Search Results

Search found 22893 results on 916 pages for 'client scripting'.

Page 104/916 | < Previous Page | 100 101 102 103 104 105 106 107 108 109 110 111  | Next Page >

• OpenSwan (IPSEC) on Fedora 13 with Snow Leopard as a client

  - by sicn

  I recently installed OpenSwan on my Fedora 13 machine. I want to use it to connect with Mac OS X with L2TP over IPSEC, unfortunately I am already stuck on the IPSEC-negotation part. My server is running behind a NATted firewall so my external IP differs from the server's IP. The server has a fixed IP on the network and the same is almost always valid for the clients (they are usually behind a NATted firewall). I installed OpenSwan on Fedora 13 and have following configuration: config setup protostack=netkey nat_traversal=yes virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12 oe=off nhelpers=0 conn L2TP-PSK-NAT rightsubnet=vhost:%priv also=L2TP-PSK-noNAT conn L2TP-PSK-noNAT authby=secret pfs=no auto=add keyingtries=3 rekey=no ikelifetime=8h keylife=1h type=transport left=my.servers.external.ip leftprotoport=17/1701 right=%any rightprotoport=17/0 IPSEC starts fine and listens to UDP 500 and 4500. These two ports are opened in the firewall and are forwarded fine to the server. In my /etc/ipsec.secrets file I have my.servers.external.ip %any: "LongAndDifficultPassword" And finally in my sysctl.conf (the redirect-entries are there because OpenSwan was strongly protesting about send/accept_redirects being active) I have net.ipv4.ip_forward = 1 net.ipv4.conf.all.send_redirects = 0 net.ipv4.conf.all.accept_redirects = 0 Running "ipsec verify" gives me "all greens" (except Opportunistic Encryption Support, which is DISABLED), however, when trying to connect my Mac gives me following in the logs: Nov 1 19:30:28 macbook pppd[4904]: pppd 2.4.2 (Apple version 412.3) started by user, uid 1011 Nov 1 19:30:28 macbook pppd[4904]: L2TP connecting to server 'my.servers.ip.address' (my.servers.ip.address)... Nov 1 19:30:28 macbook pppd[4904]: IPSec connection started Nov 1 19:30:28 macbook racoon[4905]: Connecting. Nov 1 19:30:28 macbook racoon[4905]: IKE Packet: transmit success. (Initiator, Main-Mode message 1). Nov 1 19:30:31 macbook racoon[4905]: IKE Packet: transmit success. (Phase1 Retransmit). Nov 1 19:30:38: --- last message repeated 2 times --- Nov 1 19:30:38 macbook pppd[4904]: IPSec connection failed Any ideas at all?

  Read the article

• Getting NFS clients to retry mount if NFS server down when client boots

  - by z0mbix

  I have an NFS server that several clients mount. I am using the following in my /etc/exports on the server: /content *(rw,no_root_squash) and on the clients in my /etc/fstab I have: content.prd.domain.tld:/content /content nfs rw,hard,intr 0 0 If the clients boot while the NFS server is down, the share does not get mounted. I read in the NFS man page that the retry defaults should handle this: retry=n The number of minutes to retry an NFS mount operation in the foreground or background before giving up. The default value for forground mounts is 2 minutes. The default value for background mounts is 10000 minutes, which is roughly one week. I have tested this, but it doesn't appear to work. Am I missing something? All servers are RHEL 5.4. Cheers z0mbix

  Read the article

• Some clients cannot connect to Server 2008 R2 VPN

  - by Robl

  Hi all, Have a server 2008 r2 setup as a VPN server. We have created a windows group to control access to the VPN called vpn-users. Clients are all Windows 7 Pro. This all seems to work fine except some users cannot connect to the VPN! For example I try to logon to the VPN from a client and get an error saying the server refused the connect due to a policy in place. Specifically authentication type! Fine I think. So i drop that user into the vpn-users group created for this and try again and hey presto the user can now logon! Great. Now try this with another user. But this time I get the same error even though I have dropped them into the vpn-users group!! So does anyone have any idea why this works for some users and not for others?? I have tried moving the user from certain OU's in AD to others, copying the account, taking the user out of the vpn-users group and then back in but get the same error each time. Any thoughts anyone?

  Read the article

• allow client using webpage to run and use 1 server side executable

  - by richardboon

  In simplest term here’s what I must do: When user connects to a webpage (port 80) via their browser, the web server will run a customized-proprietary third party windows executable [located on the server]; then display and allow the user full control to that program (inside the browser). Note: I cannot rewrite/redistribute that 3rd party desktop gui program.

  Read the article

• Sharing hp Deskjet F380 using cups via http driver issues with xp client

  - by ageis23

  Hi the problem is xp doesn't have built in drivers for my printer but vista does. On vista it works perfectly without any issues. However when I try using xp, it insists that I select a driver from the selection xp offers by default. The drivers I've downloaded from HP don't support networking. Hp have stated they're non networkable. Is there anything I can do about this? Any help is greatly appreciated and would save me getting ear ache!

  Read the article

• Cannot access domain from windows 2003 client

  - by Peuge

  Hey all, First off I am a novice at AD and DNS so please bear with me. This is my current situation: I have one server which is a DC and DNS server (win2k3) - Machine 1. I have another machine which is trying to join this domain - Machine2. This machine is also a win2k3 server. This is what I have done so far: I have setup DNS on the DC and its tcp/ip dns is pointing to itself. On machine2 I have set its dns to point to the dc. The DNS has been setup with a forward lookup zone with the same name as the domain (accdirect.com). I can ping machine1 from the machine2 by its FQDN and ip. I have set up forwarders on the DC for our ISP dns and can browse the internet on both machines. In the DNS mmc on the DC I can see a host (A) has been created for machine2. The problem is I still cannot join the domain. When I try join the domain via my computer - properties then it brings up the username/password box and after I go "ok" it says cannot find domain accdirect.com If I run this from machine2 dcdiag /s:accdirect.com /u:accdirect.com\admin /p: then I get the following: Performing initial setup: ** Warning: could not confirm the identity of this server in the directory versus the names returned by DNS servers. If there are problems accessing this directory server then you may need to check that this server is correctly registered with DNS [accdirect.com] Directory Binding Error 1722: Win32 Error 1722 This may limit some of the tests that can be performed. Done gathering initial info. On the dc all dcdiag and netdiag results pass. If anyone could help me I would really appreciate this! Sorry if any of my terminology is a bit off, I have only been doing this for two days. thanks Peuge

  Read the article

• NFS denies mount, even though the client is listed in exports

  - by ajdecon

  We have a couple of servers (part of an HPC cluster) in which we're currently seeing some NFS behavior which is not making sense to me. node1 exports its /lscratch directory via NFS to node2, mounted at /scratch/node1. node2 also exports its own lscratch, which is correspondingly mounted at /scratch/node2 on node1. Unfortunately, whenever I attempt to mount either NFS export on the opposite node, I get the following error: mount: node1:/lscratch failed, reason given by server: Permission denied This despite the fact that I have included first the IP range (10.6.0.0) and then the specific IPs (10.6.7.1, 10.6.7.2) in /etc/exports. Any suggestions? Edit to remove ambiguity: I've made sure that exports only contains either the range, or the specific IPs, not both at the same time.

  Read the article

• Puppet permissions issue reported on client

  - by Jon Skarpeteig

  err: /File[/var/lib/puppet/lib]: Failed to generate additional resources using 'eval_generate': Error 400 on SERVER: Not authorized to call search on /file_metadata/plugins with {:ignore=>[".svn", "CVS", ".git"], :recurse=>true, :checksum_type=>"md5", :links=>"manage"} err: /File[/var/lib/puppet/lib]: Could not evaluate: Error 400 on SERVER: Not authorized to call find on /file_metadata/plugins Could not retrieve file metadata for puppet://example.com/plugins: Error 400 on SERVER: Not authorized to call find on /file_metadata/plugins What exactly causes this error, and how to fix it?

  Read the article

• Getting NFS clients to retry mount if NFS server down when client boots

  - by z0mbix

  I have an NFS server that several clients mount. I am using the following in my /etc/exports on the server: /content *(rw,no_root_squash) and on the clients in my /etc/fstab I have: content.prd.domain.tld:/content /content nfs rw,hard,intr 0 0 If the clients boot while the NFS server is down, the share does not get mounted. I read in the NFS man page that the retry defaults should handle this: retry=n The number of minutes to retry an NFS mount operation in the foreground or background before giving up. The default value for forground mounts is 2 minutes. The default value for background mounts is 10000 minutes, which is roughly one week. I have tested this, but it doesn't appear to work. Am I missing something? All servers are RHEL 5.4. Cheers z0mbix

  Read the article

• Migrate IMAP account between providers - client access only

  - by Pekka

  I have an IMAP E-Mail account with my old provider. I have a new, empty IMAP account with the new provider. Is there a tool or Thunderbird to migrate the E-Mail data from one account to another? I'm a bit wary about just doing a drag & drop in Thunderbird because it's quite a lot of data, and I have a deep distrust against how Thunderbird deals with IMAP data.

  Read the article

• nxclient crashes when trying to open a terminal from a remote client through "ssh -Y"

  - by user167328

  I support around 150 linux machines. I have 2 virtual machines on an ESXi server which I access via nxmachine v3 from a windows 7 box. These machines run CentOS5 with KDE and Lubuntu12.04.1 and they are the admin GUIs from which I support the 150 machines. The linux machines which I manage are redhat4/5, CentOS5 and ubuntu 10 and 12. Normally I contact the machines via ssh -Y. Today I did an ssh -Y to a remote machine which is running Ubuntu 12.10 and ssh 6.0p1. Then I tried to open an lxterminal on the remote machine which should display on my KDE desktop. This immediately and reproducably crashed my nxclient session. I tried again from my lubuntu system with the same effect. I have not observed the phenomenon from other machines yet. The message log on my KDE host shows: Unexpected termination of nxagent because of signal: 11 Logger::log nxnode 3920 Googling for this revealed no usable answer. Does anybody have a clue what is going on here or can give a hint how to solve the issue? Add On: I asked the user at the remote machine to export his DISPLAY to my host and open an lxterminal. This worked without problems i. e. the nxclient did not crash. Then the user tried to send me xeyes and this also killed the nxclient with the same error message found in the message log as above. This makes me suspect that the problem is not solely connected to ssh but maybe to some library stuff.

  Read the article

• Managing multiple IMAP accounts in Thunderbird

  - by baritoneuk

  I've been using Thunderbird for years without issues with 20+ pop3 accounts. I'm moving over to imap which will enable me to keep copies of the emails locally and on the server whilst keeping everthing synchronised. However I'm looking for the best way to manage multiple imap accounts on Thunderbird. Currently I have a filter that copies all the emails into a central inbox and into seperate local folders. The reason for this is I go through my inbox daily and delete all emails that don't require any action. I move any emails that require action to my "action" imap account folder. This way I can syncronise all the emails that require action across multiple computers (and mobile devices). This technique is my implemantion of the GTD or Getting things Done philosophy. I also copy over each email into seperate local folders. The reason I do this is just in case any emails on the imap accounts get deleted, or something drastic happens on the server which means I lose all the emails. My business partner has access to some of these emails and still uses pop3 (with "leave copy on server" checked), but I know sometimes Thunderbird can still delete emails off the server sometimes. The problem with the above is that thunderbird gives me the dreaded error dialogue saying that the emails cannot be filtered due to another process. I find the folder list in Thunderbird hard to manage. Here is a screenshot of part of my folder list- as you can see it's a bit of a complicated list and not easy to manage: What would be the best way of me managing multiple imap accounts whilst allowing me to have copies put in a central folder and emails in local folders? It would be useful if people think this is necessary, as perhaps there is a betterway? How do people manage multiple imap accounts in a way that allows them to keep on top of actionable emails? I'd be interested in how others manage this. I've never used the Thunderbird-based client "Postbox", does this handle multiple imaps better?

  Read the article

• Need to setup a RADIUS server to authenticate a Windows client to a Windows server

  - by drosenblatt

  I have a server that I have technicians who need to be able to access using shared credentials. However, doing that violates our security policy (!). I need each user to be able to authenticate using their own credentials, but the server in question has to be logged in with a certain login (these two requirements are clearly diametrically opposed). I thought that this would be a great application for a RADIUS server. I know how to setup RADIUS to go from Windows -- Cisco, but I have no idea how to use RADIUS to authenticate Windows -- Windows. Can this be done? If so, how?

  Read the article

• How to setup terminal service gateway in my RDP client

  - by Stan

  I am using "RD Tabs" to bypass the terminal service gateway to RDP to the remote host. Usually I use browser and go to https://webvpn.company.com:777 with my account. Now in RD Tabs advanced settings, it's asking server name and authentication method. How should I fill this information? I tried below: server: webvpn.company.com:777 authentication: Attempt TLS But it's not working, what could be wrong? Thanks.

  Read the article

• when should be choose simple php mail and when smpt with loggin+password?

  - by user43353

  Hi, My Case: web application that need to send 1,000 messages per day to main gmail account. (Only need to send email, not need receive emails - email client) 1. option - use php mail function + sendmail + config php.ini php example: <?php $to = '[email protected]'; $subject = 'the subject'; $message = 'hello'; $headers = 'From: [email protected]' . "\r\n" . 'Reply-To: [email protected]' . "\r\n" . 'X-Mailer: PHP/' . phpversion(); mail($to, $subject, $message, $headers); ?> php.ini config (ubuntu): sendmail_path = /usr/sbin/sendmail -t -i pros:don't need email account, easy to setup cons:? 2. option - use Zend_Mail + transport on smpt+ password auto php example(need include Zend_Mail classes): $config = array('auth' => 'login', 'username' => 'myusername', 'password' => 'password'); $transport = new Zend_Mail_Transport_Smtp('mail.server.com', $config); $mail = new Zend_Mail(); $mail->setBodyText('This is the text of the mail.'); $mail->setFrom('[email protected]', 'Some Sender'); $mail->addTo('[email protected]', 'Some Recipient'); $mail->setSubject('TestSubject'); $mail->send($transport); pros:? cons:? Questions: Can 1 option be filtered by gmail email server as spam? please can you add pros + cons to options above Thanks

  Read the article

• How to set Firefox and Thunderbird as default browser and mail client through script

  - by FerranB

  Which are the registry settings to set Firefox an Thunderbird as defaults? It can be done with any script or little program or firefox/thunderbird command line? The target is do it for all the users on a computer not just the current.

  Read the article

• How to find my VPN client IP in windows

  - by cateof

  When I run ipconfig and I get the following: C:\Documents and Settings\grmsrh14>ipconfig Windows IP Configuration Ethernet adapter Wireless Network Connection: Media State . . . . . . . . . . . : Media disconnected Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 112.25.2.222 Subnet Mask . . . . . . . . . . . : 255.255.254.0 Default Gateway . . . . . . . . . : 112.25.2.1 DHCP Class ID . . . . . . . . . . : rise Ethernet adapter Local Area Connection 2: Media State . . . . . . . . . . . : Media disconnected PPP adapter my_lab: Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 10.2.251.41 Subnet Mask . . . . . . . . . . . : 255.255.255.255 Default Gateway . . . . . . . . . : Is there a command that prints only the my_lab(VPN) IP address, ie 10.2.251.41?

  Read the article

• issue using Postfix as authen SMTP client relay to Exchange 2010

  - by Gk

  Hi, I'm using postfix to relay mail to Exchange 2010. Here is my config: relayhost = [smtp.exchange.2010] smtp_sasl_auth_enable = yes smtp_sasl_password_maps = hash:/etc/postfix/relay_passwd smtp_sasl_security_options = #smtp_sasl_mechanism_filter = ntlm (/etc/postfix/relay_passwd contains login information of some accounts on Exchange) With this configuration I can relay email to Exchange. The problem is: the message send from Postfix has header: X-MS-Exchange-Organization-AuthAs: Anonymous and the message is treated like unAuthenicated message on Exchange system (i.e when sending to distribution group require senders are authenicated, I received error: #550 5.7.1 RESOLVER.RST.AuthRequired; authentication required ##rfc822;[email protected]). I using Outlook with the same account as in Postfix and it can send without problem. The different I realized between two case is: Outlook send with NTLM auth mech, Postfix using LOGIN mech. Any idea?

  Read the article

• SQL Server 2000 Client won't connect

  - by alimack

  One day instead of connecting to the database my SQL Server Management gave me the following error: "Data Source name not found & no default driver found" Note it had been working for several years before this, all that had changed was an upgrade to Office (97 -2000) and the monthly Windows patches. I tried rebooting, re-installing both the SQL Server 2000 and 2005 clients on the machine but no joy. I can access the database(s) from other machines.

  Read the article

• rpd over https using a linux client

  - by Nils

  My employer switched from vpn and rdp to using what our admin calls "rdp over https". Since that switch I find myself unable to connect to the "new" rdp server. I think the progress is as follows: A rdp gateway-server is connected via tls the requested sever (different from the gateway-server) is then connected through the tls connection. In windows mstsc-settings the server name is the "internal network name" of the machine I wish to connect. And on the last tab (in German it is called "leistung" - could be activity) I go to the "connection from everywhere" settings and set the gateway-server under gateway-server. Now: Is there any way to use this scenario under linux (apart from a virtual machine running Windows)? I am interested in free ideas (e.g. is it possible to create a tls tunnel and connect through that using freerdp/rdesktop?) non-free ideas. As long as they work I'll worry about the costs later. Free ideas would be better :-)

  Read the article

• How to troubleshoot intermittent and irregular connection errors on home network (preferrably Mac client)

  - by Martin

  Hi, I'm experiencing intermittent connection errors in our home network from two different computers, normally "Connection Reset" when browsing, but also other issues such as very slow throughput. I have approximately a network setup as below: ISP-Cable Modem-Dlink DIR 655 Router-(Ethernet)-Fon Router-Mac/Windows laptop Basically, is there a simple way to monitor the network and detect where issues are coming from? Right now we don't know if it is the Fon router, the Dlink router, the modem or the ISP. As the issue is intermittent, is there a software that regularly traceroutes a set of destinations and tests e.g. throughput, something that can help us figure out where in the chain the errors are introduced? The more automatic network monitor, the better.

  Read the article

• Recommend an SFTP solution for Windows (Server & Client) that integrates well with Dreamweaver

  - by aaandre

  Could you please recommend a secure FTP solution for updating files on a remote windows server from windows workstations? We would like to replace the FTP-based workflow with a secure FTP one. Windows Server 2003 on the remotely hosted webserver, WinXP on the workstations. We manage the files via Dreamweaver's built-in FTP. My understanding is Dreamweaver supports sFTP out of the box so I guess I am looking for a good sFTP server for Windows Server 2003. Ideally, that would not require cygwin. Ideally, the solution would use authentication based on the existing windows accounts and permissions. Thank you!

  Read the article

• Nobody nogroup on ubuntu client with Solaris server

  - by user1574623

  I have an openIdiana server with ZFS and it has been shared with NFS on a ubuntu server (called server1) one year ago. Now i am asked to shared it on a second ubuntu server (called server2). So i have took the line in /etc/fstab from server 1 and add it in server2: 192.168.1.22:mypool/data/.zfs/snapshot /mnt/zfs nfs acl,intr,noatime 0 0 But when i mount it, the rights on server2 are "nobody nogroup" (connect as anonymous?!) whereas its ok on server1. And on my OpenIndiana, I haven't found where it is configured (its not me who configured it last year). So I have tried to set zfs set sharenfs=rw numpool/data but without success. So i am looking for a file like /etc/exports on Ubuntu to configure which server is allowed to connect, and not as anonymous. Any idea? thanks,

  Read the article

• Create MAPI profile for exchange 2007 without MAPI client

  - by despart

  Hi, I have a windows server 2003 where I have to create a MAPI profile to read incoming emails of exchange 2007, using a custom utility. I googled a lot and seems that there was a way to do it with newprof.exe utility but it is no longer available. I don't have an outlook license so I need a free way to create MAPI profiles in this server. Thanks. David.

  Read the article

• samba joined to AD canot see users when in the security tab on client

  - by Jonathan

  I've got samba joined via kerberos and winbindd to our AD network and user authentication and everything else is working great. However when I try to add users/groups to file permissions it tells me they are not found. All the users groups show up fine with getent so I'm not sure why they are not showing up. Here is my smb.conf and I would much appreciate any help with this. #GLOBAL PARAMETERS [global] socket options = TCP_NODELAY IPTOS_LOWDELAY SO_KEEPALIVE SO_RCVBUF=11264 SO_SNDBUF=11264 workgroup = [hidden] realm = [hidden] preferred master = no server string = xerxes web/file server security = ADS encrypt passwords = yes log level = 3 log file = /var/log/samba/%m max log size = 50 printcap name = cups printing = cups winbind enum users = Yes winbind enum groups = Yes winbind use default domain = Yes winbind nested groups = Yes winbind separator = + winbind refresh tickets = yes idmap uid = 1600-20000 idmap gid = 1600-20000 template primary group = "Domain Users" template shell = /bin/bash kerberos method = system keytab nt acl support = yes [homes] comment = Home Direcotries valid users = %S read only = No browseable = No create mask = 0770 directory mask = 0770 force create mode = 0660 force directory mode = 2770 inherit owner = no [test] comment = Test path=/mnt/test writeable=yes valid users = %s create mask = 0770 directory mask = 0770 force create mode = 0660 force directory mode = 2770 inherit owner = no [printers] comment = All Printers path = /var/spool/cups browseable = no printable = yes

  Read the article

< Previous Page | 100 101 102 103 104 105 106 107 108 109 110 111  | Next Page >