Search Results

Search found 19964 results on 799 pages for 'daniel key'.

Page 104/799 | < Previous Page | 100 101 102 103 104 105 106 107 108 109 110 111  | Next Page >

• IE9 Beta

  - by Daniel Moth

  I've been using Internet Explorer 8 since the early pre-release bits, but I never tried IE9 until today – the day the Beta is available. I downloaded it from here: http://www.beautyoftheweb.com/ The download took longer than what I expected, but I was doing other stuff, so no bother. After coming down, it asked me to reboot my computer. Really hate when apps do that, but I did it anyway. The first time I launched it, it prompted me with a list of add-ons I should disable including the start-up time that I could save fore each one. It even let me configure the prompt so, for example, it won't prompt me again unless an add-on contributes to more than 1 second of the startup time. Cool. First thing I noticed is that the search bar had gone and, as you'd expect, you have to search from the address box. I totally despise this feature. The first thing I've been doing with all versions of IE is to turn off the automatic searching from the address bar and now I have no way of searching if I do that. Ridiculous. The second thing I notice is that the tabs are next to the address bar and cannot be moved to go below it. One word for that decision: appalling (and, no, I didn't accidentally drop an 'e' and added an 'l' in the previous word). The third thing I notice to the right is the favorites button (star icon) and when I click on it, it brings up the favorites explorer under it on the right; then I pin the explorer and it jumps to the left(!). Why move the entry point to this feature to the right instead of leaving it on the left is beyond me (other than wanting to retrain me on what I've been used to for all this time), but the fact that pinning it makes it jump sides is… an "astonishing" design decision. As I browse I notice a little annoying pop up in the bottom left every time I hover over a link; there is no status bar. I correctly guessed to right click at the top and turn on the status bar (which also got rid of the popup thereafter) and while I am at it, I bring back my favorites bar which was hidden by default (and am pleased to see that all my favorites are still there). The next thing I notice, I like: IE9 is fast. No joke, I visit sites and they seem to be loading visibly much faster – try it! Beyond the speed, I am interested to find out what else is new. I searched and found a few good links: What's new in Internet Explorer 9 Internet Explorer 9 Features (check out the links under "Clean") Top Features If you are a developer, check out IE's msdn home for many articles, e.g. this section on Canvas and SVG. Either way: wherever you are, get IE9 Beta now and judge for yourself. If you don't like it, you can always uninstall (which auto-restores the previous version). Comments about this post welcome at the original blog.

  Read the article

• SSH login very slow on OS X Leopard

  - by acjohnson55

  My SSH sessions take a very long time to initiate. This applies for logins with and without passwords, interactive and non-interactive. I have tried setting 'GSSAPIAuthentication no' and 'IPQoS 0x00' on the client side, and 'UseDNS no' on the server side, but no dice. I'm really stumped and frustrated. The worst part is that it SFTP takes forever to establish connections too, making file transfer much longer than it would be otherwise. I thought the problem might be something with PAM, because of where the hang is in the sshd log below, so I tried commenting out each line one-by-one in the /etc/pam.d/sshd file. Some caused login to be impossible, some had no apparent effect. I can't really tell if PAM is stalling for other services, but I can say that su'ing into my account from another account with 'su -l' has no apparent delay. I tried creating a new user account, just to see if there was something wrong with my existing account, and the same problem persisted. Any ideas of what's going on? On the client side, the most verbose mode outputs (redacted where reasonable): OpenSSH_5.9p1, OpenSSL 0.9.8r 8 Feb 2011 debug1: Reading configuration data ... debug1: ... line 1: Applying options for ... debug1: Reading configuration data /etc/ssh_config debug1: /etc/ssh_config line 20: Applying options for * debug1: /etc/ssh_config line 53: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to ... [x.x.x.x] port 22. debug1: Connection established. debug1: identity file /.../.ssh/id_rsa type -1 debug1: identity file /.../.ssh/id_rsa-cert type -1 debug3: Incorrect RSA1 identifier debug3: Could not load "/.../.ssh/id_dsa" as a RSA1 public key debug1: identity file /.../.ssh/id_dsa type 2 debug1: identity file /.../.ssh/id_dsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.2 debug1: match: OpenSSH_5.2 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.9 debug2: fd 3 setting O_NONBLOCK debug3: load_hostkeys: loading entries for host "..." from file "/.../.ssh/known_hosts" debug3: load_hostkeys: found key type RSA in file /.../.ssh/known_hosts:9 debug3: load_hostkeys: loaded 1 keys debug3: order_hostkeyalgs: prefer hostkeyalgs: [email protected],[email protected],ssh-rsa debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: [email protected],[email protected],ssh-rsa,[email protected],[email protected],ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server->client aes128-ctr hmac-md5 none debug2: mac_setup: found hmac-md5 debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug2: dh_gen_key: priv key bits set: 136/256 debug2: bits set: 523/1024 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA ... debug3: load_hostkeys: loading entries for host "..." from file "/.../.ssh/known_hosts" debug3: load_hostkeys: found key type RSA in file /.../.ssh/known_hosts:9 debug3: load_hostkeys: loaded 1 keys debug3: load_hostkeys: loading entries for host "x.x.x.x" from file "/.../.ssh/known_hosts" debug3: load_hostkeys: found key type RSA in file /.../.ssh/known_hosts:9 debug3: load_hostkeys: loaded 1 keys debug1: Host '...' is known and matches the RSA host key. debug1: Found key in /.../.ssh/known_hosts:9 debug2: bits set: 492/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /.../.ssh/id_dsa (0x7f8b7b41d6c0) debug2: key: /.../.ssh/id_rsa (0x0) debug1: Authentications that can continue: publickey,password,keyboard-interactive debug3: start over, passed a different list publickey,password,keyboard-interactive debug3: preferred publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Offering DSA public key: /.../.ssh/id_dsa debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug1: Server accepts key: pkalg ssh-dss blen 434 debug2: input_userauth_pk_ok: fp ... debug3: sign_and_send_pubkey: DSA ... debug1: Authentication succeeded (publickey). Authenticated to ... ([x.x.x.x]:22). debug1: channel 0: new [client-session] debug3: ssh_session2_open: channel_new: 0 debug2: channel 0: send open debug1: Requesting [email protected] debug1: Entering interactive session. ****** Hangs here ****** debug2: callback start debug2: client_session2_setup: id 0 debug2: fd 3 setting TCP_NODELAY debug2: channel 0: request pty-req confirm 1 debug1: Sending environment. debug3: Ignored env TERM_PROGRAM debug3: Ignored env SHELL debug3: Ignored env TERM debug3: Ignored env TMPDIR debug3: Ignored env Apple_PubSub_Socket_Render debug3: Ignored env TERM_PROGRAM_VERSION debug3: Ignored env TERM_SESSION_ID debug3: Ignored env USER debug3: Ignored env COMMAND_MODE debug3: Ignored env SSH_AUTH_SOCK debug3: Ignored env Apple_Ubiquity_Message debug3: Ignored env __CF_USER_TEXT_ENCODING debug3: Ignored env PATH debug3: Ignored env MKL_NUM_THREADS debug3: Ignored env PWD debug1: Sending env LANG = en_US.UTF-8 debug2: channel 0: request env confirm 0 debug3: Ignored env HOME debug3: Ignored env SHLVL debug3: Ignored env DYLD_LIBRARY_PATH debug3: Ignored env PYTHONPATH debug3: Ignored env LOGNAME debug3: Ignored env DISPLAY debug3: Ignored env SECURITYSESSIONID debug3: Ignored env _ debug2: channel 0: request shell confirm 1 debug2: callback done debug2: channel 0: open confirm rwindow 0 rmax 32768 debug2: channel_input_status_confirm: type 99 id 0 debug2: PTY allocation request accepted on channel 0 debug2: channel 0: rcvd adjust 2097152 debug2: channel_input_status_confirm: type 99 id 0 debug2: shell request accepted on channel 0 On the server side, the debug output looks like: Sep 16 18:46:40 ... sshd[31435]: debug1: inetd sockets after dupping: 3, 4 Sep 16 18:46:40 ... sshd[31435]: Connection from x.x.x.x port 52758 Sep 16 18:46:40 ... sshd[31435]: debug1: Current Session ID is 56AC0FB0 / Session Attributes are 00008000 Sep 16 18:46:40 ... sshd[31435]: debug1: Running in inetd mode in a non-root session... assuming inetd created the session for us. Sep 16 18:46:40 ... sshd[31435]: debug1: Client protocol version 2.0; client software version OpenSSH_5.9 Sep 16 18:46:40 ... sshd[31435]: debug1: match: OpenSSH_5.9 pat OpenSSH* Sep 16 18:46:40 ... sshd[31435]: debug1: Enabling compatibility mode for protocol 2.0 Sep 16 18:46:40 ... sshd[31435]: debug1: Local version string SSH-2.0-OpenSSH_5.2 Sep 16 18:46:40 ... sshd[31435]: debug1: Checking with Service ACLs for ssh login restrictions Sep 16 18:46:40 ... sshd[31435]: debug1: call to mbr_user_name_to_uuid with <...> suceeded to retrieve user_uuid Sep 16 18:46:40 ... sshd[31435]: debug1: Call to mbr_check_service_membership failed with status <0> Sep 16 18:46:40 ... sshd[31435]: debug1: PAM: initializing for "..." Sep 16 18:46:40 ... sshd[31435]: debug1: PAM: setting PAM_RHOST to "x.x.x.x" Sep 16 18:46:40 ... sshd[31435]: Failed none for ... from x.x.x.x port 52758 ssh2 Sep 16 18:46:40 ... sshd[31435]: debug1: temporarily_use_uid: 509/20 (e=0/0) Sep 16 18:46:40 ... sshd[31435]: debug1: trying public key file /.../.ssh/authorized_keys Sep 16 18:46:40 ... sshd[31435]: debug1: restore_uid: 0/0 Sep 16 18:46:40 ... sshd[31435]: debug1: temporarily_use_uid: 509/20 (e=0/0) Sep 16 18:46:40 ... sshd[31435]: debug1: trying public key file /.../.ssh/authorized_keys2 Sep 16 18:46:40 ... sshd[31435]: debug1: fd 5 clearing O_NONBLOCK Sep 16 18:46:40 ... sshd[31435]: debug1: matching key found: file /.../.ssh/authorized_keys2, line 1 Sep 16 18:46:40 ... sshd[31435]: Found matching DSA key: ... Sep 16 18:46:40 ... sshd[31435]: debug1: restore_uid: 0/0 Sep 16 18:46:40 ... sshd[31435]: debug1: temporarily_use_uid: 509/20 (e=0/0) Sep 16 18:46:40 ... sshd[31435]: debug1: trying public key file /.../.ssh/authorized_keys Sep 16 18:46:40 ... sshd[31435]: debug1: restore_uid: 0/0 Sep 16 18:46:40 ... sshd[31435]: debug1: temporarily_use_uid: 509/20 (e=0/0) Sep 16 18:46:40 ... sshd[31435]: debug1: trying public key file /.../.ssh/authorized_keys2 Sep 16 18:46:40 ... sshd[31435]: debug1: fd 5 clearing O_NONBLOCK Sep 16 18:46:40 ... sshd[31435]: debug1: matching key found: file /.../.ssh/authorized_keys2, line 1 Sep 16 18:46:40 ... sshd[31435]: Found matching DSA key: ... Sep 16 18:46:40 ... sshd[31435]: debug1: restore_uid: 0/0 Sep 16 18:46:40 ... sshd[31435]: debug1: ssh_dss_verify: signature correct Sep 16 18:46:40 ... sshd[31435]: debug1: do_pam_account: called Sep 16 18:46:40 ... sshd[31435]: Accepted publickey for ... from x.x.x.x port 52758 ssh2 Sep 16 18:46:40 ... sshd[31435]: debug1: monitor_child_preauth: ... has been authenticated by privileged process Sep 16 18:46:40 ... sshd[31435]: debug1: PAM: establishing credentials ***** Hangs here ***** Sep 16 18:46:54 ... sshd[31435]: User child is on pid 31654 Sep 16 18:46:54 ... sshd[31654]: debug1: PAM: establishing credentials Sep 16 18:46:54 ... sshd[31654]: debug1: permanently_set_uid: 509/20 Sep 16 18:46:54 ... sshd[31654]: debug1: Entering interactive session for SSH2. Sep 16 18:46:54 ... sshd[31654]: debug1: server_init_dispatch_20 Sep 16 18:46:54 ... sshd[31654]: debug1: server_input_channel_open: ctype session rchan 0 win 1048576 max 16384 Sep 16 18:46:54 ... sshd[31654]: debug1: input_session_request Sep 16 18:46:54 ... sshd[31654]: debug1: channel 0: new [server-session] Sep 16 18:46:54 ... sshd[31654]: debug1: session_new: session 0 Sep 16 18:46:54 ... sshd[31654]: debug1: session_open: channel 0 Sep 16 18:46:54 ... sshd[31654]: debug1: session_open: session 0: link with channel 0 Sep 16 18:46:54 ... sshd[31654]: debug1: server_input_channel_open: confirm session Sep 16 18:46:54 ... sshd[31654]: debug1: server_input_global_request: rtype [email protected] want_reply 0 Sep 16 18:46:54 ... sshd[31654]: debug1: server_input_channel_req: channel 0 request pty-req reply 1 Sep 16 18:46:54 ... sshd[31654]: debug1: session_by_channel: session 0 channel 0 Sep 16 18:46:54 ... sshd[31654]: debug1: session_input_channel_req: session 0 req pty-req Sep 16 18:46:54 ... sshd[31654]: debug1: Allocating pty. Sep 16 18:46:54 ... sshd[31435]: debug1: session_new: session 0 Sep 16 18:46:54 ... sshd[31654]: debug1: session_pty_req: session 0 alloc /dev/ttys008 Sep 16 18:46:54 ... sshd[31654]: debug1: server_input_channel_req: channel 0 request env reply 0 Sep 16 18:46:54 ... sshd[31654]: debug1: session_by_channel: session 0 channel 0 Sep 16 18:46:54 ... sshd[31654]: debug1: session_input_channel_req: session 0 req env Sep 16 18:46:54 ... sshd[31654]: debug1: server_input_channel_req: channel 0 request shell reply 1 Sep 16 18:46:54 ... sshd[31654]: debug1: session_by_channel: session 0 channel 0 Sep 16 18:46:54 ... sshd[31654]: debug1: session_input_channel_req: session 0 req shell Sep 16 18:46:54 ... sshd[31655]: debug1: Setting controlling tty using TIOCSCTTY.

  Read the article

• Links to C++ documentation

  - by Daniel Moth

  After a recent talk I gave on C++ AMP, one attendee was complaining that they were not familiar with lambdas and another found templates hard to parse. In case you are in the same boat, I thought I'd gather some essential reading material for you (also gives me one link to use in the future for referring people to ;-) Lambdas are available (in some shape or form) in all modern languages, so do yourself a favor and learn about them: Lambda Expressions in C++ (and also syntax and examples) Watch Herb Sutter's full length session on lambdas at PDC 2010 Templates, have been around in modern languages for even longer than lambdas (e.g. Generics in .NET), so again go dive in: Templates topic with full table of contents linking to subtopics In fact, why don't you refresh your knowledge and read the entire msdn C++ Language Reference – that's what I am doing! If you are looking to keep up to date with what is happening in the C++ world, stay tuned on the Visual C++ team (aka WinC++ team) blog and ask questions in the C++ forums. Comments about this post welcome at the original blog.

  Read the article

• Which design better when use foreign key instead of a string to store a list of id

  - by Kien Thanh

  I'm building online examination system. I have designed to table, Question and GeneralExam. The table GeneralExam contains info about the exam like name, description, duration,... Now I would like to design table GeneralQuestion, it will contain the ids of questions belongs to a general exam. Currently, I have two ideas to design GeneralQuestion table: It will have two columns: general_exam_id, question_id. It will have two columns: general_exam_id, list_question_ids (string/text). I would like to know which designing is better, or pros and cons of each designing. I'm using Postgresql database.

  Read the article

• Are you a GPGPU developer? Participate in our UX study

  - by Daniel Moth

  You know that I work on the parallel debugger in Visual Studio and I've talked about GPGPU before and I have also mentioned UX. Below is a request from my UX colleagues that pulls all of it together. If you write and debug parallel code that uses GPUs for non-graphical, computationally intensive operations keep reading. The Microsoft Visual Studio Parallel Computing team is seeking developers for a 90-minute research study. The study will take place via LiveMeeting or at a usability lab in Redmond, depending on your preference. We will walk you through an example of debugging GPGPU code in Visual Studio with you giving us step-by-step feedback. ("Is this what you would you expect?", "Are we showing you the things that would help you?", "How would you improve this") The walkthrough utilizes a “paper” version of our current design. After the walkthrough, we would then show you some additional design ideas and seek your input on various design tradeoffs. Are you interested or know someone who might be a good fit? Let us know at this address: [email protected]. Those who participate (and those who referred them), will receive a gratuity item from a list of current Microsoft products. Comments about this post welcome at the original blog.

  Read the article

• SSH onto Ubuntu box using RSA keys

  - by jex

  I recently installed OpenSSH on one of my Ubuntu machines and I've been running into problems getting it to use RSA keys. I've generated the RSA key on the client (ssh-keygen), and appended the public key generated to both the /home/jex/.ssh/authorized_keys and /etc/ssh/authorized_keys files on the server. However, when I try to login (ssh -o PreferredAuthorizations=publickey jex@host -v [which forces the use of public key for login]) I get the following output: debug1: Host 'pentheon.local' is known and matches the RSA host key. debug1: Found key in /home/jex/.ssh/known_hosts:2 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received Banner message debug1: Authentications that can continue: publickey,keyboard-interactive debug1: Next authentication method: publickey debug1: Offering public key: /home/jex/.ssh/id_rsa debug1: Authentications that can continue: publickey,keyboard-interactive debug1: Trying private key: /home/jex/.ssh/identity debug1: Trying private key: /home/jex/.ssh/id_dsa debug1: No more authentication methods to try. Permission denied (publickey,keyboard-interactive). I'm not entirely sure where I've gone wrong. I am willing to post my /etc/ssh/sshd_config if needed.

  Read the article

• Are you a GPGPU developer? Participate in our UX study

  - by Daniel Moth

  You know that I work on the parallel debugger in Visual Studio and I've talked about GPGPU before and I have also mentioned UX. Below is a request from my UX colleagues that pulls all of it together. If you write and debug parallel code that uses GPUs for non-graphical, computationally intensive operations keep reading. The Microsoft Visual Studio Parallel Computing team is seeking developers for a 90-minute research study. The study will take place via LiveMeeting or at a usability lab in Redmond, depending on your preference. We will walk you through an example of debugging GPGPU code in Visual Studio with you giving us step-by-step feedback. ("Is this what you would you expect?", "Are we showing you the things that would help you?", "How would you improve this") The walkthrough utilizes a “paper” version of our current design. After the walkthrough, we would then show you some additional design ideas and seek your input on various design tradeoffs. Are you interested or know someone who might be a good fit? Let us know at this address: [email protected]. Those who participate (and those who referred them), will receive a gratuity item from a list of current Microsoft products. Comments about this post welcome at the original blog.

  Read the article

• What changes were made to a document

  - by Daniel Moth

  Part of my job is writing functional specs. Due to the inevitable iterative and incremental nature of software design/development, these specs need to be updated with additions/deletions/changes over a period of time. When the time comes for a developer to implement features or update their design document (or a tester to test the feature or update their test specs) they need to be doing that against the latest spec. The problem is that if they have reviewed this document already, they need a quick way to find the delta from the last time they reviewed it to see what changes exist and how their existing plans may be affected (instead of having to read the entire document again). Doing that is very easy assuming your Word documents are hosted on SharePoint. 1. Every time you review a document note the SharePoint version and/or date (if it is a printed copy, make sure your printout includes the date in the footer – all my specs do) 2. When you need to see what changed, open the document (make sure you are not using a cached or local offline copy) and on the ribbon go to the "Review" tab and then  click on the "Compare" button. 3. Click on the "Specific Version…" option. In the dialog that pops up pick the last version you reviewed and click the "Compare" button. [TIP for authors: before checkin of your document, always compare against the "Last Version" on the SharePoint so you can add appropriate more complete check in comments] 4. What you see now is that in addition to the document you have open, two other documents just opened up. One is in the background (flashing on your task bar) – close that one as it is the old version. 5. The other document is in the foreground and contains all the changes between the old version and the latest one. Be sure not to make edits to this document, use it only for reading the changes. To find all the changes, on the ribbon under the "Review" tab, click on the "Reviewing Pane" to open the reviewing pane on the left. You can now click on each pink change to see what it is. 6. When you are done reviewing changes close the document and don't save any changes (remember if you want to make edits/additions/comments make them in the original document which is still open). And now I have a URL to point to people that keep asking about this – enjoy  :-) Comments about this post welcome at the original blog.

  Read the article

• Guide.BeginShowMessageBox wrapper

  - by Daniel Moth

  While coding for Windows Phone 7 using Silverlight, I was really disappointed with the built-in MessageBox class, so I found an alternative. My disappointment was the fact that: Display of the messagebox causes the phone to vibrate (!) Display of the messagebox causes the phone to make an annoying sound. You can only have "ok" and "cancel" buttons (no other button captions). I was using the messagebox something like this: // Produces unwanted sound and vibration. // ...plus no customization of button captions. if (MessageBox.Show("my message", "my caption", MessageBoxButton.OKCancel) == MessageBoxResult.OK) { // Do something Debug.WriteLine("OK"); } …and wanted to make minimal changes throughout my code to change it to this: // no sound or vibration // ...plus bonus of customizing button captions if (MyMessageBox.Show("my message", "my caption", "ok, got it", "that sucks") == MyMessageBoxResult.Button1) { // Do something Debug.WriteLine("OK"); } It turns out there is a much more powerful class in the XNA framework that delivered on my requirements (and offers even more features that I didn't need like choice of sounds and not blocking the caller): Guide.BeginShowMessageBox. You can use it simply by adding an assembly reference to Microsoft.Xna.Framework.GamerServices. I wrote a little wrapper for my needs and you can find it here (ready to enhance with your needs): MyMessageBox.cs.txt. Comments about this post welcome at the original blog.

  Read the article

• Logstash agent doesn't run as a daemon on MAC OS X 10.9.1

  - by user329324

  I need to run the logstash agent as a Daemon on an MAC OS X System whenever the system boots up terminal: /usr/local/logstash/bin/logstash agent -f /usr/local/etc/cvlog.conf Per terminal the program is working succesfully but as an daemon it doesn't start. My com.bcd.logstash.plist <plist version="1.0"> <dict> <key>Label</key> <string>com.bcd.logstash</string> <key>KeepAlive</key> <dict> <key>SuccessfulExit</key> </false> </dict> <key>ProgramArguments</key> <array> <string>/usr/local/logstash/bin/logstash</string> <string>agent</string> <string>-f</string> <string>/usr/local/etc/cvlog.conf</string> </array> <key>RunAtLoad</key> </true> </dict> </plist> I start with: launchtl load /Library/LaunchDaemons/com.bcd.logstash.plist Syslog Error Message com.apple.launchd[1] (com.bcd.logstash[pid]): Exited with code:1 com.apple.launchd[1] (com.bcd.logstash[pid]): Exited with code:143 What's wrong with my plist?

  Read the article

• Are you at Super Computing 10?

  - by Daniel Moth

  Like last year, I was going to attend SC this year, but other events are unfortunately keeping me here in Seattle next week. If you are going to be in New Orleans, have fun and be sure not to miss out on the following two opportunities. MPI Debugging UX Study Throughout the week, my team is conducting 90-minute studies on debugging MPI applications within Visual Studio. In exchange for your feedback (under NDA) you will receive a Microsoft Gratuity (and the knowledge that you are impacting the development of Visual Studio). If you are interested, sign up at the Microsoft Information Desk in the Exhibitor Hall during exhibit hours. Outside of exhibit hours, send email to [email protected]. If you took part in the GPGPU study, this is very similar except it is for MPI. Microsoft High Performance Computing Summit On Monday 15th, the Microsoft annual user group meeting takes place. Shuttle transportation and lunch is provided. For full details of this event and to register, please visit the official event page. Comments about this post welcome at the original blog.

  Read the article

• X technology is dead

  - by Daniel Moth

  Every so often, technology pundits (i.e. people not involved in the game, but who like commenting about it) throw out big controversial statements (typically to increase their readership), with a common one being that "Technology/platform X is dead". My former colleague (who I guess is now my distant colleague) uses the same trick with his blog post: "iPhone 4 is dead". But, his motivation is to set the record straight (and I believe him) by sharing his opinion on recent commentary around Silverlight, WPF etc. I enjoyed his post and the comments, so I hope you do too :-) Comments about this post welcome at the original blog.

  Read the article

• Monitor network connectivity in WP7 apps

  - by Daniel Moth

  Most interesting Windows Phone apps rely on some network service for their functionality. So at some point in your app you may need to know programmatically if there is network connection available or not. For example, the Translator by Moth app relies on the Bing Translation service for translations. When a request for translation (text or voice) is made, the network call may fail. The failure reason is not evident from any of the return results, so I check the connection to see if it is present. Dependent on that, a different message is shown to the user. Before the translation phase is even reached, at the app start up time the Bing service is queried for its list of  languages; in that case I don't want to show the user a message and instead want to be notified when the network is available in order to send the query out again. So for those two requirements (which I imagine are common in other apps) I wrote a simple wrapper MyNetwork static class to the framework APIs: Call once MyNetwork.MonitorNetworkAvailability() method so it monitors the network change At any time check the MyNetwork.IsConnected property to check for network presence Subscribe to its MyNetwork.ConnectionEstablished event Optionally, during debugging use its MyNetwork.ChangeStatus method to simulate a change in network status As usual, there may be better ways to achieve this, but this class works perfectly for my scenarios. You can download the code here: MyNetworks.cs. Comments about this post welcome at the original blog.

  Read the article

• Supporting copy 'n paste in your Windows Phone app

  - by Daniel Moth

  Some Windows Phone 7 owners already have the NoDo update, and others are getting it soon. This update brings, among other things, copy & paste support for text boxes. The user taps on a piece of text (and can drag in either direction to select more/less words), a popup icon appears that when tapped copies the text to the clipboard, and then at any app that shows the soft input panel there is an icon option to paste the copied text into the associated textbox. For more read this 'how to'. Note that there is no programmatic access to the clipboard, only the end user experience I just summarized, so there is nothing you need to do for your app's textboxes to support copy & paste: it just works. The only issue may be if in your app you use static TextBlock controls, for which the copy support will not appear, of course. That was the case with my Translator by Moth app where the translated text appears in a TextBlock. So, I wanted the user to be able to copy directly from the translated text (without offering an editable TextBox for an area where user input does not make sense). Take a look at a screenshot of my app before I made any changes to it. I then made changes to it preserving the look and feel, yet with additional copy support (see screenshot on the right)! So how did I achieve that? Simply by using my co-author's template (thanks Peter!): Copyable TextBlock for Windows Phone.   (aside: in my app even without this change there is a workaround, the user could use the "swap" feature to swap the source and target, so they can copy from the text box) Comments about this post welcome at the original blog.

  Read the article

• What are the Key Requirements for Privacy Control Software?

  Are you concerned about protecting your privacy regarding your computer activities? With today?s personal computers and operating systems insuring your privacy on your personal computer requires much... [Author: Chet Childers - Computers and Internet - August 24, 2009]

  Read the article

• Speaking at AMD Fusion conference

  - by Daniel Moth

  Next Wednesday at 2pm I will be presenting a session at the AMD Fusion developer summit in Bellevue, Washington State. For more on this conference please visit the official website. If you filter the catalog by 'Speaker Last Name' to "Moth", you'll find my talk. For your convenience, below is the title and abstract Blazing-fast code using GPUs and more, with Microsoft Visual C++ To get full performance out of mainstream hardware, high-performance code needs to harness, not only multi-core CPUs, but also GPUs (whether discrete cards or integrated in the processor) and other compute accelerators to achieve orders-of-magnitude speed-up for data parallel algorithms. How can you as a C++ developer fully utilize all that heterogeneous hardware from your Visual Studio environment? How can your code benefit from this tremendous performance boost without sacrificing your developer productivity or the portability of your solution? The answers will be presented in this session that introduces a new technology from Microsoft. Hope to see many of you there! Comments about this post welcome at the original blog.

  Read the article

• Problems with bash script, mysql inserts and launchd

  - by Armands

  ========= I am developing a automated system, which consists of 3 parts: mysql, bash and launchd. Bash script takes folders of work related stuff, zips, archives and puts info about them into database that is located on a local MAMP server. Everything works as expected when I run the script from terminal. But when I use Launchd to automatically run this script, it functions without errors and it does not put the values into database. I've tried to make logs of returned messages, but the logs end up being empty as the command has run the way it was supposed to. Any help would be appreciated! .plist contents <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>Label</key> <string>com.adevo.ari.zip</string> <key>ProgramArguments</key> <array> <string>/Volumes/Archive-Plus/B-ARCHIVE-PLUS/ZZ_UTILITY_FOLDER/Compress.sh</string> </array> <key>Nice</key> <integer>1</integer> <key>StartInterval</key> <integer>120</integer> <key>RunAtLoad</key> <true/> </dict> </plist> I made this .plist file just by searching the web.

  Read the article

• SSL certificate for Oracle Application Server 11g

  - by Easter Sunshine

  I was asked to get an SSL certificate for an "Oracle Application Server 11g" which has a soon-to-expire certificate. Brushing aside the fact that 10g seems to be the newest version, I got a certificate from InCommon, as I usually do without problem (except this is the first time I supplied Oracle Application Server 11g as the software type on the CSR form). On the email containing links to download the certificate, it mentioned: Certificate Details: SSL Type : InCommon SSL Server : OTHER I forwarded the email over to the person responsible for installing it and got a reply that the server type must be Oracle Application Server for the certificate to work (the CN is the same as before). They were unable to install this certificate (no details provided to me) and mentioned they had this issue previously with Thawte when they didn't supply Oracle Application Server as the server type. I don't see any significant difference between the currently installed certificate (working) and the new one I just got signed by InCommon (not working). $ openssl x509 -in sso-current.cer -text shows, with irrelevant information ommitted. Data: Version: 3 (0x2) Signature Algorithm: sha1WithRSAEncryption Issuer: C=ZA, ST=Western Cape, L=Cape Town, O=Thawte Consulting cc, OU=Certification Services Division, CN=Thawte Premium Server CA/[email protected] Validity Not Before: Oct 1 00:00:00 2009 GMT Not After : Nov 28 23:59:59 2012 GMT Subject Public Key Info: Public Key Algorithm: rsaEncryption Public-Key: (2048 bit) Modulus: Exponent: 65537 (0x10001) X509v3 extensions: X509v3 Basic Constraints: critical CA:FALSE X509v3 CRL Distribution Points: Full Name: URI:http://crl.thawte.com/ThawteServerPremiumCA.crl X509v3 Extended Key Usage: TLS Web Server Authentication, TLS Web Client Authentication Authority Information Access: OCSP - URI:http://ocsp.thawte.com Signature Algorithm: sha1WithRSAEncryption and $ openssl x509 -in sso-new.cer -text shows Data: Version: 3 (0x2) Signature Algorithm: sha1WithRSAEncryption Issuer: C=US, O=Internet2, OU=InCommon, CN=InCommon Server CA Validity Not Before: Nov 8 00:00:00 2012 GMT Not After : Nov 8 23:59:59 2014 GMT Subject Public Key Info: Public Key Algorithm: rsaEncryption Public-Key: (2048 bit) Modulus: Exponent: 65537 (0x10001) X509v3 extensions: X509v3 Authority Key Identifier: keyid:48:4F:5A:FA:2F:4A:9A:5E:E0:50:F3:6B:7B:55:A5:DE:F5:BE:34:5D X509v3 Subject Key Identifier: 18:8D:F6:F5:87:4D:C4:08:7B:2B:3F:02:A1:C7:AC:6D:A7:90:93:02 X509v3 Key Usage: critical Digital Signature, Key Encipherment X509v3 Basic Constraints: critical CA:FALSE X509v3 Extended Key Usage: TLS Web Server Authentication, TLS Web Client Authentication X509v3 Certificate Policies: Policy: 1.3.6.1.4.1.5923.1.4.3.1.1 CPS: https://www.incommon.org/cert/repository/cps_ssl.pdf X509v3 CRL Distribution Points: Full Name: URI:http://crl.incommon.org/InCommonServerCA.crl Authority Information Access: CA Issuers - URI:http://cert.incommon.org/InCommonServerCA.crt OCSP - URI:http://ocsp.incommon.org Nothing jumps out at me as the reason one would not work so I don't have a specific request for the signer for what to do differently when re-signing.

  Read the article

• Heading to GTC 2010

  - by Daniel Moth

  Next week the GPU Technology Conference (GTC) 2010 takes place in San Jose, CA and I am lucky enough to be attending the entire week. It has been an extremely long time (in fact, I can't remember the last time) where I am registered as an attendee at a conference (full pass/access) without being a speaker *and* without having any booth duty! Having said that, we (our team at Microsoft) will be running GPU debugging UX studies throughout the entire week (similar to what I had previously advertised). If you are attending GTC 2010 and you are interested, look for the related flyer in your conference bag. The conference is an excellent opportunity to connect in-person with various individuals that I have only met virtually. From an educational perspective there is a very long and interesting session list, with multiple concurrent slots, making it very hard to choose between them, but I have managed to create my (packed) schedule. I am most looking forward to sessions on the programming languages and tools, both from Microsoft and MS partners. For full conference details, visit the GTC 2010 official page. Comments about this post welcome at the original blog.

  Read the article

• how to setup .ssh directory inside an encrypted volume on Mac OSX and still have public key logins?

  - by Vitaly Kushner

  I have my .ssh directory inside an encrypted sparse image. i.e. ~/.ssh is a symlink to /Volumes/VolumeName/.ssh The problem is that when I try to ssh into that machine using a public key I see the following error message in /var/log/secure.log: Authentication refused: bad ownership or modes for directory /Volumes Any way to solve this in a clean way? Update: The permissions on ~/.ssh and authorized_keys are right: > ls -ld ~ drwxr-xr-x+ 77 vitaly staff 2618 Mar 16 08:22 /Users/vitaly/ > ls -l ~/.ssh lrwxr-xr-x 1 vitaly staff 22 Mar 15 23:48 /Users/vitaly/.ssh@ -> /Volumes/Astrails/.ssh > ls -ld /Volumes/Astrails/.ssh drwx------ 3 vitaly staff 646 Mar 15 23:46 /Volumes/Astrails/.ssh/ > ls -ld /Volumes/Astrails/ drwx--x--x@ 18 vitaly staff 1360 Jan 12 22:05 /Volumes/Astrails// > ls -ld /Volumes/ drwxrwxrwt@ 5 root admin 170 Mar 15 20:38 /Volumes// error message sats the problem is with /Volumes, but I don't see the problem. Yes it is o+w but it is also +t which should be ok but apparently isn't. The problem is I can't change /Volumes permissions (or rather shouldn't) but I do want public key login to work. First I thought of mounting the image on other place then /Volumes, but it is automaunted on login by standard OSX mounting. I asked about it here: How to change disk image's default mount directory on osx The only answer I got is "you can't" ;) I could hack my way around, by writing some shellscript that will manually mounting volume at a non-standard location but it would be a gross hack, I'm still looking for a cleaner way to do what I need.

  Read the article

• Why does key-based ssh fail even after setting up the authorized_keys file on the remote host?

  - by Brad Grissom

  These details don't matter but I am on a Ubuntu 12.04 machine and I want to ssh into my RaspberryPi without a password. I followed the standard procedure for setting up ssh without a password: local $ ssh-keygen -t rsa (hit enter for defaults to the questions) local $ scp ~/.ssh/id_rsa.pub matt@raspihost:~/.ssh/authorized_keys I logged onto the raspihost and checked all my permissions on ~/.ssh/ and on the authorized_keys file itself. It was still not working!

  Read the article

• How does one remove an encryption type from a kerberos principal?

  - by 84104

  I would like to remove all of the des keys from the principal below, but have no idea how to do so without someone inputting the password. kadmin: getprinc user Principal: [email protected] Expiration date: [never] Last password change: Thu May 26 08:52:51 PDT 2013 Password expiration date: [none] Maximum ticket life: 0 days 12:00:00 Maximum renewable life: 7 days 00:00:00 Last modified: Tue Jul 16 15:17:18 PDT 2013 (administrator/[email protected]) Last successful authentication: Wed Jul 24 14:40:53 PDT 2013 Last failed authentication: [never] Failed password attempts: 0 Number of keys: 8 Key: vno 3, aes256-cts-hmac-sha1-96, no salt Key: vno 3, arcfour-hmac, no salt Key: vno 3, des3-cbc-sha1, no salt Key: vno 3, des-cbc-crc, no salt Key: vno 3, des-cbc-md5, no salt Key: vno 3, des-cbc-md5, Version 5 - No Realm Key: vno 3, des-cbc-md5, Version 5 - Realm Only Key: vno 3, des-cbc-md5, AFS version 3 MKey: vno 2 Attributes: REQUIRES_PRE_AUTH Policy: [none] Also, the the kdc is using an OpenLDAP backend.

  Read the article

• How do I use key combinations on an axis on a joystick in xorg?

  - by valadil

  I'm using xserver-xorg-input-joystick on Debian Stable so I can use a joystick in place of the mouse. I have mouse movement working correctly, but got stuck trying to add functions for some other keys. These work: #Left stick #Pointer Option "MapAxis1" "mode=relative axis=1.5x" Option "MapAxis2" "mode=relative axis=1.5y" #Right stick #Arrow keys Option "MapAxis4" "mode=relative keylow=Left keyhigh=Right" Option "MapAxis5" "mode=relative keylow=Up keyhigh=Down" But when I try to make key combos (so I can navigate windows and screens in xmonad) I have no luck. #dpad #xmonad focus #up/down toggle window. l/r choose screen. Option "MapAxis8" "mode=relative keylow=Super_L,k keyhigh=Super_L,j" Option "MapAxis7" "mode=relative keylow=Super_L,w keyhigh=Super_L,e" I've also tried Super_R, plain old Super, Meta, and mod4mask, and anything else I can think of. These buttons print the letter, but don't appear to hold down the modifying key. The exception to that is shift. If I specify Shift_L or Shift_R, I get a capital letter. xev indicates that modifier keys are being pressed. If I lower Axis8, I get press Super_L, press k, release k, release Super_L. That looks like it should be working. Maybe this is an xmonad problem and not a joystick driver one? I'm also having trouble with getting an axis to use other XF86 keys: # triggers # song selection Option "MapAxis3" "mode=relative keylow=none keyhigh=XF86AudioForward" Option "MapAxis6" "mode=relative keylow=none keyhigh=XF86AudioBack" That does nothing. Any idea why? If it turns out that this isn't something I can do on an axis, but would work with a button, is there a way to treat my joysticks as buttons? Also, if anyone has suggestions for the other 5 buttons I'll have left after mouse buttons are bound, I'm listening.

  Read the article

• Join our team at Microsoft

  - by Daniel Moth

  If you are looking for a SDE or SDET job at Microsoft, keep on reading. Back in January I posted a Dev Lead opening on our team, which was quickly filled internally (by Maria Blees). Our team is part of the recently announced Microsoft Technical Computing group. Specifically, we are working on new debugger functionality, integrated with Visual Studio (we are starting work on the next version), aimed to address HPC and GPGPU scenarios (and continuing the Parallel Debugging scenarios we started addressing with VS2010). We now have many more openings on our debugger team. We posted three of those on the careers website: Software Development Engineer Software Development Engineer II Software Development Engineer in Test II (don't let the word "Test" fool you: An SDET on our team is no different than a developer in any way, including the skills required) Please do read the contents of the links above. Specifically, note that for both positions you need to be as proficient in writing C++ code as you are with managed code (WPF experience is a plus). If you think you have what it takes, you wish to join a quality and schedule driven project, and want to contribute features to a product that has global impact, then send me your resume and I'll pass it on to the hiring managers. Comments about this post welcome at the original blog.

  Read the article

• User eXperience

  - by Daniel Moth

  The last few months I have been spending a lot of time designing (and help design) the developer experience for the areas I contribute to (in future versions of Visual Studio). As a technical person who defines feature sets, it is easy to get engulfed in the pure technical side of things and ignore the details that ultimately make users "love" using the product to achieve their goal, instead of just "having to use" it. Engaging in UX design helps me escape that trap. In case you are also interested in the UX side of development, I thought I'd share an interesting site I came across: UX myths. In particular, I recommend reading myths 9, 10, 12, 13, 14, 15 and 21. Let me know if there are other UX resources you recommend… Comments about this post welcome at the original blog.

  Read the article

< Previous Page | 100 101 102 103 104 105 106 107 108 109 110 111  | Next Page >