widget li a:hover { position: relative; z-index: 1; background: $(tabs.selected.background.color) $(tab.selected.background.gradient) repeat scroll bottom; color: $(tabs.selected.text.color); -moz-box-shadow: 0 0 $(region.shadow.spread) rgba(0, 0, 0, .15); -webkit-box-shadow: 0 0 $(region.shadow.spread) rgba(0, 0, 0, .15); -goog-ms-box-shadow: 0 0 $(region.shadow.spread) rgba(0, 0, 0, .15); box-shadow: 0 0 $(region.shadow.spread) rgba(0, 0, 0, .15); } /* Headings ----------------------------------------------- */ h2 { font: $(widget.title.font); text-transform: $(widget.title.text.transform); color: $(widget.title.text.color); margin: .5em 0; } /* Main ----------------------------------------------- */ .main-outer { background: $(main.background); -moz-border-radius: $(main.border.radius.top) $(main.border.radius.top) 0 0; -webkit-border-top-left-radius: $(main.border.radius.top); -webkit-border-top-right-radius: $(main.border.radius.top); -webkit-border-bottom-left-radius: 0; -webkit-border-bottom-right-radius: 0; -goog-ms-border-radius: $(main.border.radius.top) $(main.border.radius.top) 0 0; border-radius: $(main.border.radius.top) $(main.border.radius.top) 0 0; -moz-box-shadow: 0 $(region.shadow.offset) $(region.shadow.spread) rgba(0, 0, 0, .15); -webkit-box-shadow: 0 $(region.shadow.offset) $(region.shadow.spread) rgba(0, 0, 0, .15); -goog-ms-box-shadow: 0 $(region.shadow.offset) $(region.shadow.spread) rgba(0, 0, 0, .15); box-shadow: 0 $(region.shadow.offset) $(region.shadow.spread) rgba(0, 0, 0, .15); } .main-inner { padding: 15px $(main.padding.sides) 20px; } .main-inner .column-center-inner { padding: 0 0; } .main-inner .column-left-inner { padding-left: 0; } .main-inner .column-right-inner { padding-right: 0; } /* Posts ----------------------------------------------- */ h3.post-title { margin: 0; font: $(post.title.font); } .comments h4 { margin: 1em 0 0; font: $(post.title.font); } .post-outer { background-color: $(post.background.color); border: solid 1px $(post.border.color); -moz-border-radius: $(post.border.radius); -webkit-border-radius: $(post.border.radius); border-radius: $(post.border.radius); -goog-ms-border-radius: $(post.border.radius); padding: 15px 20px; margin: 0 $(post.margin.sides) 20px; } .post-body { line-height: 1.4; font-size: 110%; } .post-header { margin: 0 0 1.5em; color: $(post.footer.text.color); line-height: 1.6; } .post-footer { margin: .5em 0 0; color: $(post.footer.text.color); line-height: 1.6; } blog-pager { font-size: 140% } comments .comment-author { padding-top: 1.5em; border-top: dashed 1px #ccc; border-top: dashed 1px rgba(128, 128, 128, .5); background-position: 0 1.5em; } comments .comment-author:first-child { padding-top: 0; border-top: none; } .avatar-image-container { margin: .2em 0 0; } /* Widgets ----------------------------------------------- */ .widget ul, .widget #ArchiveList ul.flat { padding: 0; list-style: none; } .widget ul li, .widget #ArchiveList ul.flat li { border-top: dashed 1px #ccc; border-top: dashed 1px rgba(128, 128, 128, .5); } .widget ul li:first-child, .widget #ArchiveList ul.flat li:first-child { border-top: none; } .widget .post-body ul { list-style: disc; } .widget .post-body ul li { border: none; } /* Footer ----------------------------------------------- */ .footer-outer { color:$(footer.text.color); background: $(footer.background); -moz-border-radius: $(footer.border.radius.top) $(footer.border.radius.top) $(footer.border.radius.bottom) $(footer.border.radius.bottom); -webkit-border-top-left-radius: $(footer.border.radius.top); -webkit-border-top-right-radius: $(footer.border.radius.top); -webkit-border-bottom-left-radius: $(footer.border.radius.bottom); -webkit-border-bottom-right-radius: $(footer.border.radius.bottom); -goog-ms-border-radius: $(footer.border.radius.top) $(footer.border.radius.top) $(footer.border.radius.bottom) $(footer.border.radius.bottom); border-radius: $(footer.border.radius.top) $(footer.border.radius.top) $(footer.border.radius.bottom) $(footer.border.radius.bottom); -moz-box-shadow: 0 $(region.shadow.offset) $(region.shadow.spread) rgba(0, 0, 0, .15); -webkit-box-shadow: 0 $(region.shadow.offset) $(region.shadow.spread) rgba(0, 0, 0, .15); -goog-ms-box-shadow: 0 $(region.shadow.offset) $(region.shadow.spread) rgba(0, 0, 0, .15); box-shadow: 0 $(region.shadow.offset) $(region.shadow.spread) rgba(0, 0, 0, .15); } .footer-inner { padding: 10px $(main.padding.sides) 20px; } .footer-outer a { color: $(footer.link.color); } .footer-outer a:visited { color: $(footer.link.visited.color); } .footer-outer a:hover { color: $(footer.link.hover.color); } .footer-outer .widget h2 { color: $(footer.widget.title.text.color); } ]] <b:template-skin> <b:variable default='930px' name='content.width' type='length' value='930px'/> <b:variable default='0' name='main.column.left.width' type='length' value='180px'/> <b:variable default='360px' name='main.column.right.width' type='length' value='180px'/> <![CDATA[ body { min-width: $(content.width); } .content-outer, .region-inner { min-width: $(content.width); max-width: $(content.width); _width: $(content.width); } .main-inner .columns { padding-left: $(main.column.left.width); padding-right: $(main.column.right.width); } .main-inner .fauxcolumn-center-outer { left: $(main.column.left.width); right: $(main.column.right.width); /* IE6 does not respect left and right together */ _width: expression(this.parentNode.offsetWidth - parseInt("$(main.column.left.width)") - parseInt("$(main.column.right.width)") + 'px'); } .main-inner .fauxcolumn-left-outer { width: $(main.column.left.width); } .main-inner .fauxcolumn-right-outer { width: $(main.column.right.width); } .main-inner .column-left-outer { width: $(main.column.left.width); right: $(main.column.left.width); margin-right: -$(main.column.left.width); } .main-inner .column-right-outer { width: $(main.column.right.width); margin-right: -$(main.column.right.width); } #layout { min-width: 0; } #layout .content-outer { min-width: 0; width: 800px; } #layout .region-inner { min-width: 0; width: auto; } ]]> </b:template-skin> <div class='main-cap-bottom cap-bottom'> <div class='cap-left'/> <div class='cap-right'/> </div> </div> <footer> <div class='footer-outer'> <div class='footer-cap-top cap-top'> <div class='cap-left'/> <div class='cap-right'/> </div> <div class='fauxborder-left footer-fauxborder-left'> <div class='fauxborder-right footer-fauxborder-right'/> <div class='region-inner footer-inner'> <macro:include id='footer-sections' name='sections'> <macro:param default='2' name='num' value='3'/> <macro:param default='footer' name='idPrefix'/> <macro:param default='foot' name='class'/> <macro:param default='false' name='includeBottom'/> </macro:include>  <b:section class='foot' id='footer-3' showaddelement='no'> document.body.className = document.body.className.replace('loading', ''); <macro:if cond='data:col.num >= 2'> <table border='0' cellpadding='0' cellspacing='0' mexpr:class='"section-columns columns-" + data:col.num'> <tbody> <tr> <td class='first columns-cell'> <b:section mexpr:class='data:col.class' mexpr:id='data:col.idPrefix + "-2-1"'/> </td> <td class='columns-cell'> <b:section mexpr:class='data:col.class' mexpr:id='data:col.idPrefix + "-2-2"'/> </td> <macro:if cond='data:col.num >= 3'> <td class='columns-cell'> <b:section mexpr:class='data:col.class' mexpr:id='data:col.idPrefix + "-2-3"'/> </td> </macro:if> <macro:if cond='data:col.num >= 4'> <td class='columns-cell'> <b:section mexpr:class='data:col.class' mexpr:id='data:col.idPrefix + "-2-4"'/> </td> </macro:if> </tr> </tbody> </table> <macro:if cond='data:col.includeBottom'> <b:section mexpr:class='data:col.class' mexpr:id='data:col.idPrefix + "-3"' showaddelement='no'/> </macro:if> </macro

Read the article

HTML5 Form: Page Is Reloading Instantly After Restyling (And It Shouldn't Be)

- by user3689753

I have a form. I have made it so that if your name is not put in, a red border is put on the name field. That works, BUT...it's for a split second, and then the page reloads. I want the red border to appear, and then stay there. For some reason it's for a split second. Can someone help me make it so the page doesn't reload after displaying the red border? Here's the script. window.onload = function() { document.getElementById("Hogwarts").onsubmit = function () { window.alert("Form submitted. Owl being sent..."); var fname = document.getElementById("fName"); if(!fName.value.match("^[A-Z][A-Za-z]+( [A-Z][A-Za-z]*)*$")) { window.alert("You must enter your name."); addClass(fName, "errorDisp"); document.getElementById("fName").focus(); } else return true; } } function addClass(element, classToAdd) { var currentClassValue = element.className; if (currentClassValue.indexOf(classToAdd) == -1) { if ((currentClassValue == null) || (currentClassValue === "")) { element.className = classToAdd; } else { element.className += " " + classToAdd; } } } function removeClass(element, classToRemove) { var currentClassValue = element.className; if (currentClassValue == classToRemove) { element.className = ""; return; } var classValues = currentClassValue.split(" "); var filteredList = []; for (var i = 0 ; i < classValues.length; i++) { if (classToRemove != classValues[i]) { filteredList.push(classValues[i]); } } element.className = filteredList.join(" "); } Here's the HTML. <!DOCTYPE HTML> <html lang="en"> <head> <meta charset="UTF-8" /> <meta name="viewport" content="width=device-width, initial-scale=1, maximum-scale=1"> <title>Hogwarts School of Witchcraft And Wizardry Application Form</title> <link rel="stylesheet" type="text/css" href="main.css" media="screen"/> <script src="script.js" type="text/javascript"></script> </head> <body> <section> <header> <h1>Hogwarts School of Witchcraft And Wizardry</h1> <nav></nav> </header> <main> <form method="post" id="Hogwarts"> <!--<form action="showform.php" method="post" id="Hogwarts">--!> <fieldset id="aboutMe"> <legend id="aboutMeLeg">About Me</legend> <div class="fieldleading"> <label for="fName" class="labelstyle">First name:</label> <input type="text" id="fName" name="fName" autofocus maxlength="50" value="" placeholder="First Name" size="30"> <label for="lName" class="labelstyle">Last name:</label> <input type="text" id="lName" name="lName" required maxlength="50" value="" placeholder="Last Name" pattern="^[A-Za-z ]{3,}$" size="30"> <label for="age" class="labelstyle">Age:</label> <input type="number" id="age" name="age" required min="17" step="1" max="59" value="" placeholder="Age"> </div> <div class="fieldleading"> <label for="date" class="labelstyle">Date Of Birth:</label> <input type="date" name="date1" id="date" required autofocus value=""> </div> <div id="whitegender"> <div class="fieldleading"> <label class="labelstyle">Gender:</label> </div> <input type="radio" name="sex" value="male" class="gender" required="required">Male<br/> <input type="radio" name="sex" value="female" class="gender" required="required">Female<br/> <input type="radio" name="sex" value="other" class="gender" required="required">Other </div> </fieldset> <fieldset id="contactInfo"> <legend id="contactInfoLeg">Contact Information</legend> <div class="fieldleading"> <label for="street" class="labelstyle">Street Address:</label> <input type="text" id="street" name="street" required autofocus maxlength="50" value="" placeholder="Street Address" pattern="^[0-9A-Za-z\. ]+{5,}$" size="35"> <label for="city" class="labelstyle">City:</label> <input type="text" id="city" name="city" required autofocus maxlength="30" value="" placeholder="City" pattern="^[A-Za-z ]{3,}$" size="35"> <label for="State" class="labelstyle">State:</label> <select required id="State" name="State" > <option value="Select Your State">Select Your State</option> <option value="Delaware">Delaware</option> <option value="Pennsylvania">Pennsylvania</option> <option value="New Jersey">New Jersey</option> <option value="Georgia">Georgia</option> <option value="Connecticut">Connecticut</option> <option value="Massachusetts">Massachusetts</option> <option value="Maryland">Maryland</option> <option value="New Hampshire">New Hampshire</option> <option value="New York">New York</option> <option value="Virginia">Virginia</option> </select> </div> <div class="fieldleading"> <label for="zip" class="labelstyle">5-Digit Zip Code:</label> <input id="zip" name="zip" required autofocus maxlength="5" value="" placeholder="Your Zip Code" pattern="^\d{5}$"> <label for="usrtel" class="labelstyle">10-Digit Telephone Number:</label> <input type="tel" name="usrtel" id="usrtel" required autofocus value="" placeholder="123-456-7890" pattern="^\d{3}[\-]\d{3}[\-]\d{4}$"> </div> <div class="fieldleading"> <label for="email1" class="labelstyle">Email:</label> <input type="email" name="email1" id="email1" required autofocus value="" placeholder="[email protected]" pattern="^[a-z0-9._%+-]+@[a-z0-9.-]+\.[a-z]{2,4}$" size="35"> <label for="homepage1" class="labelstyle">Home Page:</label> <input type="url" name="homepage1" id="homepage1" required autofocus value="" placeholder="http://www.hp.com" pattern="https?://.+" size="35"> </div> </fieldset> <fieldset id="yourInterests"> <legend id="yourInterestsLeg">Your Interests</legend> <label for="Major" class="labelstyle">Major/Program Choice:</label> <select required id="Major" name="Major" > <option value="">Select Your Major</option> <option value="Magic1">Magic Horticulture</option> <option value="Magic2">Black Magic</option> <option value="White">White Magic</option> <option value="Blue">Blue Magic</option> <option value="Non">Non-Wizardry Studies</option> </select> </fieldset> <button type="submit" value="Submit" class="submitreset">Submit</button> <button type="reset" value="Reset" class="submitreset">Reset</button> </form> </main> <footer> © 2014 Bennett Nestok </footer> </section> </body> </html> Here's the CSS. a:link { text-decoration: none !important; color:black !important; } a:visited { text-decoration: none !important; color:red !important; } a:active { text-decoration: none !important; color:green !important; } a:hover { text-decoration: none !important; color:blue !important; background-color:white !important; } ::-webkit-input-placeholder { color: #ffffff; } /* gray80 */ :-moz-placeholder { color: #ffffff; } /* Firefox 18- (one color)*/ ::-moz-placeholder { color: #ffffff; } /* Firefox 19+ (double colons) */ :-ms-input-placeholder { color: #ffffff; } body { margin: 0px auto; text-align:center; background-color:grey; font-weight:normal; font-size:12px; font-family: verdana; color:black; background-image:url('bgtexture.jpg'); background-repeat:repeat; } footer { text-align:center; margin: 0px auto; bottom:0px; position:absolute; width:100%; color:white; background-color:black; height:20px; padding-top:4px; } h1 { color:white; text-align:center; margin: 0px auto; margin-bottom:50px; width:100%; background-color:black; padding-top: 13px; padding-bottom: 14px; -moz-box-shadow: 0 1px 3px rgba(0,0,0,0.5); -webkit-box-shadow: 0 1px 3px rgba(0,0,0,0.5); text-shadow: 0 -1px 1px rgba(0,0,0,0.25); } button.submitreset { -moz-border-radius: 400px; -webkit-border-radius: 400px; border-radius: 400px; -moz-box-shadow: 0 1px 3px rgba(0,0,0,0.5); -webkit-box-shadow: 0 1px 3px rgba(0,0,0,0.5); text-shadow: 0 -1px 1px rgba(0,0,0,0.25); } .labelstyle { background-color:#a7a7a7; color:black; -moz-border-radius: 400px; -webkit-border-radius: 400px; border-radius: 400px; padding:3px 3px 3px 3px; } #aboutMe, #contactInfo, #yourInterests { margin-bottom:30px; text-align:left !important; padding: 10px 10px 10px 10px; } #Hogwarts { text-align:center; margin:0px auto; width:780px; padding-top: 20px !important; padding-bottom: 20px !important; background: -webkit-linear-gradient(#474747, grey); /* For Safari 5.1 to 6.0 */ background: -o-linear-gradient(#474747, grey); /* For Opera 11.1 to 12.0 */ background: -moz-linear-gradient(#474747, grey); /* For Firefox 3.6 to 15 */ background: linear-gradient(#474747, grey); /* Standard syntax */ border-color:black; border-style: solid; border-width: 2px; -moz-box-shadow: 0 1px 3px rgba(0,0,0,0.5); -webkit-box-shadow: 0 1px 3px rgba(0,0,0,0.5); text-shadow: 0 -1px 1px rgba(0,0,0,0.25); } @media (max-width: 800px){ .labelstyle { display: none; } #Hogwarts { width:300px; } h1 { width:304px; margin-bottom:0px; } .fieldleading { margin-bottom:0px !important; } ::-webkit-input-label { /* WebKit browsers */ color: transparent; } :-moz-label { /* Mozilla Firefox 4 to 18 */ color: transparent; } ::-moz-label { /* Mozilla Firefox 19+ */ color: transparent; } :-ms-input-label { /* Internet Explorer 10+ */ color: transparent; } ::-webkit-input-placeholder { /* WebKit browsers */ color: grey !important; } :-moz-placeholder { /* Mozilla Firefox 4 to 18 */ color: grey !important; } ::-moz-placeholder { /* Mozilla Firefox 19+ */ color: grey !important; } :-ms-input-placeholder { /* Internet Explorer 10+ */ color: grey !important; } #aboutMe, #contactInfo, #yourInterests { margin-bottom:10px; text-align:left !important; padding: 5px 5px 5px 5px; } } br { display: block; line-height: 10px; } .fieldleading { margin-bottom:10px; } legend { color:white; } #whitegender { color:white; } #moreleading { margin-bottom:10px; } /*opera only hack attempt*/ @media not all and (-webkit-min-device-pixel-ratio:0) { .fieldleading { margin-bottom:30px !important; } } .errorDisp { border-color: red; border-style: solid; border-width: 2px; }

Read the article

JMS Step 1 - How to Create a Simple JMS Queue in Weblogic Server 11g

- by John-Brown.Evans

JMS Step 1 - How to Create a Simple JMS Queue in Weblogic Server 11g ol{margin:0;padding:0} .c5{vertical-align:top;width:156pt;border-style:solid;border-color:#000000;border-width:1pt;padding:0pt 2pt 0pt 2pt} .c7{list-style-type:disc;margin:0;padding:0} .c4{background-color:#ffffff} .c14{color:#1155cc;text-decoration:underline} .c6{height:11pt;text-align:center} .c13{color:inherit;text-decoration:inherit} .c3{padding-left:0pt;margin-left:36pt} .c0{border-collapse:collapse} .c12{text-align:center} .c1{direction:ltr} .c8{background-color:#f3f3f3} .c2{line-height:1.0} .c11{font-style:italic} .c10{height:11pt} .c9{font-weight:bold} .title{padding-top:24pt;line-height:1.15;text-align:left;color:#000000;font-size:36pt;font-family:"Arial";font-weight:bold;padding-bottom:6pt}.subtitle{padding-top:18pt;line-height:1.15;text-align:left;color:#666666;font-style:italic;font-size:24pt;font-family:"Georgia";padding-bottom:4pt} li{color:#000000;font-size:10pt;font-family:"Arial"} p{color:#000000;font-size:10pt;margin:0;font-family:"Arial"} h1{padding-top:0pt;line-height:1.15;text-align:left;color:#666;font-size:18pt;font-family:"Arial";font-weight:normal;padding-bottom:0pt} h2{padding-top:0pt;line-height:1.15;text-align:left;color:#666;font-size:14pt;font-family:"Arial";font-weight:normal;padding-bottom:0pt} h3{padding-top:0pt;line-height:1.15;text-align:left;color:#666;font-size:12pt;font-family:"Arial";font-weight:normal;padding-bottom:0pt} h4{padding-top:0pt;line-height:1.15;text-align:left;color:#666;font-style:italic;font-size:11pt;font-family:"Arial";padding-bottom:0pt} h5{padding-top:0pt;line-height:1.15;text-align:left;color:#666;font-size:10pt;font-family:"Arial";font-weight:normal;padding-bottom:0pt} h6{padding-top:0pt;line-height:1.15;text-align:left;color:#666;font-style:italic;font-size:10pt;font-family:"Arial";padding-bottom:0pt} This example shows the steps to create a simple JMS queue in WebLogic Server 11g for testing purposes. For example, to use with the two sample programs QueueSend.java and QueueReceive.java which will be shown in later examples. Additional, detailed information on JMS can be found in the following Oracle documentation: Oracle® Fusion Middleware Configuring and Managing JMS for Oracle WebLogic Server 11g Release 1 (10.3.6) Part Number E13738-06 http://docs.oracle.com/cd/E23943_01/web.1111/e13738/toc.htm 1. Introduction and Definitions A JMS queue in Weblogic Server is associated with a number of additional resources: JMS Server A JMS server acts as a management container for resources within JMS modules. Some of its responsibilities include the maintenance of persistence and state of messages and subscribers. A JMS server is required in order to create a JMS module. JMS Module A JMS module is a definition which contains JMS resources such as queues and topics. A JMS module is required in order to create a JMS queue. Subdeployment JMS modules are targeted to one or more WLS instances or a cluster. Resources within a JMS module, such as queues and topics are also targeted to a JMS server or WLS server instances. A subdeployment is a grouping of targets. It is also known as advanced targeting. Connection Factory A connection factory is a resource that enables JMS clients to create connections to JMS destinations. JMS Queue A JMS queue (as opposed to a JMS topic) is a point-to-point destination type. A message is written to a specific queue or received from a specific queue. The objects used in this example are: Object Name Type JNDI Name TestJMSServer JMS Server TestJMSModule JMS Module TestSubDeployment Subdeployment TestConnectionFactory Connection Factory jms/TestConnectionFactory TestJMSQueue JMS Queue jms/TestJMSQueue 2. Configuration Steps The following steps are done in the WebLogic Server Console, beginning with the left-hand navigation menu. 2.1 Create a JMS Server Services > Messaging > JMS Servers Select New Name: TestJMSServer Persistent Store: (none) Target: soa_server1 (or choose an available server) Finish The JMS server should now be visible in the list with Health OK. 2.2 Create a JMS Module Services > Messaging > JMS Modules Select New Name: TestJMSModule Leave the other options empty Targets: soa_server1 (or choose the same one as the JMS server)Press Next Leave “Would you like to add resources to this JMS system module” unchecked and press Finish . 2.3 Create a SubDeployment A subdeployment is not necessary for the JMS queue to work, but it allows you to easily target subcomponents of the JMS module to a single target or group of targets. We will use the subdeployment in this example to target the following connection factory and JMS queue to the JMS server we created earlier. Services > Messaging > JMS Modules Select TestJMSModule Select the Subdeployments tab and New Subdeployment Name: TestSubdeployment Press Next Here you can select the target(s) for the subdeployment. You can choose either Servers (i.e. WebLogic managed servers, such as the soa_server1) or JMS Servers such as the JMS Server created earlier. As the purpose of our subdeployment in this example is to target a specific JMS server, we will choose the JMS Server option. Select the TestJMSServer created earlier Press Finish 2.4 Create a Connection Factory Services > Messaging > JMS Modules Select TestJMSModule and press New Select Connection Factory and Next Name: TestConnectionFactory JNDI Name: jms/TestConnectionFactory Leave the other values at default On the Targets page, select the Advanced Targeting button and select TestSubdeployment Press Finish The connection factory should be listed on the following page with TestSubdeployment and TestJMSServer as the target. 2.5 Create a JMS Queue Services > Messaging > JMS Modules Select TestJMSModule and press New Select Queue and Next Name: TestJMSQueueJNDI Name: jms/TestJMSQueueTemplate: NonePress Next Subdeployments: TestSubdeployment Finish The TestJMSQueue should be listed on the following page with TestSubdeployment and TestJMSServer. Confirm the resources for the TestJMSModule. Using the Domain Structure tree, navigate to soa_domain > Services > Messaging > JMS Modules then select TestJMSModule You should see the following resources The JMS queue is now complete and can be accessed using the JNDI names jms/TestConnectionFactory andjms/TestJMSQueue. In the following blog post in this series, I will show you how to write a message to this queue, using the WebLogic sample Java program QueueSend.java.

Read the article

SharePoint Saturday Michigan 2010 Recap, Slides, and Photos

- by Brian Jackett

This past weekend I attended SharePoint Saturday Michigan (SPSMI) in Ann Arbor, Michigan. For those unfamiliar, SharePoint Saturday is a community driven event where various speakers gather to present at a FREE conference on all topics related to SharePoint. This made my third SharePoint Saturday attended and second I’ve spoken at. I believe today it was announced that about 210 people total attended the event. I was very happy with the turnout, especially the ratio of male to female attendees. Typically with computer related conferences the ratio leans towards more males attending, but both Peter Serzo (one of conference organizers) and I both commented to each other that at the end of the day it appeared to be close to 40% women in the crowd. So here’s my recap of the weekend. Arrival Friday afternoon I drove up from Columbus, OH to Ann Arbor, MI and arrived around 4pm. I was attempting to avoid the rush hour traffic and construction backups. Turned out to be a good idea because other speakers coming up Friday got stuck on a highway which literally closed down in both directions due to a bad accident. I was talking my friend Sean McDonough through the highway closing and this was the first time I had seen a solid black traffic line on Google Maps. Most of us are familiar with Green, Yellow, and Red, but this line was black if that tells you how bad it got. Speaker “Dinner” Fast forward a few hours and it was time for the speaker “dinner.” I put “dinner” in quotes because with this night alone SPSMI set a new bar for nicest and most extravagant speaker appreciation events for SharePoint Saturday. By tapping into some very influential contacts, the conference organizers were able to provide a truck limo (yep you heard right) with refreshments, access to an underground suite at the Palace of Auburn Hills, and courtside tickets to see the Detroit Pistons play that night. Being a Michigan native I have to say that I was absolutely floored by this experience and very thankful to our conference organizers Peter, Sebastian, and Jesse along with Trillium Teamologies. Sessions The actual conference started Saturday morning at 9am with the keynote by Rob Collie who is the Microsoft program manager for PowerPivot. The day continued and I attended the following sessions: Mike Watson (@mikewat) – “SharePoint 2010 Fight Night: Devs vs. Admins” Karl Swedeberg (@kswedberg) – “A Walk on the Client Side with jQuery“ [my session] Brian Jackett (@briantjackett) - “Real World Deployment of SharePoint 2007 Solutions” Jeff Willinger (@jwillie) - “Social Computing and Collaboration Inside and Outside the 4 Walls” Paul Schaeflein (@paulschaeflein) – “PowerShell for the SharePoint Developer” My Presentation I had a great time presenting my session on Deploying SharePoint 2007 Solutions, but it wasn’t without its fair share of technical issues. As my session was right after lunch I came in to my room 10 mins early to set up my laptop, slides, and demos. As a quick background note, a few months ago I got an upgraded laptop from my company Sogeti and have been dual booting it between XP (factory installed) and Windows Server 2008 R2 w/ Hyper-V. As such I had prepared all of my demo virtual machines to run under Hyper-V. About 3 minutes before my session was scheduled to start though it became apparent that I did not have the correct display drivers to connect Windows Server 2008 R2 to the projector… As you can imagine this was a slight cause for concern as I was potentially going to be unable to give my presentation. Luckily for me I usually prepare for such unforeseen issues and had my presentation and some spare VMs that would run on XP on my external hard drive. Knowing this I rebooted my machine into XP and began my presentation without slides until about 5 mins into the session when everything was up and running on XP. Despite this being the first time I gave this presentation I have to say it was one of my favorites I’ve given so far. The audience was very engaged in the session and I received some great, positive feedback afterwards. Thanks to all who attended my session, I appreciate it very much. Link to Presentation Files For those of you who attended my session and would like my slides or demo PowerShell scripts they can be found on my SkyDrive at the link below. Also, if you have a few minutes and wouldn’t mind rating my session I have this session posted on SpeakerRate. As speakers we always appreciate any and all feedback attendees offer, so thank you if you are able to provide any. SkyDrive folder with session files Rate my SharePoint 2007 Solutions session Picture Albums For everyone else, here are my pictures from the weekend. The first link is to my FaceBook album which will have tagging (recommend this one.) The second is to my Live album if you care for higher resolution images. http://www.facebook.com/album.php?aid=2154482&id=21905041&l=a3fb72ee8c View Full Album Conclusion A big thank you goes out to all of the organizers, speakers, sponsors, and attendees of SPSMI. As I’ve said so many times, without each and every one of you these events wouldn’t be possible. I thoroughly enjoyed this trip back to my home state and presenting a new session. For those interested in my upcoming schedule I will be giving two sessions on PowerShell at SharePoint Saturday Charlotte in April, helping plan Stir Trek: Iron Man Edition in May, and I’m submitting sessions to Day of .Net Ann Arbor in May as well. Beyond that I haven’t planned out any travels. Thanks for reading my recap. Look forward to more technical posts now that I have a short break in conferences. -Frog Out links: Michigan image

Read the article

To ORM or Not to ORM. That is the question…

- by Patrick Liekhus

UPDATE: Thanks for the feedback and comments. I have adjusted my table below with your recommendations. I had missed a point or two. I wanted to do a series on creating an entire project using the EDMX XAF code generation and the SpecFlow BDD Easy Test tools discussed in my earlier posts, but I thought it would be appropriate to start with a simple comparison and reasoning on why I choose to use these tools. Let’s start by defining the term ORM, or Object-Relational Mapping. According to Wikipedia it is defined as the following: Object-relational mapping (ORM, O/RM, and O/R mapping) in computer software is a programming technique for converting data between incompatible type systems in object-oriented programming languages. This creates, in effect, a "virtual object database" that can be used from within the programming language. Why should you care? Basically it allows you to map your business objects in code to their persistence layer behind them. And better yet, why would you want to do this? Let me outline it in the following points: Development speed. No more need to map repetitive tasks query results to object members. Once the map is created the code is rendered for you. Persistence portability. The ORM knows how to map SQL specific syntax for the persistence engine you choose. It does not matter if it is SQL Server, Oracle and another database of your choosing. Standard/Boilerplate code is simplified. The basic CRUD operations are consistent and case use database metadata for basic operations. So how does this help? Well, let’s compare some of the ORM tools that I have used and/or researched. I have been interested in ORM for some time now. My ORM of choice for a long time was NHibernate and I still believe it has a strong case in some business situations. However, you have to take business considerations into account and the law of diminishing returns. Because of these two factors, my recent activity and experience has been around DevExpress eXpress Persistence Objects (XPO). The primary reason for this is because they have the DevExpress eXpress Application Framework (XAF) that sits on top of XPO. With this added value, the data model can be created (either database first of code first) and the Web and Windows client can be created from these maps. While out of the box they provide some simple list and detail screens, you can verify easily extend and modify these to your liking. DevExpress has done a tremendous job of providing enough framework while also staying out of the way when you need to extend it. This sounds worse than it really is. What I mean by this is that if you choose to follow DevExpress coding style and recommendations, the hooks and extension points provided allow you to do some pretty heavy lifting while also not worrying about the basics. I have put together a list of the top features that I have used to compare the limited list of ORM’s that I have exposure with. Again, the biggest selling point in my opinion is that XPO is just a solid as any of the other ORM’s but with the added layer of XAF they become unstoppable. And then couple that with the EDMX modeling tools and code generation, it becomes a no brainer. Designer Features Entity Framework NHibernate Fluent w/ Nhibernate Telerik OpenAccess DevExpress XPO DevExpress XPO/XAF plus Liekhus Tools Uses XML to map relationships - Yes - - - Visual class designer interface Yes - - - - Yes Management integrated w/ Visual Studio Yes - - Yes - Yes Supports schema first approach Yes - - Yes - Yes Supports model first approach Yes - - Yes Yes Yes Supports code first approach Yes Yes Yes Yes Yes Yes Attribute driven coding style Yes - Yes - Yes Yes I have a very small team and limited resources with a lot of responsibilities. In order to keep up with our customers, we must rely on tools like these. We use the EDMX tool so that we can create a visual representation of the applications with our customers. Second, we rely on the code generation so that we can focus on the business problems at hand and not whether a field is mapped correctly. This keeps us from requiring as many junior level developers on our team. I have also worked on multiple teams where they believed in writing their own “framework”. In my experiences and opinion this is not the route to take unless you have a team dedicated to supporting just the framework. Each time that I have worked on custom frameworks, the framework eventually becomes old, out dated and full of “performance” enhancements specific to one or two requirements. With an ORM, there are a lot smarter people than me working on the bigger issue of persistence and performance. Again, my recommendation would be to use an available framework and get to working on your business domain problems. If your coding is not making money for you, why are you working on it? Do you really need to be writing query to object member code again and again? Thanks

Read the article

Test-Drive ASP.NET MVC Review

- by Ben Griswold

A few years back I started dallying with test-driven development, but I never fully committed to the practice. This wasn’t because I didn’t believe in the value of TDD; it was more a matter of not completely understanding how to incorporate “test first” into my everyday development. Back in my web forms days, I could point fingers at the framework for my ignorance and laziness. After all, web forms weren’t exactly designed for testability so who could blame me for not embracing TDD in those conditions, right? But when I switched to ASP.NET MVC and quickly found myself fresh out of excuses and it became instantly clear that it was time to get my head around red-green-refactor once and for all or I would regretfully miss out on one of the biggest selling points the new framework had to offer. I have previously written about how I learned ASP.NET MVC. It was primarily hands on learning but I did read a couple of ASP.NET MVC books along the way. The books I read dedicated a chapter or two to TDD and they certainly addressed the benefits of TDD and how MVC was designed with testability in mind, but TDD was merely an afterthought compared to, well, teaching one how to code the model, view and controller. This approach made some sense, and I learned a bunch about MVC from those books, but when it came to TDD the books were just a teaser and an opportunity missed. But then I got lucky – Jonathan McCracken contacted me and asked if I’d review his book, Test-Drive ASP.NET MVC, and it was just what I needed to get over the TDD hump. As the title suggests, Test-Drive ASP.NET MVC takes a different approach to learning MVC as it focuses on testing right from the very start. McCracken wastes no time and swiftly familiarizes us with the framework by building out a trivial Quote-O-Matic application and then dedicates the better part of his book to testing first – first by explaining TDD and then coding a full-featured Getting Organized application inspired by David Allen’s popular book, Getting Things Done. If you are a learn-by-example kind of coder (like me), you will instantly appreciate and enjoy McCracken’s style – its fast-moving, pragmatic and focused on only the most relevant information required to get you going with ASP.NET MVC and TDD. The book continues with the test-first theme but McCracken moves away from the sample application and incorporates other practical skills like persisting models with NHibernate, leveraging Inversion of Control with the IControllerFactory and building a RESTful web service. What I most appreciated about this section was McCracken’s use of and praise for open source libraries like Rhino Mocks, SQLite and StructureMap (to name just a few) and productivity tools like ReSharper, Web Platform Installer and ASP.NET SQL Server Setup Wizard. McCracken’s emphasis on real world, pragmatic development was clearly demonstrated in every tool choice, straight-forward code block and developer tip. Whether one is already familiar with the tools/tips or not, McCracken’s thought process is easily understood and appreciated. The final section of the book walks the reader through security and deployment – everything from error handling and logging with ELMAH, to ASP.NET Health Monitoring, to using MSBuild with automated builds, to the deployment of ASP.NET MVC to various web environments. These chapters, like those prior, offer enough information and explanation to simply help you get the job done. Do I believe Test-Drive ASP.NET MVC will turn you into an expert MVC developer overnight? Well, no. I don’t think any book can make that claim. If that were possible, I think book list prices would skyrocket! That said, Test-Drive ASP.NET MVC provides a solid foundation and a unique (and dare I say necessary) approach to learning ASP.NET MVC. Along the way McCracken shares loads of very practical software development tips and references numerous tools and libraries. The bottom line is it’s a great ASP.NET MVC primer – if you’re new to ASP.NET MVC it’s just what you need to get started. Do I believe Test-Drive ASP.NET MVC will give you everything you need to start employing TDD in your everyday development? Well, I used to think that learning TDD required a lot of practice and, if you’re lucky enough, the guidance of a mentor or coach. I used to think that one couldn’t learn TDD from a book alone. Well, I’m still no pro, but I’m testing first now and Jonathan McCracken and his book, Test-Drive ASP.NET MVC, played a big part in making this happen. If you are an MVC developer and a TDD newb, Test-Drive ASP.NET MVC is just the book for you.

Read the article

SQLAuthority News – Learning Trip – Traveling to Learn SQL Server

- by pinaldave

I am currently traveling to Delhi to learn SQL Server in person from my friend. You can read more details about why am I learning SQL Server. I have signed up for the course End to End SQL Server Business Intelligence at Koenig Solutions. Yesterday I blogged about my registration experience and today I am going to write about my experience once I arrived at Delhi. From Ahmedabad to Delhi I stay with my wife and daughter in Bangalore (IT Hub of India), my hometown is Ahmedabad. My parents stay in city nearby Ahmedabad. I decided to spend few days with my folks before I sign up for 3 days of solid learning. I had selected an early morning flight to Delhi. I landed at 8:30 AM in Delhi. As soon as I checked email in my mobile I was really glad that I had received details of my pick up vehicle from Koenig. I walked out of the airport and I noticed that a driver was waiting with a placard with my name and photo associated with it. He was in Koenig uniform so there was no chance to make mistakes. In minutes of landing in Delhi I was in my transport heading to the Koenig Training Center. After the quick introduction driver handed me a bag (to be precise Eco friendly bag). The bag contained following items: My registration form All necessary documents in print which I had received earlier A Printed Book of the course next day INR 1000 (What?) I was glad to receive the bag but I was very confused with the Rs 1000. I decided to figure this out once I reach to the training center. Arriving at Koenig Inn Deluxe Koenig registration fees include all the stay and meals. I had opted for Koenig Inn Deluxe as my stay as it was recommended by my friend as well it was the right economical choice for me. When I reached to my accommodation, they were well aware of my arrival and was immediately led to my spacious room. The room is well equipped with all the amenities (hot water, air condition, coffee table, munching snacks, and free internet) and the staff is very friendly. I immediately got ready as I had to go to Koenig Training Center to meet Center Head for a quick introduction. Koenig Inn Delux Koenig Training Center The training center is within five minutes of distance from the accommodation. I was lead to center head right away and had a very meaningful conversation with Ms Hema regarding my learning goals. She gave me a quick tour of the training center. I was amazed with the numbers of lab rooms they have in the center. The labs are spacious and give the most needed hand’s on experience to the users. I was led to the lab where I was suppose to learn my class the very next day as well I was provided my trainer’s profile. Mystery of Rs 1000 Well, after all this I have still not forgotten why I was provided Rs 1000 when arrived at the airport. When I asked about that I was told that because many students comes from foreign places and they may not have Indian Currency when they land at airport. This was for their immediate consumption till they arrive at the training center. Later on they can get their currency converted to local currency at Koenig Travel Desk. My curiosity was satisfied but I had not expected this answer. I am amazed at the attention to the details. Koenig Travel Desk When I heard about Koenig Travel Desk, I remembered that I have few friends in Delhi and Gurgaon. I had completed all of the formalities so I had reset of the day on my hand. I requested the travel desk if they can arrange a day cab for me so I can visit my friends in Guragon. Within 10 minutes I was on my way to Gurgaon. Telerik India Office Visit What did I do in Guragaon? I met my friends Abhishek Kant, Dhananjay Kumar and Amit Chowdhary. I visited Telerik India office and we had an excellent conversation on various aspects of technology and community. The Telerik India office is very spacious and Abhishek Kant (Telerik India Country Manager) gave us a quick tour of the office. We had an excellent lunch and dinner. One thing is for sure – the day was well spent. Pinal Dave, Dhananjay Kumar and Abhishek Kant Later evening I returned to my accommodation and decided to read up a few of the topics which I was going to learn next day. In tomorrow’s blog post I will discuss about my learning experience. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQL Training, T SQL, Technology

Read the article

World Record Oracle Business Intelligence Benchmark on SPARC T4-4

- by Brian

Oracle's SPARC T4-4 server configured with four SPARC T4 3.0 GHz processors delivered the first and best performance of 25,000 concurrent users on Oracle Business Intelligence Enterprise Edition (BI EE) 11g benchmark using Oracle Database 11g Release 2 running on Oracle Solaris 10. A SPARC T4-4 server running Oracle Business Intelligence Enterprise Edition 11g achieved 25,000 concurrent users with an average response time of 0.36 seconds with Oracle BI server cache set to ON. The benchmark data clearly shows that the underlying hardware, SPARC T4 server, and the Oracle BI EE 11g (11.1.1.6.0 64-bit) platform scales within a single system supporting 25,000 concurrent users while executing 415 transactions/sec. The benchmark demonstrated the scalability of Oracle Business Intelligence Enterprise Edition 11g 11.1.1.6.0, which was deployed in a vertical scale-out fashion on a single SPARC T4-4 server. Oracle Internet Directory configured on SPARC T4 server provided authentication for the 25,000 Oracle BI EE users with sub-second response time. A SPARC T4-4 with internal Solid State Drive (SSD) using the ZFS file system showed significant I/O performance improvement over traditional disk for the Web Catalog activity. In addition, ZFS helped get past the UFS limitation of 32767 sub-directories in a Web Catalog directory. The multi-threaded 64-bit Oracle Business Intelligence Enterprise Edition 11g and SPARC T4-4 server proved to be a successful combination by providing sub-second response times for the end user transactions, consuming only half of the available CPU resources at 25,000 concurrent users, leaving plenty of head room for increased load. The Oracle Business Intelligence on SPARC T4-4 server benchmark results demonstrate that comprehensive BI functionality built on a unified infrastructure with a unified business model yields best-in-class scalability, reliability and performance. Oracle BI EE 11g is a newer version of Business Intelligence Suite with richer and superior functionality. Results produced with Oracle BI EE 11g benchmark are not comparable to results with Oracle BI EE 10g benchmark. Oracle BI EE 11g is a more difficult benchmark to run, exercising more features of Oracle BI. Performance Landscape Results for the Oracle BI EE 11g version of the benchmark. Results are not comparable to the Oracle BI EE 10g version of the benchmark. Oracle BI EE 11g Benchmark System Number of Users Response Time (sec) 1 x SPARC T4-4 (4 x SPARC T4 3.0 GHz) 25,000 0.36 Results for the Oracle BI EE 10g version of the benchmark. Results are not comparable to the Oracle BI EE 11g version of the benchmark. Oracle BI EE 10g Benchmark System Number of Users 2 x SPARC T5440 (4 x SPARC T2+ 1.6 GHz) 50,000 1 x SPARC T5440 (4 x SPARC T2+ 1.6 GHz) 28,000 Configuration Summary Hardware Configuration: SPARC T4-4 server 4 x SPARC T4-4 processors, 3.0 GHz 128 GB memory 4 x 300 GB internal SSD Storage Configuration: "> Sun ZFS Storage 7120 16 x 146 GB disks Software Configuration: Oracle Solaris 10 8/11 Oracle Solaris Studio 12.1 Oracle Business Intelligence Enterprise Edition 11g (11.1.1.6.0) Oracle WebLogic Server 10.3.5 Oracle Internet Directory 11.1.1.6.0 Oracle Database 11g Release 2 Benchmark Description Oracle Business Intelligence Enterprise Edition (Oracle BI EE) delivers a robust set of reporting, ad-hoc query and analysis, OLAP, dashboard, and scorecard functionality with a rich end-user experience that includes visualization, collaboration, and more. The Oracle BI EE benchmark test used five different business user roles - Marketing Executive, Sales Representative, Sales Manager, Sales Vice-President, and Service Manager. These roles included a maximum of 5 different pre-built dashboards. Each dashboard page had an average of 5 reports in the form of a mix of charts, tables and pivot tables, returning anywhere from 50 rows to approximately 500 rows of aggregated data. The test scenario also included drill-down into multiple levels from a table or chart within a dashboard. The benchmark test scenario uses a typical business user sequence of dashboard navigation, report viewing, and drill down. For example, a Service Manager logs into the system and navigates to his own set of dashboards using Service Manager. The BI user selects the Service Effectiveness dashboard, which shows him four distinct reports, Service Request Trend, First Time Fix Rate, Activity Problem Areas, and Cost Per Completed Service Call spanning 2002 to 2005. The user then proceeds to view the Customer Satisfaction dashboard, which also contains a set of 4 related reports, drills down on some of the reports to see the detail data. The BI user continues to view more dashboards – Customer Satisfaction and Service Request Overview, for example. After navigating through those dashboards, the user logs out of the application. The benchmark test is executed against a full production version of the Oracle Business Intelligence 11g Applications with a fully populated underlying database schema. The business processes in the test scenario closely represent a real world customer scenario. See Also SPARC T4-4 Server oracle.com OTN Oracle Business Intelligence oracle.com OTN Oracle Database 11g Release 2 Enterprise Edition oracle.com OTN WebLogic Suite oracle.com OTN Oracle Solaris oracle.com OTN Disclosure Statement Copyright 2012, Oracle and/or its affiliates. All rights reserved. Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners. Results as of 30 September 2012.

Read the article

doubleTwist is an iTunes Alternative that Supports Several Devices

- by Mysticgeek

There are a lot of iTunes users out there, but unfortunately you can’t use it with all of your portable devices. Today we take a look at doubleTwist, which allows you to sync your media with a multitude of portable devices and easily share it as well. Note: You can run doubleTwist on Windows or Mac, and here we take a look at the Windows version. Install & Setup doubleTwist Download and install doubleTwist using the defaults in the wizard… Installation takes several moments and you’ll see the progress while it finishes up. After installation is complete, sign up for an account if you don’t already have one. If you do have an account you can login right away. Enter in your username, email address, and password then click Sign Up. You’ll get an confirmation email and need to activate the account before you can sign in. Once you’re all signed up, launch doubleTwist and you’ll be ready to start using it. doubleTwist Music The default music store is Amazon MP3 store which might appeal to those of you who are tired of the iTunes music store. A lot of times the music is cheaper and available at higher bit rates. You can start searching for music in the Amazon Music Store and previewing songs. To purchase anything though you will need to sign into your Amazon account. Under Playlists it allows you to import your playlists from iTunes and Windows Media Player, which is a handy feature if you don’t want to set them up again. Of course you can play your songs through the music player on your desktop. Devices One of the coolest things about doubleTwist is that it supports a lot of different portable media devices including iPod, BlackBerry, Windows Mobile, Android, PSP, Smartphones, and much more. Unfortunately for Zune users…there isn’t any support for the Zune of Zune HD yet. Here we have a Creative Zen attached and can sync songs, pictures, and podcasts. An HTC-S620 Smartphone running Windows Mobile… Even a simple USB drive will be recognized and you can transfer your media to it as well. Podcasts Finding your favorite audio and video podcasts is easy with the search feature. You can easily manage and subscribe to podcasts in the subscriptions section. You can watch the video podcasts directly in doubleTwist. Sharing Media Also you can share digital media with your friends or add it to Flickr and YouTube. You can send any pictures, videos, or music in your library to other people by dragging it over. You can email users individually… Or access contacts from your Gmail and Yahoo accounts. There is a limit to how much you can send of video podcasts… only the first 10 minutes. The person you send it to will get a link in their email that points to your My Feed page on the doubleTwist site. There they can access the media you sent…in this example it’s a video podcast but you can share any media. Other Features Under My Profile you can change your avatar and personal information. In Preferences you can choose where media is stored, its startup actions, podcast subscriptions, and manage device syncing. Conclusion It’s still in beta stage so expect some bugs, but overall doubleTwist is a solid media player that is easy to use with a clean interface. It’s simple and doesn’t try to do too much so is fairly easy on system resources. The main annoyance is it tries to catalog all of your media out of the box. Which may be alright for some users with smaller media collections, but very irritating to advanced users with large collections. Also there is currently no support for the Zune, but according to their forums, it’s on the way. At the time of this writing it’s in public beta and can be downloaded for XP, Vista, Windows 7 (32 & 64 bit), and Mac OSX. If you’re looking for an iTunes alternative that works with several different portable devices, you might want to give DoubleTwist a try. Download DoubleTwist Public Beta See If Your Media Device is Supported by doubleTwist Similar Articles Productive Geek Tips MusicBee is a Fast and Powerful Music ManagerAvoid the Apple QuickTime Bloat with QT LiteBeginner Geek: Set Default Programs in Windows 7 and VistaBeginner Geeks: OpenOffice is a Free Cross Platform Alternative to MS OfficeManage Devices the Easy Way with Device Stage in Windows 7 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Play Music in Chrome by Simply Dragging a File 15 Great Illustrations by Chow Hon Lam Easily Sync Files & Folders with Friends & Family Amazon Free Kindle for PC Download Stretch popurls.com with a Stylish Script (Firefox) OldTvShows.org – Find episodes of Hitchcock, Soaps, Game Shows and more

Read the article

Liskov Substitution Principle and the Oft Forgot Third Wheel

- by Stacy Vicknair

Liskov Substitution Principle (LSP) is a principle of object oriented programming that many might be familiar with from the SOLID principles mnemonic from Uncle Bob Martin. The principle highlights the relationship between a type and its subtypes, and, according to Wikipedia, is defined by Barbara Liskov and Jeanette Wing as the following principle: Let be a property provable about objects of type . Then should be provable for objects of type where is a subtype of . Rectangles gonna rectangulate The iconic example of this principle is illustrated with the relationship between a rectangle and a square. Let’s say we have a class named Rectangle that had a property to set width and a property to set its height. 1: Public Class Rectangle 2: Overridable Property Width As Integer 3: Overridable Property Height As Integer 4: End Class We all at some point here that inheritance mocks an “IS A” relationship, and by gosh we all know square IS A rectangle. So let’s make a square class that inherits from rectangle. However, squares do maintain the same length on every side, so let’s override and add that behavior. 1: Public Class Square 2: Inherits Rectangle 3: 4: Private _sideLength As Integer 5: 6: Public Overrides Property Width As Integer 7: Get 8: Return _sideLength 9: End Get 10: Set(value As Integer) 11: _sideLength = value 12: End Set 13: End Property 14: 15: Public Overrides Property Height As Integer 16: Get 17: Return _sideLength 18: End Get 19: Set(value As Integer) 20: _sideLength = value 21: End Set 22: End Property 23: End Class Now, say we had the following test: 1: Public Sub SetHeight_DoesNotAffectWidth(rectangle As Rectangle) 2: 'arrange 3: Dim expectedWidth = 4 4: rectangle.Width = 4 5: 6: 'act 7: rectangle.Height = 7 8: 9: 'assert 10: Assert.AreEqual(expectedWidth, rectangle.Width) 11: End Sub If we pass in a rectangle, this test passes just fine. What if we pass in a square? This is where we see the violation of Liskov’s Principle! A square might "IS A” to a rectangle, but we have differing expectations on how a rectangle should function than how a square should! Great expectations Here’s where we pat ourselves on the back and take a victory lap around the office and tell everyone about how we understand LSP like a boss. And all is good… until we start trying to apply it to our work. If I can’t even change functionality on a simple setter without breaking the expectations on a parent class, what can I do with subtyping? Did Liskov just tell me to never touch subtyping again? The short answer: NO, SHE DIDN’T. When I first learned LSP, and from those I’ve talked with as well, I overlooked a very important but not appropriately stressed quality of the principle: our expectations. Our inclination is to want a logical catch-all, where we can easily apply this principle and wipe our hands, drop the mic and exit stage left. That’s not the case because in every different programming scenario, our expectations of the parent class or type will be different. We have to set reasonable expectations on the behaviors that we expect out of the parent, then make sure that those expectations are met by the child. Any expectations not explicitly expected of the parent aren’t expected of the child either, and don’t register as a violation of LSP that prevents implementation. You can see the flexibility mentioned in the Wikipedia article itself: A typical example that violates LSP is a Square class that derives from a Rectangle class, assuming getter and setter methods exist for both width and height. The Square class always assumes that the width is equal with the height. If a Square object is used in a context where a Rectangle is expected, unexpected behavior may occur because the dimensions of a Square cannot (or rather should not) be modified independently. This problem cannot be easily fixed: if we can modify the setter methods in the Square class so that they preserve the Square invariant (i.e., keep the dimensions equal), then these methods will weaken (violate) the postconditions for the Rectangle setters, which state that dimensions can be modified independently. Violations of LSP, like this one, may or may not be a problem in practice, depending on the postconditions or invariants that are actually expected by the code that uses classes violating LSP. Mutability is a key issue here. If Square and Rectangle had only getter methods (i.e., they were immutable objects), then no violation of LSP could occur. What this means is that the above situation with a rectangle and a square can be acceptable if we do not have the expectation for width to leave height unaffected, or vice-versa, in our application. Conclusion – the oft forgot third wheel Liskov Substitution Principle is meant to act as a guidance and warn us against unexpected behaviors. Objects can be stateful and as a result we can end up with unexpected situations if we don’t code carefully. Specifically when subclassing, make sure that the subclass meets the expectations held to its parent. Don’t let LSP think you cannot deviate from the behaviors of the parent, but understand that LSP is meant to highlight the importance of not only the parent and the child class, but also of the expectations WE set for the parent class and the necessity of meeting those expectations in order to help prevent sticky situations. Code examples, in both VB and C# Technorati Tags: LSV,Liskov Substitution Principle,Uncle Bob,Robert Martin,Barbara Liskov,Liskov

Read the article

Stir Trek: Iron Man Edition Recap and Photos

- by Brian Jackett

If you’ve noticed my blogging activity has reduced in frequency and technical content lately it’s primarily due to all of the conferences I’ve been attending, speaking at, or planning in the past few months. This past Friday myself and six other dedicated individuals put on Stir Trek: Iron Man Edition as the culmination of a few months of hard work. For those unfamiliar, Stir Trek is a web developer conference that was founded last year as an event to showcase content from Microsoft’s MIX conference and end the day with a private showing of the then just-released Star Trek movie. This year’s conference expanded from 2 to 4 content tracks and upped the number of tickets from 350 to 600. Even more amazing was the fact that we had 592 people show up day of the event for the lowest drop-off percentage of any conference I’ve been to before. Nerd Dinner and Swag Bags The night before Stir Trek: Iron Man Edition we hosted a nerd dinner at the Polaris Shopping mall food court with about 30 in attendance. Nerd dinners are a great time to meet others passionate about technology and socialize before the whirlwind of the conference hits. After the nerd dinner 20+ volunteers headed to the conference location and helped us stuff swag bags. This in and of itself was a monumental task of putting together 600 swag bags with numerous leaflets, sponsor items, and t-shirts. A big thanks goes out to all who assisted us that night so that we could finish in just under 2 hours instead of taking all night. My sleep schedule also thanks you. Morning of Stir Trek After getting a decent amount of sleep I arrived at Marcus Crosswoods theater at 6am to begin setting up for the day. Myself and Jody Morgan were in charge of registration so we got tables set up, laid out swag bags, and organized our volunteer crew to assist with checking-in attendees. Despite having 600+ people registration went fairly smoothly and got the day off to a great start. I especially appreciated the 3+ cups of coffee from Crimson Cup, a local coffee shop. For any of you that know me you’ll know that I rarely drink coffee except a few times a year when I really need the energy, so that says a lot about how good their coffee is. Conference Starts Once registration was completed the day kicked off with Molly Holzschlag keynoting. Unfortunately Molly suffered from an ear infection and wasn’t able to fly so she had a virtual keynote and a session later in the day. I was working behind the scenes on various tasks so I was only able to drop in very briefly on the keynote and rest of the morning sessions. Throughout the day I tried to grab at least 1 or 2 pics of each presenter. See my album below for the full set of pics. For lunch we ordered around 150 pizzas from Mellow Mushroom, a local pizza place (notice the theme of supporting local businesses.) Early on we were concerned about Mellow Mushroom being able to supply that many pizzas and get them delivered (still hot) to the theater, but they did an excellent job day of the event. I wish I had gotten some pictures of the old school VW van they delivered the pizza in, but I was just a bit busy running around trying to get theaters ready for lunch. We had attendees from last year who specifically requested that we have Mellow Mushroom supply lunch this year and I’m glad everything worked out being able to use them again. During the afternoon I was able to attend a few sessions and hear some great content from various speakers. It was also nice to just sit down and get off my feet for a bit. After the last sessions the day concluded with a raffle. There were a few logistical and technical issues that hampered our ability to smoothly conduct the raffle. To those of you that agree the raffle wasn’t the smoothest experience I would like to say that the Stir Trek planning committee has already begun meeting to discuss ways of improving the conference for next year. We are also accepting feedback (both positive and negative) at the following link: click here. If you don’t wish to use the Joind In site you can also email me directly and I’ll be sure to pass along the feedback. Iron Man 2 Movie Last but not least, what Stir Trek event would be complete without the feature movie. This year’s movie was Iron Man 2. The theater had some really cool props and promotions (see pic below) for the movie. I really enjoyed Iron Man 2, but I would recommend brushing up on the Iron Man comics and Marvel’s plans for future movies to understand some of the plot elements that come up. Also make sure you stay through to the end of the movie credits to see a sneak peak of something special, that’s all I’ll say. Conclusion Again a big thanks goes out to all of the speakers, sponsors, attendees, movie theater staff, volunteers, and everyone else involved in making this event great. Also big thanks to my fellow Stir Trek planning committee members: Jeff Blankenburg, Matt Casto, Carey Payette, Jody Morgan, Rick Kierner, and Sarah Dutkiewitcz. I am grateful for everything I learned while helping plan this event and look forward to being involved again next year. For those interested we are currently targeting Thor as our movie theme for 2011 and then The Avengers for 2012. These are tentative based on release dates that could shift as we get closer, but for now look solid. Photos Pics on Facebook (includes tagging) Stir Trek: Iron Man Edition photos on Facebook Pics on Live site (higher res) View Full Album -Frog Out

Read the article

How to Buy an SD Card: Speed Classes, Sizes, and Capacities Explained

- by Chris Hoffman

Memory cards are used in digital cameras, music players, smartphones, tablets, and even laptops. But not all SD cards are created equal — there are different speed classes, physical sizes, and capacities to consider. Different devices require different types of SD cards. Here are the differences you’ll need to keep in mind when picking out the right SD card for your device. Speed Class In a nutshell, not all SD cards offer the same speeds. This matters for some tasks more than it matters for others. For example, if you’re a professional photographer taking photos in rapid succession on a DSLR camera saving them in high-resolution RAW format, you’ll want a fast SD card so your camera can save them as fast as possible. A fast SD card is also important if you want to record high-resolution video and save it directly to the SD card. If you’re just taking a few photos on a typical consumer camera or you’re just using an SD card to store some media files on your smartphone, the speed isn’t as important. Manufacturers use “speed classes” to measure an SD card’s speed. The SD Association that defines the SD card standard doesn’t actually define the exact speeds associated with these classes, but they do provide guidelines. There are four different speed classes — 10, 8, 4, and 2. 10 is the fastest, while 2 is the slowest. Class 2 is suitable for standard definition video recording, while classes 4 and 6 are suitable for high-definition video recording. Class 10 is suitable for “full HD video recording” and “HD still consecutive recording.” There are also two Ultra High Speed (UHS) speed classes, but they’re more expensive and are designed for professional use. UHS cards are designed for devices that support UHS. Here are the associated logos, in order from slowest to fastest: You’ll probably be okay with a class 4 or 6 card for typical use in a digital camera, smartphone, or tablet. Class 10 cards are ideal if you’re shooting high-resolution videos or RAW photos. Class 2 cards are a bit on the slow side these days, so you may want to avoid them for all but the cheapest digital cameras. Even a cheap smartphone can record HD video, after all. An SD card’s speed class is identified on the SD card itself. You’ll also see the speed class on the online store listing or on the card’s packaging when purchasing it. For example, in the below photo, the middle SD card is speed class 4, while the two other cards are speed class 6. If you see no speed class symbol, you have a class 0 SD card. These cards were designed and produced before the speed class rating system was introduced. They may be slower than even a class 2 card. Physical Size Different devices use different sizes of SD cards. You’ll find standard-size CD cards, miniSD cards, and microSD cards. Standard SD cards are the largest, although they’re still very small. They measure 32x24x2.1 mm and weigh just two grams. Most consumer digital cameras for sale today still use standard SD cards. They have the standard “cut corner” design. miniSD cards are smaller than standard SD cards, measuring 21.5x20x1.4 mm and weighing about 0.8 grams. This is the least common size today. miniSD cards were designed to be especially small for mobile phones, but we now have a smaller size. microSD cards are the smallest size of SD card, measuring 15x11x1 mm and weighing just 0.25 grams. These cards are used in most cell phones and smartphones that support SD cards. They’re also used in many other devices, such as tablets. SD cards will only fit into marching slots. You can’t plug a microSD card into a standard SD card slot — it won’t fit. However, you can purchase an adapter that allows you to plug a smaller SD card into a larger SD card’s form and fit it into the appropriate slot. Capacity Like USB flash drives, hard drives, solid-state drives, and other storage media, different SD cards can have different amounts of storage. But the differences between SD card capacities don’t stop there. Standard SDSC (SD) cards are 1 MB to 2 GB in size, or perhaps 4 GB in size — although 4 GB is non-standard. The SDHC standard was created later, and allows cards 2 GB to 32 GB in size. SDXC is a more recent standard that allows cards 32 GB to 2 TB in size. You’ll need a device that supports SDHC or SDXC cards to use them. At this point, the vast majority of devices should support SDHC. In fact, the SD cards you have are probably SDHC cards. SDXC is newer and less common. When buying an SD card, you’ll need to buy the right speed class, size, and capacity for your needs. Be sure to check what your device supports and consider what speed and capacity you’ll actually need. Image Credit: Ryosuke SEKIDO on Flickr, Clive Darra on Flickr, Steven Depolo on Flickr

Read the article

SQL SERVER – TechEd India 2012 – Content, Speakers and a Lots of Fun

- by pinaldave

TechEd is one event which every developers and IT professionals are looking forward to attend. It is opportunity of life time and no matter how many time one gets chance to engage with it, it is never enough. I still remember every single moment of every TechEd I have attended so far. We are less than 100 hours away from TechEd India 2012 event.This event is the one must attend event for every Technology Enthusiast. Fourth time in the row I am going to attend this event and I am equally excited as the first time of the event. There are going to be two very solid SQL Server track this time and I will be attending end of the end both the tracks. Here is my view on each of the 10 sessions. Each session is carefully crafted and leading exeprts from industry will present it. Day 1, March 21, 2012 T-SQL Rediscovered with SQL Server 2012 – This session is going to bring some of the lesser known enhancements that were brought with SQL Server 2012. When I learned that Jacob Sebastian is going to do this session my reaction to this is DEMO, DEMO and DEMO! Jacob spends hours and hours of his time preparing his session and this will be one of those session that I am confident will be delivered over and over through out the next many events. Catapult your data with SQL Server 2012 Integration Services – Praveen is expert story teller and one of the wizard when it is about SQL Server and business intelligence. He is surely going to mesmerize you with some interesting insights on SSIS performance too. Processing Big Data with SQL Server 2012 and Hadoop – There are three sessions on Big Data at TechEd India 2012. Stephen is going to deliver one of the session. Watching Stephen present is always joy and quite entertaining. He shares knowledge with his typical humor which captures ones attention. I wrote about what is BIG DATA in a blog post. SQL Server Misconceptions and Resolutions – I will be presenting this Session along with Vinod Kumar. READ MORE HERE. Securing with ContainedDB in SQL Server 2012 – Pranab is expert when it is about SQL Server and Security. I have seen him presenting and he is indeed very pleasant to watch. A dry subject like security, he makes it much lively. A Contained Database is a database which contains all the necessary settings and metadata, making database easily portable to another server. This database will contain all the necessary details and will not have to depend on any server where it is installed for anything. You can take this database and move it to another server without having any worries. Day 3, March 23, 2012 Peeling SQL Server like an Onion: Internals Demystified – Vinod Kumar has been writing about this extensively on his other blog post. In recent conversation he suggested that he will be creating very exclusive content for this presentation. I know Vinod for long time and have worked with him along many community activities. I am going to pay special attention to the details. I know Vinod has few give-away planned now for attending the session now only if he shares with us. Speed Up – Parallel Processes and unparalleled Performance – Performance tuning is my favorite subject. I will be discussing effect of parallelism on performance in this session. Here me out, there will be lots of quiz questions during this session and if you get the answers correct – you can win some really cool goodies – I Promise! READ MORE HERE. Keep your database available – AlwaysOn – Balmukund is like an army man. He is always ready to show and prove that he has coolest toys in terms of SQL Server and he knows how to keep them running AlwaysON. Availability groups, Listener, Clustering, Failover, Read-Only replica etc all will be demo’ed in this session. This is really heavy but very interesting content not to be missed. Lesser known facts about SQL Server Backup and Restore – Amit Banerjee – this name is known internationally for solving SQL Server problems in 140 characters. He has already blogged about this and this topic is going to be interesting. A successful restore strategy for applications is as good as their last good known backup. I have few difficult questions to ask to Amit and I am very sure that his unique style will entertain people. By the way, his one of the slide may give few in audience a funny heart attack. Top 5 reasons why you want SQL Server 2012 BI – Praveen plans to take a tour of some of the BI enhancements introduced in the new version. Business Insights with SQL Server is a critical building block and this version of SQL Server is no exception. For the matter of the fact, when I saw the demos he was going to show during this session, I felt like that I wish I can set up all of this on my machine. If you miss this session – you will miss one of the most informative session of the day. Also TechEd India 2012 has a Live streaming of some content and this can be watched here. The TechEd Team is planning to have some really good exclusive content in this channel as well. If you spot me, just do not hesitate to come by me and introduce yourself, I want to remember you! Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, SQLServer, T SQL, Technology Tagged: TechEd, TechEdIn

Read the article

Apache + Codeigniter + New Server + Unexpected Errors

- by ngl5000

Alright here is the situation: I use to have my codeigniter site at bluehost were I did not have root access, I have since moved that site to rackspace. I have not changed any of the PHP code yet there has been some unexpected behavior. Unexpected Behavior: http://mysite.com/robots.txt Both old and new resolve to the robots file http://mysite.com/robots.txt/ The old bluehost setup resolves to my codeigniter 404 error page. The rackspace config resolves to: Not Found The requested URL /robots.txt/ was not found on this server. **This instance leads me to believe that there could be a problem with my mod rewrites or lack there of. The first one produces the error correctly through php while it seems the second senario lets the server handle this error. The next instance of this problem is even more troubling: 'http://mysite.com/search/term/9 x 1-1%2F2 white/' New site results in: Bad Request Your browser sent a request that this server could not understand. Old site results in: The actual page being loaded and the search term being unencoded. I have to assume that this has something to do with the fact that when I went to the new server I went from root level htaccess file to httpd.conf file and virtual server default and default-ssl. Here they are: Default file: <VirtualHost *:80> ServerAdmin webmaster@localhost ServerName mysite.com DocumentRoot /var/www <Directory /> Options +FollowSymLinks AllowOverride None </Directory> <Directory /var/www> Options -Indexes +FollowSymLinks -MultiViews AllowOverride None Order allow,deny allow from all RewriteEngine On RewriteBase / # force no www. (also does the IP thing) RewriteCond %{HTTPS} !=on RewriteCond %{HTTP_HOST} !^mysite\.com [NC] RewriteRule ^(.*)$ http://mysite.com/$1 [R=301,L] RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^(.+)\.(\d+)\.(js|css|png|jpg|gif)$ $1.$3 [L] # index.php remove any index.php parts RewriteCond %{THE_REQUEST} /index\.(php|html) RewriteRule (.*)index\.(php|html)(.*)$ /$1$3 [r=301,L] # codeigniter direct RewriteCond $0 !^(index\.php|assets|robots\.txt|sitemap\.xml|favicon\.ico) RewriteRule ^.*$ index.php [L] </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> Default-ssl File <IfModule mod_ssl.c> <VirtualHost _default_:443> ServerAdmin webmaster@localhost ServerName mysite.com DocumentRoot /var/www <Directory /> Options +FollowSymLinks AllowOverride None </Directory> <Directory /var/www> Options -Indexes +FollowSymLinks -MultiViews AllowOverride None Order allow,deny allow from all RewriteEngine On RewriteBase / RewriteCond %{SERVER_PORT} !^443 RewriteRule ^ https://mysite.com%{REQUEST_URI} [R=301,L] RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^(.+)\.(\d+)\.(js|css|png|jpg|gif)$ $1.$3 [L] # index.php remove any index.php parts RewriteCond %{THE_REQUEST} /index\.(php|html) RewriteRule (.*)index\.(php|html)(.*)$ /$1$3 [r=301,L] # codeigniter direct RewriteCond $0 !^(index\.php|assets|robots\.txt|sitemap\.xml|favicon\.ico) RewriteRule ^.*$ index.php [L] </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/ssl_access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> # SSL Engine Switch: # Enable/Disable SSL for this virtual host. SSLEngine on # Use our self-signed certificate by default SSLCertificateFile /etc/apache2/ssl/certs/www.mysite.com.crt SSLCertificateKeyFile /etc/apache2/ssl/private/www.mysite.com.key # A self-signed (snakeoil) certificate can be created by installing # the ssl-cert package. See # /usr/share/doc/apache2.2-common/README.Debian.gz for more info. # If both key and certificate are stored in the same file, only the # SSLCertificateFile directive is needed. # SSLCertificateFile /etc/ssl/certs/ssl-cert-snakeoil.pem # SSLCertificateKeyFile /etc/ssl/private/ssl-cert-snakeoil.key # Server Certificate Chain: # Point SSLCertificateChainFile at a file containing the # concatenation of PEM encoded CA certificates which form the # certificate chain for the server certificate. Alternatively # the referenced file can be the same as SSLCertificateFile # when the CA certificates are directly appended to the server # certificate for convinience. #SSLCertificateChainFile /etc/apache2/ssl.crt/server-ca.crt # Certificate Authority (CA): # Set the CA certificate verification path where to find CA # certificates for client authentication or alternatively one # huge file containing all of them (file must be PEM encoded) # Note: Inside SSLCACertificatePath you need hash symlinks # to point to the certificate files. Use the provided # Makefile to update the hash symlinks after changes. #SSLCACertificatePath /etc/ssl/certs/ #SSLCACertificateFile /etc/apache2/ssl.crt/ca-bundle.crt # Certificate Revocation Lists (CRL): # Set the CA revocation path where to find CA CRLs for client # authentication or alternatively one huge file containing all # of them (file must be PEM encoded) # Note: Inside SSLCARevocationPath you need hash symlinks # to point to the certificate files. Use the provided # Makefile to update the hash symlinks after changes. #SSLCARevocationPath /etc/apache2/ssl.crl/ #SSLCARevocationFile /etc/apache2/ssl.crl/ca-bundle.crl # Client Authentication (Type): # Client certificate verification type and depth. Types are # none, optional, require and optional_no_ca. Depth is a # number which specifies how deeply to verify the certificate # issuer chain before deciding the certificate is not valid. #SSLVerifyClient require #SSLVerifyDepth 10 # Access Control: # With SSLRequire you can do per-directory access control based # on arbitrary complex boolean expressions containing server # variable checks and other lookup directives. The syntax is a # mixture between C and Perl. See the mod_ssl documentation # for more details. #<Location /> #SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \ # and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \ # and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \ # and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \ # and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \ # or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/ #</Location> # SSL Engine Options: # Set various options for the SSL engine. # o FakeBasicAuth: # Translate the client X.509 into a Basic Authorisation. This means that # the standard Auth/DBMAuth methods can be used for access control. The # user name is the `one line' version of the client's X.509 certificate. # Note that no password is obtained from the user. Every entry in the user # file needs this password: `xxj31ZMTZzkVA'. # o ExportCertData: # This exports two additional environment variables: SSL_CLIENT_CERT and # SSL_SERVER_CERT. These contain the PEM-encoded certificates of the # server (always existing) and the client (only existing when client # authentication is used). This can be used to import the certificates # into CGI scripts. # o StdEnvVars: # This exports the standard SSL/TLS related `SSL_*' environment variables. # Per default this exportation is switched off for performance reasons, # because the extraction step is an expensive operation and is usually # useless for serving static content. So one usually enables the # exportation for CGI and SSI requests only. # o StrictRequire: # This denies access when "SSLRequireSSL" or "SSLRequire" applied even # under a "Satisfy any" situation, i.e. when it applies access is denied # and no other module can change it. # o OptRenegotiate: # This enables optimized SSL connection renegotiation handling when SSL # directives are used in per-directory context. #SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire <FilesMatch "\.(cgi|shtml|phtml|php)$"> SSLOptions +StdEnvVars </FilesMatch> <Directory /usr/lib/cgi-bin> SSLOptions +StdEnvVars </Directory> # SSL Protocol Adjustments: # The safe and default but still SSL/TLS standard compliant shutdown # approach is that mod_ssl sends the close notify alert but doesn't wait for # the close notify alert from client. When you need a different shutdown # approach you can use one of the following variables: # o ssl-unclean-shutdown: # This forces an unclean shutdown when the connection is closed, i.e. no # SSL close notify alert is send or allowed to received. This violates # the SSL/TLS standard but is needed for some brain-dead browsers. Use # this when you receive I/O errors because of the standard approach where # mod_ssl sends the close notify alert. # o ssl-accurate-shutdown: # This forces an accurate shutdown when the connection is closed, i.e. a # SSL close notify alert is send and mod_ssl waits for the close notify # alert of the client. This is 100% SSL/TLS standard compliant, but in # practice often causes hanging connections with brain-dead browsers. Use # this only for browsers where you know that their SSL implementation # works correctly. # Notice: Most problems of broken clients are also related to the HTTP # keep-alive facility, so you usually additionally want to disable # keep-alive for those clients, too. Use variable "nokeepalive" for this. # Similarly, one has to force some clients to use HTTP/1.0 to workaround # their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and # "force-response-1.0" for this. BrowserMatch "MSIE [2-6]" \ nokeepalive ssl-unclean-shutdown \ downgrade-1.0 force-response-1.0 # MSIE 7 and newer should be able to use keepalive BrowserMatch "MSIE [17-9]" ssl-unclean-shutdown httpd.conf File Just a lot of stuff from html5 boiler plate, I will post it if need be Old htaccess file <IfModule mod_rewrite.c> # index.php remove any index.php parts RewriteCond %{THE_REQUEST} /index\.(php|html) RewriteRule (.*)index\.(php|html)(.*)$ /$1$3 [r=301,L] RewriteCond $1 !^(index\.php|assets|robots\.txt|sitemap\.xml|favicon\.ico) RewriteRule ^(.*)/$ /$1 [r=301,L] # codeigniter direct RewriteCond $1 !^(index\.php|assets|robots\.txt|sitemap\.xml|favicon\.ico) RewriteRule ^(.*)$ /index.php/$1 [L] </IfModule> Any Help would be hugely appreciated!!

Search Results

Search found 3008 results on 121 pages for 'solid snake'.

Page 103/121 | < Previous Page | 99 100 101 102 103 104 105 106 107 108 109 110 | Next Page >

- by Rakedko ShotGuns

- by jasondavis

- by White Phoenix

- by Scivitri

- by Chase Florell

- by Abner

- by DaBaer

- by Brandon

- by Scott Szretter

- by S Falken

- by mfinni

- by user317944

- by user3689753

- by John-Brown.Evans

- by Brian Jackett

- by Patrick Liekhus

- by Ben Griswold

- by pinaldave

- by Brian

- by Mysticgeek

- by Stacy Vicknair

- by Brian Jackett

- by Chris Hoffman

- by pinaldave

- by ngl5000

< Previous Page | 99 100 101 102 103 104 105 106 107 108 109 110 | Next Page >