Search Results

Search found 3452 results on 139 pages for 'ur truly friend'.

Page 103/139 | < Previous Page | 99 100 101 102 103 104 105 106 107 108 109 110  | Next Page >

• Asterisk terminating outbound call when picked up, sends 'BYE' message

  - by vo

  I'm running Asterisk 1.6.1.10 / FreePBX 2.5.2.2 and I've got an outbound trunk setup. Everything use to work fine until recently (perhaps due to upgrade to FC12 or other things I'm not sure). Anyway the setup does not appear to have issues registering and setting up the call, RTP packets go both ways and you can hear the ringing from the other side. However it appears that when the call is picked up or thereabouts, the incoming RTP packets cease. Upon closer inspection with Wireshark, there are these particular packets that seem to be the cause: trunk->asterisk SIP/SD Status: 200 OK, with session description asterisk->trunk SIP Request: ACK sip:<phone>@trunk:6889 asterisk->trunk SIP Request: BYE sip:<phone>@trunk:6889 [..about a dozzen RTP packets in/outbound..] trunk->asterisk SIP Status: 200 OK, CSeq: 104 Bye [..outbound RTP continues, phone is silent..] Then the inbound RTP packets cease, however the asterisk logs dont show any activity at this point. The last entry reads 'SIP/ is answered SIP/'. Then when you hangup the extension, you get asterisk->trunk SIP Request: BYE sip:<phone>@trunk:6889 trunk->asterisk SIP Status: 481 Call Leg/Transaction does not exist My trunk peer settings in FreePBX are: username=<user> fromuser=<user> canreinvite=no type=friend secret=<pass> qualify=no [qualify yes produces 401/forbidden messages] nat=yes insecure=very host=<sip trunk gateway> fromdomain=<sip trunk gateway> disallow=all context=from-pstn allow=ulaw dtmfmode=inband Under sip_general_custom.conf i have stunaddr=stun.xten.com externrefresh=120 localnet=192.168.1.1/255.255.255.0 nat=yes Whats causing Asterisk to prematurely end the call and still think the call is in progress? I have no idea where to look next.

  Read the article

• MaxTotalSizeInBytes - Blind spots in Usage file and Web Analytics Reports

  - by Gino Abraham

  Originally posted on: http://geekswithblogs.net/GinoAbraham/archive/2013/10/28/maxtotalsizeinbytes---blind-spots-in-usage-file-and-web-analytics.aspx http://blogs.msdn.com/b/sharepoint_strategery/archive/2012/04/16/usage-file-and-web-analytics-reports-with-blind-spots.aspx In my previous post (Troubleshooting SharePoint 2010 Web Analytics), I referenced a problem that can occur when exceeding the daily partition size for the LoggingDB, which generates the ULS message “[Partition] has exceeded the max bytes”. Below, I wanted to provide some additional info on this particular issue and help identify some options if this occurs. As an aside, this post only applies if you are missing portions of Usage data - think blind spots on intermittent days or user activity regularly sparse for the afternoon/evening. If this fits your scenario - read on. But if Usage logs are outright missing, go check out my Troubleshooting post first.  Background on the problem:The LoggingDB database has a default maximum size of ~6GB. However, SharePoint evenly splits this total size into fixed sized logical partitions – and the number of partitions is defined by the number of days to retain Usage data (by default 14 days). In this case, 14 partitions would be created to account for the 14 days of retention. If the retention were halved to 7 days, the LoggingDBwould be split into 7 corresponding partitions at twice the size. In other words, the partition size is generally defined as [max size for DB] / [number of retention days].Going back to the default scenario, the “max size” for the LoggingDB is 6200000000 bytes (~6GB) and the retention period is 14 days. Using our formula, this would be [~6GB] / [14 days], which equates to 444858368 bytes (~425MB) per partition per day. Again, if the retention were halved to 7 days (which halves the number of partitions), the resulting partition size becomes [~6GB] / [7 days], or ~850MB per partition.From my experience, when the partition size for any given day is exceeded, the usage logging for the remainder of the day is essentially thrown away because SharePoint won’t allow any more to be written to that day’s partition. The only clue that this is occurring (beyond truncated usage data) is an error such as the following that gets reported in the ULS:04/08/2012 09:30:04.78    OWSTIMER.EXE (0x1E24)    0x2C98    SharePoint Foundation    Health    i0m6     High    Table RequestUsage_Partition12 has 444858368 bytes that has exceeded the max bytes 444858368It’s also worth noting that the exact bytes reported (e.g. ‘444858368’ above) may slightly vary among farms. For example, you may instead see 445226812, 439123456, or something else in the ballpark. The exact number itself doesn't matter, but this error message intends to indicates that the reporting usage has exceeded the partition size for the given day.What it means:The error itself is easy to miss, which can lead to substantial gaps in the reporting data (your mileage may vary) if not identified. At this point, I can only advise to periodically check the ULS logs for this message. Down the road, I plan to explore if [Developing a Custom Health Rule] could be leveraged to identify the issue (If you've ever built Custom Health Rules, I'd be interested to hear about your experiences). Overcoming this issue also poses a challenge, with workaround options including:Lower the retentionBecause the partition size is generally defined as [max size] / [number of retention days], the first option is to lower the number of days to retain the data – the lower the retention, the lower the divisor and thus a bigger partition. For example, halving the retention from 14 to 7 days would halve the number of partitions, but double the partition size to ~850MB (e.g. [6200000000 bytes] / [7 days] = ~850GB partitions). Lowering it to 2 days would result in two ~3GB partitions… and so on.Recreate the LoggingDB with an increased sizeThe property MaxTotalSizeInBytes is exposed by OM code for the SPUsageDefinition object and can be updated with the example PowerShell snippet below. However, updating this value has no immediate impact because this size only applies when creating a LoggingDB. Therefore, you must create a newLoggingDB for the Usage Service Application. The gotcha: this effectively deletes all prior Usage databecause the Usage Service Application can only have a single LoggingDB.Here is an example snippet to update the "Page Requests" Usage Definition:$def=Get-SPUsageDefinition -Identity "page requests" $def.MaxTotalSizeInBytes=12400000000 $def.update()Create a new Logging database and attach to the Usage Service Application using the following command: Get-spusageapplication | Set-SPUsageApplication -DatabaseServer <dbServer> -DatabaseName <newDBname> Updated (5/10/2012): Once the new database has been created, you can confirm the setting has truly taken by running the following SQL Query (be sure to replace the database name in the following query with the name provided in the PowerShell above)SELECT * FROM [WSS_UsageApplication].[dbo].[Configuration] WITH (nolock) WHERE ConfigName LIKE 'Max Total Bytes - RequestUsage'

  Read the article

• Take a chance !

  - by Hartmut Wiese

  Hi everybody, Later today I am going to reach out to the JDE Partner in EMEA I am already in contact with and ask for participation and collaboration within the new EMEA JDE Partner Community. I am very excited about this community and I really believe we will have much more success in the future selling and implementing JDEdwards in this large region. For those who don´t know me yet ... I am really a long time in the JDEdwards business. I have been a JDE PreSales Consultant and joined JDEdwards in 1998 in Germany. After JDEdwards/PeopleSoft was aquired by Oracle I changed my role and become responsible on an EMEA level for the Oracle Accelerate and the Oracle Business Accelerator program. A lot of you are already know me ... and hopefully believe and trust me as well. Within the last five months I talked to approx. 60 partners already face-to-face during the various events I attended. We had two PreSales Universities delievered already and I have been to one JDE Exsite event, a JDE Executive Forum, two User groups events and one JDE Partner Event. Again approximately 60+ partner discussions and everybody likes the idea of the community and how I am going to run this in the future. At the JDEdwards UK User Group event (NOV 13) there was an external speaker talking about risk. It was a very good speech. One key element of his speech was that a sequence of (small) failures might lead to a big success. He gave very good examples from the history not software related at all but as a results some of the well done individuals everybody knows today started very small and they failed several times before they become successful. But these persons did not gave up and in the long run they win and succeeded. I really spent some time reflecting this to our business as of today. My intention to write these lines is to convince each partner out there to think about investing in JDEdwards TODAY. There are currently a number of potential investment ideas on the table for you. We have a very strong and powerful ERP System. We have advantages against all our competitors. Each partner has the ability to create his own SaaS model and deliver individual services to the customers. We also have three Business Accelerators available which really speeds up the implementation by still having full flexibility to change for example any processing option if needed. A huge number of customers are on old releases globally and think about upgrading. New technology makes new business processes available (e.g. iPad). Oracle is a pretty much forward looking company and we build tools and products. In the area of JDEdwards our partners are combining the Oracle tools and products and bringing the value to the customers. At one point in time you have decided to run your business on your own and to become a JDE/PSFT/ORCL partner. This was a risk of course at that point of time. You did not fail and this is very good of course. Business has changed and Oracle has the product and tools for you to become even more successful in the future but it is a very good time for you to take a risk again. I am not able to promise you anything but the situation is very good. You might not win every deal or increase your margin immediately but I truly believe you will find new ways of doing your business in the future by adopting some of our ideas. The only person who can stop you ... is you. Please try something new/different. Success sometimes needs some time and initial failures but if you never failed - you have never lived. To get support during this phase please share your doubts, thoughts, experiences inside the new JDEdwards community and learn from others who went to similar processes. Please join here. Take care and best regards Hartmut Wiese

  Read the article

• Join our Marketing Intelligence Team in Dublin!

  - by jessica.ebbelaar

  Do you want to work with the brightest minds in the industry? Want to be part of a global team that’s changing the way the world does business? Then Oracle is the place for YOU. Join now as a Marketing Intelligence Representative. You will have the opportunity to develop within the role through working alongside the Business Development, Sales and Marketing teams within Oracle. The Marketing Intelligence Group is viewed as a true talent pool for the Business Development and Sales Teams. Oracle offers a structured training programme for Marketing Intelligence Representatives and Business Development Consultants including our approved sales certified training methodology along with regular product training. Miriam started her career as a Marketing Intelligence Representative six years ago, and shares what she has learned and how her career is progressing. My Career Path at Oracle: June 2005 – October 2005: Profiler in the Marketing Intelligence Team November 2005 - October 2006: Team Leader for MIT November 2006 - February 2008: Business Development Consultant Iberia March 2008 - December 2010: Lead Management Specialist Currently: Sales Program Manager for Iberia & Benelux What did you learn from your role in the Market Intelligence Team Being a Profiler helped me to understand how an organisation works, from the beginning to the end. It is like being in University but being paid! The three key things I learnt in this role are: Knowledge of customers: You are on the phone with over 70 customers daily. Not only does this give you an overview of the IT infrastructure of the customers companies but also how to manage their questions and rejections. Essentially you are learning how to convert their pain and complaints into business opportunities. Knowledge of Oracle: As a Profiler you get an excellent overview of how Oracle works internally, from Marketing to Sales, without forgetting the Operations Team. Knowledge about yourself: As a Profiler I learnt how to work outside of my comfort zone, there is a new challenge almost every day but Oracle are there to support you every step of the way. Oracle really invests in developing the MIT Team and as a Profiler you can expect product and sales training on a monthly basis. How did you progress from MIT to Business Development Group (BDG)? I made sure that my manager knew from the very beginning that I was keen to progress at Oracle and I was set very clear objectives to help me reach my goal.  My manager was very supportive and ensured I received all the training I needed. After I became a Team Leader of Profiling, I moved to an Iberia BDG position. How you feel your experience in MI has helped you in your current role? I truly believe that the MI position gives you a great overview of Oracle and this has really helped me in my current position.  I am the Sales Program Manager for IBERIA & Benelux and in my campaigns I need to target the right companies and the right job specs.  My time in the Market Intelligence team really helped me to understand how to focus and target my campaigns so I know I don’t miss any business opportunities! How would you sum up your Oracle experience? Oracle is a big organisation with big opportunities. With the right skills and with the great training programs that Oracle offer, the only limit is you! If you have any questions related to this article feel free to contact [email protected] You can find all our job opportunities via http://campus.oracle.com. Tags van Technorati: Marketing Intelligence,Benelux,Iberia,Profiler,Business Development,Sales Representatives,BDG,Business Development Group,opportunities,Oracle

  Read the article

• Blinking power button

  - by Mike Ramsey

  A friend asked me to look at his Gateway DX4640 desktop. When he presses the power button, power goes to the mobo (NVIDIA nForce 630i MCP73PV, GeForce 7100 chipset) and the CPU fan starts spinning. The power button slowely blinks on and off (blue) and the screen briefly says no signal and then goes black. And nothing else; no post code beeps. My initial two conjectures were: 1. Vista was stuck in sleep/hibernation mode, or 2. A power off had left the mobo in a bad state. The fix for both is to: a) Unplug the AC power cord b) hold the power button for 30 second to fully discharge the mobo It didn't help. I left the system unplugged from AC power for an hour. No change. I am out of ideas. Has anybody seen anything like this before? What does a blinking blue power button mean? How can I get more data points to guide trouble shooting? --Thank you, --Mike

  Read the article

• Not playing .mov files in WMP, not loading .mov files in Windows Live Movie Maker. What am I missing?

  - by royatl

  My friend needs to create a video and she has some source files that are .MOV format. I assume they are h.264. She can view the files with QuickTime. She has a laptop running Vista, and a just-downloaded version of Windows Live Movie Maker (which I'll call LMM for short). LMM shows an 'X' icon when she tries to add one of these files to it. My machine runs Windows 7 Pro, and a slightly earlier build of LMM and has no problems editing video with these source files. I assume she's missing a codec but what can I tell her? I've looked at the answer that mentions a QuickTime DirectShow Source Filter Plugin. It mentions only playback through WMP, not editing via LMM, but is that what she needs? I didn't have to load anything like that. That project's now done (she punted and used iMovie on a Mac). But I did gain another clue. She could play a 720p .MOV file, but these were 1920x1080 files.

  Read the article

• SQL SERVER – #TechEdIn – Presenting Tomorrow on Speed Up! – Parallel Processes and Unparalleled Performance at TechEd India 2012

  - by pinaldave

  Performance tuning is always a very hot topic when it is about SQL Server. SQL Server Performance Tuning is a very challenging subject that requires expertise in Database Administration and Database Development. I always have enjoyed talking about SQL Server Performance tuning subject. However, in India, it’s actually the very first time someone is presenting on this interesting subject, so this time I had the biggest challenge to present this session. Frequently enough, we get these two kind of questions: How to turn off parallelism as it is reducing performance? How to turn on parallelism as I want more performance? The reality is that not everyone knows what exactly is needed by their system. In this session, I have attempted to answer this very question. I’ve decided to provide a balanced view but stay away from theory, which leads us to say “It depends”. The session will have a clear message about this towards its end. Deck Details Slides: 45+ Demos: 7+ Bonus Quiz: 5 Images: 10+ Session delivery time: 52 Mins + 8 Mins of Q & A I have presented this session a couple of times to my friends and so far have received good feedback. Oftentimes, when people hear that I am going to present 45 slides, they all say it is too much to cover. However, when I am done with the session the usual reaction is that I truly gave justice to those slides. Action Item Here are a few of the action items for all of those who are going to attend this session: If you want to attend the session, just come early. There’s a good chance that you may not get a seat because right before me, there is a session from SQL Guru Vinod Kumar. He performs a powerful delivery of million concepts in just a little time. Quiz. I will be asking few questions during the session as well as before the session starts. If you get the correct answer, I will give unique learning material for you. You may not want to miss this learning opportunity at any cosst. Session Details Title: Speed Up! – Parallel Processes and Unparalleled Performance (Add to Calendar) Abstract: “More CPU, More Performance” – A  very common understanding is that usage of multiple CPUs can improve the performance of the query. To get a maximum performance out of any query, one has to master various aspects of the parallel processes. In this deep-dive session, we will explore this complex subject with a very simple interactive demo. Attendees will walk away with proper understanding of CX_PACKET wait types, MAXDOP, parallelism threshold and various other concepts. Date and Time: March 23, 2012, 12:15 to 13:15 Location: Hotel Lalit Ashok - Kumara Krupa High Grounds, Bengaluru – 560001, Karnataka, India. Add to Calendar Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Interview Questions and Answers, SQL Query, SQL Server, SQL Tips and Tricks, SQLServer, T SQL, Technology

  Read the article

• Windows 7 - User profile corrupted on standby/hibernate

  - by Dogbert

  I have a friend who uses Windows 7 for her home PC. She has a RAID1 array that is using up-to-date Intel Matrix storage drivers, and the entire array is backed up to a separate internal SATA HDD via Acronis True Image every night. Over the weekends, she lets her machine go into suspend after 4 hours of inactivity, and then later into hibernation after 6 hours of inactivity. Her Acronis backup system does nightly incremental backups, and full backups every Saturday night. She also has AVG Free Antivirus installed which does full scans every Monday. So far, on two occasions, on Sunday morning, her user profile is corrupt. I couldn't find any solution that allowed me to repair her profile, so I end up having to (as suggested by MS Knowledge Base, http://windows.microsoft.com/en-us/windows7/fix-a-corrupted-user-profile ;, Yep, no solution to fixing it, just clobber the whole thing) recreating her profile, then copying over data, recreating her Outlook profile, reconfiguring all third-party applications, etc. It's a real nightmare, and takes 4 hours to do each time. Are there any suggestions on how to resolve this profile corruption? This was happening even before the RAID/Acronis solution was in place, but I thought I'd provide as much information as possible.

  Read the article

• AVCHD MTS h264 1080p file with choppy playback in Linux

  - by marc

  When I'm trying play video files from my camera: Seems stream 0 codec frame rate differs from container frame rate: 50.00 (50/1) -> 50.00 (50/1) Input #0, mpegts, from '00027.MTS': Duration: 00:00:38.88, start: 2.884289, bitrate: 16945 kb/s Program 1 Stream #0.0[0x1011]: Video: h264 (High), yuv420p, 1920x1080 [PAR 1:1 DAR 16:9], 50 fps, 50 tbr, 90k tbn, 50 tbc Stream #0.1[0x1100]: Audio: ac3, 48000 Hz, stereo, s16, 256 kb/s … on my Linux computer (Ubuntu 12.04), I get choppy playback. It's completly unusable... I tried: Totem VLC mplayer The result is always same issue. I sent the same video file to a friend who has ubuntu 10.04 to test, and he also has the same issue. He has Windows 7, and confirms that on Windows, the video work well. I have an Intel® Core™2 CPU 6300 @ 1.86GHz × 2 with GF 9600 GT, with closed NVIDIA drivers. This is not any kind of issue with big files playing slow from an HDD issue. I have an SSD drive! I spent the last days and nights, trying hundreds of commands for ffmpeg, handbrake, mencoder... Any of them won't let me create a file with enough quality. I downloaded few movies from YouTube in 1080p, and playback worked well without any big pixels and choppiness. I would like have highest possible quality, I will put following files onto a Blu-ray disk so I don't need to compress them to get a smaller size. I just want smoth playback on my Linux box. On Windows, the same file is working well.

  Read the article

• SQL Saturday 27 (Portland, Oregon)

  - by BuckWoody

  I’m sitting in the Seattle airport, waiting for my flight to Silicon Valley California for the SQL Server 2008 R2 Launch Event. By some quirk of nature, they are asking me to Emcee the event – but that’s another post entirely.   I’m reflecting on the SQL Saturday 27 event that was just held in Portland, Oregon this last Saturday. These are not Microsoft-sponsored events – it’s truly the community at work. Think of a big user-group meeting – I mean REALLY big – held in a central location, like at a college (as ours was) or some larger, inexpensive venue like that. Everyone there is volunteering – it’s my own money and time to drive several hours to a hotel for the night, feed myself and present. It’s their own time and money for the folks that organize the event – unless a vendor or two steps in to help. It’s their own time and money for the attendees to drive a long way, spend the night and their Saturday to listen to the speakers. Why do all this?   Because everybody benefits. Every speaker learns something new, meets new people, and reaches a new audience. Every volunteer does the same. And the attendees? Well, it’s pretty obvious what they get. A 7Am to 10PM extravaganza of knowledge from every corner of the product. In fact, this year the Portland group hooked up with the CodeCamp folks and held a combined event. We had over 850 people, and I had everyone from data professionals to developers in my sessions.   So I’ll take this opportunity to do two things: to say “thank you” to all of the folks who attended, from those who spoke to those who worked and those who came to listen, and to challenge you to attend the next SQL Saturday anywhere near you. You can find the list here: http://www.sqlsaturday.com/. Don’t see anything in your area? Start one! The PASS folks have a package that will show you how. Sure, it’s a big job, but the key is to get as many people helping you as possible. Even if you have only a few dozen folks show up the first time, no worries. The first events I presented at had about 20 in the room. But not this week.   See you at the Launch Event if you’re near the San Francisco area tomorrow, and see you at the Redmond SQL Saturday and TechEd if not.   Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• Get the Picture: Pinterest for Marketers

  - by Mike Stiles

  When trying to determine on which networks to conduct social marketing, the usual suspects immediately rise to the top; Facebook & Twitter, then LinkedIn (especially if you’re B2B), then maybe some Google Plus to hedge SEO bets.  So at what juncture do brands get excited about Pinterest? Pinterest has been easy for marketers to de-prioritize thanks to the perception its usage is so dominated by women. Um, what’s wrong with that? Women make an estimated 85% of all consumer purchases. So if there are indeed over 30 million US women active on it monthly, and they do 92% of the pinning, and 84% are still active on it after 4 years, when did an audience of highly engaged, very likely sales conversions become low priority? Okay, if you’re a tech B2B SaaS product like the Oracle Social Cloud, Pinterest may not be where you focus. But if you operate in the top Pinterest categories, which are truly far-reaching, it’s time to take note of Pinterest’s performance to date: 40.1 million monthly users in the US (eMarketer). Over 30 billion pins, half of which were pinned in the last 6 months. (Big momentum) 75% of usage is on their mobile app. (In solid shape for the mobile migration) Pinterest sharing grew 58% in 2013, beating Facebook, Twitter, or LinkedIn. (ShareThis) Pinterest is the 3rd most popular sharing platform overall (over email), with 48% of all sharing on tablets. Users referred by Pinterest are 10% more likely to buy on e-commerce sites and tend to spend twice that of users coming from Facebook. (Shopify) To be fair, brands haven’t had any paid marketing opportunities on that platform…until recently. Users are seeing Promoted Pins in both category and search feeds from rollout brands like Gap, ABC Family, Ziploc, and Nestle. Are the paid pins annoying users? It seems more so than other social networks, they’re fitting right in to the intended user experience and being accepted, getting almost as many click-throughs as user pins. New York Magazine’s Kevin Roose laid it out succinctly; Pinterest offers a place that’s image-centric, search-friendly, makes things easy to purchase, makes things easy to share, and puts users in an aspirational mood to buy. Pinterest is very confident in the value of that combo and that audience, with CPM rates 5x that of the most expensive Facebook ad, plus (at least for now) required spending commitments and required pin review by Pinterest for quality. The latest developments; a continued move toward search and discovery with enhancements like Guided Search to help you hone in on what interests you, Custom Categories, and the rumored Visual Search that stands to be a liberation from text. And most recently, Pinterest has opened up its API so brands can get access to deeper insights into the best search terms and categories in which to play ball, as well as what kinds of pins stand to perform best in those areas. As we learned in our rundown this week of Social Media Examiner’s Social Media Marketing Industry Report, around 50% of marketers specifically intend on upping their use of Pinterest. If you’re a big believer in fishing where the fish are, that’s probably an efficient position to take. @mikestiles @oraclesocialPhoto: Adam Lambert_Gorwyn, freeimages.com

  Read the article

• transparent git-svn gateway

  - by azatoth

  Currently we have an subversion repository with the following layout: /trunc /group1 /proj1 /proj2 group2 /proj3 /etc.. /tags /group1 /proj1 /proj2 group2 /proj3 /etc.. /branch /anything temporary I believe this is an rather bad layout, but at the moment it's difficult to change it fully. Personally I dislike subversion, due mostly the long time it takes to check history, and also that branching and merging are cumbersome etc. so I really want to use git instead. Sadly we cant just switch to git as the mental capacity for some might be to overwhelming, so I was looking into git-svn to see if I could practically use that to solve the issue. Sadly that directly ends up in a bad situation as I want to break down each project into one git repo, and I don't want to have to recreate the git-svn checkout on each computer I work on. so I though perhaps there is an possibility to create some sort of transparent git ?? svn proxy/gateway, so that an push to that repo "commits" to the svn repo, and an commit to the svn repo updates the git repo. Google hasn't been my friend, have only found generic usage help to use git-svn, so I ask you if you have some good ideas to accomplish this.

  Read the article

• pppd disconnects from 3G, doesn't reconnect, w/ persist set

  - by bytenik

  I am trying to configure pppd to connect to a 3G network (Sprint, in this case) and then stay connected, reconnecting automatically if the remote connection is terminated. I have enabled the persist option. My configuration file is as follows: hide-password noauth connect "/usr/sbin/chat -v -f /etc/chatscripts/cellular" debug /dev/cell 921600 defaultroute noipdefault user " " persist maxfail 0 lcp-echo-failure 10 lcp-echo-interval 60 holdoff 5 However, when the peer disconnects the connection, pppd often waits a long time (substantially more than my holdoff) to reconnect the modem -- if it ever reconnects at all! An example log showing this: May 23 05:17:24 00270e0a8888 pppd[2408]: rcvd [LCP TermReq id=0x26] May 23 05:17:24 00270e0a8888 pppd[2408]: LCP terminated by peer May 23 05:17:24 00270e0a8888 pppd[2408]: Connect time 60.1 minutes. May 23 05:17:24 00270e0a8888 pppd[2408]: Sent 0 bytes, received 0 bytes. May 23 05:17:24 00270e0a8888 pppd[2408]: Script /etc/ppp/ip-down started (pid 2456) May 23 05:17:24 00270e0a8888 pppd[2408]: sent [LCP TermAck id=0x26] May 23 05:17:24 00270e0a8888 pppd[2408]: Script /etc/ppp/ip-down finished (pid 2456), status = 0x0 May 23 05:17:24 00270e0a8888 pppd[2408]: Hangup (SIGHUP) May 23 05:17:24 00270e0a8888 pppd[2408]: Modem hangup May 23 05:17:24 00270e0a8888 pppd[2408]: Connection terminated. May 23 05:17:24 00270e0a8888 pppd[2408]: Terminating on signal 15 May 23 05:17:24 00270e0a8888 pppd[2408]: Exit. May 23 06:08:07 00270e0a8888 pppd[2500]: pppd 2.4.5 started by root, uid 0 May 23 06:08:10 00270e0a8888 pppd[2500]: Script /usr/sbin/chat -v -f /etc/chatscripts/cellular finished (pid 2530), status = 0x0 May 23 06:08:10 00270e0a8888 pppd[2500]: Serial connection established. May 23 06:08:10 00270e0a8888 pppd[2500]: using channel 11 The disconnect at the request of the peer occurs at 5:17, but the reconnect didn't happen until 6:08. I had a friend monitoring the server so I'm not certain that this wasn't a manual reconnection. Either way, it either took almost an hour to reconnect or never reconnected. Shouldn't persist + holdoff 5 cause this to automatically reconnect after 5 seconds of the link terminating?

  Read the article

• Diagnosing PCI issues

  - by dtsazza

  I'm upgrading a PC for a friend, and have run into a problem with upgrading the motherboard. I've been assembling custom PCs for the best part of a decade now, so I'm happy enough with the basics at the very least. The motherboard, CPU and graphics card were all updated at once - after this was done, the machine POSTs but the PCI wireless card, as well as the PCI-E graphics card, do not seem to be recognised at all by the system. No trace of them anywhere in the BIOS, or the POST output, or in Windows. I booted into Linux and ran an lspci which also showed up no sign of them. What is the best step to go about diagnosing this? Is it likely/feasible that the motherboard's PCI bus is just defective and it needs to be RMAed? Are there any other common gotchas that might cause these symptoms? For reference, the components in question are: CPU: Celeron E1400 Motherboard: Gigabyte GA-G31M-ES2L Graphics card: TBC (a low end card from a couple of years ago; worked flawlessly before the mobo change) PCI WNIC: Edimax 7128G Thanks in advance for any help.

  Read the article

• database design help for game / user levels / progress

  - by sprugman

  Sorry this got long and all prose-y. I'm creating my first truly gamified web app and could use some help thinking about how to structure the data. The Set-up Users need to accomplish tasks in each of several categories before they can move up a level. I've got my Users, Tasks, and Categories tables, and a UserTasks table which joins the three. ("User 3 has added Task 42 in Category 8. Now they've completed it.") That's all fine and working wonderfully. The Challenge I'm not sure of the best way to track the progress in the individual categories toward each level. The "business" rules are: You have to achieve a certain number of points in each category to move up. If you get the number of points needed in Cat 8, but still have other work to do to complete the level, any new Cat 8 points count toward your overall score, but don't "roll over" into the next level. The number of Categories is small (five currently) and unlikely to change often, but by no means absolutely fixed. The number of points needed to level-up will vary per level, probably by a formula, or perhaps a lookup table. So the challenge is to track each user's progress toward the next level in each category. I've thought of a few potential approaches: Possible Solutions Add a column to the users table for each category and reset them all to zero each time a user levels-up. Have a separate UserProgress table with a row for each category for each user and the number of points they have. (Basically a Many-to-Many version of #1.) Add a userLevel column to the UserTasks table and use that to derive their progress with some kind of SUM statement. Their current level will be a simple int in the User table. Pros & Cons (1) seems like by far the most straightforward, but it's also the least flexible. Perhaps I could use a naming convention based on the category ids to help overcome some of that. (With code like "select cats; for each cat, get the value from Users.progress_{cat.id}.") It's also the one where I lose the most data -- I won't know which points counted toward leveling up. I don't have a need in mind for that, so maybe I don't care about that. (2) seems complicated: every time I add or subtract a user or a category, I have to maintain the other table. I foresee synchronization challenges. (3) Is somewhere in between -- cleaner than #2, but less intuitive than #1. In order to find out where a user is, I'd have mildly complex SQL like: SELECT categoryId, SUM(points) from UserTasks WHERE userId={user.id} & countsTowardLevel={user.level} groupBy categoryId Hmm... that doesn't seem so bad. I think I'm talking myself into #3 here, but would love any input, advice or other ideas. P.S. Sorry for the cross-post. I wrote this up on SO and then remembered that there was a game dev-focused one. Curious to see if I get different answers one place than the other....

  Read the article

• How Do You Actually Model Data?

  Since the 1970’s Developers, Analysts and DBAs have been able to represent concepts and relations in the form of data through the use of generic symbols.  But what is data modeling?  The first time I actually heard this term I could not understand why anyone would want to display a computer on a fashion show runway. Hey, what do you expect? At that time I was a freshman in community college, and obviously this was a long time ago.  I have since had the chance to learn what data modeling truly is through using it. Data modeling is a process of breaking down information and/or requirements in to common categories called objects. Once objects start being defined then relationships start to form based on dependencies found amongst other existing objects.  Currently, there are several tools on the market that help data designer actually map out objects and their relationships through the use of symbols and lines.  These diagrams allow for designs to be review from several perspectives so that designers can ensure that they have the optimal data design for their project and that the design is flexible enough to allow for potential changes and/or extension in the future. Additionally these basic models can always be further refined to show different levels of details depending on the target audience through the use of three different types of models. Conceptual Data Model(CDM)Conceptual Data Models include all key entities and relationships giving a viewer a high level understanding of attributes. Conceptual data model are created by gathering and analyzing information from various sources pertaining to a project during the typical planning phase of a project. Logical Data Model (LDM)Logical Data Models are conceptual data models that have been expanded to include implementation details pertaining to the data that it will store. Additionally, this model typically represents an origination’s business requirements and business rules by defining various attribute data types and relationships regarding each entity. This additional information can be directly translated to the Physical Data Model which reduces the actual time need to implement it. Physical Data Model(PDMs)Physical Data Model are transformed Logical Data Models that include the necessary tables, columns, relationships, database properties for the creation of a database. This model also allows for considerations regarding performance, indexing and denormalization that are applied through database rules, data integrity. Further expanding on why we actually use models in modern application/database development can be seen in the benefits that data modeling provides for data modelers and projects themselves, Benefits of Data Modeling according to Applied Information Science Abstraction that allows data designers remove concepts and ideas form hard facts in the form of data. This gives the data designers the ability to express general concepts and/or ideas in a generic form through the use of symbols to represent data items and the relationships between the items. Transparency through the use of data models allows complex ideas to be translated in to simple symbols so that the concept can be understood by all viewpoints and limits the amount of confusion and misunderstanding. Effectiveness in regards to tuning a model for acceptable performance while maintaining affordable operational costs. In addition it allows systems to be built on a solid foundation in terms of data. I shudder at the thought of a world without data modeling, think about it? Data is everywhere in our lives. Data modeling allows for optimizing a design for performance and the reduction of duplication. If one was to design a database without data modeling then I would think that the first things to get impacted would be database performance due to poorly designed database and there would be greater chances of unnecessary data duplication that would also play in to the excessive query times because unneeded records would need to be processed. You could say that a data designer designing a database is like a box of chocolates. You will never know what kind of database you will get until after it is built.

  Read the article

• A story of Murphy&ndash;my technical issues at TechDays Switzerland #chtd

  - by Laurent Bugnion

  I had two sessions at the recent Swiss TechDays. While the first one (Advanced Development for Windows Phone 8) went extremely well (I think), I had a very annoying technical issue in the beginning of my second session. First let me add that I talked to Microsoft about that and I hope they will change a few things in the room assignment for next year. My two sessions were one right after the other, with only 15 minutes break to change room. I don’t mind having two sessions so close from each other, but I would really like them to be in the same room in order to avoid having to move my laptops (plural, that will become important later) and redoing the tech check. That being said, I am guilty of not checking where my talks would be before the day before the conference, and when I did notice, it was too late to change it. After my first session, I quickly moved to the other room and setup my main laptop, a Dell Precision. We tested the video output (VGA) and didn’t notice anything special. The projectors are using a fairly high resolution (kudos to the Basel conference center for not having old school 1024x768 projectors anymore, that makes Blend really hard to demo ;) but since everything went great during the first talk, I was not worried. In fact I even had some time to chat with some early attendees about my Microsoft Surface and the Samsung Slate 7, which I had carried with me in addition to the Precision. I just thought it would be nice to show the hardware that Windows 8 can run on, without thinking any further. When the session started, I immediately noticed that the main screen was not showing anything. I thought I had just forgotten to switch to “duplicate” for the video output, and did that with a quick Win-P. However it didn’t “hold”. After 2 seconds, it reverted back to a black display for my attendees. Then I started to really worry. We tried everything, switching from VGA to HDMI, changing the resolution, setting the projector as primary display, but nothing did the trick. The projector was just refusing to show my screen. Now, to show you how despaired I started to be, I even considered using the “extend” setting (which worked just fine), and to use one of the feedback monitors on the floor but really it was super cumbersome. Eventually, my last resort arrived: I started my Samsung Slate 7, which by chance has Visual Studio 12 and Blend 5 installed, plugged the HDMI projector in the dock (yes, I had the dock with me, which I usually don’t!), connected it to internet (had to enter a long password for that), loaded the source code from my main machine using a USB stick and…. finally started to give my presentation. All in all I think we lost about 10 minutes. Amongst the most horrible minutes of my whole life, truly (yes I am blessed, I didn’t have that many horrible minutes in my life ;) I really want to apologize to my attendees. We joked a bit during the attempts to resolve the issue, the reactions I had after the session were all very nice and sympathetic. Only a handful of people left my session while I was having the issues, and I really don’t blame them (who knew how long the problem would last!!). But still, I probably talked at more than 60 sessions over the years, and this was by far my most painful moment. What did I learn? So what did I learn from this? Well from now on I will always have my slate ready with the latest source code, internet connection and every tool I might need during the presentation. This way, if I detect even a hint that the Precision might not work, I will just switch to the Slate. The experience of presenting on the slate is actually not bad at all, it is just a bit slow for my taste, but it does work. By the way, I will be posting the code and slides for my sessions very soon, I just need to “clean it and zip it”. Stay tuned, and thanks again for your patience in that horrible circumstance. Cheers Laurent   Laurent Bugnion (GalaSoft) Subscribe | Twitter | Facebook | Flickr | LinkedIn

  Read the article

• Wisdom Lies in Collaborative Power and Intelligence

  - by kellsey.ruppel

  By Alakh Verma, Director, Platform Technology Solutions   In my recent blog posts, I shared insights on Predictive Analytics (Will Predictive Analytics at 'Speed of Thoughts' Help Businesses?), Real Time Decisions (How critical are Real Time decisions in business today?) and their significance in our lives in general and in businesses today. In the current business paradigm shift- with evolutionary social business, it is paramount that businesses look for wisdom in collaborative power and intelligence and equip their employees with the tools to engage with one another. There is an old time saying that 5 sticks tied together are stronger and unable to break as opposed to an individual stick. We have recently witnessed the power of ordinary people uniting together and fought collaboratively using Facebook and Twitter to topple down dictators in Tunisia, Egypt and Libya—and are threatening absolute rule in Syria. And an India one man’s (Anna Hazare) campaign against corruption went viral, bringing thousands to the streets in support. As anyone who has worked in a sizeable organization knows, there is no guarantee that the organization as a whole will perform efficiently and achieve its goals, even if each employee is individually efficient and every team has a high level of productivity. To achieve enterprise productivity, it is necessary not only for individuals and groups to “do things right” by working productively but also for the enterprise as a whole to “do the right things” - form the right teams, make the right decisions, allocate resources correctly, and effectively coordinate activities across the entire organization. Most organizations fall short of the optimal level of enterprise productivity because of one or more of these reasons, all at a great cost to the business.  They are disconnected from themselves with various parts of the organization unintentionally working at cross-purposes with each other.  Information that exists is not getting shared or reused.  Human talent is not being applied where it is most needed.  The same problems are being solved repeatedly by multiple groups. Intelligent collaboration through automated business processes has the ability to alter the course of any important business activity, with a potentially dramatic impact on the financial performance of the business. Whether it is a simple email exchange, a physical or virtual meeting, a task force, or a large-scale project, the activity is inherently collaborative.  In fact, collaboration can be defined as the work that takes place among people when a business process is not pre-determining how the work should take place. Collaboration is many things: information sharing, brainstorming, problem solving, best practice negotiation, innovation, coordination of activity, alignment of purpose, and so forth.  Collaboration is the “white space” between the business processes; it is the glue that holds an organization together, and the lubricant that allows the machinery to keep running.  Real time search and collaborative capabilities of the right people with the right content supported by defined processes will provide unparallel wisdom in the organization in the most competitive business environment today. Interestingly, technologies such as Oracle WebCenter offer these capabilities in our Web based business transactions and compliment in the overall collaborative intelligence and power to truly transform organizations to social businesses. Looking to learn more about engaging your employees to collaborate together and providing a complete user experience for your customers? You won't want to miss our webcast today! Drive Online Engagement with Intuitive Portals and Websites

  Read the article

• sata hard drive failed

  - by M. Shehryar

  Dear friend, initially my dual core PC started shutdown and re-start by itself after adding 1 GB ram and up-grading the graphic card. Then refused to boot. I restored the window ghost but failed to boot. I tried to install new window but installation failed after coping the window files. tried to install old vista lonhorn. It inspected found errors, fixed them but ultimatly failed to be installed. Once again restored the ghost through acronis but failed to boot. At the end attached as slave with another pc but it was not visible. Even acronis could not see it or its partitions. Only bios can see it. It seems that no file system is available on the drive. My data on drive is very important. Please help me how to revover my data. Drive brand is Samsung, cap is 160 GB and file system was NTFS.

  Read the article

• sata hard drive failed

  - by M. Shehryar

  Dear friend, initially my dual core PC started shutdown and re-start by itself after adding 1 GB ram and up-grading the graphic card. Then refused to boot. I restored the window ghost but failed to boot. I tried to install new window but installation failed after coping the window files. tried to install old vista lonhorn. It inspected found errors, fixed them but ultimatly failed to be installed. Once again restored the ghost through acronis but failed to boot. At the end attached as slave with another pc but it was not visible. Even acronis could not see it or its partitions. Only bios can see it. It seems that no file system is available on the drive. My data on drive is very important. Please help me how to revover my data. Drive brand is Samsung, cap is 160 GB and file system was NTFS.

  Read the article

• asterisk extensions.conf & sip.conf

  - by Josh

  I'm trying to get my Dialplan to work. When I call, the only thing I get is a dial tone to enter extension "no Background(thanks-calling) is played". When extension 123 is dialed, busy signal is triggered and asterisk CLI get frozen. Any help will be appreciate it. Conf files below. ; PSTN on sip.conf [pstn] type=friend host=dynamic context=pstn username=pstn secret=password nat=yes canreinvite=no dtmfmode=rfc2833 qualify=yes insecure=port,invite disallow=all allow=ulaw ; PSTN on extensions.conf [pstn] exten => s,1,Answer exten => s,2,Wait,2 exten => s,4,DigitTimeout,5 exten => s,5,ResponseTimeout,10 exten => s,6,Background(thanks-calling) exten => 0,1,Goto(incoming,123,1) ; (Member Services) [incoming] exten => 123,1,NoOP(${CALLERID}) ; show the caller ID info in the console exten => 123,n,Ringing() exten => 123,n,Answer() exten => 123,n,Playback(silence/1) exten => 123,n,Playback(connecting1) exten => 123,n,Wait(3) exten => 123,n,Dial(SIP/line1,60) exten => 123,n,Congestion

  Read the article

• Multiple static WAN IP addresses to single LAN subnet

  - by Jessy Houle

  Below is my home network topology. I currently have 5 static IP addresses, 3 of which are in use by 3 routers. These routers in-turn subnet internal networks and port forward. I use my SSL VPN appliance to remote home from work or on the road. At this point I can remotely administer my Windows Server. I know the network is setup wrong, I was matching existing hardware the best I knew how. http://storage.jessyhoule.com.s3.amazonaws.com/network_topology.jpg Ok this said, here is the problem... One of my websites on my Windows Server now needs to be secure (SSL using port 443). However, I'm already port forwarding port 443 to my VPN appliance. Furthermore, if I'm going to have to reconfigure the network, I would really like to be able to use the SSL VPN to remotely administer all machines. I mentioned this to a friend of mine, who said that what I was looking for was a firewall. Explaining that a firewall would take in multiple static (WAN) IP addresses, and still allow all internal devices to be on the same network. So, basically, I could supply my SSL VPN appliance it's very own static (WAN) IP address routing, and yet have it on the same internal network (192.168.1.x) as all my other devices. The first question is... Does this sound right? Secondly, would you suggest anything different? And, finally, what is the cheapest way to do this? I am started down the road of downloading/installing untangle and smoothwall to see if they will do the job, hoping they take multiple static (WAN) IP addresses. Thank you in advance for your answers. -Jessy Houle

  Read the article

• Hell and Diplomacy: Notes on Software Integration

  - by ericajanine

  Well, I'm getting cabin fever and short-timer's ADD all at the same time. I haven't been anywhere outside of my greater city area in FOREVER and I'm only days away from my vacation. I have brainlock because the last few days have been non-stop diffusing amazingly hostile conversations. I think I'll write about that. So then, I "do" software. At the end of the day, software is pretty straightforward. Software is that thing we love and try to make do things not currently in play, in existence. If a process around getting software to do something is broken (like most actually are), then we should acknowledge it and move on. We are professional. We are helpful beyond the normal call of duty. We live and breathe making the lives better for those apps being active in the world. But above all--the shocker: We are SERVICE. In a service frame of mind, all perspectives shift to what is best overall for system stabilization vs. what must be in production to meet business objectives. It doesn't matter how much you like or dislike the creator of said software. It doesn't matter what time you went to bed last night or if your mate appreciates your Death March attitude. Getting a product in and when is an age-old dilemma in a software environment where more than, say, 3 people are involved. We know this. Taking a servant's perspective eliminates the drama surrounding what a group of half-baked developers forgot to tell each other in the 11th hour about their trampling changes before check-in. We, my counterparts in society, get paid to deal with that drama. I get paid to diffuse that drama and make everything integrate as smoothly as possible. At the end of the day, attacking someone over a minor detail not only makes things worse, it's against the whole point of our real existence. Being in support or software integration means you are to keep your eyes on the end game. That end game? It's making a solution work for all stakeholders, not just you or your immediate superior. Development and technology groups exist because business groups need them to exist and solve their issues. The end game? Doing what is best for those business groups ultimately. Period. Note: That does not mean you let your business users solely dictate when and if something gets changed in an environment you ultimately own. That's just crazy. Software and its environments are legitimately owned by those who manage it directly, no matter how important a business group believes it is to the existence of mankind. So, you both negotiate the terms of changing that environment and only do so upon that negotiation. Diplomacy is in order. So, to finish my thoughts: If you have no ability to keep your mouth shut in a situation where a business or development group truly need your help to make something work even beyond a deadline, find another profession. Beating up someone verbally because they screw up means a service attitude is not at the forefront of your motivation for doing what is ultimately their work and their product. Software, especially integration, requires a strong will and a soft touch to keep it on track. Not a hammer covered in broken glass.

  Read the article

• Why can't I renew my dynamic IP address?

  - by qwerty

  So, I'm going to explain this from the start. I've started a project with a friend of mine which includes a webspider, that crawls through all pages on a site and stores them in a DB. Since I've never done this before, I didn't think about the amount of requests I was actually sending to the site, and after a day or two I finally got my IP blocked. I need to be able to visit that site as it's very important to me. Not only for my project, but for other reasons too. (and if I'm able to renew my IP I'm going to set a delay on the crawler so I don't get blocked & DDOS the site) I have a dynamic IP address, at least that's what my router settings say. I've tried ipconfig /flushdns, ipconfig /release, restart computer. No result. I end up with the same IP address. I've also tried renewing it from the router, however, I think it uses the same method which isn't working. Is it possible that site has blocked my mac address? Can a site even access my mac address?

  Read the article

• Missing BootMgr in Vista

  - by Selase

  Am in really deep trouble here and would use every advice available from everyone out there.. Am message just pooped on my screen and i had to restart my laptop. upon restarting the BootMgr got corrupted. Am running Windows Vista 32 bit by the way.. i got onto Google with a friend's PC and found two basic ways of fixing it. the first one that requires windows to automatically fix it using Startup repair ends up with the error message : "Startup REpair cannot repair this computer automatically" the second option that requires me to rebuild the BCD scans my system and finds the operating system on drive D:\Windows which i believe should be C:. if i hit Y(yes) for the rebuild process to take place i get the message "The required system device cannot be found" i then try the second option which requires me to recreate the BCD Store ends up with an error message that says "The store export operation has failed. The requested system device cannot be found". proceeding from there is meaningless since the system device cannot be found. I somehow believe the device cannot be found because its identifying the windows installation on D: instead of C: but how to change that i have no idea... I dot know how it happens to identify an O/S on D: when there's none there... How do i go about fixing the BootMgr? I have very important files on my system and cant afford to reinstall windows... i really need to fix this..Please help...

  Read the article

< Previous Page | 99 100 101 102 103 104 105 106 107 108 109 110  | Next Page >