Search Results

Search found 8888 results on 356 pages for 'disk'.

Page 104/356 | < Previous Page | 100 101 102 103 104 105 106 107 108 109 110 111  | Next Page >

• How to force Windows to call the partition it installs on C:?

  - by maaartinus

  I'm going to install Windows XP from a CD and want to make sure it calls the partition it lands on C:. The target partition is the first one on a SATA disk, which is not the first one in my computer. There's no IDE disk there. I don't think I can swap the disks, as I'm using a fake RAID and really don't want to get problems with it. The target partition is on a normal disk. I know it may be unimportant, but I don't want to run in any problems I can avoid. I've seen a question slightly related to it, but I'm not going to install from a USB.

  Read the article

• My pendrive is not working and showing Unknown file System

  - by Debabratta

  I have a pendrive when I insert it into one o my port it shows in the My Computer but when I try to explore, it shows please insert a disk into drive H. However my usb drive is well inserted. I tried to format it but it is showing There is no disk in drive H, Insert a disk then try again. Its properties is showing Unknown File System and the used space and free space part showing 0 bytes. I cann't also check for errors in the drive. Its device status:The device is working properly. I also reinstalled the driver but that did not help me. Please suggest some way to recover the issue. Thanks.

  Read the article

• Partition table damaged

  - by emaster70

  Hello, I'm currently in a terrible situation with my hdd: I was trying to install an OS side by side with my windows 7 x64 and I used the Paragon Partition Manager feature made for that. It disabled/hid/(damaged?) one of my partitions and now I can no longer access it. The partition, unfortunately, contains data I need to access urgently and I've got no backup. To complicate things even further I don't have another PC (I'm writing this msg from my iphone) and all I can rely on is a backtrac 4 disk (wkn't connect to my wifi, gets stuck obtaining IP address) and. Windows 7 x64 disk. Booting into windows fails with the pc hanging on the starting windows screen. Safe mode won't work either. Is there anything I can do? Here's the layout of the disk: Recovery partition Win partition Unallocated space (it's supposed to be my data partition) Other os partition (don't care about that, the installation of the other OS failed) Please help me, I'm desperate.

  Read the article

• slow software raid

  - by Jure1873

  I've got software raid 1 for / and /home and it seems I'm not getting the right speed out of it. Reading from md0 I get around 100 MB/sec Reading from sda or sdb I get around 95-105 MB/sec I thought I would get more speed (while reading data) from two drives. I don't know what is the problem. I'm using kernel 2.6.31-18 hdparm -tT /dev/md0 /dev/md0: Timing cached reads: 2078 MB in 2.00 seconds = 1039.72 MB/sec Timing buffered disk reads: 304 MB in 3.01 seconds = 100.96 MB/sec hdparm -tT /dev/sda /dev/sda: Timing cached reads: 2084 MB in 2.00 seconds = 1041.93 MB/sec Timing buffered disk reads: 316 MB in 3.02 seconds = 104.77 MB/sec hdparm -tT /dev/sdb /dev/sdb: Timing cached reads: 2150 MB in 2.00 seconds = 1075.94 MB/sec Timing buffered disk reads: 302 MB in 3.01 seconds = 100.47 MB/sec Edit: Raid 1

  Read the article

• How do I remove Windows Update uninstall files on Windows Server 2008?

  - by Robert Koritnik

  I'm running Windows Server 2008 Standard running in VMware. It has 2 disks: system disk: 16 GB data disk: 500 MB I installed Visual Studio 2008 SP1 + MSDN and some small tools and libraries that don't take much space. Over time the system disk's free space has been going down (I suspect because of regular system updates - NetFx (.NET), service packs, and regular updates). Questions 1 How do you remove Windows Update uninstall files from Windows Server 2008? Question 2 I also found lots of files in C:/Windows/Installer folder. Is it possible to determine which .msp file goes with which patch? I would like to delete some of them, because they do take a lot of space.

  Read the article

• 8400GS causes BSOD in Acer M1610 running Windows 7 32-bit

  - by Arch Angel

  Title says it all, just installed the Nvidia card, I know this is a driver related issue I just don't know how to fix it I cannot find a driver version that will work not even the one that windows selects for the card, or the one on the disk supplied with the card. Any help will be appreciated. BSOD output: What happens when I try to install Any driver that does install causes a BSOD the driver disk says it supports windows 7 and the drivers on the disk cause a BSOD too i'm at a loss of what to do. EDIT: Yes I uninstalled the intergrated drivers. PCIE x16 Card from Gainward Tried multiple driver versions Versions that wont install because they cannot pick up card 190.38, 191.07, 196.21, 197.45 Versions that install and cause BSOD 258.96, 260.99, The drivers on the disc (not sure of the version) and drivers from the gainward website (driver version 263.14)

  Read the article

• Renaming an Invalid Filename in NTFS

  - by Sadeq Dousti

  Recently, I loaned my flash disk to one of my friends, who had Mac OS. He copied a file on it, whose name included a backslash (\). The flash disk is NTFS formatted. Windows does not allow such filenames, and neither opens the file, nor deletes it, nor lets me delete the file. There are naive approaches to this problem, like: Formatting the flash disk; Giving it back to my friend and asking to rename it; Loading into some live Linux and renaming it. However, I'm looking for something more clever, like a program that can do the trick under Windows. PS: There's a tool called NTFSWalker which can browse the MFT records of the NTFS, but is unable to make any changes to them.

  Read the article

• Running ubuntu 10.04 without a laptop's primary display

  - by riteshmnayak

  I have an IBM thinkpad(R50e) whose display is broken. I would still like to use the laptop by connecting it to an external monitor and keyboard/mouse. This is what I did: Removed the hard disk from the broken IBM Put the hard disk in the working IBM and installed 10.04 on it. It booted fine and I installed many packages and stuff. I put the hard disk back into the broken display IBM thinking I could use it by connecting it to an external monitor that I own. Well, it turns out that while booting, the display shows up but because the display shifts from the VGA display to the primary display mid-boot, the laptop does not boot. Is there a way in which I can force the laptop to not use its primary display while booting. I looked at Randr and also grub.conf settings but nothing seemed to work. Please help!

  Read the article

• Prevent Windows 7 from unpluging External HDD [migrated]

  - by marverix

  I have installed Windows 7 as my media server. I pluged in 500GB external HDD via USB. I have changed power plan to Best Performance and changed advenced power settings to never turn off HDD etc. I even yesterday wrote powershell script (create and delete folder on this disk) and I have added it to harmonogram to run every 5 minutes starting from system boot. And nothing! Disk after some time (I realy can't say when) is turning off and Windows show "Unknown Device" in Device Manager. Then only system reboot or disk reboot helps. Any ideas how to prevent Windows 7 from stopping my external HDD? Cheers!

  Read the article

• How to Extending a logical volume in WMWare

  - by Mercer

  down vote favorite i have a CentOS 6.3 into my Virtual Machine. I have 2 Disk: Disk#1 = 18G Disk#2 = 20G [root@vm ~]# df -h Filesystem Filesystem Size Used Avail Use% Mounted on /dev/mapper/vg_system-lv_root 1008M 250M 708M 27% / tmpfs 1.9G 0 1.9G 0% /dev/shm /dev/sda1 194M 31M 154M 17% /boot /dev/mapper/vg_system-lv_home 504M 17M 462M 4% /home /dev/mapper/vg_system-lv_opt 2.0G 68M 1.9G 4% /opt /dev/mapper/vg_produits-lv_grid 6.9G 2.5G 4.1G 38% /opt/grid /dev/mapper/vg_produits-lv_oracle 6.9G 144M 6.4G 3% /opt/oracle /dev/mapper/vg_system-lv_tmp 2.8G 71M 2.6G 3% /tmp /dev/mapper/vg_system-lv_usr 2.5G 1.6G 799M 67% /usr /dev/mapper/vg_system-lv_var 2.0G 278M 1.6G 15% /var So i want to extend my /tmp and my /opt/oracle like this: 10Go in/tmp 13Go in /opt/oracle Thx.

  Read the article

• Restoring factory recovery partition (samsung)

  - by user974896

  I have upgraded the HDD in a Samsung laptop and would like to restore the "Press F4 for recovery" partition. My new disk has three partitions, System, Windows, and Recovery. I did a dd of the recovery partition from the old HDD to the new. I also set the diag flag on the new HDD. F4 recovery still is not working. tldr: I mapped my new disk like my old disk with the exception of exact sizes. I did the recover partition from old to new via livecd. F4 recovery does not work

  Read the article

• Database implementation question?

  - by gundam

  consider a disk with a sector size of 512 bytes, 2000 tracks/surface, 50 sectors/track, 5 doubled sided platters, average seek time is 10 msec. Assume a block size of 1024-byte is selected. Assume a file that contains 100,000 records of 100-byte each is to be stored on the disk, and NONE of the reocd can be spanned 2 blocks. How many blocks are needed to store the entire file?? If the file is arranged sequentially on disk, how many surfaces are required?? Now, i have calculated that 10,000 blocks are needed to store 100,000 records. But i am not sure how to find out the answer of the surfaces required. I only calculated the capacity of track is 25KB and capacity of surface is 50,000 KB But I don't know how to calculate the number of surfaces... Could anyone help me how to get the answer? Thanks a lot!!

  Read the article

• Mimicking Google's Persistent Disks -- Is this a logical FreeBSD disaster recovery strategy?

  - by Casey Jordan

  I am looking into FreeBSD to provide a more comprehensive backup and disaster recovery strategy for database servers. Ideally I want to mimic what google is doing with "Persistent disks" https://developers.google.com/compute/docs/disks#snapshots I am hoping someone who knows more about FreeBSD can validate these ideas/questions: I have read that FreeBSD can take instant disk snapshots, therefore if our databases trigger a consistent state (Block all writes, and flush buffers to disk), I would assume I could take snapshots every hour without service interruption for more than a few seconds. Is this true? Is there a way to take snapshots and back them up offsite easily? Can this be done incrementally as to save how much disk space is actually used? If a rollback needed to be done, how long does this typically take? Is a rollback also instantaneous? Thanks!

  Read the article

• Is it possible to create a Mirror or Stripe volume for the boot partition in Windows 2008/R2?

  - by Georgios

  Hello, I have a server with two identical disks and I have installed Windows Server 2008 R2 on C, which is a 60GB volume on Disk 0. Using the disk manager, I have attempted to create both a Mirror and Stripe volume in Disk 1 but every time I get the same error "No extents found in the plex". This error occurs after Windows has converted both disks to Dynamic. The fact that the manager allows me to attempt to do this would point to the fact that this is possible. However I have been unable to find any solutions to this error. Any ideas on how to solve this? Thanks Georgios

  Read the article

• How to use HFS formatted pen drive in Windows 7?

  - by row-sun

  I recently used disk utility in my mac book pro to format my 8 GB pen drive to install OS X. After that I formatted my pen drive from disk utility as FAT32 so that I would be able to use it in windows. But in windows the pen drive does not show up. When I right click on my computer and click manage and then disk management, the pen drive is listed there, but it doesn't show up in the explorer and I cant use it. I tried to do many things but I'm still not being able to use it in windows though I can use it in Mac OS X. Could anyone help? Thanks.

  Read the article

• Occasional HDD Related Hangs

  - by diolemo

  I have an issue that seems to be disk related. Occasionally my system will block for 30 or so seconds and is mostly unresponsive. Those things already in memory requiring no disk access continue to function but those things requiring disk access (even small) hang. 30 seconds later everything is back to normal. I have 2 Samsung drives in RAID 0. I have 1 WD drive (has pagefile) I have an SSD used for caching (Intel Smart Response). This is a new install of Windows and the drives were fine in my old PC (~1 month ago). Has anyone experienced anything similar? Any suggestions to solve this one? Thanks in advance.

  Read the article

• Database implementation question? [closed]

  - by gundam

  consider a disk with a sector size of 512 bytes, 2000 tracks/surface, 50 sectors/track, 5 doubled sided platters, average seek time is 10 msec. Assume a block size of 1024-byte is selected. Assume a file that contains 100,000 records of 100-byte each is to be stored on the disk, and NONE of the reocd can be spanned 2 blocks. How many blocks are needed to store the entire file?? If the file is arranged sequentially on disk, how many surfaces are required?? Now, i have calculated that 10,000 blocks are needed to store 100,000 records. But i am not sure how to find out the answer of the surfaces required. I only calculated the capacity of track is 25KB and capacity of surface is 50,000 KB But I don't know how to calculate the number of surfaces... Could anyone help me how to get the answer? Thanks a lot!!

  Read the article

• Trouble loading an ISO

  - by crocyson

  I've created a boot disk and ISO image with paragon. I boot up the Virtual pc with the disk in and I get to my recovery page. When I am supposed to select an ISO image? My Virtual PC doesn't acknowledge any of my physical hard drives on my host PC. I've also tried copy/paste the files into my datastore and they do not show up. I've tried the option during the set up to start with the ISO but again I am not able to browse to my external hard drive that I have stored the ISO on. VMWare will acknowledge it and say that it is connected but I can't browse to it. Am I doing something wrong? I created the back up disk and ISO image on the external with paragon.

  Read the article

• Windows 7 System Image Restore to SSD - SSD not detected?

  - by steviey

  I recently bought a new SSD (OCZ Vertex 2 120GB) as a replacement for my laptop HDD . I created a System Image on an external drive using the Win 7 backup and restore tool and then restored this image to the SSD using the Win 7 disk. AHCI is enabled in Win 7 and the BIOS, but it seems that windows is not detecting the disk as an SSD because, in the defragger, the disk is still available for defragging. Prefetch and Superfetch were also still enabled. I have manually disabled scheduled defragging, prefetch and superfetch. I have also checked that TRIM is enabled using: fsutil behavior query DisableDeleteNotify and the result is '0' (it is). Performance seems ok, but not quite as fast as I expected. Was restoring from a win7 generated system image a mistake? Am I getting optimal SSD performance?

  Read the article

• After deleting log files, Ubuntu server still saying there is no space

  - by Mark

  My Ubuntu server has stopped due to a lack of disk space. I deleted some log files which has grown huge very quickly. But df -h still shows I have no space left. When I run du -sh /* I can see that I should have plenty of disk space left after deleting the logs. I ran lsof +L1 and it brought up two files: /var/log/mail.log and /var/log/mail.err. These are two logs I had deleted. I restarted apache, postfix and mysql (mysql wont restart because of lack of disk space, it think) but still df -h shows no space.

  Read the article

• Mimicking Google's Persistant Disks -- Is this a logical FreeBSD disaster recovery strategy?

  - by Casey Jordan

  I am looking into FreeBSD to provide a more comprehensive backup and disaster recovery strategy for database servers. Ideally I want to mimic what google is doing with "Persistant disks" https://developers.google.com/compute/docs/disks#snapshots I am hoping someone who knows more about FreeBSD can validate these ideas/questions: I have read that FreeBSD can take instant disk snapshots, therefore if our databases trigger a consistent state (Block all writes, and flush buffers to disk), I would assume I could take snapshots every hour without service interruption for more than a few seconds. Is this true? Is there a way to take snapshots and back them up offsite easily? Can this be done incrementally as to save how much disk space is actually used? If a rollback needed to be done, how long does this typically take? Is a rollback also instantaneous? Thanks!

  Read the article

• LVM vs RAID0 vs RAID "linear" - Combine 2 disks as one, data recovery?

  - by leto

  Hi there, given two 2TB USB external disks that have to be combined to one 4TB volume and formatted with one big Filesystem (XFS), I have a small question to ask. Does LVM provide better Data recovery, should one disk be unplugged/damaged by being able to recover the data of the still working disk or is everything lost? I would appreciate a solution where only the data of one disk is lost and I can recover the content of the other with the usual filesystem/lvm/raid tools. Is that possible with LVM or RAID "linear"? This is for storing unimportant files that can be retrieved from backup, but I want to save time :) Thank you in advance

  Read the article

• recovering vm data from crashed XenServer install

  - by user58983

  We're using xenserver 5.6 from citrix to run our virtual machines. The box is old and creaky, and the hard drive went. (We had a super limited budget of $0 at the time). Turns out the only machine on there we actually needed, was the only one not backed up... anyway, we've replace the hard drive, and reinstalled xensever. however while trying to find our old vm disk images, i have no idea where they sit, and i'm beginning to think they're on a lvm partition? is there anyway to access the disk images from the old vm's on this hard disk, which is attached to the xenserver machine via a usb-sata converter?

  Read the article

• Accessing a broken mdadm raid

  - by CarstenCarsten

  Hi! I used a western digital mybookworld (SOHO NAS storage using Linux) as backup for my Linux box. Suddenly, the mybookworld does not boot up any more. So I opened the box, removed the hard disk and put the hard disk into an external USB HDD case, and connected it to my Linux box. [ 530.640301] usb 2-1: new high speed USB device using ehci_hcd and address 3 [ 530.797630] scsi7 : usb-storage 2-1:1.0 [ 531.794844] scsi 7:0:0:0: Direct-Access WDC WD75 00AAKS-00RBA0 PQ: 0 ANSI: 2 [ 531.796490] sd 7:0:0:0: Attached scsi generic sg3 type 0 [ 531.797966] sd 7:0:0:0: [sdc] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 531.800317] sd 7:0:0:0: [sdc] Write Protect is off [ 531.800327] sd 7:0:0:0: [sdc] Mode Sense: 38 00 00 00 [ 531.800333] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 531.803821] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 531.803836] sdc: sdc1 sdc2 sdc3 sdc4 [ 531.815831] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 531.815842] sd 7:0:0:0: [sdc] Attached SCSI disk The dmesg output looks normal, but I was wondering why the hardisk was not mounted at all. And why there are 4 different partitions on it. fdisk showed the following: root@ubuntu:/home/ubuntu# fdisk /dev/sdc WARNING: DOS-compatible mode is deprecated. It's strongly recommended to switch off the mode (command 'c') and change display units to sectors (command 'u'). Command (m for help): p Disk /dev/sdc: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00007c00 Device Boot Start End Blocks Id System /dev/sdc1 4 369 2939895 fd Linux raid autodetect /dev/sdc2 370 382 104422+ fd Linux raid autodetect /dev/sdc3 383 505 987997+ fd Linux raid autodetect /dev/sdc4 506 91201 728515620 fd Linux raid autodetect Oh no! Everything seems to be created as a mdadm software raid. Calling mdadm --examine with the different partitions seems to affirm that. I think the only partition I am interested in, is /dev/sdc4 (because it is the largest). But nevertheless I called mdadm --examine with every partition. root@ubuntu:/home/ubuntu# mdadm --examine /dev/sdc1 /dev/sdc1: Magic : a92b4efc Version : 00.90.00 UUID : 5626a2d8:070ad992:ef1c8d24:cd8e13e4 Creation Time : Wed Feb 20 00:57:49 2002 Raid Level : raid1 Used Dev Size : 2939776 (2.80 GiB 3.01 GB) Array Size : 2939776 (2.80 GiB 3.01 GB) Raid Devices : 2 Total Devices : 1 Preferred Minor : 1 Update Time : Sun Nov 21 11:05:27 2010 State : clean Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Checksum : 4c90bc55 - correct Events : 16682 Number Major Minor RaidDevice State this 0 8 1 0 active sync /dev/sda1 0 0 8 1 0 active sync /dev/sda1 1 1 0 0 1 faulty removed root@ubuntu:/home/ubuntu# mdadm --examine /dev/sdc2 /dev/sdc2: Magic : a92b4efc Version : 00.90.00 UUID : 9734b3ee:2d5af206:05fe3413:585f7f26 Creation Time : Wed Feb 20 00:57:54 2002 Raid Level : raid1 Used Dev Size : 104320 (101.89 MiB 106.82 MB) Array Size : 104320 (101.89 MiB 106.82 MB) Raid Devices : 2 Total Devices : 1 Preferred Minor : 2 Update Time : Wed Oct 27 20:19:08 2010 State : clean Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Checksum : 55560b40 - correct Events : 9884 Number Major Minor RaidDevice State this 0 8 2 0 active sync /dev/sda2 0 0 8 2 0 active sync /dev/sda2 1 1 0 0 1 faulty removed root@ubuntu:/home/ubuntu# mdadm --examine /dev/sdc3 /dev/sdc3: Magic : a92b4efc Version : 00.90.00 UUID : 08f30b4f:91cca15d:2332bfef:48e67824 Creation Time : Wed Feb 20 00:57:54 2002 Raid Level : raid1 Used Dev Size : 987904 (964.91 MiB 1011.61 MB) Array Size : 987904 (964.91 MiB 1011.61 MB) Raid Devices : 2 Total Devices : 1 Preferred Minor : 3 Update Time : Sun Nov 21 11:05:27 2010 State : clean Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Checksum : 39717874 - correct Events : 73678 Number Major Minor RaidDevice State this 0 8 3 0 active sync 0 0 8 3 0 active sync 1 1 0 0 1 faulty removed root@ubuntu:/home/ubuntu# mdadm --examine /dev/sdc4 /dev/sdc4: Magic : a92b4efc Version : 00.90.00 UUID : febb75ca:e9d1ce18:f14cc006:f759419a Creation Time : Wed Feb 20 00:57:55 2002 Raid Level : raid1 Used Dev Size : 728515520 (694.77 GiB 746.00 GB) Array Size : 728515520 (694.77 GiB 746.00 GB) Raid Devices : 2 Total Devices : 1 Preferred Minor : 4 Update Time : Sun Nov 21 11:05:27 2010 State : clean Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Checksum : 2f36a392 - correct Events : 519320 Number Major Minor RaidDevice State this 0 8 4 0 active sync 0 0 8 4 0 active sync 1 1 0 0 1 faulty removed If I read the output correctly everything was removed, because it was faulty. Is there ANY way to see the contents of the largest partition? Or seeing somehow which files are broken? I see that everything is raid1 which is only mirroring, so this should be a normal partition. I am anxious to do anything with mdadm, in fear that I destroy the data on the hard disk. I would be very thankful for any help.

  Read the article

• OS X Leopard (10.5) Server -- Unwanted Emails

  - by David

  Our OS X Leopard (10.5) server is sending out an email EVERY DAY for a Disk Full Notification on an external HDD we use for Time Machine backups (which manages it's own disk space, so the disk full notifications are useless). In the Server Admin app, under Settings Notifications, there's this: which is clearly disabled. The email header and message: http://pastebin.com/V5PZ3Phk I've been told to check the mail.log, but it's mostly empty (except for a few logs in 2011 saying "Postfix mail system is not running". I've also been told to check the crontabs, but I'm not sure how to do that on OS X (or any OS for that matter). Can someone explain how to do this? Also, if there's any other suggestions on places/things/etc to look at/for, my ears are all open!

  Read the article

< Previous Page | 100 101 102 103 104 105 106 107 108 109 110 111  | Next Page >