Search Results

Search found 16336 results on 654 pages for 'device admin'.

Page 104/654 | < Previous Page | 100 101 102 103 104 105 106 107 108 109 110 111  | Next Page >

• Need a place to store a few bytes of meta information on storage media

  - by Jason C

  I'm working on an embedded project. I need a place to store some filesystem-independent meta information on a storage device. The device has an MSDOS partition table. The device also may have unallocated space (depending on its size) but it will be TRIMmed (and also may be blown away by new partitions in the future). I need a location on the device that is not unallocated and that has a low risk of being touched (outside of completely erasing the device). The device is only guaranteed to have an MBR at the point the meta data needs to first be written; meaning there are no EBRs/VBRs present that I could use. There are 446 bytes at the very start of the device available for MBR bootstrap code. Currently my only idea is to store data at the end of this block. However, the device is bootable and I have no way of knowing if I'd be blowing away bootstrap code or not. The sector size is 512 bytes and the MBR is the first sector, I'm pretty sure (correct me if I'm wrong) that that means the second sector is available for use by partition data, so I can't use that either. Does anybody have any ideas? I need 4 bytes of space.

  Read the article

• Know more about shared pool subpool

  - by Liu Maclean(???)

  ????T.askmaclean.com???Shared Pool?SubPool?????,????????_kghdsidx_count ? subpool ??subpool????( ???duration)???: SQL> select * from v$version; BANNER ---------------------------------------------------------------- Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi PL/SQL Release 10.2.0.5.0 - Production CORE    10.2.0.5.0      Production TNS for Linux: Version 10.2.0.5.0 - Production NLSRTL Version 10.2.0.5.0 - Production SQL> set linesize 200 pagesize 1400 SQL> show parameter kgh NAME                                 TYPE                             VALUE ------------------------------------ -------------------------------- ------------------------------ _kghdsidx_count                      integer                          7 SQL> oradebug setmypid; Statement processed. SQL> oradebug dump heapdump 536870914; Statement processed. SQL> oradebug tracefile_name /s01/admin/G10R25/udump/g10r25_ora_11783.trc [oracle@vrh8 dbs]$ grep "sga heap"  /s01/admin/G10R25/udump/g10r25_ora_11783.trc HEAP DUMP heap name="sga heap"  desc=0x60000058 HEAP DUMP heap name="sga heap(1,0)"  desc=0x60036110 FIVE LARGEST SUB HEAPS for heap name="sga heap(1,0)"   desc=0x60036110 HEAP DUMP heap name="sga heap(2,0)"  desc=0x6003f938 FIVE LARGEST SUB HEAPS for heap name="sga heap(2,0)"   desc=0x6003f938 HEAP DUMP heap name="sga heap(3,0)"  desc=0x60049160 FIVE LARGEST SUB HEAPS for heap name="sga heap(3,0)"   desc=0x60049160 HEAP DUMP heap name="sga heap(4,0)"  desc=0x60052988 FIVE LARGEST SUB HEAPS for heap name="sga heap(4,0)"   desc=0x60052988 HEAP DUMP heap name="sga heap(5,0)"  desc=0x6005c1b0 FIVE LARGEST SUB HEAPS for heap name="sga heap(5,0)"   desc=0x6005c1b0 HEAP DUMP heap name="sga heap(6,0)"  desc=0x600659d8 FIVE LARGEST SUB HEAPS for heap name="sga heap(6,0)"   desc=0x600659d8 HEAP DUMP heap name="sga heap(7,0)"  desc=0x6006f200 FIVE LARGEST SUB HEAPS for heap name="sga heap(7,0)"   desc=0x6006f200 SQL> alter system set "_kghdsidx_count"=6 scope=spfile; System altered. SQL> startup force; ORACLE instance started. Total System Global Area  859832320 bytes Fixed Size                  2100104 bytes Variable Size             746587256 bytes Database Buffers          104857600 bytes Redo Buffers                6287360 bytes Database mounted. Database opened. SQL> SQL> oradebug setmypid; Statement processed. SQL> oradebug dump heapdump 536870914; Statement processed. SQL> oradebug tracefile_name /s01/admin/G10R25/udump/g10r25_ora_11908.trc [oracle@vrh8 dbs]$ grep "sga heap"  /s01/admin/G10R25/udump/g10r25_ora_11908.trc HEAP DUMP heap name="sga heap"  desc=0x60000058 HEAP DUMP heap name="sga heap(1,0)"  desc=0x600360f0 FIVE LARGEST SUB HEAPS for heap name="sga heap(1,0)"   desc=0x600360f0 HEAP DUMP heap name="sga heap(2,0)"  desc=0x6003f918 FIVE LARGEST SUB HEAPS for heap name="sga heap(2,0)"   desc=0x6003f918 HEAP DUMP heap name="sga heap(3,0)"  desc=0x60049140 FIVE LARGEST SUB HEAPS for heap name="sga heap(3,0)"   desc=0x60049140 HEAP DUMP heap name="sga heap(4,0)"  desc=0x60052968 FIVE LARGEST SUB HEAPS for heap name="sga heap(4,0)"   desc=0x60052968 HEAP DUMP heap name="sga heap(5,0)"  desc=0x6005c190 FIVE LARGEST SUB HEAPS for heap name="sga heap(5,0)"   desc=0x6005c190 HEAP DUMP heap name="sga heap(6,0)"  desc=0x600659b8 FIVE LARGEST SUB HEAPS for heap name="sga heap(6,0)"   desc=0x600659b8 SQL> SQL> alter system set "_kghdsidx_count"=2 scope=spfile; System altered. SQL> SQL> startup force; ORACLE instance started. Total System Global Area  851443712 bytes Fixed Size                  2100040 bytes Variable Size             738198712 bytes Database Buffers          104857600 bytes Redo Buffers                6287360 bytes Database mounted. Database opened. SQL> oradebug setmypid; Statement processed. SQL> oradebug dump heapdump 2; Statement processed. SQL> oradebug tracefile_name /s01/admin/G10R25/udump/g10r25_ora_12003.trc [oracle@vrh8 ~]$ grep "sga heap"  /s01/admin/G10R25/udump/g10r25_ora_12003.trc HEAP DUMP heap name="sga heap"  desc=0x60000058 HEAP DUMP heap name="sga heap(1,0)"  desc=0x600360b0 HEAP DUMP heap name="sga heap(2,0)"  desc=0x6003f8d SQL> alter system set cpu_count=16 scope=spfile; System altered. SQL> startup force; ORACLE instance started. Total System Global Area  851443712 bytes Fixed Size                  2100040 bytes Variable Size             738198712 bytes Database Buffers          104857600 bytes Redo Buffers                6287360 bytes Database mounted. Database opened. SQL> oradebug setmypid; Statement processed. SQL>  oradebug dump heapdump 2; Statement processed. SQL> oradebug tracefile_name /s01/admin/G10R25/udump/g10r25_ora_12065.trc [oracle@vrh8 ~]$ grep "sga heap"  /s01/admin/G10R25/udump/g10r25_ora_12065.trc HEAP DUMP heap name="sga heap"  desc=0x60000058 HEAP DUMP heap name="sga heap(1,0)"  desc=0x600360b0 HEAP DUMP heap name="sga heap(2,0)"  desc=0x6003f8d8 SQL> show parameter sga_target NAME                                 TYPE                             VALUE ------------------------------------ -------------------------------- ------------------------------ sga_target                           big integer                      0 SQL> alter system set sga_target=1000M scope=spfile; System altered. SQL> startup force; ORACLE instance started. Total System Global Area 1048576000 bytes Fixed Size                  2101544 bytes Variable Size             738201304 bytes Database Buffers          301989888 bytes Redo Buffers                6283264 bytes Database mounted. Database opened. SQL> alter system set sga_target=1000M scope=spfile; System altered. SQL> startup force; ORACLE instance started. Total System Global Area 1048576000 bytes Fixed Size                  2101544 bytes Variable Size             738201304 bytes Database Buffers          301989888 bytes Redo Buffers                6283264 bytes Database mounted. Database opened. SQL> SQL> SQL> oradebug setmypid; Statement processed. SQL> oradebug dump heapdump 2; Statement processed. SQL>  oradebug tracefile_name /s01/admin/G10R25/udump/g10r25_ora_12148.trc SQL> SQL> Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit Production With the Partitioning, OLAP, Data Mining and Real Application Testing options [oracle@vrh8 dbs]$ grep "sga heap"  /s01/admin/G10R25/udump/g10r25_ora_12148.trc HEAP DUMP heap name="sga heap"  desc=0x60000058 HEAP DUMP heap name="sga heap(1,0)"  desc=0x60036690 HEAP DUMP heap name="sga heap(1,1)"  desc=0x60037ee8 HEAP DUMP heap name="sga heap(1,2)"  desc=0x60039740 HEAP DUMP heap name="sga heap(1,3)"  desc=0x6003af98 HEAP DUMP heap name="sga heap(2,0)"  desc=0x6003feb8 HEAP DUMP heap name="sga heap(2,1)"  desc=0x60041710 HEAP DUMP heap name="sga heap(2,2)"  desc=0x60042f68 _enable_shared_pool_durations:?????????10g????shared pool duration??,?????sga_target?0?????false; ???10.2.0.5??cursor_space_for_time???true??????false,???10.2.0.5??cursor_space_for_time????? SQL> alter system set "_enable_shared_pool_durations"=false scope=spfile; System altered. SQL> SQL> startup force; ORACLE instance started. Total System Global Area 1048576000 bytes Fixed Size                  2101544 bytes Variable Size             738201304 bytes Database Buffers          301989888 bytes Redo Buffers                6283264 bytes Database mounted. Database opened. SQL> oradebug setmypid; Statement processed. SQL> oradebug dump heapdump 2; Statement processed. SQL> oradebug tracefile_name /s01/admin/G10R25/udump/g10r25_ora_12233.trc SQL> SQL> Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit Production With the Partitioning, OLAP, Data Mining and Real Application Testing options\ [oracle@vrh8 dbs]$ grep "sga heap"   /s01/admin/G10R25/udump/g10r25_ora_12233.trc HEAP DUMP heap name="sga heap"  desc=0x60000058 HEAP DUMP heap name="sga heap(1,0)"  desc=0x60036690 HEAP DUMP heap name="sga heap(2,0)"  desc=0x6003feb8 ??:1._kghdsidx_count ??? shared pool subpool???, _kghdsidx_count???????7 ??? 7? shared pool subpool 2.??????? subpool???4? sub partition ?: sga heap(1,0) sga heap(1,1) sga heap(1,2) sga heap(1,3) ????? cpu??? ?????_kghdsidx_count, ???? ?10g ?AUTO SGA ??? shared pool duration???, duration ??4?: Session duration Instance duration (never freed) Execution duration (freed fastest) Free memory ??? shared pool duration???? ?10gR1?Shared Pool?shrink??????????,?????????????Buffer Cache???????????granule,????Buffer Cache?granule????granule header?Metadata(???buffer header??RAC??Lock Elements)????,?????????????????????shared pool????????duration(?????)?chunk??????granule?,????????????granule??10gR2????Buffer Cache Granule????????granule header?buffer?Metadata(buffer header?LE)????,??shared pool???duration?chunk????????granule,??????buffer cache?shared pool??????????????10gr2?streams pool?????????(???????streams pool duration????) reference : http://www.oracledatabase12g.com/archives/understanding-automatic-sga-memory-management.html

  Read the article

• android : bluetooth support

  - by Puneet kaur

  i have coded for bluetooth via defining a user task ,which will search the devices in background and set the list on foreground after finishing the search . but sometimes i am getting the data in adapter as "nodevice" "device1" "device2" ...... the problem here is why it is always filling the no device in the list and after that fill the device in list .. private BroadcastReceiver mBlueToothInfoDiscoveryListener = new BroadcastReceiver() { /** * This is an overridden function called by the framework whenever there * is some broadcast message for Bluetooth info discovery listener */ @Override public void onReceive(Context context, Intent intent) { String action = intent.getAction(); // When discovery finds a device if (BluetoothDevice.ACTION_FOUND.equals(action)) { // Get the BluetoothDevice object from the Intent BluetoothDevice device = intent.getParcelableExtra(BluetoothDevice.EXTRA_DEVICE); // If it's already paired, skip it, because it's been listed // already if (device.getBondState() != BluetoothDevice.BOND_BONDED) { mNewBtDevicesArrayAdapter.add(device.getName() + "\n" + device.getAddress()); } // When discovery is finished, change the Activity title } else if (BluetoothAdapter.ACTION_DISCOVERY_FINISHED.equals(action)) { setProgressBarIndeterminateVisibility(false); setTitle("device list"); if (mNewBtDevicesArrayAdapter.getCount() == 0) { String noDevices = "No devices found"; mNewBtDevicesArrayAdapter.add(noDevices); } } } }; but here why it is sometimes going into else option on start and filling the list with no device then to if part again ... when devices are already on .

  Read the article

• 8 Things You Can Do In Android’s Developer Options

  - by Chris Hoffman

  The Developer Options menu in Android is a hidden menu with a variety of advanced options. These options are intended for developers, but many of them will be interesting to geeks. You’ll have to perform a secret handshake to enable the Developer Options menu in the Settings screen, as it’s hidden from Android users by default. Follow the simple steps to quickly enable Developer Options. Enable USB Debugging “USB debugging” sounds like an option only an Android developer would need, but it’s probably the most widely used hidden option in Android. USB debugging allows applications on your computer to interface with your Android phone over the USB connection. This is required for a variety of advanced tricks, including rooting an Android phone, unlocking it, installing a custom ROM, or even using a desktop program that captures screenshots of your Android device’s screen. You can also use ADB commands to push and pull files between your device and your computer or create and restore complete local backups of your Android device without rooting. USB debugging can be a security concern, as it gives computers you plug your device into access to your phone. You could plug your device into a malicious USB charging port, which would try to compromise you. That’s why Android forces you to agree to a prompt every time you plug your device into a new computer with USB debugging enabled. Set a Desktop Backup Password If you use the above ADB trick to create local backups of your Android device over USB, you can protect them with a password with the Set a desktop backup password option here. This password encrypts your backups to secure them, so you won’t be able to access them if you forget the password. Disable or Speed Up Animations When you move between apps and screens in Android, you’re spending some of that time looking at animations and waiting for them to go away. You can disable these animations entirely by changing the Window animation scale, Transition animation scale, and Animator duration scale options here. If you like animations but just wish they were faster, you can speed them up. On a fast phone or tablet, this can make switching between apps nearly instant. If you thought your Android phone was speedy before, just try disabling animations and you’ll be surprised how much faster it can seem. Force-Enable FXAA For OpenGL Games If you have a high-end phone or tablet with great graphics performance and you play 3D games on it, there’s a way to make those games look even better. Just go to the Developer Options screen and enable the Force 4x MSAA option. This will force Android to use 4x multisample anti-aliasing in OpenGL ES 2.0 games and other apps. This requires more graphics power and will probably drain your battery a bit faster, but it will improve image quality in some games. This is a bit like force-enabling antialiasing using the NVIDIA Control Panel on a Windows gaming PC. See How Bad Task Killers Are We’ve written before about how task killers are worse than useless on Android. If you use a task killer, you’re just slowing down your system by throwing out cached data and forcing Android to load apps from system storage whenever you open them again. Don’t believe us? Enable the Don’t keep activities option on the Developer options screen and Android will force-close every app you use as soon as you exit it. Enable this app and use your phone normally for a few minutes — you’ll see just how harmful throwing out all that cached data is and how much it will slow down your phone. Don’t actually use this option unless you want to see how bad it is! It will make your phone perform much more slowly — there’s a reason Google has hidden these options away from average users who might accidentally change them. Fake Your GPS Location The Allow mock locations option allows you to set fake GPS locations, tricking Android into thinking you’re at a location where you actually aren’t. Use this option along with an app like Fake GPS location and you can trick your Android device and the apps running on it into thinking you’re at locations where you actually aren’t. How would this be useful? Well, you could fake a GPS check-in at a location without actually going there or confuse your friends in a location-tracking app by seemingly teleporting around the world. Stay Awake While Charging You can use Android’s Daydream Mode to display certain apps while charging your device. If you want to force Android to display a standard Android app that hasn’t been designed for Daydream Mode, you can enable the Stay awake option here. Android will keep your device’s screen on while charging and won’t turn it off. It’s like Daydream Mode, but can support any app and allows users to interact with them. Show Always-On-Top CPU Usage You can view CPU usage data by toggling the Show CPU usage option to On. This information will appear on top of whatever app you’re using. If you’re a Linux user, the three numbers on top probably look familiar — they represent the system load average. From left to right, the numbers represent your system load over the last one, five, and fifteen minutes. This isn’t the kind of thing you’d want enabled most of the time, but it can save you from having to install third-party floating CPU apps if you want to see CPU usage information for some reason. Most of the other options here will only be useful to developers debugging their Android apps. You shouldn’t start changing options you don’t understand. If you want to undo any of these changes, you can quickly erase all your custom options by sliding the switch at the top of the screen to Off.     

  Read the article

• Slow boot on Ubuntu 12.04

  - by Hailwood

  My Ubuntu is booting really slow (Windows is booting faster...). I am using Ubuntu a Dell Inspiron 1545 Pentium(R) Dual-Core CPU T4300 @ 2.10GHz, 4GB Ram, 500GB HDD running Ubuntu 12.04 with gnome-shell 3.4.1. After running dmesg the culprit seems to be this section, in particular the last three lines: [26.557659] ADDRCONF(NETDEV_UP): eth0: link is not ready [26.565414] ADDRCONF(NETDEV_UP): eth0: link is not ready [27.355355] Console: switching to colour frame buffer device 170x48 [27.362346] fb0: radeondrmfb frame buffer device [27.362347] drm: registered panic notifier [27.362357] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0 [27.617435] init: udev-fallback-graphics main process (1049) terminated with status 1 [30.064481] init: plymouth-stop pre-start process (1500) terminated with status 1 [51.708241] CE: hpet increased min_delta_ns to 20113 nsec [59.448029] eth2: no IPv6 routers present But I have no idea how to start debugging this. sudo lshw -C video $ sudo lshw -C video *-display description: VGA compatible controller product: RV710 [Mobility Radeon HD 4300 Series] vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 32 bits clock: 33MHz capabilities: pm pciexpress msi vga_controller bus_master cap_list rom configuration: driver=fglrx_pci latency=0 resources: irq:48 memory:e0000000-efffffff ioport:de00(size=256) memory:f6df0000-f6dfffff memory:f6d00000-f6d1ffff After loading the propriety driver my new dmesg log is below (starting from the first major time gap): [2.983741] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [25.094327] ADDRCONF(NETDEV_UP): eth0: link is not ready [25.119737] udevd[520]: starting version 175 [25.167086] lp: driver loaded but no devices found [25.215341] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [25.215345] Disabling lock debugging due to kernel taint [25.231924] wmi: Mapper loaded [25.318414] lib80211: common routines for IEEE802.11 drivers [25.318418] lib80211_crypt: registered algorithm 'NULL' [25.331631] [fglrx] Maximum main memory to use for locked dma buffers: 3789 MBytes. [25.332095] [fglrx] vendor: 1002 device: 9552 count: 1 [25.334206] [fglrx] ioport: bar 1, base 0xde00, size: 0x100 [25.334229] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [25.334235] pci 0000:01:00.0: setting latency timer to 64 [25.337109] [fglrx] Kernel PAT support is enabled [25.337140] [fglrx] module loaded - fglrx 8.96.4 [Mar 12 2012] with 1 minors [25.342803] Adding 4189180k swap on /dev/sda7. Priority:-1 extents:1 across:4189180k [25.364031] type=1400 audit(1338241723.027:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=606 comm="apparmor_parser" [25.364491] type=1400 audit(1338241723.031:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=606 comm="apparmor_parser" [25.364760] type=1400 audit(1338241723.031:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=606 comm="apparmor_parser" [25.394328] wl 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [25.394343] wl 0000:0c:00.0: setting latency timer to 64 [25.415531] acpi device:36: registered as cooling_device2 [25.416688] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:34/LNXVIDEO:00/input/input6 [25.416795] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [25.416865] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [25.425133] lib80211_crypt: registered algorithm 'TKIP' [25.448058] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [25.448321] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X [25.448353] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [25.738867] eth1: Broadcom BCM4315 802.11 Hybrid Wireless Controller 5.100.82.38 [25.761213] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [25.761406] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [25.783432] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [25.908318] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro [25.928155] input: Dell WMI hotkeys as /devices/virtual/input/input9 [25.960561] udevd[543]: renamed network interface eth1 to eth2 [26.285688] init: failsafe main process (835) killed by TERM signal [26.396426] input: PS/2 Mouse as /devices/platform/i8042/serio2/input/input10 [26.423108] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio2/input/input11 [26.511297] Bluetooth: Core ver 2.16 [26.511383] NET: Registered protocol family 31 [26.511385] Bluetooth: HCI device and connection manager initialized [26.511388] Bluetooth: HCI socket layer initialized [26.511391] Bluetooth: L2CAP socket layer initialized [26.512079] Bluetooth: SCO socket layer initialized [26.530164] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [26.530168] Bluetooth: BNEP filters: protocol multicast [26.553893] type=1400 audit(1338241724.219:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=928 comm="apparmor_parser" [26.554860] Bluetooth: RFCOMM TTY layer initialized [26.554866] Bluetooth: RFCOMM socket layer initialized [26.554868] Bluetooth: RFCOMM ver 1.11 [26.557910] type=1400 audit(1338241724.223:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=927 comm="apparmor_parser" [26.559166] type=1400 audit(1338241724.223:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=928 comm="apparmor_parser" [26.559574] type=1400 audit(1338241724.223:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=928 comm="apparmor_parser" [26.575519] type=1400 audit(1338241724.239:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=931 comm="apparmor_parser" [26.581100] type=1400 audit(1338241724.247:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=931 comm="apparmor_parser" [26.582794] type=1400 audit(1338241724.247:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=929 comm="apparmor_parser" [26.605672] ppdev: user-space parallel port driver [27.592475] sky2 0000:09:00.0: eth0: enabling interface [27.604329] ADDRCONF(NETDEV_UP): eth0: link is not ready [27.606962] ADDRCONF(NETDEV_UP): eth0: link is not ready [27.852509] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [27.852513] vesafb: scrolling: redraw [27.852515] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [27.852523] mtrr: type mismatch for e0000000,400000 old: write-back new: write-combining [27.852527] mtrr: type mismatch for e0000000,200000 old: write-back new: write-combining [27.852531] mtrr: type mismatch for e0000000,100000 old: write-back new: write-combining [27.852534] mtrr: type mismatch for e0000000,80000 old: write-back new: write-combining [27.852538] mtrr: type mismatch for e0000000,40000 old: write-back new: write-combining [27.852541] mtrr: type mismatch for e0000000,20000 old: write-back new: write-combining [27.852544] mtrr: type mismatch for e0000000,10000 old: write-back new: write-combining [27.852548] mtrr: type mismatch for e0000000,8000 old: write-back new: write-combining [27.852551] mtrr: type mismatch for e0000000,4000 old: write-back new: write-combining [27.852554] mtrr: type mismatch for e0000000,2000 old: write-back new: write-combining [27.852558] mtrr: type mismatch for e0000000,1000 old: write-back new: write-combining [27.853154] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005580000, using 3072k, total 3072k [27.853405] Console: switching to colour frame buffer device 128x48 [27.853426] fb0: VESA VGA frame buffer device [28.539800] fglrx_pci 0000:01:00.0: irq 48 for MSI/MSI-X [28.540552] [fglrx] Firegl kernel thread PID: 1168 [28.540679] [fglrx] Firegl kernel thread PID: 1169 [28.540789] [fglrx] Firegl kernel thread PID: 1170 [28.540932] [fglrx] IRQ 48 Enabled [29.845620] [fglrx] Gart USWC size:1236 M. [29.845624] [fglrx] Gart cacheable size:489 M. [29.845629] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [29.845632] [fglrx] Reserved FB block: Unshared offset:fc21000, size:3df000 [29.845635] [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000 [59.700023] eth2: no IPv6 routers present

  Read the article

• Forked-daapd with alternative soundcard

  - by Mah

  I am trying to configure forked-daapd on my computer, and everything goes well except that in configuration file I can not set a new value for the line corresponding to soundcard. This is the default code in the config file: #card = "default" I want to use a soundcard called "DG2", which is the soundcard no.1 and has a first device that ALSA recognizes as no.0. So, I change the line to the following: card = "hw:DG2,0" I restart the daapd service and the next time I play a file through iTune remote, I get a message in my server log file saying that it can not play the file because the device is busy. Any change in the device name will return a different error, saying that the device does not exist. I am pretty sure no other uses this external device, and I don't understand why I get this message. I have tried hwplug as well, with no result.

  Read the article

• No rear audio when front jack is connected

  - by Shanoop

  I have Ubuntu 14.04 64bit dual booted. When I connect something on front audio jack then rear audio is not working. I have tried changing analolog-output-headphones.conf file. After changing that alsamixer showing that both centre and surround not muted with full volum. Unfortunately no audio. aplay -l **** List of PLAYBACK Hardware Devices **** card 0: SB [HDA ATI SB], device 0: ALC887-VD Analog [ALC887-VD Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: SB [HDA ATI SB], device 1: ALC887-VD Digital [ALC887-VD Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 8: HDMI 2 [HDMI 2] Subdevices: 1/1 Subdevice #0: subdevice #0

  Read the article

• Ask the Readers: Are You A Second Screen Multi-tasker?

  - by Jason Fitzpatrick

  Television watchers are no longer keeping their eyes continuously glued to the screen–increasingly smartphone, tablet, and laptop users have merged their mobile device and television time. Are you one of the second screen multi-taskers? Image courtesy of Umani, a TV-companion application for iPad. According to Nielsen user surveys, at least 80% of mobile device owners have used their device while watching television in the past month–27% said they use their mobile device alongside the television multiple times a day. What the survey results are light on, however, is an in depth look at what the users are doing with their second screen. This week we want to hear about whether or not you’re one of the second screen multi-taskers and what you use your mobile device for during your television/movie time. Sound off in the comments and then check back in on Friday for the What You Said roundup. How to Get Pro Features in Windows Home Versions with Third Party Tools HTG Explains: Is ReadyBoost Worth Using? HTG Explains: What The Windows Event Viewer Is and How You Can Use It

  Read the article

• Oracle ADF Mobile - Develop iOS and Android Mobile Applications with Oracle ADF

  - by Shay Shmeltzer

  We are very happy to announce the release of Oracle ADF Mobile.  The new Oracle ADF Mobile enables developers to build applications that run on iOS and Android devices. Several unique aspects to Oracle ADF Mobile solution: Develop once run on many - same code base used for both iOS and Android applicaitons Uses Java - no need to learn device specific languages Leverage ADF - same concepts you are familiar with (component based UI construction, taskflow, data controls) Leverage JDeveloper - same development environment you know, same declarative and visual style. Create native looking applications - HTML 5 based UI components (that you can also skin) Use device services - Leverage the camera, SMS, location, contact etc without learning device specific APIs Create Hybrid applications - run on the device and able to consume remote data and UI if needed Here is the 3 minute introduction Oracle ADF Mobile is available as an extension to Oracle JDeveloper 11.1.2.3 - use the help->check for updates to install it. Then head over to the Oracle ADF Mobile page for all the resources you need. If you are an Oracle ADF developer, it's time to update your resume - you are now a mobile device developer too :-)

  Read the article

• Insurance Outlook: Just Right of Center

  - by Chuck Johnston Admin

  On Tuesday June 21st, PwC lead a session at the International Insurance Society meeting in Toronto focused on the opportunity in insurance.  The scenarios focusing on globalization, regulation and new areas of insurance opportunity were well defined and thought provoking, but the most interesting part of the session was the audience participation. PwC used a favorite strategic planning tool of mine, scenario planning, to highlight the important financial, political, social and technological dimensions that impact the insurance industry. Using wireless polling keypads, the audience was able to participate in scoring a range of possibilities across each dimension using a 1 to 5 ranking; 1 being generally negative or highly pessimistic scenarios and 5 being very positive or more confident scenarios. The results were then displayed on a screen with a line or "center" in the middle. "Left of center" was defined as being highly cautious and conservative, while "right of center" was defined as a more optimistic outlook for the industry's future. This session was attended by insurance carriers' senior leadership, leading insurance academics, senior regulators, and the occasional insurance technology executive. In general, the average answer fell just right of center, i.e. a little more positive or optimistic than center. Three years ago, after the 2008 financial crisis, I suspect the answers would have skewed more sharply to the left of center. This sense that things are generally getting better for insurers and that there is the potential for positive change pervaded the conference. There is still caution and concern around economic factors, regulation (especially the potential pitfalls of regulatory convergence with banking) and talent management, but in general, the industry outlook is more positive than it's been in several years. Chuck Johnston is vice president of industry strategy, Oracle Insurance. 

  Read the article

• Monitor resolution messed up, monitor is unknown.

  - by Kaustubh P

  Is there anyway to reset my monitor? My moitor is using the xorg.conf file. I use 10.04, without any Graphics Card. My monitor is an Acer X193W, with a native resolution of 1440x900. This is my xorg.conf file: Section "Screen" Identifier "Configured Screen Device" Device "Configured Video Device" Monitor "Test" DefaultDepth 16 SubSection "Display" Depth 16 Modes "1440x900_60.00" EndSubSection EndSection #Section "Device" # Identifier "Configured Video Device" # HorizSync # VertRefresh #EndSection I still cant view the native resolution, even when defined in the xorg file. An way I can revert to the default, or delete some files, to make the system detect the monitor again? My last resort is the cvt method, and adding it to the xrandr file. EDIT: I use Intel Drivers. My /proc/fb contains 0 VGA16 VGA

  Read the article

• How to forward an Internet connection to another network?

  - by Naveen

  Can somebody please make a shot & sweet tutorial telling how to forward an Internet connection to different network interfaces in Ubuntu...? This is the idea: I'm using a 3G usb modem to get Internet on my laptop ,which is: ppp0 IP=10.225.174.70 My Wifi device is: wlan0 MAC=78:e4:00:d4:3d:85 These devices are determined from ifconfig command. I want to share ppp0's internet connection with wlan0 device, so I can connect any other device to wlan0 and browse internet from that device. Making a Hotspot using Network settings GUI doesn't do the trick because the other device won't receive Internet, it just connects to wlan0. I heard iptables can do this, but I'm totally confused by the alien commands seen online. I'm no expert in networking. Please compose a clear & simple answer using the above devices. This is a huge annoying problem for iPhone & tablet users came to Ubuntu from Windows.

  Read the article

• Unable to use TL-WN821N

  - by udiw

  Hi, I got a TP-LINK USB wireless module - TL-WN821N, using Ubuntu 10.4 (same problems were also seen in 10.10). From everything I've read online, the usb should work just fine, since the Atheros ar9170 is built into the kernel. However, when I plug it in, it is detected as a USB device, but there is no wlan associated with it, and basically - nothing happens. Am I doing something wrong? what should I do so that the Atheros driver is associated with this device? btw, on Windows it works fine (with the drivers). Some logs: $ uname -mr 2.6.32-28-generic i686 $ lsb_release -d Description: Ubuntu 10.04.2 LTS $ lsusb ... (trimmed) Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 017: ID 0cf3:7015 Atheros Communications, Inc. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub $ lsmod |grep ar9 ar9170usb 51296 0 ath 7611 1 ar9170usb mac80211 205402 3 ar9170usb,iwl3945,iwlcore cfg80211 126528 5 ar9170usb,ath,iwl3945,iwlcore,mac80211 led_class 2864 4 ar9170usb,iwl3945,iwlcore,sdhci

  Read the article

• How do I mount my External HDD with filesystem type errors?

  - by Snuggie

  I am a relatively new Ubuntu user and I am having some difficulty mounting my external 2TB HDD. When I first installed Linux my external HDD was working just fine, however, it has stopped working and I have a lot of important files on there that I need. Before my HDD would automatically mount and no worries. Now, however, it doesn't automatically mount and when I try to manually mount it I keep running into filesystem type errors that I can't seem to get past. Below are images that depict my step by step process of how I am trying to mount my HDD along with the errors I am receiving. If anybody has any idea what I am doing wrong or how to correct the issue I would greatly appreciate it. Step 1) Ensure the computer recognizes my external HDD. pj@PJ:~$ dmesg ... [ 5790.367910] scsi 7:0:0:0: Direct-Access WD My Passport 0748 1022 PQ: 0 ANSI: 6 [ 5790.368278] scsi 7:0:0:1: Enclosure WD SES Device 1022 PQ: 0 ANSI: 6 [ 5790.370122] sd 7:0:0:0: Attached scsi generic sg2 type 0 [ 5790.370310] ses 7:0:0:1: Attached Enclosure device [ 5790.370462] ses 7:0:0:1: Attached scsi generic sg3 type 13 [ 5792.971601] sd 7:0:0:0: [sdb] 3906963456 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 5792.972148] sd 7:0:0:0: [sdb] Write Protect is off [ 5792.972162] sd 7:0:0:0: [sdb] Mode Sense: 47 00 10 08 [ 5792.972591] sd 7:0:0:0: [sdb] No Caching mode page found [ 5792.972605] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 5792.975235] sd 7:0:0:0: [sdb] No Caching mode page found [ 5792.975249] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 5792.987504] sdb: sdb1 [ 5792.988900] sd 7:0:0:0: [sdb] No Caching mode page found [ 5792.988911] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 5792.988920] sd 7:0:0:0: [sdb] Attached SCSI disk Step 2) Check if it mounted properly (it does not) pj@PJ:~$ df -ah Filesystem Size Used Avail Use% Mounted on /dev/sda1 682G 3.9G 644G 1% / proc 0 0 0 - /proc sysfs 0 0 0 - /sys none 0 0 0 - /sys/fs/fuse/connections none 0 0 0 - /sys/kernel/debug none 0 0 0 - /sys/kernel/security udev 2.9G 4.0K 2.9G 1% /dev devpts 0 0 0 - /dev/pts tmpfs 1.2G 928K 1.2G 1% /run none 5.0M 0 5.0M 0% /run/lock none 2.9G 156K 2.9G 1% /run/shm gvfs-fuse-daemon 0 0 0 - /home/pj/.gvfs Step 3) Try mounting manually using NTFS and VFAT (both as SDB and SDB1) pj@PJ:~$ sudo mount /dev/sdb /media/Passport/ NTFS signature is missing. Failed to mount '/dev/sdb': Invalid argument The device '/dev/sdb' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around? pj@PJ:~$ sudo mount /dev/sdb1 /media/Passport/ NTFS signature is missing. Failed to mount '/dev/sdb1': Invalid argument The device '/dev/sdb1' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around? pj@PJ:~$ sudo mount -t ntfs /dev/sdb /media/Passport/ NTFS signature is missing. Failed to mount '/dev/sdb': Invalid argument The device '/dev/sdb' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around? pj@PJ:~$ sudo mount -t vfat /dev/sdb /media/Passport/ mount: wrong fs type, bad option, bad superblock on /dev/sdb, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so pj@PJ:~$ sudo mount -t ntfs /dev/sdb1 /media/Passport/ NTFS signature is missing. Failed to mount '/dev/sdb1': Invalid argument The device '/dev/sdb1' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around? pj@PJ:~$ sudo mount -t vfat /dev/sdb1 /media/Passport/ mount: wrong fs type, bad option, bad superblock on /dev/sdb1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so

  Read the article

• Ubuntu 14.04LTS - runtime video card configuration through Radeon driver

  - by RJVB

  How does one configure Radeon video cards when using the open source Radeon driver - power profile, vsync, etc? Why I try the widely documented solution (against overheating) that worked for me under LMDE (confirmed with kernels up to 3.12.6), I get the following error: $ sudo cat /sys/class/drm/card0/device/power_profile default $ sudo sh -c "echo mid > /sys/class/drm/card0/device/power_profile" sh: echo: I/O error Exit 1 And when I try suggestions from Arch's ATI wiki my modifications are simply ignored: $ sudo cat /sys/class/drm/card0/device/power_dpm_force_performance_level auto $ sudo sh -c "echo high> /sys/class/drm/card0/device/power_dpm_force_performance_level" $ sudo cat /sys/class/drm/card0/device/power_dpm_force_performance_level auto Is this something Ubuntu specific, or something introduced with the 3.13 version of the Radeon driver? I'm encountering this on 2 laptops, one with a Radeon HD6290 (integrated GPU), the other with a discrete RV710 card. The RV710 needs a specific power setting to prevent overheating under LMDE, fortunately it doesn't seem to overheat with the Ubuntu default setting.

  Read the article

• mount old ATA disk to USB adapter

  - by 213441265152351

  I am trying to recover data from an old Linux that was installed in a computer on an ATA hard drive. I found a ScanLogic USB-IDE, an ATA adapter to USB 1.0 similar to the one in the picture: and after switching it on, I plugged it into a laptop with Ubuntu 12.04. I am used to the drives being automatically mounted, but this one doesn't show up in /media. After doing a dmesg, all I got is this: [215298.671924] usb 2-1.1: new full-speed USB device number 5 using ehci_hcd [215298.767330] scsi19 : usb-storage 2-1.1:1.0 [215299.841701] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd [215300.017258] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd [215300.197050] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd [215300.372730] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd I tried plugging in the adapter to the three different USB ports in my laptop (one of them USB 3.0), but got no luck with any of them. Any ideas?

  Read the article

• How can I determine which GPU card is running at PCI Express 2.0 x16 & which is using x8?

  - by M. Tibbits

  Is there a way to determine the speed of the PCI Express connection to a specific card? I have three cards plugged in: two Nvidia GTX 480's (one at x16 & and one at x8) one Nvidia GTX 460 running at x8 Is there some way, either by a function call in C or an option to lspci that I can determine the bus speed of the graphics cards? When I only use one of the cards for my CUDA program, I'd like to use the one which is running at x16. Thanks! Note: lspci -vvv dumps out For the two GTX 480s. I don't see any differences that pertain to bus speed. 03:00.0 VGA compatible controller: nVidia Corporation Device 06c0 (rev a3) Subsystem: eVga.com. Corp. Device 1480 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at d4000000 (32-bit, non-prefetchable) [size=32M] Region 1: Memory at b0000000 (64-bit, prefetchable) [size=128M] Region 3: Memory at bc000000 (64-bit, prefetchable) [size=64M] Region 5: I/O ports at df00 [disabled] [size=128] [virtual] Expansion ROM at b8000000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: nvidia Kernel modules: nvidia, nvidiafb, nouveau 03:00.1 Audio device: nVidia Corporation Device 0be5 (rev a1) Subsystem: eVga.com. Corp. Device 1480 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 5 Region 0: [virtual] Memory at d7ffc000 (32-bit, non-prefetchable) [disabled] [size=16K] Capabilities: <access denied> 04:00.0 VGA compatible controller: nVidia Corporation Device 06c0 (rev a3) Subsystem: eVga.com. Corp. Device 1480 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at dc000000 (32-bit, non-prefetchable) [size=32M] Region 1: Memory at c0000000 (64-bit, prefetchable) [size=128M] Region 3: Memory at cc000000 (64-bit, prefetchable) [size=64M] Region 5: I/O ports at cf00 [size=128] [virtual] Expansion ROM at c8000000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: nvidia Kernel modules: nvidia, nvidiafb, nouveau 04:00.1 Audio device: nVidia Corporation Device 0be5 (rev a1) Subsystem: eVga.com. Corp. Device 1480 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 5 Region 0: Memory at dfffc000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> And the only differences I see relate specifically to the memory mapping: myComputer:~> diff card1 card2 3c3 < Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- --- > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- 7,11c7,11 < Region 0: Memory at d4000000 (32-bit, non-prefetchable) [size=32M] < Region 1: Memory at b0000000 (64-bit, prefetchable) [size=128M] < Region 3: Memory at bc000000 (64-bit, prefetchable) [size=64M] < Region 5: I/O ports at df00 [disabled] [size=128] < [virtual] Expansion ROM at b8000000 [disabled] [size=512K] --- > Region 0: Memory at dc000000 (32-bit, non-prefetchable) [size=32M] > Region 1: Memory at c0000000 (64-bit, prefetchable) [size=128M] > Region 3: Memory at cc000000 (64-bit, prefetchable) [size=64M] > Region 5: I/O ports at cf00 [size=128] > [virtual] Expansion ROM at c8000000 [disabled] [size=512K] 18c18 < Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- --- > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- 19a20 > Latency: 0, Cache Line Size: 64 bytes 21c22 < Region 0: [virtual] Memory at d7ffc000 (32-bit, non-prefetchable) [disabled] [size=16K] --- > Region 0: Memory at dfffc000 (32-bit, non-prefetchable) [size=16K]

  Read the article

• No HDMI sound output on Thinkpad X1

  - by nickf

  I'm having problems getting my sound to output via HDMI to my TV. When I go to Sound Settings, the HDMI device does not appear. ~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: PCH [HDA Intel PCH], device 0: CONEXANT Analog [CONEXANT Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 8: HDMI 2 [HDMI 2] Subdevices: 1/1 Subdevice #0: subdevice #0 I don't know if the video information is helpful, but anyway: ~$ sudo lshw -C video *-display description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:46 memory:d0000000-d03fffff memory:c0000000-cfffffff ioport:5000(size=64) Any suggestions for me?

  Read the article

• Battery life starts at 2:30 hrs (99%), but less than 1 minute later is only 1:30 hrs (99%)

  - by zondu

  After searching this and other forums, I haven't seen this same issue listed anywhere for Ubuntu 12. Prior to installing Ubuntu 12.10, my Netbook (Acer AspireOne D250, SATA HDD) was consistently getting 2:30-3 hrs battery life under Windows XP Home, SP3. However, immediately after installing Ubuntu 12.10, the battery life starts out at 2:30 hrs (99%), but less than 1 minute later suddenly drops to 1:30 hrs (99%), which seems very odd. It could be a complete coincidence that the battery is suddenly flaky at the exact same moment that Ubuntu 12.10 was installed, but that doesn't seem likely. I'm a newbie to Ubuntu, so I don't have much experience tweaking/trouble-shooting yet. Here's what I've tried so far: enabled laptop mode (sudo su, then echo 5 /proc/sys/vm/laptop_mode) and checked that it is running when the A/C adapter is unplugged, but it doesn't seem to have made any noticeable difference in battery life, installed Jupiter, but it didn't work and messed up the system, so I had to uninstall it, disabled bluetooth (wifi is still on b/c it is necessary), set the screen to lowest brightness, etc., run through at least 1 full power cycle (running until the netbook shut itself off due to critical battery) and have been using it normally (sometimes plugged in, often unplugged until the battery gets very low) for a week since installing Ubuntu 12.10. installed powertop, but have no idea how to interpret its results. Here are the results of acpi -b: w/ A/C adapter: Battery 0: Full, 100% immediately after unplugging: Battery 0: Discharging, 99%, 02:30:20 remaining 1 minute after unplugging: Battery 0: Discharging, 99%, 01:37:49 remaining 2-3 minutes after unplugging: Battery 0: Discharging, 95%, 01:33:01 remaining 10 minutes after unplugging: Battery 0: Discharging, 85%, 01:13:38 remaining Results of cat /sys/class/power_supply/BAT0/uevent: w/ A/C adapter: POWER_SUPPLY_NAME=BAT0 POWER_SUPPLY_STATUS=Full POWER_SUPPLY_PRESENT=1 POWER_SUPPLY_TECHNOLOGY=Li-ion POWER_SUPPLY_CYCLE_COUNT=0 POWER_SUPPLY_VOLTAGE_MIN_DESIGN=10800000 POWER_SUPPLY_VOLTAGE_NOW=12136000 POWER_SUPPLY_CURRENT_NOW=773000 POWER_SUPPLY_CHARGE_FULL_DESIGN=4500000 POWER_SUPPLY_CHARGE_FULL=1956000 POWER_SUPPLY_CHARGE_NOW=1956000 POWER_SUPPLY_MODEL_NAME=UM08B32 POWER_SUPPLY_MANUFACTURER=SANYO POWER_SUPPLY_SERIAL_NUMBER= immediately after unplugging: POWER_SUPPLY_NAME=BAT0 POWER_SUPPLY_STATUS=Discharging POWER_SUPPLY_PRESENT=1 POWER_SUPPLY_TECHNOLOGY=Li-ion POWER_SUPPLY_CYCLE_COUNT=0 POWER_SUPPLY_VOLTAGE_MIN_DESIGN=10800000 POWER_SUPPLY_VOLTAGE_NOW=11886000 POWER_SUPPLY_CURRENT_NOW=773000 POWER_SUPPLY_CHARGE_FULL_DESIGN=4500000 POWER_SUPPLY_CHARGE_FULL=1956000 POWER_SUPPLY_CHARGE_NOW=1937000 POWER_SUPPLY_MODEL_NAME=UM08B32 POWER_SUPPLY_MANUFACTURER=SANYO POWER_SUPPLY_SERIAL_NUMBER= 1 minute later: POWER_SUPPLY_NAME=BAT0 POWER_SUPPLY_STATUS=Discharging POWER_SUPPLY_PRESENT=1 POWER_SUPPLY_TECHNOLOGY=Li-ion POWER_SUPPLY_CYCLE_COUNT=0 POWER_SUPPLY_VOLTAGE_MIN_DESIGN=10800000 POWER_SUPPLY_VOLTAGE_NOW=11728000 POWER_SUPPLY_CURRENT_NOW=1174000 POWER_SUPPLY_CHARGE_FULL_DESIGN=4500000 POWER_SUPPLY_CHARGE_FULL=1956000 POWER_SUPPLY_CHARGE_NOW=1937000 POWER_SUPPLY_MODEL_NAME=UM08B32 POWER_SUPPLY_MANUFACTURER=SANYO POWER_SUPPLY_SERIAL_NUMBER= 2-3 minutes later: POWER_SUPPLY_NAME=BAT0 POWER_SUPPLY_STATUS=Discharging POWER_SUPPLY_PRESENT=1 POWER_SUPPLY_TECHNOLOGY=Li-ion POWER_SUPPLY_CYCLE_COUNT=0 POWER_SUPPLY_VOLTAGE_MIN_DESIGN=10800000 POWER_SUPPLY_VOLTAGE_NOW=11583000 POWER_SUPPLY_CURRENT_NOW=1209000 POWER_SUPPLY_CHARGE_FULL_DESIGN=4500000 POWER_SUPPLY_CHARGE_FULL=1956000 POWER_SUPPLY_CHARGE_NOW=1878000 POWER_SUPPLY_MODEL_NAME=UM08B32 POWER_SUPPLY_MANUFACTURER=SANYO POWER_SUPPLY_SERIAL_NUMBER= 10 minutes later: POWER_SUPPLY_NAME=BAT0 POWER_SUPPLY_STATUS=Discharging POWER_SUPPLY_PRESENT=1 POWER_SUPPLY_TECHNOLOGY=Li-ion POWER_SUPPLY_CYCLE_COUNT=0 POWER_SUPPLY_VOLTAGE_MIN_DESIGN=10800000 POWER_SUPPLY_VOLTAGE_NOW=11230000 POWER_SUPPLY_CURRENT_NOW=1239000 POWER_SUPPLY_CHARGE_FULL_DESIGN=4500000 POWER_SUPPLY_CHARGE_FULL=1956000 POWER_SUPPLY_CHARGE_NOW=1644000 POWER_SUPPLY_MODEL_NAME=UM08B32 POWER_SUPPLY_MANUFACTURER=SANYO POWER_SUPPLY_SERIAL_NUMBER= Results of upower -i /org/freedesktop/UPower/devices/battery_BAT0: w/ A/C adapter: native-path: /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0A:00/power_supply/BAT0 vendor: SANYO model: UM08B32 power supply: yes updated: Tue Nov 27 15:24:58 2012 (823 seconds ago) has history: yes has statistics: yes battery present: yes rechargeable: yes state: fully-charged energy: 21.1248 Wh energy-empty: 0 Wh energy-full: 21.1248 Wh energy-full-design: 48.6 Wh energy-rate: 8.3484 W voltage: 12.173 V percentage: 100% capacity: 43.4667% technology: lithium-ion immediately after unplugging: native-path: /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0A:00/power_supply/BAT0 vendor: SANYO model: UM08B32 power supply: yes updated: Tue Nov 27 15:41:25 2012 (1 seconds ago) has history: yes has statistics: yes battery present: yes rechargeable: yes state: discharging energy: 20.9196 Wh energy-empty: 0 Wh energy-full: 21.1248 Wh energy-full-design: 48.6 Wh energy-rate: 8.3484 W voltage: 11.86 V time to empty: 2.5 hours percentage: 99.0286% capacity: 43.4667% technology: lithium-ion History (charge): 1354023683 99.029 discharging 1 minute later: native-path: /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0A:00/power_supply/BAT0 vendor: SANYO model: UM08B32 power supply: yes updated: Tue Nov 27 15:42:31 2012 (17 seconds ago) has history: yes has statistics: yes battery present: yes rechargeable: yes state: discharging energy: 20.9196 Wh energy-empty: 0 Wh energy-full: 21.1248 Wh energy-full-design: 48.6 Wh energy-rate: 13.5432 W voltage: 11.753 V time to empty: 1.5 hours percentage: 99.0286% capacity: 43.4667% technology: lithium-ion History (charge): 1354023683 99.029 discharging History (rate): 1354023751 13.543 discharging 2-3 minutes later: native-path: /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0A:00/power_supply/BAT0 vendor: SANYO model: UM08B32 power supply: yes updated: Tue Nov 27 15:45:06 2012 (20 seconds ago) has history: yes has statistics: yes battery present: yes rechargeable: yes state: discharging energy: 20.2824 Wh energy-empty: 0 Wh energy-full: 21.1248 Wh energy-full-design: 48.6 Wh energy-rate: 13.7484 W voltage: 11.545 V time to empty: 1.5 hours percentage: 96.0123% capacity: 43.4667% technology: lithium-ion History (charge): 1354023906 96.012 discharging 1354023844 97.035 discharging History (rate): 1354023906 13.748 discharging 1354023875 12.992 discharging 1354023844 13.284 discharging 10 minutes later: native-path: /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0A:00/power_supply/BAT0 vendor: SANYO model: UM08B32 power supply: yes updated: Tue Nov 27 15:54:24 2012 (28 seconds ago) has history: yes has statistics: yes battery present: yes rechargeable: yes state: discharging energy: 18.1764 Wh energy-empty: 0 Wh energy-full: 21.1248 Wh energy-full-design: 48.6 Wh energy-rate: 13.2948 W voltage: 11.268 V time to empty: 1.4 hours percentage: 86.0429% capacity: 43.4667% technology: lithium-ion History (charge): 1354024433 86.043 discharging History (rate): 1354024464 13.295 discharging 1354024433 13.662 discharging 1354024402 13.781 discharging I noticed that between #2 and #3 (0 and 1 minutes after unplugging), while the battery still reports 99% charge and drops from 2:30 hr to 1:30 hr, the energy usage goes from 8.34 W to 13.54 W and the current_now increases, but shouldn't it be using less energy in battery mode since the screen is much dimmer and it's in power saving mode? (or is that normal behavior?) It also seems to drain more quickly than what it predicts, especially with the 1-1.25 hour drop in the first minute of being unplugged, which seems odd. What really concerns me is that Ubuntu 12.10 may not be properly managing the battery (with the sudden change in charge/life from 2:30 to 1:30 or 1:15 within a minute of unplugging), and that a new battery may quickly die under Ubuntu 12.10. I'd greatly appreciate any advice/suggestions on what to do, and especially whether there's a way to get back the 1-1.5 hrs of battery life that were suddenly lost when changing from WinXp to Ubuntu 12.10. Thanks :)

  Read the article

• Texture not drawing on cubes

  - by Christian Frantz

  I can draw the cubes fine but they are just solid black besides the occasional lighting that goes on. The basic effect is being set for each cube also. public void Draw(BasicEffect effect) { foreach (EffectPass pass in effect.CurrentTechnique.Passes) { pass.Apply(); device.SetVertexBuffer(vertexBuffer); device.Indices = indexBuffer; device.DrawIndexedPrimitives(PrimitiveType.TriangleList, 0, 0, 8, 0, 12); } } The cubes draw method. TextureEnabled is set to true in my main draw method. My texture is also loading fine. public Cube(GraphicsDevice graphicsDevice, Vector3 Position, Texture2D Texture) { device = graphicsDevice; texture = Texture; cubePosition = Position; effect = new BasicEffect(device); } The constructor seems fine too. Could this be caused by the Vector2's of my VertexPositionNormalTexture? Even if they were out of order something should still be drawn other than a black cube

  Read the article

• Bluetooth connectivity on Ubuntu 11.04

  - by Andy Wiz

  I tried to connect to a device via Bluetooth from my laptop running Ubuntu 11.04, and I have some difficulty. I had to write a script to restart the Bluetooth dongle (it does not activate Bluetooth automatically). An icon appears in the top status bar on Ubuntu (good). Pairing of the devices happen easily enough (good). Trying to view files on the device from the laptop, the window that comes up does not show the paired devices. There is a window, but it's too small, and you dont know which device is selected (bad). If you choose the wrong device (I only knew it was the wrong device when my cell phone lit up), the icon on the status bar disappears, and doesn't come back, even though the devices are still paired (bad). Does anyone have that problem, and is there a fix? A.

  Read the article

• Attempting to ping RPC endpoint 6001/6004 (Exchange Information Store) on server on Exchange2010

  - by MadBoy

  I have Exchange 2010 in hosting setup like: TMG 2010 as load balancer Exchange 2010 x 2 (CAS,MAILBOX,HUB on each server) AD1, AD2 machines File witness All people currently connect thru OWA or POP3/SMTP and that works fine. The problem is autodiscovery doesn't work and RPC in terms of setting up Outlook doesn't work too. It doesn't work if I am connected with VPN or not. The thing is it used to work. Before reinstall of my machine 2 days ago I was able to get mails successfully thru Outlook that was set up using autodiscovery (but I was getting reports setting up of new clients wasn't working - so not sure why my outlook continued to work). I used https://www.testexchangeconnectivity.com to track it down and basically the message is more or less this: Attempting to ping RPC endpoint 6004 (NSPI Proxy Interface) on server autodiscover.domain.pl. The attempt to ping the endpoint failed. Additional Details The RPC_S_SERVER_UNAVAILABLE error (0x6ba) was thrown by the RPC Runtime process. I tried different solutions like disabling IP v6, followed couple of links and did all they proposed and it's still at the very same point: C:\Users\admin>netstat -a | find "6001" TCP 0.0.0.0:6001 EXCHANGE2:0 LISTENING TCP [::]:6001 EXCHANGE2:0 LISTENING C:\Users\admin>netstat -a | find "6002" C:\Users\admin>netstat -a | find "6003" C:\Users\admin>netstat -a | find "6004" I followed (and few others): http://helewix.com/blog/index.php/Microsoft-Solutions/2011/02/10/exchange-2010-how-to-open-ports-6001-6002-and-6004-on-your-server-for-telnet-to-work-and-rpc-to-be-able-to-connect-2 http://blogs.technet.com/b/exchange/archive/2008/06/20/3405633.aspx http://messagexchange.blogspot.com/2008/12/outlook-anywhere-failing-rpc-end-points.html Although most relate to Exchange 2007 and I have Exchange 2010 but there's not much things I can find on Exchange 2010 for the current problem. After applying all of those solutions error 6004 changed into error 6001 which doesn't bring me to my problems any closer. At this point even thou error was 6001 and 6004 was no more the 6004 port was still closed while 6001 stayed open. Attempting to ping RPC endpoint 6001 (Exchange Information Store) on server autodiscover.domain.pl. The attempt to ping the endpoint failed. Additional Details The RPC_S_SERVER_UNAVAILABLE error (0x6ba) was thrown by the RPC Runtime process. C:\Users\admin>netstat -a | find "6001" TCP 0.0.0.0:6001 EXCHANGE2:0 LISTENING TCP [::]:6001 EXCHANGE2:0 LISTENING C:\Users\admin>netstat -a | find "6002" C:\Users\admin>netstat -a | find "6003" C:\Users\admin>netstat -a | find "6004" So I reverted back to square one. I suspect it's a problem with TMG but really can't be sure. I tried multiple combinations but all fail.

  Read the article

• Why isn't this rewrite rule (nginx) applied? (trying to setup Wordpress multisite)

  - by Brian Park

  Hi, I'm trying to setup Wordpress multisite (subfolder structure) with nginx, but having a problem with this rewrite rule. Below is the Apache's .htaccess, which I have to translate into nginx configuration. RewriteEngine On RewriteBase /blogs/ RewriteRule ^index\.php$ - [L] # uploaded files RewriteRule ^([_0-9a-zA-Z-]+/)?files/(.+) wp-includes/ms-files.php?file=$2 [L] # add a trailing slash to /wp-admin RewriteRule ^([_0-9a-zA-Z-]+/)?wp-admin$ $1wp-admin/ [R=301,L] RewriteCond %{REQUEST_FILENAME} -f [OR] RewriteCond %{REQUEST_FILENAME} -d RewriteRule ^ - [L] RewriteRule ^([_0-9a-zA-Z-]+/)?(wp-(content|admin|includes).*) $2 [L] RewriteRule ^([_0-9a-zA-Z-]+/)?(.*\.php)$ $2 [L] RewriteRule . index.php [L] Below is what I came up with: server { listen 80; server_name example.com; server_name_in_redirect off; expires 1d; access_log /srv/www/example.com/logs/access.log; error_log /srv/www/example.com/logs/error.log; root /srv/www/example.com/public; index index.html; try_files $uri $uri/ /index.html; # rewriting uploaded files rewrite ^/blogs/(.+/)?files/(.+) /blogs/wp-includes/ms-files.php?file=$2 last; # add a trailing slash to /wp-admin rewrite ^/blogs/(.+/)?wp-admin$ /blogs/$1wp-admin/ permanent; if (!-e $request_filename) { rewrite ^/blogs/(.+/)?(wp-(content|admin|includes).*) /blogs/$2 last; rewrite ^/blogs/(.+/)?(.*\.php)$ /blogs/$2 last; } location /blogs/ { index index.php; #try_files $uri $uri/ /blogs/index.php?q=$uri&$args; } location ~ \.php$ { include /etc/nginx/fastcgi_params; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /srv/www/example.com/public$fastcgi_script_name; } # static assets location ~* ^.+\.(manifest)$ { access_log /srv/www/example.com/logs/static.log; } location ~* ^.+\.(ico|ogg|ogv|svg|svgz|eot|otf|woff|mp4|ttf|css|rss|atom|js|jpg|jpeg|gif|png|ico|zip|tgz|gz|rar|bz2|doc|xls|exe|ppt|tar|mid|midi|wav|bmp|rtf)$ { # only set expires max IFF the file is a static file and exists if (-f $request_filename) { expires max; access_log /srv/www/example.com/logs/static.log; } } } In the above code, I believe rewrite ^/blogs/(.+/)?(.*\.php)$ /blogs/$2 last; has no effect because when I look at the access_log file, I see the following line: 2010/09/15 01:14:55 [error] 10166#0: *8 "/srv/www/example.com/public/blogs/test/index.php" is not found (2: No such file or directory), request: "GET /blogs/test/ HTTP/1.1" (Here, 'test' is the second blog created using multisite feature) What I'm expecting is that /blogs/test/index.php gets rewritten to /blogs/index.php, but it doesn't seem to do that... Am I overlooking something obvious? Thanks!

  Read the article

• Cannot move folder to a subdirectoy of itself - What's going on?

  - by calumbrodie

  O.K I am trying to do the following very simple command and it is failing as follows... mv '/home/admin/Downloads/folder1' '/home/admin/MyLibrary/MyVideos/TV/folder1/' mv: cannot move `/home/admin/Downloads/folder1' to a subdirectory of itself, `/home/admin/MyLibrary/MyVideos/TV/folder1/' The destination is NOT a subfolder of the source - why is it giving me this error?? Linux version is a custom version of Red Hat on a NAS box. Thanks

  Read the article

• Trying to change a Ubuntu user's password, authentication token manipulation error

  - by beagleguy

  I'm trying to create a local user on a new Ubuntu box. I'm unable to change the password, and I keep getting the error below. The user gets added to the shadow file, but I can't get it to set a password. How can this be fixed? admin@theserver:~$ sudo useradd jamz [sudo] password for admin: admin@theserver:~$ sudo passwd jamz passwd: Authentication token manipulation error passwd: password unchanged admin@theserver:~$

  Read the article

< Previous Page | 100 101 102 103 104 105 106 107 108 109 110 111  | Next Page >