Search Results

Search found 3678 results on 148 pages for 'weird'.

Page 103/148 | < Previous Page | 99 100 101 102 103 104 105 106 107 108 109 110  | Next Page >

• Grub hangs at "Starting up ..." when USB flash card reader is plugged in (on Ubuntu Hardy)

  - by Laurence Gonsalves

  I have a PC with Ubuntu Hardy installed. The machine boots fine unless my USB flash card reader (one of those N-in-1 readers by MediaGear) is plugged in at startup. If the reader is plugged in, the boot process proceeds as normal until it gets to the screen that says "Starting up ...". At that point it just hangs forever. To work around this I currently leave the reader unplugged when booting, and then plug it back in after I see that Ubuntu is actually starting. This is annoying though, especially when I reboot the machine (typically for updates), forget to unplug the reader, and walk away only to come back hours later to find the machine hung. My guess is that the presence of the reader is confusing Grub about where to find the kernel. The weird thing is that Grub is on the same drive as the kernel I want it to boot so clearly the drive is still readable even when the flash card reader is plugged in. Is there some way I can tell Grub to never go looking on the flash card reader?

  Read the article

• Setting MSN or Yahoo! Messenger status to Invisible or Offline when idle for an hour

  - by Jian Lin

  Where, or how, do I set it up in MSN Messenger or Yahoo! Messenger to automatically switch my status to either "Invisible" or "Offline" when idle for a half hour, or an hour? I know how to set my status as "Away" or "Busy" after 10 minutes, but can't seem to find a way to set the offline status options without manual intervention. Back story As a software developer, I am very used to turning the computer on for the whole day and not turning it back off. (For example, checking email for urgent fixes, fix issue and push to web server). It's not even turned off when heading to sleep in case I might find it hard to fall asleep and come back to check on the computer. Or to have it there ready in the morning to check that everything is okay. If I'm seen as being online for 24 hours of a day, some people see me as weird. Their perception of my value decreases as I'm always there (hard to get = high value; always there = low value). Leaving it on makes everyone in my contacts list think I have nothing better to do all day than sit in front of the computer. Even though it's my job and I do admittedly spend more time online than other people. That's why I'd like to find a way to set my status as Invisible or Offline.

  Read the article

• Windows EFS file sharing anomaly

  - by wbkang

  Fyi, I can confirm this happening in Windows Vista (Business) and Windows 7 Professional in WORKGROUP mode (as both a client and a server). I am not totally sure if this is a Superuser question or a ServerFault question. So there are two PCs, let's call them C (client) and S (server). Both servers have a user called U with the same password. Both C and S has the same private/public key pair for EFS. S shares a folder F with U given full permission. Also locally, the user U has the full permission on F. Now, U, from C, connects to F at the server S, everything works totally fine. I can read,write, delete files and create/delete folders in S. Things go weird from here. I encrypt the folder F in S. I can delete/modify files fine (so the files in F decrypted OK). However, U from C, cannot create a folder, or create a file getting Access Denied. But this Access Denied is very special. It takes over 10 seconds at C to receive the error and the explorer freezes while trying to create a folder, eventually returning error. In S, I can watch the folder created at the same time, and what I see is "New Folder" blinking like crazy and eventually disappearing when the client receives the error. i.e. it's created and deleted in a really rapid manner. What I do not understand is that permissions look fine, I can modify/delete files, and it looks like there is no problem with EFS because I can read/write files fine. Yet it fails to create a file or a folder. Any help is appreciated. Thanks, wbkang

  Read the article

• SQL Server Database In Single User Mode after Failover

  - by jlichauc

  Here is a weird situation we experienced with a SQL Server 2008 Database Mirroring Failover. We have a pair of mirrored databases running in high-availability mode and both the principal and mirror showed as synchronized. As part of some maintenance I triggered a manual failover of the principal to the mirror. However after the failover the principal was now in single-user mode instead of the expected "Principal/Synchronized" state we usually get. The database had been in multi-user mode on the previous principal before this had happened. We ended up stopping all applications, restarting the SQL Server instances, and executing "ALTER DATABASE ... SET MULTI_USER" to bring the database back to the expected "Principal/Synchronized" state in a multi-user mode. Question. Does anyone know where SQL Server stores information about whether a database should be in single-user mode or not? I'm wondering if there is some system database or table that has this setting recorded somewhere. In particular we had an incident once with the database on the original principal (the one I was failing over to) where when trying to detach the database it was put into single-user mode. I'm wondering if that setting is cached somewhere and is the reason that SQL Server put it back into single-user mode after a failover.

  Read the article

• Registry remotley hacked win 7 need help tracking the perp

  - by user577229

  I was writing some .VBS code at thhe office that would allow certain file extensions to be downloaded without a warning dialog on a w7x32 system. The system I was writing this on is in a lab on a segmented subnet. All web access is via a proxy server. The only means of accessing my machine is via the internet or from within the labs MSFT AD domain. While writing and testing my code I found a message of sorts. Upon refresing the registry to verify my code changed a dword, instead the message HELLO was written and visible in regedit where the dword value wass called for. I took a screen shot and proceeded to edit my code. This same weird behavior occurred last time I was writing registry code except on another internal server. I understand that remote registry access exists for windows systems. I will block this immediately once I return to the office. What I want to know is, can I trace who made this connection? How would I do this? I suspect the cause of this is the cause of other "odd" behaviors I'm experiencing at work such as losing control of my input director master control for over an hour and unchanged code that all of a sudden fails for no logical region. These failures occur at funny times, whenver I'm about to give a demonstration of my test code. I know this sounds crazy however knowledge of the registry component makes this believable. Once the registry can be accessed, the entire system is compromised. Any help or sanity checking is appreciated.

  Read the article

• Why can't I bind to 127.0.0.1 on Mac OS X?

  - by Noah Lavine

  Hello, I'm trying to set up a simple web server on Mac OS X, and I keep getting an error when I run bind. Here's what I'm running (this transcript uses GNU Guile, but just as a convenient interface to posix). (define addr (inet-aton "127.0.0.1")) ; get internal representation of 127.0.0.1 (define sockaddr (make-socket-address AF_INET addr 8080)) ; make a struct sockaddr (define sock (socket PF_INET SOCK_STREAM 0)) ; make a socket (bind sock sockaddr) ; bind the socket to the address That gives me the error In procedure bind: can't assign requested address. So I tried it again allowing any address. (define anyaddr (make-socket-address AF_INET INADDR_ANY 8080)) ; allow any address (bind sock anyaddr) And that works fine. But it's weird, because ifconfig lo0 says lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 inet 127.0.0.1 netmask 0xff000000 So the loopback device is assigned to 127.0.0.1. So my question is, why can't I bind to that address? Thanks. Update: the output of route get 127.0.0.1 is route to: localhost destination: localhost interface: lo0 flags: <UP,HOST,DONE,LOCAL> recvpipe sendpipe ssthresh rtt,msec rttvar hopcount mtu expire 49152 49152 0 0 0 0 16384 0

  Read the article

• Windows 7 fails to connect to the internet a few minutes after startup

  - by SageTheGreat

  Problem Earlier today, when I turned on my desktop computer, my internet connection works fine. Cryptocurrency miners connecting and hashing as usual and I can browse websites. But after a few minutes, my miner fails indicating that there is something wrong with my internet connection. Tried refreshing my browser and is stuck at "resolving host", and then presented me an error. After that, i can't browse sites anymore. But the weird thing is that the network icon in Windows 7 shows no signs of problems. Solutions Made Restarted my computer without doing anything: Problem persists. Tried using the network troubleshooter of windows: Reported no problems Stopped bonjour still no progress. Loaded windows using Last good config: still no progress. Restarted Modem: No change. Current Status I currently did a system restore to my system to a point before installing the latest update from Microsoft. Because earlier today, I installed some updates and after that, the problem started to appear. (After system restore, same problem.) Latest Programs installed before the problem MS Visual Studio 2013 (but internet still worked fine after the install). I hope someone could provide answers on this problem. It is my first time encountering this. EDIT: Additional Info OS: Windows 7 SP1 64-bit AV: Avast Free Antivirus Internet Connection Type: Ethernet It appears that my Laptop can't even connect to the machine thru Remote Desktop My laptop and phone on WiFi works fine and can connect to the internet. EDIT 2: Whenever I boot into Safe Mode, my Internet is fine.

  Read the article

• What could cause random files being downloaded without permission?

  - by Dustin

  I have been having issues lately with a certain directory. It seems someone is placing files into it, or something of that sort, and any attempt to delete them is successful, HOWEVER they reappear over time (maybe not the exact same ones, but random files). I will provide you the information I can and several pictures of my problem: sandbox.mys4l.com/visual/files/b1.jpg Files like this have been appearing in my /visual/ folder, and I have no clue where they are coming from. sandbox.mys4l.com/visual/files/b2.jpg This is what is inside on of those weird files, it appears to be nothing problematic. sandbox.mys4l.com/visual/files/b4.jpg As you can see, in the time it took me to take the first picture, more odd files showed up. These log files are also being uploaded to this directory, and I know I didn't put them there. sandbox.mys4l.com/visual/files/b7.jpg This inside one of these mysterious .log files, I'm not sure what it's all about. These files only appear to be going into this specific area, and I'm not sure of their origin, only that they will not go away. I have done a full system scan at least twice with an up-to-date virus scan, and have looked for an unknown script which may be writing them there. Nothing has come up, so I come to you guys as I hear this is the best place to find answers. Hope this problem has a solution!

  Read the article

• Wireless card on HP laptop not working

  - by D. Strout

  I just bought an HP Envy m6-1125dx online from Best Buy. When I got it home and started it up, the wireless card did not work well - at all. I could connect, but any real usage would cause the connection to start dropping every 30 seconds or so, and it would be really slow. Taking another look at the reviews on the Best Buy site, it seems only a few others had this problem, so I took it to my local Best Buy and exchanged it for another unit. Got it home again and the card had the same issues. Which leads to my dilemma. First: does this model have several different cards that it could come with? Mine is a Ralink RT5390R (on both units I received). If it does, then I can keep exchanging until I get a unit with a different card. I wouldn't ask this, except it seems weird that only a few people mentioned this issue, so I thought that might be one possibility. I looked in to replacing the card with a different one myself, but it seems that HP blocks certain wireless cards. However, some people reported success in replacing the card, and this site said it was only an issue on "older HP computer[s]". Can anyone confirm this? Finally, if that fails/will not work, does anyone know what I can get through Best Buy? I am concerned that they will not put any different card than the Ralink, and after two of those, I don't want that. Can I ask Best Buy support to use a different card? Can they even get another card from HP? I guess the base question is: should I attempt to replace the card myself (two days via Amazon to get a new card), should I try to get the laptop repaired through Best Buy (two - four weeks), should I go for a different model laptop from Best Buy, or should I try a different unit of the same model (three's the charm?).

  Read the article

• APC fragmentation on EC2 Micro for Wordpress + W3TC

  - by Maarten Provo

  I'm trying to optimize APC for my Amazon EC2 Micro server running one Wordpress-site with W3TC. I've started with the settings advised by TechZilla in another topic but I keep getting high fragmentation with 50% of space being free. I've uploaded an image to http://www.maartenprovo.be/downloads/apc.jpg but I can't post it here since I need at least 10 reputation. What values can I optimize to prevent fragmentation? [apc] apc.enabled=1 apc.shm_segments=1 ;32M per WordPress install apc.shm_size=164M ;Leave at 2M or lower. WordPress does't have any file sizes close to 2M apc.max_file_size=2M ;Relative to the number of cached files apc.num_files_hint=1000 ;Relative to the size of WordPress apc.user_entries_hint=4096 ;The number of seconds a cache entry is allowed to idle in a slot before APC dumps the cache apc.ttl=7200 apc.user_ttl=7200 apc.gc_ttl=3600 ;Auto update chache files on change in WP-ADMIN or W3TC apc.stat=1 ;This MUST be 0, WP can have errors otherwise! apc.include_once_override=0 ;Only set to 1 while debugging apc.enable_cli=0 ;Allow 2 seconds after a file is created before it is cached to prevent users from seeing half-written/weird pages apc.file_update_protection=2 ;Ignore files apc.filters apc.slam_defense = 0 apc.write_lock = 1 apc.cache_by_default=1 apc.use_request_time=1 apc.mmap_file_mask=/var/tmp/apc.XXXXXX apc.stat_ctime=0 apc.canonicalize=1 apc.write_lock=1 apc.report_autofilter=0 apc.rfc1867=0 apc.rfc1867_prefix =upload_ apc.rfc1867_name=APC_UPLOAD_PROGRESS apc.rfc1867_freq=0 apc.rfc1867_ttl=3600 apc.lazy_classes=0 apc.lazy_functions=0

  Read the article

• Error related to pkg-config when installing frei0r as part of another package

  - by Anentropic

  I am trying to build https://github.com/mltframework/shotcut on OS X Lion (using their script in scripts/build_shotcut.sh) and after numerous hurdles I'm stuck on this error: ./configure: line 16062: syntax error near unexpected token `OPENCV,' ./configure: line 16062: `PKG_CHECK_MODULES(OPENCV, opencv >= 1.0.0, HAVE_OPENCV=true, true)' ERROR: Unable to configure frei0r From what I already googled this means that the PKG_CHECK_MODULES macro hasn't been defined, which probably means there's something wrong with my pkg-config, which I installed via Homebrew. Sounds like the pkg.m4 file isn't found. When I brew install pkg-config I get the following warning: Warning: m4 macros were installed to "share/aclocal". Homebrew does not append "/usr/local/share/aclocal" to "/usr/share/aclocal/dirlist". If an autoconf script you use requires these m4 macros, you'll need to add this path manually. Well I've appended that line to the dirlist file and it doesn't fix the problem above. Can anyone suggest a way forward here? I have briefly tried building my own pkg-config from source but (bizarrely) when I tried to ./configure I got the following error: checking for pkg-config... no ./configure: line 13540: --exists: command not found configure: error: pkg-config and glib-2.0 not found, please set GLIB_CFLAGS and GLIB_LIBS to the correct values if building pkg-config needs pkg-config it seems like a weird catch 22 situation... I think this is probably an unnecessary sidetrack anyway.

  Read the article

• Android webbrowser returns code 500 for webpage on Nginx webserver

  - by Paxxil

  Hey! I've come to a very weird behavior of a web browser on android mobile phone (I've tried HTC Wildfire and HTC Desire phones). I have a web server with Nginx v0.8.54. When i try to open a web page on the phone it shows me error: The requested item could not be loaded! (Status code: 500) BUT it only happens when I am requesting page through Mobile network. On Wifi it works just fine .... but there is more .... if I stop Nginx and start Apache web server it works just fine on both Mobile network and wifi. I've also tried other mobile network and it is the same behavior. Some server stats: Firewall is OFF Selinux is OFF the web page (using Nginx web server) opens normally on any other browser (IE, FF, Opera, Chrome, Safari) on the laptop or PC Nothing in nginx error.log This is the only entry in access.log when the page is requested: xxx.xxx.xxx.xxx - - [17/Mar/2011:11:19:49 -0500] 200 "GET / HTTP/1.1" 27405 "-" "Mozilla/5.0 (Linux; U; Android 2.2; en-gb; Desire_A8181 Build/FRF91) AppleWebKit/533.1 (KHTML, like Gecko) Version/4.0 Mobile Safari/533.1" "-" index.html has only "Hello World" string in it. There is no fishy javascript or anything else. .... but there is even more.... if i open the same page on another server, with the same Nginx build, with the same server and web server configuration.... it opens just fine. if anyone has any idea on what may be going on, i would really appreciate it if you let me know. Thanks! EDIT: i forgot to mention that page opens OK on Iphone and Nokia

  Read the article

• Can't find PC on network

  - by Simon Verbeke

  I just got myself a new laptop, and set it up. It is connected to the wireless internet in my home. I then wanted to create a homegroup between the laptop and my desktop, but they can't find each other. Probably because the desktop has a wired connection to the router and the laptop is connected to a wireless access point. The router and the AP are connected to a switch in the middle by cable. A sketch of the network: Laptop - - - Wireless Access Point ----- Switch ----- Router ----- Desktop ^ ^ ^ ^ Wireless Wired Wired Wired They both point to the same gateway and DHCP-server (on 192.168.0.1). And I can ping to that address from both PCs. When I try to ping either of the PCs the pings time out. The subnets are also the same (255.255.255.0) and the IPs are in the same range (192.168.0.114 laptop, 192.168.0.205 desktop). So I don't really understand what I need to do to be able to access either computer from the other. The weird thing is that Synergy (to use mouse and keyboard over the network) works, just by using the IPs assigned to both PCs. The acces point is a linksys WAP54g, but I'm unsure of the Router, it has a custom casing from our ISP and hides any clues for identifying the product. I'm going to google a bit so I can add that info later. Both PC's are Windows 7 64 bit. The desktop is Ultimate, the laptop Professional.

  Read the article

• WordPress permalinks not working, everything seems fine

  - by javipas

  I have a WordPress blog I've migrated from another CMS, and I've being having a lot of problems with my permalinks structure: lots of articles give a 404, although they are there, somewhere, published. The site is www.muycomputerpro.com (MCP for short), and for example an article that should be found is: http://muycomputerpro.com/Actualidad/Especiales/2009-las-grandes-crecen-en-la-bolsa If I do a search on the search tool at MCP, the result is there (see EnlacesMCP-1.jpg) But when I click on the link, our 404 error page appears (see EnlacesMCP-2.jpg) The weird thing is, the article is published, and the permalink is the right one, as you can see on this screenshot of the WordPress CMS: The permalink (below the title) is correct (http://www.muycomputerpro.com/Actualidad/Especiales/2009-las-grandes-crecen-en-la-bolsa/) but it does not work. In fact, if I try to use the short link (http://www.muycomputerpro.com/?p=5023) the article does not show either. I've accessed my WordPress DB and I've search the article to see if there is something wrong there, but from what I can tell all the fields are OK, here's a screenshot: I really don't know what is causing this. The permalink structure should work (I'm using the "Custom permalink" plugin to preserve the old URLs that had a alphanumeric code at the end of the postname) and the permalink config on wordpress is "/%postname%/". I really need help :(

  Read the article

• why altgr+p doesn't work, AUTOHOTKEY

  - by voodoomsr

  Hi guys, i try and i try to find the bug in this script but i can't . Maybe some of you can give me a hint... Problem. When i press altgr&p it suppose that the Delete key is triggered, but the weird thing is that after one succesfull delete, if i continue pressing altgr&p appears the p, and the delete isn't triggered anymore. in the meantime i test other solution move to the right and then delete with the backspace, that works, but when i have text selected this alternative isn't good.... here is the code #InstallKeybdHook ;characters very used RAlt & e:: SendInput []{Left} Return RAlt & w:: SendInput <>{Left} Return RAlt & d:: SendInput (){Left} Return RAlt & s:: SendRaw {} SendInput {Left} Return RAlt & x:: SendInput ""{Left} Return RAlt & c:: SendInput ''{Left} Return RAlt & f:: SendInput * Return RAlt & r:: SendRaw + Return RAlt & v:: SendInput - Return ;comienzo y fin de linea RAlt & a:: SendInput {Home} Return RAlt & z:: SendInput {End} Return ;movimientos InEditon /* RAlt & p:: SendInput {Right}{BackSpace} Return */ <^>!p:: Send {Del} Return RAlt & o:: SendInput {Up} Return RAlt & l:: SendInput {Down} Return RAlt & k:: SendInput {Left} Return RAlt & ñ:: SendInput {Right} Return RAlt & ,:: SendInput {Enter} Return RAlt & i:: SendInput {BackSpace} Return ;; clipx ^mbutton:: sendinput ^+{insert} Return ^+k::^+Left +k::+Left ^k::Left +l::+Down ^+l::^+Down ^l::^Down +ñ::+Right ^+ñ::^+Right ^ñ::^Right +o::+Up ^+o::^+Up ^o::^Up +a::+Home ^+a::^+Home +z::+End ^+z::^+End

  Read the article

• Windows 7 BSOD when I walk away from the computer

  - by bobobobo

  I have a really weird experience with this new AM3 box I set up. Everything seems fine at first. But now I get frequent (daily) BSOD's, mostly when I walk away from the computer for more than 5 minutes (when the computer is idle). The BSOD's as shown by BlueScreenView almost always have to do with ntoskrnl.exe, and they'll do with really normal sounding operations, like SYSTEM_SERVICE_EXCEPTION, NTFS_FILE_SYSTEM, DRIVER_IRQL_NOT_LESS_OR_EQUAL, KMODE_EXCEPTION_NOT_HANDLED, BAD_POOL_HEADER - You name it. These are basically them, and they repeat after that, just random order. Its not like one is more consistently the problem than the other. I have Windows update ON and I let it do its updates everytime it wants to. I turned windows indexing service off, but it seems Windows 7 does a lot of background processing when I'm away - I'll come into the room and the fan will be going nuts (I'm pretty sure this isn't because the computer flies into a panic whenever I leave). I tried finding updates for my ASUS, and really there isn't much to install (except some new driver firmware). I'm going to install that to see if it helps, but what else could it be? Is it possible its a hardware issue with the board? Or is every Windows 7 user experiencing daily BSOD these days that I don't know about?

  Read the article

• Suddenly can't send E-Mails with Apple Mail to Gmail SMTP

  - by slhck

  Hi all, I have a weird problem that started just today. I am using Apple Mail on a Leopard machine, connecting to Gmail. Fetching e-mail works just fine. My SMTP settings are also correct. Still, I can't send mail, it will display a pop up saying that "transferring the content to the mail server" failed (translation from German, could be different in English OS X versions). I have verified the following: My SMTP settings are definitely correct. I have not changed them and the issue appeared today. Also, I went through the Apple online configuration for Gmail accounts and did not have to adjust any setting. I can run network diagnosis and it will connect to both POP and SMTP servers without a problem (all green lights) The Telnet details will show me the HELO message from the Gmail servers, so there's no authentication failure. Console.app will not show any messages related to "mail" when I try to send the mail, so there's no specific error message The mail I'm trying to send does not have an attachment, it is plaintext only I can login to gmail.com and send mails without a problem The recipient address exists and contains no syntax errors I can also not send mails to myself When using another IP and ISP (through VPN), it still doesn't work As for my settings: I connect to smtp.gmail.com and for advanced settings I choose password-based authentication with user: [email protected] and my password. I let Apple Mail try the default ports (for SSL and TLS, respectively). Again: I have not changed a thing between yesterday and today. What is causing that strange behavior? Any help would be much appreciated.

  Read the article

• SQL SERVER 2005 with Windows 7 Problems

  - by azamsharp

  First of all I restored the database from other server and now all the stored procedures are named as [azamsharp].[usp_getlatestposts]. I think [azamsharp] is prefixed since it was the user on the original server. Now, on my local machine this does not run. I don't want the [azamsharp] prefix with all the stored procedures. Also, when I right click on the Sproc I cannot even see the properties option. I am running the SQL SERVER 2005 on Windows 7. UPDATE: The weird thing is that if I access the production database from my machine I can see the properties option. So, there is really something wrong with Windows 7 security. UPDATE 2: When I ran the orphan users stored procedure it showed two users "azamsharp" and "dbo1". I fixed the "azamsharp" user but "dbo1" is not getting fixed. When I run the following script: exec sp_change_users_login 'update_one', 'dbo1', 'dbo1' I get the following error: Msg 15291, Level 16, State 1, Procedure sp_change_users_login, Line 131 Terminating this procedure. The Login name 'dbo1' is absent or invalid.

  Read the article

• Bouncing between a 502 and 503 error

  - by Dave

  This has become an increasingly frustrating ordeal. I'm mostly a web developer, so forgive me if I am using improper terminology here. I have a client that had purchased a domain at JustHost. We built him a website and have it on our own server space. Now, I'm mostly used to dealing with godaddy and it is simple enough to manage dns records and point the A record to our server IP, where Apache on our end deals with the domains via name-based virtual hosts. But for some reason, in setting this up with JustHost, when attempting to go to the domain name, I either get a 502 or 503 error or "webpage does not exist". Now, I know that the basic functionality of the webpage must be working because I can access the the index etc straight through my servers www data (IE [server-ip]/website_folder). I was on the phone with technical support for over three hours yesterday with justhost and the best I could get was "That's really weird..." I've checked my logs and there doesn't seem to be anything coming through to my end. Does anybody have an idea of whats going on here? I would love for it to be a problem on my end, because justhost doesn't seem capable of helping further. Any help is greatly appreciated, thanks. I forgot to mention that we have several other sites up and running and completely accessible.

  Read the article

• Ubuntu 12.04/12.10 can't detect windows or any other partitions(Asus z77 UEFI BIOS)

  - by user971155

  I've recently completed tinkering my new pc(motherboard ASUS z77 with UEFI BIOS) and unfortunately not everything works quite well. After installing windows 7 ultimate on a single primary partition(SATA drive) I decided to allocate one more logical partition for additional needs. When I tried doing it with the manager - it said that it couldn't allocate requested size even though I certainly asked for much less than it was available. I thought that it might have been a windows issue and proceded to installing Ubuntu 12.10 x64. When the graphical interface loaded it showed me a message stating that it can't find any other operating system on the drive. When I used custom partioning option it showed me none of my current partions(including that with windows). However, when I boot with "Try Ubuntu" feature it does find them ! I find it weird though. Here's what the console present me with: ubuntu@ubuntu:~$ sudo os-prober /dev/sda1:Windows 7 (loader):Windows:chain ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sda: 640.1 GB, 640135028736 bytes 255 heads, 63 sectors/track, 77825 cylinders, total 1250263728 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00072b98 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 100020223 49906688 7 HPFS/NTFS/exFAT /dev/sda3 100022270 1250263039 575120385 5 Extended /dev/sda4 566669312 1250263039 341796864 83 Linux I also tried creating partitions from disk utility which results in error: , Error creating partition: helper exited with exit code 1: In part_add_partition: device_file=/dev/sda, start=51211402240, size=1923000000, type=0x83 Entering MS-DOS parser (offset=0, size=640135028736) MSDOS_MAGIC found looking at part 0 (offset 1048576, size 104857600, type 0x07) new part entry looking at part 1 (offset 105906176, size 51104448512, type 0x07) new part entry looking at part 2 (offset 51211402240, size 588923274240, type 0x05) Entering MS-DOS extended parser (offset=51211402240, size=588923274240) readfrom = 51211402240 MSDOS_MAGIC found Exiting MS-DOS extended parser looking at part 3 (offset 290134687744, size 349999988736, type 0x83) new part entry Exiting MS-DOS parser MSDOS partition table detected containing partition table scheme = 1 got it Error: Can't have overlapping partitions. ped_disk_new() failed Here's what I get when I try to install the system i.stack.imgur.com/pjlb9.png, i.stack.imgur.com/g1lXN.png P.S. It's strange that I even can't create any more partitions neither with disk-utility nor with windows 7 native tools

  Read the article

• nginx: dump HTTP requests for debugging

  - by Alexander Gladysh

  Ubuntu 10.04.2 nginx 0.7.65 I see some weird HTTP requests coming to my nginx server. To better understand what is going on, I want to dump whole HTTP request data for such queries. (I.e. dump all request headers and body somewhere I can read them.) Can I do this with nginx? Alternatively, is there some HTTP server that allows me to do this out of the box, to which I can proxy these requests by the means of nginx? Update: Note that this box has a bunch of normal traffic, and I would like to avoid capturing all of it on low level (say, with tcpdump) and filtering it out later. I think it would be much easier to filter good traffic first in a rewrite rule (fortunately I can write one quite easily in this case), and then deal with bogus traffic only. And I do not want to channel bogus traffic to another box just to be able to capture it there with tcpdump. Update 2: To give a bit more details, bogus request have parameter named (say) foo in their GET query (the value of the parameter can differ). Good requests are guaranteed not to have this parameter ever. If I can filter by this in tcpdump or ngrep somehow — no problem, I'll use these.

  Read the article

• Windows 7 BSOD when changing power plan

  - by dd5

  i have a strange problem. When i want to change the power plan on my laptop from High performance to Balanced, Windows freezes and i get bsod. The power plan settings are all default. Laptop specs: - Intel Core i3 330M/350M - Intel® HM55 Express Chipset - DDR3 1066 MHz SDRAM 8GB - ATI Mobility™ Radeon HD5730 1GB DDR3 VRAM - Intel SSD330 128gb - Windows 7 Home premium I've searched the internets but couldnt find a similar issue. BSOD first started when i installed this SSD and stopped when i've updated the chipset controller driver then started again yesterday when i wanted to change the power settings plan.Minidump file here. Any help with this weird issue appriciated, thanks. Edit: - i've ran Memory diagnostic tool, - Intel SSD diagnostics - and updated the firmware to 3.2.1. Non of these steps worked or shown signs of errors - but still got BSOD when changing power plan settings. After analizing the dump file via osronline.com here a first few lines: CRITICAL_OBJECT_TERMINATION (f4) A process or thread crucial to system operation has unexpectedly exited or been terminated. Several processes and threads are necessary for the operation of the system; when they are terminated (for any reason), the system can no longer function. Arguments: Arg1: 0000000000000003, Process Arg2: fffffa8008661b30, Terminating object Arg3: fffffa8008661e10, Process image file name Arg4: fffff800033de270, Explanatory message (ascii) -- Solution -- Provided by Vinayak: After installing the Intel Rapid storage Technology from MajorGeeks, i didn't experience a BSOD since, thank you :)

  Read the article

• Can not copy files after installing windows

  - by Ali

  I am experiencing a weird problem. I was running Xubuntu on my laptop until yesterday that I had to delete Xubuntu and install Windows. I had a NTFS partition on my Xubuntu that I kept some files on it. Today after installing windows I wanted to move all the files from that partition to an external HDD. I selected all files and folders and clicked on Copy, then I went to the HDD and clicked on paste but nothing happened. I can not do that. I do not know why. I copy the files, and wherever I click paste, nothing happens. If I try to copy the files and folders one by one, I can copy some of them, but some of them do not move. The other problem I have is that I can not open some files, in particular pdf files. When I click on pdf files I get this error: There was an error opening this document. This file cannot be found. Also, I cannot play some mp4 files. I can not open some jpg and txt files. I get this error The directory name is invalid. So in summary, after removing Xubuntu and installing windows 7 I have the following problems with one of the NTFS partitions on my internal drive: Can not copy or cut all folders and files from that partition to any other partition - I also do not get any errors. Can copy some folders and files Can not access some pdf, jpeg, txt and mp4 files and get the above errors. I should also mention I did not change anything for this partition during the installation or formatting the other partitions.

  Read the article

• New Static Website with Hosted DNS alternating 502, 503 and Page Does Not Exist Errors

  - by Dave

  This has become an increasingly frustrating ordeal. I'm mostly a web developer, so forgive me if I am using improper terminology here. I have a client that had purchased a domain at JustHost. We built him a website and have it on our own server space. Now, I'm mostly used to dealing with godaddy and it is simple enough to manage dns records and point the A record to our server IP, where Apache on our end deals with the domains via name-based virtual hosts. But for some reason, in setting this up with JustHost, when attempting to go to the domain name, I either get a 502 or 503 error or "webpage does not exist". Now, I know that the basic functionality of the webpage must be working because I can access the the index etc straight through my servers www data (IE [server-ip]/website_folder). I was on the phone with technical support for over three hours yesterday with justhost and the best I could get was "That's really weird..." I've checked my logs and there doesn't seem to be anything coming through to my end. Does anybody have an idea of whats going on here? I would love for it to be a problem on my end, because justhost doesn't seem capable of helping further. Any help is greatly appreciated, thanks. I forgot to mention that we have several other sites up and running and completely accessible.

  Read the article

• Google Contacts/Calendars + Address Book + iCal: built-in sync (problems) or Exchange sync?

  - by jtbandes

  (I've looked at a few other questions related to this, but I've only found old questions with people saying that they're having problems, or anticipating Snow Leopard fixing them; no recent updates.) I'm looking to sync my Google Contacts & Calendars, and Gmail, with my Mac & iPhone. The iPhone I have currently set up thus: IMAP for Mail Exchange (Google Sync) for Contacts & Calendars The Mac: Address Book: built-in sync iCal: CalDAV, configured as a Google account I haven't been syncing Gmail to Apple Mail, because I was having weird IMAP glitches every so often that just got to annoying. Will Exchange / Google Sync work for this at all? Any suggestions there? Here are the other problems I'm having. Address Book only syncs certain fields (for example, Birthdays don't sync at all). I believe this is a list of the information that's synced. Address Book's "Synchronize with Google" checkbox doesn't stay checked when I quit Address Book. I think iCal is working fine, for the most part. Any suggestions on how to improve this setup? Why doesn't Address Book / Google Contacts sync stay enabled? Could I use Exchange for it like I am on the iPhone? Will that sync all the fields, including Birthdays, etc.? Thanks in advance!

  Read the article

< Previous Page | 99 100 101 102 103 104 105 106 107 108 109 110  | Next Page >